#define DEFAULT_USER_MPM 1
#define DEFAULT_MAX_PEER_LINKS 99
#define DEFAULT_MESH_MAX_INACTIVITY 300
+/*
+ * The default dot11RSNASAERetransPeriod is defined as 40 ms in the standard,
+ * but use 1000 ms in practice to avoid issues on low power CPUs.
+ */
+#define DEFAULT_DOT11_RSNA_SAE_RETRANS_PERIOD 1000
#define DEFAULT_FAST_REAUTH 1
#define DEFAULT_P2P_GO_INTENT 7
#define DEFAULT_P2P_INTRA_BSS 1
#define DEFAULT_KEY_MGMT_OFFLOAD 1
#define DEFAULT_CERT_IN_CB 1
#define DEFAULT_P2P_GO_CTWINDOW 0
+#define DEFAULT_WPA_RSC_RELAXATION 1
+#define DEFAULT_MBO_CELL_CAPA MBO_CELL_CAPA_NOT_SUPPORTED
#include "config_ssid.h"
#include "wps/wps.h"
#define CFG_CHANGED_EXT_PW_BACKEND BIT(14)
#define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15)
#define CFG_CHANGED_P2P_PASSPHRASE_LEN BIT(16)
+#define CFG_CHANGED_SCHED_SCAN_PLANS BIT(17)
/**
* struct wpa_config - wpa_supplicant configuration data
* one by one until the driver reports successful association; each
* network block should have explicit security policy (i.e., only one
* option in the lists) for key_mgmt, pairwise, group, proto variables.
+ *
+ * Note: ap_scan=2 should not be used with the nl80211 driver interface
+ * (the current Linux interface). ap_scan=1 is optimized work working
+ * with nl80211. For finding networks using hidden SSID, scan_ssid=1 in
+ * the network block can be used with nl80211.
*/
int ap_scan;
int p2p_group_idle;
/**
+ * p2p_go_freq_change_policy - The GO frequency change policy
+ *
+ * This controls the behavior of the GO when there is a change in the
+ * map of the currently used frequencies in case more than one channel
+ * is supported.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM: Prefer working in a single channel mode if
+ * possible. In case the GO is the only interface using its frequency
+ * and there are other station interfaces on other frequencies, the GO
+ * will migrate to one of these frequencies.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS: Same as P2P_GO_FREQ_MOVE_SCM,
+ * but a transition is possible only in case one of the other used
+ * frequencies is one of the frequencies in the intersection of the
+ * frequency list of the local device and the peer device.
+ *
+ * @P2P_GO_FREQ_MOVE_STAY: Prefer to stay on the current frequency.
+ *
+ * @P2P_GO_FREQ_MOVE_SCM_ECSA: Same as
+ * P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS but a transition is possible only
+ * if all the group members advertise eCSA support.
+ */
+ enum {
+ P2P_GO_FREQ_MOVE_SCM = 0,
+ P2P_GO_FREQ_MOVE_SCM_PEER_SUPPORTS = 1,
+ P2P_GO_FREQ_MOVE_STAY = 2,
+ P2P_GO_FREQ_MOVE_SCM_ECSA = 3,
+ P2P_GO_FREQ_MOVE_MAX = P2P_GO_FREQ_MOVE_SCM_ECSA,
+ } p2p_go_freq_change_policy;
+
+#define DEFAULT_P2P_GO_FREQ_MOVE P2P_GO_FREQ_MOVE_STAY
+
+ /**
* p2p_passphrase_len - Passphrase length (8..63) for P2P GO
*
* This parameter controls the length of the random passphrase that is
*
* By default, PMF is disabled unless enabled by the per-network
* ieee80211w=1 or ieee80211w=2 parameter. pmf=1/2 can be used to change
- * this default behavior.
+ * this default behavior for RSN network (this is not applicable for
+ * non-RSN cases).
*/
enum mfp_options pmf;
int mesh_max_inactivity;
/**
+ * dot11RSNASAERetransPeriod - Timeout to retransmit SAE Auth frame
+ *
+ * This timeout value is used in mesh STA to retransmit
+ * SAE Authentication frame.
+ * By default: 1000 milliseconds.
+ */
+ int dot11RSNASAERetransPeriod;
+
+ /**
* passive_scan - Whether to force passive scan for network connection
*
* This parameter can be used to force only passive scanning to be used
* interface.
*/
int fst_llt;
+
+ /**
+ * wpa_rsc_relaxation - RSC relaxation on GTK installation
+ *
+ * Values:
+ * 0 - use the EAPOL-Key RSC value on GTK installation
+ * 1 - use the null RSC if a bogus RSC value is detected in message 3
+ * of 4-Way Handshake or message 1 of Group Key Handshake.
+ */
+ int wpa_rsc_relaxation;
+
+ /**
+ * sched_scan_plans - Scan plans for scheduled scan
+ *
+ * Each scan plan specifies the interval between scans and the number of
+ * iterations. The last scan plan only specifies the scan interval and
+ * will be run infinitely.
+ *
+ * format: <interval:iterations> <interval2:iterations2> ... <interval>
+ */
+ char *sched_scan_plans;
+
+#ifdef CONFIG_MBO
+ /**
+ * non_pref_chan - Non-preferred channels list, separated by spaces.
+ *
+ * format: op_class:chan:preference:reason<:detail>
+ * Detail is optional.
+ */
+ char *non_pref_chan;
+
+ /**
+ * mbo_cell_capa - Cellular capabilities for MBO
+ */
+ enum mbo_cellular_capa mbo_cell_capa;
+#endif /* CONFIG_MBO */
+
+ /**
+ * gas_address3 - GAS Address3 field behavior
+ *
+ * Values:
+ * 0 - P2P specification (Address3 = AP BSSID)
+ * 1 = IEEE 802.11 standard compliant (Address3 = Wildcard BSSID when
+ * sent to not-associated AP; if associated, AP BSSID)
+ */
+ int gas_address3;
};
/* Prototypes for common functions from config.c */
int wpa_config_process_global(struct wpa_config *config, char *pos, int line);
+int wpa_config_get_num_global_field_names(void);
+
+const char * wpa_config_get_global_field_name(unsigned int i, int *no_var);
/* Prototypes for backend specific functions from the selected config_*.c */