libeap/wpa_supplicant/examples/wps-ap-cli

   1 #!/bin/sh
   2
   3 CLI=wpa_cli
   4
   5 pbc()
   6 {
   7         echo "Starting PBC mode"
   8         echo "Push button on the station within two minutes"
   9         if ! $CLI wps_pbc | grep -q OK; then
  10                 echo "Failed to enable PBC mode"
  11         fi
  12 }
  13
  14 enter_pin()
  15 {
  16         echo "Enter a PIN from a station to be enrolled to the network."
  17         echo -n "Enrollee PIN: "
  18         read pin
  19         cpin=`$CLI wps_check_pin "$pin" | tail -1`
  20         if [ "$cpin" = "FAIL-CHECKSUM" ]; then
  21                 echo "Checksum digit is not valid"
  22                 echo -n "Do you want to use this PIN (y/n)? "
  23                 read resp
  24                 case "$resp" in
  25                         y*)
  26                                 cpin=`echo "$pin" | sed "s/[^1234567890]//g"`
  27                                 ;;
  28                         *)
  29                                 return 1
  30                                 ;;
  31                 esac
  32         fi
  33         if [ "$cpin" = "FAIL" ]; then
  34                 echo "Invalid PIN: $pin"
  35                 return 1
  36         fi
  37         echo "Enabling Enrollee PIN: $cpin"
  38         $CLI wps_pin any "$cpin"
  39 }
  40
  41 show_config()
  42 {
  43         $CLI status wps
  44 }
  45
  46 main_menu()
  47 {
  48         echo "WPS AP"
  49         echo "------"
  50         echo "1: Push button (activate PBC)"
  51         echo "2: Enter Enrollee PIN"
  52         echo "3: Show current configuration"
  53         echo "0: Exit wps-ap-cli"
  54
  55         echo -n "Command: "
  56         read cmd
  57
  58         case "$cmd" in
  59                 1)
  60                         pbc
  61                         ;;
  62                 2)
  63                         enter_pin
  64                         ;;
  65                 3)
  66                         show_config
  67                         ;;
  68                 0)
  69                         exit 0
  70                         ;;
  71                 *)
  72                         echo "Unknown command: $cmd"
  73                         ;;
  74         esac
  75
  76         echo
  77         main_menu
  78 }
  79
  80
  81 main_menu