libeap/src/common/qca-vendor.h

   1 /*
   2  * Qualcomm Atheros OUI and vendor specific assignments
   3  * Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
   4  *
   5  * This software may be distributed under the terms of the BSD license.
   6  * See README for more details.
   7  */
   8
   9 #ifndef QCA_VENDOR_H
  10 #define QCA_VENDOR_H
  11
  12 /*
  13  * This file is a registry of identifier assignments from the Qualcomm Atheros
  14  * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
  15  * can be assigned through normal review process for changes to the upstream
  16  * hostap.git repository.
  17  */
  18
  19 #define OUI_QCA 0x001374
  20
  21 /**
  22  * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
  23  */
  24 enum qca_radiotap_vendor_ids {
  25         QCA_RADIOTAP_VID_WLANTEST = 0,
  26 };
  27
  28 /**
  29  * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
  30  *
  31  * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
  32  *
  33  * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
  34  *
  35  * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
  36  *      internal BSS-selection. This command uses
  37  *      @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
  38  *      for the current connection (i.e., changes policy set by the nl80211
  39  *      Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
  40  *      included to indicate which BSS to use in case roaming is disabled.
  41  *
  42  * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
  43  *      ranges to avoid to reduce issues due to interference or internal
  44  *      co-existence information in the driver. The event data structure is
  45  *      defined in struct qca_avoid_freq_list.
  46  *
  47  * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
  48  *      for DFS offloading.
  49  *
  50  * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
  51  *      NAN Request/Response and NAN Indication messages. These messages are
  52  *      interpreted between the framework and the firmware component.
  53  *
  54  * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
  55  *      used to configure PMK to the driver even when not connected. This can
  56  *      be used to request offloading of key management operations. Only used
  57  *      if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
  58  *
  59  * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
  60  *      NL80211_CMD_ROAM event with optional attributes including information
  61  *      from offloaded key management operation. Uses
  62  *      enum qca_wlan_vendor_attr_roam_auth attributes. Only used
  63  *      if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
  64  *
  65  * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
  66  *      invoke the ACS function in device and pass selected channels to
  67  *      hostapd.
  68  *
  69  * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
  70  *      supported by the driver. enum qca_wlan_vendor_features defines
  71  *      the possible features.
  72  *
  73  * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
  74  *      which supports DFS offloading, to indicate a channel availability check
  75  *      start.
  76  *
  77  * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
  78  *      which supports DFS offloading, to indicate a channel availability check
  79  *      completion.
  80  *
  81  * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
  82  *      which supports DFS offloading, to indicate that the channel availability
  83  *      check aborted, no change to the channel status.
  84  *
  85  * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
  86  *      driver, which supports DFS offloading, to indicate that the
  87  *      Non-Occupancy Period for this channel is over, channel becomes usable.
  88  *
  89  * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
  90  *      which supports DFS offloading, to indicate a radar pattern has been
  91  *      detected. The channel is now unusable.
  92  */
  93 enum qca_nl80211_vendor_subcmds {
  94         QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
  95         QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
  96         /* subcmds 2..8 not yet allocated */
  97         QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
  98         QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
  99         QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY =  11,
 100         QCA_NL80211_VENDOR_SUBCMD_NAN =  12,
 101         QCA_NL80211_VENDOR_SUBMCD_STATS_EXT = 13,
 102         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
 103         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
 104         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
 105         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
 106         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
 107         QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
 108         QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
 109         QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
 110         QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
 111         QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
 112         QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
 113         QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
 114         QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
 115         QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
 116         QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
 117         QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
 118         QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
 119         QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
 120         QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
 121         QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
 122         QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
 123         QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
 124         QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
 125         QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
 126         QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
 127         QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
 128         QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
 129         QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
 130         QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
 131         /* 43..49 - reserved for QCA */
 132         QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
 133         QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
 134         QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
 135         /* 53 - reserved - was used by QCA, but not in use anymore */
 136         QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
 137         QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
 138         QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
 139         QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
 140         QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
 141         QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
 142         QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
 143         /* 61-90 - reserved for QCA */
 144         QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
 145         QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
 146         QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
 147         QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
 148         QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
 149         QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
 150         QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
 151         QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
 152         QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
 153         QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
 154         QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
 155         QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
 156         QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
 157         QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
 158         QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
 159 };
 160
 161
 162 enum qca_wlan_vendor_attr {
 163         QCA_WLAN_VENDOR_ATTR_INVALID = 0,
 164         /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
 165         QCA_WLAN_VENDOR_ATTR_DFS     = 1,
 166         /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */
 167         QCA_WLAN_VENDOR_ATTR_NAN     = 2,
 168         /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
 169         QCA_WLAN_VENDOR_ATTR_STATS_EXT     = 3,
 170         /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
 171         QCA_WLAN_VENDOR_ATTR_IFINDEX     = 4,
 172         /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
 173          * by enum qca_roaming_policy. */
 174         QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
 175         QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
 176         /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
 177         QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
 178         QCA_WLAN_VENDOR_ATTR_TEST = 8,
 179         /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
 180         /* Unsigned 32-bit value. */
 181         QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
 182         /* Unsigned 32-bit value */
 183         QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
 184         /* Unsigned 32-bit value */
 185         QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
 186         /* Unsigned 32-bit value from enum qca_set_band. */
 187         QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
 188         /* keep last */
 189         QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
 190         QCA_WLAN_VENDOR_ATTR_MAX        = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
 191 };
 192
 193
 194 enum qca_roaming_policy {
 195         QCA_ROAMING_NOT_ALLOWED,
 196         QCA_ROAMING_ALLOWED_WITHIN_ESS,
 197 };
 198
 199 enum qca_wlan_vendor_attr_roam_auth {
 200         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
 201         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
 202         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
 203         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
 204         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
 205         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
 206         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
 207         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
 208         /* keep last */
 209         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
 210         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
 211         QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
 212 };
 213
 214 enum qca_wlan_vendor_attr_acs_offload {
 215         QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
 216         QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
 217         QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
 218         QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
 219         QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
 220         QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
 221         QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
 222         QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
 223         QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
 224         QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
 225         QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
 226         QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
 227         /* keep last */
 228         QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
 229         QCA_WLAN_VENDOR_ATTR_ACS_MAX =
 230         QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
 231 };
 232
 233 enum qca_wlan_vendor_acs_hw_mode {
 234         QCA_ACS_MODE_IEEE80211B,
 235         QCA_ACS_MODE_IEEE80211G,
 236         QCA_ACS_MODE_IEEE80211A,
 237         QCA_ACS_MODE_IEEE80211AD,
 238         QCA_ACS_MODE_IEEE80211ANY,
 239 };
 240
 241 /**
 242  * enum qca_wlan_vendor_features - Vendor device/driver feature flags
 243  *
 244  * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
 245  *      management offload, a mechanism where the station's firmware
 246  *      does the exchange with the AP to establish the temporal keys
 247  *      after roaming, rather than having the user space wpa_supplicant do it.
 248  * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
 249  *      band selection based on channel selection results.
 250  * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
 251  */
 252 enum qca_wlan_vendor_features {
 253         QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD        = 0,
 254         QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY     = 1,
 255         NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
 256 };
 257
 258 /**
 259  * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
 260  *
 261  * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
 262  *      the offloaded data.
 263  * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
 264  *      data.
 265  * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
 266  *      indication.
 267  */
 268 enum qca_wlan_vendor_attr_data_offload_ind {
 269         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
 270         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
 271         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
 272         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
 273
 274         /* keep last */
 275         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
 276         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
 277         QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
 278 };
 279
 280 enum qca_vendor_attr_get_preferred_freq_list {
 281         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
 282         /* A 32-unsigned value; the interface type/mode for which the preferred
 283          * frequency list is requested (see enum qca_iface_type for possible
 284          * values); used in GET_PREFERRED_FREQ_LIST command from user-space to
 285          * kernel and in the kernel response back to user-space.
 286          */
 287         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
 288         /* An array of 32-unsigned values; values are frequency (MHz); sent
 289          * from kernel space to user space.
 290          */
 291         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
 292         /* keep last */
 293         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
 294         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
 295         QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
 296 };
 297
 298 enum qca_vendor_attr_probable_oper_channel {
 299         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
 300         /* 32-bit unsigned value; indicates the connection/iface type likely to
 301          * come on this channel (see enum qca_iface_type).
 302          */
 303         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
 304         /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
 305         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
 306         /* keep last */
 307         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
 308         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
 309         QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
 310 };
 311
 312 enum qca_iface_type {
 313         QCA_IFACE_TYPE_STA,
 314         QCA_IFACE_TYPE_AP,
 315         QCA_IFACE_TYPE_P2P_CLIENT,
 316         QCA_IFACE_TYPE_P2P_GO,
 317         QCA_IFACE_TYPE_IBSS,
 318         QCA_IFACE_TYPE_TDLS,
 319 };
 320
 321 enum qca_set_band {
 322         QCA_SETBAND_AUTO,
 323         QCA_SETBAND_5G,
 324         QCA_SETBAND_2G,
 325 };
 326
 327 /* IEEE 802.11 Vendor Specific elements */
 328
 329 /**
 330  * enum qca_vendor_element_id - QCA Vendor Specific element types
 331  *
 332  * These values are used to identify QCA Vendor Specific elements. The
 333  * payload of the element starts with the three octet OUI (OUI_QCA) and
 334  * is followed by a single octet type which is defined by this enum.
 335  *
 336  * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
 337  *      This element can be used to specify preference order for supported
 338  *      channels. The channels in this list are in preference order (the first
 339  *      one has the highest preference) and are described as a pair of
 340  *      (global) Operating Class and Channel Number (each one octet) fields.
 341  *
 342  *      This extends the standard P2P functionality by providing option to have
 343  *      more than one preferred operating channel. When this element is present,
 344  *      it replaces the preference indicated in the Operating Channel attribute.
 345  *      For supporting other implementations, the Operating Channel attribute is
 346  *      expected to be used with the highest preference channel. Similarly, all
 347  *      the channels included in this Preferred channel list element are
 348  *      expected to be included in the Channel List attribute.
 349  *
 350  *      This vendor element may be included in GO Negotiation Request, P2P
 351  *      Invitation Request, and Provision Discovery Request frames.
 352  */
 353 enum qca_vendor_element_id {
 354         QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
 355 };
 356
 357 #endif /* QCA_VENDOR_H */