Select AP based on estimated maximum throughput

This modifies the BSS selection routines to calculate SNR and estimated
throughput for each scan result and then use the estimated throughput as
a criteria for sorting the results. This extends the earlier design by
taking into account higher throughput rates if both the AP and local
device supports HT20, HT40, or VHT80. In addition, the maximum rate is
restricted based on SNR.

In practice, this gives significantly higher probability of selecting
HT/VHT APs when there are multiple BSSes in the same ESS and SNR is not
low enough to prevent higher MCS use.

Signed-off-by: Jouni Malinen <j@w1.fi>

diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 2c21fdb..d35309a 100644 (file)
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -213,6 +213,9 @@ struct hostapd_hw_modes {
  * @tsf: Timestamp
  * @age: Age of the information in milliseconds (i.e., how many milliseconds
  * ago the last Beacon or Probe Response frame was received)
+ * @est_throughput: Estimated throughput in kbps (this is calculated during
+ * scan result processing if left zero by the driver wrapper)
+ * @snr: Signal-to-noise ratio in dB (calculated during scan result processing)
  * @ie_len: length of the following IE field in octets
  * @beacon_ie_len: length of the following Beacon IE field in octets
  *
@@ -241,6 +244,8 @@ struct wpa_scan_res {
        int level;
        u64 tsf;
        unsigned int age;
+       unsigned int est_throughput;
+       int snr;
        size_t ie_len;
        size_t beacon_ie_len;
        /* Followed by ie_len + beacon_ie_len octets of IE data */

diff --git a/wpa_supplicant/scan.c b/wpa_supplicant/scan.c
index 10d6c0e..30a6657 100644 (file)
--- a/wpa_supplicant/scan.c
+++ b/wpa_supplicant/scan.c
@@ -1605,8 +1605,8 @@ static int wpa_scan_result_compar(const void *a, const void *b)
        struct wpa_scan_res **_wb = (void *) b;
        struct wpa_scan_res *wa = *_wa;
        struct wpa_scan_res *wb = *_wb;
-       int wpa_a, wpa_b, maxrate_a, maxrate_b;
-       int snr_a, snr_b;
+       int wpa_a, wpa_b;
+       int snr_a, snr_b, snr_a_full, snr_b_full;
 
        /* WPA/WPA2 support preferred */
        wpa_a = wpa_scan_get_vendor_ie(wa, WPA_IE_VENDOR_TYPE) != NULL ||
@@ -1628,22 +1628,22 @@ static int wpa_scan_result_compar(const void *a, const void *b)
                return -1;
 
        if (wa->flags & wb->flags & WPA_SCAN_LEVEL_DBM) {
-               snr_a = MIN(wa->level - wa->noise, GREAT_SNR);
-               snr_b = MIN(wb->level - wb->noise, GREAT_SNR);
+               snr_a_full = wa->snr;
+               snr_a = MIN(wa->snr, GREAT_SNR);
+               snr_b_full = wb->snr;
+               snr_b = MIN(wa->snr, GREAT_SNR);
        } else {
                /* Level is not in dBm, so we can't calculate
                 * SNR. Just use raw level (units unknown). */
-               snr_a = wa->level;
-               snr_b = wb->level;
+               snr_a = snr_a_full = wa->level;
+               snr_b = snr_b_full = wb->level;
        }
 
        /* if SNR is close, decide by max rate or frequency band */
        if ((snr_a && snr_b && abs(snr_b - snr_a) < 5) ||
            (wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) {
-               maxrate_a = wpa_scan_get_max_rate(wa);
-               maxrate_b = wpa_scan_get_max_rate(wb);
-               if (maxrate_a != maxrate_b)
-                       return maxrate_b - maxrate_a;
+               if (wa->est_throughput != wb->est_throughput)
+                       return wb->est_throughput - wa->est_throughput;
                if (IS_5GHZ(wa->freq) ^ IS_5GHZ(wb->freq))
                        return IS_5GHZ(wa->freq) ? -1 : 1;
        }
@@ -1651,9 +1651,9 @@ static int wpa_scan_result_compar(const void *a, const void *b)
        /* all things being equal, use SNR; if SNRs are
         * identical, use quality values since some drivers may only report
         * that value and leave the signal level zero */
-       if (snr_b == snr_a)
+       if (snr_b_full == snr_a_full)
                return wb->qual - wa->qual;
-       return snr_b - snr_a;
+       return snr_b_full - snr_a_full;
 #undef MIN
 }
 
@@ -1720,20 +1720,21 @@ static void dump_scan_res(struct wpa_scan_results *scan_res)
                struct wpa_scan_res *r = scan_res->res[i];
                u8 *pos;
                if (r->flags & WPA_SCAN_LEVEL_DBM) {
-                       int snr = r->level - r->noise;
                        int noise_valid = !(r->flags & WPA_SCAN_NOISE_INVALID);
 
                        wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
-                                  "noise=%d%s level=%d snr=%d%s flags=0x%x age=%u",
+                                  "noise=%d%s level=%d snr=%d%s flags=0x%x age=%u est=%u",
                                   MAC2STR(r->bssid), r->freq, r->qual,
                                   r->noise, noise_valid ? "" : "~", r->level,
-                                  snr, snr >= GREAT_SNR ? "*" : "", r->flags,
-                                  r->age);
+                                  r->snr, r->snr >= GREAT_SNR ? "*" : "",
+                                  r->flags,
+                                  r->age, r->est_throughput);
                } else {
                        wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
-                                  "noise=%d level=%d flags=0x%x age=%u",
+                                  "noise=%d level=%d flags=0x%x age=%u est=%u",
                                   MAC2STR(r->bssid), r->freq, r->qual,
-                                  r->noise, r->level, r->flags, r->age);
+                                  r->noise, r->level, r->flags, r->age,
+                                  r->est_throughput);
                }
                pos = (u8 *) (r + 1);
                if (r->ie_len)
@@ -1808,6 +1809,180 @@ static void filter_scan_res(struct wpa_supplicant *wpa_s,
 #define DEFAULT_NOISE_FLOOR_2GHZ (-89)
 #define DEFAULT_NOISE_FLOOR_5GHZ (-92)
 
+static void scan_snr(struct wpa_scan_res *res)
+{
+       if (res->flags & WPA_SCAN_NOISE_INVALID) {
+               res->noise = IS_5GHZ(res->freq) ?
+                       DEFAULT_NOISE_FLOOR_5GHZ :
+                       DEFAULT_NOISE_FLOOR_2GHZ;
+       }
+
+       if (res->flags & WPA_SCAN_LEVEL_DBM) {
+               res->snr = res->level - res->noise;
+       } else {
+               /* Level is not in dBm, so we can't calculate
+                * SNR. Just use raw level (units unknown). */
+               res->snr = res->level;
+       }
+}
+
+
+static unsigned int max_ht20_rate(int snr)
+{
+       if (snr < 6)
+               return 6500; /* HT20 MCS0 */
+       if (snr < 8)
+               return 13000; /* HT20 MCS1 */
+       if (snr < 13)
+               return 19500; /* HT20 MCS2 */
+       if (snr < 17)
+               return 26000; /* HT20 MCS3 */
+       if (snr < 20)
+               return 39000; /* HT20 MCS4 */
+       if (snr < 23)
+               return 52000; /* HT20 MCS5 */
+       if (snr < 24)
+               return 58500; /* HT20 MCS6 */
+       return 65000; /* HT20 MCS7 */
+}
+
+
+static unsigned int max_ht40_rate(int snr)
+{
+       if (snr < 3)
+               return 13500; /* HT40 MCS0 */
+       if (snr < 6)
+               return 27000; /* HT40 MCS1 */
+       if (snr < 10)
+               return 40500; /* HT40 MCS2 */
+       if (snr < 15)
+               return 54000; /* HT40 MCS3 */
+       if (snr < 17)
+               return 81000; /* HT40 MCS4 */
+       if (snr < 22)
+               return 108000; /* HT40 MCS5 */
+       if (snr < 22)
+               return 121500; /* HT40 MCS6 */
+       return 135000; /* HT40 MCS7 */
+}
+
+
+static unsigned int max_vht80_rate(int snr)
+{
+       if (snr < 1)
+               return 0;
+       if (snr < 2)
+               return 29300; /* VHT80 MCS0 */
+       if (snr < 5)
+               return 58500; /* VHT80 MCS1 */
+       if (snr < 9)
+               return 87800; /* VHT80 MCS2 */
+       if (snr < 11)
+               return 117000; /* VHT80 MCS3 */
+       if (snr < 15)
+               return 175500; /* VHT80 MCS4 */
+       if (snr < 16)
+               return 234000; /* VHT80 MCS5 */
+       if (snr < 18)
+               return 263300; /* VHT80 MCS6 */
+       if (snr < 20)
+               return 292500; /* VHT80 MCS7 */
+       if (snr < 22)
+               return 351000; /* VHT80 MCS8 */
+       return 390000; /* VHT80 MCS9 */
+}
+
+
+static void scan_est_throughput(struct wpa_supplicant *wpa_s,
+                               struct wpa_scan_res *res)
+{
+       enum local_hw_capab capab = wpa_s->hw_capab;
+       int rate; /* max legacy rate in 500 kb/s units */
+       const u8 *ie;
+       unsigned int est, tmp;
+       int snr = res->snr;
+
+       if (res->est_throughput)
+               return;
+
+       /* Get maximum legacy rate */
+       rate = wpa_scan_get_max_rate(res);
+
+       /* Limit based on estimated SNR */
+       if (rate > 1 * 2 && snr < 1)
+               rate = 1 * 2;
+       else if (rate > 2 * 2 && snr < 4)
+               rate = 2 * 2;
+       else if (rate > 6 * 2 && snr < 5)
+               rate = 6 * 2;
+       else if (rate > 9 * 2 && snr < 6)
+               rate = 9 * 2;
+       else if (rate > 12 * 2 && snr < 7)
+               rate = 12 * 2;
+       else if (rate > 18 * 2 && snr < 10)
+               rate = 18 * 2;
+       else if (rate > 24 * 2 && snr < 11)
+               rate = 24 * 2;
+       else if (rate > 36 * 2 && snr < 15)
+               rate = 36 * 2;
+       else if (rate > 48 * 2 && snr < 19)
+               rate = 48 * 2;
+       else if (rate > 54 * 2 && snr < 21)
+               rate = 54 * 2;
+       est = rate * 500;
+
+       if (capab == CAPAB_HT || capab == CAPAB_HT40 || capab == CAPAB_VHT) {
+               ie = wpa_scan_get_ie(res, WLAN_EID_HT_CAP);
+               if (ie) {
+                       tmp = max_ht20_rate(snr);
+                       if (tmp > est)
+                               est = tmp;
+               }
+       }
+
+       if (capab == CAPAB_HT40 || capab == CAPAB_VHT) {
+               ie = wpa_scan_get_ie(res, WLAN_EID_HT_OPERATION);
+               if (ie && ie[1] >= 2 &&
+                   (ie[3] & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK)) {
+                       tmp = max_ht40_rate(snr);
+                       if (tmp > est)
+                               est = tmp;
+               }
+       }
+
+       if (capab == CAPAB_VHT) {
+               /* Use +1 to assume VHT is always faster than HT */
+               ie = wpa_scan_get_ie(res, WLAN_EID_VHT_CAP);
+               if (ie) {
+                       tmp = max_ht20_rate(snr) + 1;
+                       if (tmp > est)
+                               est = tmp;
+
+                       ie = wpa_scan_get_ie(res, WLAN_EID_HT_OPERATION);
+                       if (ie && ie[1] >= 2 &&
+                           (ie[3] &
+                            HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK)) {
+                               tmp = max_ht40_rate(snr) + 1;
+                               if (tmp > est)
+                                       est = tmp;
+                       }
+
+                       ie = wpa_scan_get_ie(res, WLAN_EID_VHT_OPERATION);
+                       if (ie && ie[1] >= 1 &&
+                           (ie[2] & VHT_OPMODE_CHANNEL_WIDTH_MASK)) {
+                               tmp = max_vht80_rate(snr) + 1;
+                               if (tmp > est)
+                                       est = tmp;
+                       }
+               }
+       }
+
+       /* TODO: channel utilization and AP load (e.g., from AP Beacon) */
+
+       res->est_throughput = est;
+}
+
+
 /**
  * wpa_supplicant_get_scan_results - Get scan results
  * @wpa_s: Pointer to wpa_supplicant data
@@ -1844,12 +2019,8 @@ wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s,
        for (i = 0; i < scan_res->num; i++) {
                struct wpa_scan_res *scan_res_item = scan_res->res[i];
 
-               if (scan_res_item->flags & WPA_SCAN_NOISE_INVALID) {
-                       scan_res_item->noise =
-                               IS_5GHZ(scan_res_item->freq) ?
-                               DEFAULT_NOISE_FLOOR_5GHZ :
-                               DEFAULT_NOISE_FLOOR_2GHZ;
-               }
+               scan_snr(scan_res_item);
+               scan_est_throughput(wpa_s, scan_res_item);
        }
 
 #ifdef CONFIG_WPS

diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 29d1aaf..05b785e 100644 (file)
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -4071,6 +4071,23 @@ static int wpa_supplicant_init_iface(struct wpa_supplicant *wpa_s,
        wpa_s->hw.modes = wpa_drv_get_hw_feature_data(wpa_s,
                                                      &wpa_s->hw.num_modes,
                                                      &wpa_s->hw.flags);
+       if (wpa_s->hw.modes) {
+               u16 i;
+
+               for (i = 0; i < wpa_s->hw.num_modes; i++) {
+                       if (wpa_s->hw.modes[i].vht_capab) {
+                               wpa_s->hw_capab = CAPAB_VHT;
+                               break;
+                       }
+
+                       if (wpa_s->hw.modes[i].ht_capab &
+                           HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET)
+                               wpa_s->hw_capab = CAPAB_HT40;
+                       else if (wpa_s->hw.modes[i].ht_capab &&
+                                wpa_s->hw_capab == CAPAB_NO_HT_VHT)
+                               wpa_s->hw_capab = CAPAB_HT;
+               }
+       }
 
        capa_res = wpa_drv_get_capa(wpa_s, &capa);
        if (capa_res == 0) {

diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index 05c3d92..7949a01 100644 (file)
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -888,6 +888,12 @@ struct wpa_supplicant {
                u16 num_modes;
                u16 flags;
        } hw;
+       enum local_hw_capab {
+               CAPAB_NO_HT_VHT,
+               CAPAB_HT,
+               CAPAB_HT40,
+               CAPAB_VHT,
+       } hw_capab;
 #ifdef CONFIG_MACSEC
        struct ieee802_1x_kay *kay;
 #endif /* CONFIG_MACSEC */