IBSS/mesh: Add support for VHT80P80 configuration

A new network profile configuration parameter max_oper_chwidth=3 can be
used to specify preference to enable 80+80 MHz VHT channel for IBSS. If
that is set, the first 80 MHz segment is specified based on the
frequency parameter in the network profile and the second segment is
selected automatically (which will practically be limited to a single
possibility due to DFS requirements in most countries).

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>

diff --git a/wpa_supplicant/config.c b/wpa_supplicant/config.c
index 3bda77c..bdcfe9f 100644 (file)
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -1845,6 +1845,8 @@ static const struct parse_data ssid_fields[] = {
        { FUNC(auth_alg) },
        { FUNC(scan_freq) },
        { FUNC(freq_list) },
+       { INT_RANGE(max_oper_chwidth, VHT_CHANWIDTH_USE_HT,
+                   VHT_CHANWIDTH_80P80MHZ) },
 #ifdef IEEE8021X_EAPOL
        { FUNC(eap) },
        { STR_LENe(identity) },

diff --git a/wpa_supplicant/config_file.c b/wpa_supplicant/config_file.c
index 215388c..be72157 100644 (file)
--- a/wpa_supplicant/config_file.c
+++ b/wpa_supplicant/config_file.c
@@ -751,6 +751,7 @@ static void wpa_config_write_network(FILE *f, struct wpa_ssid *ssid)
        INT(disabled);
        INT(peerkey);
        INT(mixed_cell);
+       INT(max_oper_chwidth);
 #ifdef CONFIG_IEEE80211W
        write_int(f, "ieee80211w", ssid->ieee80211w,
                  MGMT_FRAME_PROTECTION_DEFAULT);

diff --git a/wpa_supplicant/wpa_cli.c b/wpa_supplicant/wpa_cli.c
index add7ea0..37d4ff4 100644 (file)
--- a/wpa_supplicant/wpa_cli.c
+++ b/wpa_supplicant/wpa_cli.c
@@ -1554,7 +1554,7 @@ static const char *network_fields[] = {
        "ssid", "scan_ssid", "bssid", "bssid_blacklist",
        "bssid_whitelist", "psk", "proto", "key_mgmt",
        "bg_scan_period", "pairwise", "group", "auth_alg", "scan_freq",
-       "freq_list",
+       "freq_list", "max_oper_chwidth",
 #ifdef IEEE8021X_EAPOL
        "eap", "identity", "anonymous_identity", "password", "ca_cert",
        "ca_path", "client_cert", "private_key", "private_key_passwd",

diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 879cc6f..920c281 100644 (file)
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -1769,8 +1769,10 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
        struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
        u8 channel;
        int i, chan_idx, ht40 = -1, res, obss_scan = 1;
-       unsigned int j;
+       unsigned int j, k;
        struct hostapd_freq_params vht_freq;
+       int chwidth, seg0, seg1;
+       u32 vht_caps = 0;
 
        freq->freq = ssid->frequency;
 
@@ -1956,12 +1958,45 @@ void ibss_mesh_setup_freq(struct wpa_supplicant *wpa_s,
                        return;
        }
 
+       chwidth = VHT_CHANWIDTH_80MHZ;
+       seg0 = vht80[j] + 6;
+       seg1 = 0;
+
+       if (ssid->max_oper_chwidth == VHT_CHANWIDTH_80P80MHZ) {
+               /* setup center_freq2, bandwidth */
+               for (k = 0; k < ARRAY_SIZE(vht80); k++) {
+                       /* Only accept 80 MHz segments separated by a gap */
+                       if (j == k || abs(vht80[j] - vht80[k]) == 16)
+                               continue;
+                       for (i = vht80[k]; i < vht80[k] + 16; i += 4) {
+                               struct hostapd_channel_data *chan;
+
+                               chan = hw_get_channel_chan(mode, i, NULL);
+                               if (!chan)
+                                       continue;
+
+                               if (chan->flag & (HOSTAPD_CHAN_DISABLED |
+                                                 HOSTAPD_CHAN_NO_IR |
+                                                 HOSTAPD_CHAN_RADAR))
+                                       continue;
+
+                               /* Found a suitable second segment for 80+80 */
+                               chwidth = VHT_CHANWIDTH_80P80MHZ;
+                               vht_caps |=
+                                       VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
+                               seg1 = vht80[k] + 6;
+                       }
+
+                       if (chwidth == VHT_CHANWIDTH_80P80MHZ)
+                               break;
+               }
+       }
+
        if (hostapd_set_freq_params(&vht_freq, mode->mode, freq->freq,
                                    freq->channel, freq->ht_enabled,
                                    vht_freq.vht_enabled,
                                    freq->sec_channel_offset,
-                                   VHT_CHANWIDTH_80MHZ,
-                                   vht80[j] + 6, 0, 0) != 0)
+                                   chwidth, seg0, seg1, vht_caps) != 0)
                return;
 
        *freq = vht_freq;