1 # Example hostapd build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
12 # Driver interface for Host AP driver
13 CONFIG_DRIVER_HOSTAP=y
15 # Driver interface for wired authenticator
16 #CONFIG_DRIVER_WIRED=y
18 # Driver interface for drivers using the nl80211 kernel interface
19 CONFIG_DRIVER_NL80211=y
21 # QCA vendor extensions to nl80211
22 #CONFIG_DRIVER_NL80211_QCA=y
24 # driver_nl80211.c requires libnl. If you are compiling it yourself
25 # you may need to point hostapd to your version of libnl.
27 #CFLAGS += -I$<path to libnl include files>
28 #LIBS += -L$<path to libnl library files>
30 # Use libnl v2.0 (or 3.0) libraries.
33 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
37 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
39 #CFLAGS += -I/usr/local/include
40 #LIBS += -L/usr/local/lib
41 #LIBS_p += -L/usr/local/lib
42 #LIBS_c += -L/usr/local/lib
44 # Driver interface for no driver (e.g., RADIUS server only)
50 # WPA2/IEEE 802.11i RSN pre-authentication
53 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
56 # IEEE 802.11w (management frame protection)
59 # Integrated EAP server
62 # EAP Re-authentication Protocol (ERP) in integrated EAP server
65 # EAP-MD5 for the integrated EAP server
68 # EAP-TLS for the integrated EAP server
71 # EAP-MSCHAPv2 for the integrated EAP server
74 # EAP-PEAP for the integrated EAP server
77 # EAP-GTC for the integrated EAP server
80 # EAP-TTLS for the integrated EAP server
83 # EAP-SIM for the integrated EAP server
86 # EAP-AKA for the integrated EAP server
89 # EAP-AKA' for the integrated EAP server
90 # This requires CONFIG_EAP_AKA to be enabled, too.
91 #CONFIG_EAP_AKA_PRIME=y
93 # EAP-PAX for the integrated EAP server
96 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
99 # EAP-pwd for the integrated EAP server (secure authentication with a password)
102 # EAP-SAKE for the integrated EAP server
105 # EAP-GPSK for the integrated EAP server
107 # Include support for optional SHA256 cipher suite in EAP-GPSK
108 #CONFIG_EAP_GPSK_SHA256=y
110 # EAP-FAST for the integrated EAP server
111 # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
112 # for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
113 # with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
116 # Wi-Fi Protected Setup (WPS)
118 # Enable UPnP support for external WPS Registrars
120 # Enable WPS support with NFC config method
126 # Trusted Network Connect (EAP-TNC)
129 # EAP-EKE for the integrated EAP server
132 # PKCS#12 (PFX) support (used to read private key and certificate file from
133 # a file that usually has extension .p12 or .pfx)
136 # RADIUS authentication server. This provides access to the integrated EAP
137 # server from external hosts using RADIUS.
138 #CONFIG_RADIUS_SERVER=y
140 # Build IPv6 support for RADIUS operations
143 # IEEE Std 802.11r-2008 (Fast BSS Transition)
146 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
147 # the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
148 #CONFIG_DRIVER_RADIUS_ACL=y
150 # IEEE 802.11n (High Throughput) support
153 # Wireless Network Management (IEEE Std 802.11v-2011)
154 # Note: This is experimental and not complete implementation.
157 # IEEE 802.11ac (Very High Throughput) support
158 #CONFIG_IEEE80211AC=y
160 # Remove debugging code that is printing out debug messages to stdout.
161 # This can be used to reduce the size of the hostapd considerably if debugging
162 # code is not needed.
163 #CONFIG_NO_STDOUT_DEBUG=y
165 # Add support for writing debug log to a file: -f /tmp/hostapd.log
166 # Disabled by default.
169 # Add support for sending all debug messages (regardless of debug verbosity)
170 # to the Linux kernel tracing facility. This helps debug the entire stack by
171 # making it easy to record everything happening from the driver up into the
172 # same file, e.g., using trace-cmd.
173 #CONFIG_DEBUG_LINUX_TRACING=y
175 # Remove support for RADIUS accounting
176 #CONFIG_NO_ACCOUNTING=y
178 # Remove support for RADIUS
181 # Remove support for VLANs
184 # Enable support for fully dynamic VLANs. This enables hostapd to
185 # automatically create bridge and VLAN interfaces if necessary.
186 #CONFIG_FULL_DYNAMIC_VLAN=y
188 # Use netlink-based kernel API for VLAN operations instead of ioctl()
189 # Note: This requires libnl 3.1 or newer.
190 #CONFIG_VLAN_NETLINK=y
192 # Remove support for dumping internal state through control interface commands
193 # This can be used to reduce binary size at the cost of disabling a debugging
195 #CONFIG_NO_DUMP_STATE=y
197 # Enable tracing code for developer debugging
198 # This tracks use of memory allocations and other registrations and reports
199 # incorrect use with a backtrace of call (or allocation) location.
201 # For BSD, comment out these.
203 #LIBS_p += -lexecinfo
204 #LIBS_c += -lexecinfo
206 # Use libbfd to get more details for developer debugging
207 # This enables use of libbfd to get more detailed symbols for the backtraces
208 # generated by CONFIG_WPA_TRACE=y.
209 #CONFIG_WPA_TRACE_BFD=y
210 # For BSD, comment out these.
211 #LIBS += -lbfd -liberty -lz
212 #LIBS_p += -lbfd -liberty -lz
213 #LIBS_c += -lbfd -liberty -lz
215 # hostapd depends on strong random number generation being available from the
216 # operating system. os_get_random() function is used to fetch random data when
217 # needed, e.g., for key generation. On Linux and BSD systems, this works by
218 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
219 # properly initialized before hostapd is started. This is important especially
220 # on embedded devices that do not have a hardware random number generator and
221 # may by default start up with minimal entropy available for random number
224 # As a safety net, hostapd is by default trying to internally collect
225 # additional entropy for generating random data to mix in with the data
226 # fetched from the OS. This by itself is not considered to be very strong, but
227 # it may help in cases where the system pool is not initialized properly.
228 # However, it is very strongly recommended that the system pool is initialized
229 # with enough entropy either by using hardware assisted random number
230 # generator or by storing state over device reboots.
232 # hostapd can be configured to maintain its own entropy store over restarts to
233 # enhance random number generation. This is not perfect, but it is much more
234 # secure than using the same sequence of random numbers after every reboot.
235 # This can be enabled with -e<entropy file> command line option. The specified
236 # file needs to be readable and writable by hostapd.
238 # If the os_get_random() is known to provide strong random data (e.g., on
239 # Linux/BSD, the board in question is known to have reliable source of random
240 # data from /dev/urandom), the internal hostapd random pool can be disabled.
241 # This will save some in binary size and CPU use. However, this should only be
242 # considered for builds that are known to be used on devices that meet the
243 # requirements described above.
244 #CONFIG_NO_RANDOM_POOL=y
246 # Should we use poll instead of select? Select is used by default.
249 # Should we use epoll instead of select? Select is used by default.
250 #CONFIG_ELOOP_EPOLL=y
252 # Select TLS implementation
253 # openssl = OpenSSL (default)
255 # internal = Internal TLSv1 implementation (experimental)
256 # none = Empty template
259 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
260 # can be enabled to get a stronger construction of messages when block ciphers
264 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
265 # can be enabled to enable use of stronger crypto algorithms.
268 # If CONFIG_TLS=internal is used, additional library and include paths are
269 # needed for LibTomMath. Alternatively, an integrated, minimal version of
270 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
271 # and drawbacks of this option.
272 #CONFIG_INTERNAL_LIBTOMMATH=y
273 #ifndef CONFIG_INTERNAL_LIBTOMMATH
274 #LTM_PATH=/usr/src/libtommath-0.39
275 #CFLAGS += -I$(LTM_PATH)
276 #LIBS += -L$(LTM_PATH)
277 #LIBS_p += -L$(LTM_PATH)
279 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
280 # can be configured to include faster routines for exptmod, sqr, and div to
281 # speed up DH and RSA calculation considerably
282 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
284 # Interworking (IEEE 802.11u)
285 # This can be used to enable functionality to improve interworking with
287 #CONFIG_INTERWORKING=y
292 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
295 # Enable Fast Session Transfer (FST)
298 # Enable CLI commands for FST testing
302 # This can be used to enable some testing options (see also the example
303 # configuration file) that are really useful only for testing clients that
304 # connect to this hostapd. These options allow, for example, to drop a
305 # certain percentage of probe requests or auth/(re)assoc frames.
307 #CONFIG_TESTING_OPTIONS=y
309 # Automatic Channel Selection
310 # This will allow hostapd to pick the channel automatically when channel is set
311 # to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
314 # Automatic selection is currently only done through initialization, later on
315 # we hope to do background checks to keep us moving to more ideal channels as
316 # time goes by. ACS is currently only supported through the nl80211 driver and
317 # your driver must have survey dump capability that is filled by the driver
320 # You can customize the ACS survey algorithm with the hostapd.conf variable
323 # Supported ACS drivers:
328 # For more details refer to:
329 # http://wireless.kernel.org/en/users/Documentation/acs