3 - The default shared secret for TLS and DTLS connections change
4 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
5 section 2.3 (4). Please make sure to specify a secret in both
6 client and server blocks to avoid unwanted surprises.
8 - The default place to look for a configuration file has changed
9 from /etc to /usr/local/etc. Let radsecproxy know where your
10 configuration file can be found by using the `-c' command line
11 option. Or configure radsecproxy with --sysconfdir=/etc to
12 restore the old behaviour. (RADSECPROXY-31)
15 - Improved F-Ticks logging options. F-Ticks can now be sent to a
16 separate syslog facility and the VISINST label can now be
17 configured explicitly. This was implemented by Maja
18 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
19 - New config option PidFile. (RADSECPROXY-32)
20 - Preliminary support for DynamicLookupCommand added. It's for
21 TLS servers only at this point. Also, beware of risks for memory
22 leaks. In addition to this, for extra adventurous users, there's
23 a new configure option --enable-experimental-dyndisc which enables
24 even more new code for handling of dynamic discovery of TLS
26 - Address family (IPv4 or IPv6) can now be specified for clients
27 and servers. (RADSECPROXY-37)
30 - Stop the autoconfery from warning about defining variables
31 conditionally and unconditionally.
32 - Honour configure option --sysconfdir. (RADSECPROXY-31)
33 - Don't crash on failing DynamicLookupCommand scripts. Fix made
34 with help from Ralf Paffrath. (RADSECPROXY-33)
35 - When a DynamicLookupCommand script is failing, fall back to
36 other server(s) in the realm. The timeout depends on the kind of
38 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
42 - Support for F-Ticks logging.
43 - New binary radsecproxy-hash.
44 - A DynamicLookupCommand script can now signal "server not found"
45 by exiting with code 10. The scripts in the tools directory now
49 - catgconf renamed to radsecproxy-conf.
52 - All compiler warnings removed. Now compiling with -Werror.
56 - The default secret for TLS and DTLS will change in a future
57 release. Please make sure to specify a secret in both client and
58 server blocks to avoid surprises.
61 - Debug printout issue.
65 - Don't disable OpenSSL session caching for 0.9.8p and newer in
67 - Detect OpenSSL version at runtime rather than at compile time.
71 - OpenSSL session caching is disabled when built against OpenSSL
72 older than 1.0.0b to mitigate possible effects of
73 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
74 - Crash bug when reading improper config file fixed.
78 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
79 to keep the same behaviour as in previous versions of radsecproxy,
80 those who have LogLevel set to 4 need to change this to 5. Log
81 levels 1, 2 and 3 are unaffected.
83 New features and various improvements:
84 - LoopPrevention per server has been added.
85 - AddVendorAttribute rewrite configuration has been added.
86 - New log level, DBG_NOTICE, added.
87 - Diagnostics improved for errors resulting from failing syscalls.
88 - Removed all compiler warnings (compiling with -Wall).
91 - A UDP fragmentation issue.
92 - Build on Solaris when compiling with gcc.
93 - A bug in pwdencrypt() with passwords of a length greater than
97 Fixed header files for FreeBSD
98 Fix for multiple UDP servers on same IP address, solves accounting
102 Fixed some very minor bugs
103 Changed log levels for some messages, made loglevel 2 default
106 Client and Server blocks may contain multiple host options.
107 Configure (Makefile) options for specifying which transports
108 should be supported in a build.
111 Support for TCP and DTLS transports (type tcp, type dtls)
112 Listen... options can be specified multiple times
113 Dynamic server discovery
114 DuplicateInterval option in client block for specifying for how
115 long a request/reply shall be stored for duplicate detection
116 Support for RADIUS TTL (hopcount) attribute. Decrements value of
117 the TTL attribute if present, discards message if becomes 0.
118 If addTTL option is used, the TTL attribute is added with the
119 specified value if the forwarded message does not have one.
120 PolicyOID option can be used to require certain CA policies.
123 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
124 Old options deprecated but available for backwards compatiblity
125 Logging reply-message attribute from Reject messages
126 Contribution from Arne Schwabe
127 Rewrite blocks have new options addAttribute and modifyAttribute
128 rewriteIn (replacing rewrite) and rewriteOut in client and server
129 blocks for specifying rewrite on input/output. rewrite deprecated
130 but available as an alias for rewriteIn for backwards compatibility.
131 rewritein rewriteout rewrite
132 regular expressions in realms etc can now be more advanced, including
134 cacheExpiry option in tls blocks for specifying expiry time for the
135 cache of CA certificates and CRLs. This is particularly useful for
136 regularly updating CRLs.
137 Some logging has been made more informative
140 Logging stationid attribute
141 Added LoopPrevention option
142 Failover also without status-server
143 Options for RetryCount and RetryInterval
144 Working accounting and AccountingResponse option
145 CRL checking and option for enabling it
148 No longer looks for radsecproxy.conf in current directory
149 Rewrite block that allows removal of specified attributes
150 certificateNameCheck option for disabling CN/SubjectAltName check
151 matchCertificateAttribute now also supports CN matching
152 Forwarding of accounting messages, accountingServer option for realms
153 Supports multiple client blocks for same source address with different
155 Removed weekday from log timestamps
158 Pretend option for validating configuration
159 Include option for including additional config files
160 Allows clients configured by IP prefix, dynamic clients
161 Server failover support
162 Rewriting of username attribute
163 Source address and port can be specified for requests
166 Fixed crash when servers were configured after first realm block