1 # Example hostapd build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
12 # Driver interface for Host AP driver
13 CONFIG_DRIVER_HOSTAP=y
15 # Driver interface for wired authenticator
16 #CONFIG_DRIVER_WIRED=y
18 # Driver interface for madwifi driver
19 #CONFIG_DRIVER_MADWIFI=y
20 #CFLAGS += -I../../madwifi # change to the madwifi source directory
22 # Driver interface for drivers using the nl80211 kernel interface
23 CONFIG_DRIVER_NL80211=y
25 # driver_nl80211.c requires libnl. If you are compiling it yourself
26 # you may need to point hostapd to your version of libnl.
28 #CFLAGS += -I$<path to libnl include files>
29 #LIBS += -L$<path to libnl library files>
31 # Use libnl v2.0 (or 3.0) libraries.
34 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
38 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
40 #CFLAGS += -I/usr/local/include
41 #LIBS += -L/usr/local/lib
42 #LIBS_p += -L/usr/local/lib
43 #LIBS_c += -L/usr/local/lib
45 # Driver interface for no driver (e.g., RADIUS server only)
51 # WPA2/IEEE 802.11i RSN pre-authentication
54 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
57 # IEEE 802.11w (management frame protection)
58 # This version is an experimental implementation based on IEEE 802.11w/D1.0
59 # draft and is subject to change since the standard has not yet been finalized.
60 # Driver support is also needed for IEEE 802.11w.
63 # Integrated EAP server
66 # EAP-MD5 for the integrated EAP server
69 # EAP-TLS for the integrated EAP server
72 # EAP-MSCHAPv2 for the integrated EAP server
75 # EAP-PEAP for the integrated EAP server
78 # EAP-GTC for the integrated EAP server
81 # EAP-TTLS for the integrated EAP server
84 # EAP-SIM for the integrated EAP server
87 # EAP-AKA for the integrated EAP server
90 # EAP-AKA' for the integrated EAP server
91 # This requires CONFIG_EAP_AKA to be enabled, too.
92 #CONFIG_EAP_AKA_PRIME=y
94 # EAP-PAX for the integrated EAP server
97 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
100 # EAP-pwd for the integrated EAP server (secure authentication with a password)
103 # EAP-SAKE for the integrated EAP server
106 # EAP-GPSK for the integrated EAP server
108 # Include support for optional SHA256 cipher suite in EAP-GPSK
109 #CONFIG_EAP_GPSK_SHA256=y
111 # EAP-FAST for the integrated EAP server
112 # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
113 # for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
114 # with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
117 # Wi-Fi Protected Setup (WPS)
119 # Enable WSC 2.0 support
121 # Enable UPnP support for external WPS Registrars
123 # Enable WPS support with NFC config method
129 # Trusted Network Connect (EAP-TNC)
132 # EAP-EKE for the integrated EAP server
135 # PKCS#12 (PFX) support (used to read private key and certificate file from
136 # a file that usually has extension .p12 or .pfx)
139 # RADIUS authentication server. This provides access to the integrated EAP
140 # server from external hosts using RADIUS.
141 #CONFIG_RADIUS_SERVER=y
143 # Build IPv6 support for RADIUS operations
146 # IEEE Std 802.11r-2008 (Fast BSS Transition)
149 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
150 # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
151 #CONFIG_DRIVER_RADIUS_ACL=y
153 # IEEE 802.11n (High Throughput) support
156 # Wireless Network Management (IEEE Std 802.11v-2011)
157 # Note: This is experimental and not complete implementation.
160 # IEEE 802.11ac (Very High Throughput) support
161 #CONFIG_IEEE80211AC=y
163 # Remove debugging code that is printing out debug messages to stdout.
164 # This can be used to reduce the size of the hostapd considerably if debugging
165 # code is not needed.
166 #CONFIG_NO_STDOUT_DEBUG=y
168 # Add support for writing debug log to a file: -f /tmp/hostapd.log
169 # Disabled by default.
172 # Add support for sending all debug messages (regardless of debug verbosity)
173 # to the Linux kernel tracing facility. This helps debug the entire stack by
174 # making it easy to record everything happening from the driver up into the
175 # same file, e.g., using trace-cmd.
176 #CONFIG_DEBUG_LINUX_TRACING=y
178 # Remove support for RADIUS accounting
179 #CONFIG_NO_ACCOUNTING=y
181 # Remove support for RADIUS
184 # Remove support for VLANs
187 # Enable support for fully dynamic VLANs. This enables hostapd to
188 # automatically create bridge and VLAN interfaces if necessary.
189 #CONFIG_FULL_DYNAMIC_VLAN=y
191 # Use netlink-based kernel API for VLAN operations instead of ioctl()
192 # Note: This requires libnl 3.1 or newer.
193 #CONFIG_VLAN_NETLINK=y
195 # Remove support for dumping internal state through control interface commands
196 # This can be used to reduce binary size at the cost of disabling a debugging
198 #CONFIG_NO_DUMP_STATE=y
200 # Enable tracing code for developer debugging
201 # This tracks use of memory allocations and other registrations and reports
202 # incorrect use with a backtrace of call (or allocation) location.
204 # For BSD, comment out these.
206 #LIBS_p += -lexecinfo
207 #LIBS_c += -lexecinfo
209 # Use libbfd to get more details for developer debugging
210 # This enables use of libbfd to get more detailed symbols for the backtraces
211 # generated by CONFIG_WPA_TRACE=y.
212 #CONFIG_WPA_TRACE_BFD=y
213 # For BSD, comment out these.
214 #LIBS += -lbfd -liberty -lz
215 #LIBS_p += -lbfd -liberty -lz
216 #LIBS_c += -lbfd -liberty -lz
218 # hostapd depends on strong random number generation being available from the
219 # operating system. os_get_random() function is used to fetch random data when
220 # needed, e.g., for key generation. On Linux and BSD systems, this works by
221 # reading /dev/urandom. It should be noted that the OS entropy pool needs to be
222 # properly initialized before hostapd is started. This is important especially
223 # on embedded devices that do not have a hardware random number generator and
224 # may by default start up with minimal entropy available for random number
227 # As a safety net, hostapd is by default trying to internally collect
228 # additional entropy for generating random data to mix in with the data
229 # fetched from the OS. This by itself is not considered to be very strong, but
230 # it may help in cases where the system pool is not initialized properly.
231 # However, it is very strongly recommended that the system pool is initialized
232 # with enough entropy either by using hardware assisted random number
233 # generator or by storing state over device reboots.
235 # hostapd can be configured to maintain its own entropy store over restarts to
236 # enhance random number generation. This is not perfect, but it is much more
237 # secure than using the same sequence of random numbers after every reboot.
238 # This can be enabled with -e<entropy file> command line option. The specified
239 # file needs to be readable and writable by hostapd.
241 # If the os_get_random() is known to provide strong random data (e.g., on
242 # Linux/BSD, the board in question is known to have reliable source of random
243 # data from /dev/urandom), the internal hostapd random pool can be disabled.
244 # This will save some in binary size and CPU use. However, this should only be
245 # considered for builds that are known to be used on devices that meet the
246 # requirements described above.
247 #CONFIG_NO_RANDOM_POOL=y
249 # Select TLS implementation
250 # openssl = OpenSSL (default)
252 # internal = Internal TLSv1 implementation (experimental)
253 # none = Empty template
256 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
257 # can be enabled to get a stronger construction of messages when block ciphers
261 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
262 # can be enabled to enable use of stronger crypto algorithms.
265 # If CONFIG_TLS=internal is used, additional library and include paths are
266 # needed for LibTomMath. Alternatively, an integrated, minimal version of
267 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
268 # and drawbacks of this option.
269 #CONFIG_INTERNAL_LIBTOMMATH=y
270 #ifndef CONFIG_INTERNAL_LIBTOMMATH
271 #LTM_PATH=/usr/src/libtommath-0.39
272 #CFLAGS += -I$(LTM_PATH)
273 #LIBS += -L$(LTM_PATH)
274 #LIBS_p += -L$(LTM_PATH)
276 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
277 # can be configured to include faster routines for exptmod, sqr, and div to
278 # speed up DH and RSA calculation considerably
279 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
281 # Interworking (IEEE 802.11u)
282 # This can be used to enable functionality to improve interworking with
284 #CONFIG_INTERWORKING=y
289 # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
293 # This can be used to enable some testing options (see also the example
294 # configuration file) that are really useful only for testing clients that
295 # connect to this hostapd. These options allow, for example, to drop a
296 # certain percentage of probe requests or auth/(re)assoc frames.
298 #CONFIG_TESTING_OPTIONS=y
300 # Automatic Channel Selection
301 # This will allow hostapd to pick the channel automatically when channel is set
302 # to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
305 # Automatic selection is currently only done through initialization, later on
306 # we hope to do background checks to keep us moving to more ideal channels as
307 # time goes by. ACS is currently only supported through the nl80211 driver and
308 # your driver must have survey dump capability that is filled by the driver
311 # You can customize the ACS survey algorithm with the hostapd.conf variable
314 # Supported ACS drivers:
319 # For more details refer to:
320 # http://wireless.kernel.org/en/users/Documentation/acs