3 - Threads are allocated with a 32 KB stack rather than what
4 happens to be the default. Patch by Fabian Mauchle.
5 - On systems with mallopt(3), freed memory is returned to the
6 system more aggressively. Patch by Fabian Mauchle.
9 - The duplication cache is purged properly. Patch by Fabian
14 - Fix the issue with verification of clients when using multiple
15 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
16 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
17 1.6.2). Reported by Raphael Geissert.
21 - When verifying clients, don't consider config blocks with CA
22 settings ('tls') which differ from the one used for verifying the
23 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
27 - Make naptr-eduroam.sh check NAPTR type case insensitively.
28 Fix from Adam Osuchowski.
32 - The default shared secret for TLS and DTLS connections change
33 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
34 section 2.3 (4). Please make sure to specify a secret in both
35 client and server blocks to avoid unwanted surprises.
37 - The default place to look for a configuration file has changed
38 from /etc to /usr/local/etc. Let radsecproxy know where your
39 configuration file can be found by using the `-c' command line
40 option. Or configure radsecproxy with --sysconfdir=/etc to
41 restore the old behaviour. (RADSECPROXY-31)
44 - Improved F-Ticks logging options. F-Ticks can now be sent to a
45 separate syslog facility and the VISINST label can now be
46 configured explicitly. This was implemented by Maja
47 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
48 - New config option PidFile. (RADSECPROXY-32)
49 - Preliminary support for DynamicLookupCommand added. It's for
50 TLS servers only at this point. Also, beware of risks for memory
51 leaks. In addition to this, for extra adventurous users, there's
52 a new configure option --enable-experimental-dyndisc which enables
53 even more new code for handling of dynamic discovery of TLS
55 - Address family (IPv4 or IPv6) can now be specified for clients
56 and servers. (RADSECPROXY-37)
59 - Stop the autoconfery from warning about defining variables
60 conditionally and unconditionally.
61 - Honour configure option --sysconfdir. (RADSECPROXY-31)
62 - Don't crash on failing DynamicLookupCommand scripts. Fix made
63 with help from Ralf Paffrath. (RADSECPROXY-33)
64 - When a DynamicLookupCommand script is failing, fall back to
65 other server(s) in the realm. The timeout depends on the kind of
67 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
71 - Support for F-Ticks logging.
72 - New binary radsecproxy-hash.
73 - A DynamicLookupCommand script can now signal "server not found"
74 by exiting with code 10. The scripts in the tools directory now
78 - catgconf renamed to radsecproxy-conf.
81 - All compiler warnings removed. Now compiling with -Werror.
85 - The default secret for TLS and DTLS will change in a future
86 release. Please make sure to specify a secret in both client and
87 server blocks to avoid surprises.
90 - Debug printout issue.
94 - Don't disable OpenSSL session caching for 0.9.8p and newer in
96 - Detect OpenSSL version at runtime rather than at compile time.
100 - OpenSSL session caching is disabled when built against OpenSSL
101 older than 1.0.0b to mitigate possible effects of
102 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
103 - Crash bug when reading improper config file fixed.
106 Incompatible changes:
107 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
108 to keep the same behaviour as in previous versions of radsecproxy,
109 those who have LogLevel set to 4 need to change this to 5. Log
110 levels 1, 2 and 3 are unaffected.
112 New features and various improvements:
113 - LoopPrevention per server has been added.
114 - AddVendorAttribute rewrite configuration has been added.
115 - New log level, DBG_NOTICE, added.
116 - Diagnostics improved for errors resulting from failing syscalls.
117 - Removed all compiler warnings (compiling with -Wall).
120 - A UDP fragmentation issue.
121 - Build on Solaris when compiling with gcc.
122 - A bug in pwdencrypt() with passwords of a length greater than
126 Fixed header files for FreeBSD
127 Fix for multiple UDP servers on same IP address, solves accounting
131 Fixed some very minor bugs
132 Changed log levels for some messages, made loglevel 2 default
135 Client and Server blocks may contain multiple host options.
136 Configure (Makefile) options for specifying which transports
137 should be supported in a build.
140 Support for TCP and DTLS transports (type tcp, type dtls)
141 Listen... options can be specified multiple times
142 Dynamic server discovery
143 DuplicateInterval option in client block for specifying for how
144 long a request/reply shall be stored for duplicate detection
145 Support for RADIUS TTL (hopcount) attribute. Decrements value of
146 the TTL attribute if present, discards message if becomes 0.
147 If addTTL option is used, the TTL attribute is added with the
148 specified value if the forwarded message does not have one.
149 PolicyOID option can be used to require certain CA policies.
152 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
153 Old options deprecated but available for backwards compatiblity
154 Logging reply-message attribute from Reject messages
155 Contribution from Arne Schwabe
156 Rewrite blocks have new options addAttribute and modifyAttribute
157 rewriteIn (replacing rewrite) and rewriteOut in client and server
158 blocks for specifying rewrite on input/output. rewrite deprecated
159 but available as an alias for rewriteIn for backwards compatibility.
160 rewritein rewriteout rewrite
161 regular expressions in realms etc can now be more advanced, including
163 cacheExpiry option in tls blocks for specifying expiry time for the
164 cache of CA certificates and CRLs. This is particularly useful for
165 regularly updating CRLs.
166 Some logging has been made more informative
169 Logging stationid attribute
170 Added LoopPrevention option
171 Failover also without status-server
172 Options for RetryCount and RetryInterval
173 Working accounting and AccountingResponse option
174 CRL checking and option for enabling it
177 No longer looks for radsecproxy.conf in current directory
178 Rewrite block that allows removal of specified attributes
179 certificateNameCheck option for disabling CN/SubjectAltName check
180 matchCertificateAttribute now also supports CN matching
181 Forwarding of accounting messages, accountingServer option for realms
182 Supports multiple client blocks for same source address with different
184 Removed weekday from log timestamps
187 Pretend option for validating configuration
188 Include option for including additional config files
189 Allows clients configured by IP prefix, dynamic clients
190 Server failover support
191 Rewriting of username attribute
192 Source address and port can be specified for requests
195 Fixed crash when servers were configured after first realm block