Updated through tag hostap_2_5 from git://w1.fi/hostap.git

[mech_eap.git] / libeap / wpa_supplicant / config.h

/*
 * WPA Supplicant / Configuration file structures
 * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
 *
 * This software may be distributed under the terms of the BSD license.
 * See README for more details.
 */

#ifndef CONFIG_H
#define CONFIG_H

#define DEFAULT_EAPOL_VERSION 1
#ifdef CONFIG_NO_SCAN_PROCESSING
#define DEFAULT_AP_SCAN 2
#else /* CONFIG_NO_SCAN_PROCESSING */
#define DEFAULT_AP_SCAN 1
#endif /* CONFIG_NO_SCAN_PROCESSING */
#define DEFAULT_USER_MPM 1
#define DEFAULT_MAX_PEER_LINKS 99
#define DEFAULT_MESH_MAX_INACTIVITY 300
/*
 * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
 * but use 1000 ms in practice to avoid issues on low power CPUs.
 */
#define DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD 1000
#define DEFAULT_FAST_REAUTH 1
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
#define DEFAULT_P2P_GO_MAX_INACTIVITY (5 * 60)
#define DEFAULT_P2P_OPTIMIZE_LISTEN_CHAN 0
#define DEFAULT_BSS_MAX_COUNT 200
#define DEFAULT_BSS_EXPIRATION_AGE 180
#define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2
#define DEFAULT_MAX_NUM_STA 128
#define DEFAULT_ACCESS_NETWORK_TYPE 15
#define DEFAULT_SCAN_CUR_FREQ 0
#define DEFAULT_P2P_SEARCH_DELAY 500
#define DEFAULT_RAND_ADDR_LIFETIME 60
#define DEFAULT_KEY_MGMT_OFFLOAD 1
#define DEFAULT_CERT_IN_CB 1
#define DEFAULT_P2P_GO_CTWINDOW 0

#include "config_ssid.h"
#include "wps/wps.h"
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"


struct wpa_cred {
        /**
         * next - Next credential in the list
         *
         * This pointer can be used to iterate over all credentials. The head
         * of this list is stored in the cred field of struct wpa_config.
         */
        struct wpa_cred *next;

        /**
         * id - Unique id for the credential
         *
         * This identifier is used as a unique identifier for each credential
         * block when using the control interface. Each credential is allocated
         * an id when it is being created, either when reading the
         * configuration file or when a new credential is added through the
         * control interface.
         */
        int id;

        /**
         * temporary - Whether this credential is temporary and not to be saved
         */
        int temporary;

        /**
         * priority - Priority group
         *
         * By default, all networks and credentials get the same priority group
         * (0). This field can be used to give higher priority for credentials
         * (and similarly in struct wpa_ssid for network blocks) to change the
         * Interworking automatic networking selection behavior. The matching
         * network (based on either an enabled network block or a credential)
         * with the highest priority value will be selected.
         */
        int priority;

        /**
         * pcsc - Use PC/SC and SIM/USIM card
         */
        int pcsc;

        /**
         * realm - Home Realm for Interworking
         */
        char *realm;

        /**
         * username - Username for Interworking network selection
         */
        char *username;

        /**
         * password - Password for Interworking network selection
         */
        char *password;

        /**
         * ext_password - Whether password is a name for external storage
         */
        int ext_password;

        /**
         * ca_cert - CA certificate for Interworking network selection
         */
        char *ca_cert;

        /**
         * client_cert - File path to client certificate file (PEM/DER)
         *
         * This field is used with Interworking networking selection for a case
         * where client certificate/private key is used for authentication
         * (EAP-TLS). Full path to the file should be used since working
         * directory may change when wpa_supplicant is run in the background.
         *
         * Alternatively, a named configuration blob can be used by setting
         * this to blob://blob_name.
         */
        char *client_cert;

        /**
         * private_key - File path to client private key file (PEM/DER/PFX)
         *
         * When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
         * commented out. Both the private key and certificate will be read
         * from the PKCS#12 file in this case. Full path to the file should be
         * used since working directory may change when wpa_supplicant is run
         * in the background.
         *
         * Windows certificate store can be used by leaving client_cert out and
         * configuring private_key in one of the following formats:
         *
         * cert://substring_to_match
         *
         * hash://certificate_thumbprint_in_hex
         *
         * For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
         *
         * Note that when running wpa_supplicant as an application, the user
         * certificate store (My user account) is used, whereas computer store
         * (Computer account) is used when running wpasvc as a service.
         *
         * Alternatively, a named configuration blob can be used by setting
         * this to blob://blob_name.
         */
        char *private_key;

        /**
         * private_key_passwd - Password for private key file
         */
        char *private_key_passwd;

        /**
         * imsi - IMSI in <MCC> | <MNC> | '-' | <MSIN> format
         */
        char *imsi;

        /**
         * milenage - Milenage parameters for SIM/USIM simulator in
         *      <Ki>:<OPc>:<SQN> format
         */
        char *milenage;

        /**
         * domain_suffix_match - Constraint for server domain name
         *
         * If set, this FQDN is used as a suffix match requirement for the AAA
         * server certificate in SubjectAltName dNSName element(s). If a
         * matching dNSName is found, this constraint is met. If no dNSName
         * values are present, this constraint is matched against SubjectName CN
         * using same suffix match comparison. Suffix match here means that the
         * host/domain name is compared one label at a time starting from the
         * top-level domain and all the labels in @domain_suffix_match shall be
         * included in the certificate. The certificate may include additional
         * sub-level labels in addition to the required labels.
         *
         * For example, domain_suffix_match=example.com would match
         * test.example.com but would not match test-example.com.
         */
        char *domain_suffix_match;

        /**
         * domain - Home service provider FQDN(s)
         *
         * This is used to compare against the Domain Name List to figure out
         * whether the AP is operated by the Home SP. Multiple domain entries
         * can be used to configure alternative FQDNs that will be considered
         * home networks.
         */
        char **domain;

        /**
         * num_domain - Number of FQDNs in the domain array
         */
        size_t num_domain;

        /**
         * roaming_consortium - Roaming Consortium OI
         *
         * If roaming_consortium_len is non-zero, this field contains the
         * Roaming Consortium OI that can be used to determine which access
         * points support authentication with this credential. This is an
         * alternative to the use of the realm parameter. When using Roaming
         * Consortium to match the network, the EAP parameters need to be
         * pre-configured with the credential since the NAI Realm information
         * may not be available or fetched.
         */
        u8 roaming_consortium[15];

        /**
         * roaming_consortium_len - Length of roaming_consortium
         */
        size_t roaming_consortium_len;

        u8 required_roaming_consortium[15];
        size_t required_roaming_consortium_len;

        /**
         * eap_method - EAP method to use
         *
         * Pre-configured EAP method to use with this credential or %NULL to
         * indicate no EAP method is selected, i.e., the method will be
         * selected automatically based on ANQP information.
         */
        struct eap_method_type *eap_method;

        /**
         * phase1 - Phase 1 (outer authentication) parameters
         *
         * Pre-configured EAP parameters or %NULL.
         */
        char *phase1;

        /**
         * phase2 - Phase 2 (inner authentication) parameters
         *
         * Pre-configured EAP parameters or %NULL.
         */
        char *phase2;

        struct excluded_ssid {
                u8 ssid[SSID_MAX_LEN];
                size_t ssid_len;
        } *excluded_ssid;
        size_t num_excluded_ssid;

        struct roaming_partner {
                char fqdn[128];
                int exact_match;
                u8 priority;
                char country[3];
        } *roaming_partner;
        size_t num_roaming_partner;

        int update_identifier;

        /**
         * provisioning_sp - FQDN of the SP that provisioned the credential
         */
        char *provisioning_sp;

        /**
         * sp_priority - Credential priority within a provisioning SP
         *
         * This is the priority of the credential among all credentials
         * provisionined by the same SP (i.e., for entries that have identical
         * provisioning_sp value). The range of this priority is 0-255 with 0
         * being the highest and 255 the lower priority.
         */
        int sp_priority;

        unsigned int min_dl_bandwidth_home;
        unsigned int min_ul_bandwidth_home;
        unsigned int min_dl_bandwidth_roaming;
        unsigned int min_ul_bandwidth_roaming;

        /**
         * max_bss_load - Maximum BSS Load Channel Utilization (1..255)
         * This value is used as the maximum channel utilization for network
         * selection purposes for home networks. If the AP does not advertise
         * BSS Load or if the limit would prevent any connection, this
         * constraint will be ignored.
         */
        unsigned int max_bss_load;

        unsigned int num_req_conn_capab;
        u8 *req_conn_capab_proto;
        int **req_conn_capab_port;

        /**
         * ocsp - Whether to use/require OCSP to check server certificate
         *
         * 0 = do not use OCSP stapling (TLS certificate status extension)
         * 1 = try to use OCSP stapling, but not require response
         * 2 = require valid OCSP stapling response
         */
        int ocsp;

        /**
         * sim_num - User selected SIM identifier
         *
         * This variable is used for identifying which SIM is used if the system
         * has more than one.
         */
        int sim_num;
};


#define CFG_CHANGED_DEVICE_NAME BIT(0)
#define CFG_CHANGED_CONFIG_METHODS BIT(1)
#define CFG_CHANGED_DEVICE_TYPE BIT(2)
#define CFG_CHANGED_OS_VERSION BIT(3)
#define CFG_CHANGED_UUID BIT(4)
#define CFG_CHANGED_COUNTRY BIT(5)
#define CFG_CHANGED_SEC_DEVICE_TYPE BIT(6)
#define CFG_CHANGED_P2P_SSID_POSTFIX BIT(7)
#define CFG_CHANGED_WPS_STRING BIT(8)
#define CFG_CHANGED_P2P_INTRA_BSS BIT(9)
#define CFG_CHANGED_VENDOR_EXTENSION BIT(10)
#define CFG_CHANGED_P2P_LISTEN_CHANNEL BIT(11)
#define CFG_CHANGED_P2P_OPER_CHANNEL BIT(12)
#define CFG_CHANGED_P2P_PREF_CHAN BIT(13)
#define CFG_CHANGED_EXT_PW_BACKEND BIT(14)
#define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15)
#define CFG_CHANGED_P2P_PASSPHRASE_LEN BIT(16)

/**
 * struct wpa_config - wpa_supplicant configuration data
 *
 * This data structure is presents the per-interface (radio) configuration
 * data. In many cases, there is only one struct wpa_config instance, but if
 * more than one network interface is being controlled, one instance is used
 * for each.
 */
struct wpa_config {
        /**
         * ssid - Head of the global network list
         *
         * This is the head for the list of all the configured networks.
         */
        struct wpa_ssid *ssid;

        /**
         * pssid - Per-priority network lists (in priority order)
         */
        struct wpa_ssid **pssid;

        /**
         * num_prio - Number of different priorities used in the pssid lists
         *
         * This indicates how many per-priority network lists are included in
         * pssid.
         */
        int num_prio;

        /**
         * cred - Head of the credential list
         *
         * This is the head for the list of all the configured credentials.
         */
        struct wpa_cred *cred;

        /**
         * eapol_version - IEEE 802.1X/EAPOL version number
         *
         * wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which
         * defines EAPOL version 2. However, there are many APs that do not
         * handle the new version number correctly (they seem to drop the
         * frames completely). In order to make wpa_supplicant interoperate
         * with these APs, the version number is set to 1 by default. This
         * configuration value can be used to set it to the new version (2).
         */
        int eapol_version;

        /**
         * ap_scan - AP scanning/selection
         *
         * By default, wpa_supplicant requests driver to perform AP
         * scanning and then uses the scan results to select a
         * suitable AP. Another alternative is to allow the driver to
         * take care of AP scanning and selection and use
         * wpa_supplicant just to process EAPOL frames based on IEEE
         * 802.11 association information from the driver.
         *
         * 1: wpa_supplicant initiates scanning and AP selection (default).
         *
         * 0: Driver takes care of scanning, AP selection, and IEEE 802.11
         * association parameters (e.g., WPA IE generation); this mode can
         * also be used with non-WPA drivers when using IEEE 802.1X mode;
         * do not try to associate with APs (i.e., external program needs
         * to control association). This mode must also be used when using
         * wired Ethernet drivers.
         *
         * 2: like 0, but associate with APs using security policy and SSID
         * (but not BSSID); this can be used, e.g., with ndiswrapper and NDIS
         * drivers to enable operation with hidden SSIDs and optimized roaming;
         * in this mode, the network blocks in the configuration are tried
         * one by one until the driver reports successful association; each
         * network block should have explicit security policy (i.e., only one
         * option in the lists) for key_mgmt, pairwise, group, proto variables.
         *
         * Note: ap_scan=2 should not be used with the nl80211 driver interface
         * (the current Linux interface). ap_scan=1 is optimized work working
         * with nl80211. For finding networks using hidden SSID, scan_ssid=1 in
         * the network block can be used with nl80211.
         */
        int ap_scan;

        /**
         * bgscan - Background scan and roaming parameters or %NULL if none
         *
         * This is an optional set of parameters for background scanning and
         * roaming within a network (ESS). For more detailed information see
         * ssid block documentation.
         *
         * The variable defines default bgscan behavior for all BSS station
         * networks except for those which have their own bgscan configuration.
         */
         char *bgscan;

        /**
         * disable_scan_offload - Disable automatic offloading of scan requests
         *
         * By default, %wpa_supplicant tries to offload scanning if the driver
         * indicates support for this (sched_scan). This configuration
         * parameter can be used to disable this offloading mechanism.
         */
        int disable_scan_offload;

        /**
         * ctrl_interface - Parameters for the control interface
         *
         * If this is specified, %wpa_supplicant will open a control interface
         * that is available for external programs to manage %wpa_supplicant.
         * The meaning of this string depends on which control interface
         * mechanism is used. For all cases, the existence of this parameter
         * in configuration is used to determine whether the control interface
         * is enabled.
         *
         * For UNIX domain sockets (default on Linux and BSD): This is a
         * directory that will be created for UNIX domain sockets for listening
         * to requests from external programs (CLI/GUI, etc.) for status
         * information and configuration. The socket file will be named based
         * on the interface name, so multiple %wpa_supplicant processes can be
         * run at the same time if more than one interface is used.
         * /var/run/wpa_supplicant is the recommended directory for sockets and
         * by default, wpa_cli will use it when trying to connect with
         * %wpa_supplicant.
         *
         * Access control for the control interface can be configured
         * by setting the directory to allow only members of a group
         * to use sockets. This way, it is possible to run
         * %wpa_supplicant as root (since it needs to change network
         * configuration and open raw sockets) and still allow GUI/CLI
         * components to be run as non-root users. However, since the
         * control interface can be used to change the network
         * configuration, this access needs to be protected in many
         * cases. By default, %wpa_supplicant is configured to use gid
         * 0 (root). If you want to allow non-root users to use the
         * control interface, add a new group and change this value to
         * match with that group. Add users that should have control
         * interface access to this group.
         *
         * When configuring both the directory and group, use following format:
         * DIR=/var/run/wpa_supplicant GROUP=wheel
         * DIR=/var/run/wpa_supplicant GROUP=0
         * (group can be either group name or gid)
         *
         * For UDP connections (default on Windows): The value will be ignored.
         * This variable is just used to select that the control interface is
         * to be created. The value can be set to, e.g., udp
         * (ctrl_interface=udp).
         *
         * For Windows Named Pipe: This value can be used to set the security
         * descriptor for controlling access to the control interface. Security
         * descriptor can be set using Security Descriptor String Format (see
         * http://msdn.microsoft.com/library/default.asp?url=/library/en-us/secauthz/security/security_descriptor_string_format.asp).
         * The descriptor string needs to be prefixed with SDDL=. For example,
         * ctrl_interface=SDDL=D: would set an empty DACL (which will reject
         * all connections).
         */
        char *ctrl_interface;

        /**
         * ctrl_interface_group - Control interface group (DEPRECATED)
         *
         * This variable is only used for backwards compatibility. Group for
         * UNIX domain sockets should now be specified using GROUP=group in
         * ctrl_interface variable.
         */
        char *ctrl_interface_group;

        /**
         * fast_reauth - EAP fast re-authentication (session resumption)
         *
         * By default, fast re-authentication is enabled for all EAP methods
         * that support it. This variable can be used to disable fast
         * re-authentication (by setting fast_reauth=0). Normally, there is no
         * need to disable fast re-authentication.
         */
        int fast_reauth;

        /**
         * opensc_engine_path - Path to the OpenSSL engine for opensc
         *
         * This is an OpenSSL specific configuration option for loading OpenSC
         * engine (engine_opensc.so); if %NULL, this engine is not loaded.
         */
        char *opensc_engine_path;

        /**
         * pkcs11_engine_path - Path to the OpenSSL engine for PKCS#11
         *
         * This is an OpenSSL specific configuration option for loading PKCS#11
         * engine (engine_pkcs11.so); if %NULL, this engine is not loaded.
         */
        char *pkcs11_engine_path;

        /**
         * pkcs11_module_path - Path to the OpenSSL OpenSC/PKCS#11 module
         *
         * This is an OpenSSL specific configuration option for configuring
         * path to OpenSC/PKCS#11 engine (opensc-pkcs11.so); if %NULL, this
         * module is not loaded.
         */
        char *pkcs11_module_path;

        /**
         * openssl_ciphers - OpenSSL cipher string
         *
         * This is an OpenSSL specific configuration option for configuring the
         * default ciphers. If not set, "DEFAULT:!EXP:!LOW" is used as the
         * default.
         */
        char *openssl_ciphers;

        /**
         * pcsc_reader - PC/SC reader name prefix
         *
         * If not %NULL, PC/SC reader with a name that matches this prefix is
         * initialized for SIM/USIM access. Empty string can be used to match
         * the first available reader.
         */
        char *pcsc_reader;

        /**
         * pcsc_pin - PIN for USIM, GSM SIM, and smartcards
         *
         * This field is used to configure PIN for SIM/USIM for EAP-SIM and
         * EAP-AKA. If left out, this will be asked through control interface.
         */
        char *pcsc_pin;

        /**
         * external_sim - Use external processing for SIM/USIM operations
         */
        int external_sim;

        /**
         * driver_param - Driver interface parameters
         *
         * This text string is passed to the selected driver interface with the
         * optional struct wpa_driver_ops::set_param() handler. This can be
         * used to configure driver specific options without having to add new
         * driver interface functionality.
         */
        char *driver_param;

        /**
         * dot11RSNAConfigPMKLifetime - Maximum lifetime of a PMK
         *
         * dot11 MIB variable for the maximum lifetime of a PMK in the PMK
         * cache (unit: seconds).
         */
        unsigned int dot11RSNAConfigPMKLifetime;

        /**
         * dot11RSNAConfigPMKReauthThreshold - PMK re-authentication threshold
         *
         * dot11 MIB variable for the percentage of the PMK lifetime
         * that should expire before an IEEE 802.1X reauthentication occurs.
         */
        unsigned int dot11RSNAConfigPMKReauthThreshold;

        /**
         * dot11RSNAConfigSATimeout - Security association timeout
         *
         * dot11 MIB variable for the maximum time a security association
         * shall take to set up (unit: seconds).
         */
        unsigned int dot11RSNAConfigSATimeout;

        /**
         * update_config - Is wpa_supplicant allowed to update configuration
         *
         * This variable control whether wpa_supplicant is allow to re-write
         * its configuration with wpa_config_write(). If this is zero,
         * configuration data is only changed in memory and the external data
         * is not overriden. If this is non-zero, wpa_supplicant will update
         * the configuration data (e.g., a file) whenever configuration is
         * changed. This update may replace the old configuration which can
         * remove comments from it in case of a text file configuration.
         */
        int update_config;

        /**
         * blobs - Configuration blobs
         */
        struct wpa_config_blob *blobs;

        /**
         * uuid - Universally Unique IDentifier (UUID; see RFC 4122) for WPS
         */
        u8 uuid[16];

        /**
         * device_name - Device Name (WPS)
         * User-friendly description of device; up to 32 octets encoded in
         * UTF-8
         */
        char *device_name;

        /**
         * manufacturer - Manufacturer (WPS)
         * The manufacturer of the device (up to 64 ASCII characters)
         */
        char *manufacturer;

        /**
         * model_name - Model Name (WPS)
         * Model of the device (up to 32 ASCII characters)
         */
        char *model_name;

        /**
         * model_number - Model Number (WPS)
         * Additional device description (up to 32 ASCII characters)
         */
        char *model_number;

        /**
         * serial_number - Serial Number (WPS)
         * Serial number of the device (up to 32 characters)
         */
        char *serial_number;

        /**
         * device_type - Primary Device Type (WPS)
         */
        u8 device_type[WPS_DEV_TYPE_LEN];

        /**
         * config_methods - Config Methods
         *
         * This is a space-separated list of supported WPS configuration
         * methods. For example, "label virtual_display virtual_push_button
         * keypad".
         * Available methods: usba ethernet label display ext_nfc_token
         * int_nfc_token nfc_interface push_button keypad
         * virtual_display physical_display
         * virtual_push_button physical_push_button.
         */
        char *config_methods;

        /**
         * os_version - OS Version (WPS)
         * 4-octet operating system version number
         */
        u8 os_version[4];

        /**
         * country - Country code
         *
         * This is the ISO/IEC alpha2 country code for which we are operating
         * in
         */
        char country[2];

        /**
         * wps_cred_processing - Credential processing
         *
         *   0 = process received credentials internally
         *   1 = do not process received credentials; just pass them over
         *      ctrl_iface to external program(s)
         *   2 = process received credentials internally and pass them over
         *      ctrl_iface to external program(s)
         */
        int wps_cred_processing;

#define MAX_SEC_DEVICE_TYPES 5
        /**
         * sec_device_types - Secondary Device Types (P2P)
         */
        u8 sec_device_type[MAX_SEC_DEVICE_TYPES][WPS_DEV_TYPE_LEN];
        int num_sec_device_types;

        int p2p_listen_reg_class;
        int p2p_listen_channel;
        int p2p_oper_reg_class;
        int p2p_oper_channel;
        int p2p_go_intent;
        char *p2p_ssid_postfix;
        int persistent_reconnect;
        int p2p_intra_bss;
        unsigned int num_p2p_pref_chan;
        struct p2p_channel *p2p_pref_chan;
        struct wpa_freq_range_list p2p_no_go_freq;
        int p2p_add_cli_chan;
        int p2p_ignore_shared_freq;
        int p2p_optimize_listen_chan;

        struct wpabuf *wps_vendor_ext_m1;

#define MAX_WPS_VENDOR_EXT 10
        /**
         * wps_vendor_ext - Vendor extension attributes in WPS
         */
        struct wpabuf *wps_vendor_ext[MAX_WPS_VENDOR_EXT];

        /**
         * p2p_group_idle - Maximum idle time in seconds for P2P group
         *
         * This value controls how long a P2P group is maintained after there
         * is no other members in the group. As a GO, this means no associated
         * stations in the group. As a P2P client, this means no GO seen in
         * scan results. The maximum idle time is specified in seconds with 0
         * indicating no time limit, i.e., the P2P group remains in active
         * state indefinitely until explicitly removed. As a P2P client, the
         * maximum idle time of P2P_MAX_CLIENT_IDLE seconds is enforced, i.e.,
         * this parameter is mainly meant for GO use and for P2P client, it can
         * only be used to reduce the default timeout to smaller value. A
         * special value -1 can be used to configure immediate removal of the
         * group for P2P client role on any disconnection after the data
         * connection has been established.
         */
        int p2p_group_idle;

        /**
         * p2p_go_freq_change_policy - The GO frequency change policy
         *
         * This controls the behavior of the GO when there is a change in the
         * map of the currently used frequencies in case more than one channel
         * is supported.
         *
         * @P2P_GO_FREQ_MOVE_SCM: Prefer working in a single channel mode if
         * possible. In case the GO is the only interface using its frequency
         * and there are other station interfaces on other frequencies, the GO
         * will migrate to one of these frequencies.
         *
         * @P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS: Same as P2P_GO_FREQ_MOVE_SCM,
         * but a transition is possible only in case one of the other used
         * frequencies is one of the frequencies in the intersection of the
         * frequency list of the local device and the peer device.
         *
         * @P2P_GO_FREQ_MOVE_STAY: Prefer to stay on the current frequency.
         */
        enum {
                P2P_GO_FREQ_MOVE_SCM = 0,
                P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS = 1,
                P2P_GO_FREQ_MOVE_STAY = 2,
                P2P_GO_FREQ_MOVE_MAX = P2P_GO_FREQ_MOVE_STAY,
        } p2p_go_freq_change_policy;

#define DEFAULT_P2P_GO_FREQ_MOVE P2P_GO_FREQ_MOVE_STAY

        /**
         * p2p_passphrase_len - Passphrase length (8..63) for P2P GO
         *
         * This parameter controls the length of the random passphrase that is
         * generated at the GO.
         */
        unsigned int p2p_passphrase_len;

        /**
         * bss_max_count - Maximum number of BSS entries to keep in memory
         */
        unsigned int bss_max_count;

        /**
         * bss_expiration_age - BSS entry age after which it can be expired
         *
         * This value controls the time in seconds after which a BSS entry
         * gets removed if it has not been updated or is not in use.
         */
        unsigned int bss_expiration_age;

        /**
         * bss_expiration_scan_count - Expire BSS after number of scans
         *
         * If the BSS entry has not been seen in this many scans, it will be
         * removed. A value of 1 means that entry is removed after the first
         * scan in which the BSSID is not seen. Larger values can be used
         * to avoid BSS entries disappearing if they are not visible in
         * every scan (e.g., low signal quality or interference).
         */
        unsigned int bss_expiration_scan_count;

        /**
         * filter_ssids - SSID-based scan result filtering
         *
         *   0 = do not filter scan results
         *   1 = only include configured SSIDs in scan results/BSS table
         */
        int filter_ssids;

        /**
         * filter_rssi - RSSI-based scan result filtering
         *
         * 0 = do not filter scan results
         * -n = filter scan results below -n dBm
         */
        int filter_rssi;

        /**
         * max_num_sta - Maximum number of STAs in an AP/P2P GO
         */
        unsigned int max_num_sta;

        /**
         * freq_list - Array of allowed scan frequencies or %NULL for all
         *
         * This is an optional zero-terminated array of frequencies in
         * megahertz (MHz) to allow for narrowing scanning range.
         */
        int *freq_list;

        /**
         * scan_cur_freq - Whether to scan only the current channel
         *
         * If true, attempt to scan only the current channel if any other
         * VIFs on this radio are already associated on a particular channel.
         */
        int scan_cur_freq;

        /**
         * changed_parameters - Bitmap of changed parameters since last update
         */
        unsigned int changed_parameters;

        /**
         * disassoc_low_ack - Disassocicate stations with massive packet loss
         */
        int disassoc_low_ack;

        /**
         * interworking - Whether Interworking (IEEE 802.11u) is enabled
         */
        int interworking;

        /**
         * access_network_type - Access Network Type
         *
         * When Interworking is enabled, scans will be limited to APs that
         * advertise the specified Access Network Type (0..15; with 15
         * indicating wildcard match).
         */
        int access_network_type;

        /**
         * hessid - Homogenous ESS identifier
         *
         * If this is set (any octet is non-zero), scans will be used to
         * request response only from BSSes belonging to the specified
         * Homogeneous ESS. This is used only if interworking is enabled.
         */
        u8 hessid[ETH_ALEN];

        /**
         * hs20 - Hotspot 2.0
         */
        int hs20;

        /**
         * pbc_in_m1 - AP mode WPS probing workaround for PBC with Windows 7
         *
         * Windows 7 uses incorrect way of figuring out AP's WPS capabilities
         * by acting as a Registrar and using M1 from the AP. The config
         * methods attribute in that message is supposed to indicate only the
         * configuration method supported by the AP in Enrollee role, i.e., to
         * add an external Registrar. For that case, PBC shall not be used and
         * as such, the PushButton config method is removed from M1 by default.
         * If pbc_in_m1=1 is included in the configuration file, the PushButton
         * config method is left in M1 (if included in config_methods
         * parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from
         * a label in the AP).
         */
        int pbc_in_m1;

        /**
         * autoscan - Automatic scan parameters or %NULL if none
         *
         * This is an optional set of parameters for automatic scanning
         * within an interface in following format:
         * <autoscan module name>:<module parameters>
         */
        char *autoscan;

        /**
         * wps_nfc_pw_from_config - NFC Device Password was read from config
         *
         * This parameter can be determined whether the NFC Device Password was
         * included in the configuration (1) or generated dynamically (0). Only
         * the former case is re-written back to the configuration file.
         */
        int wps_nfc_pw_from_config;

        /**
         * wps_nfc_dev_pw_id - NFC Device Password ID for password token
         */
        int wps_nfc_dev_pw_id;

        /**
         * wps_nfc_dh_pubkey - NFC DH Public Key for password token
         */
        struct wpabuf *wps_nfc_dh_pubkey;

        /**
         * wps_nfc_dh_privkey - NFC DH Private Key for password token
         */
        struct wpabuf *wps_nfc_dh_privkey;

        /**
         * wps_nfc_dev_pw - NFC Device Password for password token
         */
        struct wpabuf *wps_nfc_dev_pw;

        /**
         * ext_password_backend - External password backend or %NULL if none
         *
         * format: <backend name>[:<optional backend parameters>]
         */
        char *ext_password_backend;

        /*
         * p2p_go_max_inactivity - Timeout in seconds to detect STA inactivity
         *
         * This timeout value is used in P2P GO mode to clean up
         * inactive stations.
         * By default: 300 seconds.
         */
        int p2p_go_max_inactivity;

        struct hostapd_wmm_ac_params wmm_ac_params[4];

        /**
         * auto_interworking - Whether to use network selection automatically
         *
         * 0 = do not automatically go through Interworking network selection
         *     (i.e., require explicit interworking_select command for this)
         * 1 = perform Interworking network selection if one or more
         *     credentials have been configured and scan did not find a
         *     matching network block
         */
        int auto_interworking;

        /**
         * p2p_go_ht40 - Default mode for HT40 enable when operating as GO.
         *
         * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
         * Note that regulatory constraints and driver capabilities are
         * consulted anyway, so setting it to 1 can't do real harm.
         * By default: 0 (disabled)
         */
        int p2p_go_ht40;

        /**
         * p2p_go_vht - Default mode for VHT enable when operating as GO
         *
         * This will take effect for p2p_group_add, p2p_connect, and p2p_invite.
         * Note that regulatory constraints and driver capabilities are
         * consulted anyway, so setting it to 1 can't do real harm.
         * By default: 0 (disabled)
         */
        int p2p_go_vht;

        /**
         * p2p_go_ctwindow - CTWindow to use when operating as GO
         *
         * By default: 0 (no CTWindow). Values 0-127 can be used to indicate
         * the length of the CTWindow in TUs.
         */
        int p2p_go_ctwindow;

        /**
         * p2p_disabled - Whether P2P operations are disabled for this interface
         */
        int p2p_disabled;

        /**
         * p2p_no_group_iface - Whether group interfaces can be used
         *
         * By default, wpa_supplicant will create a separate interface for P2P
         * group operations if the driver supports this. This functionality can
         * be disabled by setting this parameter to 1. In that case, the same
         * interface that was used for the P2P management operations is used
         * also for the group operation.
         */
        int p2p_no_group_iface;

        /**
         * p2p_cli_probe - Enable/disable P2P CLI probe request handling
         *
         * If this parameter is set to 1, a connected P2P Client will receive
         * and handle Probe Request frames. Setting this parameter to 0
         * disables this option. Default value: 0.
         *
         * Note: Setting this property at run time takes effect on the following
         * interface state transition to/from the WPA_COMPLETED state.
         */
        int p2p_cli_probe;

        /**
         * okc - Whether to enable opportunistic key caching by default
         *
         * By default, OKC is disabled unless enabled by the per-network
         * proactive_key_caching=1 parameter. okc=1 can be used to change this
         * default behavior.
         */
        int okc;

        /**
         * pmf - Whether to enable/require PMF by default
         *
         * By default, PMF is disabled unless enabled by the per-network
         * ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change
         * this default behavior.
         */
        enum mfp_options pmf;

        /**
         * sae_groups - Preference list of enabled groups for SAE
         *
         * By default (if this parameter is not set), the mandatory group 19
         * (ECC group defined over a 256-bit prime order field) is preferred,
         * but other groups are also enabled. If this parameter is set, the
         * groups will be tried in the indicated order.
         */
        int *sae_groups;

        /**
         * dtim_period - Default DTIM period in Beacon intervals
         *
         * This parameter can be used to set the default value for network
         * blocks that do not specify dtim_period.
         */
        int dtim_period;

        /**
         * beacon_int - Default Beacon interval in TU
         *
         * This parameter can be used to set the default value for network
         * blocks that do not specify beacon_int.
         */
        int beacon_int;

        /**
         * ap_vendor_elements: Vendor specific elements for Beacon/ProbeResp
         *
         * This parameter can be used to define additional vendor specific
         * elements for Beacon and Probe Response frames in AP/P2P GO mode. The
         * format for these element(s) is a hexdump of the raw information
         * elements (id+len+payload for one or more elements).
         */
        struct wpabuf *ap_vendor_elements;

        /**
         * ignore_old_scan_res - Ignore scan results older than request
         *
         * The driver may have a cache of scan results that makes it return
         * information that is older than our scan trigger. This parameter can
         * be used to configure such old information to be ignored instead of
         * allowing it to update the internal BSS table.
         */
        int ignore_old_scan_res;

        /**
         * sched_scan_interval -  schedule scan interval
         */
        unsigned int sched_scan_interval;

        /**
         * tdls_external_control - External control for TDLS setup requests
         *
         * Enable TDLS mode where external programs are given the control
         * to specify the TDLS link to get established to the driver. The
         * driver requests the TDLS setup to the supplicant only for the
         * specified TDLS peers.
         */
        int tdls_external_control;

        u8 ip_addr_go[4];
        u8 ip_addr_mask[4];
        u8 ip_addr_start[4];
        u8 ip_addr_end[4];

        /**
         * osu_dir - OSU provider information directory
         *
         * If set, allow FETCH_OSU control interface command to be used to fetch
         * OSU provider information into all APs and store the results in this
         * directory.
         */
        char *osu_dir;

        /**
         * wowlan_triggers - Wake-on-WLAN triggers
         *
         * If set, these wowlan triggers will be configured.
         */
        char *wowlan_triggers;

        /**
         * p2p_search_delay - Extra delay between concurrent search iterations
         *
         * Add extra delay (in milliseconds) between search iterations when
         * there is a concurrent operation to make p2p_find friendlier to
         * concurrent operations by avoiding it from taking 100% of radio
         * resources.
         */
        unsigned int p2p_search_delay;

        /**
         * mac_addr - MAC address policy default
         *
         * 0 = use permanent MAC address
         * 1 = use random MAC address for each ESS connection
         * 2 = like 1, but maintain OUI (with local admin bit set)
         *
         * By default, permanent MAC address is used unless policy is changed by
         * the per-network mac_addr parameter. Global mac_addr=1 can be used to
         * change this default behavior.
         */
        int mac_addr;

        /**
         * rand_addr_lifetime - Lifetime of random MAC address in seconds
         */
        unsigned int rand_addr_lifetime;

        /**
         * preassoc_mac_addr - Pre-association MAC address policy
         *
         * 0 = use permanent MAC address
         * 1 = use random MAC address
         * 2 = like 1, but maintain OUI (with local admin bit set)
         */
        int preassoc_mac_addr;

        /**
         * key_mgmt_offload - Use key management offload
         *
         * Key management offload should be used if the device supports it.
         * Key management offload is the capability of a device operating as
         * a station to do the exchange necessary to establish temporal keys
         * during initial RSN connection, after roaming, or during a PTK
         * rekeying operation.
         */
        int key_mgmt_offload;

        /**
         * user_mpm - MPM residency
         *
         * 0: MPM lives in driver.
         * 1: wpa_supplicant handles peering and station allocation.
         *
         * If AMPE or SAE is enabled, the MPM is always in userspace.
         */
        int user_mpm;

        /**
         * max_peer_links - Maximum number of peer links
         *
         * Maximum number of mesh peering currently maintained by the STA.
         */
        int max_peer_links;

        /**
         * cert_in_cb - Whether to include a peer certificate dump in events
         *
         * This controls whether peer certificates for authentication server and
         * its certificate chain are included in EAP peer certificate events.
         */
        int cert_in_cb;

        /**
         * mesh_max_inactivity - Timeout in seconds to detect STA inactivity
         *
         * This timeout value is used in mesh STA to clean up inactive stations.
         * By default: 300 seconds.
         */
        int mesh_max_inactivity;

        /**
         * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
         *
         * This timeout value is used in mesh STA to retransmit
         * SAE Authentication frame.
         * By default: 1000 milliseconds.
         */
        int dot11RSNASAERetransPeriod;

        /**
         * passive_scan - Whether to force passive scan for network connection
         *
         * This parameter can be used to force only passive scanning to be used
         * for network connection cases. It should be noted that this will slow
         * down scan operations and reduce likelihood of finding the AP. In
         * addition, some use cases will override this due to functional
         * requirements, e.g., for finding an AP that uses hidden SSID
         * (scan_ssid=1) or P2P device discovery.
         */
        int passive_scan;

        /**
         * reassoc_same_bss_optim - Whether to optimize reassoc-to-same-BSS
         */
        int reassoc_same_bss_optim;

        /**
         * wps_priority - Priority for the networks added through WPS
         *
         * This priority value will be set to each network profile that is added
         * by executing the WPS protocol.
         */
        int wps_priority;

        /**
         * fst_group_id - FST group ID
         */
        char *fst_group_id;

        /**
         * fst_priority - priority of the interface within the FST group
         */
        int fst_priority;

        /**
         * fst_llt - default FST LLT (Link-Lost Timeout) to be used for the
         * interface.
         */
        int fst_llt;
};


/* Prototypes for common functions from config.c */

void wpa_config_free(struct wpa_config *ssid);
void wpa_config_free_ssid(struct wpa_ssid *ssid);
void wpa_config_foreach_network(struct wpa_config *config,
                                void (*func)(void *, struct wpa_ssid *),
                                void *arg);
struct wpa_ssid * wpa_config_get_network(struct wpa_config *config, int id);
struct wpa_ssid * wpa_config_add_network(struct wpa_config *config);
int wpa_config_remove_network(struct wpa_config *config, int id);
void wpa_config_set_network_defaults(struct wpa_ssid *ssid);
int wpa_config_set(struct wpa_ssid *ssid, const char *var, const char *value,
                   int line);
int wpa_config_set_quoted(struct wpa_ssid *ssid, const char *var,
                          const char *value);
int wpa_config_dump_values(struct wpa_config *config, char *buf,
                           size_t buflen);
int wpa_config_get_value(const char *name, struct wpa_config *config,
                         char *buf, size_t buflen);

char ** wpa_config_get_all(struct wpa_ssid *ssid, int get_keys);
char * wpa_config_get(struct wpa_ssid *ssid, const char *var);
char * wpa_config_get_no_key(struct wpa_ssid *ssid, const char *var);
void wpa_config_update_psk(struct wpa_ssid *ssid);
int wpa_config_add_prio_network(struct wpa_config *config,
                                struct wpa_ssid *ssid);
int wpa_config_update_prio_list(struct wpa_config *config);
const struct wpa_config_blob * wpa_config_get_blob(struct wpa_config *config,
                                                   const char *name);
void wpa_config_set_blob(struct wpa_config *config,
                         struct wpa_config_blob *blob);
void wpa_config_free_blob(struct wpa_config_blob *blob);
int wpa_config_remove_blob(struct wpa_config *config, const char *name);
void wpa_config_flush_blobs(struct wpa_config *config);

struct wpa_cred * wpa_config_get_cred(struct wpa_config *config, int id);
struct wpa_cred * wpa_config_add_cred(struct wpa_config *config);
int wpa_config_remove_cred(struct wpa_config *config, int id);
void wpa_config_free_cred(struct wpa_cred *cred);
int wpa_config_set_cred(struct wpa_cred *cred, const char *var,
                        const char *value, int line);
char * wpa_config_get_cred_no_key(struct wpa_cred *cred, const char *var);

struct wpa_config * wpa_config_alloc_empty(const char *ctrl_interface,
                                           const char *driver_param);
#ifndef CONFIG_NO_STDOUT_DEBUG
void wpa_config_debug_dump_networks(struct wpa_config *config);
#else /* CONFIG_NO_STDOUT_DEBUG */
#define wpa_config_debug_dump_networks(c) do { } while (0)
#endif /* CONFIG_NO_STDOUT_DEBUG */


/* Prototypes for common functions from config.c */
int wpa_config_process_global(struct wpa_config *config, char *pos, int line);


/* Prototypes for backend specific functions from the selected config_*.c */

/**
 * wpa_config_read - Read and parse configuration database
 * @name: Name of the configuration (e.g., path and file name for the
 * configuration file)
 * @cfgp: Pointer to previously allocated configuration data or %NULL if none
 * Returns: Pointer to allocated configuration data or %NULL on failure
 *
 * This function reads configuration data, parses its contents, and allocates
 * data structures needed for storing configuration information. The allocated
 * data can be freed with wpa_config_free().
 *
 * Each configuration backend needs to implement this function.
 */
struct wpa_config * wpa_config_read(const char *name, struct wpa_config *cfgp);

/**
 * wpa_config_write - Write or update configuration data
 * @name: Name of the configuration (e.g., path and file name for the
 * configuration file)
 * @config: Configuration data from wpa_config_read()
 * Returns: 0 on success, -1 on failure
 *
 * This function write all configuration data into an external database (e.g.,
 * a text file) in a format that can be read with wpa_config_read(). This can
 * be used to allow wpa_supplicant to update its configuration, e.g., when a
 * new network is added or a password is changed.
 *
 * Each configuration backend needs to implement this function.
 */
int wpa_config_write(const char *name, struct wpa_config *config);

#endif /* CONFIG_H */