- <term>Host AP driver for Prism2/2.5/3 (development
- snapshot/v0.2.x)</term>
- <listitem>
- <para> (http://hostap.epitest.fi/) Driver needs to be set in
- Managed mode (<emphasis>iwconfig wlan0 mode managed</emphasis>).
- Please note that station firmware version needs to be 1.7.0 or
- newer to work in WPA mode.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Linuxant DriverLoader</term>
- <listitem>
- <para>(http://www.linuxant.com/driverloader/)
- with Windows NDIS driver for your wlan card supporting WPA.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Agere Systems Inc. Linux Driver</term>
- <listitem>
- <para> (http://www.agere.com/support/drivers/) Please note
- that the driver interface file (driver_hermes.c) and hardware
- specific include files are not included in the wpa_supplicant
- distribution. You will need to copy these from the source
- package of the Agere driver.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>madwifi driver for cards based on Atheros chip set (ar521x)</term>
- <listitem>
- <para> (http://sourceforge.net/projects/madwifi/) Please
- note that you will need to modify the wpa_supplicant .config
- file to use the correct path for the madwifi driver root
- directory (CFLAGS += -I../madwifi/wpa line in example
- defconfig).</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Linux ndiswrapper</term>
- <listitem>
- <para> (http://ndiswrapper.sourceforge.net/) with Windows
- NDIS driver.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Broadcom wl.o driver</term>
- <listitem>
- <para> This is a generic Linux driver for Broadcom IEEE
- 802.11a/g cards. However, it is proprietary driver that is
- not publicly available except for couple of exceptions, mainly
- Broadcom-based APs/wireless routers that use Linux. The driver
- binary can be downloaded, e.g., from Linksys support site
- (http://www.linksys.com/support/gpl.asp) for Linksys
- WRT54G. The GPL tarball includes cross-compiler and the needed
- header file, wlioctl.h, for compiling wpa_supplicant. This
- driver support in wpa_supplicant is expected to work also with
- other devices based on Broadcom driver (assuming the driver
- includes client mode support).</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term> Intel ipw2100 driver</term>
- <listitem>
- <para> (http://sourceforge.net/projects/ipw2100/)</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Intel ipw2200 driver</term>
- <listitem>
- <para> (http://sourceforge.net/projects/ipw2200/)</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>