#define HOSTAPD_CHAN_INDOOR_ONLY 0x00010000
#define HOSTAPD_CHAN_GO_CONCURRENT 0x00020000
+/**
+ * enum reg_change_initiator - Regulatory change initiator
+ */
enum reg_change_initiator {
REGDOM_SET_BY_CORE,
REGDOM_SET_BY_USER,
REGDOM_BEACON_HINT,
};
+/**
+ * enum reg_type - Regulatory change types
+ */
enum reg_type {
REGDOM_TYPE_UNKNOWN,
REGDOM_TYPE_COUNTRY,
*/
u8 max_tx_power;
- /*
- * survey_list - Linked list of surveys
+ /**
+ * survey_list - Linked list of surveys (struct freq_survey)
*/
struct dl_list survey_list;
long double interference_factor;
#endif /* CONFIG_ACS */
- /* DFS CAC time in milliseconds */
+ /**
+ * dfs_cac_ms - DFS CAC time in milliseconds
+ */
unsigned int dfs_cac_ms;
};
* constructed of the IEs that are available. This field will also need to
* include SSID in IE format. All drivers are encouraged to be extended to
* report all IEs to make it easier to support future additions.
+ *
+ * This structure data is followed by ie_len octets of IEs from Probe Response
+ * frame (or if the driver does not indicate source of IEs, these may also be
+ * from Beacon frame). After the first set of IEs, another set of IEs may follow
+ * (with beacon_ie_len octets of data) if the driver provides both IE sets.
*/
struct wpa_scan_res {
unsigned int flags;
unsigned int age;
size_t ie_len;
size_t beacon_ie_len;
- /*
- * Followed by ie_len octets of IEs from Probe Response frame (or if
- * the driver does not indicate source of IEs, these may also be from
- * Beacon frame). After the first set of IEs, another set of IEs may
- * follow (with beacon_ie_len octets of data) if the driver provides
- * both IE sets.
- */
+ /* Followed by ie_len + beacon_ie_len octets of IE data */
};
/**
*/
int p2p;
+ /**
+ * sae_data - SAE elements for Authentication frame
+ *
+ * This buffer starts with the Authentication transaction sequence
+ * number field. If SAE is not used, this pointer is %NULL.
+ */
const u8 *sae_data;
- size_t sae_data_len;
+ /**
+ * sae_data_len - Length of sae_data buffer in octets
+ */
+ size_t sae_data_len;
};
+/**
+ * enum wps_mode - WPS mode
+ */
enum wps_mode {
- WPS_MODE_NONE /* no WPS provisioning being used */,
- WPS_MODE_OPEN /* WPS provisioning with AP that is in open mode */,
- WPS_MODE_PRIVACY /* WPS provisioning with AP that is using protection
- */
+ /**
+ * WPS_MODE_NONE - No WPS provisioning being used
+ */
+ WPS_MODE_NONE,
+
+ /**
+ * WPS_MODE_OPEN - WPS provisioning with AP that is in open mode
+ */
+ WPS_MODE_OPEN,
+
+ /**
+ * WPS_MODE_PRIVACY - WPS provisioning with AP that is using protection
+ */
+ WPS_MODE_PRIVACY
};
+/**
+ * struct hostapd_freq_params - Channel parameters
+ */
struct hostapd_freq_params {
- int mode;
+ /**
+ * mode - Mode/band (HOSTAPD_MODE_IEEE80211A, ..)
+ */
+ enum hostapd_hw_mode mode;
+
+ /**
+ * freq - Primary channel center frequency in MHz
+ */
int freq;
+
+ /**
+ * channel - Channel number
+ */
int channel;
- /* for HT */
+
+ /**
+ * ht_enabled - Whether HT is enabled
+ */
int ht_enabled;
- int sec_channel_offset; /* 0 = HT40 disabled, -1 = HT40 enabled,
- * secondary channel below primary, 1 = HT40
- * enabled, secondary channel above primary */
- /* for VHT */
+ /**
+ * sec_channel_offset - Secondary channel offset for HT40
+ *
+ * 0 = HT40 disabled,
+ * -1 = HT40 enabled, secondary channel below primary,
+ * 1 = HT40 enabled, secondary channel above primary
+ */
+ int sec_channel_offset;
+
+ /**
+ * vht_enabled - Whether VHT is enabled
+ */
int vht_enabled;
- /* valid for both HT and VHT, center_freq2 is non-zero
- * only for bandwidth 80 and an 80+80 channel */
- int center_freq1, center_freq2;
+ /**
+ * center_freq1 - Segment 0 center frequency in MHz
+ *
+ * Valid for both HT and VHT.
+ */
+ int center_freq1;
+
+ /**
+ * center_freq2 - Segment 1 center frequency in MHz
+ *
+ * Non-zero only for bandwidth 80 and an 80+80 channel
+ */
+ int center_freq2;
+
+ /**
+ * bandwidth - Channel bandwidth in MHz (20, 40, 80, 160)
+ */
int bandwidth;
};
int disable_ht;
/**
- * HT Capabilities over-rides. Only bits set in the mask will be used,
- * and not all values are used by the kernel anyway. Currently, MCS,
- * MPDU and MSDU fields are used.
+ * htcaps - HT Capabilities over-rides
+ *
+ * Only bits set in the mask will be used, and not all values are used
+ * by the kernel anyway. Currently, MCS, MPDU and MSDU fields are used.
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
+ */
+ const u8 *htcaps;
+
+ /**
+ * htcaps_mask - HT Capabilities over-rides mask
+ *
+ * Pointer to struct ieee80211_ht_capabilities.
*/
- const u8 *htcaps; /* struct ieee80211_ht_capabilities * */
- const u8 *htcaps_mask; /* struct ieee80211_ht_capabilities * */
+ const u8 *htcaps_mask;
#ifdef CONFIG_VHT_OVERRIDES
/**
#define WPA_DRIVER_CAPA_KEY_MGMT_FT 0x00000020
#define WPA_DRIVER_CAPA_KEY_MGMT_FT_PSK 0x00000040
#define WPA_DRIVER_CAPA_KEY_MGMT_WAPI_PSK 0x00000080
+ /** Bitfield of supported key management suites */
unsigned int key_mgmt;
#define WPA_DRIVER_CAPA_ENC_WEP40 0x00000001
#define WPA_DRIVER_CAPA_ENC_BIP_GMAC_256 0x00000400
#define WPA_DRIVER_CAPA_ENC_BIP_CMAC_256 0x00000800
#define WPA_DRIVER_CAPA_ENC_GTK_NOT_USED 0x00001000
+ /** Bitfield of supported cipher suites */
unsigned int enc;
#define WPA_DRIVER_AUTH_OPEN 0x00000001
#define WPA_DRIVER_AUTH_SHARED 0x00000002
#define WPA_DRIVER_AUTH_LEAP 0x00000004
+ /** Bitfield of supported IEEE 802.11 authentication algorithms */
unsigned int auth;
-/* Driver generated WPA/RSN IE */
+/** Driver generated WPA/RSN IE */
#define WPA_DRIVER_FLAGS_DRIVER_IE 0x00000001
-/* Driver needs static WEP key setup after association command */
+/** Driver needs static WEP key setup after association command */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC 0x00000002
-/* Driver takes care of all DFS operations */
+/** Driver takes care of all DFS operations */
#define WPA_DRIVER_FLAGS_DFS_OFFLOAD 0x00000004
-/* Driver takes care of RSN 4-way handshake internally; PMK is configured with
+/** Driver takes care of RSN 4-way handshake internally; PMK is configured with
* struct wpa_driver_ops::set_key using alg = WPA_ALG_PMK */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE 0x00000008
+/** Driver is for a wired Ethernet interface */
#define WPA_DRIVER_FLAGS_WIRED 0x00000010
-/* Driver provides separate commands for authentication and association (SME in
+/** Driver provides separate commands for authentication and association (SME in
* wpa_supplicant). */
#define WPA_DRIVER_FLAGS_SME 0x00000020
-/* Driver supports AP mode */
+/** Driver supports AP mode */
#define WPA_DRIVER_FLAGS_AP 0x00000040
-/* Driver needs static WEP key setup after association has been completed */
+/** Driver needs static WEP key setup after association has been completed */
#define WPA_DRIVER_FLAGS_SET_KEYS_AFTER_ASSOC_DONE 0x00000080
-/* Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
+/** Driver supports dynamic HT 20/40 MHz channel changes during BSS lifetime */
#define WPA_DRIVER_FLAGS_HT_2040_COEX 0x00000100
-/* Driver supports concurrent P2P operations */
+/** Driver supports concurrent P2P operations */
#define WPA_DRIVER_FLAGS_P2P_CONCURRENT 0x00000200
-/*
+/**
* Driver uses the initial interface as a dedicated management interface, i.e.,
* it cannot be used for P2P group operations or non-P2P purposes.
*/
#define WPA_DRIVER_FLAGS_P2P_DEDICATED_INTERFACE 0x00000400
-/* This interface is P2P capable (P2P GO or P2P Client) */
+/** This interface is P2P capable (P2P GO or P2P Client) */
#define WPA_DRIVER_FLAGS_P2P_CAPABLE 0x00000800
-/* Driver supports station and key removal when stopping an AP */
+/** Driver supports station and key removal when stopping an AP */
#define WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT 0x00001000
-/*
+/**
* Driver uses the initial interface for P2P management interface and non-P2P
* purposes (e.g., connect to infra AP), but this interface cannot be used for
* P2P group operations.
*/
#define WPA_DRIVER_FLAGS_P2P_MGMT_AND_NON_P2P 0x00002000
-/*
+/**
* Driver is known to use sane error codes, i.e., when it indicates that
* something (e.g., association) fails, there was indeed a failure and the
* operation does not end up getting completed successfully later.
*/
#define WPA_DRIVER_FLAGS_SANE_ERROR_CODES 0x00004000
-/* Driver supports off-channel TX */
+/** Driver supports off-channel TX */
#define WPA_DRIVER_FLAGS_OFFCHANNEL_TX 0x00008000
-/* Driver indicates TX status events for EAPOL Data frames */
+/** Driver indicates TX status events for EAPOL Data frames */
#define WPA_DRIVER_FLAGS_EAPOL_TX_STATUS 0x00010000
-/* Driver indicates TX status events for Deauth/Disassoc frames */
+/** Driver indicates TX status events for Deauth/Disassoc frames */
#define WPA_DRIVER_FLAGS_DEAUTH_TX_STATUS 0x00020000
-/* Driver supports roaming (BSS selection) in firmware */
+/** Driver supports roaming (BSS selection) in firmware */
#define WPA_DRIVER_FLAGS_BSS_SELECTION 0x00040000
-/* Driver supports operating as a TDLS peer */
+/** Driver supports operating as a TDLS peer */
#define WPA_DRIVER_FLAGS_TDLS_SUPPORT 0x00080000
-/* Driver requires external TDLS setup/teardown/discovery */
+/** Driver requires external TDLS setup/teardown/discovery */
#define WPA_DRIVER_FLAGS_TDLS_EXTERNAL_SETUP 0x00100000
-/* Driver indicates support for Probe Response offloading in AP mode */
+/** Driver indicates support for Probe Response offloading in AP mode */
#define WPA_DRIVER_FLAGS_PROBE_RESP_OFFLOAD 0x00200000
-/* Driver supports U-APSD in AP mode */
+/** Driver supports U-APSD in AP mode */
#define WPA_DRIVER_FLAGS_AP_UAPSD 0x00400000
-/* Driver supports inactivity timer in AP mode */
+/** Driver supports inactivity timer in AP mode */
#define WPA_DRIVER_FLAGS_INACTIVITY_TIMER 0x00800000
-/* Driver expects user space implementation of MLME in AP mode */
+/** Driver expects user space implementation of MLME in AP mode */
#define WPA_DRIVER_FLAGS_AP_MLME 0x01000000
-/* Driver supports SAE with user space SME */
+/** Driver supports SAE with user space SME */
#define WPA_DRIVER_FLAGS_SAE 0x02000000
-/* Driver makes use of OBSS scan mechanism in wpa_supplicant */
+/** Driver makes use of OBSS scan mechanism in wpa_supplicant */
#define WPA_DRIVER_FLAGS_OBSS_SCAN 0x04000000
-/* Driver supports IBSS (Ad-hoc) mode */
+/** Driver supports IBSS (Ad-hoc) mode */
#define WPA_DRIVER_FLAGS_IBSS 0x08000000
-/* Driver supports radar detection */
+/** Driver supports radar detection */
#define WPA_DRIVER_FLAGS_RADAR 0x10000000
-/* Driver supports a dedicated interface for P2P Device */
+/** Driver supports a dedicated interface for P2P Device */
#define WPA_DRIVER_FLAGS_DEDICATED_P2P_DEVICE 0x20000000
-/* Driver supports QoS Mapping */
+/** Driver supports QoS Mapping */
#define WPA_DRIVER_FLAGS_QOS_MAPPING 0x40000000
-/* Driver supports CSA in AP mode */
+/** Driver supports CSA in AP mode */
#define WPA_DRIVER_FLAGS_AP_CSA 0x80000000
-/* Driver supports mesh */
+/** Driver supports mesh */
#define WPA_DRIVER_FLAGS_MESH 0x0000000100000000ULL
-/* Driver support ACS offload */
+/** Driver support ACS offload */
#define WPA_DRIVER_FLAGS_ACS_OFFLOAD 0x0000000200000000ULL
-/* Driver supports key management offload */
+/** Driver supports key management offload */
#define WPA_DRIVER_FLAGS_KEY_MGMT_OFFLOAD 0x0000000400000000ULL
u64 flags;
unsigned int wmm_ac_supported:1;
+ /** Maximum number of supported active probe SSIDs */
int max_scan_ssids;
+
+ /** Maximum number of supported active probe SSIDs for sched_scan */
int max_sched_scan_ssids;
+
+ /** Whether sched_scan (offloaded scanning) is supported */
int sched_scan_supported;
+
+ /** Maximum number of supported match sets for sched_scan */
int max_match_sets;
/**
* probe_resp_offloads - Bitmap of supported protocols by the driver
* for Probe Response offloading.
*/
-/* Driver Probe Response offloading support for WPS ver. 1 */
+/** Driver Probe Response offloading support for WPS ver. 1 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS 0x00000001
-/* Driver Probe Response offloading support for WPS ver. 2 */
+/** Driver Probe Response offloading support for WPS ver. 2 */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_WPS2 0x00000002
-/* Driver Probe Response offloading support for P2P */
+/** Driver Probe Response offloading support for P2P */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_P2P 0x00000004
-/* Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
+/** Driver Probe Response offloading support for IEEE 802.11u (Interworking) */
#define WPA_DRIVER_PROBE_RESP_OFFLOAD_INTERWORKING 0x00000008
unsigned int probe_resp_offloads;
struct wowlan_triggers wowlan_triggers;
-/* Driver adds the DS Params Set IE in Probe Request frames */
+/** Driver adds the DS Params Set IE in Probe Request frames */
#define WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES 0x00000001
-/* Driver adds the WFA TPC IE in Probe Request frames */
+/** Driver adds the WFA TPC IE in Probe Request frames */
#define WPA_DRIVER_FLAGS_WFA_TPC_IE_IN_PROBES 0x00000002
-/* Driver handles quiet period requests */
+/** Driver handles quiet period requests */
#define WPA_DRIVER_FLAGS_QUIET 0x00000004
/**
* Driver is capable of inserting the current TX power value into the body of
* survey_results - Survey result data for EVENT_SURVEY
* @freq_filter: Requested frequency survey filter, 0 if request
* was for all survey data
- * @survey_list: Linked list of survey data
+ * @survey_list: Linked list of survey data (struct freq_survey)
*/
struct survey_results {
unsigned int freq_filter;
projects / mech_eap.git / commitdiff