3 - Threads are allocated with a 32 KB stack rather than what
4 happens to be the default. Patch by Fabian Mauchle.
5 - On systems with mallopt(3), freed memory is returned to the
6 system more aggressively. Patch by Fabian Mauchle.
9 - radsecproxy-hash(1) no longer prints the hash four times.
10 Reported by Simon Lundström and jocar.
11 - Escaped slashes in regular expressions now works. Reported by
12 Duarte Fonseca. (RADSECPROXY-51)
13 - The duplication cache is purged properly. Patch by Fabian
15 - Stop freeing a shared piece of memory manifesting itself as a
16 crash when using dynamic discovery. Patch by Fabian Mauchle.
17 - Closing and freeing TLS clients properly. Patch by Fabian
19 - Timing out on TLS clients not closing the connection properly.
20 Patch by Fabian Mauchle.
24 - Fix the issue with verification of clients when using multiple
25 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
26 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
27 1.6.2). Reported by Raphael Geissert.
31 - When verifying clients, don't consider config blocks with CA
32 settings ('tls') which differ from the one used for verifying the
33 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
37 - Make naptr-eduroam.sh check NAPTR type case insensitively.
38 Fix from Adam Osuchowski.
42 - The default shared secret for TLS and DTLS connections change
43 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
44 section 2.3 (4). Please make sure to specify a secret in both
45 client and server blocks to avoid unwanted surprises.
47 - The default place to look for a configuration file has changed
48 from /etc to /usr/local/etc. Let radsecproxy know where your
49 configuration file can be found by using the `-c' command line
50 option. Or configure radsecproxy with --sysconfdir=/etc to
51 restore the old behaviour. (RADSECPROXY-31)
54 - Improved F-Ticks logging options. F-Ticks can now be sent to a
55 separate syslog facility and the VISINST label can now be
56 configured explicitly. This was implemented by Maja
57 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
58 - New config option PidFile. (RADSECPROXY-32)
59 - Preliminary support for DynamicLookupCommand added. It's for
60 TLS servers only at this point. Also, beware of risks for memory
61 leaks. In addition to this, for extra adventurous users, there's
62 a new configure option --enable-experimental-dyndisc which enables
63 even more new code for handling of dynamic discovery of TLS
65 - Address family (IPv4 or IPv6) can now be specified for clients
66 and servers. (RADSECPROXY-37)
69 - Stop the autoconfery from warning about defining variables
70 conditionally and unconditionally.
71 - Honour configure option --sysconfdir. (RADSECPROXY-31)
72 - Don't crash on failing DynamicLookupCommand scripts. Fix made
73 with help from Ralf Paffrath. (RADSECPROXY-33)
74 - When a DynamicLookupCommand script is failing, fall back to
75 other server(s) in the realm. The timeout depends on the kind of
77 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
81 - Support for F-Ticks logging.
82 - New binary radsecproxy-hash.
83 - A DynamicLookupCommand script can now signal "server not found"
84 by exiting with code 10. The scripts in the tools directory now
88 - catgconf renamed to radsecproxy-conf.
91 - All compiler warnings removed. Now compiling with -Werror.
95 - The default secret for TLS and DTLS will change in a future
96 release. Please make sure to specify a secret in both client and
97 server blocks to avoid surprises.
100 - Debug printout issue.
104 - Don't disable OpenSSL session caching for 0.9.8p and newer in
106 - Detect OpenSSL version at runtime rather than at compile time.
110 - OpenSSL session caching is disabled when built against OpenSSL
111 older than 1.0.0b to mitigate possible effects of
112 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
113 - Crash bug when reading improper config file fixed.
116 Incompatible changes:
117 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
118 to keep the same behaviour as in previous versions of radsecproxy,
119 those who have LogLevel set to 4 need to change this to 5. Log
120 levels 1, 2 and 3 are unaffected.
122 New features and various improvements:
123 - LoopPrevention per server has been added.
124 - AddVendorAttribute rewrite configuration has been added.
125 - New log level, DBG_NOTICE, added.
126 - Diagnostics improved for errors resulting from failing syscalls.
127 - Removed all compiler warnings (compiling with -Wall).
130 - A UDP fragmentation issue.
131 - Build on Solaris when compiling with gcc.
132 - A bug in pwdencrypt() with passwords of a length greater than
136 Fixed header files for FreeBSD
137 Fix for multiple UDP servers on same IP address, solves accounting
141 Fixed some very minor bugs
142 Changed log levels for some messages, made loglevel 2 default
145 Client and Server blocks may contain multiple host options.
146 Configure (Makefile) options for specifying which transports
147 should be supported in a build.
150 Support for TCP and DTLS transports (type tcp, type dtls)
151 Listen... options can be specified multiple times
152 Dynamic server discovery
153 DuplicateInterval option in client block for specifying for how
154 long a request/reply shall be stored for duplicate detection
155 Support for RADIUS TTL (hopcount) attribute. Decrements value of
156 the TTL attribute if present, discards message if becomes 0.
157 If addTTL option is used, the TTL attribute is added with the
158 specified value if the forwarded message does not have one.
159 PolicyOID option can be used to require certain CA policies.
162 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
163 Old options deprecated but available for backwards compatiblity
164 Logging reply-message attribute from Reject messages
165 Contribution from Arne Schwabe
166 Rewrite blocks have new options addAttribute and modifyAttribute
167 rewriteIn (replacing rewrite) and rewriteOut in client and server
168 blocks for specifying rewrite on input/output. rewrite deprecated
169 but available as an alias for rewriteIn for backwards compatibility.
170 rewritein rewriteout rewrite
171 regular expressions in realms etc can now be more advanced, including
173 cacheExpiry option in tls blocks for specifying expiry time for the
174 cache of CA certificates and CRLs. This is particularly useful for
175 regularly updating CRLs.
176 Some logging has been made more informative
179 Logging stationid attribute
180 Added LoopPrevention option
181 Failover also without status-server
182 Options for RetryCount and RetryInterval
183 Working accounting and AccountingResponse option
184 CRL checking and option for enabling it
187 No longer looks for radsecproxy.conf in current directory
188 Rewrite block that allows removal of specified attributes
189 certificateNameCheck option for disabling CN/SubjectAltName check
190 matchCertificateAttribute now also supports CN matching
191 Forwarding of accounting messages, accountingServer option for realms
192 Supports multiple client blocks for same source address with different
194 Removed weekday from log timestamps
197 Pretend option for validating configuration
198 Include option for including additional config files
199 Allows clients configured by IP prefix, dynamic clients
200 Server failover support
201 Rewriting of username attribute
202 Source address and port can be specified for requests
205 Fixed crash when servers were configured after first realm block