3 - Threads are allocated with a 32 KB stack rather than what
4 happens to be the default. Patch by Fabian Mauchle.
5 - On systems with mallopt(3), freed memory is returned to the
6 system more aggressively. Patch by Fabian Mauchle.
9 - The duplication cache is purged properly. Patch by Fabian
11 - Stop freeing a shared piece of memory manifesting itself as a
12 crash when using dynamic discovery. Patch by Fabian Mauchle.
13 - Closing and freeing TLS clients properly. Patch by Fabian
18 - Fix the issue with verification of clients when using multiple
19 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
20 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
21 1.6.2). Reported by Raphael Geissert.
25 - When verifying clients, don't consider config blocks with CA
26 settings ('tls') which differ from the one used for verifying the
27 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
31 - Make naptr-eduroam.sh check NAPTR type case insensitively.
32 Fix from Adam Osuchowski.
36 - The default shared secret for TLS and DTLS connections change
37 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
38 section 2.3 (4). Please make sure to specify a secret in both
39 client and server blocks to avoid unwanted surprises.
41 - The default place to look for a configuration file has changed
42 from /etc to /usr/local/etc. Let radsecproxy know where your
43 configuration file can be found by using the `-c' command line
44 option. Or configure radsecproxy with --sysconfdir=/etc to
45 restore the old behaviour. (RADSECPROXY-31)
48 - Improved F-Ticks logging options. F-Ticks can now be sent to a
49 separate syslog facility and the VISINST label can now be
50 configured explicitly. This was implemented by Maja
51 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
52 - New config option PidFile. (RADSECPROXY-32)
53 - Preliminary support for DynamicLookupCommand added. It's for
54 TLS servers only at this point. Also, beware of risks for memory
55 leaks. In addition to this, for extra adventurous users, there's
56 a new configure option --enable-experimental-dyndisc which enables
57 even more new code for handling of dynamic discovery of TLS
59 - Address family (IPv4 or IPv6) can now be specified for clients
60 and servers. (RADSECPROXY-37)
63 - Stop the autoconfery from warning about defining variables
64 conditionally and unconditionally.
65 - Honour configure option --sysconfdir. (RADSECPROXY-31)
66 - Don't crash on failing DynamicLookupCommand scripts. Fix made
67 with help from Ralf Paffrath. (RADSECPROXY-33)
68 - When a DynamicLookupCommand script is failing, fall back to
69 other server(s) in the realm. The timeout depends on the kind of
71 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
75 - Support for F-Ticks logging.
76 - New binary radsecproxy-hash.
77 - A DynamicLookupCommand script can now signal "server not found"
78 by exiting with code 10. The scripts in the tools directory now
82 - catgconf renamed to radsecproxy-conf.
85 - All compiler warnings removed. Now compiling with -Werror.
89 - The default secret for TLS and DTLS will change in a future
90 release. Please make sure to specify a secret in both client and
91 server blocks to avoid surprises.
94 - Debug printout issue.
98 - Don't disable OpenSSL session caching for 0.9.8p and newer in
100 - Detect OpenSSL version at runtime rather than at compile time.
104 - OpenSSL session caching is disabled when built against OpenSSL
105 older than 1.0.0b to mitigate possible effects of
106 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
107 - Crash bug when reading improper config file fixed.
110 Incompatible changes:
111 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
112 to keep the same behaviour as in previous versions of radsecproxy,
113 those who have LogLevel set to 4 need to change this to 5. Log
114 levels 1, 2 and 3 are unaffected.
116 New features and various improvements:
117 - LoopPrevention per server has been added.
118 - AddVendorAttribute rewrite configuration has been added.
119 - New log level, DBG_NOTICE, added.
120 - Diagnostics improved for errors resulting from failing syscalls.
121 - Removed all compiler warnings (compiling with -Wall).
124 - A UDP fragmentation issue.
125 - Build on Solaris when compiling with gcc.
126 - A bug in pwdencrypt() with passwords of a length greater than
130 Fixed header files for FreeBSD
131 Fix for multiple UDP servers on same IP address, solves accounting
135 Fixed some very minor bugs
136 Changed log levels for some messages, made loglevel 2 default
139 Client and Server blocks may contain multiple host options.
140 Configure (Makefile) options for specifying which transports
141 should be supported in a build.
144 Support for TCP and DTLS transports (type tcp, type dtls)
145 Listen... options can be specified multiple times
146 Dynamic server discovery
147 DuplicateInterval option in client block for specifying for how
148 long a request/reply shall be stored for duplicate detection
149 Support for RADIUS TTL (hopcount) attribute. Decrements value of
150 the TTL attribute if present, discards message if becomes 0.
151 If addTTL option is used, the TTL attribute is added with the
152 specified value if the forwarded message does not have one.
153 PolicyOID option can be used to require certain CA policies.
156 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
157 Old options deprecated but available for backwards compatiblity
158 Logging reply-message attribute from Reject messages
159 Contribution from Arne Schwabe
160 Rewrite blocks have new options addAttribute and modifyAttribute
161 rewriteIn (replacing rewrite) and rewriteOut in client and server
162 blocks for specifying rewrite on input/output. rewrite deprecated
163 but available as an alias for rewriteIn for backwards compatibility.
164 rewritein rewriteout rewrite
165 regular expressions in realms etc can now be more advanced, including
167 cacheExpiry option in tls blocks for specifying expiry time for the
168 cache of CA certificates and CRLs. This is particularly useful for
169 regularly updating CRLs.
170 Some logging has been made more informative
173 Logging stationid attribute
174 Added LoopPrevention option
175 Failover also without status-server
176 Options for RetryCount and RetryInterval
177 Working accounting and AccountingResponse option
178 CRL checking and option for enabling it
181 No longer looks for radsecproxy.conf in current directory
182 Rewrite block that allows removal of specified attributes
183 certificateNameCheck option for disabling CN/SubjectAltName check
184 matchCertificateAttribute now also supports CN matching
185 Forwarding of accounting messages, accountingServer option for realms
186 Supports multiple client blocks for same source address with different
188 Removed weekday from log timestamps
191 Pretend option for validating configuration
192 Include option for including additional config files
193 Allows clients configured by IP prefix, dynamic clients
194 Server failover support
195 Rewriting of username attribute
196 Source address and port can be specified for requests
199 Fixed crash when servers were configured after first realm block