2 * WPA Supplicant - Scanning
3 * Copyright (c) 2003-2014, Jouni Malinen <j@w1.fi>
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
9 #include "utils/includes.h"
11 #include "utils/common.h"
12 #include "utils/eloop.h"
13 #include "common/ieee802_11_defs.h"
14 #include "common/wpa_ctrl.h"
16 #include "wpa_supplicant_i.h"
18 #include "wps_supplicant.h"
19 #include "p2p_supplicant.h"
21 #include "hs20_supplicant.h"
27 static void wpa_supplicant_gen_assoc_event(struct wpa_supplicant *wpa_s)
29 struct wpa_ssid *ssid;
30 union wpa_event_data data;
32 ssid = wpa_supplicant_get_ssid(wpa_s);
36 if (wpa_s->current_ssid == NULL) {
37 wpa_s->current_ssid = ssid;
38 if (wpa_s->current_ssid != NULL)
39 wpas_notify_network_changed(wpa_s);
41 wpa_supplicant_initiate_eapol(wpa_s);
42 wpa_dbg(wpa_s, MSG_DEBUG, "Already associated with a configured "
43 "network - generating associated event");
44 os_memset(&data, 0, sizeof(data));
45 wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
50 static int wpas_wps_in_use(struct wpa_supplicant *wpa_s,
51 enum wps_request_type *req_type)
53 struct wpa_ssid *ssid;
56 for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
57 if (!(ssid->key_mgmt & WPA_KEY_MGMT_WPS))
61 *req_type = wpas_wps_get_req_type(ssid);
62 if (!ssid->eap.phase1)
65 if (os_strstr(ssid->eap.phase1, "pbc=1"))
70 if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p &&
71 !wpa_s->conf->p2p_disabled) {
72 wpa_s->wps->dev.p2p = 1;
75 *req_type = WPS_REQ_ENROLLEE_INFO;
78 #endif /* CONFIG_P2P */
82 #endif /* CONFIG_WPS */
86 * wpa_supplicant_enabled_networks - Check whether there are enabled networks
87 * @wpa_s: Pointer to wpa_supplicant data
88 * Returns: 0 if no networks are enabled, >0 if networks are enabled
90 * This function is used to figure out whether any networks (or Interworking
91 * with enabled credentials and auto_interworking) are present in the current
94 int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s)
96 struct wpa_ssid *ssid = wpa_s->conf->ssid;
97 int count = 0, disabled = 0;
99 if (!wpas_network_disabled(wpa_s, ssid))
105 if (wpa_s->conf->cred && wpa_s->conf->interworking &&
106 wpa_s->conf->auto_interworking)
108 if (count == 0 && disabled > 0) {
109 wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks (%d disabled "
110 "networks)", disabled);
116 static void wpa_supplicant_assoc_try(struct wpa_supplicant *wpa_s,
117 struct wpa_ssid *ssid)
120 if (!wpas_network_disabled(wpa_s, ssid))
125 /* ap_scan=2 mode - try to associate with each SSID. */
127 wpa_dbg(wpa_s, MSG_DEBUG, "wpa_supplicant_assoc_try: Reached "
128 "end of scan list - go back to beginning");
129 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
130 wpa_supplicant_req_scan(wpa_s, 0, 0);
134 /* Continue from the next SSID on the next attempt. */
135 wpa_s->prev_scan_ssid = ssid;
137 /* Start from the beginning of the SSID list. */
138 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
140 wpa_supplicant_associate(wpa_s, NULL, ssid);
144 static void wpas_trigger_scan_cb(struct wpa_radio_work *work, int deinit)
146 struct wpa_supplicant *wpa_s = work->wpa_s;
147 struct wpa_driver_scan_params *params = work->ctx;
151 wpa_scan_free_params(params);
155 wpa_supplicant_notify_scanning(wpa_s, 1);
157 if (wpa_s->clear_driver_scan_cache)
158 params->only_new_results = 1;
159 ret = wpa_drv_scan(wpa_s, params);
160 wpa_scan_free_params(params);
163 wpa_supplicant_notify_scanning(wpa_s, 0);
164 wpas_notify_scan_done(wpa_s, 0);
165 radio_work_done(work);
169 os_get_reltime(&wpa_s->scan_trigger_time);
171 wpa_s->normal_scans++;
172 wpa_s->own_scan_requested = 1;
173 wpa_s->clear_driver_scan_cache = 0;
174 wpa_s->scan_work = work;
179 * wpa_supplicant_trigger_scan - Request driver to start a scan
180 * @wpa_s: Pointer to wpa_supplicant data
181 * @params: Scan parameters
182 * Returns: 0 on success, -1 on failure
184 int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
185 struct wpa_driver_scan_params *params)
187 struct wpa_driver_scan_params *ctx;
189 if (wpa_s->scan_work) {
190 wpa_dbg(wpa_s, MSG_INFO, "Reject scan trigger since one is already pending");
194 ctx = wpa_scan_clone_params(params);
198 if (radio_add_work(wpa_s, 0, "scan", 0, wpas_trigger_scan_cb, ctx) < 0)
200 wpa_scan_free_params(ctx);
209 wpa_supplicant_delayed_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
211 struct wpa_supplicant *wpa_s = eloop_ctx;
213 wpa_dbg(wpa_s, MSG_DEBUG, "Starting delayed sched scan");
215 if (wpa_supplicant_req_sched_scan(wpa_s))
216 wpa_supplicant_req_scan(wpa_s, 0, 0);
221 wpa_supplicant_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
223 struct wpa_supplicant *wpa_s = eloop_ctx;
225 wpa_dbg(wpa_s, MSG_DEBUG, "Sched scan timeout - stopping it");
227 wpa_s->sched_scan_timed_out = 1;
228 wpa_supplicant_cancel_sched_scan(wpa_s);
232 int wpa_supplicant_start_sched_scan(struct wpa_supplicant *wpa_s,
233 struct wpa_driver_scan_params *params,
238 wpa_supplicant_notify_scanning(wpa_s, 1);
239 ret = wpa_drv_sched_scan(wpa_s, params, interval * 1000);
241 wpa_supplicant_notify_scanning(wpa_s, 0);
243 wpa_s->sched_scanning = 1;
249 int wpa_supplicant_stop_sched_scan(struct wpa_supplicant *wpa_s)
253 ret = wpa_drv_stop_sched_scan(wpa_s);
255 wpa_dbg(wpa_s, MSG_DEBUG, "stopping sched_scan failed!");
256 /* TODO: what to do if stopping fails? */
264 static struct wpa_driver_scan_filter *
265 wpa_supplicant_build_filter_ssids(struct wpa_config *conf, size_t *num_ssids)
267 struct wpa_driver_scan_filter *ssids;
268 struct wpa_ssid *ssid;
272 if (!conf->filter_ssids)
275 for (count = 0, ssid = conf->ssid; ssid; ssid = ssid->next) {
276 if (ssid->ssid && ssid->ssid_len)
281 ssids = os_zalloc(count * sizeof(struct wpa_driver_scan_filter));
285 for (ssid = conf->ssid; ssid; ssid = ssid->next) {
286 if (!ssid->ssid || !ssid->ssid_len)
288 os_memcpy(ssids[*num_ssids].ssid, ssid->ssid, ssid->ssid_len);
289 ssids[*num_ssids].ssid_len = ssid->ssid_len;
297 static void wpa_supplicant_optimize_freqs(
298 struct wpa_supplicant *wpa_s, struct wpa_driver_scan_params *params)
301 if (params->freqs == NULL && wpa_s->p2p_in_provisioning &&
303 /* Optimize provisioning state scan based on GO information */
304 if (wpa_s->p2p_in_provisioning < 5 &&
305 wpa_s->go_params->freq > 0) {
306 wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only GO "
307 "preferred frequency %d MHz",
308 wpa_s->go_params->freq);
309 params->freqs = os_zalloc(2 * sizeof(int));
311 params->freqs[0] = wpa_s->go_params->freq;
312 } else if (wpa_s->p2p_in_provisioning < 8 &&
313 wpa_s->go_params->freq_list[0]) {
314 wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only common "
316 int_array_concat(¶ms->freqs,
317 wpa_s->go_params->freq_list);
319 int_array_sort_unique(params->freqs);
321 wpa_s->p2p_in_provisioning++;
323 #endif /* CONFIG_P2P */
326 if (params->freqs == NULL && wpa_s->after_wps && wpa_s->wps_freq) {
328 * Optimize post-provisioning scan based on channel used
329 * during provisioning.
331 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz "
332 "that was used during provisioning", wpa_s->wps_freq);
333 params->freqs = os_zalloc(2 * sizeof(int));
335 params->freqs[0] = wpa_s->wps_freq;
337 } else if (wpa_s->after_wps)
340 if (params->freqs == NULL && wpa_s->known_wps_freq && wpa_s->wps_freq)
342 /* Optimize provisioning scan based on already known channel */
343 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz",
345 params->freqs = os_zalloc(2 * sizeof(int));
347 params->freqs[0] = wpa_s->wps_freq;
348 wpa_s->known_wps_freq = 0; /* only do this once */
350 #endif /* CONFIG_WPS */
354 #ifdef CONFIG_INTERWORKING
355 static void wpas_add_interworking_elements(struct wpa_supplicant *wpa_s,
358 if (wpa_s->conf->interworking == 0)
361 wpabuf_put_u8(buf, WLAN_EID_EXT_CAPAB);
362 wpabuf_put_u8(buf, 4);
363 wpabuf_put_u8(buf, 0x00);
364 wpabuf_put_u8(buf, 0x00);
365 wpabuf_put_u8(buf, 0x00);
366 wpabuf_put_u8(buf, 0x80); /* Bit 31 - Interworking */
368 wpabuf_put_u8(buf, WLAN_EID_INTERWORKING);
369 wpabuf_put_u8(buf, is_zero_ether_addr(wpa_s->conf->hessid) ? 1 :
371 wpabuf_put_u8(buf, wpa_s->conf->access_network_type);
373 if (!is_zero_ether_addr(wpa_s->conf->hessid))
374 wpabuf_put_data(buf, wpa_s->conf->hessid, ETH_ALEN);
376 #endif /* CONFIG_INTERWORKING */
379 static struct wpabuf * wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s)
381 struct wpabuf *extra_ie = NULL;
384 enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
385 #endif /* CONFIG_WPS */
387 #ifdef CONFIG_INTERWORKING
388 if (wpa_s->conf->interworking &&
389 wpabuf_resize(&extra_ie, 100) == 0)
390 wpas_add_interworking_elements(wpa_s, extra_ie);
391 #endif /* CONFIG_INTERWORKING */
394 wps = wpas_wps_in_use(wpa_s, &req_type);
397 struct wpabuf *wps_ie;
398 wps_ie = wps_build_probe_req_ie(wps == 2 ? DEV_PW_PUSHBUTTON :
401 wpa_s->wps->uuid, req_type,
404 if (wpabuf_resize(&extra_ie, wpabuf_len(wps_ie)) == 0)
405 wpabuf_put_buf(extra_ie, wps_ie);
412 size_t ielen = p2p_scan_ie_buf_len(wpa_s->global->p2p);
413 if (wpabuf_resize(&extra_ie, ielen) == 0)
414 wpas_p2p_scan_ie(wpa_s, extra_ie);
416 #endif /* CONFIG_P2P */
418 #endif /* CONFIG_WPS */
421 if (wpa_s->conf->hs20 && wpabuf_resize(&extra_ie, 7) == 0)
422 wpas_hs20_add_indication(extra_ie);
423 #endif /* CONFIG_HS20 */
432 * Check whether there are any enabled networks or credentials that could be
433 * used for a non-P2P connection.
435 static int non_p2p_network_enabled(struct wpa_supplicant *wpa_s)
437 struct wpa_ssid *ssid;
439 for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
440 if (wpas_network_disabled(wpa_s, ssid))
442 if (!ssid->p2p_group)
446 if (wpa_s->conf->cred && wpa_s->conf->interworking &&
447 wpa_s->conf->auto_interworking)
453 #endif /* CONFIG_P2P */
456 static struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
458 enum hostapd_hw_mode mode)
462 for (i = 0; i < num_modes; i++) {
463 if (modes[i].mode == mode)
471 static void wpa_setband_scan_freqs_list(struct wpa_supplicant *wpa_s,
472 enum hostapd_hw_mode band,
473 struct wpa_driver_scan_params *params)
475 /* Include only supported channels for the specified band */
476 struct hostapd_hw_modes *mode;
479 mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band);
481 /* No channels supported in this band - use empty list */
482 params->freqs = os_zalloc(sizeof(int));
486 params->freqs = os_zalloc((mode->num_channels + 1) * sizeof(int));
487 if (params->freqs == NULL)
489 for (count = 0, i = 0; i < mode->num_channels; i++) {
490 if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
492 params->freqs[count++] = mode->channels[i].freq;
497 static void wpa_setband_scan_freqs(struct wpa_supplicant *wpa_s,
498 struct wpa_driver_scan_params *params)
500 if (wpa_s->hw.modes == NULL)
501 return; /* unknown what channels the driver supports */
503 return; /* already using a limited channel set */
504 if (wpa_s->setband == WPA_SETBAND_5G)
505 wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211A,
507 else if (wpa_s->setband == WPA_SETBAND_2G)
508 wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G,
513 static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx)
515 struct wpa_supplicant *wpa_s = eloop_ctx;
516 struct wpa_ssid *ssid;
518 struct wpabuf *extra_ie = NULL;
519 struct wpa_driver_scan_params params;
520 struct wpa_driver_scan_params *scan_params;
522 enum wpa_states prev_state;
525 wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - PNO is in progress");
529 if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) {
530 wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - interface disabled");
534 if (wpa_s->disconnected && wpa_s->scan_req == NORMAL_SCAN_REQ) {
535 wpa_dbg(wpa_s, MSG_DEBUG, "Disconnected - do not scan");
536 wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
540 if (wpa_s->scanning) {
542 * If we are already in scanning state, we shall reschedule the
543 * the incoming scan request.
545 wpa_dbg(wpa_s, MSG_DEBUG, "Already scanning - Reschedule the incoming scan req");
546 wpa_supplicant_req_scan(wpa_s, 1, 0);
550 if (!wpa_supplicant_enabled_networks(wpa_s) &&
551 wpa_s->scan_req == NORMAL_SCAN_REQ) {
552 wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks - do not scan");
553 wpa_supplicant_set_state(wpa_s, WPA_INACTIVE);
557 if (wpa_s->conf->ap_scan != 0 &&
558 (wpa_s->drv_flags & WPA_DRIVER_FLAGS_WIRED)) {
559 wpa_dbg(wpa_s, MSG_DEBUG, "Using wired authentication - "
560 "overriding ap_scan configuration");
561 wpa_s->conf->ap_scan = 0;
562 wpas_notify_ap_scan_changed(wpa_s);
565 if (wpa_s->conf->ap_scan == 0) {
566 wpa_supplicant_gen_assoc_event(wpa_s);
571 if (wpas_p2p_in_progress(wpa_s)) {
572 wpa_dbg(wpa_s, MSG_DEBUG, "Delay station mode scan while P2P operation is in progress");
573 wpa_supplicant_req_scan(wpa_s, 5, 0);
576 #endif /* CONFIG_P2P */
578 if (wpa_s->conf->ap_scan == 2)
581 max_ssids = wpa_s->max_scan_ssids;
582 if (max_ssids > WPAS_MAX_SCAN_SSIDS)
583 max_ssids = WPAS_MAX_SCAN_SSIDS;
586 wpa_s->last_scan_req = wpa_s->scan_req;
587 wpa_s->scan_req = NORMAL_SCAN_REQ;
589 os_memset(¶ms, 0, sizeof(params));
591 prev_state = wpa_s->wpa_state;
592 if (wpa_s->wpa_state == WPA_DISCONNECTED ||
593 wpa_s->wpa_state == WPA_INACTIVE)
594 wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
597 * If autoscan has set its own scanning parameters
599 if (wpa_s->autoscan_params != NULL) {
600 scan_params = wpa_s->autoscan_params;
604 if (wpa_s->last_scan_req != MANUAL_SCAN_REQ &&
605 wpa_s->connect_without_scan) {
606 for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
607 if (ssid == wpa_s->connect_without_scan)
610 wpa_s->connect_without_scan = NULL;
612 wpa_printf(MSG_DEBUG, "Start a pre-selected network "
613 "without scan step");
614 wpa_supplicant_associate(wpa_s, NULL, ssid);
620 if ((wpa_s->p2p_in_provisioning || wpa_s->show_group_started) &&
622 wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during P2P group formation (p2p_in_provisioning=%d show_group_started=%d)",
623 wpa_s->p2p_in_provisioning,
624 wpa_s->show_group_started);
625 params.ssids[0].ssid = wpa_s->go_params->ssid;
626 params.ssids[0].ssid_len = wpa_s->go_params->ssid_len;
627 params.num_ssids = 1;
630 #endif /* CONFIG_P2P */
632 /* Find the starting point from which to continue scanning */
633 ssid = wpa_s->conf->ssid;
634 if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
636 if (ssid == wpa_s->prev_scan_ssid) {
644 if (wpa_s->last_scan_req != MANUAL_SCAN_REQ &&
645 wpa_s->conf->ap_scan == 2) {
646 wpa_s->connect_without_scan = NULL;
647 wpa_s->prev_scan_wildcard = 0;
648 wpa_supplicant_assoc_try(wpa_s, ssid);
650 } else if (wpa_s->conf->ap_scan == 2) {
652 * User-initiated scan request in ap_scan == 2; scan with
657 struct wpa_ssid *start = ssid, *tssid;
659 if (ssid == NULL && max_ssids > 1)
660 ssid = wpa_s->conf->ssid;
662 if (!wpas_network_disabled(wpa_s, ssid) &&
664 wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID",
665 ssid->ssid, ssid->ssid_len);
666 params.ssids[params.num_ssids].ssid =
668 params.ssids[params.num_ssids].ssid_len =
671 if (params.num_ssids + 1 >= max_ssids)
677 if (ssid == NULL && max_ssids > 1 &&
678 start != wpa_s->conf->ssid)
679 ssid = wpa_s->conf->ssid;
682 for (tssid = wpa_s->conf->ssid; tssid; tssid = tssid->next) {
683 if (wpas_network_disabled(wpa_s, tssid))
685 if ((params.freqs || !freqs_set) && tssid->scan_freq) {
686 int_array_concat(¶ms.freqs,
689 os_free(params.freqs);
694 int_array_sort_unique(params.freqs);
697 if (ssid && max_ssids == 1) {
699 * If the driver is limited to 1 SSID at a time interleave
700 * wildcard SSID scans with specific SSID scans to avoid
701 * waiting a long time for a wildcard scan.
703 if (!wpa_s->prev_scan_wildcard) {
704 params.ssids[0].ssid = NULL;
705 params.ssids[0].ssid_len = 0;
706 wpa_s->prev_scan_wildcard = 1;
707 wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for "
708 "wildcard SSID (Interleave with specific)");
710 wpa_s->prev_scan_ssid = ssid;
711 wpa_s->prev_scan_wildcard = 0;
712 wpa_dbg(wpa_s, MSG_DEBUG,
713 "Starting AP scan for specific SSID: %s",
714 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
719 wpa_s->prev_scan_ssid = ssid;
720 wpa_dbg(wpa_s, MSG_DEBUG, "Include wildcard SSID in "
723 } else if (wpa_s->last_scan_req == MANUAL_SCAN_REQ &&
724 wpa_s->manual_scan_passive && params.num_ssids == 0) {
725 wpa_dbg(wpa_s, MSG_DEBUG, "Use passive scan based on manual request");
727 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
729 wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for wildcard "
734 #endif /* CONFIG_P2P */
736 wpa_supplicant_optimize_freqs(wpa_s, ¶ms);
737 extra_ie = wpa_supplicant_extra_ies(wpa_s);
739 if (wpa_s->last_scan_req == MANUAL_SCAN_REQ &&
740 wpa_s->manual_scan_only_new)
741 params.only_new_results = 1;
743 if (wpa_s->last_scan_req == MANUAL_SCAN_REQ && params.freqs == NULL &&
744 wpa_s->manual_scan_freqs) {
745 wpa_dbg(wpa_s, MSG_DEBUG, "Limit manual scan to specified channels");
746 params.freqs = wpa_s->manual_scan_freqs;
747 wpa_s->manual_scan_freqs = NULL;
750 if (params.freqs == NULL && wpa_s->next_scan_freqs) {
751 wpa_dbg(wpa_s, MSG_DEBUG, "Optimize scan based on previously "
752 "generated frequency list");
753 params.freqs = wpa_s->next_scan_freqs;
755 os_free(wpa_s->next_scan_freqs);
756 wpa_s->next_scan_freqs = NULL;
757 wpa_setband_scan_freqs(wpa_s, ¶ms);
759 /* See if user specified frequencies. If so, scan only those. */
760 if (wpa_s->conf->freq_list && !params.freqs) {
761 wpa_dbg(wpa_s, MSG_DEBUG,
762 "Optimize scan based on conf->freq_list");
763 int_array_concat(¶ms.freqs, wpa_s->conf->freq_list);
766 /* Use current associated channel? */
767 if (wpa_s->conf->scan_cur_freq && !params.freqs) {
768 unsigned int num = wpa_s->num_multichan_concurrent;
770 params.freqs = os_calloc(num + 1, sizeof(int));
772 num = get_shared_radio_freqs(wpa_s, params.freqs, num);
774 wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the "
775 "current operating channels since "
776 "scan_cur_freq is enabled");
778 os_free(params.freqs);
784 params.filter_ssids = wpa_supplicant_build_filter_ssids(
785 wpa_s->conf, ¶ms.num_filter_ssids);
787 params.extra_ies = wpabuf_head(extra_ie);
788 params.extra_ies_len = wpabuf_len(extra_ie);
792 if (wpa_s->p2p_in_provisioning ||
793 (wpa_s->show_group_started && wpa_s->go_params)) {
795 * The interface may not yet be in P2P mode, so we have to
796 * explicitly request P2P probe to disable CCK rates.
798 params.p2p_probe = 1;
800 #endif /* CONFIG_P2P */
802 scan_params = ¶ms;
807 * If the driver does not support multi-channel concurrency and a
808 * virtual interface that shares the same radio with the wpa_s interface
809 * is operating there may not be need to scan other channels apart from
810 * the current operating channel on the other virtual interface. Filter
811 * out other channels in case we are trying to find a connection for a
812 * station interface when we are not configured to prefer station
813 * connection and a concurrent operation is already in process.
815 if (wpa_s->scan_for_connection &&
816 wpa_s->last_scan_req == NORMAL_SCAN_REQ &&
817 !scan_params->freqs && !params.freqs &&
818 wpas_is_p2p_prioritized(wpa_s) &&
819 wpa_s->p2p_group_interface == NOT_P2P_GROUP_INTERFACE &&
820 non_p2p_network_enabled(wpa_s)) {
821 unsigned int num = wpa_s->num_multichan_concurrent;
823 params.freqs = os_calloc(num + 1, sizeof(int));
825 num = get_shared_radio_freqs(wpa_s, params.freqs, num);
826 if (num > 0 && num == wpa_s->num_multichan_concurrent) {
827 wpa_dbg(wpa_s, MSG_DEBUG, "Scan only the current operating channels since all channels are already used");
829 os_free(params.freqs);
834 #endif /* CONFIG_P2P */
836 ret = wpa_supplicant_trigger_scan(wpa_s, scan_params);
838 if (ret && wpa_s->last_scan_req == MANUAL_SCAN_REQ && params.freqs &&
839 !wpa_s->manual_scan_freqs) {
840 /* Restore manual_scan_freqs for the next attempt */
841 wpa_s->manual_scan_freqs = params.freqs;
845 wpabuf_free(extra_ie);
846 os_free(params.freqs);
847 os_free(params.filter_ssids);
850 wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate AP scan");
851 if (prev_state != wpa_s->wpa_state)
852 wpa_supplicant_set_state(wpa_s, prev_state);
853 /* Restore scan_req since we will try to scan again */
854 wpa_s->scan_req = wpa_s->last_scan_req;
855 wpa_supplicant_req_scan(wpa_s, 1, 0);
857 wpa_s->scan_for_connection = 0;
862 void wpa_supplicant_update_scan_int(struct wpa_supplicant *wpa_s, int sec)
864 struct os_reltime remaining, new_int;
867 cancelled = eloop_cancel_timeout_one(wpa_supplicant_scan, wpa_s, NULL,
872 if (cancelled && os_reltime_before(&remaining, &new_int)) {
873 new_int.sec = remaining.sec;
874 new_int.usec = remaining.usec;
878 eloop_register_timeout(new_int.sec, new_int.usec,
879 wpa_supplicant_scan, wpa_s, NULL);
881 wpa_s->scan_interval = sec;
886 * wpa_supplicant_req_scan - Schedule a scan for neighboring access points
887 * @wpa_s: Pointer to wpa_supplicant data
888 * @sec: Number of seconds after which to scan
889 * @usec: Number of microseconds after which to scan
891 * This function is used to schedule a scan for neighboring access points after
892 * the specified time.
894 void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec)
896 int res = eloop_deplete_timeout(sec, usec, wpa_supplicant_scan, wpa_s,
899 wpa_dbg(wpa_s, MSG_DEBUG, "Rescheduling scan request: %d.%06d sec",
901 } else if (res == 0) {
902 wpa_dbg(wpa_s, MSG_DEBUG, "Ignore new scan request for %d.%06d sec since an earlier request is scheduled to trigger sooner",
905 wpa_dbg(wpa_s, MSG_DEBUG, "Setting scan request: %d.%06d sec",
907 eloop_register_timeout(sec, usec, wpa_supplicant_scan, wpa_s, NULL);
913 * wpa_supplicant_delayed_sched_scan - Request a delayed scheduled scan
914 * @wpa_s: Pointer to wpa_supplicant data
915 * @sec: Number of seconds after which to scan
916 * @usec: Number of microseconds after which to scan
917 * Returns: 0 on success or -1 otherwise
919 * This function is used to schedule periodic scans for neighboring
920 * access points after the specified time.
922 int wpa_supplicant_delayed_sched_scan(struct wpa_supplicant *wpa_s,
925 if (!wpa_s->sched_scan_supported)
928 eloop_register_timeout(sec, usec,
929 wpa_supplicant_delayed_sched_scan_timeout,
937 * wpa_supplicant_req_sched_scan - Start a periodic scheduled scan
938 * @wpa_s: Pointer to wpa_supplicant data
939 * Returns: 0 is sched_scan was started or -1 otherwise
941 * This function is used to schedule periodic scans for neighboring
942 * access points repeating the scan continuously.
944 int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s)
946 struct wpa_driver_scan_params params;
947 struct wpa_driver_scan_params *scan_params;
948 enum wpa_states prev_state;
949 struct wpa_ssid *ssid = NULL;
950 struct wpabuf *extra_ie = NULL;
952 unsigned int max_sched_scan_ssids;
956 if (!wpa_s->sched_scan_supported)
959 if (wpa_s->max_sched_scan_ssids > WPAS_MAX_SCAN_SSIDS)
960 max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS;
962 max_sched_scan_ssids = wpa_s->max_sched_scan_ssids;
963 if (max_sched_scan_ssids < 1 || wpa_s->conf->disable_scan_offload)
966 if (wpa_s->sched_scanning) {
967 wpa_dbg(wpa_s, MSG_DEBUG, "Already sched scanning");
972 for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
973 if (!wpas_network_disabled(wpa_s, ssid) && !ssid->scan_ssid) {
974 /* Use wildcard SSID to find this network */
976 } else if (!wpas_network_disabled(wpa_s, ssid) &&
981 if (!wpas_network_disabled(wpa_s, ssid) &&
982 ssid->key_mgmt == WPA_KEY_MGMT_WPS) {
984 * Normal scan is more reliable and faster for WPS
985 * operations and since these are for short periods of
986 * time, the benefit of trying to use sched_scan would
989 wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
990 "sched_scan for WPS");
993 #endif /* CONFIG_WPS */
998 if (wpa_s->normal_scans < 3 &&
999 (need_ssids <= wpa_s->max_scan_ssids ||
1000 wpa_s->max_scan_ssids >= (int) max_sched_scan_ssids)) {
1002 * When normal scan can speed up operations, use that for the
1003 * first operations before starting the sched_scan to allow
1004 * user space sleep more. We do this only if the normal scan
1005 * has functionality that is suitable for this or if the
1006 * sched_scan does not have better support for multiple SSIDs.
1008 wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
1009 "sched_scan for initial scans (normal_scans=%d)",
1010 wpa_s->normal_scans);
1014 os_memset(¶ms, 0, sizeof(params));
1016 /* If we can't allocate space for the filters, we just don't filter */
1017 params.filter_ssids = os_zalloc(wpa_s->max_match_sets *
1018 sizeof(struct wpa_driver_scan_filter));
1020 prev_state = wpa_s->wpa_state;
1021 if (wpa_s->wpa_state == WPA_DISCONNECTED ||
1022 wpa_s->wpa_state == WPA_INACTIVE)
1023 wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
1025 if (wpa_s->autoscan_params != NULL) {
1026 scan_params = wpa_s->autoscan_params;
1030 /* Find the starting point from which to continue scanning */
1031 ssid = wpa_s->conf->ssid;
1032 if (wpa_s->prev_sched_ssid) {
1034 if (ssid == wpa_s->prev_sched_ssid) {
1042 if (!ssid || !wpa_s->prev_sched_ssid) {
1043 wpa_dbg(wpa_s, MSG_DEBUG, "Beginning of SSID list");
1044 if (wpa_s->conf->sched_scan_interval)
1045 wpa_s->sched_scan_interval =
1046 wpa_s->conf->sched_scan_interval;
1047 if (wpa_s->sched_scan_interval == 0)
1048 wpa_s->sched_scan_interval = 10;
1049 wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
1050 wpa_s->first_sched_scan = 1;
1051 ssid = wpa_s->conf->ssid;
1052 wpa_s->prev_sched_ssid = ssid;
1056 wpa_dbg(wpa_s, MSG_DEBUG, "Add wildcard SSID to sched_scan");
1061 if (wpas_network_disabled(wpa_s, ssid))
1064 if (params.num_filter_ssids < wpa_s->max_match_sets &&
1065 params.filter_ssids && ssid->ssid && ssid->ssid_len) {
1066 wpa_dbg(wpa_s, MSG_DEBUG, "add to filter ssid: %s",
1067 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
1068 os_memcpy(params.filter_ssids[params.num_filter_ssids].ssid,
1069 ssid->ssid, ssid->ssid_len);
1070 params.filter_ssids[params.num_filter_ssids].ssid_len =
1072 params.num_filter_ssids++;
1073 } else if (params.filter_ssids && ssid->ssid && ssid->ssid_len)
1075 wpa_dbg(wpa_s, MSG_DEBUG, "Not enough room for SSID "
1076 "filter for sched_scan - drop filter");
1077 os_free(params.filter_ssids);
1078 params.filter_ssids = NULL;
1079 params.num_filter_ssids = 0;
1082 if (ssid->scan_ssid && ssid->ssid && ssid->ssid_len) {
1083 if (params.num_ssids == max_sched_scan_ssids)
1084 break; /* only room for broadcast SSID */
1085 wpa_dbg(wpa_s, MSG_DEBUG,
1086 "add to active scan ssid: %s",
1087 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
1088 params.ssids[params.num_ssids].ssid =
1090 params.ssids[params.num_ssids].ssid_len =
1093 if (params.num_ssids >= max_sched_scan_ssids) {
1094 wpa_s->prev_sched_ssid = ssid;
1098 (wpas_network_disabled(wpa_s, ssid) ||
1105 wpa_s->prev_sched_ssid = ssid;
1109 if (params.num_filter_ssids == 0) {
1110 os_free(params.filter_ssids);
1111 params.filter_ssids = NULL;
1114 extra_ie = wpa_supplicant_extra_ies(wpa_s);
1116 params.extra_ies = wpabuf_head(extra_ie);
1117 params.extra_ies_len = wpabuf_len(extra_ie);
1120 scan_params = ¶ms;
1123 if (ssid || !wpa_s->first_sched_scan) {
1124 wpa_dbg(wpa_s, MSG_DEBUG,
1125 "Starting sched scan: interval %d timeout %d",
1126 wpa_s->sched_scan_interval, wpa_s->sched_scan_timeout);
1128 wpa_dbg(wpa_s, MSG_DEBUG,
1129 "Starting sched scan: interval %d (no timeout)",
1130 wpa_s->sched_scan_interval);
1133 wpa_setband_scan_freqs(wpa_s, scan_params);
1135 ret = wpa_supplicant_start_sched_scan(wpa_s, scan_params,
1136 wpa_s->sched_scan_interval);
1137 wpabuf_free(extra_ie);
1138 os_free(params.filter_ssids);
1140 wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate sched scan");
1141 if (prev_state != wpa_s->wpa_state)
1142 wpa_supplicant_set_state(wpa_s, prev_state);
1146 /* If we have more SSIDs to scan, add a timeout so we scan them too */
1147 if (ssid || !wpa_s->first_sched_scan) {
1148 wpa_s->sched_scan_timed_out = 0;
1149 eloop_register_timeout(wpa_s->sched_scan_timeout, 0,
1150 wpa_supplicant_sched_scan_timeout,
1152 wpa_s->first_sched_scan = 0;
1153 wpa_s->sched_scan_timeout /= 2;
1154 wpa_s->sched_scan_interval *= 2;
1155 if (wpa_s->sched_scan_timeout < wpa_s->sched_scan_interval) {
1156 wpa_s->sched_scan_interval = 10;
1157 wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
1161 /* If there is no more ssids, start next time from the beginning */
1163 wpa_s->prev_sched_ssid = NULL;
1170 * wpa_supplicant_cancel_scan - Cancel a scheduled scan request
1171 * @wpa_s: Pointer to wpa_supplicant data
1173 * This function is used to cancel a scan request scheduled with
1174 * wpa_supplicant_req_scan().
1176 void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s)
1178 wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling scan request");
1179 eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
1184 * wpa_supplicant_cancel_delayed_sched_scan - Stop a delayed scheduled scan
1185 * @wpa_s: Pointer to wpa_supplicant data
1187 * This function is used to stop a delayed scheduled scan.
1189 void wpa_supplicant_cancel_delayed_sched_scan(struct wpa_supplicant *wpa_s)
1191 if (!wpa_s->sched_scan_supported)
1194 wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling delayed sched scan");
1195 eloop_cancel_timeout(wpa_supplicant_delayed_sched_scan_timeout,
1201 * wpa_supplicant_cancel_sched_scan - Stop running scheduled scans
1202 * @wpa_s: Pointer to wpa_supplicant data
1204 * This function is used to stop a periodic scheduled scan.
1206 void wpa_supplicant_cancel_sched_scan(struct wpa_supplicant *wpa_s)
1208 if (!wpa_s->sched_scanning)
1211 wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling sched scan");
1212 eloop_cancel_timeout(wpa_supplicant_sched_scan_timeout, wpa_s, NULL);
1213 wpa_supplicant_stop_sched_scan(wpa_s);
1218 * wpa_supplicant_notify_scanning - Indicate possible scan state change
1219 * @wpa_s: Pointer to wpa_supplicant data
1220 * @scanning: Whether scanning is currently in progress
1222 * This function is to generate scanning notifycations. It is called whenever
1223 * there may have been a change in scanning (scan started, completed, stopped).
1224 * wpas_notify_scanning() is called whenever the scanning state changed from the
1225 * previously notified state.
1227 void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
1230 if (wpa_s->scanning != scanning) {
1231 wpa_s->scanning = scanning;
1232 wpas_notify_scanning(wpa_s);
1237 static int wpa_scan_get_max_rate(const struct wpa_scan_res *res)
1243 ie = wpa_scan_get_ie(res, WLAN_EID_SUPP_RATES);
1244 for (i = 0; ie && i < ie[1]; i++) {
1245 if ((ie[i + 2] & 0x7f) > rate)
1246 rate = ie[i + 2] & 0x7f;
1249 ie = wpa_scan_get_ie(res, WLAN_EID_EXT_SUPP_RATES);
1250 for (i = 0; ie && i < ie[1]; i++) {
1251 if ((ie[i + 2] & 0x7f) > rate)
1252 rate = ie[i + 2] & 0x7f;
1260 * wpa_scan_get_ie - Fetch a specified information element from a scan result
1261 * @res: Scan result entry
1262 * @ie: Information element identitifier (WLAN_EID_*)
1263 * Returns: Pointer to the information element (id field) or %NULL if not found
1265 * This function returns the first matching information element in the scan
1268 const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie)
1270 const u8 *end, *pos;
1272 pos = (const u8 *) (res + 1);
1273 end = pos + res->ie_len;
1275 while (pos + 1 < end) {
1276 if (pos + 2 + pos[1] > end)
1288 * wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result
1289 * @res: Scan result entry
1290 * @vendor_type: Vendor type (four octets starting the IE payload)
1291 * Returns: Pointer to the information element (id field) or %NULL if not found
1293 * This function returns the first matching information element in the scan
1296 const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
1299 const u8 *end, *pos;
1301 pos = (const u8 *) (res + 1);
1302 end = pos + res->ie_len;
1304 while (pos + 1 < end) {
1305 if (pos + 2 + pos[1] > end)
1307 if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
1308 vendor_type == WPA_GET_BE32(&pos[2]))
1318 * wpa_scan_get_vendor_ie_beacon - Fetch vendor information from a scan result
1319 * @res: Scan result entry
1320 * @vendor_type: Vendor type (four octets starting the IE payload)
1321 * Returns: Pointer to the information element (id field) or %NULL if not found
1323 * This function returns the first matching information element in the scan
1326 * This function is like wpa_scan_get_vendor_ie(), but uses IE buffer only
1327 * from Beacon frames instead of either Beacon or Probe Response frames.
1329 const u8 * wpa_scan_get_vendor_ie_beacon(const struct wpa_scan_res *res,
1332 const u8 *end, *pos;
1334 if (res->beacon_ie_len == 0)
1337 pos = (const u8 *) (res + 1);
1339 end = pos + res->beacon_ie_len;
1341 while (pos + 1 < end) {
1342 if (pos + 2 + pos[1] > end)
1344 if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
1345 vendor_type == WPA_GET_BE32(&pos[2]))
1355 * wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result
1356 * @res: Scan result entry
1357 * @vendor_type: Vendor type (four octets starting the IE payload)
1358 * Returns: Pointer to the information element payload or %NULL if not found
1360 * This function returns concatenated payload of possibly fragmented vendor
1361 * specific information elements in the scan result. The caller is responsible
1362 * for freeing the returned buffer.
1364 struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
1368 const u8 *end, *pos;
1370 buf = wpabuf_alloc(res->ie_len);
1374 pos = (const u8 *) (res + 1);
1375 end = pos + res->ie_len;
1377 while (pos + 1 < end) {
1378 if (pos + 2 + pos[1] > end)
1380 if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
1381 vendor_type == WPA_GET_BE32(&pos[2]))
1382 wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
1386 if (wpabuf_len(buf) == 0) {
1396 * Channels with a great SNR can operate at full rate. What is a great SNR?
1397 * This doc https://supportforums.cisco.com/docs/DOC-12954 says, "the general
1398 * rule of thumb is that any SNR above 20 is good." This one
1399 * http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml#qa23
1400 * recommends 25 as a minimum SNR for 54 Mbps data rate. 30 is chosen here as a
1401 * conservative value.
1403 #define GREAT_SNR 30
1405 /* Compare function for sorting scan results. Return >0 if @b is considered
1407 static int wpa_scan_result_compar(const void *a, const void *b)
1409 #define IS_5GHZ(n) (n > 4000)
1410 #define MIN(a,b) a < b ? a : b
1411 struct wpa_scan_res **_wa = (void *) a;
1412 struct wpa_scan_res **_wb = (void *) b;
1413 struct wpa_scan_res *wa = *_wa;
1414 struct wpa_scan_res *wb = *_wb;
1415 int wpa_a, wpa_b, maxrate_a, maxrate_b;
1418 /* WPA/WPA2 support preferred */
1419 wpa_a = wpa_scan_get_vendor_ie(wa, WPA_IE_VENDOR_TYPE) != NULL ||
1420 wpa_scan_get_ie(wa, WLAN_EID_RSN) != NULL;
1421 wpa_b = wpa_scan_get_vendor_ie(wb, WPA_IE_VENDOR_TYPE) != NULL ||
1422 wpa_scan_get_ie(wb, WLAN_EID_RSN) != NULL;
1424 if (wpa_b && !wpa_a)
1426 if (!wpa_b && wpa_a)
1429 /* privacy support preferred */
1430 if ((wa->caps & IEEE80211_CAP_PRIVACY) == 0 &&
1431 (wb->caps & IEEE80211_CAP_PRIVACY))
1433 if ((wa->caps & IEEE80211_CAP_PRIVACY) &&
1434 (wb->caps & IEEE80211_CAP_PRIVACY) == 0)
1437 if ((wa->flags & wb->flags & WPA_SCAN_LEVEL_DBM) &&
1438 !((wa->flags | wb->flags) & WPA_SCAN_NOISE_INVALID)) {
1439 snr_a = MIN(wa->level - wa->noise, GREAT_SNR);
1440 snr_b = MIN(wb->level - wb->noise, GREAT_SNR);
1442 /* Not suitable information to calculate SNR, so use level */
1447 /* best/max rate preferred if SNR close enough */
1448 if ((snr_a && snr_b && abs(snr_b - snr_a) < 5) ||
1449 (wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) {
1450 maxrate_a = wpa_scan_get_max_rate(wa);
1451 maxrate_b = wpa_scan_get_max_rate(wb);
1452 if (maxrate_a != maxrate_b)
1453 return maxrate_b - maxrate_a;
1454 if (IS_5GHZ(wa->freq) ^ IS_5GHZ(wb->freq))
1455 return IS_5GHZ(wa->freq) ? -1 : 1;
1458 /* use freq for channel preference */
1460 /* all things being equal, use SNR; if SNRs are
1461 * identical, use quality values since some drivers may only report
1462 * that value and leave the signal level zero */
1464 return wb->qual - wa->qual;
1465 return snr_b - snr_a;
1472 /* Compare function for sorting scan results when searching a WPS AP for
1473 * provisioning. Return >0 if @b is considered better. */
1474 static int wpa_scan_result_wps_compar(const void *a, const void *b)
1476 struct wpa_scan_res **_wa = (void *) a;
1477 struct wpa_scan_res **_wb = (void *) b;
1478 struct wpa_scan_res *wa = *_wa;
1479 struct wpa_scan_res *wb = *_wb;
1480 int uses_wps_a, uses_wps_b;
1481 struct wpabuf *wps_a, *wps_b;
1484 /* Optimization - check WPS IE existence before allocated memory and
1485 * doing full reassembly. */
1486 uses_wps_a = wpa_scan_get_vendor_ie(wa, WPS_IE_VENDOR_TYPE) != NULL;
1487 uses_wps_b = wpa_scan_get_vendor_ie(wb, WPS_IE_VENDOR_TYPE) != NULL;
1488 if (uses_wps_a && !uses_wps_b)
1490 if (!uses_wps_a && uses_wps_b)
1493 if (uses_wps_a && uses_wps_b) {
1494 wps_a = wpa_scan_get_vendor_ie_multi(wa, WPS_IE_VENDOR_TYPE);
1495 wps_b = wpa_scan_get_vendor_ie_multi(wb, WPS_IE_VENDOR_TYPE);
1496 res = wps_ap_priority_compar(wps_a, wps_b);
1504 * Do not use current AP security policy as a sorting criteria during
1505 * WPS provisioning step since the AP may get reconfigured at the
1506 * completion of provisioning.
1509 /* all things being equal, use signal level; if signal levels are
1510 * identical, use quality values since some drivers may only report
1511 * that value and leave the signal level zero */
1512 if (wb->level == wa->level)
1513 return wb->qual - wa->qual;
1514 return wb->level - wa->level;
1516 #endif /* CONFIG_WPS */
1519 static void dump_scan_res(struct wpa_scan_results *scan_res)
1521 #ifndef CONFIG_NO_STDOUT_DEBUG
1524 if (scan_res->res == NULL || scan_res->num == 0)
1527 wpa_printf(MSG_EXCESSIVE, "Sorted scan results");
1529 for (i = 0; i < scan_res->num; i++) {
1530 struct wpa_scan_res *r = scan_res->res[i];
1532 if ((r->flags & (WPA_SCAN_LEVEL_DBM | WPA_SCAN_NOISE_INVALID))
1533 == WPA_SCAN_LEVEL_DBM) {
1534 int snr = r->level - r->noise;
1535 wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
1536 "noise=%d level=%d snr=%d%s flags=0x%x "
1538 MAC2STR(r->bssid), r->freq, r->qual,
1539 r->noise, r->level, snr,
1540 snr >= GREAT_SNR ? "*" : "", r->flags,
1543 wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
1544 "noise=%d level=%d flags=0x%x age=%u",
1545 MAC2STR(r->bssid), r->freq, r->qual,
1546 r->noise, r->level, r->flags, r->age);
1548 pos = (u8 *) (r + 1);
1550 wpa_hexdump(MSG_EXCESSIVE, "IEs", pos, r->ie_len);
1552 if (r->beacon_ie_len)
1553 wpa_hexdump(MSG_EXCESSIVE, "Beacon IEs",
1554 pos, r->beacon_ie_len);
1556 #endif /* CONFIG_NO_STDOUT_DEBUG */
1561 * wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed
1562 * @wpa_s: Pointer to wpa_supplicant data
1563 * @bssid: BSSID to check
1564 * Returns: 0 if the BSSID is filtered or 1 if not
1566 * This function is used to filter out specific BSSIDs from scan reslts mainly
1567 * for testing purposes (SET bssid_filter ctrl_iface command).
1569 int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
1574 if (wpa_s->bssid_filter == NULL)
1577 for (i = 0; i < wpa_s->bssid_filter_count; i++) {
1578 if (os_memcmp(wpa_s->bssid_filter + i * ETH_ALEN, bssid,
1587 static void filter_scan_res(struct wpa_supplicant *wpa_s,
1588 struct wpa_scan_results *res)
1592 if (wpa_s->bssid_filter == NULL)
1595 for (i = 0, j = 0; i < res->num; i++) {
1596 if (wpa_supplicant_filter_bssid_match(wpa_s,
1597 res->res[i]->bssid)) {
1598 res->res[j++] = res->res[i];
1600 os_free(res->res[i]);
1605 if (res->num != j) {
1606 wpa_printf(MSG_DEBUG, "Filtered out %d scan results",
1607 (int) (res->num - j));
1614 * wpa_supplicant_get_scan_results - Get scan results
1615 * @wpa_s: Pointer to wpa_supplicant data
1616 * @info: Information about what was scanned or %NULL if not available
1617 * @new_scan: Whether a new scan was performed
1618 * Returns: Scan results, %NULL on failure
1620 * This function request the current scan results from the driver and updates
1621 * the local BSS list wpa_s->bss. The caller is responsible for freeing the
1622 * results with wpa_scan_results_free().
1624 struct wpa_scan_results *
1625 wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s,
1626 struct scan_info *info, int new_scan)
1628 struct wpa_scan_results *scan_res;
1630 int (*compar)(const void *, const void *) = wpa_scan_result_compar;
1632 scan_res = wpa_drv_get_scan_results2(wpa_s);
1633 if (scan_res == NULL) {
1634 wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results");
1637 if (scan_res->fetch_time.sec == 0) {
1639 * Make sure we have a valid timestamp if the driver wrapper
1640 * does not set this.
1642 os_get_reltime(&scan_res->fetch_time);
1644 filter_scan_res(wpa_s, scan_res);
1647 if (wpas_wps_searching(wpa_s)) {
1648 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Order scan results with WPS "
1649 "provisioning rules");
1650 compar = wpa_scan_result_wps_compar;
1652 #endif /* CONFIG_WPS */
1654 qsort(scan_res->res, scan_res->num, sizeof(struct wpa_scan_res *),
1656 dump_scan_res(scan_res);
1658 wpa_bss_update_start(wpa_s);
1659 for (i = 0; i < scan_res->num; i++)
1660 wpa_bss_update_scan_res(wpa_s, scan_res->res[i],
1661 &scan_res->fetch_time);
1662 wpa_bss_update_end(wpa_s, info, new_scan);
1669 * wpa_supplicant_update_scan_results - Update scan results from the driver
1670 * @wpa_s: Pointer to wpa_supplicant data
1671 * Returns: 0 on success, -1 on failure
1673 * This function updates the BSS table within wpa_supplicant based on the
1674 * currently available scan results from the driver without requesting a new
1675 * scan. This is used in cases where the driver indicates an association
1676 * (including roaming within ESS) and wpa_supplicant does not yet have the
1677 * needed information to complete the connection (e.g., to perform validation
1678 * steps in 4-way handshake).
1680 int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s)
1682 struct wpa_scan_results *scan_res;
1683 scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
1684 if (scan_res == NULL)
1686 wpa_scan_results_free(scan_res);
1693 * scan_only_handler - Reports scan results
1695 void scan_only_handler(struct wpa_supplicant *wpa_s,
1696 struct wpa_scan_results *scan_res)
1698 wpa_dbg(wpa_s, MSG_DEBUG, "Scan-only results received");
1699 if (wpa_s->last_scan_req == MANUAL_SCAN_REQ &&
1700 wpa_s->manual_scan_use_id && wpa_s->own_scan_running) {
1701 wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS "id=%u",
1702 wpa_s->manual_scan_id);
1703 wpa_s->manual_scan_use_id = 0;
1705 wpa_msg_ctrl(wpa_s, MSG_INFO, WPA_EVENT_SCAN_RESULTS);
1707 wpas_notify_scan_results(wpa_s);
1708 wpas_notify_scan_done(wpa_s, 1);
1709 if (wpa_s->scan_work) {
1710 struct wpa_radio_work *work = wpa_s->scan_work;
1711 wpa_s->scan_work = NULL;
1712 radio_work_done(work);
1717 int wpas_scan_scheduled(struct wpa_supplicant *wpa_s)
1719 return eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL);
1723 struct wpa_driver_scan_params *
1724 wpa_scan_clone_params(const struct wpa_driver_scan_params *src)
1726 struct wpa_driver_scan_params *params;
1730 params = os_zalloc(sizeof(*params));
1734 for (i = 0; i < src->num_ssids; i++) {
1735 if (src->ssids[i].ssid) {
1736 n = os_malloc(src->ssids[i].ssid_len);
1739 os_memcpy(n, src->ssids[i].ssid,
1740 src->ssids[i].ssid_len);
1741 params->ssids[i].ssid = n;
1742 params->ssids[i].ssid_len = src->ssids[i].ssid_len;
1745 params->num_ssids = src->num_ssids;
1747 if (src->extra_ies) {
1748 n = os_malloc(src->extra_ies_len);
1751 os_memcpy(n, src->extra_ies, src->extra_ies_len);
1752 params->extra_ies = n;
1753 params->extra_ies_len = src->extra_ies_len;
1757 int len = int_array_len(src->freqs);
1758 params->freqs = os_malloc((len + 1) * sizeof(int));
1759 if (params->freqs == NULL)
1761 os_memcpy(params->freqs, src->freqs, (len + 1) * sizeof(int));
1764 if (src->filter_ssids) {
1765 params->filter_ssids = os_malloc(sizeof(params->filter_ssids) *
1766 src->num_filter_ssids);
1767 if (params->filter_ssids == NULL)
1769 os_memcpy(params->filter_ssids, src->filter_ssids,
1770 sizeof(params->filter_ssids) * src->num_filter_ssids);
1771 params->num_filter_ssids = src->num_filter_ssids;
1774 params->filter_rssi = src->filter_rssi;
1775 params->p2p_probe = src->p2p_probe;
1776 params->only_new_results = src->only_new_results;
1781 wpa_scan_free_params(params);
1786 void wpa_scan_free_params(struct wpa_driver_scan_params *params)
1793 for (i = 0; i < params->num_ssids; i++)
1794 os_free((u8 *) params->ssids[i].ssid);
1795 os_free((u8 *) params->extra_ies);
1796 os_free(params->freqs);
1797 os_free(params->filter_ssids);