3 - Fix the issue with verification of clients when using multiple
4 'tls' config blocks (RADSECPROXY-43) for DTLS too. Reported by
9 - When verifying clients, don't consider config blocks with CA
10 settings ('tls') which differ from the one used for verifying the
11 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
15 - Make naptr-eduroam.sh check NAPTR type case insensitively.
16 Fix from Adam Osuchowski.
20 - The default shared secret for TLS and DTLS connections change
21 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
22 section 2.3 (4). Please make sure to specify a secret in both
23 client and server blocks to avoid unwanted surprises.
25 - The default place to look for a configuration file has changed
26 from /etc to /usr/local/etc. Let radsecproxy know where your
27 configuration file can be found by using the `-c' command line
28 option. Or configure radsecproxy with --sysconfdir=/etc to
29 restore the old behaviour. (RADSECPROXY-31)
32 - Improved F-Ticks logging options. F-Ticks can now be sent to a
33 separate syslog facility and the VISINST label can now be
34 configured explicitly. This was implemented by Maja
35 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
36 - New config option PidFile. (RADSECPROXY-32)
37 - Preliminary support for DynamicLookupCommand added. It's for
38 TLS servers only at this point. Also, beware of risks for memory
39 leaks. In addition to this, for extra adventurous users, there's
40 a new configure option --enable-experimental-dyndisc which enables
41 even more new code for handling of dynamic discovery of TLS
43 - Address family (IPv4 or IPv6) can now be specified for clients
44 and servers. (RADSECPROXY-37)
47 - Stop the autoconfery from warning about defining variables
48 conditionally and unconditionally.
49 - Honour configure option --sysconfdir. (RADSECPROXY-31)
50 - Don't crash on failing DynamicLookupCommand scripts. Fix made
51 with help from Ralf Paffrath. (RADSECPROXY-33)
52 - When a DynamicLookupCommand script is failing, fall back to
53 other server(s) in the realm. The timeout depends on the kind of
55 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
59 - Support for F-Ticks logging.
60 - New binary radsecproxy-hash.
61 - A DynamicLookupCommand script can now signal "server not found"
62 by exiting with code 10. The scripts in the tools directory now
66 - catgconf renamed to radsecproxy-conf.
69 - All compiler warnings removed. Now compiling with -Werror.
73 - The default secret for TLS and DTLS will change in a future
74 release. Please make sure to specify a secret in both client and
75 server blocks to avoid surprises.
78 - Debug printout issue.
82 - Don't disable OpenSSL session caching for 0.9.8p and newer in
84 - Detect OpenSSL version at runtime rather than at compile time.
88 - OpenSSL session caching is disabled when built against OpenSSL
89 older than 1.0.0b to mitigate possible effects of
90 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
91 - Crash bug when reading improper config file fixed.
95 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
96 to keep the same behaviour as in previous versions of radsecproxy,
97 those who have LogLevel set to 4 need to change this to 5. Log
98 levels 1, 2 and 3 are unaffected.
100 New features and various improvements:
101 - LoopPrevention per server has been added.
102 - AddVendorAttribute rewrite configuration has been added.
103 - New log level, DBG_NOTICE, added.
104 - Diagnostics improved for errors resulting from failing syscalls.
105 - Removed all compiler warnings (compiling with -Wall).
108 - A UDP fragmentation issue.
109 - Build on Solaris when compiling with gcc.
110 - A bug in pwdencrypt() with passwords of a length greater than
114 Fixed header files for FreeBSD
115 Fix for multiple UDP servers on same IP address, solves accounting
119 Fixed some very minor bugs
120 Changed log levels for some messages, made loglevel 2 default
123 Client and Server blocks may contain multiple host options.
124 Configure (Makefile) options for specifying which transports
125 should be supported in a build.
128 Support for TCP and DTLS transports (type tcp, type dtls)
129 Listen... options can be specified multiple times
130 Dynamic server discovery
131 DuplicateInterval option in client block for specifying for how
132 long a request/reply shall be stored for duplicate detection
133 Support for RADIUS TTL (hopcount) attribute. Decrements value of
134 the TTL attribute if present, discards message if becomes 0.
135 If addTTL option is used, the TTL attribute is added with the
136 specified value if the forwarded message does not have one.
137 PolicyOID option can be used to require certain CA policies.
140 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
141 Old options deprecated but available for backwards compatiblity
142 Logging reply-message attribute from Reject messages
143 Contribution from Arne Schwabe
144 Rewrite blocks have new options addAttribute and modifyAttribute
145 rewriteIn (replacing rewrite) and rewriteOut in client and server
146 blocks for specifying rewrite on input/output. rewrite deprecated
147 but available as an alias for rewriteIn for backwards compatibility.
148 rewritein rewriteout rewrite
149 regular expressions in realms etc can now be more advanced, including
151 cacheExpiry option in tls blocks for specifying expiry time for the
152 cache of CA certificates and CRLs. This is particularly useful for
153 regularly updating CRLs.
154 Some logging has been made more informative
157 Logging stationid attribute
158 Added LoopPrevention option
159 Failover also without status-server
160 Options for RetryCount and RetryInterval
161 Working accounting and AccountingResponse option
162 CRL checking and option for enabling it
165 No longer looks for radsecproxy.conf in current directory
166 Rewrite block that allows removal of specified attributes
167 certificateNameCheck option for disabling CN/SubjectAltName check
168 matchCertificateAttribute now also supports CN matching
169 Forwarding of accounting messages, accountingServer option for realms
170 Supports multiple client blocks for same source address with different
172 Removed weekday from log timestamps
175 Pretend option for validating configuration
176 Include option for including additional config files
177 Allows clients configured by IP prefix, dynamic clients
178 Server failover support
179 Rewriting of username attribute
180 Source address and port can be specified for requests
183 Fixed crash when servers were configured after first realm block