2 * WPA Supplicant - Basic mesh mode routines
3 * Copyright (c) 2013-2014, cozybit, Inc. All rights reserved.
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
9 #include "utils/includes.h"
11 #include "utils/common.h"
12 #include "utils/eloop.h"
13 #include "utils/uuid.h"
14 #include "common/ieee802_11_defs.h"
15 #include "common/wpa_ctrl.h"
16 #include "ap/sta_info.h"
17 #include "ap/hostapd.h"
18 #include "ap/ieee802_11.h"
19 #include "config_ssid.h"
21 #include "wpa_supplicant_i.h"
30 static void wpa_supplicant_mesh_deinit(struct wpa_supplicant *wpa_s)
32 wpa_supplicant_mesh_iface_deinit(wpa_s, wpa_s->ifmsh);
34 wpa_s->current_ssid = NULL;
35 os_free(wpa_s->mesh_rsn);
36 wpa_s->mesh_rsn = NULL;
37 /* TODO: leave mesh (stop beacon). This will happen on link down
38 * anyway, so it's not urgent */
42 void wpa_supplicant_mesh_iface_deinit(struct wpa_supplicant *wpa_s,
43 struct hostapd_iface *ifmsh)
49 mesh_mpm_deinit(wpa_s, ifmsh);
50 if (ifmsh->mconf->rsn_ie) {
51 ifmsh->mconf->rsn_ie = NULL;
52 /* We cannot free this struct
53 * because wpa_authenticator on
54 * hostapd side is also using it
55 * for now just set to NULL and
56 * let hostapd code free it.
59 os_free(ifmsh->mconf);
63 /* take care of shared data */
64 hostapd_interface_deinit(ifmsh);
65 hostapd_interface_free(ifmsh);
69 static struct mesh_conf * mesh_config_create(struct wpa_ssid *ssid)
71 struct mesh_conf *conf;
73 conf = os_zalloc(sizeof(struct mesh_conf));
77 os_memcpy(conf->meshid, ssid->ssid, ssid->ssid_len);
78 conf->meshid_len = ssid->ssid_len;
80 if (ssid->key_mgmt & WPA_KEY_MGMT_SAE)
81 conf->security |= MESH_CONF_SEC_AUTH |
84 conf->security |= MESH_CONF_SEC_NONE;
87 conf->mesh_pp_id = MESH_PATH_PROTOCOL_HWMP;
88 conf->mesh_pm_id = MESH_PATH_METRIC_AIRTIME;
90 conf->mesh_sp_id = MESH_SYNC_METHOD_NEIGHBOR_OFFSET;
91 conf->mesh_auth_id = (conf->security & MESH_CONF_SEC_AUTH) ? 1 : 0;
92 conf->dot11MeshMaxRetries = ssid->dot11MeshMaxRetries;
93 conf->dot11MeshRetryTimeout = ssid->dot11MeshRetryTimeout;
94 conf->dot11MeshConfirmTimeout = ssid->dot11MeshConfirmTimeout;
95 conf->dot11MeshHoldingTimeout = ssid->dot11MeshHoldingTimeout;
101 static void wpas_mesh_copy_groups(struct hostapd_data *bss,
102 struct wpa_supplicant *wpa_s)
107 for (num_groups = 0; wpa_s->conf->sae_groups[num_groups] > 0;
111 groups_size = (num_groups + 1) * sizeof(wpa_s->conf->sae_groups[0]);
112 bss->conf->sae_groups = os_malloc(groups_size);
113 if (bss->conf->sae_groups)
114 os_memcpy(bss->conf->sae_groups, wpa_s->conf->sae_groups,
119 static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
120 struct wpa_ssid *ssid)
122 struct hostapd_iface *ifmsh;
123 struct hostapd_data *bss;
124 struct hostapd_config *conf;
125 struct mesh_conf *mconf;
126 int basic_rates_erp[] = { 10, 20, 55, 60, 110, 120, 240, -1 };
127 static int default_groups[] = { 19, 20, 21, 25, 26, -1 };
131 if (!wpa_s->conf->user_mpm) {
132 /* not much for us to do here */
133 wpa_msg(wpa_s, MSG_WARNING,
134 "user_mpm is not enabled in configuration");
138 wpa_s->ifmsh = ifmsh = os_zalloc(sizeof(*wpa_s->ifmsh));
142 ifmsh->drv_flags = wpa_s->drv_flags;
144 ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
145 sizeof(struct hostapd_data *));
149 ifmsh->bss[0] = bss = os_zalloc(sizeof(struct hostapd_data));
153 os_memcpy(bss->own_addr, wpa_s->own_addr, ETH_ALEN);
154 bss->driver = wpa_s->driver;
155 bss->drv_priv = wpa_s->drv_priv;
157 bss->mesh_sta_free_cb = mesh_mpm_free_sta;
158 wpa_s->assoc_freq = ssid->frequency;
159 wpa_s->current_ssid = ssid;
161 /* setup an AP config for auth processing */
162 conf = hostapd_config_defaults();
166 bss->conf = *conf->bss;
167 bss->conf->start_disabled = 1;
168 bss->conf->mesh = MESH_ENABLED;
169 bss->conf->ap_max_inactivity = wpa_s->conf->mesh_max_inactivity;
173 ifmsh->bss[0]->max_plinks = wpa_s->conf->max_peer_links;
174 ifmsh->bss[0]->dot11RSNASAERetransPeriod =
175 wpa_s->conf->dot11RSNASAERetransPeriod;
176 os_strlcpy(bss->conf->iface, wpa_s->ifname, sizeof(bss->conf->iface));
178 mconf = mesh_config_create(ssid);
181 ifmsh->mconf = mconf;
183 /* need conf->hw_mode for supported rates. */
184 if (ssid->frequency == 0) {
185 conf->hw_mode = HOSTAPD_MODE_IEEE80211G;
188 conf->hw_mode = ieee80211_freq_to_chan(ssid->frequency,
191 if (conf->hw_mode == NUM_HOSTAPD_MODES) {
192 wpa_printf(MSG_ERROR, "Unsupported mesh mode frequency: %d MHz",
197 conf->secondary_channel = ssid->ht40;
198 if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
199 conf->vht_oper_chwidth = ssid->max_oper_chwidth;
200 switch (conf->vht_oper_chwidth) {
201 case VHT_CHANWIDTH_80MHZ:
202 case VHT_CHANWIDTH_80P80MHZ:
203 ieee80211_freq_to_chan(
205 &conf->vht_oper_centr_freq_seg0_idx);
206 conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
208 case VHT_CHANWIDTH_160MHZ:
209 ieee80211_freq_to_chan(
211 &conf->vht_oper_centr_freq_seg0_idx);
212 conf->vht_oper_centr_freq_seg0_idx += ssid->ht40 * 2;
213 conf->vht_oper_centr_freq_seg0_idx += 40 / 5;
216 ieee80211_freq_to_chan(ssid->vht_center_freq2,
217 &conf->vht_oper_centr_freq_seg1_idx);
220 if (ssid->mesh_basic_rates == NULL) {
222 * XXX: Hack! This is so an MPM which correctly sets the ERP
223 * mandatory rates as BSSBasicRateSet doesn't reject us. We
224 * could add a new hw_mode HOSTAPD_MODE_IEEE80211G_ERP, but
225 * this is way easier. This also makes our BSSBasicRateSet
226 * advertised in beacons match the one in peering frames, sigh.
228 if (conf->hw_mode == HOSTAPD_MODE_IEEE80211G) {
229 conf->basic_rates = os_malloc(sizeof(basic_rates_erp));
230 if (!conf->basic_rates)
232 os_memcpy(conf->basic_rates, basic_rates_erp,
233 sizeof(basic_rates_erp));
238 if (ssid->mesh_basic_rates[rate_len] < 1)
242 conf->basic_rates = os_calloc(rate_len + 1, sizeof(int));
243 if (conf->basic_rates == NULL)
245 os_memcpy(conf->basic_rates, ssid->mesh_basic_rates,
246 rate_len * sizeof(int));
247 conf->basic_rates[rate_len] = -1;
250 if (hostapd_setup_interface(ifmsh)) {
251 wpa_printf(MSG_ERROR,
252 "Failed to initialize hostapd interface for mesh");
256 if (wpa_drv_init_mesh(wpa_s)) {
257 wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh in driver");
261 if (mconf->security != MESH_CONF_SEC_NONE) {
262 if (ssid->passphrase == NULL) {
263 wpa_printf(MSG_ERROR,
264 "mesh: Passphrase for SAE not configured");
268 bss->conf->wpa = ssid->proto;
269 bss->conf->wpa_key_mgmt = ssid->key_mgmt;
271 if (wpa_s->conf->sae_groups &&
272 wpa_s->conf->sae_groups[0] > 0) {
273 wpas_mesh_copy_groups(bss, wpa_s);
275 bss->conf->sae_groups =
276 os_malloc(sizeof(default_groups));
277 if (!bss->conf->sae_groups)
279 os_memcpy(bss->conf->sae_groups, default_groups,
280 sizeof(default_groups));
283 len = os_strlen(ssid->passphrase);
284 bss->conf->ssid.wpa_passphrase =
285 dup_binstr(ssid->passphrase, len);
287 wpa_s->mesh_rsn = mesh_rsn_auth_init(wpa_s, mconf);
288 if (!wpa_s->mesh_rsn)
292 wpa_supplicant_conf_ap_ht(wpa_s, ssid, conf);
296 wpa_supplicant_mesh_deinit(wpa_s);
301 void wpa_mesh_notify_peer(struct wpa_supplicant *wpa_s, const u8 *addr,
302 const u8 *ies, size_t ie_len)
304 struct ieee802_11_elems elems;
306 wpa_msg(wpa_s, MSG_INFO,
307 "new peer notification for " MACSTR, MAC2STR(addr));
309 if (ieee802_11_parse_elems(ies, ie_len, &elems, 0) == ParseFailed) {
310 wpa_msg(wpa_s, MSG_INFO, "Could not parse beacon from " MACSTR,
314 wpa_mesh_new_mesh_peer(wpa_s, addr, &elems);
318 void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
319 struct wpabuf **extra_ie)
321 /* EID + 0-length (wildcard) mesh-id */
324 if (wpabuf_resize(extra_ie, ielen) == 0) {
325 wpabuf_put_u8(*extra_ie, WLAN_EID_MESH_ID);
326 wpabuf_put_u8(*extra_ie, 0);
331 int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
332 struct wpa_ssid *ssid)
334 struct wpa_driver_mesh_join_params params;
337 if (!ssid || !ssid->ssid || !ssid->ssid_len || !ssid->frequency) {
342 wpa_supplicant_mesh_deinit(wpa_s);
344 if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
345 wpa_s->pairwise_cipher = WPA_CIPHER_CCMP;
346 wpa_s->group_cipher = WPA_CIPHER_CCMP;
347 wpa_s->mgmt_group_cipher = 0;
349 wpa_s->pairwise_cipher = WPA_CIPHER_NONE;
350 wpa_s->group_cipher = WPA_CIPHER_NONE;
351 wpa_s->mgmt_group_cipher = 0;
354 os_memset(¶ms, 0, sizeof(params));
355 params.meshid = ssid->ssid;
356 params.meshid_len = ssid->ssid_len;
357 ibss_mesh_setup_freq(wpa_s, ssid, ¶ms.freq);
358 wpa_s->mesh_ht_enabled = !!params.freq.ht_enabled;
359 wpa_s->mesh_vht_enabled = !!params.freq.vht_enabled;
360 if (params.freq.ht_enabled && params.freq.sec_channel_offset)
361 ssid->ht40 = params.freq.sec_channel_offset;
362 if (wpa_s->mesh_vht_enabled) {
364 switch (params.freq.bandwidth) {
366 if (params.freq.center_freq2) {
367 ssid->max_oper_chwidth = VHT_CHANWIDTH_80P80MHZ;
368 ssid->vht_center_freq2 =
369 params.freq.center_freq2;
371 ssid->max_oper_chwidth = VHT_CHANWIDTH_80MHZ;
375 ssid->max_oper_chwidth = VHT_CHANWIDTH_160MHZ;
378 ssid->max_oper_chwidth = VHT_CHANWIDTH_USE_HT;
382 if (ssid->beacon_int > 0)
383 params.beacon_int = ssid->beacon_int;
384 else if (wpa_s->conf->beacon_int > 0)
385 params.beacon_int = wpa_s->conf->beacon_int;
386 params.max_peer_links = wpa_s->conf->max_peer_links;
388 if (ssid->key_mgmt & WPA_KEY_MGMT_SAE) {
389 params.flags |= WPA_DRIVER_MESH_FLAG_SAE_AUTH;
390 params.flags |= WPA_DRIVER_MESH_FLAG_AMPE;
391 wpa_s->conf->user_mpm = 1;
394 if (wpa_s->conf->user_mpm) {
395 params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
396 params.conf.flags &= ~WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
398 params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
399 params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
401 params.conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
403 if (wpa_supplicant_mesh_init(wpa_s, ssid)) {
404 wpa_msg(wpa_s, MSG_ERROR, "Failed to init mesh");
405 wpa_drv_leave_mesh(wpa_s);
411 params.ies = wpa_s->ifmsh->mconf->rsn_ie;
412 params.ie_len = wpa_s->ifmsh->mconf->rsn_ie_len;
413 params.basic_rates = wpa_s->ifmsh->basic_rates;
416 wpa_msg(wpa_s, MSG_INFO, "joining mesh %s",
417 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
418 ret = wpa_drv_join_mesh(wpa_s, ¶ms);
420 wpa_msg(wpa_s, MSG_ERROR, "mesh join error=%d\n", ret);
422 /* hostapd sets the interface down until we associate */
423 wpa_drv_set_operstate(wpa_s, 1);
430 int wpa_supplicant_leave_mesh(struct wpa_supplicant *wpa_s)
434 wpa_msg(wpa_s, MSG_INFO, "leaving mesh");
436 /* Need to send peering close messages first */
437 wpa_supplicant_mesh_deinit(wpa_s);
439 ret = wpa_drv_leave_mesh(wpa_s);
441 wpa_msg(wpa_s, MSG_ERROR, "mesh leave error=%d", ret);
443 wpa_drv_set_operstate(wpa_s, 1);
449 static int mesh_attr_text(const u8 *ies, size_t ies_len, char *buf, char *end)
451 struct ieee802_11_elems elems;
452 char *mesh_id, *pos = buf;
453 u8 *bss_basic_rate_set;
454 int bss_basic_rate_set_len, ret, i;
456 if (ieee802_11_parse_elems(ies, ies_len, &elems, 0) == ParseFailed)
459 if (elems.mesh_id_len < 1)
462 mesh_id = os_malloc(elems.mesh_id_len + 1);
466 os_memcpy(mesh_id, elems.mesh_id, elems.mesh_id_len);
467 mesh_id[elems.mesh_id_len] = '\0';
468 ret = os_snprintf(pos, end - pos, "mesh_id=%s\n", mesh_id);
470 if (os_snprintf_error(end - pos, ret))
474 if (elems.mesh_config_len > 6) {
475 ret = os_snprintf(pos, end - pos,
476 "active_path_selection_protocol_id=0x%02x\n"
477 "active_path_selection_metric_id=0x%02x\n"
478 "congestion_control_mode_id=0x%02x\n"
479 "synchronization_method_id=0x%02x\n"
480 "authentication_protocol_id=0x%02x\n"
481 "mesh_formation_info=0x%02x\n"
482 "mesh_capability=0x%02x\n",
483 elems.mesh_config[0], elems.mesh_config[1],
484 elems.mesh_config[2], elems.mesh_config[3],
485 elems.mesh_config[4], elems.mesh_config[5],
486 elems.mesh_config[6]);
487 if (os_snprintf_error(end - pos, ret))
492 bss_basic_rate_set = os_malloc(elems.supp_rates_len +
493 elems.ext_supp_rates_len);
494 if (bss_basic_rate_set == NULL)
497 bss_basic_rate_set_len = 0;
498 for (i = 0; i < elems.supp_rates_len; i++) {
499 if (elems.supp_rates[i] & 0x80) {
500 bss_basic_rate_set[bss_basic_rate_set_len++] =
501 (elems.supp_rates[i] & 0x7f) * 5;
504 for (i = 0; i < elems.ext_supp_rates_len; i++) {
505 if (elems.ext_supp_rates[i] & 0x80) {
506 bss_basic_rate_set[bss_basic_rate_set_len++] =
507 (elems.ext_supp_rates[i] & 0x7f) * 5;
510 if (bss_basic_rate_set_len > 0) {
511 ret = os_snprintf(pos, end - pos, "bss_basic_rate_set=%d",
512 bss_basic_rate_set[0]);
513 if (os_snprintf_error(end - pos, ret))
517 for (i = 1; i < bss_basic_rate_set_len; i++) {
518 ret = os_snprintf(pos, end - pos, " %d",
519 bss_basic_rate_set[i]);
520 if (os_snprintf_error(end - pos, ret))
525 ret = os_snprintf(pos, end - pos, "\n");
526 if (os_snprintf_error(end - pos, ret))
531 os_free(bss_basic_rate_set);
537 int wpas_mesh_scan_result_text(const u8 *ies, size_t ies_len, char *buf,
540 return mesh_attr_text(ies, ies_len, buf, end);
544 static int wpas_mesh_get_ifname(struct wpa_supplicant *wpa_s, char *ifname,
547 char *ifname_ptr = wpa_s->ifname;
550 res = os_snprintf(ifname, len, "mesh-%s-%d", ifname_ptr,
552 if (os_snprintf_error(len, res) ||
553 (os_strlen(ifname) >= IFNAMSIZ &&
554 os_strlen(wpa_s->ifname) < IFNAMSIZ)) {
555 /* Try to avoid going over the IFNAMSIZ length limit */
556 res = os_snprintf(ifname, len, "mesh-%d", wpa_s->mesh_if_idx);
557 if (os_snprintf_error(len, res))
560 wpa_s->mesh_if_idx++;
565 int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
568 struct wpa_interface iface;
569 struct wpa_supplicant *mesh_wpa_s;
572 if (ifname[0] == '\0' && wpas_mesh_get_ifname(wpa_s, ifname, len) < 0)
575 if (wpa_drv_if_add(wpa_s, WPA_IF_MESH, ifname, NULL, NULL, NULL, addr,
577 wpa_printf(MSG_ERROR,
578 "mesh: Failed to create new mesh interface");
581 wpa_printf(MSG_INFO, "mesh: Created virtual interface %s addr "
582 MACSTR, ifname, MAC2STR(addr));
584 os_memset(&iface, 0, sizeof(iface));
585 iface.ifname = ifname;
586 iface.driver = wpa_s->driver->name;
587 iface.driver_param = wpa_s->conf->driver_param;
588 iface.ctrl_interface = wpa_s->conf->ctrl_interface;
590 mesh_wpa_s = wpa_supplicant_add_iface(wpa_s->global, &iface, wpa_s);
592 wpa_printf(MSG_ERROR,
593 "mesh: Failed to create new wpa_supplicant interface");
594 wpa_supplicant_remove_iface(wpa_s->global, wpa_s, 0);
597 mesh_wpa_s->mesh_if_created = 1;
602 int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr)
604 return mesh_mpm_close_peer(wpa_s, addr);