3 - Threads are allocated with a 32 KB stack rather than what
4 happens to be the default. Patch by Fabian Mauchle.
5 - On systems with mallopt(3), freed memory is returned to the
6 system more aggressively. Patch by Fabian Mauchle.
9 - The duplication cache is purged properly. Patch by Fabian
11 - Stop freeing a shared piece of memory manifesting itself as a
12 crash when using dynamic discovery. Patch by Fabian Mauchle.
16 - Fix the issue with verification of clients when using multiple
17 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
18 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
19 1.6.2). Reported by Raphael Geissert.
23 - When verifying clients, don't consider config blocks with CA
24 settings ('tls') which differ from the one used for verifying the
25 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
29 - Make naptr-eduroam.sh check NAPTR type case insensitively.
30 Fix from Adam Osuchowski.
34 - The default shared secret for TLS and DTLS connections change
35 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
36 section 2.3 (4). Please make sure to specify a secret in both
37 client and server blocks to avoid unwanted surprises.
39 - The default place to look for a configuration file has changed
40 from /etc to /usr/local/etc. Let radsecproxy know where your
41 configuration file can be found by using the `-c' command line
42 option. Or configure radsecproxy with --sysconfdir=/etc to
43 restore the old behaviour. (RADSECPROXY-31)
46 - Improved F-Ticks logging options. F-Ticks can now be sent to a
47 separate syslog facility and the VISINST label can now be
48 configured explicitly. This was implemented by Maja
49 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
50 - New config option PidFile. (RADSECPROXY-32)
51 - Preliminary support for DynamicLookupCommand added. It's for
52 TLS servers only at this point. Also, beware of risks for memory
53 leaks. In addition to this, for extra adventurous users, there's
54 a new configure option --enable-experimental-dyndisc which enables
55 even more new code for handling of dynamic discovery of TLS
57 - Address family (IPv4 or IPv6) can now be specified for clients
58 and servers. (RADSECPROXY-37)
61 - Stop the autoconfery from warning about defining variables
62 conditionally and unconditionally.
63 - Honour configure option --sysconfdir. (RADSECPROXY-31)
64 - Don't crash on failing DynamicLookupCommand scripts. Fix made
65 with help from Ralf Paffrath. (RADSECPROXY-33)
66 - When a DynamicLookupCommand script is failing, fall back to
67 other server(s) in the realm. The timeout depends on the kind of
69 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
73 - Support for F-Ticks logging.
74 - New binary radsecproxy-hash.
75 - A DynamicLookupCommand script can now signal "server not found"
76 by exiting with code 10. The scripts in the tools directory now
80 - catgconf renamed to radsecproxy-conf.
83 - All compiler warnings removed. Now compiling with -Werror.
87 - The default secret for TLS and DTLS will change in a future
88 release. Please make sure to specify a secret in both client and
89 server blocks to avoid surprises.
92 - Debug printout issue.
96 - Don't disable OpenSSL session caching for 0.9.8p and newer in
98 - Detect OpenSSL version at runtime rather than at compile time.
102 - OpenSSL session caching is disabled when built against OpenSSL
103 older than 1.0.0b to mitigate possible effects of
104 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
105 - Crash bug when reading improper config file fixed.
108 Incompatible changes:
109 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
110 to keep the same behaviour as in previous versions of radsecproxy,
111 those who have LogLevel set to 4 need to change this to 5. Log
112 levels 1, 2 and 3 are unaffected.
114 New features and various improvements:
115 - LoopPrevention per server has been added.
116 - AddVendorAttribute rewrite configuration has been added.
117 - New log level, DBG_NOTICE, added.
118 - Diagnostics improved for errors resulting from failing syscalls.
119 - Removed all compiler warnings (compiling with -Wall).
122 - A UDP fragmentation issue.
123 - Build on Solaris when compiling with gcc.
124 - A bug in pwdencrypt() with passwords of a length greater than
128 Fixed header files for FreeBSD
129 Fix for multiple UDP servers on same IP address, solves accounting
133 Fixed some very minor bugs
134 Changed log levels for some messages, made loglevel 2 default
137 Client and Server blocks may contain multiple host options.
138 Configure (Makefile) options for specifying which transports
139 should be supported in a build.
142 Support for TCP and DTLS transports (type tcp, type dtls)
143 Listen... options can be specified multiple times
144 Dynamic server discovery
145 DuplicateInterval option in client block for specifying for how
146 long a request/reply shall be stored for duplicate detection
147 Support for RADIUS TTL (hopcount) attribute. Decrements value of
148 the TTL attribute if present, discards message if becomes 0.
149 If addTTL option is used, the TTL attribute is added with the
150 specified value if the forwarded message does not have one.
151 PolicyOID option can be used to require certain CA policies.
154 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
155 Old options deprecated but available for backwards compatiblity
156 Logging reply-message attribute from Reject messages
157 Contribution from Arne Schwabe
158 Rewrite blocks have new options addAttribute and modifyAttribute
159 rewriteIn (replacing rewrite) and rewriteOut in client and server
160 blocks for specifying rewrite on input/output. rewrite deprecated
161 but available as an alias for rewriteIn for backwards compatibility.
162 rewritein rewriteout rewrite
163 regular expressions in realms etc can now be more advanced, including
165 cacheExpiry option in tls blocks for specifying expiry time for the
166 cache of CA certificates and CRLs. This is particularly useful for
167 regularly updating CRLs.
168 Some logging has been made more informative
171 Logging stationid attribute
172 Added LoopPrevention option
173 Failover also without status-server
174 Options for RetryCount and RetryInterval
175 Working accounting and AccountingResponse option
176 CRL checking and option for enabling it
179 No longer looks for radsecproxy.conf in current directory
180 Rewrite block that allows removal of specified attributes
181 certificateNameCheck option for disabling CN/SubjectAltName check
182 matchCertificateAttribute now also supports CN matching
183 Forwarding of accounting messages, accountingServer option for realms
184 Supports multiple client blocks for same source address with different
186 Removed weekday from log timestamps
189 Pretend option for validating configuration
190 Include option for including additional config files
191 Allows clients configured by IP prefix, dynamic clients
192 Server failover support
193 Rewriting of username attribute
194 Source address and port can be specified for requests
197 Fixed crash when servers were configured after first realm block