3 - Fix the issue with verification of clients when using multiple
4 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
5 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
6 1.6.2). Reported by Raphael Geissert.
10 - When verifying clients, don't consider config blocks with CA
11 settings ('tls') which differ from the one used for verifying the
12 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
16 - Make naptr-eduroam.sh check NAPTR type case insensitively.
17 Fix from Adam Osuchowski.
21 - The default shared secret for TLS and DTLS connections change
22 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
23 section 2.3 (4). Please make sure to specify a secret in both
24 client and server blocks to avoid unwanted surprises.
26 - The default place to look for a configuration file has changed
27 from /etc to /usr/local/etc. Let radsecproxy know where your
28 configuration file can be found by using the `-c' command line
29 option. Or configure radsecproxy with --sysconfdir=/etc to
30 restore the old behaviour. (RADSECPROXY-31)
33 - Improved F-Ticks logging options. F-Ticks can now be sent to a
34 separate syslog facility and the VISINST label can now be
35 configured explicitly. This was implemented by Maja
36 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
37 - New config option PidFile. (RADSECPROXY-32)
38 - Preliminary support for DynamicLookupCommand added. It's for
39 TLS servers only at this point. Also, beware of risks for memory
40 leaks. In addition to this, for extra adventurous users, there's
41 a new configure option --enable-experimental-dyndisc which enables
42 even more new code for handling of dynamic discovery of TLS
44 - Address family (IPv4 or IPv6) can now be specified for clients
45 and servers. (RADSECPROXY-37)
48 - Stop the autoconfery from warning about defining variables
49 conditionally and unconditionally.
50 - Honour configure option --sysconfdir. (RADSECPROXY-31)
51 - Don't crash on failing DynamicLookupCommand scripts. Fix made
52 with help from Ralf Paffrath. (RADSECPROXY-33)
53 - When a DynamicLookupCommand script is failing, fall back to
54 other server(s) in the realm. The timeout depends on the kind of
56 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
60 - Support for F-Ticks logging.
61 - New binary radsecproxy-hash.
62 - A DynamicLookupCommand script can now signal "server not found"
63 by exiting with code 10. The scripts in the tools directory now
67 - catgconf renamed to radsecproxy-conf.
70 - All compiler warnings removed. Now compiling with -Werror.
74 - The default secret for TLS and DTLS will change in a future
75 release. Please make sure to specify a secret in both client and
76 server blocks to avoid surprises.
79 - Debug printout issue.
83 - Don't disable OpenSSL session caching for 0.9.8p and newer in
85 - Detect OpenSSL version at runtime rather than at compile time.
89 - OpenSSL session caching is disabled when built against OpenSSL
90 older than 1.0.0b to mitigate possible effects of
91 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
92 - Crash bug when reading improper config file fixed.
96 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
97 to keep the same behaviour as in previous versions of radsecproxy,
98 those who have LogLevel set to 4 need to change this to 5. Log
99 levels 1, 2 and 3 are unaffected.
101 New features and various improvements:
102 - LoopPrevention per server has been added.
103 - AddVendorAttribute rewrite configuration has been added.
104 - New log level, DBG_NOTICE, added.
105 - Diagnostics improved for errors resulting from failing syscalls.
106 - Removed all compiler warnings (compiling with -Wall).
109 - A UDP fragmentation issue.
110 - Build on Solaris when compiling with gcc.
111 - A bug in pwdencrypt() with passwords of a length greater than
115 Fixed header files for FreeBSD
116 Fix for multiple UDP servers on same IP address, solves accounting
120 Fixed some very minor bugs
121 Changed log levels for some messages, made loglevel 2 default
124 Client and Server blocks may contain multiple host options.
125 Configure (Makefile) options for specifying which transports
126 should be supported in a build.
129 Support for TCP and DTLS transports (type tcp, type dtls)
130 Listen... options can be specified multiple times
131 Dynamic server discovery
132 DuplicateInterval option in client block for specifying for how
133 long a request/reply shall be stored for duplicate detection
134 Support for RADIUS TTL (hopcount) attribute. Decrements value of
135 the TTL attribute if present, discards message if becomes 0.
136 If addTTL option is used, the TTL attribute is added with the
137 specified value if the forwarded message does not have one.
138 PolicyOID option can be used to require certain CA policies.
141 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
142 Old options deprecated but available for backwards compatiblity
143 Logging reply-message attribute from Reject messages
144 Contribution from Arne Schwabe
145 Rewrite blocks have new options addAttribute and modifyAttribute
146 rewriteIn (replacing rewrite) and rewriteOut in client and server
147 blocks for specifying rewrite on input/output. rewrite deprecated
148 but available as an alias for rewriteIn for backwards compatibility.
149 rewritein rewriteout rewrite
150 regular expressions in realms etc can now be more advanced, including
152 cacheExpiry option in tls blocks for specifying expiry time for the
153 cache of CA certificates and CRLs. This is particularly useful for
154 regularly updating CRLs.
155 Some logging has been made more informative
158 Logging stationid attribute
159 Added LoopPrevention option
160 Failover also without status-server
161 Options for RetryCount and RetryInterval
162 Working accounting and AccountingResponse option
163 CRL checking and option for enabling it
166 No longer looks for radsecproxy.conf in current directory
167 Rewrite block that allows removal of specified attributes
168 certificateNameCheck option for disabling CN/SubjectAltName check
169 matchCertificateAttribute now also supports CN matching
170 Forwarding of accounting messages, accountingServer option for realms
171 Supports multiple client blocks for same source address with different
173 Removed weekday from log timestamps
176 Pretend option for validating configuration
177 Include option for including additional config files
178 Allows clients configured by IP prefix, dynamic clients
179 Server failover support
180 Rewriting of username attribute
181 Source address and port can be specified for requests
184 Fixed crash when servers were configured after first realm block