2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
16 /* wpa_supplicant control interface - fixed message prefixes */
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** EAP authentication completed successfully */
54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
55 /** EAP authentication failed (EAP-Failure received) */
56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
57 /** Network block temporarily disabled (e.g., due to authentication failure) */
58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
59 /** Temporarily disabled network block re-enabled */
60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
61 /** New scan started */
62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
63 /** New scan results available */
64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
65 /** Scan command failed */
66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
67 /** wpa_supplicant state change */
68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
73 /** No suitable network was found */
74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
75 /** Change in the signal level was reported by the driver */
76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
77 /** Regulatory domain channel */
78 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
80 /** IP subnet status change notification
82 * When using an offloaded roaming mechanism where driver/firmware takes care
83 * of roaming and IP subnet validation checks post-roaming, this event can
84 * indicate whether IP subnet has changed.
86 * The event has a status=<0/1/2> parameter where
88 * 1 = IP subnet unchanged (can continue to use the old IP address)
89 * 2 = IP subnet changed (need to get a new IP address)
91 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
93 /** RSN IBSS 4-way handshakes completed with specified peer */
94 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
96 /** Notification of frequency conflict due to a concurrent operation.
98 * The indicated network is disabled and needs to be re-enabled before it can
101 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
102 /** Frequency ranges that the driver recommends to avoid */
103 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
104 /** WPS overlap detected in PBC mode */
105 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
106 /** Available WPS AP with active PBC found in scan results */
107 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
108 /** Available WPS AP with our address as authorized in scan results */
109 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
110 /** Available WPS AP with recently selected PIN registrar found in scan results
112 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
113 /** Available WPS AP found in scan results */
114 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
115 /** A new credential received */
116 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
118 #define WPS_EVENT_M2D "WPS-M2D "
119 /** WPS registration failed after M2/M2D */
120 #define WPS_EVENT_FAIL "WPS-FAIL "
121 /** WPS registration completed successfully */
122 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
123 /** WPS enrollment attempt timed out and was terminated */
124 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
125 /* PBC mode was activated */
126 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
127 /* PBC mode was disabled */
128 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
130 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
132 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
135 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
136 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
137 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
138 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
139 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
140 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
143 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
144 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
145 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
146 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
147 /** Mesh SAE authentication failure. Wrong password suspected. */
148 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
149 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
152 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
153 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
154 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
156 /** P2P device found */
157 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
159 /** P2P device lost */
160 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
162 /** A P2P device requested GO negotiation, but we were not ready to start the
164 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
165 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
166 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
167 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
168 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
169 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
170 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
171 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
172 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
173 /* parameters: <peer address> <PIN> */
174 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
175 /* parameters: <peer address> */
176 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
177 /* parameters: <peer address> */
178 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
179 /* parameters: <peer address> */
180 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
181 /* parameters: <peer address> <status> */
182 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
183 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
184 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
185 /* parameters: <src addr> <update indicator> <TLVs> */
186 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
187 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
188 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
189 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
190 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
191 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
192 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
193 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
194 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
195 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
196 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
197 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
199 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
200 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
201 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
203 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
204 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
206 #define INTERWORKING_AP "INTERWORKING-AP "
207 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
208 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
209 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
210 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
212 /* Credential block added; parameters: <id> */
213 #define CRED_ADDED "CRED-ADDED "
214 /* Credential block modified; parameters: <id> <field> */
215 #define CRED_MODIFIED "CRED-MODIFIED "
216 /* Credential block removed; parameters: <id> */
217 #define CRED_REMOVED "CRED-REMOVED "
219 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
220 /* parameters: <addr> <dialog_token> <freq> */
221 #define GAS_QUERY_START "GAS-QUERY-START "
222 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
223 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
225 /* parameters: <addr> <result> */
226 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
228 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
229 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
231 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
232 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
234 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
235 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
237 /* hostapd control interface - fixed message prefixes */
238 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
239 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
240 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
241 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
242 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
243 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
244 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
245 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
246 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
247 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
249 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
250 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
252 #define AP_EVENT_ENABLED "AP-ENABLED "
253 #define AP_EVENT_DISABLED "AP-DISABLED "
255 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
256 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
258 #define ACS_EVENT_STARTED "ACS-STARTED "
259 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
260 #define ACS_EVENT_FAILED "ACS-FAILED "
262 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
263 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
264 #define DFS_EVENT_CAC_START "DFS-CAC-START "
265 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
266 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
268 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
270 /* BSS Transition Management Response frame received */
271 #define BSS_TM_RESP "BSS-TM-RESP "
273 /* BSS command information masks */
275 #define WPA_BSS_MASK_ALL 0xFFFDFFFF
276 #define WPA_BSS_MASK_ID BIT(0)
277 #define WPA_BSS_MASK_BSSID BIT(1)
278 #define WPA_BSS_MASK_FREQ BIT(2)
279 #define WPA_BSS_MASK_BEACON_INT BIT(3)
280 #define WPA_BSS_MASK_CAPABILITIES BIT(4)
281 #define WPA_BSS_MASK_QUAL BIT(5)
282 #define WPA_BSS_MASK_NOISE BIT(6)
283 #define WPA_BSS_MASK_LEVEL BIT(7)
284 #define WPA_BSS_MASK_TSF BIT(8)
285 #define WPA_BSS_MASK_AGE BIT(9)
286 #define WPA_BSS_MASK_IE BIT(10)
287 #define WPA_BSS_MASK_FLAGS BIT(11)
288 #define WPA_BSS_MASK_SSID BIT(12)
289 #define WPA_BSS_MASK_WPS_SCAN BIT(13)
290 #define WPA_BSS_MASK_P2P_SCAN BIT(14)
291 #define WPA_BSS_MASK_INTERNETW BIT(15)
292 #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
293 #define WPA_BSS_MASK_DELIM BIT(17)
294 #define WPA_BSS_MASK_MESH_SCAN BIT(18)
295 #define WPA_BSS_MASK_SNR BIT(19)
296 #define WPA_BSS_MASK_EST_THROUGHPUT BIT(20)
297 #define WPA_BSS_MASK_FST BIT(21)
300 /* VENDOR_ELEM_* frame id values */
301 enum wpa_vendor_elem_frame {
302 VENDOR_ELEM_PROBE_REQ_P2P = 0,
303 VENDOR_ELEM_PROBE_RESP_P2P = 1,
304 VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
305 VENDOR_ELEM_BEACON_P2P_GO = 3,
306 VENDOR_ELEM_P2P_PD_REQ = 4,
307 VENDOR_ELEM_P2P_PD_RESP = 5,
308 VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
309 VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
310 VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
311 VENDOR_ELEM_P2P_INV_REQ = 9,
312 VENDOR_ELEM_P2P_INV_RESP = 10,
313 VENDOR_ELEM_P2P_ASSOC_REQ = 11,
314 VENDOR_ELEM_P2P_ASSOC_RESP = 12,
315 VENDOR_ELEM_ASSOC_REQ = 13,
316 NUM_VENDOR_ELEM_FRAMES
320 /* wpa_supplicant/hostapd control interface access */
323 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
324 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
325 * Returns: Pointer to abstract control interface data or %NULL on failure
327 * This function is used to open a control interface to wpa_supplicant/hostapd.
328 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
329 * is configured in wpa_supplicant/hostapd and other programs using the control
330 * interface need to use matching path configuration.
332 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
335 * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
336 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
337 * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
339 * Returns: Pointer to abstract control interface data or %NULL on failure
341 * This function is used to open a control interface to wpa_supplicant/hostapd
342 * when the socket path for client need to be specified explicitly. Default
343 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
344 * socket path is /tmp.
346 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
350 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
351 * @ctrl: Control interface data from wpa_ctrl_open()
353 * This function is used to close a control interface.
355 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
359 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
360 * @ctrl: Control interface data from wpa_ctrl_open()
361 * @cmd: Command; usually, ASCII text, e.g., "PING"
362 * @cmd_len: Length of the cmd in bytes
363 * @reply: Buffer for the response
364 * @reply_len: Reply buffer length
365 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
366 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
368 * This function is used to send commands to wpa_supplicant/hostapd. Received
369 * response will be written to reply and reply_len is set to the actual length
370 * of the reply. This function will block for up to two seconds while waiting
371 * for the reply. If unsolicited messages are received, the blocking time may
374 * msg_cb can be used to register a callback function that will be called for
375 * unsolicited messages received while waiting for the command response. These
376 * messages may be received if wpa_ctrl_request() is called at the same time as
377 * wpa_supplicant/hostapd is sending such a message. This can happen only if
378 * the program has used wpa_ctrl_attach() to register itself as a monitor for
379 * event messages. Alternatively to msg_cb, programs can register two control
380 * interface connections and use one of them for commands and the other one for
381 * receiving event messages, in other words, call wpa_ctrl_attach() only for
382 * the control interface connection that will be used for event messages.
384 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
385 char *reply, size_t *reply_len,
386 void (*msg_cb)(char *msg, size_t len));
390 * wpa_ctrl_attach - Register as an event monitor for the control interface
391 * @ctrl: Control interface data from wpa_ctrl_open()
392 * Returns: 0 on success, -1 on failure, -2 on timeout
394 * This function registers the control interface connection as a monitor for
395 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
396 * control interface connection starts receiving event messages that can be
397 * read with wpa_ctrl_recv().
399 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
403 * wpa_ctrl_detach - Unregister event monitor from the control interface
404 * @ctrl: Control interface data from wpa_ctrl_open()
405 * Returns: 0 on success, -1 on failure, -2 on timeout
407 * This function unregisters the control interface connection as a monitor for
408 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
411 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
415 * wpa_ctrl_recv - Receive a pending control interface message
416 * @ctrl: Control interface data from wpa_ctrl_open()
417 * @reply: Buffer for the message data
418 * @reply_len: Length of the reply buffer
419 * Returns: 0 on success, -1 on failure
421 * This function will receive a pending control interface message. The received
422 * response will be written to reply and reply_len is set to the actual length
425 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
426 * must have been used to register the control interface as an event monitor.
428 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
432 * wpa_ctrl_pending - Check whether there are pending event messages
433 * @ctrl: Control interface data from wpa_ctrl_open()
434 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
436 * This function will check whether there are any pending control interface
437 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
438 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
439 * register the control interface as an event monitor.
441 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
445 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
446 * @ctrl: Control interface data from wpa_ctrl_open()
447 * Returns: File descriptor used for the connection
449 * This function can be used to get the file descriptor that is used for the
450 * control interface connection. The returned value can be used, e.g., with
451 * select() while waiting for multiple events.
453 * The returned file descriptor must not be used directly for sending or
454 * receiving packets; instead, the library functions wpa_ctrl_request() and
455 * wpa_ctrl_recv() must be used for this.
457 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
461 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
462 * may be left over from clients that were previously connected to
463 * wpa_supplicant. This keeps these files from being orphaned in the
464 * event of crashes that prevented them from being removed as part
465 * of the normal orderly shutdown.
467 void wpa_ctrl_cleanup(void);
470 #ifdef CONFIG_CTRL_IFACE_UDP
471 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
472 #define WPA_CTRL_IFACE_PORT 9877
473 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
474 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
475 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
477 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
478 #endif /* CONFIG_CTRL_IFACE_UDP */
485 #endif /* WPA_CTRL_H */