Fix hostapd.conf description of HT40+

Signed-off-by: Jouni Malinen <j@w1.fi>

diff --git a/hostapd/hostapd.conf b/hostapd/hostapd.conf
index 23ee1e5..a486d8c 100644 (file)
--- a/hostapd/hostapd.conf
+++ b/hostapd/hostapd.conf
@@ -453,7 +453,7 @@ wmm_ac_vo_acm=0
 # LDPC coding capability: [LDPC] = supported
 # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
 #      channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
-#      with secondary channel below the primary channel
+#      with secondary channel above the primary channel
 #      (20 MHz only if neither is set)
 #      Note: There are limits on which channels can be used with HT40- and
 #      HT40+. Following table shows the channels that may be available for