autoreconf

diff --cc Makefile.in
index 1aa934f,e69872a..adcd919
--- 1/Makefile.in
--- 2/Makefile.in
+++ b/Makefile.in
@@@ -33,75 -35,66 +33,81 @@@ PRE_UNINSTALL = 
  POST_UNINSTALL = :
  build_triplet = @build@
  host_triplet = @host@
 -subdir = libeap
 -DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.am \
 -      $(srcdir)/Makefile.in COPYING
 +subdir = .
 +DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 +      $(srcdir)/Makefile.in $(srcdir)/config.h.in \
-       $(top_srcdir)/configure config.guess config.sub depcomp \
-       install-sh ltmain.sh missing
++      $(srcdir)/mech_eap.spec.in $(top_srcdir)/configure \
++      build-aux/compile build-aux/config.guess build-aux/config.sub \
++      build-aux/depcomp build-aux/install-sh build-aux/ltmain.sh \
++      build-aux/missing config.guess config.sub depcomp install-sh \
++      ltmain.sh missing
  ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+       $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+       $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+       $(top_srcdir)/m4/minuso.m4 $(top_srcdir)/acinclude.m4 \
        $(top_srcdir)/configure.ac
  am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
        $(ACLOCAL_M4)
 +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 + configure.lineno config.status.lineno
  mkinstalldirs = $(install_sh) -d
 -CONFIG_HEADER = $(top_builddir)/config.h
 -CONFIG_CLEAN_FILES =
 +CONFIG_HEADER = config.h
- CONFIG_CLEAN_FILES =
++CONFIG_CLEAN_FILES = mech_eap.spec
  CONFIG_CLEAN_VPATH_FILES =
 -LTLIBRARIES = $(noinst_LTLIBRARIES)
 -libeap_la_LIBADD =
 -am__objects_1 = eap_peap_common.lo eap_psk_common.lo eap_pax_common.lo \
 -      eap_sake_common.lo eap_gpsk_common.lo chap.lo
 -am__objects_2 = eap_tls.lo eap_peap.lo eap_ttls.lo eap_md5.lo \
 -      eap_mschapv2.lo mschapv2.lo eap_otp.lo eap_gtc.lo eap_leap.lo \
 -      eap_psk.lo eap_pax.lo eap_sake.lo eap_gpsk.lo eap.lo \
 -      eap_common.lo eap_methods.lo eap_tls_common.lo
 -am__objects_3 = base64.lo common.lo ip_addr.lo radiotap.lo trace.lo \
 -      uuid.lo wpa_debug.lo wpabuf.lo os_unix.lo
 -am__objects_4 = aes-cbc.lo aes-ctr.lo aes-eax.lo aes-encblock.lo \
 -      aes-internal.lo aes-internal-dec.lo aes-internal-enc.lo \
 -      aes-omac1.lo aes-unwrap.lo aes-wrap.lo des-internal.lo \
 -      dh_group5.lo dh_groups.lo md4-internal.lo md5.lo \
 -      md5-internal.lo md5-non-fips.lo milenage.lo ms_funcs.lo rc4.lo \
 -      sha1.lo sha1-internal.lo sha1-pbkdf2.lo sha1-tlsprf.lo \
 -      sha1-tprf.lo sha256.lo sha256-internal.lo crypto_internal.lo \
 -      crypto_internal-cipher.lo crypto_internal-modexp.lo \
 -      crypto_internal-rsa.lo tls_internal.lo fips_prf_internal.lo
 -am__objects_5 = asn1.lo bignum.lo pkcs1.lo pkcs5.lo pkcs8.lo rsa.lo \
 -      tlsv1_client.lo tlsv1_client_read.lo tlsv1_client_write.lo \
 -      tlsv1_common.lo tlsv1_cred.lo tlsv1_record.lo tlsv1_server.lo \
 -      tlsv1_server_read.lo tlsv1_server_write.lo x509v3.lo
 -am_libeap_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
 -      $(am__objects_3) $(am__objects_4) $(am__objects_5)
 -libeap_la_OBJECTS = $(am_libeap_la_OBJECTS)
 -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 -depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
 -am__depfiles_maybe = depfiles
 -am__mv = mv -f
 -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 -      $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 -      --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 -      $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 -CCLD = $(CC)
 -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 -      --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 -      $(LDFLAGS) -o $@
 -SOURCES = $(libeap_la_SOURCES)
 -DIST_SOURCES = $(libeap_la_SOURCES)
 -HEADERS = $(noinst_HEADERS)
 +SOURCES =
 +DIST_SOURCES =
 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 +      html-recursive info-recursive install-data-recursive \
 +      install-dvi-recursive install-exec-recursive \
 +      install-html-recursive install-info-recursive \
 +      install-pdf-recursive install-ps-recursive install-recursive \
 +      installcheck-recursive installdirs-recursive pdf-recursive \
 +      ps-recursive uninstall-recursive
 +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive       \
 +  distclean-recursive maintainer-clean-recursive
 +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 +      $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 +      distdir dist dist-all distcheck
  ETAGS = etags
  CTAGS = ctags
 +DIST_SUBDIRS = $(SUBDIRS)
  DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 +distdir = $(PACKAGE)-$(VERSION)
 +top_distdir = $(distdir)
 +am__remove_distdir = \
 +  { test ! -d "$(distdir)" \
 +    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 +         && rm -fr "$(distdir)"; }; }
 +am__relativize = \
 +  dir0=`pwd`; \
 +  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 +  sed_rest='s,^[^/]*/*,,'; \
 +  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 +  sed_butlast='s,/*[^/]*$$,,'; \
 +  while test -n "$$dir1"; do \
 +    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 +    if test "$$first" != "."; then \
 +      if test "$$first" = ".."; then \
 +        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 +        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 +      else \
 +        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 +        if test "$$first2" = "$$first"; then \
 +          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 +        else \
 +          dir2="../$$dir2"; \
 +        fi; \
 +        dir0="$$dir0"/"$$first"; \
 +      fi; \
 +    fi; \
 +    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 +  done; \
 +  reldir="$$dir2"
 +DIST_ARCHIVES = $(distdir).tar.gz
 +GZIP_ENV = --best
 +distuninstallcheck_listfiles = find . -type f -print
 +distcleancheck_listfiles = find . -type f -print
  ACLOCAL = @ACLOCAL@
  AMTAR = @AMTAR@
  AR = @AR@
@@@ -236,14 -248,163 +252,16 @@@ top_build_prefix = @top_build_prefix
  top_builddir = @top_builddir@
  top_srcdir = @top_srcdir@
  AUTOMAKE_OPTIONS = foreign
 -AM_CPPFLAGS = -I$(srcdir)/src -I$(srcdir)/eap_example -I$(srcdir)/src/utils 
 -noinst_HEADERS = \
 -      src/common/defs.h \
 -      src/common/eapol_common.h \
 -      src/common/ieee802_11_common.h \
 -      src/common/ieee802_11_defs.h \
 -      src/common/privsep_commands.h \
 -      src/common/version.h \
 -      src/common/wpa_common.h \
 -      src/common/wpa_ctrl.h
 -
 -EXTRA_DIST = src/tls/libtommath.c
 -SOURCES_BOTH = src/eap_common/eap_peap_common.c \
 -      src/eap_common/eap_psk_common.c \
 -      src/eap_common/eap_pax_common.c \
 -      src/eap_common/eap_sake_common.c \
 -      src/eap_common/eap_gpsk_common.c src/eap_common/chap.c \
 -      src/eap_common/chap.h src/eap_common/eap_common.h \
 -      src/eap_common/eap_defs.h src/eap_common/eap_fast_common.h \
 -      src/eap_common/eap_gpsk_common.h \
 -      src/eap_common/eap_ikev2_common.h \
 -      src/eap_common/eap_pax_common.h \
 -      src/eap_common/eap_peap_common.h \
 -      src/eap_common/eap_psk_common.h \
 -      src/eap_common/eap_pwd_common.h \
 -      src/eap_common/eap_sake_common.h \
 -      src/eap_common/eap_sim_common.h \
 -      src/eap_common/eap_tlv_common.h src/eap_common/eap_ttls.h \
 -      src/eap_common/eap_wsc_common.h src/eap_common/ikev2_common.h
 -SOURCES_peer = src/eap_peer/eap_tls.c src/eap_peer/eap_peap.c \
 -      src/eap_peer/eap_ttls.c src/eap_peer/eap_md5.c \
 -      src/eap_peer/eap_mschapv2.c src/eap_peer/mschapv2.c \
 -      src/eap_peer/eap_otp.c src/eap_peer/eap_gtc.c \
 -      src/eap_peer/eap_leap.c src/eap_peer/eap_psk.c \
 -      src/eap_peer/eap_pax.c src/eap_peer/eap_sake.c \
 -      src/eap_peer/eap_gpsk.c src/eap_peer/eap.c \
 -      src/eap_common/eap_common.c src/eap_peer/eap_methods.c \
 -      src/eap_peer/eap_tls_common.c src/eap_peer/eap_config.h \
 -      src/eap_peer/eap_fast_pac.h src/eap_peer/eap.h \
 -      src/eap_peer/eap_i.h src/eap_peer/eap_methods.h \
 -      src/eap_peer/eap_tls_common.h src/eap_peer/ikev2.h \
 -      src/eap_peer/mschapv2.h src/eap_peer/tncc.h
 -UTILS_SRCS = src/utils/base64.c \
 -      src/utils/common.c \
 -      src/utils/ip_addr.c \
 -      src/utils/radiotap.c \
 -      src/utils/trace.c \
 -      src/utils/uuid.c \
 -      src/utils/wpa_debug.c \
 -      src/utils/wpabuf.c \
 -      src/utils/os_unix.c \
 -      src/utils/base64.h \
 -      src/utils/build_config.h \
 -      src/utils/common.h \
 -      src/utils/eloop.h \
 -      src/utils/includes.h \
 -      src/utils/ip_addr.h \
 -      src/utils/list.h \
 -      src/utils/os.h \
 -      src/utils/pcsc_funcs.h \
 -      src/utils/radiotap.h \
 -      src/utils/radiotap_iter.h \
 -      src/utils/state_machine.h \
 -      src/utils/trace.h \
 -      src/utils/uuid.h \
 -      src/utils/wpabuf.h \
 -      src/utils/wpa_debug.h
 -
 -CRYPTO_SRCS = \
 -    src/crypto/aes-cbc.c \
 -    src/crypto/aes-ctr.c \
 -    src/crypto/aes-eax.c \
 -    src/crypto/aes-encblock.c \
 -    src/crypto/aes-internal.c \
 -    src/crypto/aes-internal-dec.c \
 -    src/crypto/aes-internal-enc.c \
 -    src/crypto/aes-omac1.c \
 -    src/crypto/aes-unwrap.c \
 -    src/crypto/aes-wrap.c \
 -    src/crypto/des-internal.c \
 -    src/crypto/dh_group5.c \
 -    src/crypto/dh_groups.c \
 -    src/crypto/md4-internal.c \
 -    src/crypto/md5.c \
 -    src/crypto/md5-internal.c \
 -    src/crypto/md5-non-fips.c \
 -    src/crypto/milenage.c \
 -    src/crypto/ms_funcs.c \
 -    src/crypto/rc4.c \
 -    src/crypto/sha1.c \
 -    src/crypto/sha1-internal.c \
 -    src/crypto/sha1-pbkdf2.c \
 -    src/crypto/sha1-tlsprf.c \
 -    src/crypto/sha1-tprf.c \
 -    src/crypto/sha256.c \
 -    src/crypto/sha256-internal.c \
 -    src/crypto/crypto_internal.c \
 -    src/crypto/crypto_internal-cipher.c \
 -    src/crypto/crypto_internal-modexp.c \
 -    src/crypto/crypto_internal-rsa.c \
 -    src/crypto/tls_internal.c \
 -    src/crypto/fips_prf_internal.c \
 -      src/crypto/aes.h \
 -      src/crypto/aes_i.h \
 -      src/crypto/aes_wrap.h \
 -      src/crypto/crypto.h \
 -      src/crypto/des_i.h \
 -      src/crypto/dh_group5.h \
 -      src/crypto/dh_groups.h \
 -      src/crypto/md5.h \
 -      src/crypto/md5_i.h \
 -      src/crypto/milenage.h \
 -      src/crypto/ms_funcs.h \
 -      src/crypto/sha1.h \
 -      src/crypto/sha1_i.h \
 -      src/crypto/sha256.h \
 -      src/crypto/tls.h
 -
 -TLS_SRCS = \
 -    src/tls/asn1.c \
 -    src/tls/bignum.c \
 -    src/tls/pkcs1.c \
 -    src/tls/pkcs5.c \
 -    src/tls/pkcs8.c \
 -    src/tls/rsa.c \
 -    src/tls/tlsv1_client.c \
 -    src/tls/tlsv1_client_read.c \
 -    src/tls/tlsv1_client_write.c \
 -    src/tls/tlsv1_common.c \
 -    src/tls/tlsv1_cred.c \
 -    src/tls/tlsv1_record.c \
 -    src/tls/tlsv1_server.c \
 -    src/tls/tlsv1_server_read.c \
 -    src/tls/tlsv1_server_write.c \
 -    src/tls/x509v3.c \
 -      src/tls/asn1.h \
 -      src/tls/bignum.h \
 -      src/tls/pkcs1.h \
 -      src/tls/pkcs5.h \
 -      src/tls/pkcs8.h \
 -      src/tls/rsa.h \
 -      src/tls/tlsv1_client.h \
 -      src/tls/tlsv1_client_i.h \
 -      src/tls/tlsv1_common.h \
 -      src/tls/tlsv1_cred.h \
 -      src/tls/tlsv1_record.h \
 -      src/tls/tlsv1_server.h \
 -      src/tls/tlsv1_server_i.h \
 -      src/tls/x509v3.h 
 -
 -libeap_la_SOURCES = $(SOURCES_BOTH) $(SOURCES_peer) $(UTILS_SRCS) $(CRYPTO_SRCS) $(TLS_SRCS)
 -noinst_LTLIBRARIES = libeap.la
 -all: all-am
++ACLOCAL_AMFLAGS = -I m4
 +SUBDIRS = libeap mech_eap
++EXTRA_DIST = mech_eap.spec
 +all: config.h
 +      $(MAKE) $(AM_MAKEFLAGS) all-recursive
  
  .SUFFIXES:
 -.SUFFIXES: .c .lo .o .obj
 +am--refresh:
 +      @:
- $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
            *$$dep*) \
@@@ -268,30 -427,700 +286,32 @@@ Makefile: $(srcdir)/Makefile.in $(top_b
        esac;
  
  $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 -      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +      $(SHELL) ./config.status --recheck
  
- $(top_srcdir)/configure:  $(am__configure_deps)
+ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 -      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +      $(am__cd) $(srcdir) && $(AUTOCONF)
- $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 -      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +      $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
  $(am__aclocal_m4_deps):
  
 -clean-noinstLTLIBRARIES:
 -      -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
 -      @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
 -        dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 -        test "$$dir" != "$$p" || dir=.; \
 -        echo "rm -f \"$${dir}/so_locations\""; \
 -        rm -f "$${dir}/so_locations"; \
 -      done
 -libeap.la: $(libeap_la_OBJECTS) $(libeap_la_DEPENDENCIES) 
 -      $(LINK)  $(libeap_la_OBJECTS) $(libeap_la_LIBADD) $(LIBS)
 -
 -mostlyclean-compile:
 -      -rm -f *.$(OBJEXT)
 -
 -distclean-compile:
 -      -rm -f *.tab.c
 -
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-cbc.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-ctr.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-eax.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-encblock.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal-dec.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal-enc.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-omac1.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-unwrap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-wrap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asn1.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/base64.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bignum.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-cipher.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-modexp.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-rsa.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/des-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dh_group5.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dh_groups.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gpsk.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gpsk_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gtc.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_leap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_md5.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_methods.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_mschapv2.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_otp.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_pax.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_pax_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_peap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_peap_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_psk.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_psk_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_sake.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_sake_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_tls.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_tls_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_ttls.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fips_prf_internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip_addr.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md4-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5-non-fips.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/milenage.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ms_funcs.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mschapv2.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_unix.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs1.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs5.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs8.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/radiotap.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rc4.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rsa.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-pbkdf2.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-tlsprf.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-tprf.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha256-internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha256.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls_internal.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client_read.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client_write.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_common.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_cred.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_record.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server_read.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server_write.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trace.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uuid.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wpa_debug.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wpabuf.Plo@am__quote@
 -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x509v3.Plo@am__quote@
 -
 -.c.o:
 -@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 -
 -.c.obj:
 -@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
 -
 -.c.lo:
 -@am__fastdepCC_TRUE@  $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
 -
 -eap_peap_common.lo: src/eap_common/eap_peap_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_peap_common.lo -MD -MP -MF $(DEPDIR)/eap_peap_common.Tpo -c -o eap_peap_common.lo `test -f 'src/eap_common/eap_peap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_peap_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_peap_common.Tpo $(DEPDIR)/eap_peap_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_peap_common.c' object='eap_peap_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_peap_common.lo `test -f 'src/eap_common/eap_peap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_peap_common.c
 -
 -eap_psk_common.lo: src/eap_common/eap_psk_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_psk_common.lo -MD -MP -MF $(DEPDIR)/eap_psk_common.Tpo -c -o eap_psk_common.lo `test -f 'src/eap_common/eap_psk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_psk_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_psk_common.Tpo $(DEPDIR)/eap_psk_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_psk_common.c' object='eap_psk_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_psk_common.lo `test -f 'src/eap_common/eap_psk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_psk_common.c
 -
 -eap_pax_common.lo: src/eap_common/eap_pax_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_pax_common.lo -MD -MP -MF $(DEPDIR)/eap_pax_common.Tpo -c -o eap_pax_common.lo `test -f 'src/eap_common/eap_pax_common.c' || echo '$(srcdir)/'`src/eap_common/eap_pax_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_pax_common.Tpo $(DEPDIR)/eap_pax_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_pax_common.c' object='eap_pax_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_pax_common.lo `test -f 'src/eap_common/eap_pax_common.c' || echo '$(srcdir)/'`src/eap_common/eap_pax_common.c
 -
 -eap_sake_common.lo: src/eap_common/eap_sake_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_sake_common.lo -MD -MP -MF $(DEPDIR)/eap_sake_common.Tpo -c -o eap_sake_common.lo `test -f 'src/eap_common/eap_sake_common.c' || echo '$(srcdir)/'`src/eap_common/eap_sake_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_sake_common.Tpo $(DEPDIR)/eap_sake_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_sake_common.c' object='eap_sake_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_sake_common.lo `test -f 'src/eap_common/eap_sake_common.c' || echo '$(srcdir)/'`src/eap_common/eap_sake_common.c
 -
 -eap_gpsk_common.lo: src/eap_common/eap_gpsk_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gpsk_common.lo -MD -MP -MF $(DEPDIR)/eap_gpsk_common.Tpo -c -o eap_gpsk_common.lo `test -f 'src/eap_common/eap_gpsk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_gpsk_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gpsk_common.Tpo $(DEPDIR)/eap_gpsk_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_gpsk_common.c' object='eap_gpsk_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gpsk_common.lo `test -f 'src/eap_common/eap_gpsk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_gpsk_common.c
 -
 -chap.lo: src/eap_common/chap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chap.lo -MD -MP -MF $(DEPDIR)/chap.Tpo -c -o chap.lo `test -f 'src/eap_common/chap.c' || echo '$(srcdir)/'`src/eap_common/chap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/chap.Tpo $(DEPDIR)/chap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/chap.c' object='chap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chap.lo `test -f 'src/eap_common/chap.c' || echo '$(srcdir)/'`src/eap_common/chap.c
 -
 -eap_tls.lo: src/eap_peer/eap_tls.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_tls.lo -MD -MP -MF $(DEPDIR)/eap_tls.Tpo -c -o eap_tls.lo `test -f 'src/eap_peer/eap_tls.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_tls.Tpo $(DEPDIR)/eap_tls.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_tls.c' object='eap_tls.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_tls.lo `test -f 'src/eap_peer/eap_tls.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls.c
 -
 -eap_peap.lo: src/eap_peer/eap_peap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_peap.lo -MD -MP -MF $(DEPDIR)/eap_peap.Tpo -c -o eap_peap.lo `test -f 'src/eap_peer/eap_peap.c' || echo '$(srcdir)/'`src/eap_peer/eap_peap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_peap.Tpo $(DEPDIR)/eap_peap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_peap.c' object='eap_peap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_peap.lo `test -f 'src/eap_peer/eap_peap.c' || echo '$(srcdir)/'`src/eap_peer/eap_peap.c
 -
 -eap_ttls.lo: src/eap_peer/eap_ttls.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_ttls.lo -MD -MP -MF $(DEPDIR)/eap_ttls.Tpo -c -o eap_ttls.lo `test -f 'src/eap_peer/eap_ttls.c' || echo '$(srcdir)/'`src/eap_peer/eap_ttls.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_ttls.Tpo $(DEPDIR)/eap_ttls.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_ttls.c' object='eap_ttls.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_ttls.lo `test -f 'src/eap_peer/eap_ttls.c' || echo '$(srcdir)/'`src/eap_peer/eap_ttls.c
 -
 -eap_md5.lo: src/eap_peer/eap_md5.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_md5.lo -MD -MP -MF $(DEPDIR)/eap_md5.Tpo -c -o eap_md5.lo `test -f 'src/eap_peer/eap_md5.c' || echo '$(srcdir)/'`src/eap_peer/eap_md5.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_md5.Tpo $(DEPDIR)/eap_md5.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_md5.c' object='eap_md5.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_md5.lo `test -f 'src/eap_peer/eap_md5.c' || echo '$(srcdir)/'`src/eap_peer/eap_md5.c
 -
 -eap_mschapv2.lo: src/eap_peer/eap_mschapv2.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_mschapv2.lo -MD -MP -MF $(DEPDIR)/eap_mschapv2.Tpo -c -o eap_mschapv2.lo `test -f 'src/eap_peer/eap_mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/eap_mschapv2.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_mschapv2.Tpo $(DEPDIR)/eap_mschapv2.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_mschapv2.c' object='eap_mschapv2.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_mschapv2.lo `test -f 'src/eap_peer/eap_mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/eap_mschapv2.c
 -
 -mschapv2.lo: src/eap_peer/mschapv2.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mschapv2.lo -MD -MP -MF $(DEPDIR)/mschapv2.Tpo -c -o mschapv2.lo `test -f 'src/eap_peer/mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/mschapv2.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mschapv2.Tpo $(DEPDIR)/mschapv2.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/mschapv2.c' object='mschapv2.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mschapv2.lo `test -f 'src/eap_peer/mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/mschapv2.c
 -
 -eap_otp.lo: src/eap_peer/eap_otp.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_otp.lo -MD -MP -MF $(DEPDIR)/eap_otp.Tpo -c -o eap_otp.lo `test -f 'src/eap_peer/eap_otp.c' || echo '$(srcdir)/'`src/eap_peer/eap_otp.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_otp.Tpo $(DEPDIR)/eap_otp.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_otp.c' object='eap_otp.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_otp.lo `test -f 'src/eap_peer/eap_otp.c' || echo '$(srcdir)/'`src/eap_peer/eap_otp.c
 -
 -eap_gtc.lo: src/eap_peer/eap_gtc.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gtc.lo -MD -MP -MF $(DEPDIR)/eap_gtc.Tpo -c -o eap_gtc.lo `test -f 'src/eap_peer/eap_gtc.c' || echo '$(srcdir)/'`src/eap_peer/eap_gtc.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gtc.Tpo $(DEPDIR)/eap_gtc.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_gtc.c' object='eap_gtc.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gtc.lo `test -f 'src/eap_peer/eap_gtc.c' || echo '$(srcdir)/'`src/eap_peer/eap_gtc.c
 -
 -eap_leap.lo: src/eap_peer/eap_leap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_leap.lo -MD -MP -MF $(DEPDIR)/eap_leap.Tpo -c -o eap_leap.lo `test -f 'src/eap_peer/eap_leap.c' || echo '$(srcdir)/'`src/eap_peer/eap_leap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_leap.Tpo $(DEPDIR)/eap_leap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_leap.c' object='eap_leap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_leap.lo `test -f 'src/eap_peer/eap_leap.c' || echo '$(srcdir)/'`src/eap_peer/eap_leap.c
 -
 -eap_psk.lo: src/eap_peer/eap_psk.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_psk.lo -MD -MP -MF $(DEPDIR)/eap_psk.Tpo -c -o eap_psk.lo `test -f 'src/eap_peer/eap_psk.c' || echo '$(srcdir)/'`src/eap_peer/eap_psk.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_psk.Tpo $(DEPDIR)/eap_psk.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_psk.c' object='eap_psk.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_psk.lo `test -f 'src/eap_peer/eap_psk.c' || echo '$(srcdir)/'`src/eap_peer/eap_psk.c
 -
 -eap_pax.lo: src/eap_peer/eap_pax.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_pax.lo -MD -MP -MF $(DEPDIR)/eap_pax.Tpo -c -o eap_pax.lo `test -f 'src/eap_peer/eap_pax.c' || echo '$(srcdir)/'`src/eap_peer/eap_pax.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_pax.Tpo $(DEPDIR)/eap_pax.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_pax.c' object='eap_pax.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_pax.lo `test -f 'src/eap_peer/eap_pax.c' || echo '$(srcdir)/'`src/eap_peer/eap_pax.c
 -
 -eap_sake.lo: src/eap_peer/eap_sake.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_sake.lo -MD -MP -MF $(DEPDIR)/eap_sake.Tpo -c -o eap_sake.lo `test -f 'src/eap_peer/eap_sake.c' || echo '$(srcdir)/'`src/eap_peer/eap_sake.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_sake.Tpo $(DEPDIR)/eap_sake.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_sake.c' object='eap_sake.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_sake.lo `test -f 'src/eap_peer/eap_sake.c' || echo '$(srcdir)/'`src/eap_peer/eap_sake.c
 -
 -eap_gpsk.lo: src/eap_peer/eap_gpsk.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gpsk.lo -MD -MP -MF $(DEPDIR)/eap_gpsk.Tpo -c -o eap_gpsk.lo `test -f 'src/eap_peer/eap_gpsk.c' || echo '$(srcdir)/'`src/eap_peer/eap_gpsk.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gpsk.Tpo $(DEPDIR)/eap_gpsk.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_gpsk.c' object='eap_gpsk.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gpsk.lo `test -f 'src/eap_peer/eap_gpsk.c' || echo '$(srcdir)/'`src/eap_peer/eap_gpsk.c
 -
 -eap.lo: src/eap_peer/eap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap.lo -MD -MP -MF $(DEPDIR)/eap.Tpo -c -o eap.lo `test -f 'src/eap_peer/eap.c' || echo '$(srcdir)/'`src/eap_peer/eap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap.Tpo $(DEPDIR)/eap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap.c' object='eap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap.lo `test -f 'src/eap_peer/eap.c' || echo '$(srcdir)/'`src/eap_peer/eap.c
 -
 -eap_common.lo: src/eap_common/eap_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_common.lo -MD -MP -MF $(DEPDIR)/eap_common.Tpo -c -o eap_common.lo `test -f 'src/eap_common/eap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_common.Tpo $(DEPDIR)/eap_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_common.c' object='eap_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_common.lo `test -f 'src/eap_common/eap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_common.c
 -
 -eap_methods.lo: src/eap_peer/eap_methods.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_methods.lo -MD -MP -MF $(DEPDIR)/eap_methods.Tpo -c -o eap_methods.lo `test -f 'src/eap_peer/eap_methods.c' || echo '$(srcdir)/'`src/eap_peer/eap_methods.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_methods.Tpo $(DEPDIR)/eap_methods.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_methods.c' object='eap_methods.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_methods.lo `test -f 'src/eap_peer/eap_methods.c' || echo '$(srcdir)/'`src/eap_peer/eap_methods.c
 -
 -eap_tls_common.lo: src/eap_peer/eap_tls_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_tls_common.lo -MD -MP -MF $(DEPDIR)/eap_tls_common.Tpo -c -o eap_tls_common.lo `test -f 'src/eap_peer/eap_tls_common.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_tls_common.Tpo $(DEPDIR)/eap_tls_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_tls_common.c' object='eap_tls_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_tls_common.lo `test -f 'src/eap_peer/eap_tls_common.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls_common.c
 -
 -base64.lo: src/utils/base64.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT base64.lo -MD -MP -MF $(DEPDIR)/base64.Tpo -c -o base64.lo `test -f 'src/utils/base64.c' || echo '$(srcdir)/'`src/utils/base64.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/base64.Tpo $(DEPDIR)/base64.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/base64.c' object='base64.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o base64.lo `test -f 'src/utils/base64.c' || echo '$(srcdir)/'`src/utils/base64.c
 -
 -common.lo: src/utils/common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.lo -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.lo `test -f 'src/utils/common.c' || echo '$(srcdir)/'`src/utils/common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/common.c' object='common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.lo `test -f 'src/utils/common.c' || echo '$(srcdir)/'`src/utils/common.c
 -
 -ip_addr.lo: src/utils/ip_addr.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ip_addr.lo -MD -MP -MF $(DEPDIR)/ip_addr.Tpo -c -o ip_addr.lo `test -f 'src/utils/ip_addr.c' || echo '$(srcdir)/'`src/utils/ip_addr.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/ip_addr.Tpo $(DEPDIR)/ip_addr.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/ip_addr.c' object='ip_addr.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ip_addr.lo `test -f 'src/utils/ip_addr.c' || echo '$(srcdir)/'`src/utils/ip_addr.c
 -
 -radiotap.lo: src/utils/radiotap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT radiotap.lo -MD -MP -MF $(DEPDIR)/radiotap.Tpo -c -o radiotap.lo `test -f 'src/utils/radiotap.c' || echo '$(srcdir)/'`src/utils/radiotap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/radiotap.Tpo $(DEPDIR)/radiotap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/radiotap.c' object='radiotap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o radiotap.lo `test -f 'src/utils/radiotap.c' || echo '$(srcdir)/'`src/utils/radiotap.c
 -
 -trace.lo: src/utils/trace.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT trace.lo -MD -MP -MF $(DEPDIR)/trace.Tpo -c -o trace.lo `test -f 'src/utils/trace.c' || echo '$(srcdir)/'`src/utils/trace.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/trace.Tpo $(DEPDIR)/trace.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/trace.c' object='trace.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o trace.lo `test -f 'src/utils/trace.c' || echo '$(srcdir)/'`src/utils/trace.c
 -
 -uuid.lo: src/utils/uuid.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT uuid.lo -MD -MP -MF $(DEPDIR)/uuid.Tpo -c -o uuid.lo `test -f 'src/utils/uuid.c' || echo '$(srcdir)/'`src/utils/uuid.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/uuid.Tpo $(DEPDIR)/uuid.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/uuid.c' object='uuid.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o uuid.lo `test -f 'src/utils/uuid.c' || echo '$(srcdir)/'`src/utils/uuid.c
 -
 -wpa_debug.lo: src/utils/wpa_debug.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT wpa_debug.lo -MD -MP -MF $(DEPDIR)/wpa_debug.Tpo -c -o wpa_debug.lo `test -f 'src/utils/wpa_debug.c' || echo '$(srcdir)/'`src/utils/wpa_debug.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/wpa_debug.Tpo $(DEPDIR)/wpa_debug.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/wpa_debug.c' object='wpa_debug.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o wpa_debug.lo `test -f 'src/utils/wpa_debug.c' || echo '$(srcdir)/'`src/utils/wpa_debug.c
 -
 -wpabuf.lo: src/utils/wpabuf.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT wpabuf.lo -MD -MP -MF $(DEPDIR)/wpabuf.Tpo -c -o wpabuf.lo `test -f 'src/utils/wpabuf.c' || echo '$(srcdir)/'`src/utils/wpabuf.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/wpabuf.Tpo $(DEPDIR)/wpabuf.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/wpabuf.c' object='wpabuf.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o wpabuf.lo `test -f 'src/utils/wpabuf.c' || echo '$(srcdir)/'`src/utils/wpabuf.c
 -
 -os_unix.lo: src/utils/os_unix.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT os_unix.lo -MD -MP -MF $(DEPDIR)/os_unix.Tpo -c -o os_unix.lo `test -f 'src/utils/os_unix.c' || echo '$(srcdir)/'`src/utils/os_unix.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/os_unix.Tpo $(DEPDIR)/os_unix.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/os_unix.c' object='os_unix.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o os_unix.lo `test -f 'src/utils/os_unix.c' || echo '$(srcdir)/'`src/utils/os_unix.c
 -
 -aes-cbc.lo: src/crypto/aes-cbc.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-cbc.lo -MD -MP -MF $(DEPDIR)/aes-cbc.Tpo -c -o aes-cbc.lo `test -f 'src/crypto/aes-cbc.c' || echo '$(srcdir)/'`src/crypto/aes-cbc.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-cbc.Tpo $(DEPDIR)/aes-cbc.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-cbc.c' object='aes-cbc.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-cbc.lo `test -f 'src/crypto/aes-cbc.c' || echo '$(srcdir)/'`src/crypto/aes-cbc.c
 -
 -aes-ctr.lo: src/crypto/aes-ctr.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-ctr.lo -MD -MP -MF $(DEPDIR)/aes-ctr.Tpo -c -o aes-ctr.lo `test -f 'src/crypto/aes-ctr.c' || echo '$(srcdir)/'`src/crypto/aes-ctr.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-ctr.Tpo $(DEPDIR)/aes-ctr.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-ctr.c' object='aes-ctr.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-ctr.lo `test -f 'src/crypto/aes-ctr.c' || echo '$(srcdir)/'`src/crypto/aes-ctr.c
 -
 -aes-eax.lo: src/crypto/aes-eax.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-eax.lo -MD -MP -MF $(DEPDIR)/aes-eax.Tpo -c -o aes-eax.lo `test -f 'src/crypto/aes-eax.c' || echo '$(srcdir)/'`src/crypto/aes-eax.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-eax.Tpo $(DEPDIR)/aes-eax.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-eax.c' object='aes-eax.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-eax.lo `test -f 'src/crypto/aes-eax.c' || echo '$(srcdir)/'`src/crypto/aes-eax.c
 -
 -aes-encblock.lo: src/crypto/aes-encblock.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-encblock.lo -MD -MP -MF $(DEPDIR)/aes-encblock.Tpo -c -o aes-encblock.lo `test -f 'src/crypto/aes-encblock.c' || echo '$(srcdir)/'`src/crypto/aes-encblock.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-encblock.Tpo $(DEPDIR)/aes-encblock.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-encblock.c' object='aes-encblock.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-encblock.lo `test -f 'src/crypto/aes-encblock.c' || echo '$(srcdir)/'`src/crypto/aes-encblock.c
 -
 -aes-internal.lo: src/crypto/aes-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal.lo -MD -MP -MF $(DEPDIR)/aes-internal.Tpo -c -o aes-internal.lo `test -f 'src/crypto/aes-internal.c' || echo '$(srcdir)/'`src/crypto/aes-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal.Tpo $(DEPDIR)/aes-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal.c' object='aes-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal.lo `test -f 'src/crypto/aes-internal.c' || echo '$(srcdir)/'`src/crypto/aes-internal.c
 -
 -aes-internal-dec.lo: src/crypto/aes-internal-dec.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal-dec.lo -MD -MP -MF $(DEPDIR)/aes-internal-dec.Tpo -c -o aes-internal-dec.lo `test -f 'src/crypto/aes-internal-dec.c' || echo '$(srcdir)/'`src/crypto/aes-internal-dec.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal-dec.Tpo $(DEPDIR)/aes-internal-dec.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal-dec.c' object='aes-internal-dec.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal-dec.lo `test -f 'src/crypto/aes-internal-dec.c' || echo '$(srcdir)/'`src/crypto/aes-internal-dec.c
 -
 -aes-internal-enc.lo: src/crypto/aes-internal-enc.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal-enc.lo -MD -MP -MF $(DEPDIR)/aes-internal-enc.Tpo -c -o aes-internal-enc.lo `test -f 'src/crypto/aes-internal-enc.c' || echo '$(srcdir)/'`src/crypto/aes-internal-enc.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal-enc.Tpo $(DEPDIR)/aes-internal-enc.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal-enc.c' object='aes-internal-enc.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal-enc.lo `test -f 'src/crypto/aes-internal-enc.c' || echo '$(srcdir)/'`src/crypto/aes-internal-enc.c
 -
 -aes-omac1.lo: src/crypto/aes-omac1.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-omac1.lo -MD -MP -MF $(DEPDIR)/aes-omac1.Tpo -c -o aes-omac1.lo `test -f 'src/crypto/aes-omac1.c' || echo '$(srcdir)/'`src/crypto/aes-omac1.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-omac1.Tpo $(DEPDIR)/aes-omac1.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-omac1.c' object='aes-omac1.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-omac1.lo `test -f 'src/crypto/aes-omac1.c' || echo '$(srcdir)/'`src/crypto/aes-omac1.c
 -
 -aes-unwrap.lo: src/crypto/aes-unwrap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-unwrap.lo -MD -MP -MF $(DEPDIR)/aes-unwrap.Tpo -c -o aes-unwrap.lo `test -f 'src/crypto/aes-unwrap.c' || echo '$(srcdir)/'`src/crypto/aes-unwrap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-unwrap.Tpo $(DEPDIR)/aes-unwrap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-unwrap.c' object='aes-unwrap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-unwrap.lo `test -f 'src/crypto/aes-unwrap.c' || echo '$(srcdir)/'`src/crypto/aes-unwrap.c
 -
 -aes-wrap.lo: src/crypto/aes-wrap.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-wrap.lo -MD -MP -MF $(DEPDIR)/aes-wrap.Tpo -c -o aes-wrap.lo `test -f 'src/crypto/aes-wrap.c' || echo '$(srcdir)/'`src/crypto/aes-wrap.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-wrap.Tpo $(DEPDIR)/aes-wrap.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-wrap.c' object='aes-wrap.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-wrap.lo `test -f 'src/crypto/aes-wrap.c' || echo '$(srcdir)/'`src/crypto/aes-wrap.c
 -
 -des-internal.lo: src/crypto/des-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT des-internal.lo -MD -MP -MF $(DEPDIR)/des-internal.Tpo -c -o des-internal.lo `test -f 'src/crypto/des-internal.c' || echo '$(srcdir)/'`src/crypto/des-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/des-internal.Tpo $(DEPDIR)/des-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/des-internal.c' object='des-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o des-internal.lo `test -f 'src/crypto/des-internal.c' || echo '$(srcdir)/'`src/crypto/des-internal.c
 -
 -dh_group5.lo: src/crypto/dh_group5.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dh_group5.lo -MD -MP -MF $(DEPDIR)/dh_group5.Tpo -c -o dh_group5.lo `test -f 'src/crypto/dh_group5.c' || echo '$(srcdir)/'`src/crypto/dh_group5.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/dh_group5.Tpo $(DEPDIR)/dh_group5.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/dh_group5.c' object='dh_group5.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dh_group5.lo `test -f 'src/crypto/dh_group5.c' || echo '$(srcdir)/'`src/crypto/dh_group5.c
 -
 -dh_groups.lo: src/crypto/dh_groups.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dh_groups.lo -MD -MP -MF $(DEPDIR)/dh_groups.Tpo -c -o dh_groups.lo `test -f 'src/crypto/dh_groups.c' || echo '$(srcdir)/'`src/crypto/dh_groups.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/dh_groups.Tpo $(DEPDIR)/dh_groups.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/dh_groups.c' object='dh_groups.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dh_groups.lo `test -f 'src/crypto/dh_groups.c' || echo '$(srcdir)/'`src/crypto/dh_groups.c
 -
 -md4-internal.lo: src/crypto/md4-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md4-internal.lo -MD -MP -MF $(DEPDIR)/md4-internal.Tpo -c -o md4-internal.lo `test -f 'src/crypto/md4-internal.c' || echo '$(srcdir)/'`src/crypto/md4-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md4-internal.Tpo $(DEPDIR)/md4-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md4-internal.c' object='md4-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md4-internal.lo `test -f 'src/crypto/md4-internal.c' || echo '$(srcdir)/'`src/crypto/md4-internal.c
 -
 -md5.lo: src/crypto/md5.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5.lo -MD -MP -MF $(DEPDIR)/md5.Tpo -c -o md5.lo `test -f 'src/crypto/md5.c' || echo '$(srcdir)/'`src/crypto/md5.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5.Tpo $(DEPDIR)/md5.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5.c' object='md5.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5.lo `test -f 'src/crypto/md5.c' || echo '$(srcdir)/'`src/crypto/md5.c
 -
 -md5-internal.lo: src/crypto/md5-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5-internal.lo -MD -MP -MF $(DEPDIR)/md5-internal.Tpo -c -o md5-internal.lo `test -f 'src/crypto/md5-internal.c' || echo '$(srcdir)/'`src/crypto/md5-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5-internal.Tpo $(DEPDIR)/md5-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5-internal.c' object='md5-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5-internal.lo `test -f 'src/crypto/md5-internal.c' || echo '$(srcdir)/'`src/crypto/md5-internal.c
 -
 -md5-non-fips.lo: src/crypto/md5-non-fips.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5-non-fips.lo -MD -MP -MF $(DEPDIR)/md5-non-fips.Tpo -c -o md5-non-fips.lo `test -f 'src/crypto/md5-non-fips.c' || echo '$(srcdir)/'`src/crypto/md5-non-fips.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5-non-fips.Tpo $(DEPDIR)/md5-non-fips.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5-non-fips.c' object='md5-non-fips.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5-non-fips.lo `test -f 'src/crypto/md5-non-fips.c' || echo '$(srcdir)/'`src/crypto/md5-non-fips.c
 -
 -milenage.lo: src/crypto/milenage.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT milenage.lo -MD -MP -MF $(DEPDIR)/milenage.Tpo -c -o milenage.lo `test -f 'src/crypto/milenage.c' || echo '$(srcdir)/'`src/crypto/milenage.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/milenage.Tpo $(DEPDIR)/milenage.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/milenage.c' object='milenage.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o milenage.lo `test -f 'src/crypto/milenage.c' || echo '$(srcdir)/'`src/crypto/milenage.c
 -
 -ms_funcs.lo: src/crypto/ms_funcs.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ms_funcs.lo -MD -MP -MF $(DEPDIR)/ms_funcs.Tpo -c -o ms_funcs.lo `test -f 'src/crypto/ms_funcs.c' || echo '$(srcdir)/'`src/crypto/ms_funcs.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/ms_funcs.Tpo $(DEPDIR)/ms_funcs.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/ms_funcs.c' object='ms_funcs.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ms_funcs.lo `test -f 'src/crypto/ms_funcs.c' || echo '$(srcdir)/'`src/crypto/ms_funcs.c
 -
 -rc4.lo: src/crypto/rc4.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rc4.lo -MD -MP -MF $(DEPDIR)/rc4.Tpo -c -o rc4.lo `test -f 'src/crypto/rc4.c' || echo '$(srcdir)/'`src/crypto/rc4.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/rc4.Tpo $(DEPDIR)/rc4.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/rc4.c' object='rc4.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rc4.lo `test -f 'src/crypto/rc4.c' || echo '$(srcdir)/'`src/crypto/rc4.c
 -
 -sha1.lo: src/crypto/sha1.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1.lo -MD -MP -MF $(DEPDIR)/sha1.Tpo -c -o sha1.lo `test -f 'src/crypto/sha1.c' || echo '$(srcdir)/'`src/crypto/sha1.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1.Tpo $(DEPDIR)/sha1.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1.c' object='sha1.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1.lo `test -f 'src/crypto/sha1.c' || echo '$(srcdir)/'`src/crypto/sha1.c
 -
 -sha1-internal.lo: src/crypto/sha1-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-internal.lo -MD -MP -MF $(DEPDIR)/sha1-internal.Tpo -c -o sha1-internal.lo `test -f 'src/crypto/sha1-internal.c' || echo '$(srcdir)/'`src/crypto/sha1-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-internal.Tpo $(DEPDIR)/sha1-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-internal.c' object='sha1-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-internal.lo `test -f 'src/crypto/sha1-internal.c' || echo '$(srcdir)/'`src/crypto/sha1-internal.c
 -
 -sha1-pbkdf2.lo: src/crypto/sha1-pbkdf2.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-pbkdf2.lo -MD -MP -MF $(DEPDIR)/sha1-pbkdf2.Tpo -c -o sha1-pbkdf2.lo `test -f 'src/crypto/sha1-pbkdf2.c' || echo '$(srcdir)/'`src/crypto/sha1-pbkdf2.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-pbkdf2.Tpo $(DEPDIR)/sha1-pbkdf2.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-pbkdf2.c' object='sha1-pbkdf2.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-pbkdf2.lo `test -f 'src/crypto/sha1-pbkdf2.c' || echo '$(srcdir)/'`src/crypto/sha1-pbkdf2.c
 -
 -sha1-tlsprf.lo: src/crypto/sha1-tlsprf.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-tlsprf.lo -MD -MP -MF $(DEPDIR)/sha1-tlsprf.Tpo -c -o sha1-tlsprf.lo `test -f 'src/crypto/sha1-tlsprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tlsprf.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-tlsprf.Tpo $(DEPDIR)/sha1-tlsprf.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-tlsprf.c' object='sha1-tlsprf.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-tlsprf.lo `test -f 'src/crypto/sha1-tlsprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tlsprf.c
 -
 -sha1-tprf.lo: src/crypto/sha1-tprf.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-tprf.lo -MD -MP -MF $(DEPDIR)/sha1-tprf.Tpo -c -o sha1-tprf.lo `test -f 'src/crypto/sha1-tprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tprf.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-tprf.Tpo $(DEPDIR)/sha1-tprf.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-tprf.c' object='sha1-tprf.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-tprf.lo `test -f 'src/crypto/sha1-tprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tprf.c
 -
 -sha256.lo: src/crypto/sha256.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha256.lo -MD -MP -MF $(DEPDIR)/sha256.Tpo -c -o sha256.lo `test -f 'src/crypto/sha256.c' || echo '$(srcdir)/'`src/crypto/sha256.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha256.Tpo $(DEPDIR)/sha256.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha256.c' object='sha256.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha256.lo `test -f 'src/crypto/sha256.c' || echo '$(srcdir)/'`src/crypto/sha256.c
 -
 -sha256-internal.lo: src/crypto/sha256-internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha256-internal.lo -MD -MP -MF $(DEPDIR)/sha256-internal.Tpo -c -o sha256-internal.lo `test -f 'src/crypto/sha256-internal.c' || echo '$(srcdir)/'`src/crypto/sha256-internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha256-internal.Tpo $(DEPDIR)/sha256-internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha256-internal.c' object='sha256-internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha256-internal.lo `test -f 'src/crypto/sha256-internal.c' || echo '$(srcdir)/'`src/crypto/sha256-internal.c
 -
 -crypto_internal.lo: src/crypto/crypto_internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal.lo -MD -MP -MF $(DEPDIR)/crypto_internal.Tpo -c -o crypto_internal.lo `test -f 'src/crypto/crypto_internal.c' || echo '$(srcdir)/'`src/crypto/crypto_internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal.Tpo $(DEPDIR)/crypto_internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal.c' object='crypto_internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal.lo `test -f 'src/crypto/crypto_internal.c' || echo '$(srcdir)/'`src/crypto/crypto_internal.c
 -
 -crypto_internal-cipher.lo: src/crypto/crypto_internal-cipher.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-cipher.lo -MD -MP -MF $(DEPDIR)/crypto_internal-cipher.Tpo -c -o crypto_internal-cipher.lo `test -f 'src/crypto/crypto_internal-cipher.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-cipher.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-cipher.Tpo $(DEPDIR)/crypto_internal-cipher.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-cipher.c' object='crypto_internal-cipher.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-cipher.lo `test -f 'src/crypto/crypto_internal-cipher.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-cipher.c
 -
 -crypto_internal-modexp.lo: src/crypto/crypto_internal-modexp.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-modexp.lo -MD -MP -MF $(DEPDIR)/crypto_internal-modexp.Tpo -c -o crypto_internal-modexp.lo `test -f 'src/crypto/crypto_internal-modexp.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-modexp.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-modexp.Tpo $(DEPDIR)/crypto_internal-modexp.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-modexp.c' object='crypto_internal-modexp.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-modexp.lo `test -f 'src/crypto/crypto_internal-modexp.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-modexp.c
 -
 -crypto_internal-rsa.lo: src/crypto/crypto_internal-rsa.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-rsa.lo -MD -MP -MF $(DEPDIR)/crypto_internal-rsa.Tpo -c -o crypto_internal-rsa.lo `test -f 'src/crypto/crypto_internal-rsa.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-rsa.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-rsa.Tpo $(DEPDIR)/crypto_internal-rsa.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-rsa.c' object='crypto_internal-rsa.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-rsa.lo `test -f 'src/crypto/crypto_internal-rsa.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-rsa.c
 -
 -tls_internal.lo: src/crypto/tls_internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tls_internal.lo -MD -MP -MF $(DEPDIR)/tls_internal.Tpo -c -o tls_internal.lo `test -f 'src/crypto/tls_internal.c' || echo '$(srcdir)/'`src/crypto/tls_internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tls_internal.Tpo $(DEPDIR)/tls_internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/tls_internal.c' object='tls_internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tls_internal.lo `test -f 'src/crypto/tls_internal.c' || echo '$(srcdir)/'`src/crypto/tls_internal.c
 -
 -fips_prf_internal.lo: src/crypto/fips_prf_internal.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fips_prf_internal.lo -MD -MP -MF $(DEPDIR)/fips_prf_internal.Tpo -c -o fips_prf_internal.lo `test -f 'src/crypto/fips_prf_internal.c' || echo '$(srcdir)/'`src/crypto/fips_prf_internal.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/fips_prf_internal.Tpo $(DEPDIR)/fips_prf_internal.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/fips_prf_internal.c' object='fips_prf_internal.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fips_prf_internal.lo `test -f 'src/crypto/fips_prf_internal.c' || echo '$(srcdir)/'`src/crypto/fips_prf_internal.c
 -
 -asn1.lo: src/tls/asn1.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT asn1.lo -MD -MP -MF $(DEPDIR)/asn1.Tpo -c -o asn1.lo `test -f 'src/tls/asn1.c' || echo '$(srcdir)/'`src/tls/asn1.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/asn1.Tpo $(DEPDIR)/asn1.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/asn1.c' object='asn1.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o asn1.lo `test -f 'src/tls/asn1.c' || echo '$(srcdir)/'`src/tls/asn1.c
 -
 -bignum.lo: src/tls/bignum.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bignum.lo -MD -MP -MF $(DEPDIR)/bignum.Tpo -c -o bignum.lo `test -f 'src/tls/bignum.c' || echo '$(srcdir)/'`src/tls/bignum.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/bignum.Tpo $(DEPDIR)/bignum.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/bignum.c' object='bignum.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bignum.lo `test -f 'src/tls/bignum.c' || echo '$(srcdir)/'`src/tls/bignum.c
 -
 -pkcs1.lo: src/tls/pkcs1.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs1.lo -MD -MP -MF $(DEPDIR)/pkcs1.Tpo -c -o pkcs1.lo `test -f 'src/tls/pkcs1.c' || echo '$(srcdir)/'`src/tls/pkcs1.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs1.Tpo $(DEPDIR)/pkcs1.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs1.c' object='pkcs1.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs1.lo `test -f 'src/tls/pkcs1.c' || echo '$(srcdir)/'`src/tls/pkcs1.c
 -
 -pkcs5.lo: src/tls/pkcs5.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs5.lo -MD -MP -MF $(DEPDIR)/pkcs5.Tpo -c -o pkcs5.lo `test -f 'src/tls/pkcs5.c' || echo '$(srcdir)/'`src/tls/pkcs5.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs5.Tpo $(DEPDIR)/pkcs5.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs5.c' object='pkcs5.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs5.lo `test -f 'src/tls/pkcs5.c' || echo '$(srcdir)/'`src/tls/pkcs5.c
 -
 -pkcs8.lo: src/tls/pkcs8.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs8.lo -MD -MP -MF $(DEPDIR)/pkcs8.Tpo -c -o pkcs8.lo `test -f 'src/tls/pkcs8.c' || echo '$(srcdir)/'`src/tls/pkcs8.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs8.Tpo $(DEPDIR)/pkcs8.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs8.c' object='pkcs8.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs8.lo `test -f 'src/tls/pkcs8.c' || echo '$(srcdir)/'`src/tls/pkcs8.c
 -
 -rsa.lo: src/tls/rsa.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rsa.lo -MD -MP -MF $(DEPDIR)/rsa.Tpo -c -o rsa.lo `test -f 'src/tls/rsa.c' || echo '$(srcdir)/'`src/tls/rsa.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/rsa.Tpo $(DEPDIR)/rsa.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/rsa.c' object='rsa.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rsa.lo `test -f 'src/tls/rsa.c' || echo '$(srcdir)/'`src/tls/rsa.c
 -
 -tlsv1_client.lo: src/tls/tlsv1_client.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client.lo -MD -MP -MF $(DEPDIR)/tlsv1_client.Tpo -c -o tlsv1_client.lo `test -f 'src/tls/tlsv1_client.c' || echo '$(srcdir)/'`src/tls/tlsv1_client.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client.Tpo $(DEPDIR)/tlsv1_client.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client.c' object='tlsv1_client.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client.lo `test -f 'src/tls/tlsv1_client.c' || echo '$(srcdir)/'`src/tls/tlsv1_client.c
 -
 -tlsv1_client_read.lo: src/tls/tlsv1_client_read.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client_read.lo -MD -MP -MF $(DEPDIR)/tlsv1_client_read.Tpo -c -o tlsv1_client_read.lo `test -f 'src/tls/tlsv1_client_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_read.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client_read.Tpo $(DEPDIR)/tlsv1_client_read.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client_read.c' object='tlsv1_client_read.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client_read.lo `test -f 'src/tls/tlsv1_client_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_read.c
 -
 -tlsv1_client_write.lo: src/tls/tlsv1_client_write.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client_write.lo -MD -MP -MF $(DEPDIR)/tlsv1_client_write.Tpo -c -o tlsv1_client_write.lo `test -f 'src/tls/tlsv1_client_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_write.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client_write.Tpo $(DEPDIR)/tlsv1_client_write.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client_write.c' object='tlsv1_client_write.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client_write.lo `test -f 'src/tls/tlsv1_client_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_write.c
 -
 -tlsv1_common.lo: src/tls/tlsv1_common.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_common.lo -MD -MP -MF $(DEPDIR)/tlsv1_common.Tpo -c -o tlsv1_common.lo `test -f 'src/tls/tlsv1_common.c' || echo '$(srcdir)/'`src/tls/tlsv1_common.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_common.Tpo $(DEPDIR)/tlsv1_common.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_common.c' object='tlsv1_common.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_common.lo `test -f 'src/tls/tlsv1_common.c' || echo '$(srcdir)/'`src/tls/tlsv1_common.c
 -
 -tlsv1_cred.lo: src/tls/tlsv1_cred.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_cred.lo -MD -MP -MF $(DEPDIR)/tlsv1_cred.Tpo -c -o tlsv1_cred.lo `test -f 'src/tls/tlsv1_cred.c' || echo '$(srcdir)/'`src/tls/tlsv1_cred.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_cred.Tpo $(DEPDIR)/tlsv1_cred.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_cred.c' object='tlsv1_cred.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_cred.lo `test -f 'src/tls/tlsv1_cred.c' || echo '$(srcdir)/'`src/tls/tlsv1_cred.c
 -
 -tlsv1_record.lo: src/tls/tlsv1_record.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_record.lo -MD -MP -MF $(DEPDIR)/tlsv1_record.Tpo -c -o tlsv1_record.lo `test -f 'src/tls/tlsv1_record.c' || echo '$(srcdir)/'`src/tls/tlsv1_record.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_record.Tpo $(DEPDIR)/tlsv1_record.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_record.c' object='tlsv1_record.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_record.lo `test -f 'src/tls/tlsv1_record.c' || echo '$(srcdir)/'`src/tls/tlsv1_record.c
 -
 -tlsv1_server.lo: src/tls/tlsv1_server.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server.lo -MD -MP -MF $(DEPDIR)/tlsv1_server.Tpo -c -o tlsv1_server.lo `test -f 'src/tls/tlsv1_server.c' || echo '$(srcdir)/'`src/tls/tlsv1_server.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server.Tpo $(DEPDIR)/tlsv1_server.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server.c' object='tlsv1_server.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server.lo `test -f 'src/tls/tlsv1_server.c' || echo '$(srcdir)/'`src/tls/tlsv1_server.c
 -
 -tlsv1_server_read.lo: src/tls/tlsv1_server_read.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server_read.lo -MD -MP -MF $(DEPDIR)/tlsv1_server_read.Tpo -c -o tlsv1_server_read.lo `test -f 'src/tls/tlsv1_server_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_read.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server_read.Tpo $(DEPDIR)/tlsv1_server_read.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server_read.c' object='tlsv1_server_read.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server_read.lo `test -f 'src/tls/tlsv1_server_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_read.c
 -
 -tlsv1_server_write.lo: src/tls/tlsv1_server_write.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server_write.lo -MD -MP -MF $(DEPDIR)/tlsv1_server_write.Tpo -c -o tlsv1_server_write.lo `test -f 'src/tls/tlsv1_server_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_write.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server_write.Tpo $(DEPDIR)/tlsv1_server_write.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server_write.c' object='tlsv1_server_write.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server_write.lo `test -f 'src/tls/tlsv1_server_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_write.c
 -
 -x509v3.lo: src/tls/x509v3.c
 -@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT x509v3.lo -MD -MP -MF $(DEPDIR)/x509v3.Tpo -c -o x509v3.lo `test -f 'src/tls/x509v3.c' || echo '$(srcdir)/'`src/tls/x509v3.c
 -@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/x509v3.Tpo $(DEPDIR)/x509v3.Plo
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/x509v3.c' object='x509v3.lo' libtool=yes @AMDEPBACKSLASH@
 -@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 -@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o x509v3.lo `test -f 'src/tls/x509v3.c' || echo '$(srcdir)/'`src/tls/x509v3.c
 +config.h: stamp-h1
 +      @if test ! -f $@; then \
 +        rm -f stamp-h1; \
 +        $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 +      else :; fi
 +
 +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 +      @rm -f stamp-h1
 +      cd $(top_builddir) && $(SHELL) ./config.status config.h
- $(srcdir)/config.h.in:  $(am__configure_deps) 
++$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
 +      ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 +      rm -f stamp-h1
 +      touch $@
 +
 +distclean-hdr:
 +      -rm -f config.h stamp-h1
++mech_eap.spec: $(top_builddir)/config.status $(srcdir)/mech_eap.spec.in
++      cd $(top_builddir) && $(SHELL) ./config.status $@
  
  mostlyclean-libtool:
        -rm -f *.lo

diff --cc aclocal.m4
index c8f002a,0000000..7c659b8
mode 100644,000000..100644
--- 1/aclocal.m4
--- /dev/null
+++ b/aclocal.m4
@@@ -1,8918 -1,0 +1,998 @@@
- # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
- #
- #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
- #                 2006, 2007, 2008 Free Software Foundation, Inc.
- #   Written by Gordon Matzigkeit, 1996
- #
- # This file is free software; the Free Software Foundation gives
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
- 
- m4_define([_LT_COPYING], [dnl
- #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
- #                 2006, 2007, 2008 Free Software Foundation, Inc.
- #   Written by Gordon Matzigkeit, 1996
- #
- #   This file is part of GNU Libtool.
- #
- # GNU Libtool is free software; you can redistribute it and/or
- # modify it under the terms of the GNU General Public License as
- # published by the Free Software Foundation; either version 2 of
- # the License, or (at your option) any later version.
- #
- # As a special exception to the GNU General Public License,
- # if you distribute this file as part of a program or library that
- # is built using GNU Libtool, you may include this file under the
- # same distribution terms that you use for the rest of that program.
- #
- # GNU Libtool is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- # GNU General Public License for more details.
- #
- # You should have received a copy of the GNU General Public License
- # along with GNU Libtool; see the file COPYING.  If not, a copy
- # can be downloaded from http://www.gnu.org/licenses/gpl.html, or
- # obtained by writing to the Free Software Foundation, Inc.,
- # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- ])
- 
- # serial 56 LT_INIT
- 
- 
- # LT_PREREQ(VERSION)
- # ------------------
- # Complain and exit if this libtool version is less that VERSION.
- m4_defun([LT_PREREQ],
- [m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-        [m4_default([$3],
-                  [m4_fatal([Libtool version $1 or higher is required],
-                            63)])],
-        [$2])])
- 
- 
- # _LT_CHECK_BUILDDIR
- # ------------------
- # Complain if the absolute build directory name contains unusual characters
- m4_defun([_LT_CHECK_BUILDDIR],
- [case `pwd` in
-   *\ * | *\   *)
-     AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
- esac
- ])
- 
- 
- # LT_INIT([OPTIONS])
- # ------------------
- AC_DEFUN([LT_INIT],
- [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
- AC_BEFORE([$0], [LT_LANG])dnl
- AC_BEFORE([$0], [LT_OUTPUT])dnl
- AC_BEFORE([$0], [LTDL_INIT])dnl
- m4_require([_LT_CHECK_BUILDDIR])dnl
- 
- dnl Autoconf doesn't catch unexpanded LT_ macros by default:
- m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
- dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
- dnl unless we require an AC_DEFUNed macro:
- AC_REQUIRE([LTOPTIONS_VERSION])dnl
- AC_REQUIRE([LTSUGAR_VERSION])dnl
- AC_REQUIRE([LTVERSION_VERSION])dnl
- AC_REQUIRE([LTOBSOLETE_VERSION])dnl
- m4_require([_LT_PROG_LTMAIN])dnl
- 
- dnl Parse OPTIONS
- _LT_SET_OPTIONS([$0], [$1])
- 
- # This can be used to rebuild libtool when needed
- LIBTOOL_DEPS="$ltmain"
- 
- # Always use our own libtool.
- LIBTOOL='$(SHELL) $(top_builddir)/libtool'
- AC_SUBST(LIBTOOL)dnl
- 
- _LT_SETUP
- 
- # Only expand once:
- m4_define([LT_INIT])
- ])# LT_INIT
- 
- # Old names:
- AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
- AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
- dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
- 
- 
- # _LT_CC_BASENAME(CC)
- # -------------------
- # Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
- m4_defun([_LT_CC_BASENAME],
- [for cc_temp in $1""; do
-   case $cc_temp in
-     compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-     distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-     \-*) ;;
-     *) break;;
-   esac
- done
- cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
- ])
- 
- 
- # _LT_FILEUTILS_DEFAULTS
- # ----------------------
- # It is okay to use these file commands and assume they have been set
- # sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
- m4_defun([_LT_FILEUTILS_DEFAULTS],
- [: ${CP="cp -f"}
- : ${MV="mv -f"}
- : ${RM="rm -f"}
- ])# _LT_FILEUTILS_DEFAULTS
- 
- 
- # _LT_SETUP
- # ---------
- m4_defun([_LT_SETUP],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- AC_REQUIRE([AC_CANONICAL_BUILD])dnl
- _LT_DECL([], [host_alias], [0], [The host system])dnl
- _LT_DECL([], [host], [0])dnl
- _LT_DECL([], [host_os], [0])dnl
- dnl
- _LT_DECL([], [build_alias], [0], [The build system])dnl
- _LT_DECL([], [build], [0])dnl
- _LT_DECL([], [build_os], [0])dnl
- dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([LT_PATH_LD])dnl
- AC_REQUIRE([LT_PATH_NM])dnl
- dnl
- AC_REQUIRE([AC_PROG_LN_S])dnl
- test -z "$LN_S" && LN_S="ln -s"
- _LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
- dnl
- AC_REQUIRE([LT_CMD_MAX_LEN])dnl
- _LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
- _LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
- dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_CHECK_SHELL_FEATURES])dnl
- m4_require([_LT_CMD_RELOAD])dnl
- m4_require([_LT_CHECK_MAGIC_METHOD])dnl
- m4_require([_LT_CMD_OLD_ARCHIVE])dnl
- m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
- 
- _LT_CONFIG_LIBTOOL_INIT([
- # See if we are running on zsh, and set the options which allow our
- # commands through without removal of \ escapes INIT.
- if test -n "\${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
- fi
- ])
- if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
- fi
- 
- _LT_CHECK_OBJDIR
- 
- m4_require([_LT_TAG_COMPILER])dnl
- _LT_PROG_ECHO_BACKSLASH
- 
- case $host_os in
- aix3*)
-   # AIX sometimes has problems with the GCC collect2 program.  For some
-   # reason, if we set the COLLECT_NAMES environment variable, the problems
-   # vanish in a puff of smoke.
-   if test "X${COLLECT_NAMES+set}" != Xset; then
-     COLLECT_NAMES=
-     export COLLECT_NAMES
-   fi
-   ;;
- esac
- 
- # Sed substitution that helps us do robust quoting.  It backslashifies
- # metacharacters that are still active within double-quoted strings.
- sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
- 
- # Same as above, but do not quote variable references.
- double_quote_subst='s/\([["`\\]]\)/\\\1/g'
- 
- # Sed substitution to delay expansion of an escaped shell variable in a
- # double_quote_subst'ed string.
- delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
- 
- # Sed substitution to delay expansion of an escaped single quote.
- delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
- 
- # Sed substitution to avoid accidental globbing in evaled expressions
- no_glob_subst='s/\*/\\\*/g'
- 
- # Global variables:
- ofile=libtool
- can_build_shared=yes
- 
- # All known linkers require a `.a' archive for static linking (except MSVC,
- # which needs '.lib').
- libext=a
- 
- with_gnu_ld="$lt_cv_prog_gnu_ld"
- 
- old_CC="$CC"
- old_CFLAGS="$CFLAGS"
- 
- # Set sane defaults for various variables
- test -z "$CC" && CC=cc
- test -z "$LTCC" && LTCC=$CC
- test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
- test -z "$LD" && LD=ld
- test -z "$ac_objext" && ac_objext=o
- 
- _LT_CC_BASENAME([$compiler])
- 
- # Only perform the check for file, if the check method requires it
- test -z "$MAGIC_CMD" && MAGIC_CMD=file
- case $deplibs_check_method in
- file_magic*)
-   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-     _LT_PATH_MAGIC
-   fi
-   ;;
- esac
- 
- # Use C for the default configuration in the libtool script
- LT_SUPPORTED_TAG([CC])
- _LT_LANG_C_CONFIG
- _LT_LANG_DEFAULT_CONFIG
- _LT_CONFIG_COMMANDS
- ])# _LT_SETUP
- 
- 
- # _LT_PROG_LTMAIN
- # ---------------
- # Note that this code is called both from `configure', and `config.status'
- # now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
- # `config.status' has no value for ac_aux_dir unless we are using Automake,
- # so we pass a copy along to make sure it has a sensible value anyway.
- m4_defun([_LT_PROG_LTMAIN],
- [m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
- _LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
- ltmain="$ac_aux_dir/ltmain.sh"
- ])# _LT_PROG_LTMAIN
- 
- 
- 
- # So that we can recreate a full libtool script including additional
- # tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
- # in macros and then make a single call at the end using the `libtool'
- # label.
- 
- 
- # _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
- # ----------------------------------------
- # Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
- m4_define([_LT_CONFIG_LIBTOOL_INIT],
- [m4_ifval([$1],
-           [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                      [$1
- ])])])
- 
- # Initialize.
- m4_define([_LT_OUTPUT_LIBTOOL_INIT])
- 
- 
- # _LT_CONFIG_LIBTOOL([COMMANDS])
- # ------------------------------
- # Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
- m4_define([_LT_CONFIG_LIBTOOL],
- [m4_ifval([$1],
-           [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                      [$1
- ])])])
- 
- # Initialize.
- m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
- 
- 
- # _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
- # -----------------------------------------------------
- m4_defun([_LT_CONFIG_SAVE_COMMANDS],
- [_LT_CONFIG_LIBTOOL([$1])
- _LT_CONFIG_LIBTOOL_INIT([$2])
- ])
- 
- 
- # _LT_FORMAT_COMMENT([COMMENT])
- # -----------------------------
- # Add leading comment marks to the start of each line, and a trailing
- # full-stop to the whole comment if one is not present already.
- m4_define([_LT_FORMAT_COMMENT],
- [m4_ifval([$1], [
- m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-               [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
- )])
- 
- 
- 
- 
- 
- # _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
- # -------------------------------------------------------------------
- # CONFIGNAME is the name given to the value in the libtool script.
- # VARNAME is the (base) name used in the configure script.
- # VALUE may be 0, 1 or 2 for a computed quote escaped value based on
- # VARNAME.  Any other value will be used directly.
- m4_define([_LT_DECL],
- [lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-     [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-       [m4_ifval([$1], [$1], [$2])])
-     lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-     m4_ifval([$4],
-       [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-     lt_dict_add_subkey([lt_decl_dict], [$2],
-       [tagged?], [m4_ifval([$5], [yes], [no])])])
- ])
- 
- 
- # _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
- # --------------------------------------------------------
- m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
- 
- 
- # lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
- # ------------------------------------------------
- m4_define([lt_decl_tag_varnames],
- [_lt_decl_filter([tagged?], [yes], $@)])
- 
- 
- # _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
- # ---------------------------------------------------------
- m4_define([_lt_decl_filter],
- [m4_case([$#],
-   [0], [m4_fatal([$0: too few arguments: $#])],
-   [1], [m4_fatal([$0: too few arguments: $#: $1])],
-   [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-   [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-   [lt_dict_filter([lt_decl_dict], $@)])[]dnl
- ])
- 
- 
- # lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
- # --------------------------------------------------
- m4_define([lt_decl_quote_varnames],
- [_lt_decl_filter([value], [1], $@)])
- 
- 
- # lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
- # ---------------------------------------------------
- m4_define([lt_decl_dquote_varnames],
- [_lt_decl_filter([value], [2], $@)])
- 
- 
- # lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
- # ---------------------------------------------------
- m4_define([lt_decl_varnames_tagged],
- [m4_assert([$# <= 2])dnl
- _$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-     m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
- m4_define([_lt_decl_varnames_tagged],
- [m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
- 
- 
- # lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
- # ------------------------------------------------
- m4_define([lt_decl_all_varnames],
- [_$0(m4_quote(m4_default([$1], [[, ]])),
-      m4_if([$2], [],
-          m4_quote(lt_decl_varnames),
-       m4_quote(m4_shift($@))))[]dnl
- ])
- m4_define([_lt_decl_all_varnames],
- [lt_join($@, lt_decl_varnames_tagged([$1],
-                       lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
- ])
- 
- 
- # _LT_CONFIG_STATUS_DECLARE([VARNAME])
- # ------------------------------------
- # Quote a variable value, and forward it to `config.status' so that its
- # declaration there will have the same value as in `configure'.  VARNAME
- # must have a single quote delimited value for this to work.
- m4_define([_LT_CONFIG_STATUS_DECLARE],
- [$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
- 
- 
- # _LT_CONFIG_STATUS_DECLARATIONS
- # ------------------------------
- # We delimit libtool config variables with single quotes, so when
- # we write them to config.status, we have to be sure to quote all
- # embedded single quotes properly.  In configure, this macro expands
- # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
- #
- #    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
- m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
- [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
- 
- 
- # _LT_LIBTOOL_TAGS
- # ----------------
- # Output comment and list of tags supported by the script
- m4_defun([_LT_LIBTOOL_TAGS],
- [_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
- available_tags="_LT_TAGS"dnl
- ])
- 
- 
- # _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
- # -----------------------------------
- # Extract the dictionary values for VARNAME (optionally with TAG) and
- # expand to a commented shell variable setting:
- #
- #    # Some comment about what VAR is for.
- #    visible_name=$lt_internal_name
- m4_define([_LT_LIBTOOL_DECLARE],
- [_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-                                          [description])))[]dnl
- m4_pushdef([_libtool_name],
-     m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
- m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-     [0], [_libtool_name=[$]$1],
-     [1], [_libtool_name=$lt_[]$1],
-     [2], [_libtool_name=$lt_[]$1],
-     [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
- m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
- ])
- 
- 
- # _LT_LIBTOOL_CONFIG_VARS
- # -----------------------
- # Produce commented declarations of non-tagged libtool config variables
- # suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
- # script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
- # section) are produced by _LT_LIBTOOL_TAG_VARS.
- m4_defun([_LT_LIBTOOL_CONFIG_VARS],
- [m4_foreach([_lt_var],
-     m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-     [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
- 
- 
- # _LT_LIBTOOL_TAG_VARS(TAG)
- # -------------------------
- m4_define([_LT_LIBTOOL_TAG_VARS],
- [m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-     [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
- 
- 
- # _LT_TAGVAR(VARNAME, [TAGNAME])
- # ------------------------------
- m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
- 
- 
- # _LT_CONFIG_COMMANDS
- # -------------------
- # Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
- # variables for single and double quote escaping we saved from calls
- # to _LT_DECL, we can put quote escaped variables declarations
- # into `config.status', and then the shell code to quote escape them in
- # for loops in `config.status'.  Finally, any additional code accumulated
- # from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
- m4_defun([_LT_CONFIG_COMMANDS],
- [AC_PROVIDE_IFELSE([LT_OUTPUT],
-       dnl If the libtool generation code has been placed in $CONFIG_LT,
-       dnl instead of duplicating it all over again into config.status,
-       dnl then we will have config.status run $CONFIG_LT later, so it
-       dnl needs to know what name is stored there:
-         [AC_CONFIG_COMMANDS([libtool],
-             [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-     dnl If the libtool generation code is destined for config.status,
-     dnl expand the accumulated commands and init code now:
-     [AC_CONFIG_COMMANDS([libtool],
-         [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
- ])#_LT_CONFIG_COMMANDS
- 
- 
- # Initialize.
- m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
- [
- 
- # The HP-UX ksh and POSIX shell print the target directory to stdout
- # if CDPATH is set.
- (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
- 
- sed_quote_subst='$sed_quote_subst'
- double_quote_subst='$double_quote_subst'
- delay_variable_subst='$delay_variable_subst'
- _LT_CONFIG_STATUS_DECLARATIONS
- LTCC='$LTCC'
- LTCFLAGS='$LTCFLAGS'
- compiler='$compiler_DEFAULT'
- 
- # Quote evaled strings.
- for var in lt_decl_all_varnames([[ \
- ]], lt_decl_quote_varnames); do
-     case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-     *[[\\\\\\\`\\"\\\$]]*)
-       eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-       ;;
-     *)
-       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-       ;;
-     esac
- done
- 
- # Double-quote double-evaled strings.
- for var in lt_decl_all_varnames([[ \
- ]], lt_decl_dquote_varnames); do
-     case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-     *[[\\\\\\\`\\"\\\$]]*)
-       eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-       ;;
-     *)
-       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-       ;;
-     esac
- done
- 
- # Fix-up fallback echo if it was mangled by the above quoting rules.
- case \$lt_ECHO in
- *'\\\[$]0 --fallback-echo"')dnl "
-   lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-   ;;
- esac
- 
- _LT_OUTPUT_LIBTOOL_INIT
- ])
- 
- 
- # LT_OUTPUT
- # ---------
- # This macro allows early generation of the libtool script (before
- # AC_OUTPUT is called), incase it is used in configure for compilation
- # tests.
- AC_DEFUN([LT_OUTPUT],
- [: ${CONFIG_LT=./config.lt}
- AC_MSG_NOTICE([creating $CONFIG_LT])
- cat >"$CONFIG_LT" <<_LTEOF
- #! $SHELL
- # Generated by $as_me.
- # Run this file to recreate a libtool stub with the current configuration.
- 
- lt_cl_silent=false
- SHELL=\${CONFIG_SHELL-$SHELL}
- _LTEOF
- 
- cat >>"$CONFIG_LT" <<\_LTEOF
- AS_SHELL_SANITIZE
- _AS_PREPARE
- 
- exec AS_MESSAGE_FD>&1
- exec AS_MESSAGE_LOG_FD>>config.log
- {
-   echo
-   AS_BOX([Running $as_me.])
- } >&AS_MESSAGE_LOG_FD
- 
- lt_cl_help="\
- \`$as_me' creates a local libtool stub from the current configuration,
- for use in further configure time tests before the real libtool is
- generated.
- 
- Usage: $[0] [[OPTIONS]]
- 
-   -h, --help      print this help, then exit
-   -V, --version   print version number, then exit
-   -q, --quiet     do not print progress messages
-   -d, --debug     don't remove temporary files
- 
- Report bugs to <bug-libtool@gnu.org>."
- 
- lt_cl_version="\
- m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
- m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
- configured by $[0], generated by m4_PACKAGE_STRING.
- 
- Copyright (C) 2008 Free Software Foundation, Inc.
- This config.lt script is free software; the Free Software Foundation
- gives unlimited permision to copy, distribute and modify it."
- 
- while test $[#] != 0
- do
-   case $[1] in
-     --version | --v* | -V )
-       echo "$lt_cl_version"; exit 0 ;;
-     --help | --h* | -h )
-       echo "$lt_cl_help"; exit 0 ;;
-     --debug | --d* | -d )
-       debug=: ;;
-     --quiet | --q* | --silent | --s* | -q )
-       lt_cl_silent=: ;;
- 
-     -*) AC_MSG_ERROR([unrecognized option: $[1]
- Try \`$[0] --help' for more information.]) ;;
- 
-     *) AC_MSG_ERROR([unrecognized argument: $[1]
- Try \`$[0] --help' for more information.]) ;;
-   esac
-   shift
- done
- 
- if $lt_cl_silent; then
-   exec AS_MESSAGE_FD>/dev/null
- fi
- _LTEOF
- 
- cat >>"$CONFIG_LT" <<_LTEOF
- _LT_OUTPUT_LIBTOOL_COMMANDS_INIT
- _LTEOF
- 
- cat >>"$CONFIG_LT" <<\_LTEOF
- AC_MSG_NOTICE([creating $ofile])
- _LT_OUTPUT_LIBTOOL_COMMANDS
- AS_EXIT(0)
- _LTEOF
- chmod +x "$CONFIG_LT"
- 
- # configure is writing to config.log, but config.lt does its own redirection,
- # appending to config.log, which fails on DOS, as config.log is still kept
- # open by configure.  Here we exec the FD to /dev/null, effectively closing
- # config.log, so it can be properly (re)opened and appended to by config.lt.
- if test "$no_create" != yes; then
-   lt_cl_success=:
-   test "$silent" = yes &&
-     lt_config_lt_args="$lt_config_lt_args --quiet"
-   exec AS_MESSAGE_LOG_FD>/dev/null
-   $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-   exec AS_MESSAGE_LOG_FD>>config.log
-   $lt_cl_success || AS_EXIT(1)
- fi
- ])# LT_OUTPUT
- 
- 
- # _LT_CONFIG(TAG)
- # ---------------
- # If TAG is the built-in tag, create an initial libtool script with a
- # default configuration from the untagged config vars.  Otherwise add code
- # to config.status for appending the configuration named by TAG from the
- # matching tagged config vars.
- m4_defun([_LT_CONFIG],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- _LT_CONFIG_SAVE_COMMANDS([
-   m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-   m4_if(_LT_TAG, [C], [
-     # See if we are running on zsh, and set the options which allow our
-     # commands through without removal of \ escapes.
-     if test -n "${ZSH_VERSION+set}" ; then
-       setopt NO_GLOB_SUBST
-     fi
- 
-     cfgfile="${ofile}T"
-     trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-     $RM "$cfgfile"
- 
-     cat <<_LT_EOF >> "$cfgfile"
- #! $SHELL
- 
- # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
- # Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
- # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
- #
- _LT_COPYING
- _LT_LIBTOOL_TAGS
- 
- # ### BEGIN LIBTOOL CONFIG
- _LT_LIBTOOL_CONFIG_VARS
- _LT_LIBTOOL_TAG_VARS
- # ### END LIBTOOL CONFIG
- 
- _LT_EOF
- 
-   case $host_os in
-   aix3*)
-     cat <<\_LT_EOF >> "$cfgfile"
- # AIX sometimes has problems with the GCC collect2 program.  For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
-   COLLECT_NAMES=
-   export COLLECT_NAMES
- fi
- _LT_EOF
-     ;;
-   esac
- 
-   _LT_PROG_LTMAIN
- 
-   # We use sed instead of cat because bash on DJGPP gets confused if
-   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-   # text mode, it properly converts lines to CR/LF.  This bash problem
-   # is reportedly fixed, but why not run on old versions too?
-   sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
- 
-   _LT_PROG_XSI_SHELLFNS
- 
-   sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-     || (rm -f "$cfgfile"; exit 1)
- 
-   mv -f "$cfgfile" "$ofile" ||
-     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-   chmod +x "$ofile"
- ],
- [cat <<_LT_EOF >> "$ofile"
- 
- dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
- dnl in a comment (ie after a #).
- # ### BEGIN LIBTOOL TAG CONFIG: $1
- _LT_LIBTOOL_TAG_VARS(_LT_TAG)
- # ### END LIBTOOL TAG CONFIG: $1
- _LT_EOF
- ])dnl /m4_if
- ],
- [m4_if([$1], [], [
-     PACKAGE='$PACKAGE'
-     VERSION='$VERSION'
-     TIMESTAMP='$TIMESTAMP'
-     RM='$RM'
-     ofile='$ofile'], [])
- ])dnl /_LT_CONFIG_SAVE_COMMANDS
- ])# _LT_CONFIG
- 
- 
- # LT_SUPPORTED_TAG(TAG)
- # ---------------------
- # Trace this macro to discover what tags are supported by the libtool
- # --tag option, using:
- #    autoconf --trace 'LT_SUPPORTED_TAG:$1'
- AC_DEFUN([LT_SUPPORTED_TAG], [])
- 
- 
- # C support is built-in for now
- m4_define([_LT_LANG_C_enabled], [])
- m4_define([_LT_TAGS], [])
- 
- 
- # LT_LANG(LANG)
- # -------------
- # Enable libtool support for the given language if not already enabled.
- AC_DEFUN([LT_LANG],
- [AC_BEFORE([$0], [LT_OUTPUT])dnl
- m4_case([$1],
-   [C],                        [_LT_LANG(C)],
-   [C++],              [_LT_LANG(CXX)],
-   [Java],             [_LT_LANG(GCJ)],
-   [Fortran 77],               [_LT_LANG(F77)],
-   [Fortran],          [_LT_LANG(FC)],
-   [Windows Resource], [_LT_LANG(RC)],
-   [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-     [_LT_LANG($1)],
-     [m4_fatal([$0: unsupported language: "$1"])])])dnl
- ])# LT_LANG
- 
- 
- # _LT_LANG(LANGNAME)
- # ------------------
- m4_defun([_LT_LANG],
- [m4_ifdef([_LT_LANG_]$1[_enabled], [],
-   [LT_SUPPORTED_TAG([$1])dnl
-   m4_append([_LT_TAGS], [$1 ])dnl
-   m4_define([_LT_LANG_]$1[_enabled], [])dnl
-   _LT_LANG_$1_CONFIG($1)])dnl
- ])# _LT_LANG
- 
- 
- # _LT_LANG_DEFAULT_CONFIG
- # -----------------------
- m4_defun([_LT_LANG_DEFAULT_CONFIG],
- [AC_PROVIDE_IFELSE([AC_PROG_CXX],
-   [LT_LANG(CXX)],
-   [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
- 
- AC_PROVIDE_IFELSE([AC_PROG_F77],
-   [LT_LANG(F77)],
-   [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
- 
- AC_PROVIDE_IFELSE([AC_PROG_FC],
-   [LT_LANG(FC)],
-   [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
- 
- dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
- dnl pulling things in needlessly.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-   [LT_LANG(GCJ)],
-   [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-     [LT_LANG(GCJ)],
-     [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-       [LT_LANG(GCJ)],
-       [m4_ifdef([AC_PROG_GCJ],
-       [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-        m4_ifdef([A][M_PROG_GCJ],
-       [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-        m4_ifdef([LT_PROG_GCJ],
-       [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
- 
- AC_PROVIDE_IFELSE([LT_PROG_RC],
-   [LT_LANG(RC)],
-   [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
- ])# _LT_LANG_DEFAULT_CONFIG
- 
- # Obsolete macros:
- AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
- AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
- AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
- AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
- dnl AC_DEFUN([AC_LIBTOOL_F77], [])
- dnl AC_DEFUN([AC_LIBTOOL_FC], [])
- dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
- 
- 
- # _LT_TAG_COMPILER
- # ----------------
- m4_defun([_LT_TAG_COMPILER],
- [AC_REQUIRE([AC_PROG_CC])dnl
- 
- _LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
- _LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
- _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
- _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
- 
- # If no C compiler was specified, use CC.
- LTCC=${LTCC-"$CC"}
- 
- # If no C compiler flags were specified, use CFLAGS.
- LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
- 
- # Allow CC to be a program name with arguments.
- compiler=$CC
- ])# _LT_TAG_COMPILER
- 
- 
- # _LT_COMPILER_BOILERPLATE
- # ------------------------
- # Check for compiler boilerplate output or warnings with
- # the simple compiler test code.
- m4_defun([_LT_COMPILER_BOILERPLATE],
- [m4_require([_LT_DECL_SED])dnl
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" >conftest.$ac_ext
- eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
- _lt_compiler_boilerplate=`cat conftest.err`
- $RM conftest*
- ])# _LT_COMPILER_BOILERPLATE
- 
- 
- # _LT_LINKER_BOILERPLATE
- # ----------------------
- # Check for linker boilerplate output or warnings with
- # the simple link test code.
- m4_defun([_LT_LINKER_BOILERPLATE],
- [m4_require([_LT_DECL_SED])dnl
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_link_test_code" >conftest.$ac_ext
- eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
- _lt_linker_boilerplate=`cat conftest.err`
- $RM -r conftest*
- ])# _LT_LINKER_BOILERPLATE
- 
- # _LT_REQUIRED_DARWIN_CHECKS
- # -------------------------
- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-   case $host_os in
-     rhapsody* | darwin*)
-     AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-     AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-     AC_CHECK_TOOL([LIPO], [lipo], [:])
-     AC_CHECK_TOOL([OTOOL], [otool], [:])
-     AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-     _LT_DECL([], [DSYMUTIL], [1],
-       [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-     _LT_DECL([], [NMEDIT], [1],
-       [Tool to change global to local symbols on Mac OS X])
-     _LT_DECL([], [LIPO], [1],
-       [Tool to manipulate fat objects and archives on Mac OS X])
-     _LT_DECL([], [OTOOL], [1],
-       [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-     _LT_DECL([], [OTOOL64], [1],
-       [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
- 
-     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-       [lt_cv_apple_cc_single_mod=no
-       if test -z "${LT_MULTI_MODULE}"; then
-       # By default we will add the -single_module flag. You can override
-       # by either setting the environment variable LT_MULTI_MODULE
-       # non-empty at configure time, or by adding -multi_module to the
-       # link flags.
-       rm -rf libconftest.dylib*
-       echo "int foo(void){return 1;}" > conftest.c
-       echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-       $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-         -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-         _lt_result=$?
-       if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-         lt_cv_apple_cc_single_mod=yes
-       else
-         cat conftest.err >&AS_MESSAGE_LOG_FD
-       fi
-       rm -rf libconftest.dylib*
-       rm -f conftest.*
-       fi])
-     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-       [lt_cv_ld_exported_symbols_list],
-       [lt_cv_ld_exported_symbols_list=no
-       save_LDFLAGS=$LDFLAGS
-       echo "_main" > conftest.sym
-       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-       [lt_cv_ld_exported_symbols_list=yes],
-       [lt_cv_ld_exported_symbols_list=no])
-       LDFLAGS="$save_LDFLAGS"
-     ])
-     case $host_os in
-     rhapsody* | darwin1.[[012]])
-       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-     darwin1.*)
-       _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-     darwin*) # darwin 5.x on
-       # if running on 10.5 or later, the deployment target defaults
-       # to the OS version, if on x86, and 10.4, the deployment
-       # target defaults to 10.4. Don't you love it?
-       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-       10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-       10.[[012]]*)
-         _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-       10.*)
-         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-       esac
-     ;;
-   esac
-     if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-       _lt_dar_single_mod='$single_module'
-     fi
-     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-     else
-       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-     fi
-     if test "$DSYMUTIL" != ":"; then
-       _lt_dsymutil='~$DSYMUTIL $lib || :'
-     else
-       _lt_dsymutil=
-     fi
-     ;;
-   esac
- ])
- 
- 
- # _LT_DARWIN_LINKER_FEATURES
- # --------------------------
- # Checks for linker and compiler features on darwin
- m4_defun([_LT_DARWIN_LINKER_FEATURES],
- [
-   m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-   _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-   _LT_TAGVAR(hardcode_direct, $1)=no
-   _LT_TAGVAR(hardcode_automatic, $1)=yes
-   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-   _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-   _LT_TAGVAR(link_all_deplibs, $1)=yes
-   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-   case $cc_basename in
-      ifort*) _lt_dar_can_shared=yes ;;
-      *) _lt_dar_can_shared=$GCC ;;
-   esac
-   if test "$_lt_dar_can_shared" = "yes"; then
-     output_verbose_link_cmd=echo
-     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-     _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-     m4_if([$1], [CXX],
- [   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-       _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-       _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-     fi
- ],[])
-   else
-   _LT_TAGVAR(ld_shlibs, $1)=no
-   fi
- ])
- 
- # _LT_SYS_MODULE_PATH_AIX
- # -----------------------
- # Links a minimal program and checks the executable
- # for the system default hardcoded library path. In most cases,
- # this is /usr/lib:/lib, but when the MPI compilers are used
- # the location of the communication and MPI libs are included too.
- # If we don't find anything, use the default library path according
- # to the aix ld manual.
- m4_defun([_LT_SYS_MODULE_PATH_AIX],
- [m4_require([_LT_DECL_SED])dnl
- AC_LINK_IFELSE(AC_LANG_PROGRAM,[
- lt_aix_libpath_sed='
-     /Import File Strings/,/^$/ {
-       /^0/ {
-           s/^0  *\(.*\)$/\1/
-           p
-       }
-     }'
- aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$aix_libpath"; then
-   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi],[])
- if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
- ])# _LT_SYS_MODULE_PATH_AIX
- 
- 
- # _LT_SHELL_INIT(ARG)
- # -------------------
- m4_define([_LT_SHELL_INIT],
- [ifdef([AC_DIVERSION_NOTICE],
-            [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-        [AC_DIVERT_PUSH(NOTICE)])
- $1
- AC_DIVERT_POP
- ])# _LT_SHELL_INIT
- 
- 
- # _LT_PROG_ECHO_BACKSLASH
- # -----------------------
- # Add some code to the start of the generated configure script which
- # will find an echo command which doesn't interpret backslashes.
- m4_defun([_LT_PROG_ECHO_BACKSLASH],
- [_LT_SHELL_INIT([
- # Check that we are running under the correct shell.
- SHELL=${CONFIG_SHELL-/bin/sh}
- 
- case X$lt_ECHO in
- X*--fallback-echo)
-   # Remove one level of quotation (which was required for Make).
-   ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-   ;;
- esac
- 
- ECHO=${lt_ECHO-echo}
- if test "X[$]1" = X--no-reexec; then
-   # Discard the --no-reexec flag, and continue.
-   shift
- elif test "X[$]1" = X--fallback-echo; then
-   # Avoid inline document here, it may be left over
-   :
- elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-   # Yippee, $ECHO works!
-   :
- else
-   # Restart under the correct shell.
-   exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
- fi
- 
- if test "X[$]1" = X--fallback-echo; then
-   # used as fallback echo
-   shift
-   cat <<_LT_EOF
- [$]*
- _LT_EOF
-   exit 0
- fi
- 
- # The HP-UX ksh and POSIX shell print the target directory to stdout
- # if CDPATH is set.
- (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
- 
- if test -z "$lt_ECHO"; then
-   if test "X${echo_test_string+set}" != Xset; then
-     # find a string as large as possible, as long as the shell can cope with it
-     for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-       # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-       if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-        { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-       then
-         break
-       fi
-     done
-   fi
- 
-   if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-      echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-      test "X$echo_testing_string" = "X$echo_test_string"; then
-     :
-   else
-     # The Solaris, AIX, and Digital Unix default echo programs unquote
-     # backslashes.  This makes it impossible to quote backslashes using
-     #   echo "$something" | sed 's/\\/\\\\/g'
-     #
-     # So, first we look for a working echo in the user's PATH.
- 
-     lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-     for dir in $PATH /usr/ucb; do
-       IFS="$lt_save_ifs"
-       if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-          test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-          echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-         ECHO="$dir/echo"
-         break
-       fi
-     done
-     IFS="$lt_save_ifs"
- 
-     if test "X$ECHO" = Xecho; then
-       # We didn't find a better echo, so look for alternatives.
-       if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-          echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-         # This shell has a builtin print -r that does the trick.
-         ECHO='print -r'
-       elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-          test "X$CONFIG_SHELL" != X/bin/ksh; then
-         # If we have ksh, try running configure again with it.
-         ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-         export ORIGINAL_CONFIG_SHELL
-         CONFIG_SHELL=/bin/ksh
-         export CONFIG_SHELL
-         exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-       else
-         # Try using printf.
-         ECHO='printf %s\n'
-         if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-          echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-          test "X$echo_testing_string" = "X$echo_test_string"; then
-         # Cool, printf works
-         :
-         elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-            test "X$echo_testing_string" = 'X\t' &&
-            echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-            test "X$echo_testing_string" = "X$echo_test_string"; then
-         CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-         export CONFIG_SHELL
-         SHELL="$CONFIG_SHELL"
-         export SHELL
-         ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-         elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-            test "X$echo_testing_string" = 'X\t' &&
-            echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-            test "X$echo_testing_string" = "X$echo_test_string"; then
-         ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-         else
-         # maybe with a smaller string...
-         prev=:
- 
-         for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-           if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-           then
-             break
-           fi
-           prev="$cmd"
-         done
- 
-         if test "$prev" != 'sed 50q "[$]0"'; then
-           echo_test_string=`eval $prev`
-           export echo_test_string
-           exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-         else
-           # Oops.  We lost completely, so just stick with echo.
-           ECHO=echo
-         fi
-         fi
-       fi
-     fi
-   fi
- fi
- 
- # Copy echo and quote the copy suitably for passing to libtool from
- # the Makefile, instead of quoting the original, which is used later.
- lt_ECHO=$ECHO
- if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-    lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
- fi
- 
- AC_SUBST(lt_ECHO)
- ])
- _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
- _LT_DECL([], [ECHO], [1],
-     [An echo program that does not interpret backslashes])
- ])# _LT_PROG_ECHO_BACKSLASH
- 
- 
- # _LT_ENABLE_LOCK
- # ---------------
- m4_defun([_LT_ENABLE_LOCK],
- [AC_ARG_ENABLE([libtool-lock],
-   [AS_HELP_STRING([--disable-libtool-lock],
-     [avoid locking (might break parallel builds)])])
- test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
- 
- # Some flags need to be propagated to the compiler or linker for good
- # libtool support.
- case $host in
- ia64-*-hpux*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if AC_TRY_EVAL(ac_compile); then
-     case `/usr/bin/file conftest.$ac_objext` in
-       *ELF-32*)
-       HPUX_IA64_MODE="32"
-       ;;
-       *ELF-64*)
-       HPUX_IA64_MODE="64"
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- *-*-irix6*)
-   # Find out which ABI we are using.
-   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-   if AC_TRY_EVAL(ac_compile); then
-     if test "$lt_cv_prog_gnu_ld" = yes; then
-       case `/usr/bin/file conftest.$ac_objext` in
-       *32-bit*)
-         LD="${LD-ld} -melf32bsmip"
-         ;;
-       *N32*)
-         LD="${LD-ld} -melf32bmipn32"
-         ;;
-       *64-bit*)
-         LD="${LD-ld} -melf64bmip"
-       ;;
-       esac
-     else
-       case `/usr/bin/file conftest.$ac_objext` in
-       *32-bit*)
-         LD="${LD-ld} -32"
-         ;;
-       *N32*)
-         LD="${LD-ld} -n32"
-         ;;
-       *64-bit*)
-         LD="${LD-ld} -64"
-         ;;
-       esac
-     fi
-   fi
-   rm -rf conftest*
-   ;;
- 
- x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
- s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if AC_TRY_EVAL(ac_compile); then
-     case `/usr/bin/file conftest.o` in
-       *32-bit*)
-       case $host in
-         x86_64-*kfreebsd*-gnu)
-           LD="${LD-ld} -m elf_i386_fbsd"
-           ;;
-         x86_64-*linux*)
-           LD="${LD-ld} -m elf_i386"
-           ;;
-         ppc64-*linux*|powerpc64-*linux*)
-           LD="${LD-ld} -m elf32ppclinux"
-           ;;
-         s390x-*linux*)
-           LD="${LD-ld} -m elf_s390"
-           ;;
-         sparc64-*linux*)
-           LD="${LD-ld} -m elf32_sparc"
-           ;;
-       esac
-       ;;
-       *64-bit*)
-       case $host in
-         x86_64-*kfreebsd*-gnu)
-           LD="${LD-ld} -m elf_x86_64_fbsd"
-           ;;
-         x86_64-*linux*)
-           LD="${LD-ld} -m elf_x86_64"
-           ;;
-         ppc*-*linux*|powerpc*-*linux*)
-           LD="${LD-ld} -m elf64ppc"
-           ;;
-         s390*-*linux*|s390*-*tpf*)
-           LD="${LD-ld} -m elf64_s390"
-           ;;
-         sparc*-*linux*)
-           LD="${LD-ld} -m elf64_sparc"
-           ;;
-       esac
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- 
- *-*-sco3.2v5*)
-   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-   SAVE_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS -belf"
-   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-     [AC_LANG_PUSH(C)
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-      AC_LANG_POP])
-   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-     CFLAGS="$SAVE_CFLAGS"
-   fi
-   ;;
- sparc*-*solaris*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if AC_TRY_EVAL(ac_compile); then
-     case `/usr/bin/file conftest.o` in
-     *64-bit*)
-       case $lt_cv_prog_gnu_ld in
-       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-       *)
-       if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-         LD="${LD-ld} -64"
-       fi
-       ;;
-       esac
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- esac
- 
- need_locks="$enable_libtool_lock"
- ])# _LT_ENABLE_LOCK
- 
- 
- # _LT_CMD_OLD_ARCHIVE
- # -------------------
- m4_defun([_LT_CMD_OLD_ARCHIVE],
- [AC_CHECK_TOOL(AR, ar, false)
- test -z "$AR" && AR=ar
- test -z "$AR_FLAGS" && AR_FLAGS=cru
- _LT_DECL([], [AR], [1], [The archiver])
- _LT_DECL([], [AR_FLAGS], [1])
- 
- AC_CHECK_TOOL(STRIP, strip, :)
- test -z "$STRIP" && STRIP=:
- _LT_DECL([], [STRIP], [1], [A symbol stripping program])
- 
- AC_CHECK_TOOL(RANLIB, ranlib, :)
- test -z "$RANLIB" && RANLIB=:
- _LT_DECL([], [RANLIB], [1],
-     [Commands used to install an old-style archive])
- 
- # Determine commands to create old-style static archives.
- old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
- old_postinstall_cmds='chmod 644 $oldlib'
- old_postuninstall_cmds=
- 
- if test -n "$RANLIB"; then
-   case $host_os in
-   openbsd*)
-     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-     ;;
-   *)
-     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-     ;;
-   esac
-   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
- fi
- _LT_DECL([], [old_postinstall_cmds], [2])
- _LT_DECL([], [old_postuninstall_cmds], [2])
- _LT_TAGDECL([], [old_archive_cmds], [2],
-     [Commands used to build an old-style archive])
- ])# _LT_CMD_OLD_ARCHIVE
- 
- 
- # _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
- #             [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
- # ----------------------------------------------------------------
- # Check whether the given compiler option works
- AC_DEFUN([_LT_COMPILER_OPTION],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_SED])dnl
- AC_CACHE_CHECK([$1], [$2],
-   [$2=no
-    m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-    lt_compiler_flag="$3"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    # The option is referenced via a variable to avoid confusing sed.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-    (eval "$lt_compile" 2>conftest.err)
-    ac_status=$?
-    cat conftest.err >&AS_MESSAGE_LOG_FD
-    echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-    if (exit $ac_status) && test -s "$ac_outfile"; then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings other than the usual output.
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-        $2=yes
-      fi
-    fi
-    $RM conftest*
- ])
- 
- if test x"[$]$2" = xyes; then
-     m4_if([$5], , :, [$5])
- else
-     m4_if([$6], , :, [$6])
- fi
- ])# _LT_COMPILER_OPTION
- 
- # Old name:
- AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
- 
- 
- # _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
- #                  [ACTION-SUCCESS], [ACTION-FAILURE])
- # ----------------------------------------------------
- # Check whether the given linker option works
- AC_DEFUN([_LT_LINKER_OPTION],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_SED])dnl
- AC_CACHE_CHECK([$1], [$2],
-   [$2=no
-    save_LDFLAGS="$LDFLAGS"
-    LDFLAGS="$LDFLAGS $3"
-    echo "$lt_simple_link_test_code" > conftest.$ac_ext
-    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-      # The linker can only warn and ignore the option if not recognized
-      # So say no if there are warnings
-      if test -s conftest.err; then
-        # Append any errors to the config.log.
-        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-        $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-        if diff conftest.exp conftest.er2 >/dev/null; then
-          $2=yes
-        fi
-      else
-        $2=yes
-      fi
-    fi
-    $RM -r conftest*
-    LDFLAGS="$save_LDFLAGS"
- ])
- 
- if test x"[$]$2" = xyes; then
-     m4_if([$4], , :, [$4])
- else
-     m4_if([$5], , :, [$5])
- fi
- ])# _LT_LINKER_OPTION
- 
- # Old name:
- AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
- 
- 
- # LT_CMD_MAX_LEN
- #---------------
- AC_DEFUN([LT_CMD_MAX_LEN],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- # find the maximum length of command line arguments
- AC_MSG_CHECKING([the maximum length of command line arguments])
- AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-   i=0
-   teststring="ABCD"
- 
-   case $build_os in
-   msdosdjgpp*)
-     # On DJGPP, this test can blow up pretty badly due to problems in libc
-     # (any single argument exceeding 2000 bytes causes a buffer overrun
-     # during glob expansion).  Even if it were fixed, the result of this
-     # check would be larger than it should be.
-     lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-     ;;
- 
-   gnu*)
-     # Under GNU Hurd, this test is not required because there is
-     # no limit to the length of command line arguments.
-     # Libtool will interpret -1 as no limit whatsoever
-     lt_cv_sys_max_cmd_len=-1;
-     ;;
- 
-   cygwin* | mingw* | cegcc*)
-     # On Win9x/ME, this test blows up -- it succeeds, but takes
-     # about 5 minutes as the teststring grows exponentially.
-     # Worse, since 9x/ME are not pre-emptively multitasking,
-     # you end up with a "frozen" computer, even though with patience
-     # the test eventually succeeds (with a max line length of 256k).
-     # Instead, let's just punt: use the minimum linelength reported by
-     # all of the supported platforms: 8192 (on NT/2K/XP).
-     lt_cv_sys_max_cmd_len=8192;
-     ;;
- 
-   amigaos*)
-     # On AmigaOS with pdksh, this test takes hours, literally.
-     # So we just punt and use a minimum line length of 8192.
-     lt_cv_sys_max_cmd_len=8192;
-     ;;
- 
-   netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-     # This has been around since 386BSD, at least.  Likely further.
-     if test -x /sbin/sysctl; then
-       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-     elif test -x /usr/sbin/sysctl; then
-       lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-     else
-       lt_cv_sys_max_cmd_len=65536     # usable default for all BSDs
-     fi
-     # And add a safety zone
-     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-     ;;
- 
-   interix*)
-     # We know the value 262144 and hardcode it with a safety zone (like BSD)
-     lt_cv_sys_max_cmd_len=196608
-     ;;
- 
-   osf*)
-     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-     # nice to cause kernel panics so lets avoid the loop below.
-     # First set a reasonable default.
-     lt_cv_sys_max_cmd_len=16384
-     #
-     if test -x /sbin/sysconfig; then
-       case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-         *1*) lt_cv_sys_max_cmd_len=-1 ;;
-       esac
-     fi
-     ;;
-   sco3.2v5*)
-     lt_cv_sys_max_cmd_len=102400
-     ;;
-   sysv5* | sco5v6* | sysv4.2uw2*)
-     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-     if test -n "$kargmax"; then
-       lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[       ]]//'`
-     else
-       lt_cv_sys_max_cmd_len=32768
-     fi
-     ;;
-   *)
-     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-     if test -n "$lt_cv_sys_max_cmd_len"; then
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-     else
-       # Make teststring a little bigger before we do anything with it.
-       # a 1K string should be a reasonable start.
-       for i in 1 2 3 4 5 6 7 8 ; do
-         teststring=$teststring$teststring
-       done
-       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-       # If test is not a shell built-in, we'll probably end up computing a
-       # maximum length that is only half of the actual maximum length, but
-       # we can't tell.
-       while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-                = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-             test $i != 17 # 1/2 MB should be enough
-       do
-         i=`expr $i + 1`
-         teststring=$teststring$teststring
-       done
-       # Only check the string length outside the loop.
-       lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-       teststring=
-       # Add a significant safety factor because C++ compilers can tack on
-       # massive amounts of additional arguments before passing them to the
-       # linker.  It appears as though 1/2 is a usable value.
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-     fi
-     ;;
-   esac
- ])
- if test -n $lt_cv_sys_max_cmd_len ; then
-   AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
- else
-   AC_MSG_RESULT(none)
- fi
- max_cmd_len=$lt_cv_sys_max_cmd_len
- _LT_DECL([], [max_cmd_len], [0],
-     [What is the maximum length of a command?])
- ])# LT_CMD_MAX_LEN
- 
- # Old name:
- AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
- 
- 
- # _LT_HEADER_DLFCN
- # ----------------
- m4_defun([_LT_HEADER_DLFCN],
- [AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
- ])# _LT_HEADER_DLFCN
- 
- 
- # _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
- #                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
- # ----------------------------------------------------------------
- m4_defun([_LT_TRY_DLOPEN_SELF],
- [m4_require([_LT_HEADER_DLFCN])dnl
- if test "$cross_compiling" = yes; then :
-   [$4]
- else
-   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-   lt_status=$lt_dlunknown
-   cat > conftest.$ac_ext <<_LT_EOF
- [#line __oline__ "configure"
- #include "confdefs.h"
- 
- #if HAVE_DLFCN_H
- #include <dlfcn.h>
- #endif
- 
- #include <stdio.h>
- 
- #ifdef RTLD_GLOBAL
- #  define LT_DLGLOBAL         RTLD_GLOBAL
- #else
- #  ifdef DL_GLOBAL
- #    define LT_DLGLOBAL               DL_GLOBAL
- #  else
- #    define LT_DLGLOBAL               0
- #  endif
- #endif
- 
- /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-    find out it does not work in some platform. */
- #ifndef LT_DLLAZY_OR_NOW
- #  ifdef RTLD_LAZY
- #    define LT_DLLAZY_OR_NOW          RTLD_LAZY
- #  else
- #    ifdef DL_LAZY
- #      define LT_DLLAZY_OR_NOW                DL_LAZY
- #    else
- #      ifdef RTLD_NOW
- #        define LT_DLLAZY_OR_NOW      RTLD_NOW
- #      else
- #        ifdef DL_NOW
- #          define LT_DLLAZY_OR_NOW    DL_NOW
- #        else
- #          define LT_DLLAZY_OR_NOW    0
- #        endif
- #      endif
- #    endif
- #  endif
- #endif
- 
- void fnord() { int i=42;}
- int main ()
- {
-   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-   int status = $lt_dlunknown;
- 
-   if (self)
-     {
-       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-       /* dlclose (self); */
-     }
-   else
-     puts (dlerror ());
- 
-   return status;
- }]
- _LT_EOF
-   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-     lt_status=$?
-     case x$lt_status in
-       x$lt_dlno_uscore) $1 ;;
-       x$lt_dlneed_uscore) $2 ;;
-       x$lt_dlunknown|x*) $3 ;;
-     esac
-   else :
-     # compilation failed
-     $3
-   fi
- fi
- rm -fr conftest*
- ])# _LT_TRY_DLOPEN_SELF
- 
- 
- # LT_SYS_DLOPEN_SELF
- # ------------------
- AC_DEFUN([LT_SYS_DLOPEN_SELF],
- [m4_require([_LT_HEADER_DLFCN])dnl
- if test "x$enable_dlopen" != xyes; then
-   enable_dlopen=unknown
-   enable_dlopen_self=unknown
-   enable_dlopen_self_static=unknown
- else
-   lt_cv_dlopen=no
-   lt_cv_dlopen_libs=
- 
-   case $host_os in
-   beos*)
-     lt_cv_dlopen="load_add_on"
-     lt_cv_dlopen_libs=
-     lt_cv_dlopen_self=yes
-     ;;
- 
-   mingw* | pw32* | cegcc*)
-     lt_cv_dlopen="LoadLibrary"
-     lt_cv_dlopen_libs=
-     ;;
- 
-   cygwin*)
-     lt_cv_dlopen="dlopen"
-     lt_cv_dlopen_libs=
-     ;;
- 
-   darwin*)
-   # if libdl is installed we need to link against it
-     AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-     lt_cv_dlopen="dyld"
-     lt_cv_dlopen_libs=
-     lt_cv_dlopen_self=yes
-     ])
-     ;;
- 
-   *)
-     AC_CHECK_FUNC([shl_load],
-         [lt_cv_dlopen="shl_load"],
-       [AC_CHECK_LIB([dld], [shl_load],
-           [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-       [AC_CHECK_FUNC([dlopen],
-             [lt_cv_dlopen="dlopen"],
-         [AC_CHECK_LIB([dl], [dlopen],
-               [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-           [AC_CHECK_LIB([svld], [dlopen],
-                 [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-             [AC_CHECK_LIB([dld], [dld_link],
-                   [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-             ])
-           ])
-         ])
-       ])
-       ])
-     ;;
-   esac
- 
-   if test "x$lt_cv_dlopen" != xno; then
-     enable_dlopen=yes
-   else
-     enable_dlopen=no
-   fi
- 
-   case $lt_cv_dlopen in
-   dlopen)
-     save_CPPFLAGS="$CPPFLAGS"
-     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- 
-     save_LDFLAGS="$LDFLAGS"
-     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- 
-     save_LIBS="$LIBS"
-     LIBS="$lt_cv_dlopen_libs $LIBS"
- 
-     AC_CACHE_CHECK([whether a program can dlopen itself],
-         lt_cv_dlopen_self, [dnl
-         _LT_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-           lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-     ])
- 
-     if test "x$lt_cv_dlopen_self" = xyes; then
-       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-         lt_cv_dlopen_self_static, [dnl
-         _LT_TRY_DLOPEN_SELF(
-           lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-           lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-       ])
-     fi
- 
-     CPPFLAGS="$save_CPPFLAGS"
-     LDFLAGS="$save_LDFLAGS"
-     LIBS="$save_LIBS"
-     ;;
-   esac
- 
-   case $lt_cv_dlopen_self in
-   yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-   *) enable_dlopen_self=unknown ;;
-   esac
- 
-   case $lt_cv_dlopen_self_static in
-   yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-   *) enable_dlopen_self_static=unknown ;;
-   esac
- fi
- _LT_DECL([dlopen_support], [enable_dlopen], [0],
-        [Whether dlopen is supported])
- _LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-        [Whether dlopen of programs is supported])
- _LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-        [Whether dlopen of statically linked programs is supported])
- ])# LT_SYS_DLOPEN_SELF
- 
- # Old name:
- AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
- 
- 
- # _LT_COMPILER_C_O([TAGNAME])
- # ---------------------------
- # Check to see if options -c and -o are simultaneously supported by compiler.
- # This macro does not hard code the compiler like AC_PROG_CC_C_O.
- m4_defun([_LT_COMPILER_C_O],
- [m4_require([_LT_DECL_SED])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_TAG_COMPILER])dnl
- AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-   [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-   [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-    $RM -r conftest 2>/dev/null
-    mkdir conftest
-    cd conftest
-    mkdir out
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- 
-    lt_compiler_flag="-o out/conftest2.$ac_objext"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-    (eval "$lt_compile" 2>out/conftest.err)
-    ac_status=$?
-    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-    echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-    if (exit $ac_status) && test -s out/conftest2.$ac_objext
-    then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-      fi
-    fi
-    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-    $RM conftest*
-    # SGI C++ compiler will create directory out/ii_files/ for
-    # template instantiation
-    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-    $RM out/* && rmdir out
-    cd ..
-    $RM -r conftest
-    $RM conftest*
- ])
- _LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-       [Does compiler simultaneously support -c and -o options?])
- ])# _LT_COMPILER_C_O
- 
- 
- # _LT_COMPILER_FILE_LOCKS([TAGNAME])
- # ----------------------------------
- # Check to see if we can do hard links to lock some files if needed
- m4_defun([_LT_COMPILER_FILE_LOCKS],
- [m4_require([_LT_ENABLE_LOCK])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- _LT_COMPILER_C_O([$1])
- 
- hard_links="nottested"
- if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-   # do not overwrite the value of need_locks provided by the user
-   AC_MSG_CHECKING([if we can lock with hard links])
-   hard_links=yes
-   $RM conftest*
-   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-   touch conftest.a
-   ln conftest.a conftest.b 2>&5 || hard_links=no
-   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-   AC_MSG_RESULT([$hard_links])
-   if test "$hard_links" = no; then
-     AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-     need_locks=warn
-   fi
- else
-   need_locks=no
- fi
- _LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
- ])# _LT_COMPILER_FILE_LOCKS
- 
- 
- # _LT_CHECK_OBJDIR
- # ----------------
- m4_defun([_LT_CHECK_OBJDIR],
- [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
- [rm -f .libs 2>/dev/null
- mkdir .libs 2>/dev/null
- if test -d .libs; then
-   lt_cv_objdir=.libs
- else
-   # MS-DOS does not allow filenames that begin with a dot.
-   lt_cv_objdir=_libs
- fi
- rmdir .libs 2>/dev/null])
- objdir=$lt_cv_objdir
- _LT_DECL([], [objdir], [0],
-          [The name of the directory that contains temporary libtool files])dnl
- m4_pattern_allow([LT_OBJDIR])dnl
- AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-   [Define to the sub-directory in which libtool stores uninstalled libraries.])
- ])# _LT_CHECK_OBJDIR
- 
- 
- # _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
- # --------------------------------------
- # Check hardcoding attributes.
- m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
- [AC_MSG_CHECKING([how to hardcode library paths into programs])
- _LT_TAGVAR(hardcode_action, $1)=
- if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-    test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-    test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
- 
-   # We can hardcode non-existent directories.
-   if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-      # If the only mechanism to avoid hardcoding is shlibpath_var, we
-      # have to relink, otherwise we might link with an installed library
-      # when we should be linking with a yet-to-be-installed one
-      ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-      test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-     # Linking always hardcodes the temporary library directory.
-     _LT_TAGVAR(hardcode_action, $1)=relink
-   else
-     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-     _LT_TAGVAR(hardcode_action, $1)=immediate
-   fi
- else
-   # We cannot hardcode anything, or else we can only hardcode existing
-   # directories.
-   _LT_TAGVAR(hardcode_action, $1)=unsupported
- fi
- AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
- 
- if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-    test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-   # Fast installation is not supported
-   enable_fast_install=no
- elif test "$shlibpath_overrides_runpath" = yes ||
-      test "$enable_shared" = no; then
-   # Fast installation is not necessary
-   enable_fast_install=needless
- fi
- _LT_TAGDECL([], [hardcode_action], [0],
-     [How to hardcode a shared library path into an executable])
- ])# _LT_LINKER_HARDCODE_LIBPATH
- 
- 
- # _LT_CMD_STRIPLIB
- # ----------------
- m4_defun([_LT_CMD_STRIPLIB],
- [m4_require([_LT_DECL_EGREP])
- striplib=
- old_striplib=
- AC_MSG_CHECKING([whether stripping libraries is possible])
- if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-   AC_MSG_RESULT([yes])
- else
- # FIXME - insert some real tests, host_os isn't really good enough
-   case $host_os in
-   darwin*)
-     if test -n "$STRIP" ; then
-       striplib="$STRIP -x"
-       old_striplib="$STRIP -S"
-       AC_MSG_RESULT([yes])
-     else
-       AC_MSG_RESULT([no])
-     fi
-     ;;
-   *)
-     AC_MSG_RESULT([no])
-     ;;
-   esac
- fi
- _LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
- _LT_DECL([], [striplib], [1])
- ])# _LT_CMD_STRIPLIB
- 
- 
- # _LT_SYS_DYNAMIC_LINKER([TAG])
- # -----------------------------
- # PORTME Fill in your ld.so characteristics
- m4_defun([_LT_SYS_DYNAMIC_LINKER],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- m4_require([_LT_DECL_EGREP])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_OBJDUMP])dnl
- m4_require([_LT_DECL_SED])dnl
- AC_MSG_CHECKING([dynamic linker characteristics])
- m4_if([$1],
-       [], [
- if test "$GCC" = yes; then
-   case $host_os in
-     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-     *) lt_awk_arg="/^libraries:/" ;;
-   esac
-   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-   if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-     # if the path contains ";" then we assume it to be the separator
-     # otherwise default to the standard path separator (i.e. ":") - it is
-     # assumed that no part of a normal pathname contains ";" but that should
-     # okay in the real world where ";" in dirpaths is itself problematic.
-     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-   else
-     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-   fi
-   # Ok, now we have the path, separated by spaces, we can step through it
-   # and add multilib dir if necessary.
-   lt_tmp_lt_search_path_spec=
-   lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-   for lt_sys_path in $lt_search_path_spec; do
-     if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-     else
-       test -d "$lt_sys_path" && \
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-     fi
-   done
-   lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
- BEGIN {RS=" "; FS="/|\n";} {
-   lt_foo="";
-   lt_count=0;
-   for (lt_i = NF; lt_i > 0; lt_i--) {
-     if ($lt_i != "" && $lt_i != ".") {
-       if ($lt_i == "..") {
-         lt_count++;
-       } else {
-         if (lt_count == 0) {
-           lt_foo="/" $lt_i lt_foo;
-         } else {
-           lt_count--;
-         }
-       }
-     }
-   }
-   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
- }'`
-   sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
- else
-   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
- fi])
- library_names_spec=
- libname_spec='lib$name'
- soname_spec=
- shrext_cmds=".so"
- postinstall_cmds=
- postuninstall_cmds=
- finish_cmds=
- finish_eval=
- shlibpath_var=
- shlibpath_overrides_runpath=unknown
- version_type=none
- dynamic_linker="$host_os ld.so"
- sys_lib_dlsearch_path_spec="/lib /usr/lib"
- need_lib_prefix=unknown
- hardcode_into_libs=no
- 
- # when you set need_version to no, make sure it does not cause -set_version
- # flags to be left without arguments
- need_version=unknown
- 
- case $host_os in
- aix3*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-   shlibpath_var=LIBPATH
- 
-   # AIX 3 has no versioning support, so we append a major version to the name.
-   soname_spec='${libname}${release}${shared_ext}$major'
-   ;;
- 
- aix[[4-9]]*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   hardcode_into_libs=yes
-   if test "$host_cpu" = ia64; then
-     # AIX 5 supports IA64
-     library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-     shlibpath_var=LD_LIBRARY_PATH
-   else
-     # With GCC up to 2.95.x, collect2 would create an import file
-     # for dependence libraries.  The import file would start with
-     # the line `#! .'.  This would cause the generated library to
-     # depend on `.', always an invalid library.  This was fixed in
-     # development snapshots of GCC prior to 3.0.
-     case $host_os in
-       aix4 | aix4.[[01]] | aix4.[[01]].*)
-       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-          echo ' yes '
-          echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-       :
-       else
-       can_build_shared=no
-       fi
-       ;;
-     esac
-     # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-     # soname into executable. Probably we can add versioning support to
-     # collect2, so additional links can be useful in future.
-     if test "$aix_use_runtimelinking" = yes; then
-       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-       # instead of lib<name>.a to let people know that these are not
-       # typical AIX shared libraries.
-       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     else
-       # We preserve .a as extension for shared libraries through AIX4.2
-       # and later when we are not doing run time linking.
-       library_names_spec='${libname}${release}.a $libname.a'
-       soname_spec='${libname}${release}${shared_ext}$major'
-     fi
-     shlibpath_var=LIBPATH
-   fi
-   ;;
- 
- amigaos*)
-   case $host_cpu in
-   powerpc)
-     # Since July 2007 AmigaOS4 officially supports .so libraries.
-     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     ;;
-   m68k)
-     library_names_spec='$libname.ixlibrary $libname.a'
-     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-     finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-     ;;
-   esac
-   ;;
- 
- beos*)
-   library_names_spec='${libname}${shared_ext}'
-   dynamic_linker="$host_os ld.so"
-   shlibpath_var=LIBRARY_PATH
-   ;;
- 
- bsdi[[45]]*)
-   version_type=linux
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-   # the default ld.so.conf also contains /usr/contrib/lib and
-   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-   # libtool to hard-code these into programs
-   ;;
- 
- cygwin* | mingw* | pw32* | cegcc*)
-   version_type=windows
-   shrext_cmds=".dll"
-   need_version=no
-   need_lib_prefix=no
- 
-   case $GCC,$host_os in
-   yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-     library_names_spec='$libname.dll.a'
-     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-     postinstall_cmds='base_file=`basename \${file}`~
-       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-       dldir=$destdir/`dirname \$dlpath`~
-       test -d \$dldir || mkdir -p \$dldir~
-       $install_prog $dir/$dlname \$dldir/$dlname~
-       chmod a+x \$dldir/$dlname~
-       if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-         eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-       fi'
-     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-       dlpath=$dir/\$dldll~
-        $RM \$dlpath'
-     shlibpath_overrides_runpath=yes
- 
-     case $host_os in
-     cygwin*)
-       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-       ;;
-     mingw* | cegcc*)
-       # MinGW DLLs use traditional 'lib' prefix
-       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-       sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-       if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-         # It is most probably a Windows format PATH printed by
-         # mingw gcc, but we are running on Cygwin. Gcc prints its search
-         # path with ; separators, and with drive letters. We can handle the
-         # drive letters (cygwin fileutils understands them), so leave them,
-         # especially as we might pass files found there to a mingw objdump,
-         # which wouldn't understand a cygwinified path. Ahh.
-         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-       else
-         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-       fi
-       ;;
-     pw32*)
-       # pw32 DLLs use 'pw' prefix rather than 'lib'
-       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-       ;;
-     esac
-     ;;
- 
-   *)
-     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-     ;;
-   esac
-   dynamic_linker='Win32 ld.exe'
-   # FIXME: first we should search . and the directory the executable is in
-   shlibpath_var=PATH
-   ;;
- 
- darwin* | rhapsody*)
-   dynamic_linker="$host_os dyld"
-   version_type=darwin
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-   soname_spec='${libname}${release}${major}$shared_ext'
-   shlibpath_overrides_runpath=yes
-   shlibpath_var=DYLD_LIBRARY_PATH
-   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
-   sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-   ;;
- 
- dgux*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   ;;
- 
- freebsd1*)
-   dynamic_linker=no
-   ;;
- 
- freebsd* | dragonfly*)
-   # DragonFly does not have aout.  When/if they implement a new
-   # versioning mechanism, adjust this.
-   if test -x /usr/bin/objformat; then
-     objformat=`/usr/bin/objformat`
-   else
-     case $host_os in
-     freebsd[[123]]*) objformat=aout ;;
-     *) objformat=elf ;;
-     esac
-   fi
-   version_type=freebsd-$objformat
-   case $version_type in
-     freebsd-elf*)
-       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-       need_version=no
-       need_lib_prefix=no
-       ;;
-     freebsd-*)
-       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-       need_version=yes
-       ;;
-   esac
-   shlibpath_var=LD_LIBRARY_PATH
-   case $host_os in
-   freebsd2*)
-     shlibpath_overrides_runpath=yes
-     ;;
-   freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-     shlibpath_overrides_runpath=yes
-     hardcode_into_libs=yes
-     ;;
-   freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-   freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-     shlibpath_overrides_runpath=no
-     hardcode_into_libs=yes
-     ;;
-   *) # from 4.6 on, and DragonFly
-     shlibpath_overrides_runpath=yes
-     hardcode_into_libs=yes
-     ;;
-   esac
-   ;;
- 
- gnu*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   hardcode_into_libs=yes
-   ;;
- 
- hpux9* | hpux10* | hpux11*)
-   # Give a soname corresponding to the major version so that dld.sl refuses to
-   # link against other versions.
-   version_type=sunos
-   need_lib_prefix=no
-   need_version=no
-   case $host_cpu in
-   ia64*)
-     shrext_cmds='.so'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.so"
-     shlibpath_var=LD_LIBRARY_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     if test "X$HPUX_IA64_MODE" = X32; then
-       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-     else
-       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-     fi
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-     shrext_cmds='.sl'
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=SHLIB_PATH
-     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     ;;
-   esac
-   # HP-UX runs *really* slowly unless shared libraries are mode 555.
-   postinstall_cmds='chmod 555 $lib'
-   ;;
- 
- interix[[3-9]]*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   ;;
- 
- irix5* | irix6* | nonstopux*)
-   case $host_os in
-     nonstopux*) version_type=nonstopux ;;
-     *)
-       if test "$lt_cv_prog_gnu_ld" = yes; then
-               version_type=linux
-       else
-               version_type=irix
-       fi ;;
-   esac
-   need_lib_prefix=no
-   need_version=no
-   soname_spec='${libname}${release}${shared_ext}$major'
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-   case $host_os in
-   irix5* | nonstopux*)
-     libsuff= shlibsuff=
-     ;;
-   *)
-     case $LD in # libtool.m4 will add one of these switches to LD
-     *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-       libsuff= shlibsuff= libmagic=32-bit;;
-     *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-       libsuff=32 shlibsuff=N32 libmagic=N32;;
-     *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-       libsuff=64 shlibsuff=64 libmagic=64-bit;;
-     *) libsuff= shlibsuff= libmagic=never-match;;
-     esac
-     ;;
-   esac
-   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-   shlibpath_overrides_runpath=no
-   sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-   hardcode_into_libs=yes
-   ;;
- 
- # No shared lib support for Linux oldld, aout, or coff.
- linux*oldld* | linux*aout* | linux*coff*)
-   dynamic_linker=no
-   ;;
- 
- # This must be Linux ELF.
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   # Some binutils ld are patched to set DT_RUNPATH
-   save_LDFLAGS=$LDFLAGS
-   save_libdir=$libdir
-   eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-        LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-   AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-     [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-        [shlibpath_overrides_runpath=yes])])
-   LDFLAGS=$save_LDFLAGS
-   libdir=$save_libdir
- 
-   # This implies no fast_install, which is unacceptable.
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
- 
-   # Append ld.so.conf contents to the search path
-   if test -f /etc/ld.so.conf; then
-     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[         ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-   fi
- 
-   # We used to test for /lib/ld.so.1 and disable shared libraries on
-   # powerpc, because MkLinux only supported shared libraries with the
-   # GNU dynamic linker.  Since this was broken with cross compilers,
-   # most powerpc-linux boxes support dynamic linking these days and
-   # people can always --disable-shared, the test was removed, and we
-   # assume the GNU/Linux dynamic linker is in use.
-   dynamic_linker='GNU/Linux ld.so'
-   ;;
- 
- netbsdelf*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   dynamic_linker='NetBSD ld.elf_so'
-   ;;
- 
- netbsd*)
-   version_type=sunos
-   need_lib_prefix=no
-   need_version=no
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-     dynamic_linker='NetBSD (a.out) ld.so'
-   else
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     dynamic_linker='NetBSD ld.elf_so'
-   fi
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   ;;
- 
- newsos6)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   ;;
- 
- *nto* | *qnx*)
-   version_type=qnx
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   dynamic_linker='ldqnx.so'
-   ;;
- 
- openbsd*)
-   version_type=sunos
-   sys_lib_dlsearch_path_spec="/usr/lib"
-   need_lib_prefix=no
-   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-   case $host_os in
-     openbsd3.3 | openbsd3.3.*)        need_version=yes ;;
-     *)                                need_version=no  ;;
-   esac
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-     case $host_os in
-       openbsd2.[[89]] | openbsd2.[[89]].*)
-       shlibpath_overrides_runpath=no
-       ;;
-       *)
-       shlibpath_overrides_runpath=yes
-       ;;
-       esac
-   else
-     shlibpath_overrides_runpath=yes
-   fi
-   ;;
- 
- os2*)
-   libname_spec='$name'
-   shrext_cmds=".dll"
-   need_lib_prefix=no
-   library_names_spec='$libname${shared_ext} $libname.a'
-   dynamic_linker='OS/2 ld.exe'
-   shlibpath_var=LIBPATH
-   ;;
- 
- osf3* | osf4* | osf5*)
-   version_type=osf
-   need_lib_prefix=no
-   need_version=no
-   soname_spec='${libname}${release}${shared_ext}$major'
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-   ;;
- 
- rdos*)
-   dynamic_linker=no
-   ;;
- 
- solaris*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   # ldd complains unless libraries are executable
-   postinstall_cmds='chmod +x $lib'
-   ;;
- 
- sunos4*)
-   version_type=sunos
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   if test "$with_gnu_ld" = yes; then
-     need_lib_prefix=no
-   fi
-   need_version=yes
-   ;;
- 
- sysv4 | sysv4.3*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   case $host_vendor in
-     sni)
-       shlibpath_overrides_runpath=no
-       need_lib_prefix=no
-       runpath_var=LD_RUN_PATH
-       ;;
-     siemens)
-       need_lib_prefix=no
-       ;;
-     motorola)
-       need_lib_prefix=no
-       need_version=no
-       shlibpath_overrides_runpath=no
-       sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-       ;;
-   esac
-   ;;
- 
- sysv4*MP*)
-   if test -d /usr/nec ;then
-     version_type=linux
-     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-     soname_spec='$libname${shared_ext}.$major'
-     shlibpath_var=LD_LIBRARY_PATH
-   fi
-   ;;
- 
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-   version_type=freebsd-elf
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   if test "$with_gnu_ld" = yes; then
-     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-   else
-     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-     case $host_os in
-       sco3.2v5*)
-         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-       ;;
-     esac
-   fi
-   sys_lib_dlsearch_path_spec='/usr/lib'
-   ;;
- 
- tpf*)
-   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   ;;
- 
- uts4*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   ;;
- 
- *)
-   dynamic_linker=no
-   ;;
- esac
- AC_MSG_RESULT([$dynamic_linker])
- test "$dynamic_linker" = no && can_build_shared=no
- 
- variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
- if test "$GCC" = yes; then
-   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
- fi
- 
- if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-   sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
- fi
- if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-   sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
- fi
- 
- _LT_DECL([], [variables_saved_for_relink], [1],
-     [Variables whose values should be saved in libtool wrapper scripts and
-     restored at link time])
- _LT_DECL([], [need_lib_prefix], [0],
-     [Do we need the "lib" prefix for modules?])
- _LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
- _LT_DECL([], [version_type], [0], [Library versioning type])
- _LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
- _LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
- _LT_DECL([], [shlibpath_overrides_runpath], [0],
-     [Is shlibpath searched before the hard-coded library search path?])
- _LT_DECL([], [libname_spec], [1], [Format of library name prefix])
- _LT_DECL([], [library_names_spec], [1],
-     [[List of archive names.  First name is the real one, the rest are links.
-     The last name is the one that the linker finds with -lNAME]])
- _LT_DECL([], [soname_spec], [1],
-     [[The coded name of the library, if different from the real name]])
- _LT_DECL([], [postinstall_cmds], [2],
-     [Command to use after installation of a shared archive])
- _LT_DECL([], [postuninstall_cmds], [2],
-     [Command to use after uninstallation of a shared archive])
- _LT_DECL([], [finish_cmds], [2],
-     [Commands used to finish a libtool library installation in a directory])
- _LT_DECL([], [finish_eval], [1],
-     [[As "finish_cmds", except a single script fragment to be evaled but
-     not shown]])
- _LT_DECL([], [hardcode_into_libs], [0],
-     [Whether we should hardcode library paths into libraries])
- _LT_DECL([], [sys_lib_search_path_spec], [2],
-     [Compile-time system search path for libraries])
- _LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-     [Run-time system search path for libraries])
- ])# _LT_SYS_DYNAMIC_LINKER
- 
- 
- # _LT_PATH_TOOL_PREFIX(TOOL)
- # --------------------------
- # find a file program which can recognize shared library
- AC_DEFUN([_LT_PATH_TOOL_PREFIX],
- [m4_require([_LT_DECL_EGREP])dnl
- AC_MSG_CHECKING([for $1])
- AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
- [case $MAGIC_CMD in
- [[\\/*] |  ?:[\\/]*])
-   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-   ;;
- *)
-   lt_save_MAGIC_CMD="$MAGIC_CMD"
-   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- dnl $ac_dummy forces splitting on constant user-supplied paths.
- dnl POSIX.2 word splitting is done only on the output of word expansions,
- dnl not every word.  This closes a longstanding sh security hole.
-   ac_dummy="m4_if([$2], , $PATH, [$2])"
-   for ac_dir in $ac_dummy; do
-     IFS="$lt_save_ifs"
-     test -z "$ac_dir" && ac_dir=.
-     if test -f $ac_dir/$1; then
-       lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-       if test -n "$file_magic_test_file"; then
-       case $deplibs_check_method in
-       "file_magic "*)
-         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-           $EGREP "$file_magic_regex" > /dev/null; then
-           :
-         else
-           cat <<_LT_EOF 1>&2
- 
- *** Warning: the command libtool uses to detect shared libraries,
- *** $file_magic_cmd, produces output that libtool cannot recognize.
- *** The result is that libtool may fail to recognize shared libraries
- *** as such.  This will affect the creation of libtool libraries that
- *** depend on shared libraries, but programs linked with such libtool
- *** libraries will work regardless of this problem.  Nevertheless, you
- *** may want to report the problem to your system manager and/or to
- *** bug-libtool@gnu.org
- 
- _LT_EOF
-         fi ;;
-       esac
-       fi
-       break
-     fi
-   done
-   IFS="$lt_save_ifs"
-   MAGIC_CMD="$lt_save_MAGIC_CMD"
-   ;;
- esac])
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if test -n "$MAGIC_CMD"; then
-   AC_MSG_RESULT($MAGIC_CMD)
- else
-   AC_MSG_RESULT(no)
- fi
- _LT_DECL([], [MAGIC_CMD], [0],
-        [Used to examine libraries when file_magic_cmd begins with "file"])dnl
- ])# _LT_PATH_TOOL_PREFIX
- 
- # Old name:
- AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
- 
- 
- # _LT_PATH_MAGIC
- # --------------
- # find a file program which can recognize a shared library
- m4_defun([_LT_PATH_MAGIC],
- [_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
- if test -z "$lt_cv_path_MAGIC_CMD"; then
-   if test -n "$ac_tool_prefix"; then
-     _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-   else
-     MAGIC_CMD=:
-   fi
- fi
- ])# _LT_PATH_MAGIC
- 
- 
- # LT_PATH_LD
- # ----------
- # find the pathname to the GNU or non-GNU linker
- AC_DEFUN([LT_PATH_LD],
- [AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_CANONICAL_HOST])dnl
- AC_REQUIRE([AC_CANONICAL_BUILD])dnl
- m4_require([_LT_DECL_SED])dnl
- m4_require([_LT_DECL_EGREP])dnl
- 
- AC_ARG_WITH([gnu-ld],
-     [AS_HELP_STRING([--with-gnu-ld],
-       [assume the C compiler uses GNU ld @<:@default=no@:>@])],
-     [test "$withval" = no || with_gnu_ld=yes],
-     [with_gnu_ld=no])dnl
- 
- ac_prog=ld
- if test "$GCC" = yes; then
-   # Check if gcc -print-prog-name=ld gives a path.
-   AC_MSG_CHECKING([for ld used by $CC])
-   case $host in
-   *-*-mingw*)
-     # gcc leaves a trailing carriage return which upsets mingw
-     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-   *)
-     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-   esac
-   case $ac_prog in
-     # Accept absolute paths.
-     [[\\/]]* | ?:[[\\/]]*)
-       re_direlt='/[[^/]][[^/]]*/\.\./'
-       # Canonicalize the pathname of ld
-       ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-       ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-       done
-       test -z "$LD" && LD="$ac_prog"
-       ;;
-   "")
-     # If it fails, then pretend we aren't using GCC.
-     ac_prog=ld
-     ;;
-   *)
-     # If it is relative, then search for the first ld in PATH.
-     with_gnu_ld=unknown
-     ;;
-   esac
- elif test "$with_gnu_ld" = yes; then
-   AC_MSG_CHECKING([for GNU ld])
- else
-   AC_MSG_CHECKING([for non-GNU ld])
- fi
- AC_CACHE_VAL(lt_cv_path_LD,
- [if test -z "$LD"; then
-   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-   for ac_dir in $PATH; do
-     IFS="$lt_save_ifs"
-     test -z "$ac_dir" && ac_dir=.
-     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-       lt_cv_path_LD="$ac_dir/$ac_prog"
-       # Check to see if the program is GNU ld.  I'd rather use --version,
-       # but apparently some variants of GNU ld only accept -v.
-       # Break only if it was the GNU/non-GNU ld that we prefer.
-       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-       *GNU* | *'with BFD'*)
-       test "$with_gnu_ld" != no && break
-       ;;
-       *)
-       test "$with_gnu_ld" != yes && break
-       ;;
-       esac
-     fi
-   done
-   IFS="$lt_save_ifs"
- else
-   lt_cv_path_LD="$LD" # Let the user override the test with a path.
- fi])
- LD="$lt_cv_path_LD"
- if test -n "$LD"; then
-   AC_MSG_RESULT($LD)
- else
-   AC_MSG_RESULT(no)
- fi
- test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
- _LT_PATH_LD_GNU
- AC_SUBST([LD])
- 
- _LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
- ])# LT_PATH_LD
- 
- # Old names:
- AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
- AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AM_PROG_LD], [])
- dnl AC_DEFUN([AC_PROG_LD], [])
- 
- 
- # _LT_PATH_LD_GNU
- #- --------------
- m4_defun([_LT_PATH_LD_GNU],
- [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
- [# I'd rather use --version here, but apparently some GNU lds only accept -v.
- case `$LD -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
-   lt_cv_prog_gnu_ld=yes
-   ;;
- *)
-   lt_cv_prog_gnu_ld=no
-   ;;
- esac])
- with_gnu_ld=$lt_cv_prog_gnu_ld
- ])# _LT_PATH_LD_GNU
- 
- 
- # _LT_CMD_RELOAD
- # --------------
- # find reload flag for linker
- #   -- PORTME Some linkers may need a different reload flag.
- m4_defun([_LT_CMD_RELOAD],
- [AC_CACHE_CHECK([for $LD option to reload object files],
-   lt_cv_ld_reload_flag,
-   [lt_cv_ld_reload_flag='-r'])
- reload_flag=$lt_cv_ld_reload_flag
- case $reload_flag in
- "" | " "*) ;;
- *) reload_flag=" $reload_flag" ;;
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-   darwin*)
-     if test "$GCC" = yes; then
-       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-     else
-       reload_cmds='$LD$reload_flag -o $output$reload_objs'
-     fi
-     ;;
- esac
- _LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
- _LT_DECL([], [reload_cmds], [2])dnl
- ])# _LT_CMD_RELOAD
- 
- 
- # _LT_CHECK_MAGIC_METHOD
- # ----------------------
- # how to check for library dependencies
- #  -- PORTME fill in with the dynamic library characteristics
- m4_defun([_LT_CHECK_MAGIC_METHOD],
- [m4_require([_LT_DECL_EGREP])
- m4_require([_LT_DECL_OBJDUMP])
- AC_CACHE_CHECK([how to recognize dependent libraries],
- lt_cv_deplibs_check_method,
- [lt_cv_file_magic_cmd='$MAGIC_CMD'
- lt_cv_file_magic_test_file=
- lt_cv_deplibs_check_method='unknown'
- # Need to set the preceding variable on all platforms that support
- # interlibrary dependencies.
- # 'none' -- dependencies not supported.
- # `unknown' -- same as none, but documents that we really don't know.
- # 'pass_all' -- all dependencies passed with no checks.
- # 'test_compile' -- check by making test program.
- # 'file_magic [[regex]]' -- check by looking for files in library path
- # which responds to the $file_magic_cmd with a given extended regex.
- # If you have `file' or equivalent on your system and you're not sure
- # whether `pass_all' will *always* work, you probably want this one.
- 
- case $host_os in
- aix[[4-9]]*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- beos*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- bsdi[[45]]*)
-   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-   lt_cv_file_magic_cmd='/usr/bin/file -L'
-   lt_cv_file_magic_test_file=/shlib/libc.so
-   ;;
- 
- cygwin*)
-   # func_win32_libid is a shell function defined in ltmain.sh
-   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-   lt_cv_file_magic_cmd='func_win32_libid'
-   ;;
- 
- mingw* | pw32*)
-   # Base MSYS/MinGW do not provide the 'file' command needed by
-   # func_win32_libid shell function, so use a weaker test based on 'objdump',
-   # unless we find 'file', for example because we are cross-compiling.
-   if ( file / ) >/dev/null 2>&1; then
-     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-     lt_cv_file_magic_cmd='func_win32_libid'
-   else
-     lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-     lt_cv_file_magic_cmd='$OBJDUMP -f'
-   fi
-   ;;
- 
- cegcc)
-   # use the weaker test based on 'objdump'. See mingw*.
-   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-   lt_cv_file_magic_cmd='$OBJDUMP -f'
-   ;;
- 
- darwin* | rhapsody*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- freebsd* | dragonfly*)
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-     case $host_cpu in
-     i*86 )
-       # Not sure whether the presence of OpenBSD here was a mistake.
-       # Let's accept both of them until this is cleared up.
-       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-       lt_cv_file_magic_cmd=/usr/bin/file
-       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-       ;;
-     esac
-   else
-     lt_cv_deplibs_check_method=pass_all
-   fi
-   ;;
- 
- gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- hpux10.20* | hpux11*)
-   lt_cv_file_magic_cmd=/usr/bin/file
-   case $host_cpu in
-   ia64*)
-     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-     ;;
-   hppa*64*)
-     [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-     ;;
-   *)
-     lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-     lt_cv_file_magic_test_file=/usr/lib/libc.sl
-     ;;
-   esac
-   ;;
- 
- interix[[3-9]]*)
-   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-   lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-   ;;
- 
- irix5* | irix6* | nonstopux*)
-   case $LD in
-   *-32|*"-32 ") libmagic=32-bit;;
-   *-n32|*"-n32 ") libmagic=N32;;
-   *-64|*"-64 ") libmagic=64-bit;;
-   *) libmagic=never-match;;
-   esac
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- # This must be Linux ELF.
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- netbsd* | netbsdelf*-gnu)
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-   else
-     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-   fi
-   ;;
- 
- newos6*)
-   lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-   lt_cv_file_magic_cmd=/usr/bin/file
-   lt_cv_file_magic_test_file=/usr/lib/libnls.so
-   ;;
- 
- *nto* | *qnx*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- openbsd*)
-   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-   else
-     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-   fi
-   ;;
- 
- osf3* | osf4* | osf5*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- rdos*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- solaris*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- sysv4 | sysv4.3*)
-   case $host_vendor in
-   motorola)
-     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-     lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-     ;;
-   ncr)
-     lt_cv_deplibs_check_method=pass_all
-     ;;
-   sequent)
-     lt_cv_file_magic_cmd='/bin/file'
-     lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-     ;;
-   sni)
-     lt_cv_file_magic_cmd='/bin/file'
-     lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-     lt_cv_file_magic_test_file=/lib/libc.so
-     ;;
-   siemens)
-     lt_cv_deplibs_check_method=pass_all
-     ;;
-   pc)
-     lt_cv_deplibs_check_method=pass_all
-     ;;
-   esac
-   ;;
- 
- tpf*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- esac
- ])
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
- 
- _LT_DECL([], [deplibs_check_method], [1],
-     [Method to check whether dependent libraries are shared objects])
- _LT_DECL([], [file_magic_cmd], [1],
-     [Command to use when deplibs_check_method == "file_magic"])
- ])# _LT_CHECK_MAGIC_METHOD
- 
- 
- # LT_PATH_NM
- # ----------
- # find the pathname to a BSD- or MS-compatible name lister
- AC_DEFUN([LT_PATH_NM],
- [AC_REQUIRE([AC_PROG_CC])dnl
- AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
- [if test -n "$NM"; then
-   # Let the user override the test.
-   lt_cv_path_NM="$NM"
- else
-   lt_nm_to_check="${ac_tool_prefix}nm"
-   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-     lt_nm_to_check="$lt_nm_to_check nm"
-   fi
-   for lt_tmp_nm in $lt_nm_to_check; do
-     lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-       IFS="$lt_save_ifs"
-       test -z "$ac_dir" && ac_dir=.
-       tmp_nm="$ac_dir/$lt_tmp_nm"
-       if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-       fi
-     done
-     IFS="$lt_save_ifs"
-   done
-   : ${lt_cv_path_NM=no}
- fi])
- if test "$lt_cv_path_NM" != "no"; then
-   NM="$lt_cv_path_NM"
- else
-   # Didn't find any BSD compatible name lister, look for dumpbin.
-   AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
-   AC_SUBST([DUMPBIN])
-   if test "$DUMPBIN" != ":"; then
-     NM="$DUMPBIN"
-   fi
- fi
- test -z "$NM" && NM=nm
- AC_SUBST([NM])
- _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
- 
- AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-   [lt_cv_nm_interface="BSD nm"
-   echo "int some_variable = 0;" > conftest.$ac_ext
-   (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$ac_compile" 2>conftest.err)
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
-   cat conftest.out >&AS_MESSAGE_LOG_FD
-   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-     lt_cv_nm_interface="MS dumpbin"
-   fi
-   rm -f conftest*])
- ])# LT_PATH_NM
- 
- # Old names:
- AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
- AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AM_PROG_NM], [])
- dnl AC_DEFUN([AC_PROG_NM], [])
- 
- 
- # LT_LIB_M
- # --------
- # check for math library
- AC_DEFUN([LT_LIB_M],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- LIBM=
- case $host in
- *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-   # These system don't have libm, or don't need it
-   ;;
- *-ncr-sysv4.3*)
-   AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-   AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-   ;;
- *)
-   AC_CHECK_LIB(m, cos, LIBM="-lm")
-   ;;
- esac
- AC_SUBST([LIBM])
- ])# LT_LIB_M
- 
- # Old name:
- AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_CHECK_LIBM], [])
- 
- 
- # _LT_COMPILER_NO_RTTI([TAGNAME])
- # -------------------------------
- m4_defun([_LT_COMPILER_NO_RTTI],
- [m4_require([_LT_TAG_COMPILER])dnl
- 
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
- 
- if test "$GCC" = yes; then
-   _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
- 
-   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-     lt_cv_prog_compiler_rtti_exceptions,
-     [-fno-rtti -fno-exceptions], [],
-     [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
- fi
- _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-       [Compiler flag to turn off builtin functions])
- ])# _LT_COMPILER_NO_RTTI
- 
- 
- # _LT_CMD_GLOBAL_SYMBOLS
- # ----------------------
- m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([LT_PATH_NM])dnl
- AC_REQUIRE([LT_PATH_LD])dnl
- m4_require([_LT_DECL_SED])dnl
- m4_require([_LT_DECL_EGREP])dnl
- m4_require([_LT_TAG_COMPILER])dnl
- 
- # Check for command to grab the raw symbol name followed by C symbol from nm.
- AC_MSG_CHECKING([command to parse $NM output from $compiler object])
- AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
- [
- # These are sane defaults that work on at least a few old systems.
- # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
- 
- # Character class describing NM global symbol codes.
- symcode='[[BCDEGRST]]'
- 
- # Regexp to match symbols that can be accessed directly from C.
- sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
- 
- # Define system-specific variables.
- case $host_os in
- aix*)
-   symcode='[[BCDT]]'
-   ;;
- cygwin* | mingw* | pw32* | cegcc*)
-   symcode='[[ABCDGISTW]]'
-   ;;
- hpux*)
-   if test "$host_cpu" = ia64; then
-     symcode='[[ABCDEGRST]]'
-   fi
-   ;;
- irix* | nonstopux*)
-   symcode='[[BCDEGRST]]'
-   ;;
- osf*)
-   symcode='[[BCDEGQRST]]'
-   ;;
- solaris*)
-   symcode='[[BDRT]]'
-   ;;
- sco3.2v5*)
-   symcode='[[DT]]'
-   ;;
- sysv4.2uw2*)
-   symcode='[[DT]]'
-   ;;
- sysv5* | sco5v6* | unixware* | OpenUNIX*)
-   symcode='[[ABDT]]'
-   ;;
- sysv4)
-   symcode='[[DFNSTU]]'
-   ;;
- esac
- 
- # If we're using GNU nm, then use its standard symbol codes.
- case `$NM -V 2>&1` in
- *GNU* | *'with BFD'*)
-   symcode='[[ABCDGIRSTW]]' ;;
- esac
- 
- # Transform an extracted symbol line into a proper C declaration.
- # Some systems (esp. on ia64) link data and code symbols differently,
- # so use this general approach.
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- 
- # Transform an extracted symbol line into symbol name and symbol address
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
- 
- # Handle CRLF in mingw tool chain
- opt_cr=
- case $build_os in
- mingw*)
-   opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-   ;;
- esac
- 
- # Try without a prefix underscore, then with it.
- for ac_symprfx in "" "_"; do
- 
-   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-   symxfrm="\\1 $ac_symprfx\\2 \\2"
- 
-   # Write the raw and C identifiers.
-   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-     # Fake it for dumpbin and say T for any non-static function
-     # and D for any global variable.
-     # Also find C++ and __fastcall symbols from MSVC++,
-     # which start with @ or ?.
-     lt_cv_sys_global_symbol_pipe="$AWK ['"\
- "     {last_section=section; section=\$ 3};"\
- "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
- "     \$ 0!~/External *\|/{next};"\
- "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
- "     {if(hide[section]) next};"\
- "     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
- "     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
- "     s[1]~/^[@?]/{print s[1], s[1]; next};"\
- "     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
- "     ' prfx=^$ac_symprfx]"
-   else
-     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[   ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-   fi
- 
-   # Check to see that the pipe works correctly.
-   pipe_works=no
- 
-   rm -f conftest*
-   cat > conftest.$ac_ext <<_LT_EOF
- #ifdef __cplusplus
- extern "C" {
- #endif
- char nm_test_var;
- void nm_test_func(void);
- void nm_test_func(void){}
- #ifdef __cplusplus
- }
- #endif
- int main(){nm_test_var='a';nm_test_func();return(0);}
- _LT_EOF
- 
-   if AC_TRY_EVAL(ac_compile); then
-     # Now try to grab the symbols.
-     nlist=conftest.nm
-     if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-       # Try sorting and uniquifying the output.
-       if sort "$nlist" | uniq > "$nlist"T; then
-       mv -f "$nlist"T "$nlist"
-       else
-       rm -f "$nlist"T
-       fi
- 
-       # Make sure that we snagged all the symbols we need.
-       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-       if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-         cat <<_LT_EOF > conftest.$ac_ext
- #ifdef __cplusplus
- extern "C" {
- #endif
- 
- _LT_EOF
-         # Now generate the symbol file.
-         eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
- 
-         cat <<_LT_EOF >> conftest.$ac_ext
- 
- /* The mapping between symbol names and symbols.  */
- const struct {
-   const char *name;
-   void       *address;
- }
- lt__PROGRAM__LTX_preloaded_symbols[[]] =
- {
-   { "@PROGRAM@", (void *) 0 },
- _LT_EOF
-         $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-         cat <<\_LT_EOF >> conftest.$ac_ext
-   {0, (void *) 0}
- };
- 
- /* This works around a problem in FreeBSD linker */
- #ifdef FREEBSD_WORKAROUND
- static const void *lt_preloaded_setup() {
-   return lt__PROGRAM__LTX_preloaded_symbols;
- }
- #endif
- 
- #ifdef __cplusplus
- }
- #endif
- _LT_EOF
-         # Now try linking the two files.
-         mv conftest.$ac_objext conftstm.$ac_objext
-         lt_save_LIBS="$LIBS"
-         lt_save_CFLAGS="$CFLAGS"
-         LIBS="conftstm.$ac_objext"
-         CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-         if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-           pipe_works=yes
-         fi
-         LIBS="$lt_save_LIBS"
-         CFLAGS="$lt_save_CFLAGS"
-       else
-         echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-       fi
-       else
-       echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-       fi
-     else
-       echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-     fi
-   else
-     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-     cat conftest.$ac_ext >&5
-   fi
-   rm -rf conftest* conftst*
- 
-   # Do not use the global_symbol_pipe unless it works.
-   if test "$pipe_works" = yes; then
-     break
-   else
-     lt_cv_sys_global_symbol_pipe=
-   fi
- done
- ])
- if test -z "$lt_cv_sys_global_symbol_pipe"; then
-   lt_cv_sys_global_symbol_to_cdecl=
- fi
- if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-   AC_MSG_RESULT(failed)
- else
-   AC_MSG_RESULT(ok)
- fi
- 
- _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-     [Take the output of nm and produce a listing of raw symbols and C names])
- _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-     [Transform the output of nm in a proper C declaration])
- _LT_DECL([global_symbol_to_c_name_address],
-     [lt_cv_sys_global_symbol_to_c_name_address], [1],
-     [Transform the output of nm in a C name address pair])
- _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-     [Transform the output of nm in a C name address pair when lib prefix is needed])
- ]) # _LT_CMD_GLOBAL_SYMBOLS
- 
- 
- # _LT_COMPILER_PIC([TAGNAME])
- # ---------------------------
- m4_defun([_LT_COMPILER_PIC],
- [m4_require([_LT_TAG_COMPILER])dnl
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
- 
- AC_MSG_CHECKING([for $compiler option to produce PIC])
- m4_if([$1], [CXX], [
-   # C++ specific cases for pic, static, wl, etc.
-   if test "$GXX" = yes; then
-     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- 
-     case $host_os in
-     aix*)
-       # All AIX code is PIC.
-       if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       fi
-       ;;
- 
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-         ;;
-       m68k)
-             # FIXME: we need at least 68020 code to build shared libraries, but
-             # adding the `-m68020' flag to GCC prevents building anything better,
-             # like `-m68040'.
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-         ;;
-       esac
-       ;;
- 
-     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-       # PIC is the default for these OSes.
-       ;;
-     mingw* | cygwin* | os2* | pw32* | cegcc*)
-       # This hack is so that the source file can tell whether it is being
-       # built for inclusion in a dll (and should export symbols for example).
-       # Although the cygwin gcc ignores -fPIC, still need this for old-style
-       # (--disable-auto-import) libraries
-       m4_if([$1], [GCJ], [],
-       [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-       ;;
-     darwin* | rhapsody*)
-       # PIC is the default on this platform
-       # Common symbols not allowed in MH_DYLIB files
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-       ;;
-     *djgpp*)
-       # DJGPP does not support shared libraries at all
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-       ;;
-     interix[[3-9]]*)
-       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-       # Instead, we relocate shared libraries at runtime.
-       ;;
-     sysv4*MP*)
-       if test -d /usr/nec; then
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-       fi
-       ;;
-     hpux*)
-       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-       # sets the default TLS model and affects inlining.
-       case $host_cpu in
-       hppa*64*)
-       ;;
-       *)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-       esac
-       ;;
-     *qnx* | *nto*)
-       # QNX uses GNU C++, but need to define -shared option too, otherwise
-       # it will coredump.
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-       ;;
-     *)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-     esac
-   else
-     case $host_os in
-       aix[[4-9]]*)
-       # All AIX code is PIC.
-       if test "$host_cpu" = ia64; then
-         # AIX 5 now supports IA64 processor
-         _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       else
-         _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-       fi
-       ;;
-       chorus*)
-       case $cc_basename in
-       cxch68*)
-         # Green Hills C++ Compiler
-         # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-         ;;
-       esac
-       ;;
-       dgux*)
-       case $cc_basename in
-         ec++*)
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           ;;
-         ghcx*)
-           # Green Hills C++ Compiler
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       freebsd* | dragonfly*)
-       # FreeBSD uses GNU C++
-       ;;
-       hpux9* | hpux10* | hpux11*)
-       case $cc_basename in
-         CC*)
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-           if test "$host_cpu" != ia64; then
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-           fi
-           ;;
-         aCC*)
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-           case $host_cpu in
-           hppa*64*|ia64*)
-             # +Z the default
-             ;;
-           *)
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-             ;;
-           esac
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       interix*)
-       # This is c89, which is MS Visual C++ (no shared libs)
-       # Anyone wants to do a port?
-       ;;
-       irix5* | irix6* | nonstopux*)
-       case $cc_basename in
-         CC*)
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           # CC pic flag -KPIC is the default.
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       linux* | k*bsd*-gnu | kopensolaris*-gnu)
-       case $cc_basename in
-         KCC*)
-           # KAI C++ Compiler
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-           ;;
-         ecpc* )
-           # old Intel C++ for x86_64 which still supported -KPIC.
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-           ;;
-         icpc* )
-           # Intel C++, used to be incompatible with GCC.
-           # ICC 10 doesn't accept -KPIC any more.
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-           ;;
-         pgCC* | pgcpp*)
-           # Portland Group C++ compiler
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-         cxx*)
-           # Compaq C++
-           # Make sure the PIC flag is empty.  It appears that all Alpha
-           # Linux and Compaq Tru64 Unix objects are PIC.
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           ;;
-         xlc* | xlC*)
-           # IBM XL 8.0 on PPC
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-           ;;
-         *)
-           case `$CC -V 2>&1 | sed 5q` in
-           *Sun\ C*)
-             # Sun C++ 5.9
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-             _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-             _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-             ;;
-           esac
-           ;;
-       esac
-       ;;
-       lynxos*)
-       ;;
-       m88k*)
-       ;;
-       mvs*)
-       case $cc_basename in
-         cxx*)
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       netbsd* | netbsdelf*-gnu)
-       ;;
-       *qnx* | *nto*)
-         # QNX uses GNU C++, but need to define -shared option too, otherwise
-         # it will coredump.
-         _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-         ;;
-       osf3* | osf4* | osf5*)
-       case $cc_basename in
-         KCC*)
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-           ;;
-         RCC*)
-           # Rational C++ 2.4.1
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         cxx*)
-           # Digital/Compaq C++
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           # Make sure the PIC flag is empty.  It appears that all Alpha
-           # Linux and Compaq Tru64 Unix objects are PIC.
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       psos*)
-       ;;
-       solaris*)
-       case $cc_basename in
-         CC*)
-           # Sun C++ 4.2, 5.x and Centerline C++
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-           ;;
-         gcx*)
-           # Green Hills C++ Compiler
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       sunos4*)
-       case $cc_basename in
-         CC*)
-           # Sun C++ 4.x
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-         lcc*)
-           # Lucid
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-       case $cc_basename in
-         CC*)
-           _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-           ;;
-       esac
-       ;;
-       tandem*)
-       case $cc_basename in
-         NCC*)
-           # NonStop-UX NCC 3.20
-           _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-           ;;
-         *)
-           ;;
-       esac
-       ;;
-       vxworks*)
-       ;;
-       *)
-       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-       ;;
-     esac
-   fi
- ],
- [
-   if test "$GCC" = yes; then
-     _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-     _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- 
-     case $host_os in
-       aix*)
-       # All AIX code is PIC.
-       if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       fi
-       ;;
- 
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-         ;;
-       m68k)
-             # FIXME: we need at least 68020 code to build shared libraries, but
-             # adding the `-m68020' flag to GCC prevents building anything better,
-             # like `-m68040'.
-             _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-         ;;
-       esac
-       ;;
- 
-     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-       # PIC is the default for these OSes.
-       ;;
- 
-     mingw* | cygwin* | pw32* | os2* | cegcc*)
-       # This hack is so that the source file can tell whether it is being
-       # built for inclusion in a dll (and should export symbols for example).
-       # Although the cygwin gcc ignores -fPIC, still need this for old-style
-       # (--disable-auto-import) libraries
-       m4_if([$1], [GCJ], [],
-       [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-       ;;
- 
-     darwin* | rhapsody*)
-       # PIC is the default on this platform
-       # Common symbols not allowed in MH_DYLIB files
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-       ;;
- 
-     hpux*)
-       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-       # sets the default TLS model and affects inlining.
-       case $host_cpu in
-       hppa*64*)
-       # +Z the default
-       ;;
-       *)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-       esac
-       ;;
- 
-     interix[[3-9]]*)
-       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-       # Instead, we relocate shared libraries at runtime.
-       ;;
- 
-     msdosdjgpp*)
-       # Just because we use GCC doesn't mean we suddenly get shared libraries
-       # on systems that don't support them.
-       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-       enable_shared=no
-       ;;
- 
-     *nto* | *qnx*)
-       # QNX uses GNU C++, but need to define -shared option too, otherwise
-       # it will coredump.
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-       ;;
- 
-     sysv4*MP*)
-       if test -d /usr/nec; then
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-       fi
-       ;;
- 
-     *)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       ;;
-     esac
-   else
-     # PORTME Check for flag to pass linker flags through the system compiler.
-     case $host_os in
-     aix*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       else
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-       fi
-       ;;
- 
-     mingw* | cygwin* | pw32* | os2* | cegcc*)
-       # This hack is so that the source file can tell whether it is being
-       # built for inclusion in a dll (and should export symbols for example).
-       m4_if([$1], [GCJ], [],
-       [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-       ;;
- 
-     hpux9* | hpux10* | hpux11*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-       # not for PA HP-UX.
-       case $host_cpu in
-       hppa*64*|ia64*)
-       # +Z the default
-       ;;
-       *)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-       ;;
-       esac
-       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-       ;;
- 
-     irix5* | irix6* | nonstopux*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       # PIC (with -KPIC) is the default.
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-       ;;
- 
-     linux* | k*bsd*-gnu | kopensolaris*-gnu)
-       case $cc_basename in
-       # old Intel for x86_64 which still supported -KPIC.
-       ecc*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-         ;;
-       # icc used to be incompatible with GCC.
-       # ICC 10 doesn't accept -KPIC any more.
-       icc* | ifort*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-         ;;
-       # Lahey Fortran 8.1.
-       lf95*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-       ;;
-       pgcc* | pgf77* | pgf90* | pgf95*)
-         # Portland Group compilers (*not* the Pentium gcc compiler,
-       # which looks to be a dead project)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-         ;;
-       ccc*)
-         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         # All Alpha code is PIC.
-         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-         ;;
-       xl*)
-       # IBM XL C 8.0/Fortran 10.1 on PPC
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-       ;;
-       *)
-       case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)
-         # Sun C 5.9
-         _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-         _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-         _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       *Sun\ F*)
-         # Sun Fortran 8.3 passes all unrecognized flags to the linker
-         _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-         _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-         _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-         ;;
-       esac
-       ;;
-       esac
-       ;;
- 
-     newsos6)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       ;;
- 
-     *nto* | *qnx*)
-       # QNX uses GNU C++, but need to define -shared option too, otherwise
-       # it will coredump.
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-       ;;
- 
-     osf3* | osf4* | osf5*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       # All OSF/1 code is PIC.
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-       ;;
- 
-     rdos*)
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-       ;;
- 
-     solaris*)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       case $cc_basename in
-       f77* | f90* | f95*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-       *)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-       esac
-       ;;
- 
-     sunos4*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       ;;
- 
-     sysv4 | sysv4.2uw2* | sysv4.3*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       ;;
- 
-     sysv4*MP*)
-       if test -d /usr/nec ;then
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       fi
-       ;;
- 
-     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       ;;
- 
-     unicos*)
-       _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-       ;;
- 
-     uts4*)
-       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-       ;;
- 
-     *)
-       _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-       ;;
-     esac
-   fi
- ])
- case $host_os in
-   # For platforms which do not support PIC, -DPIC is meaningless:
-   *djgpp*)
-     _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     ;;
-   *)
-     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-     ;;
- esac
- AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
- _LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-       [How to pass a linker flag through the compiler])
- 
- #
- # Check to make sure the PIC flag actually works.
- #
- if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-   _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-     [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-     [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-     [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-      "" | " "*) ;;
-      *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-      esac],
-     [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
- fi
- _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-       [Additional compiler flags for building library objects])
- 
- #
- # Check to make sure the static flag actually works.
- #
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
- _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-   _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-   $lt_tmp_static_flag,
-   [],
-   [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
- _LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-       [Compiler flag to prevent dynamic linking])
- ])# _LT_COMPILER_PIC
- 
- 
- # _LT_LINKER_SHLIBS([TAGNAME])
- # ----------------------------
- # See if the linker supports building shared libraries.
- m4_defun([_LT_LINKER_SHLIBS],
- [AC_REQUIRE([LT_PATH_LD])dnl
- AC_REQUIRE([LT_PATH_NM])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_EGREP])dnl
- m4_require([_LT_DECL_SED])dnl
- m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
- m4_require([_LT_TAG_COMPILER])dnl
- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- m4_if([$1], [CXX], [
-   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-   case $host_os in
-   aix[[4-9]]*)
-     # If we're using GNU nm, then we don't want the "-C" option.
-     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-     else
-       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-     fi
-     ;;
-   pw32*)
-     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-   ;;
-   cygwin* | mingw* | cegcc*)
-     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-   ;;
-   linux* | k*bsd*-gnu)
-     _LT_TAGVAR(link_all_deplibs, $1)=no
-   ;;
-   *)
-     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-   ;;
-   esac
-   _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- ], [
-   runpath_var=
-   _LT_TAGVAR(allow_undefined_flag, $1)=
-   _LT_TAGVAR(always_export_symbols, $1)=no
-   _LT_TAGVAR(archive_cmds, $1)=
-   _LT_TAGVAR(archive_expsym_cmds, $1)=
-   _LT_TAGVAR(compiler_needs_object, $1)=no
-   _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-   _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-   _LT_TAGVAR(hardcode_automatic, $1)=no
-   _LT_TAGVAR(hardcode_direct, $1)=no
-   _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-   _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-   _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-   _LT_TAGVAR(hardcode_libdir_separator, $1)=
-   _LT_TAGVAR(hardcode_minus_L, $1)=no
-   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-   _LT_TAGVAR(inherit_rpath, $1)=no
-   _LT_TAGVAR(link_all_deplibs, $1)=unknown
-   _LT_TAGVAR(module_cmds, $1)=
-   _LT_TAGVAR(module_expsym_cmds, $1)=
-   _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-   _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-   _LT_TAGVAR(thread_safe_flag_spec, $1)=
-   _LT_TAGVAR(whole_archive_flag_spec, $1)=
-   # include_expsyms should be a list of space-separated symbols to be *always*
-   # included in the symbol list
-   _LT_TAGVAR(include_expsyms, $1)=
-   # exclude_expsyms can be an extended regexp of symbols to exclude
-   # it will be wrapped by ` (' and `)$', so one must not match beginning or
-   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-   # as well as any symbol that contains `d'.
-   _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-   # platforms (ab)use it in PIC code, but their linkers get confused if
-   # the symbol is explicitly referenced.  Since portable code cannot
-   # rely on this symbol name, it's probably fine to never include it in
-   # preloaded symbol tables.
-   # Exclude shared library initialization/finalization symbols.
- dnl Note also adjust exclude_expsyms for C++ above.
-   extract_expsyms_cmds=
- 
-   case $host_os in
-   cygwin* | mingw* | pw32* | cegcc*)
-     # FIXME: the MSVC++ port hasn't been tested in a loooong time
-     # When not using gcc, we currently assume that we are using
-     # Microsoft Visual C++.
-     if test "$GCC" != yes; then
-       with_gnu_ld=no
-     fi
-     ;;
-   interix*)
-     # we just hope/assume this is gcc and not c89 (= MSVC++)
-     with_gnu_ld=yes
-     ;;
-   openbsd*)
-     with_gnu_ld=no
-     ;;
-   linux* | k*bsd*-gnu)
-     _LT_TAGVAR(link_all_deplibs, $1)=no
-     ;;
-   esac
- 
-   _LT_TAGVAR(ld_shlibs, $1)=yes
-   if test "$with_gnu_ld" = yes; then
-     # If archive_cmds runs LD, not CC, wlarc should be empty
-     wlarc='${wl}'
- 
-     # Set some defaults for GNU ld with shared library support. These
-     # are reset later if shared libraries are not supported. Putting them
-     # here allows them to be overridden if necessary.
-     runpath_var=LD_RUN_PATH
-     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-     _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-     # ancient GNU ld didn't support --whole-archive et. al.
-     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-       _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-     else
-       _LT_TAGVAR(whole_archive_flag_spec, $1)=
-     fi
-     supports_anon_versioning=no
-     case `$LD -v 2>&1` in
-       *GNU\ gold*) supports_anon_versioning=yes ;;
-       *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-       *\ 2.11.*) ;; # other 2.11 versions
-       *) supports_anon_versioning=yes ;;
-     esac
- 
-     # See if GNU ld supports shared libraries.
-     case $host_os in
-     aix[[3-9]]*)
-       # On AIX/PPC, the GNU linker is very broken
-       if test "$host_cpu" != ia64; then
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       cat <<_LT_EOF 1>&2
- 
- *** Warning: the GNU linker, at least up to release 2.9.1, is reported
- *** to be unable to reliably create shared libraries on AIX.
- *** Therefore, libtool is disabling shared libraries support.  If you
- *** really care for shared libraries, you may want to modify your PATH
- *** so that a non-GNU linker is found, and then restart.
- 
- _LT_EOF
-       fi
-       ;;
- 
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-             _LT_TAGVAR(archive_expsym_cmds, $1)=''
-         ;;
-       m68k)
-             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-             _LT_TAGVAR(hardcode_minus_L, $1)=yes
-         ;;
-       esac
-       ;;
- 
-     beos*)
-       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-       # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-       # support --undefined.  This deserves some investigation.  FIXME
-       _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       else
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-     cygwin* | mingw* | pw32* | cegcc*)
-       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-       # as there is no search path for DLLs.
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-       _LT_TAGVAR(always_export_symbols, $1)=no
-       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-       _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- 
-       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-       # If the export-symbols file already is a .def file (1st line
-       # is EXPORTS), use it as is; otherwise, prepend...
-       _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-         cp $export_symbols $output_objdir/$soname.def;
-       else
-         echo EXPORTS > $output_objdir/$soname.def;
-         cat $export_symbols >> $output_objdir/$soname.def;
-       fi~
-       $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-       else
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-     interix[[3-9]]*)
-       _LT_TAGVAR(hardcode_direct, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-       # Instead, shared libraries are loaded at an image base (0x10000000 by
-       # default) and relocated if they conflict, which is a slow very memory
-       # consuming and fragmenting process.  To avoid this, we pick a random,
-       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
- 
-     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-       tmp_diet=no
-       if test "$host_os" = linux-dietlibc; then
-       case $cc_basename in
-         diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
-       esac
-       fi
-       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-        && test "$tmp_diet" = no
-       then
-       tmp_addflag=
-       tmp_sharedflag='-shared'
-       case $cc_basename,$host_cpu in
-         pgcc*)                                # Portland Group C compiler
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         tmp_addflag=' $pic_flag'
-         ;;
-       pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         tmp_addflag=' $pic_flag -Mnomain' ;;
-       ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
-         tmp_addflag=' -i_dynamic' ;;
-       efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
-         tmp_addflag=' -i_dynamic -nofor_main' ;;
-       ifc* | ifort*)                  # Intel Fortran compiler
-         tmp_addflag=' -nofor_main' ;;
-       lf95*)                          # Lahey Fortran 8.1
-         _LT_TAGVAR(whole_archive_flag_spec, $1)=
-         tmp_sharedflag='--shared' ;;
-       xl[[cC]]*)                      # IBM XL C 8.0 on PPC (deal with xlf below)
-         tmp_sharedflag='-qmkshrobj'
-         tmp_addflag= ;;
-       esac
-       case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)                       # Sun C 5.9
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         _LT_TAGVAR(compiler_needs_object, $1)=yes
-         tmp_sharedflag='-G' ;;
-       *Sun\ F*)                       # Sun Fortran 8.3
-         tmp_sharedflag='-G' ;;
-       esac
-       _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- 
-         if test "x$supports_anon_versioning" = xyes; then
-           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-           cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-           echo "local: *; };" >> $output_objdir/$libname.ver~
-           $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-         fi
- 
-       case $cc_basename in
-       xlf*)
-         # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-         _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-         _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-         if test "x$supports_anon_versioning" = xyes; then
-           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-             cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-             echo "local: *; };" >> $output_objdir/$libname.ver~
-             $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-         fi
-         ;;
-       esac
-       else
-         _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-     netbsd* | netbsdelf*-gnu)
-       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-       wlarc=
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       fi
-       ;;
- 
-     solaris*)
-       if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       cat <<_LT_EOF 1>&2
- 
- *** Warning: The releases 2.8.* of the GNU linker cannot reliably
- *** create shared libraries on Solaris systems.  Therefore, libtool
- *** is disabling shared libraries support.  We urge you to upgrade GNU
- *** binutils to release 2.9.1 or newer.  Another option is to modify
- *** your PATH or compiler configuration so that the native linker is
- *** used, and then restart.
- 
- _LT_EOF
-       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       else
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-       case `$LD -v 2>&1` in
-         *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       cat <<_LT_EOF 1>&2
- 
- *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
- *** reliably create shared libraries on SCO systems.  Therefore, libtool
- *** is disabling shared libraries support.  We urge you to upgrade GNU
- *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
- *** your PATH or compiler configuration so that the native linker is
- *** used, and then restart.
- 
- _LT_EOF
-       ;;
-       *)
-         # For security reasons, it is highly recommended that you always
-         # use absolute paths for naming shared libraries, and exclude the
-         # DT_RUNPATH tag from executables and libraries.  But doing so
-         # requires that you compile everything twice, which is a pain.
-         if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-         else
-           _LT_TAGVAR(ld_shlibs, $1)=no
-         fi
-       ;;
-       esac
-       ;;
- 
-     sunos4*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-       wlarc=
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     *)
-       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       else
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
-     esac
- 
-     if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-       runpath_var=
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-       _LT_TAGVAR(whole_archive_flag_spec, $1)=
-     fi
-   else
-     # PORTME fill in a description of your system's linker (not GNU ld)
-     case $host_os in
-     aix3*)
-       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-       _LT_TAGVAR(always_export_symbols, $1)=yes
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-       # Note: this linker hardcodes the directories in LIBPATH if there
-       # are no directories specified by -L.
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-       # Neither direct hardcoding nor static linking is supported with a
-       # broken collect2.
-       _LT_TAGVAR(hardcode_direct, $1)=unsupported
-       fi
-       ;;
- 
-     aix[[4-9]]*)
-       if test "$host_cpu" = ia64; then
-       # On IA64, the linker does run time linking by default, so we don't
-       # have to do anything special.
-       aix_use_runtimelinking=no
-       exp_sym_flag='-Bexport'
-       no_entry_flag=""
-       else
-       # If we're using GNU nm, then we don't want the "-C" option.
-       # -C means demangle to AIX nm, but means don't demangle with GNU nm
-       if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-         _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-       else
-         _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-       fi
-       aix_use_runtimelinking=no
- 
-       # Test if we are trying to use run time linking or normal
-       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-       # need to do runtime linking.
-       case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-         for ld_flag in $LDFLAGS; do
-         if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-           aix_use_runtimelinking=yes
-           break
-         fi
-         done
-         ;;
-       esac
- 
-       exp_sym_flag='-bexport'
-       no_entry_flag='-bnoentry'
-       fi
- 
-       # When large executables or shared objects are built, AIX ld can
-       # have problems creating the table of contents.  If linking a library
-       # or program results in "error TOC overflow" add -mminimal-toc to
-       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- 
-       _LT_TAGVAR(archive_cmds, $1)=''
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-       _LT_TAGVAR(link_all_deplibs, $1)=yes
-       _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
- 
-       if test "$GCC" = yes; then
-       case $host_os in aix4.[[012]]|aix4.[[012]].*)
-       # We only want to do this on AIX 4.2 and lower, the check
-       # below for broken collect2 doesn't work under 4.3+
-         collect2name=`${CC} -print-prog-name=collect2`
-         if test -f "$collect2name" &&
-          strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-         then
-         # We have reworked collect2
-         :
-         else
-         # We have old collect2
-         _LT_TAGVAR(hardcode_direct, $1)=unsupported
-         # It fails to find uninstalled libraries when the uninstalled
-         # path is not listed in the libpath.  Setting hardcode_minus_L
-         # to unsupported forces relinking
-         _LT_TAGVAR(hardcode_minus_L, $1)=yes
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-         _LT_TAGVAR(hardcode_libdir_separator, $1)=
-         fi
-         ;;
-       esac
-       shared_flag='-shared'
-       if test "$aix_use_runtimelinking" = yes; then
-         shared_flag="$shared_flag "'${wl}-G'
-       fi
-       _LT_TAGVAR(link_all_deplibs, $1)=no
-       else
-       # not using gcc
-       if test "$host_cpu" = ia64; then
-       # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-       # chokes on -Wl,-G. The following line is correct:
-         shared_flag='-G'
-       else
-         if test "$aix_use_runtimelinking" = yes; then
-           shared_flag='${wl}-G'
-         else
-           shared_flag='${wl}-bM:SRE'
-         fi
-       fi
-       fi
- 
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-       # It seems that -bexpall does not export symbols beginning with
-       # underscore (_), so it is better to generate a list of symbols to export.
-       _LT_TAGVAR(always_export_symbols, $1)=yes
-       if test "$aix_use_runtimelinking" = yes; then
-       # Warning - without using the other runtime loading flags (-brtl),
-       # -berok will link without error, but may produce a broken library.
-       _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-         # Determine the default libpath from the value encoded in an
-         # empty executable.
-         _LT_SYS_MODULE_PATH_AIX
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-       if test "$host_cpu" = ia64; then
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-         _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-         _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-       else
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-         # Warning - without using the other run time loading flags,
-         # -berok will link without error, but may produce a broken library.
-         _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-         _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-         # Exported symbols can be pulled into shared objects from archives
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-         _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-         # This is similar to how AIX traditionally builds its shared libraries.
-         _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-       fi
-       fi
-       ;;
- 
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-             _LT_TAGVAR(archive_expsym_cmds, $1)=''
-         ;;
-       m68k)
-             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-             _LT_TAGVAR(hardcode_minus_L, $1)=yes
-         ;;
-       esac
-       ;;
- 
-     bsdi[[45]]*)
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-       ;;
- 
-     cygwin* | mingw* | pw32* | cegcc*)
-       # When not using gcc, we currently assume that we are using
-       # Microsoft Visual C++.
-       # hardcode_libdir_flag_spec is actually meaningless, as there is
-       # no search path for DLLs.
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-       # Tell ltmain to make .lib files, not .a files.
-       libext=lib
-       # Tell ltmain to make .dll files, not .so files.
-       shrext_cmds=".dll"
-       # FIXME: Setting linknames here is a bad hack.
-       _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-       # The linker will automatically build a .lib file if we build a DLL.
-       _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-       # FIXME: Should let the user specify the lib program.
-       _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-       _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-       ;;
- 
-     darwin* | rhapsody*)
-       _LT_DARWIN_LINKER_FEATURES($1)
-       ;;
- 
-     dgux*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     freebsd1*)
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       ;;
- 
-     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-     # support.  Future versions do this automatically, but an explicit c++rt0.o
-     # does not break anything, and helps significantly (at the cost of a little
-     # extra space).
-     freebsd2.2*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-     freebsd2*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-     freebsd* | dragonfly*)
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     hpux9*)
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-       fi
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       _LT_TAGVAR(hardcode_direct, $1)=yes
- 
-       # hardcode_minus_L: Not really in the search PATH,
-       # but as the default location of the library.
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       ;;
- 
-     hpux10*)
-       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-       fi
-       if test "$with_gnu_ld" = no; then
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       # hardcode_minus_L: Not really in the search PATH,
-       # but as the default location of the library.
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       fi
-       ;;
- 
-     hpux11*)
-       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-       case $host_cpu in
-       hppa*64*)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       ia64*)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       *)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       esac
-       else
-       case $host_cpu in
-       hppa*64*)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       ia64*)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       *)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       esac
-       fi
-       if test "$with_gnu_ld" = no; then
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-       case $host_cpu in
-       hppa*64*|ia64*)
-         _LT_TAGVAR(hardcode_direct, $1)=no
-         _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-         ;;
-       *)
-         _LT_TAGVAR(hardcode_direct, $1)=yes
-         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- 
-         # hardcode_minus_L: Not really in the search PATH,
-         # but as the default location of the library.
-         _LT_TAGVAR(hardcode_minus_L, $1)=yes
-         ;;
-       esac
-       fi
-       ;;
- 
-     irix5* | irix6* | nonstopux*)
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       # Try to use the -exported_symbol ld option, if it does not
-       # work, assume that -exports_file does not work either and
-       # implicitly export all symbols.
-         save_LDFLAGS="$LDFLAGS"
-         LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-         AC_LINK_IFELSE(int foo(void) {},
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-         )
-         LDFLAGS="$save_LDFLAGS"
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-       fi
-       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       _LT_TAGVAR(inherit_rpath, $1)=yes
-       _LT_TAGVAR(link_all_deplibs, $1)=yes
-       ;;
- 
-     netbsd* | netbsdelf*-gnu)
-       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-       fi
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     newsos6)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     *nto* | *qnx*)
-       ;;
- 
-     openbsd*)
-       if test -f /usr/libexec/ld.so; then
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-       if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       else
-         case $host_os in
-          openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-            _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-            ;;
-          *)
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-            ;;
-         esac
-       fi
-       else
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-     os2*)
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-       _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-       ;;
- 
-     osf3*)
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       else
-       _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       fi
-       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       ;;
- 
-     osf4* | osf5*)    # as osf3* with the addition of -msym flag
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-       else
-       _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-       $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
- 
-       # Both c and cxx compiler support -rpath directly
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-       fi
-       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-       ;;
- 
-     solaris*)
-       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-       if test "$GCC" = yes; then
-       wlarc='${wl}'
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-       else
-       case `$CC -V 2>&1` in
-       *"Compilers 5.0"*)
-         wlarc=''
-         _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-         ;;
-       *)
-         wlarc='${wl}'
-         _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-         ;;
-       esac
-       fi
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       case $host_os in
-       solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-       *)
-       # The compiler driver will combine and reorder linker options,
-       # but understands `-z linker_flag'.  GCC discards it without `$wl',
-       # but is careful enough not to reorder.
-       # Supported since Solaris 2.6 (maybe 2.5.1?)
-       if test "$GCC" = yes; then
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-       else
-         _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-       fi
-       ;;
-       esac
-       _LT_TAGVAR(link_all_deplibs, $1)=yes
-       ;;
- 
-     sunos4*)
-       if test "x$host_vendor" = xsequent; then
-       # Use $CC to link under sequent, because it throws in some extra .o
-       # files that make .init and .fini sections work.
-       _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-       fi
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-       _LT_TAGVAR(hardcode_direct, $1)=yes
-       _LT_TAGVAR(hardcode_minus_L, $1)=yes
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     sysv4)
-       case $host_vendor in
-       sni)
-         _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-       ;;
-       siemens)
-         ## LD is ld it makes a PLAMLIB
-         ## CC just makes a GrossModule.
-         _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-         _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-         _LT_TAGVAR(hardcode_direct, $1)=no
-         ;;
-       motorola)
-         _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-       ;;
-       esac
-       runpath_var='LD_RUN_PATH'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     sysv4.3*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-       ;;
- 
-     sysv4*MP*)
-       if test -d /usr/nec; then
-       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       runpath_var=LD_RUN_PATH
-       hardcode_runpath_var=yes
-       _LT_TAGVAR(ld_shlibs, $1)=yes
-       fi
-       ;;
- 
-     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       runpath_var='LD_RUN_PATH'
- 
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       fi
-       ;;
- 
-     sysv5* | sco3.2v5* | sco5v6*)
-       # Note: We can NOT use -z defs as we might desire, because we do not
-       # link with -lc, and that would cause any symbols used from libc to
-       # always be unresolved, which means just about no library would
-       # ever link correctly.  If we're not using GNU ld we use -z text
-       # though, which does catch some bad symbols but isn't as heavy-handed
-       # as -z defs.
-       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-       _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-       _LT_TAGVAR(link_all_deplibs, $1)=yes
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-       runpath_var='LD_RUN_PATH'
- 
-       if test "$GCC" = yes; then
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       fi
-       ;;
- 
-     uts4*)
-       _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       ;;
- 
-     *)
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       ;;
-     esac
- 
-     if test x$host_vendor = xsni; then
-       case $host in
-       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-       ;;
-       esac
-     fi
-   fi
- ])
- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
- 
- _LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
- 
- _LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
- _LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
- _LT_DECL([], [extract_expsyms_cmds], [2],
-     [The commands to extract the exported symbol list from a shared archive])
- 
- #
- # Do we need to explicitly link libc?
- #
- case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
- x|xyes)
-   # Assume -lc should be added
-   _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- 
-   if test "$enable_shared" = yes && test "$GCC" = yes; then
-     case $_LT_TAGVAR(archive_cmds, $1) in
-     *'~'*)
-       # FIXME: we may have to deal with multi-command sequences.
-       ;;
-     '$CC '*)
-       # Test whether the compiler implicitly links with -lc since on some
-       # systems, -lgcc has to come before -lc. If gcc already passes -lc
-       # to ld, don't add -lc before -lgcc.
-       AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-       $RM conftest*
-       echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- 
-       if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-         soname=conftest
-         lib=conftest
-         libobjs=conftest.$ac_objext
-         deplibs=
-         wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-       pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-         compiler_flags=-v
-         linker_flags=-v
-         verstring=
-         output_objdir=.
-         libname=conftest
-         lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-         _LT_TAGVAR(allow_undefined_flag, $1)=
-         if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-         then
-         _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-         else
-         _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-         fi
-         _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-       else
-         cat conftest.err 1>&5
-       fi
-       $RM conftest*
-       AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
-       ;;
-     esac
-   fi
-   ;;
- esac
- 
- _LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-     [Whether or not to add -lc for building shared libraries])
- _LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-     [enable_shared_with_static_runtimes], [0],
-     [Whether or not to disallow shared libs when runtime libs are static])
- _LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-     [Compiler flag to allow reflexive dlopens])
- _LT_TAGDECL([], [whole_archive_flag_spec], [1],
-     [Compiler flag to generate shared objects directly from archives])
- _LT_TAGDECL([], [compiler_needs_object], [1],
-     [Whether the compiler copes with passing no objects directly])
- _LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-     [Create an old-style archive from a shared archive])
- _LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-     [Create a temporary old-style archive to link instead of a shared archive])
- _LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
- _LT_TAGDECL([], [archive_expsym_cmds], [2])
- _LT_TAGDECL([], [module_cmds], [2],
-     [Commands used to build a loadable module if different from building
-     a shared archive.])
- _LT_TAGDECL([], [module_expsym_cmds], [2])
- _LT_TAGDECL([], [with_gnu_ld], [1],
-     [Whether we are building with GNU ld or not])
- _LT_TAGDECL([], [allow_undefined_flag], [1],
-     [Flag that allows shared libraries with undefined symbols to be built])
- _LT_TAGDECL([], [no_undefined_flag], [1],
-     [Flag that enforces no undefined symbols])
- _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-     [Flag to hardcode $libdir into a binary during linking.
-     This must work even if $libdir does not exist])
- _LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-     [[If ld is used when linking, flag to hardcode $libdir into a binary
-     during linking.  This must work even if $libdir does not exist]])
- _LT_TAGDECL([], [hardcode_libdir_separator], [1],
-     [Whether we need a single "-rpath" flag with a separated argument])
- _LT_TAGDECL([], [hardcode_direct], [0],
-     [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-     DIR into the resulting binary])
- _LT_TAGDECL([], [hardcode_direct_absolute], [0],
-     [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-     DIR into the resulting binary and the resulting library dependency is
-     "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-     library is relocated])
- _LT_TAGDECL([], [hardcode_minus_L], [0],
-     [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-     into the resulting binary])
- _LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-     [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-     into the resulting binary])
- _LT_TAGDECL([], [hardcode_automatic], [0],
-     [Set to "yes" if building a shared library automatically hardcodes DIR
-     into the library and all subsequent libraries and executables linked
-     against it])
- _LT_TAGDECL([], [inherit_rpath], [0],
-     [Set to yes if linker adds runtime paths of dependent libraries
-     to runtime path list])
- _LT_TAGDECL([], [link_all_deplibs], [0],
-     [Whether libtool must link a program against all its dependency libraries])
- _LT_TAGDECL([], [fix_srcfile_path], [1],
-     [Fix the shell variable $srcfile for the compiler])
- _LT_TAGDECL([], [always_export_symbols], [0],
-     [Set to "yes" if exported symbols are required])
- _LT_TAGDECL([], [export_symbols_cmds], [2],
-     [The commands to list exported symbols])
- _LT_TAGDECL([], [exclude_expsyms], [1],
-     [Symbols that should not be listed in the preloaded symbols])
- _LT_TAGDECL([], [include_expsyms], [1],
-     [Symbols that must always be exported])
- _LT_TAGDECL([], [prelink_cmds], [2],
-     [Commands necessary for linking programs (against libraries) with templates])
- _LT_TAGDECL([], [file_list_spec], [1],
-     [Specify filename containing input files])
- dnl FIXME: Not yet implemented
- dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
- dnl    [Compiler flag to generate thread safe objects])
- ])# _LT_LINKER_SHLIBS
- 
- 
- # _LT_LANG_C_CONFIG([TAG])
- # ------------------------
- # Ensure that the configuration variables for a C compiler are suitably
- # defined.  These variables are subsequently used by _LT_CONFIG to write
- # the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_C_CONFIG],
- [m4_require([_LT_DECL_EGREP])dnl
- lt_save_CC="$CC"
- AC_LANG_PUSH(C)
- 
- # Source file extension for C test sources.
- ac_ext=c
- 
- # Object file extension for compiled C test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="int some_variable = 0;"
- 
- # Code to be used in simple link tests
- lt_simple_link_test_code='int main(){return(0);}'
- 
- _LT_TAG_COMPILER
- # Save the default compiler, since it gets overwritten when the other
- # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
- compiler_DEFAULT=$CC
- 
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
- 
- if test -n "$compiler"; then
-   _LT_COMPILER_NO_RTTI($1)
-   _LT_COMPILER_PIC($1)
-   _LT_COMPILER_C_O($1)
-   _LT_COMPILER_FILE_LOCKS($1)
-   _LT_LINKER_SHLIBS($1)
-   _LT_SYS_DYNAMIC_LINKER($1)
-   _LT_LINKER_HARDCODE_LIBPATH($1)
-   LT_SYS_DLOPEN_SELF
-   _LT_CMD_STRIPLIB
- 
-   # Report which library types will actually be built
-   AC_MSG_CHECKING([if libtool supports shared libraries])
-   AC_MSG_RESULT([$can_build_shared])
- 
-   AC_MSG_CHECKING([whether to build shared libraries])
-   test "$can_build_shared" = "no" && enable_shared=no
- 
-   # On AIX, shared libraries and static libraries use the same namespace, and
-   # are all built from PIC.
-   case $host_os in
-   aix3*)
-     test "$enable_shared" = yes && enable_static=no
-     if test -n "$RANLIB"; then
-       archive_cmds="$archive_cmds~\$RANLIB \$lib"
-       postinstall_cmds='$RANLIB $lib'
-     fi
-     ;;
- 
-   aix[[4-9]]*)
-     if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-       test "$enable_shared" = yes && enable_static=no
-     fi
-     ;;
-   esac
-   AC_MSG_RESULT([$enable_shared])
- 
-   AC_MSG_CHECKING([whether to build static libraries])
-   # Make sure either enable_shared or enable_static is yes.
-   test "$enable_shared" = yes || enable_static=yes
-   AC_MSG_RESULT([$enable_static])
- 
-   _LT_CONFIG($1)
- fi
- AC_LANG_POP
- CC="$lt_save_CC"
- ])# _LT_LANG_C_CONFIG
- 
- 
- # _LT_PROG_CXX
- # ------------
- # Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
- # compiler, we have our own version here.
- m4_defun([_LT_PROG_CXX],
- [
- pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
- AC_PROG_CXX
- if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-     (test "X$CXX" != "Xg++"))) ; then
-   AC_PROG_CXXCPP
- else
-   _lt_caught_CXX_error=yes
- fi
- popdef([AC_MSG_ERROR])
- ])# _LT_PROG_CXX
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([_LT_PROG_CXX], [])
- 
- 
- # _LT_LANG_CXX_CONFIG([TAG])
- # --------------------------
- # Ensure that the configuration variables for a C++ compiler are suitably
- # defined.  These variables are subsequently used by _LT_CONFIG to write
- # the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_CXX_CONFIG],
- [AC_REQUIRE([_LT_PROG_CXX])dnl
- m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- m4_require([_LT_DECL_EGREP])dnl
- 
- AC_LANG_PUSH(C++)
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(allow_undefined_flag, $1)=
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(archive_expsym_cmds, $1)=
- _LT_TAGVAR(compiler_needs_object, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_TAGVAR(hardcode_minus_L, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(hardcode_automatic, $1)=no
- _LT_TAGVAR(inherit_rpath, $1)=no
- _LT_TAGVAR(module_cmds, $1)=
- _LT_TAGVAR(module_expsym_cmds, $1)=
- _LT_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
- _LT_TAGVAR(no_undefined_flag, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- 
- # Source file extension for C++ test sources.
- ac_ext=cpp
- 
- # Object file extension for compiled C++ test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # No sense in running all these tests if we already determined that
- # the CXX compiler isn't working.  Some variables (like enable_shared)
- # are currently assumed to apply to all compilers on this platform,
- # and will be corrupted by setting them based on a non-working compiler.
- if test "$_lt_caught_CXX_error" != yes; then
-   # Code to be used in simple compile tests
-   lt_simple_compile_test_code="int some_variable = 0;"
- 
-   # Code to be used in simple link tests
-   lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
- 
-   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-   _LT_TAG_COMPILER
- 
-   # save warnings/boilerplate of simple test code
-   _LT_COMPILER_BOILERPLATE
-   _LT_LINKER_BOILERPLATE
- 
-   # Allow CC to be a program name with arguments.
-   lt_save_CC=$CC
-   lt_save_LD=$LD
-   lt_save_GCC=$GCC
-   GCC=$GXX
-   lt_save_with_gnu_ld=$with_gnu_ld
-   lt_save_path_LD=$lt_cv_path_LD
-   if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-     lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-   else
-     $as_unset lt_cv_prog_gnu_ld
-   fi
-   if test -n "${lt_cv_path_LDCXX+set}"; then
-     lt_cv_path_LD=$lt_cv_path_LDCXX
-   else
-     $as_unset lt_cv_path_LD
-   fi
-   test -z "${LDCXX+set}" || LD=$LDCXX
-   CC=${CXX-"c++"}
-   compiler=$CC
-   _LT_TAGVAR(compiler, $1)=$CC
-   _LT_CC_BASENAME([$compiler])
- 
-   if test -n "$compiler"; then
-     # We don't want -fno-exception when compiling C++ code, so set the
-     # no_builtin_flag separately
-     if test "$GXX" = yes; then
-       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-     else
-       _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-     fi
- 
-     if test "$GXX" = yes; then
-       # Set up default GNU C++ configuration
- 
-       LT_PATH_LD
- 
-       # Check if GNU C++ uses GNU ld as the underlying linker, since the
-       # archiving commands below assume that GNU ld is being used.
-       if test "$with_gnu_ld" = yes; then
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- 
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- 
-         # If archive_cmds runs LD, not CC, wlarc should be empty
-         # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-         #     investigate it a little bit more. (MM)
-         wlarc='${wl}'
- 
-         # ancient GNU ld didn't support --whole-archive et. al.
-         if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-         $GREP 'no-whole-archive' > /dev/null; then
-           _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-         else
-           _LT_TAGVAR(whole_archive_flag_spec, $1)=
-         fi
-       else
-         with_gnu_ld=no
-         wlarc=
- 
-         # A generic and very simple default shared library creation
-         # command for GNU C++ for the case where it uses the native
-         # linker, instead of GNU ld.  If possible, this setting should
-         # overridden to take advantage of the native linker features on
-         # the platform it is being used on.
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-       fi
- 
-       # Commands to make compiler produce verbose output that lists
-       # what "hidden" libraries, object files and flags are used when
-       # linking a shared library.
-       output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- 
-     else
-       GXX=no
-       with_gnu_ld=no
-       wlarc=
-     fi
- 
-     # PORTME: fill in a description of your system's C++ link characteristics
-     AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-     _LT_TAGVAR(ld_shlibs, $1)=yes
-     case $host_os in
-       aix3*)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
-       aix[[4-9]]*)
-         if test "$host_cpu" = ia64; then
-           # On IA64, the linker does run time linking by default, so we don't
-           # have to do anything special.
-           aix_use_runtimelinking=no
-           exp_sym_flag='-Bexport'
-           no_entry_flag=""
-         else
-           aix_use_runtimelinking=no
- 
-           # Test if we are trying to use run time linking or normal
-           # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-           # need to do runtime linking.
-           case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-           for ld_flag in $LDFLAGS; do
-             case $ld_flag in
-             *-brtl*)
-               aix_use_runtimelinking=yes
-               break
-               ;;
-             esac
-           done
-           ;;
-           esac
- 
-           exp_sym_flag='-bexport'
-           no_entry_flag='-bnoentry'
-         fi
- 
-         # When large executables or shared objects are built, AIX ld can
-         # have problems creating the table of contents.  If linking a library
-         # or program results in "error TOC overflow" add -mminimal-toc to
-         # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-         # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
- 
-         _LT_TAGVAR(archive_cmds, $1)=''
-         _LT_TAGVAR(hardcode_direct, $1)=yes
-         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-         _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-         _LT_TAGVAR(link_all_deplibs, $1)=yes
-         _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
- 
-         if test "$GXX" = yes; then
-           case $host_os in aix4.[[012]]|aix4.[[012]].*)
-           # We only want to do this on AIX 4.2 and lower, the check
-           # below for broken collect2 doesn't work under 4.3+
-         collect2name=`${CC} -print-prog-name=collect2`
-         if test -f "$collect2name" &&
-            strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-         then
-           # We have reworked collect2
-           :
-         else
-           # We have old collect2
-           _LT_TAGVAR(hardcode_direct, $1)=unsupported
-           # It fails to find uninstalled libraries when the uninstalled
-           # path is not listed in the libpath.  Setting hardcode_minus_L
-           # to unsupported forces relinking
-           _LT_TAGVAR(hardcode_minus_L, $1)=yes
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-           _LT_TAGVAR(hardcode_libdir_separator, $1)=
-         fi
-           esac
-           shared_flag='-shared'
-         if test "$aix_use_runtimelinking" = yes; then
-           shared_flag="$shared_flag "'${wl}-G'
-         fi
-         else
-           # not using gcc
-           if test "$host_cpu" = ia64; then
-         # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-         # chokes on -Wl,-G. The following line is correct:
-         shared_flag='-G'
-           else
-           if test "$aix_use_runtimelinking" = yes; then
-             shared_flag='${wl}-G'
-           else
-             shared_flag='${wl}-bM:SRE'
-           fi
-           fi
-         fi
- 
-         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-         # It seems that -bexpall does not export symbols beginning with
-         # underscore (_), so it is better to generate a list of symbols to
-       # export.
-         _LT_TAGVAR(always_export_symbols, $1)=yes
-         if test "$aix_use_runtimelinking" = yes; then
-           # Warning - without using the other runtime loading flags (-brtl),
-           # -berok will link without error, but may produce a broken library.
-           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-           # Determine the default libpath from the value encoded in an empty
-           # executable.
-           _LT_SYS_MODULE_PATH_AIX
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- 
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-         else
-           if test "$host_cpu" = ia64; then
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-           _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-           _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-           else
-           # Determine the default libpath from the value encoded in an
-           # empty executable.
-           _LT_SYS_MODULE_PATH_AIX
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-           # Warning - without using the other run time loading flags,
-           # -berok will link without error, but may produce a broken library.
-           _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-           _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-           # Exported symbols can be pulled into shared objects from archives
-           _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-           _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-           # This is similar to how AIX traditionally builds its shared
-           # libraries.
-           _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-           fi
-         fi
-         ;;
- 
-       beos*)
-       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-         _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-         # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-         # support --undefined.  This deserves some investigation.  FIXME
-         _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       else
-         _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-       chorus*)
-         case $cc_basename in
-           *)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
-         esac
-         ;;
- 
-       cygwin* | mingw* | pw32* | cegcc*)
-         # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-         # as there is no search path for DLLs.
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-         _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-         _LT_TAGVAR(always_export_symbols, $1)=no
-         _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- 
-         if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-           # If the export-symbols file already is a .def file (1st line
-           # is EXPORTS), use it as is; otherwise, prepend...
-           _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-           cp $export_symbols $output_objdir/$soname.def;
-           else
-           echo EXPORTS > $output_objdir/$soname.def;
-           cat $export_symbols >> $output_objdir/$soname.def;
-           fi~
-           $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-         else
-           _LT_TAGVAR(ld_shlibs, $1)=no
-         fi
-         ;;
-       darwin* | rhapsody*)
-         _LT_DARWIN_LINKER_FEATURES($1)
-       ;;
- 
-       dgux*)
-         case $cc_basename in
-           ec++*)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           ghcx*)
-           # Green Hills C++ Compiler
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           *)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-         esac
-         ;;
- 
-       freebsd[[12]]*)
-         # C++ shared libraries reported to be fairly broken before
-       # switch to ELF
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
- 
-       freebsd-elf*)
-         _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-         ;;
- 
-       freebsd* | dragonfly*)
-         # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-         # conventions
-         _LT_TAGVAR(ld_shlibs, $1)=yes
-         ;;
- 
-       gnu*)
-         ;;
- 
-       hpux9*)
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-         _LT_TAGVAR(hardcode_direct, $1)=yes
-         _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                                            # but as the default
-                                            # location of the library.
- 
-         case $cc_basename in
-           CC*)
-             # FIXME: insert proper C++ library support
-             _LT_TAGVAR(ld_shlibs, $1)=no
-             ;;
-           aCC*)
-             _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-             # Commands to make compiler produce verbose output that lists
-             # what "hidden" libraries, object files and flags are used when
-             # linking a shared library.
-             #
-             # There doesn't appear to be a way to prevent this compiler from
-             # explicitly linking system object files so we need to strip them
-             # from the output so that they don't get included in the library
-             # dependencies.
-             output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-             ;;
-           *)
-             if test "$GXX" = yes; then
-               _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-             else
-               # FIXME: insert proper C++ library support
-               _LT_TAGVAR(ld_shlibs, $1)=no
-             fi
-             ;;
-         esac
-         ;;
- 
-       hpux10*|hpux11*)
-         if test $with_gnu_ld = no; then
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-           case $host_cpu in
-             hppa*64*|ia64*)
-               ;;
-             *)
-             _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-               ;;
-           esac
-         fi
-         case $host_cpu in
-           hppa*64*|ia64*)
-             _LT_TAGVAR(hardcode_direct, $1)=no
-             _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-             ;;
-           *)
-             _LT_TAGVAR(hardcode_direct, $1)=yes
-             _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-             _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-                                                # but as the default
-                                                # location of the library.
-             ;;
-         esac
- 
-         case $cc_basename in
-           CC*)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           aCC*)
-           case $host_cpu in
-             hppa*64*)
-               _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-               ;;
-             ia64*)
-               _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-               ;;
-             *)
-               _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-               ;;
-           esac
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           #
-           # There doesn't appear to be a way to prevent this compiler from
-           # explicitly linking system object files so we need to strip them
-           # from the output so that they don't get included in the library
-           # dependencies.
-           output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-           ;;
-           *)
-           if test "$GXX" = yes; then
-             if test $with_gnu_ld = no; then
-               case $host_cpu in
-                 hppa*64*)
-                   _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                   ;;
-                 ia64*)
-                   _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                   ;;
-                 *)
-                   _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-                   ;;
-               esac
-             fi
-           else
-             # FIXME: insert proper C++ library support
-             _LT_TAGVAR(ld_shlibs, $1)=no
-           fi
-           ;;
-         esac
-         ;;
- 
-       interix[[3-9]]*)
-       _LT_TAGVAR(hardcode_direct, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-       # Instead, shared libraries are loaded at an image base (0x10000000 by
-       # default) and relocated if they conflict, which is a slow very memory
-       # consuming and fragmenting process.  To avoid this, we pick a random,
-       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-       _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
-       irix5* | irix6*)
-         case $cc_basename in
-           CC*)
-           # SGI C++
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
- 
-           # Archives containing C++ object files must be created using
-           # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-           # necessary to make sure instantiated templates are included
-           # in the archive.
-           _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-           ;;
-           *)
-           if test "$GXX" = yes; then
-             if test "$with_gnu_ld" = no; then
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-             else
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
-             fi
-           fi
-           _LT_TAGVAR(link_all_deplibs, $1)=yes
-           ;;
-         esac
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-         _LT_TAGVAR(inherit_rpath, $1)=yes
-         ;;
- 
-       linux* | k*bsd*-gnu | kopensolaris*-gnu)
-         case $cc_basename in
-           KCC*)
-           # Kuck and Associates, Inc. (KAI) C++ Compiler
- 
-           # KCC will only create a shared library if the output file
-           # ends with ".so" (or ".sl" for HP-UX), so rename the library
-           # to its proper name (with version) after linking.
-           _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           #
-           # There doesn't appear to be a way to prevent this compiler from
-           # explicitly linking system object files so we need to strip them
-           # from the output so that they don't get included in the library
-           # dependencies.
-           output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
- 
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-           _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- 
-           # Archives containing C++ object files must be created using
-           # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-           _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-           ;;
-         icpc* | ecpc* )
-           # Intel C++
-           with_gnu_ld=yes
-           # version 8.0 and above of icpc choke on multiply defined symbols
-           # if we add $predep_objects and $postdep_objects, however 7.1 and
-           # earlier do not add the objects themselves.
-           case `$CC -V 2>&1` in
-             *"Version 7."*)
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-               _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-               ;;
-             *)  # Version 8.0 or newer
-               tmp_idyn=
-               case $host_cpu in
-                 ia64*) tmp_idyn=' -i_dynamic';;
-               esac
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-               _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-               ;;
-           esac
-           _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-           _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-           _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-           ;;
-           pgCC* | pgcpp*)
-             # Portland Group C++ compiler
-           case `$CC -V` in
-           *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
-             _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-               rm -rf $tpldir~
-               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-               compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-             _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-               rm -rf $tpldir~
-               $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-               $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-               $RANLIB $oldlib'
-             _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-               rm -rf $tpldir~
-               $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-               $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-             _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-               rm -rf $tpldir~
-               $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-               $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-             ;;
-           *) # Version 6 will use weak symbols
-             _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-             _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-             ;;
-           esac
- 
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-           _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-           _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-             ;;
-         cxx*)
-           # Compaq C++
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
- 
-           runpath_var=LD_RUN_PATH
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-           _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           #
-           # There doesn't appear to be a way to prevent this compiler from
-           # explicitly linking system object files so we need to strip them
-           # from the output so that they don't get included in the library
-           # dependencies.
-           output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-           ;;
-         xl*)
-           # IBM XL 8.0 on PPC, with GNU ld
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-           _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-           _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-           if test "x$supports_anon_versioning" = xyes; then
-             _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-               cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-               echo "local: *; };" >> $output_objdir/$libname.ver~
-               $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-           fi
-           ;;
-         *)
-           case `$CC -V 2>&1 | sed 5q` in
-           *Sun\ C*)
-             # Sun C++ 5.9
-             _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-             _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-             _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-             _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-             _LT_TAGVAR(compiler_needs_object, $1)=yes
- 
-             # Not sure whether something based on
-             # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-             # would be better.
-             output_verbose_link_cmd='echo'
- 
-             # Archives containing C++ object files must be created using
-             # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-             # necessary to make sure instantiated templates are included
-             # in the archive.
-             _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-             ;;
-           esac
-           ;;
-       esac
-       ;;
- 
-       lynxos*)
-         # FIXME: insert proper C++ library support
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       ;;
- 
-       m88k*)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-       ;;
- 
-       mvs*)
-         case $cc_basename in
-           cxx*)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-         *)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-       esac
-       ;;
- 
-       netbsd*)
-         if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-         _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-         wlarc=
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-         _LT_TAGVAR(hardcode_direct, $1)=yes
-         _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       fi
-       # Workaround some broken pre-1.5 toolchains
-       output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-       ;;
- 
-       *nto* | *qnx*)
-         _LT_TAGVAR(ld_shlibs, $1)=yes
-       ;;
- 
-       openbsd2*)
-         # C++ shared libraries are fairly broken
-       _LT_TAGVAR(ld_shlibs, $1)=no
-       ;;
- 
-       openbsd*)
-       if test -f /usr/libexec/ld.so; then
-         _LT_TAGVAR(hardcode_direct, $1)=yes
-         _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-         _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-         if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-           _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-           _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-         fi
-         output_verbose_link_cmd=echo
-       else
-         _LT_TAGVAR(ld_shlibs, $1)=no
-       fi
-       ;;
- 
-       osf3* | osf4* | osf5*)
-         case $cc_basename in
-           KCC*)
-           # Kuck and Associates, Inc. (KAI) C++ Compiler
- 
-           # KCC will only create a shared library if the output file
-           # ends with ".so" (or ".sl" for HP-UX), so rename the library
-           # to its proper name (with version) after linking.
-           _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- 
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-           _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-           # Archives containing C++ object files must be created using
-           # the KAI C++ compiler.
-           case $host in
-             osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-             *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-           esac
-           ;;
-           RCC*)
-           # Rational C++ 2.4.1
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           cxx*)
-           case $host in
-             osf3*)
-               _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-               _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-               ;;
-             *)
-               _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-               _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-                 echo "-hidden">> $lib.exp~
-                 $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
-                 $RM $lib.exp'
-               _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-               ;;
-           esac
- 
-           _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-           # Commands to make compiler produce verbose output that lists
-           # what "hidden" libraries, object files and flags are used when
-           # linking a shared library.
-           #
-           # There doesn't appear to be a way to prevent this compiler from
-           # explicitly linking system object files so we need to strip them
-           # from the output so that they don't get included in the library
-           # dependencies.
-           output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-           ;;
-         *)
-           if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-             _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-             case $host in
-               osf3*)
-                 _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-                 ;;
-               *)
-                 _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-                 ;;
-             esac
- 
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-             _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- 
-             # Commands to make compiler produce verbose output that lists
-             # what "hidden" libraries, object files and flags are used when
-             # linking a shared library.
-             output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
- 
-           else
-             # FIXME: insert proper C++ library support
-             _LT_TAGVAR(ld_shlibs, $1)=no
-           fi
-           ;;
-         esac
-         ;;
- 
-       psos*)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
- 
-       sunos4*)
-         case $cc_basename in
-           CC*)
-           # Sun C++ 4.x
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           lcc*)
-           # Lucid
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           *)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-         esac
-         ;;
- 
-       solaris*)
-         case $cc_basename in
-           CC*)
-           # Sun C++ 4.2, 5.x and Centerline C++
-             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-           _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-           _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-             $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
- 
-           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-           _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-           case $host_os in
-             solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-             *)
-               # The compiler driver will combine and reorder linker options,
-               # but understands `-z linker_flag'.
-               # Supported since Solaris 2.6 (maybe 2.5.1?)
-               _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-               ;;
-           esac
-           _LT_TAGVAR(link_all_deplibs, $1)=yes
- 
-           output_verbose_link_cmd='echo'
- 
-           # Archives containing C++ object files must be created using
-           # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-           # necessary to make sure instantiated templates are included
-           # in the archive.
-           _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-           ;;
-           gcx*)
-           # Green Hills C++ Compiler
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- 
-           # The C++ compiler must be used to create the archive.
-           _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-           ;;
-           *)
-           # GNU C++ compiler with Solaris linker
-           if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-             _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-             if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-               _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-               _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-                 $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
- 
-               # Commands to make compiler produce verbose output that lists
-               # what "hidden" libraries, object files and flags are used when
-               # linking a shared library.
-               output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-             else
-               # g++ 2.7 appears to require `-G' NOT `-shared' on this
-               # platform.
-               _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-               _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-                 $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
- 
-               # Commands to make compiler produce verbose output that lists
-               # what "hidden" libraries, object files and flags are used when
-               # linking a shared library.
-               output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-             fi
- 
-             _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-             case $host_os in
-               solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-               *)
-                 _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-                 ;;
-             esac
-           fi
-           ;;
-         esac
-         ;;
- 
-     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       runpath_var='LD_RUN_PATH'
- 
-       case $cc_basename in
-         CC*)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       *)
-         _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-         _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       esac
-       ;;
- 
-       sysv5* | sco3.2v5* | sco5v6*)
-       # Note: We can NOT use -z defs as we might desire, because we do not
-       # link with -lc, and that would cause any symbols used from libc to
-       # always be unresolved, which means just about no library would
-       # ever link correctly.  If we're not using GNU ld we use -z text
-       # though, which does catch some bad symbols but isn't as heavy-handed
-       # as -z defs.
-       _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-       _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-       _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-       _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-       _LT_TAGVAR(link_all_deplibs, $1)=yes
-       _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-       runpath_var='LD_RUN_PATH'
- 
-       case $cc_basename in
-           CC*)
-           _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-           ;;
-         *)
-           _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-           _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-           ;;
-       esac
-       ;;
- 
-       tandem*)
-         case $cc_basename in
-           NCC*)
-           # NonStop-UX NCC 3.20
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-           *)
-           # FIXME: insert proper C++ library support
-           _LT_TAGVAR(ld_shlibs, $1)=no
-           ;;
-         esac
-         ;;
- 
-       vxworks*)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
- 
-       *)
-         # FIXME: insert proper C++ library support
-         _LT_TAGVAR(ld_shlibs, $1)=no
-         ;;
-     esac
- 
-     AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-     test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
- 
-     _LT_TAGVAR(GCC, $1)="$GXX"
-     _LT_TAGVAR(LD, $1)="$LD"
- 
-     ## CAVEAT EMPTOR:
-     ## There is no encapsulation within the following macros, do not change
-     ## the running order or otherwise move them around unless you know exactly
-     ## what you are doing...
-     _LT_SYS_HIDDEN_LIBDEPS($1)
-     _LT_COMPILER_PIC($1)
-     _LT_COMPILER_C_O($1)
-     _LT_COMPILER_FILE_LOCKS($1)
-     _LT_LINKER_SHLIBS($1)
-     _LT_SYS_DYNAMIC_LINKER($1)
-     _LT_LINKER_HARDCODE_LIBPATH($1)
- 
-     _LT_CONFIG($1)
-   fi # test -n "$compiler"
- 
-   CC=$lt_save_CC
-   LDCXX=$LD
-   LD=$lt_save_LD
-   GCC=$lt_save_GCC
-   with_gnu_ld=$lt_save_with_gnu_ld
-   lt_cv_path_LDCXX=$lt_cv_path_LD
-   lt_cv_path_LD=$lt_save_path_LD
-   lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-   lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
- fi # test "$_lt_caught_CXX_error" != yes
- 
- AC_LANG_POP
- ])# _LT_LANG_CXX_CONFIG
- 
- 
- # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
- # ---------------------------------
- # Figure out "hidden" library dependencies from verbose
- # compiler output when linking a shared library.
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
- m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
- [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
- # Dependencies to place before and after the object being linked:
- _LT_TAGVAR(predep_objects, $1)=
- _LT_TAGVAR(postdep_objects, $1)=
- _LT_TAGVAR(predeps, $1)=
- _LT_TAGVAR(postdeps, $1)=
- _LT_TAGVAR(compiler_lib_search_path, $1)=
- 
- dnl we can't use the lt_simple_compile_test_code here,
- dnl because it contains code intended for an executable,
- dnl not a library.  It's possible we should let each
- dnl tag define a new lt_????_link_test_code variable,
- dnl but it's only used here...
- m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
- int a;
- void foo (void) { a = 0; }
- _LT_EOF
- ], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
- class Foo
- {
- public:
-   Foo (void) { a = 0; }
- private:
-   int a;
- };
- _LT_EOF
- ], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-       subroutine foo
-       implicit none
-       integer*4 a
-       a=0
-       return
-       end
- _LT_EOF
- ], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-       subroutine foo
-       implicit none
-       integer a
-       a=0
-       return
-       end
- _LT_EOF
- ], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
- public class foo {
-   private int a;
-   public void bar (void) {
-     a = 0;
-   }
- };
- _LT_EOF
- ])
- dnl Parse the compiler output and extract the necessary
- dnl objects, libraries and library flags.
- if AC_TRY_EVAL(ac_compile); then
-   # Parse the compiler output and extract the necessary
-   # objects, libraries and library flags.
- 
-   # Sentinel used to keep track of whether or not we are before
-   # the conftest object file.
-   pre_test_object_deps_done=no
- 
-   for p in `eval "$output_verbose_link_cmd"`; do
-     case $p in
- 
-     -L* | -R* | -l*)
-        # Some compilers place space between "-{L,R}" and the path.
-        # Remove the space.
-        if test $p = "-L" ||
-           test $p = "-R"; then
-        prev=$p
-        continue
-        else
-        prev=
-        fi
- 
-        if test "$pre_test_object_deps_done" = no; then
-        case $p in
-        -L* | -R*)
-          # Internal compiler library paths should come after those
-          # provided the user.  The postdeps already come after the
-          # user supplied libs so there is no need to process them.
-          if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-            _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-          else
-            _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-          fi
-          ;;
-        # The "-l" case would never come before the object being
-        # linked, so don't bother handling this case.
-        esac
-        else
-        if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-          _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-        else
-          _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-        fi
-        fi
-        ;;
- 
-     *.$objext)
-        # This assumes that the test object file only shows up
-        # once in the compiler output.
-        if test "$p" = "conftest.$objext"; then
-        pre_test_object_deps_done=yes
-        continue
-        fi
- 
-        if test "$pre_test_object_deps_done" = no; then
-        if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-          _LT_TAGVAR(predep_objects, $1)="$p"
-        else
-          _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-        fi
-        else
-        if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-          _LT_TAGVAR(postdep_objects, $1)="$p"
-        else
-          _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-        fi
-        fi
-        ;;
- 
-     *) ;; # Ignore the rest.
- 
-     esac
-   done
- 
-   # Clean up.
-   rm -f a.out a.exe
- else
-   echo "libtool.m4: error: problem compiling $1 test program"
- fi
- 
- $RM -f confest.$objext
- 
- # PORTME: override above test on systems where it is broken
- m4_if([$1], [CXX],
- [case $host_os in
- interix[[3-9]]*)
-   # Interix 3.5 installs completely hosed .la files for C++, so rather than
-   # hack all around it, let's just trust "g++" to DTRT.
-   _LT_TAGVAR(predep_objects,$1)=
-   _LT_TAGVAR(postdep_objects,$1)=
-   _LT_TAGVAR(postdeps,$1)=
-   ;;
- 
- linux*)
-   case `$CC -V 2>&1 | sed 5q` in
-   *Sun\ C*)
-     # Sun C++ 5.9
- 
-     # The more standards-conforming stlport4 library is
-     # incompatible with the Cstd library. Avoid specifying
-     # it if it's in CXXFLAGS. Ignore libCrun as
-     # -library=stlport4 depends on it.
-     case " $CXX $CXXFLAGS " in
-     *" -library=stlport4 "*)
-       solaris_use_stlport4=yes
-       ;;
-     esac
- 
-     if test "$solaris_use_stlport4" != yes; then
-       _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-     fi
-     ;;
-   esac
-   ;;
- 
- solaris*)
-   case $cc_basename in
-   CC*)
-     # The more standards-conforming stlport4 library is
-     # incompatible with the Cstd library. Avoid specifying
-     # it if it's in CXXFLAGS. Ignore libCrun as
-     # -library=stlport4 depends on it.
-     case " $CXX $CXXFLAGS " in
-     *" -library=stlport4 "*)
-       solaris_use_stlport4=yes
-       ;;
-     esac
- 
-     # Adding this requires a known-good setup of shared libraries for
-     # Sun compiler versions before 5.6, else PIC objects from an old
-     # archive will be linked into the output, leading to subtle bugs.
-     if test "$solaris_use_stlport4" != yes; then
-       _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-     fi
-     ;;
-   esac
-   ;;
- esac
- ])
- 
- case " $_LT_TAGVAR(postdeps, $1) " in
- *" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
- esac
-  _LT_TAGVAR(compiler_lib_search_dirs, $1)=
- if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
-  _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
- fi
- _LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-     [The directories searched by this compiler when creating a shared library])
- _LT_TAGDECL([], [predep_objects], [1],
-     [Dependencies to place before and after the objects being linked to
-     create a shared library])
- _LT_TAGDECL([], [postdep_objects], [1])
- _LT_TAGDECL([], [predeps], [1])
- _LT_TAGDECL([], [postdeps], [1])
- _LT_TAGDECL([], [compiler_lib_search_path], [1],
-     [The library search path used internally by the compiler when linking
-     a shared library])
- ])# _LT_SYS_HIDDEN_LIBDEPS
- 
- 
- # _LT_PROG_F77
- # ------------
- # Since AC_PROG_F77 is broken, in that it returns the empty string
- # if there is no fortran compiler, we have our own version here.
- m4_defun([_LT_PROG_F77],
- [
- pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
- AC_PROG_F77
- if test -z "$F77" || test "X$F77" = "Xno"; then
-   _lt_disable_F77=yes
- fi
- popdef([AC_MSG_ERROR])
- ])# _LT_PROG_F77
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([_LT_PROG_F77], [])
- 
- 
- # _LT_LANG_F77_CONFIG([TAG])
- # --------------------------
- # Ensure that the configuration variables for a Fortran 77 compiler are
- # suitably defined.  These variables are subsequently used by _LT_CONFIG
- # to write the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_F77_CONFIG],
- [AC_REQUIRE([_LT_PROG_F77])dnl
- AC_LANG_PUSH(Fortran 77)
- 
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(allow_undefined_flag, $1)=
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(archive_expsym_cmds, $1)=
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_TAGVAR(hardcode_minus_L, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=no
- _LT_TAGVAR(inherit_rpath, $1)=no
- _LT_TAGVAR(module_cmds, $1)=
- _LT_TAGVAR(module_expsym_cmds, $1)=
- _LT_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
- _LT_TAGVAR(no_undefined_flag, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- 
- # Source file extension for f77 test sources.
- ac_ext=f
- 
- # Object file extension for compiled f77 test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # No sense in running all these tests if we already determined that
- # the F77 compiler isn't working.  Some variables (like enable_shared)
- # are currently assumed to apply to all compilers on this platform,
- # and will be corrupted by setting them based on a non-working compiler.
- if test "$_lt_disable_F77" != yes; then
-   # Code to be used in simple compile tests
-   lt_simple_compile_test_code="\
-       subroutine t
-       return
-       end
- "
- 
-   # Code to be used in simple link tests
-   lt_simple_link_test_code="\
-       program t
-       end
- "
- 
-   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-   _LT_TAG_COMPILER
- 
-   # save warnings/boilerplate of simple test code
-   _LT_COMPILER_BOILERPLATE
-   _LT_LINKER_BOILERPLATE
- 
-   # Allow CC to be a program name with arguments.
-   lt_save_CC="$CC"
-   lt_save_GCC=$GCC
-   CC=${F77-"f77"}
-   compiler=$CC
-   _LT_TAGVAR(compiler, $1)=$CC
-   _LT_CC_BASENAME([$compiler])
-   GCC=$G77
-   if test -n "$compiler"; then
-     AC_MSG_CHECKING([if libtool supports shared libraries])
-     AC_MSG_RESULT([$can_build_shared])
- 
-     AC_MSG_CHECKING([whether to build shared libraries])
-     test "$can_build_shared" = "no" && enable_shared=no
- 
-     # On AIX, shared libraries and static libraries use the same namespace, and
-     # are all built from PIC.
-     case $host_os in
-       aix3*)
-         test "$enable_shared" = yes && enable_static=no
-         if test -n "$RANLIB"; then
-           archive_cmds="$archive_cmds~\$RANLIB \$lib"
-           postinstall_cmds='$RANLIB $lib'
-         fi
-         ;;
-       aix[[4-9]]*)
-       if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-         test "$enable_shared" = yes && enable_static=no
-       fi
-         ;;
-     esac
-     AC_MSG_RESULT([$enable_shared])
- 
-     AC_MSG_CHECKING([whether to build static libraries])
-     # Make sure either enable_shared or enable_static is yes.
-     test "$enable_shared" = yes || enable_static=yes
-     AC_MSG_RESULT([$enable_static])
- 
-     _LT_TAGVAR(GCC, $1)="$G77"
-     _LT_TAGVAR(LD, $1)="$LD"
- 
-     ## CAVEAT EMPTOR:
-     ## There is no encapsulation within the following macros, do not change
-     ## the running order or otherwise move them around unless you know exactly
-     ## what you are doing...
-     _LT_COMPILER_PIC($1)
-     _LT_COMPILER_C_O($1)
-     _LT_COMPILER_FILE_LOCKS($1)
-     _LT_LINKER_SHLIBS($1)
-     _LT_SYS_DYNAMIC_LINKER($1)
-     _LT_LINKER_HARDCODE_LIBPATH($1)
- 
-     _LT_CONFIG($1)
-   fi # test -n "$compiler"
- 
-   GCC=$lt_save_GCC
-   CC="$lt_save_CC"
- fi # test "$_lt_disable_F77" != yes
- 
- AC_LANG_POP
- ])# _LT_LANG_F77_CONFIG
- 
- 
- # _LT_PROG_FC
- # -----------
- # Since AC_PROG_FC is broken, in that it returns the empty string
- # if there is no fortran compiler, we have our own version here.
- m4_defun([_LT_PROG_FC],
- [
- pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
- AC_PROG_FC
- if test -z "$FC" || test "X$FC" = "Xno"; then
-   _lt_disable_FC=yes
- fi
- popdef([AC_MSG_ERROR])
- ])# _LT_PROG_FC
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([_LT_PROG_FC], [])
- 
- 
- # _LT_LANG_FC_CONFIG([TAG])
- # -------------------------
- # Ensure that the configuration variables for a Fortran compiler are
- # suitably defined.  These variables are subsequently used by _LT_CONFIG
- # to write the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_FC_CONFIG],
- [AC_REQUIRE([_LT_PROG_FC])dnl
- AC_LANG_PUSH(Fortran)
- 
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(allow_undefined_flag, $1)=
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(archive_expsym_cmds, $1)=
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_TAGVAR(hardcode_minus_L, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=no
- _LT_TAGVAR(inherit_rpath, $1)=no
- _LT_TAGVAR(module_cmds, $1)=
- _LT_TAGVAR(module_expsym_cmds, $1)=
- _LT_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
- _LT_TAGVAR(no_undefined_flag, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- 
- # Source file extension for fc test sources.
- ac_ext=${ac_fc_srcext-f}
- 
- # Object file extension for compiled fc test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # No sense in running all these tests if we already determined that
- # the FC compiler isn't working.  Some variables (like enable_shared)
- # are currently assumed to apply to all compilers on this platform,
- # and will be corrupted by setting them based on a non-working compiler.
- if test "$_lt_disable_FC" != yes; then
-   # Code to be used in simple compile tests
-   lt_simple_compile_test_code="\
-       subroutine t
-       return
-       end
- "
- 
-   # Code to be used in simple link tests
-   lt_simple_link_test_code="\
-       program t
-       end
- "
- 
-   # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-   _LT_TAG_COMPILER
- 
-   # save warnings/boilerplate of simple test code
-   _LT_COMPILER_BOILERPLATE
-   _LT_LINKER_BOILERPLATE
- 
-   # Allow CC to be a program name with arguments.
-   lt_save_CC="$CC"
-   lt_save_GCC=$GCC
-   CC=${FC-"f95"}
-   compiler=$CC
-   GCC=$ac_cv_fc_compiler_gnu
- 
-   _LT_TAGVAR(compiler, $1)=$CC
-   _LT_CC_BASENAME([$compiler])
- 
-   if test -n "$compiler"; then
-     AC_MSG_CHECKING([if libtool supports shared libraries])
-     AC_MSG_RESULT([$can_build_shared])
- 
-     AC_MSG_CHECKING([whether to build shared libraries])
-     test "$can_build_shared" = "no" && enable_shared=no
- 
-     # On AIX, shared libraries and static libraries use the same namespace, and
-     # are all built from PIC.
-     case $host_os in
-       aix3*)
-         test "$enable_shared" = yes && enable_static=no
-         if test -n "$RANLIB"; then
-           archive_cmds="$archive_cmds~\$RANLIB \$lib"
-           postinstall_cmds='$RANLIB $lib'
-         fi
-         ;;
-       aix[[4-9]]*)
-       if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-         test "$enable_shared" = yes && enable_static=no
-       fi
-         ;;
-     esac
-     AC_MSG_RESULT([$enable_shared])
- 
-     AC_MSG_CHECKING([whether to build static libraries])
-     # Make sure either enable_shared or enable_static is yes.
-     test "$enable_shared" = yes || enable_static=yes
-     AC_MSG_RESULT([$enable_static])
- 
-     _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-     _LT_TAGVAR(LD, $1)="$LD"
- 
-     ## CAVEAT EMPTOR:
-     ## There is no encapsulation within the following macros, do not change
-     ## the running order or otherwise move them around unless you know exactly
-     ## what you are doing...
-     _LT_SYS_HIDDEN_LIBDEPS($1)
-     _LT_COMPILER_PIC($1)
-     _LT_COMPILER_C_O($1)
-     _LT_COMPILER_FILE_LOCKS($1)
-     _LT_LINKER_SHLIBS($1)
-     _LT_SYS_DYNAMIC_LINKER($1)
-     _LT_LINKER_HARDCODE_LIBPATH($1)
- 
-     _LT_CONFIG($1)
-   fi # test -n "$compiler"
- 
-   GCC=$lt_save_GCC
-   CC="$lt_save_CC"
- fi # test "$_lt_disable_FC" != yes
- 
- AC_LANG_POP
- ])# _LT_LANG_FC_CONFIG
- 
- 
- # _LT_LANG_GCJ_CONFIG([TAG])
- # --------------------------
- # Ensure that the configuration variables for the GNU Java Compiler compiler
- # are suitably defined.  These variables are subsequently used by _LT_CONFIG
- # to write the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_GCJ_CONFIG],
- [AC_REQUIRE([LT_PROG_GCJ])dnl
- AC_LANG_SAVE
- 
- # Source file extension for Java test sources.
- ac_ext=java
- 
- # Object file extension for compiled Java test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="class foo {}"
- 
- # Code to be used in simple link tests
- lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
- 
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
- 
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
- 
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- GCC=yes
- CC=${GCJ-"gcj"}
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_TAGVAR(LD, $1)="$LD"
- _LT_CC_BASENAME([$compiler])
- 
- # GCJ did not exist at the time GCC didn't implicitly link libc in.
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- 
- _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
- 
- if test -n "$compiler"; then
-   _LT_COMPILER_NO_RTTI($1)
-   _LT_COMPILER_PIC($1)
-   _LT_COMPILER_C_O($1)
-   _LT_COMPILER_FILE_LOCKS($1)
-   _LT_LINKER_SHLIBS($1)
-   _LT_LINKER_HARDCODE_LIBPATH($1)
- 
-   _LT_CONFIG($1)
- fi
- 
- AC_LANG_RESTORE
- 
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
- ])# _LT_LANG_GCJ_CONFIG
- 
- 
- # _LT_LANG_RC_CONFIG([TAG])
- # -------------------------
- # Ensure that the configuration variables for the Windows resource compiler
- # are suitably defined.  These variables are subsequently used by _LT_CONFIG
- # to write the compiler configuration to `libtool'.
- m4_defun([_LT_LANG_RC_CONFIG],
- [AC_REQUIRE([LT_PROG_RC])dnl
- AC_LANG_SAVE
- 
- # Source file extension for RC test sources.
- ac_ext=rc
- 
- # Object file extension for compiled RC test sources.
- objext=o
- _LT_TAGVAR(objext, $1)=$objext
- 
- # Code to be used in simple compile tests
- lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
- 
- # Code to be used in simple link tests
- lt_simple_link_test_code="$lt_simple_compile_test_code"
- 
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
- 
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
- 
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- GCC=
- CC=${RC-"windres"}
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- 
- if test -n "$compiler"; then
-   :
-   _LT_CONFIG($1)
- fi
- 
- GCC=$lt_save_GCC
- AC_LANG_RESTORE
- CC="$lt_save_CC"
- ])# _LT_LANG_RC_CONFIG
- 
- 
- # LT_PROG_GCJ
- # -----------
- AC_DEFUN([LT_PROG_GCJ],
- [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-   [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-     [AC_CHECK_TOOL(GCJ, gcj,)
-       test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-       AC_SUBST(GCJFLAGS)])])[]dnl
- ])
- 
- # Old name:
- AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
- 
- 
- # LT_PROG_RC
- # ----------
- AC_DEFUN([LT_PROG_RC],
- [AC_CHECK_TOOL(RC, windres,)
- ])
- 
- # Old name:
- AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([LT_AC_PROG_RC], [])
- 
- 
- # _LT_DECL_EGREP
- # --------------
- # If we don't have a new enough Autoconf to choose the best grep
- # available, choose the one first in the user's PATH.
- m4_defun([_LT_DECL_EGREP],
- [AC_REQUIRE([AC_PROG_EGREP])dnl
- AC_REQUIRE([AC_PROG_FGREP])dnl
- test -z "$GREP" && GREP=grep
- _LT_DECL([], [GREP], [1], [A grep program that handles long lines])
- _LT_DECL([], [EGREP], [1], [An ERE matcher])
- _LT_DECL([], [FGREP], [1], [A literal string matcher])
- dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
- AC_SUBST([GREP])
- ])
- 
- 
- # _LT_DECL_OBJDUMP
- # --------------
- # If we don't have a new enough Autoconf to choose the best objdump
- # available, choose the one first in the user's PATH.
- m4_defun([_LT_DECL_OBJDUMP],
- [AC_CHECK_TOOL(OBJDUMP, objdump, false)
- test -z "$OBJDUMP" && OBJDUMP=objdump
- _LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
- AC_SUBST([OBJDUMP])
- ])
- 
- 
- # _LT_DECL_SED
- # ------------
- # Check for a fully-functional sed program, that truncates
- # as few characters as possible.  Prefer GNU sed if found.
- m4_defun([_LT_DECL_SED],
- [AC_PROG_SED
- test -z "$SED" && SED=sed
- Xsed="$SED -e 1s/^X//"
- _LT_DECL([], [SED], [1], [A sed program that does not truncate output])
- _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-     [Sed that helps us avoid accidentally triggering echo(1) options like -n])
- ])# _LT_DECL_SED
- 
- m4_ifndef([AC_PROG_SED], [
- # NOTE: This macro has been submitted for inclusion into   #
- #  GNU Autoconf as AC_PROG_SED.  When it is available in   #
- #  a released version of Autoconf we should remove this    #
- #  macro and use it instead.                               #
- 
- m4_defun([AC_PROG_SED],
- [AC_MSG_CHECKING([for a sed that does not truncate output])
- AC_CACHE_VAL(lt_cv_path_SED,
- [# Loop through the user's path and test for sed and gsed.
- # Then use that list of sed's as ones to test for truncation.
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-   for lt_ac_prog in sed gsed; do
-     for ac_exec_ext in '' $ac_executable_extensions; do
-       if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-         lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-       fi
-     done
-   done
- done
- IFS=$as_save_IFS
- lt_ac_max=0
- lt_ac_count=0
- # Add /usr/xpg4/bin/sed as it is typically found on Solaris
- # along with /bin/sed that truncates output.
- for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-   test ! -f $lt_ac_sed && continue
-   cat /dev/null > conftest.in
-   lt_ac_count=0
-   echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-   # Check for GNU sed and select it if it is found.
-   if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-     lt_cv_path_SED=$lt_ac_sed
-     break
-   fi
-   while true; do
-     cat conftest.in conftest.in >conftest.tmp
-     mv conftest.tmp conftest.in
-     cp conftest.in conftest.nl
-     echo >>conftest.nl
-     $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-     cmp -s conftest.out conftest.nl || break
-     # 10000 chars as input seems more than enough
-     test $lt_ac_count -gt 10 && break
-     lt_ac_count=`expr $lt_ac_count + 1`
-     if test $lt_ac_count -gt $lt_ac_max; then
-       lt_ac_max=$lt_ac_count
-       lt_cv_path_SED=$lt_ac_sed
-     fi
-   done
- done
- ])
- SED=$lt_cv_path_SED
- AC_SUBST([SED])
- AC_MSG_RESULT([$SED])
- ])#AC_PROG_SED
- ])#m4_ifndef
- 
- # Old name:
- AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([LT_AC_PROG_SED], [])
- 
- 
- # _LT_CHECK_SHELL_FEATURES
- # ------------------------
- # Find out whether the shell is Bourne or XSI compatible,
- # or has some other useful features.
- m4_defun([_LT_CHECK_SHELL_FEATURES],
- [AC_MSG_CHECKING([whether the shell understands some XSI constructs])
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-   test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-       = c,a/b,, \
-     && eval 'test $(( 1 + 1 )) -eq 2 \
-     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-   && xsi_shell=yes
- AC_MSG_RESULT([$xsi_shell])
- _LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
- 
- AC_MSG_CHECKING([whether the shell understands "+="])
- lt_shell_append=no
- ( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-     >/dev/null 2>&1 \
-   && lt_shell_append=yes
- AC_MSG_RESULT([$lt_shell_append])
- _LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
- 
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-   lt_unset=unset
- else
-   lt_unset=false
- fi
- _LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
- 
- # test EBCDIC or ASCII
- case `echo X|tr X '\101'` in
-  A) # ASCII based system
-     # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-   lt_SP2NL='tr \040 \012'
-   lt_NL2SP='tr \015\012 \040\040'
-   ;;
-  *) # EBCDIC based system
-   lt_SP2NL='tr \100 \n'
-   lt_NL2SP='tr \r\n \100\100'
-   ;;
- esac
- _LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
- _LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
- ])# _LT_CHECK_SHELL_FEATURES
- 
- 
- # _LT_PROG_XSI_SHELLFNS
- # ---------------------
- # Bourne and XSI compatible variants of some useful shell functions.
- m4_defun([_LT_PROG_XSI_SHELLFNS],
- [case $xsi_shell in
-   yes)
-     cat << \_LT_EOF >> "$cfgfile"
- 
- # func_dirname file append nondir_replacement
- # Compute the dirname of FILE.  If nonempty, add APPEND to the result,
- # otherwise set result to NONDIR_REPLACEMENT.
- func_dirname ()
- {
-   case ${1} in
-     */*) func_dirname_result="${1%/*}${2}" ;;
-     *  ) func_dirname_result="${3}" ;;
-   esac
- }
- 
- # func_basename file
- func_basename ()
- {
-   func_basename_result="${1##*/}"
- }
- 
- # func_dirname_and_basename file append nondir_replacement
- # perform func_basename and func_dirname in a single function
- # call:
- #   dirname:  Compute the dirname of FILE.  If nonempty,
- #             add APPEND to the result, otherwise set result
- #             to NONDIR_REPLACEMENT.
- #             value returned in "$func_dirname_result"
- #   basename: Compute filename of FILE.
- #             value retuned in "$func_basename_result"
- # Implementation must be kept synchronized with func_dirname
- # and func_basename. For efficiency, we do not delegate to
- # those functions but instead duplicate the functionality here.
- func_dirname_and_basename ()
- {
-   case ${1} in
-     */*) func_dirname_result="${1%/*}${2}" ;;
-     *  ) func_dirname_result="${3}" ;;
-   esac
-   func_basename_result="${1##*/}"
- }
- 
- # func_stripname prefix suffix name
- # strip PREFIX and SUFFIX off of NAME.
- # PREFIX and SUFFIX must not contain globbing or regex special
- # characters, hashes, percent signs, but SUFFIX may contain a leading
- # dot (in which case that matches only a dot).
- func_stripname ()
- {
-   # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-   # positional parameters, so assign one to ordinary parameter first.
-   func_stripname_result=${3}
-   func_stripname_result=${func_stripname_result#"${1}"}
-   func_stripname_result=${func_stripname_result%"${2}"}
- }
- 
- # func_opt_split
- func_opt_split ()
- {
-   func_opt_split_opt=${1%%=*}
-   func_opt_split_arg=${1#*=}
- }
- 
- # func_lo2o object
- func_lo2o ()
- {
-   case ${1} in
-     *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-     *)    func_lo2o_result=${1} ;;
-   esac
- }
- 
- # func_xform libobj-or-source
- func_xform ()
- {
-   func_xform_result=${1%.*}.lo
- }
- 
- # func_arith arithmetic-term...
- func_arith ()
- {
-   func_arith_result=$(( $[*] ))
- }
- 
- # func_len string
- # STRING may not start with a hyphen.
- func_len ()
- {
-   func_len_result=${#1}
- }
- 
- _LT_EOF
-     ;;
-   *) # Bourne compatible functions.
-     cat << \_LT_EOF >> "$cfgfile"
- 
- # func_dirname file append nondir_replacement
- # Compute the dirname of FILE.  If nonempty, add APPEND to the result,
- # otherwise set result to NONDIR_REPLACEMENT.
- func_dirname ()
- {
-   # Extract subdirectory from the argument.
-   func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-   if test "X$func_dirname_result" = "X${1}"; then
-     func_dirname_result="${3}"
-   else
-     func_dirname_result="$func_dirname_result${2}"
-   fi
- }
- 
- # func_basename file
- func_basename ()
- {
-   func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
- }
- 
- dnl func_dirname_and_basename
- dnl A portable version of this function is already defined in general.m4sh
- dnl so there is no need for it here.
- 
- # func_stripname prefix suffix name
- # strip PREFIX and SUFFIX off of NAME.
- # PREFIX and SUFFIX must not contain globbing or regex special
- # characters, hashes, percent signs, but SUFFIX may contain a leading
- # dot (in which case that matches only a dot).
- # func_strip_suffix prefix name
- func_stripname ()
- {
-   case ${2} in
-     .*) func_stripname_result=`$ECHO "X${3}" \
-            | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-     *)  func_stripname_result=`$ECHO "X${3}" \
-            | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-   esac
- }
- 
- # sed scripts:
- my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^-[[^=]]*=//'
- 
- # func_opt_split
- func_opt_split ()
- {
-   func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-   func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
- }
- 
- # func_lo2o object
- func_lo2o ()
- {
-   func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
- }
- 
- # func_xform libobj-or-source
- func_xform ()
- {
-   func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
- }
- 
- # func_arith arithmetic-term...
- func_arith ()
- {
-   func_arith_result=`expr "$[@]"`
- }
- 
- # func_len string
- # STRING may not start with a hyphen.
- func_len ()
- {
-   func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
- }
- 
- _LT_EOF
- esac
- 
- case $lt_shell_append in
-   yes)
-     cat << \_LT_EOF >> "$cfgfile"
- 
- # func_append var value
- # Append VALUE to the end of shell variable VAR.
- func_append ()
- {
-   eval "$[1]+=\$[2]"
- }
- _LT_EOF
-     ;;
-   *)
-     cat << \_LT_EOF >> "$cfgfile"
- 
- # func_append var value
- # Append VALUE to the end of shell variable VAR.
- func_append ()
- {
-   eval "$[1]=\$$[1]\$[2]"
- }
- 
- _LT_EOF
-     ;;
-   esac
- ])
- 
- # Helper functions for option handling.                    -*- Autoconf -*-
- #
- #   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
- #   Written by Gary V. Vaughan, 2004
- #
- # This file is free software; the Free Software Foundation gives
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
- 
- # serial 6 ltoptions.m4
- 
- # This is to help aclocal find these macros, as it can't see m4_define.
- AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
- 
- 
- # _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
- # ------------------------------------------
- m4_define([_LT_MANGLE_OPTION],
- [[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
- 
- 
- # _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
- # ---------------------------------------
- # Set option OPTION-NAME for macro MACRO-NAME, and if there is a
- # matching handler defined, dispatch to it.  Other OPTION-NAMEs are
- # saved as a flag.
- m4_define([_LT_SET_OPTION],
- [m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
- m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
-         _LT_MANGLE_DEFUN([$1], [$2]),
-     [m4_warning([Unknown $1 option `$2'])])[]dnl
- ])
- 
- 
- # _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
- # ------------------------------------------------------------
- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
- m4_define([_LT_IF_OPTION],
- [m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
- 
- 
- # _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
- # -------------------------------------------------------
- # Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
- # are set.
- m4_define([_LT_UNLESS_OPTIONS],
- [m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-           [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
-                     [m4_define([$0_found])])])[]dnl
- m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
- ])[]dnl
- ])
- 
- 
- # _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
- # ----------------------------------------
- # OPTION-LIST is a space-separated list of Libtool options associated
- # with MACRO-NAME.  If any OPTION has a matching handler declared with
- # LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
- # the unknown option and exit.
- m4_defun([_LT_SET_OPTIONS],
- [# Set options
- m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
-     [_LT_SET_OPTION([$1], _LT_Option)])
- 
- m4_if([$1],[LT_INIT],[
-   dnl
-   dnl Simply set some default values (i.e off) if boolean options were not
-   dnl specified:
-   _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
-   ])
-   _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
-   ])
-   dnl
-   dnl If no reference was made to various pairs of opposing options, then
-   dnl we run the default mode handler for the pair.  For example, if neither
-   dnl `shared' nor `disable-shared' was passed, we enable building of shared
-   dnl archives by default:
-   _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
-   _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
-   _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
-   _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
-                  [_LT_ENABLE_FAST_INSTALL])
-   ])
- ])# _LT_SET_OPTIONS
- 
- 
- 
- # _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
- # -----------------------------------------
- m4_define([_LT_MANGLE_DEFUN],
- [[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
- 
- 
- # LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
- # -----------------------------------------------
- m4_define([LT_OPTION_DEFINE],
- [m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
- ])# LT_OPTION_DEFINE
- 
- 
- # dlopen
- # ------
- LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
- ])
- 
- AU_DEFUN([AC_LIBTOOL_DLOPEN],
- [_LT_SET_OPTION([LT_INIT], [dlopen])
- AC_DIAGNOSE([obsolete],
- [$0: Remove this warning and the call to _LT_SET_OPTION when you
- put the `dlopen' option into LT_INIT's first parameter.])
- ])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
- 
- 
- # win32-dll
- # ---------
- # Declare package support for building win32 dll's.
- LT_OPTION_DEFINE([LT_INIT], [win32-dll],
- [enable_win32_dll=yes
- 
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
-   AC_CHECK_TOOL(AS, as, false)
-   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-   AC_CHECK_TOOL(OBJDUMP, objdump, false)
-   ;;
- esac
- 
- test -z "$AS" && AS=as
- _LT_DECL([], [AS],      [0], [Assembler program])dnl
- 
- test -z "$DLLTOOL" && DLLTOOL=dlltool
- _LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
- 
- test -z "$OBJDUMP" && OBJDUMP=objdump
- _LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
- ])# win32-dll
- 
- AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
- [AC_REQUIRE([AC_CANONICAL_HOST])dnl
- _LT_SET_OPTION([LT_INIT], [win32-dll])
- AC_DIAGNOSE([obsolete],
- [$0: Remove this warning and the call to _LT_SET_OPTION when you
- put the `win32-dll' option into LT_INIT's first parameter.])
- ])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
- 
- 
- # _LT_ENABLE_SHARED([DEFAULT])
- # ----------------------------
- # implement the --enable-shared flag, and supports the `shared' and
- # `disable-shared' LT_INIT options.
- # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
- m4_define([_LT_ENABLE_SHARED],
- [m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
- AC_ARG_ENABLE([shared],
-     [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-       [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
-     [p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_shared=yes ;;
-     no) enable_shared=no ;;
-     *)
-       enable_shared=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_shared=yes
-       fi
-       done
-       IFS="$lt_save_ifs"
-       ;;
-     esac],
-     [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
- 
-     _LT_DECL([build_libtool_libs], [enable_shared], [0],
-       [Whether or not to build shared libraries])
- ])# _LT_ENABLE_SHARED
- 
- LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
- LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
- 
- # Old names:
- AC_DEFUN([AC_ENABLE_SHARED],
- [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
- ])
- 
- AC_DEFUN([AC_DISABLE_SHARED],
- [_LT_SET_OPTION([LT_INIT], [disable-shared])
- ])
- 
- AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
- AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AM_ENABLE_SHARED], [])
- dnl AC_DEFUN([AM_DISABLE_SHARED], [])
- 
- 
- 
- # _LT_ENABLE_STATIC([DEFAULT])
- # ----------------------------
- # implement the --enable-static flag, and support the `static' and
- # `disable-static' LT_INIT options.
- # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
- m4_define([_LT_ENABLE_STATIC],
- [m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
- AC_ARG_ENABLE([static],
-     [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-       [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
-     [p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_static=yes ;;
-     no) enable_static=no ;;
-     *)
-      enable_static=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_static=yes
-       fi
-       done
-       IFS="$lt_save_ifs"
-       ;;
-     esac],
-     [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
- 
-     _LT_DECL([build_old_libs], [enable_static], [0],
-       [Whether or not to build static libraries])
- ])# _LT_ENABLE_STATIC
- 
- LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
- LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
- 
- # Old names:
- AC_DEFUN([AC_ENABLE_STATIC],
- [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
- ])
- 
- AC_DEFUN([AC_DISABLE_STATIC],
- [_LT_SET_OPTION([LT_INIT], [disable-static])
- ])
- 
- AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
- AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AM_ENABLE_STATIC], [])
- dnl AC_DEFUN([AM_DISABLE_STATIC], [])
- 
- 
- 
- # _LT_ENABLE_FAST_INSTALL([DEFAULT])
- # ----------------------------------
- # implement the --enable-fast-install flag, and support the `fast-install'
- # and `disable-fast-install' LT_INIT options.
- # DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
- m4_define([_LT_ENABLE_FAST_INSTALL],
- [m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
- AC_ARG_ENABLE([fast-install],
-     [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-     [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-     [p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_fast_install=yes ;;
-     no) enable_fast_install=no ;;
-     *)
-       enable_fast_install=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_fast_install=yes
-       fi
-       done
-       IFS="$lt_save_ifs"
-       ;;
-     esac],
-     [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
- 
- _LT_DECL([fast_install], [enable_fast_install], [0],
-        [Whether or not to optimize for fast installation])dnl
- ])# _LT_ENABLE_FAST_INSTALL
- 
- LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
- LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
- 
- # Old names:
- AU_DEFUN([AC_ENABLE_FAST_INSTALL],
- [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
- AC_DIAGNOSE([obsolete],
- [$0: Remove this warning and the call to _LT_SET_OPTION when you put
- the `fast-install' option into LT_INIT's first parameter.])
- ])
- 
- AU_DEFUN([AC_DISABLE_FAST_INSTALL],
- [_LT_SET_OPTION([LT_INIT], [disable-fast-install])
- AC_DIAGNOSE([obsolete],
- [$0: Remove this warning and the call to _LT_SET_OPTION when you put
- the `disable-fast-install' option into LT_INIT's first parameter.])
- ])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
- dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
- 
- 
- # _LT_WITH_PIC([MODE])
- # --------------------
- # implement the --with-pic flag, and support the `pic-only' and `no-pic'
- # LT_INIT options.
- # MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
- m4_define([_LT_WITH_PIC],
- [AC_ARG_WITH([pic],
-     [AS_HELP_STRING([--with-pic],
-       [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-     [pic_mode="$withval"],
-     [pic_mode=default])
- 
- test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
- 
- _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
- ])# _LT_WITH_PIC
- 
- LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
- LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
- 
- # Old name:
- AU_DEFUN([AC_LIBTOOL_PICMODE],
- [_LT_SET_OPTION([LT_INIT], [pic-only])
- AC_DIAGNOSE([obsolete],
- [$0: Remove this warning and the call to _LT_SET_OPTION when you
- put the `pic-only' option into LT_INIT's first parameter.])
- ])
- 
- dnl aclocal-1.4 backwards compatibility:
- dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
- 
- 
- m4_define([_LTDL_MODE], [])
- LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
-                [m4_define([_LTDL_MODE], [nonrecursive])])
- LT_OPTION_DEFINE([LTDL_INIT], [recursive],
-                [m4_define([_LTDL_MODE], [recursive])])
- LT_OPTION_DEFINE([LTDL_INIT], [subproject],
-                [m4_define([_LTDL_MODE], [subproject])])
- 
- m4_define([_LTDL_TYPE], [])
- LT_OPTION_DEFINE([LTDL_INIT], [installable],
-                [m4_define([_LTDL_TYPE], [installable])])
- LT_OPTION_DEFINE([LTDL_INIT], [convenience],
-                [m4_define([_LTDL_TYPE], [convenience])])
- 
- # ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
- #
- # Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
- # Written by Gary V. Vaughan, 2004
- #
- # This file is free software; the Free Software Foundation gives
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
- 
- # serial 6 ltsugar.m4
- 
- # This is to help aclocal find these macros, as it can't see m4_define.
- AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
- 
- 
- # lt_join(SEP, ARG1, [ARG2...])
- # -----------------------------
- # Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
- # associated separator.
- # Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
- # versions in m4sugar had bugs.
- m4_define([lt_join],
- [m4_if([$#], [1], [],
-        [$#], [2], [[$2]],
-        [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
- m4_define([_lt_join],
- [m4_if([$#$2], [2], [],
-        [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
- 
- 
- # lt_car(LIST)
- # lt_cdr(LIST)
- # ------------
- # Manipulate m4 lists.
- # These macros are necessary as long as will still need to support
- # Autoconf-2.59 which quotes differently.
- m4_define([lt_car], [[$1]])
- m4_define([lt_cdr],
- [m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
-        [$#], 1, [],
-        [m4_dquote(m4_shift($@))])])
- m4_define([lt_unquote], $1)
- 
- 
- # lt_append(MACRO-NAME, STRING, [SEPARATOR])
- # ------------------------------------------
- # Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
- # Note that neither SEPARATOR nor STRING are expanded; they are appended
- # to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
- # No SEPARATOR is output if MACRO-NAME was previously undefined (different
- # than defined and empty).
- #
- # This macro is needed until we can rely on Autoconf 2.62, since earlier
- # versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
- m4_define([lt_append],
- [m4_define([$1],
-          m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
- 
- 
- 
- # lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
- # ----------------------------------------------------------
- # Produce a SEP delimited list of all paired combinations of elements of
- # PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
- # has the form PREFIXmINFIXSUFFIXn.
- # Needed until we can rely on m4_combine added in Autoconf 2.62.
- m4_define([lt_combine],
- [m4_if(m4_eval([$# > 3]), [1],
-        [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
- [[m4_foreach([_Lt_prefix], [$2],
-            [m4_foreach([_Lt_suffix],
-               ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
-       [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
- 
- 
- # lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
- # -----------------------------------------------------------------------
- # Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
- # by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
- m4_define([lt_if_append_uniq],
- [m4_ifdef([$1],
-         [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
-                [lt_append([$1], [$2], [$3])$4],
-                [$5])],
-         [lt_append([$1], [$2], [$3])$4])])
- 
- 
- # lt_dict_add(DICT, KEY, VALUE)
- # -----------------------------
- m4_define([lt_dict_add],
- [m4_define([$1($2)], [$3])])
- 
- 
- # lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
- # --------------------------------------------
- m4_define([lt_dict_add_subkey],
- [m4_define([$1($2:$3)], [$4])])
- 
- 
- # lt_dict_fetch(DICT, KEY, [SUBKEY])
- # ----------------------------------
- m4_define([lt_dict_fetch],
- [m4_ifval([$3],
-       m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
-     m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
- 
- 
- # lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
- # -----------------------------------------------------------------
- m4_define([lt_if_dict_fetch],
- [m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
-       [$5],
-     [$6])])
- 
- 
- # lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
- # --------------------------------------------------------------
- m4_define([lt_dict_filter],
- [m4_if([$5], [], [],
-   [lt_join(m4_quote(m4_default([$4], [[, ]])),
-            lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
-                     [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
- ])
- 
- # ltversion.m4 -- version numbers                     -*- Autoconf -*-
- #
- #   Copyright (C) 2004 Free Software Foundation, Inc.
- #   Written by Scott James Remnant, 2004
- #
- # This file is free software; the Free Software Foundation gives
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
- 
- # Generated from ltversion.in.
- 
- # serial 3017 ltversion.m4
- # This file is part of GNU Libtool
- 
- m4_define([LT_PACKAGE_VERSION], [2.2.6b])
- m4_define([LT_PACKAGE_REVISION], [1.3017])
- 
- AC_DEFUN([LTVERSION_VERSION],
- [macro_version='2.2.6b'
- macro_revision='1.3017'
- _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
- _LT_DECL(, macro_revision, 0)
- ])
- 
- # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
- #
- #   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
- #   Written by Scott James Remnant, 2004.
- #
- # This file is free software; the Free Software Foundation gives
- # unlimited permission to copy and/or distribute it, with or without
- # modifications, as long as this notice is preserved.
- 
- # serial 4 lt~obsolete.m4
- 
- # These exist entirely to fool aclocal when bootstrapping libtool.
- #
- # In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
- # which have later been changed to m4_define as they aren't part of the
- # exported API, or moved to Autoconf or Automake where they belong.
- #
- # The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
- # in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
- # using a macro with the same name in our local m4/libtool.m4 it'll
- # pull the old libtool.m4 in (it doesn't see our shiny new m4_define
- # and doesn't know about Autoconf macros at all.)
- #
- # So we provide this file, which has a silly filename so it's always
- # included after everything else.  This provides aclocal with the
- # AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
- # because those macros already exist, or will be overwritten later.
- # We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
- #
- # Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
- # Yes, that means every name once taken will need to remain here until
- # we give up compatibility with versions before 1.7, at which point
- # we need to keep only those names which we still refer to.
- 
- # This is to help aclocal find these macros, as it can't see m4_define.
- AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
- 
- m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
- m4_ifndef([AC_PROG_EGREP],            [AC_DEFUN([AC_PROG_EGREP])])
- m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],       [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
- m4_ifndef([_LT_AC_SHELL_INIT],                [AC_DEFUN([_LT_AC_SHELL_INIT])])
- m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],   [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
- m4_ifndef([_LT_PROG_LTMAIN],          [AC_DEFUN([_LT_PROG_LTMAIN])])
- m4_ifndef([_LT_AC_TAGVAR],            [AC_DEFUN([_LT_AC_TAGVAR])])
- m4_ifndef([AC_LTDL_ENABLE_INSTALL],   [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
- m4_ifndef([AC_LTDL_PREOPEN],          [AC_DEFUN([AC_LTDL_PREOPEN])])
- m4_ifndef([_LT_AC_SYS_COMPILER],      [AC_DEFUN([_LT_AC_SYS_COMPILER])])
- m4_ifndef([_LT_AC_LOCK],              [AC_DEFUN([_LT_AC_LOCK])])
- m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],       [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
- m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],   [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
- m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],   [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
- m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
- m4_ifndef([AC_LIBTOOL_OBJDIR],                [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
- m4_ifndef([AC_LTDL_OBJDIR],           [AC_DEFUN([AC_LTDL_OBJDIR])])
- m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
- m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
- m4_ifndef([AC_PATH_MAGIC],            [AC_DEFUN([AC_PATH_MAGIC])])
- m4_ifndef([AC_PROG_LD_GNU],           [AC_DEFUN([AC_PROG_LD_GNU])])
- m4_ifndef([AC_PROG_LD_RELOAD_FLAG],   [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
- m4_ifndef([AC_DEPLIBS_CHECK_METHOD],  [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
- m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
- m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
- m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
- m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],        [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
- m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],        [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
- m4_ifndef([LT_AC_PROG_EGREP],         [AC_DEFUN([LT_AC_PROG_EGREP])])
- m4_ifndef([LT_AC_PROG_SED],           [AC_DEFUN([LT_AC_PROG_SED])])
- m4_ifndef([_LT_CC_BASENAME],          [AC_DEFUN([_LT_CC_BASENAME])])
- m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
- m4_ifndef([_LT_LINKER_BOILERPLATE],   [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
- m4_ifndef([_AC_PROG_LIBTOOL],         [AC_DEFUN([_AC_PROG_LIBTOOL])])
- m4_ifndef([AC_LIBTOOL_SETUP],         [AC_DEFUN([AC_LIBTOOL_SETUP])])
- m4_ifndef([_LT_AC_CHECK_DLFCN],               [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
- m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],    [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
- m4_ifndef([_LT_AC_TAGCONFIG],         [AC_DEFUN([_LT_AC_TAGCONFIG])])
- m4_ifndef([AC_DISABLE_FAST_INSTALL],  [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
- m4_ifndef([_LT_AC_LANG_CXX],          [AC_DEFUN([_LT_AC_LANG_CXX])])
- m4_ifndef([_LT_AC_LANG_F77],          [AC_DEFUN([_LT_AC_LANG_F77])])
- m4_ifndef([_LT_AC_LANG_GCJ],          [AC_DEFUN([_LT_AC_LANG_GCJ])])
- m4_ifndef([AC_LIBTOOL_RC],            [AC_DEFUN([AC_LIBTOOL_RC])])
- m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
- m4_ifndef([_LT_AC_LANG_C_CONFIG],     [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
- m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
- m4_ifndef([_LT_AC_LANG_CXX_CONFIG],   [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
- m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
- m4_ifndef([_LT_AC_LANG_F77_CONFIG],   [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
- m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
- m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],   [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
- m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],        [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
- m4_ifndef([_LT_AC_LANG_RC_CONFIG],    [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
- m4_ifndef([AC_LIBTOOL_CONFIG],                [AC_DEFUN([AC_LIBTOOL_CONFIG])])
- m4_ifndef([_LT_AC_FILE_LTDLL_C],      [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
- 
 +# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
 +
 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 +# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# This program is distributed in the hope that it will be useful,
 +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 +# PARTICULAR PURPOSE.
 +
 +m4_ifndef([AC_AUTOCONF_VERSION],
 +  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
 +[m4_warning([this file was generated for autoconf 2.67.
 +You have another version of autoconf.  It may work, but is not guaranteed to.
 +If you have problems, you may need to regenerate the build system entirely.
 +To do so, use the procedure documented by the package, typically `autoreconf'.])])
 +
 +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# AM_AUTOMAKE_VERSION(VERSION)
 +# ----------------------------
 +# Automake X.Y traces this macro to ensure aclocal.m4 has been
 +# generated from the m4 files accompanying Automake X.Y.
 +# (This private macro should not be called outside this file.)
 +AC_DEFUN([AM_AUTOMAKE_VERSION],
 +[am__api_version='1.11'
 +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 +dnl require some minimum version.  Point them to the right macro.
 +m4_if([$1], [1.11.1], [],
 +      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 +])
 +
 +# _AM_AUTOCONF_VERSION(VERSION)
 +# -----------------------------
 +# aclocal traces this macro to find the Autoconf version.
 +# This is a private macro too.  Using m4_define simplifies
 +# the logic in aclocal, which can simply ignore this definition.
 +m4_define([_AM_AUTOCONF_VERSION], [])
 +
 +# AM_SET_CURRENT_AUTOMAKE_VERSION
 +# -------------------------------
 +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
 +[AM_AUTOMAKE_VERSION([1.11.1])dnl
 +m4_ifndef([AC_AUTOCONF_VERSION],
 +  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 +
 +# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 +
 +# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 +# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
 +# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
 +#
 +# Of course, Automake must honor this variable whenever it calls a
 +# tool from the auxiliary directory.  The problem is that $srcdir (and
 +# therefore $ac_aux_dir as well) can be either absolute or relative,
 +# depending on how configure is run.  This is pretty annoying, since
 +# it makes $ac_aux_dir quite unusable in subdirectories: in the top
 +# source directory, any form will work fine, but in subdirectories a
 +# relative path needs to be adjusted first.
 +#
 +# $ac_aux_dir/missing
 +#    fails when called from a subdirectory if $ac_aux_dir is relative
 +# $top_srcdir/$ac_aux_dir/missing
 +#    fails if $ac_aux_dir is absolute,
 +#    fails when called from a subdirectory in a VPATH build with
 +#          a relative $ac_aux_dir
 +#
 +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
 +# are both prefixed by $srcdir.  In an in-source build this is usually
 +# harmless because $srcdir is `.', but things will broke when you
 +# start a VPATH build or use an absolute $srcdir.
 +#
 +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
 +# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
 +#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
 +# and then we would define $MISSING as
 +#   MISSING="\${SHELL} $am_aux_dir/missing"
 +# This will work as long as MISSING is not called from configure, because
 +# unfortunately $(top_srcdir) has no meaning in configure.
 +# However there are other variables, like CC, which are often used in
 +# configure, and could therefore not use this "fixed" $ac_aux_dir.
 +#
 +# Another solution, used here, is to always expand $ac_aux_dir to an
 +# absolute PATH.  The drawback is that using absolute paths prevent a
 +# configured tree to be moved without reconfiguration.
 +
 +AC_DEFUN([AM_AUX_DIR_EXPAND],
 +[dnl Rely on autoconf to set up CDPATH properly.
 +AC_PREREQ([2.50])dnl
 +# expand $ac_aux_dir to an absolute path
 +am_aux_dir=`cd $ac_aux_dir && pwd`
 +])
 +
 +# AM_CONDITIONAL                                            -*- Autoconf -*-
 +
 +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 +# Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 9
 +
 +# AM_CONDITIONAL(NAME, SHELL-CONDITION)
 +# -------------------------------------
 +# Define a conditional.
 +AC_DEFUN([AM_CONDITIONAL],
 +[AC_PREREQ(2.52)dnl
 + ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 +      [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
 +AC_SUBST([$1_TRUE])dnl
 +AC_SUBST([$1_FALSE])dnl
 +_AM_SUBST_NOTMAKE([$1_TRUE])dnl
 +_AM_SUBST_NOTMAKE([$1_FALSE])dnl
 +m4_define([_AM_COND_VALUE_$1], [$2])dnl
 +if $2; then
 +  $1_TRUE=
 +  $1_FALSE='#'
 +else
 +  $1_TRUE='#'
 +  $1_FALSE=
 +fi
 +AC_CONFIG_COMMANDS_PRE(
 +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
 +  AC_MSG_ERROR([[conditional "$1" was never defined.
 +Usually this means the macro was only invoked conditionally.]])
 +fi])])
 +
 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
 +# Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 10
 +
 +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 +# written in clear, in which case automake, when reading aclocal.m4,
 +# will think it sees a *use*, and therefore will trigger all it's
 +# C support machinery.  Also note that it means that autoscan, seeing
 +# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
 +
 +
 +# _AM_DEPENDENCIES(NAME)
 +# ----------------------
 +# See how the compiler implements dependency checking.
 +# NAME is "CC", "CXX", "GCJ", or "OBJC".
 +# We try a few techniques and use that to set a single cache variable.
 +#
 +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
 +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
 +# dependency, and given that the user is not expected to run this macro,
 +# just rely on AC_PROG_CC.
 +AC_DEFUN([_AM_DEPENDENCIES],
 +[AC_REQUIRE([AM_SET_DEPDIR])dnl
 +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
 +AC_REQUIRE([AM_MAKE_INCLUDE])dnl
 +AC_REQUIRE([AM_DEP_TRACK])dnl
 +
 +ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
 +       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
 +       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
 +       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
 +       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
 +                   [depcc="$$1"   am_compiler_list=])
 +
 +AC_CACHE_CHECK([dependency style of $depcc],
 +               [am_cv_$1_dependencies_compiler_type],
 +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
 +  # We make a subdir and do the tests there.  Otherwise we can end up
 +  # making bogus files that we don't know about and never remove.  For
 +  # instance it was reported that on HP-UX the gcc test will end up
 +  # making a dummy file named `D' -- because `-MD' means `put the output
 +  # in D'.
 +  mkdir conftest.dir
 +  # Copy depcomp to subdir because otherwise we won't find it if we're
 +  # using a relative directory.
 +  cp "$am_depcomp" conftest.dir
 +  cd conftest.dir
 +  # We will build objects and dependencies in a subdirectory because
 +  # it helps to detect inapplicable dependency modes.  For instance
 +  # both Tru64's cc and ICC support -MD to output dependencies as a
 +  # side effect of compilation, but ICC will put the dependencies in
 +  # the current directory while Tru64 will put them in the object
 +  # directory.
 +  mkdir sub
 +
 +  am_cv_$1_dependencies_compiler_type=none
 +  if test "$am_compiler_list" = ""; then
 +     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
 +  fi
 +  am__universal=false
 +  m4_case([$1], [CC],
 +    [case " $depcc " in #(
 +     *\ -arch\ *\ -arch\ *) am__universal=true ;;
 +     esac],
 +    [CXX],
 +    [case " $depcc " in #(
 +     *\ -arch\ *\ -arch\ *) am__universal=true ;;
 +     esac])
 +
 +  for depmode in $am_compiler_list; do
 +    # Setup a source with many dependencies, because some compilers
 +    # like to wrap large dependency lists on column 80 (with \), and
 +    # we should not choose a depcomp mode which is confused by this.
 +    #
 +    # We need to recreate these files for each test, as the compiler may
 +    # overwrite some of them when testing with obscure command lines.
 +    # This happens at least with the AIX C compiler.
 +    : > sub/conftest.c
 +    for i in 1 2 3 4 5 6; do
 +      echo '#include "conftst'$i'.h"' >> sub/conftest.c
 +      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
 +      # Solaris 8's {/usr,}/bin/sh.
 +      touch sub/conftst$i.h
 +    done
 +    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 +
 +    # We check with `-c' and `-o' for the sake of the "dashmstdout"
 +    # mode.  It turns out that the SunPro C++ compiler does not properly
 +    # handle `-M -o', and we need to detect this.  Also, some Intel
 +    # versions had trouble with output in subdirs
 +    am__obj=sub/conftest.${OBJEXT-o}
 +    am__minus_obj="-o $am__obj"
 +    case $depmode in
 +    gcc)
 +      # This depmode causes a compiler race in universal mode.
 +      test "$am__universal" = false || continue
 +      ;;
 +    nosideeffect)
 +      # after this tag, mechanisms are not by side-effect, so they'll
 +      # only be used when explicitly requested
 +      if test "x$enable_dependency_tracking" = xyes; then
 +      continue
 +      else
 +      break
 +      fi
 +      ;;
 +    msvisualcpp | msvcmsys)
 +      # This compiler won't grok `-c -o', but also, the minuso test has
 +      # not run yet.  These depmodes are late enough in the game, and
 +      # so weak that their functioning should not be impacted.
 +      am__obj=conftest.${OBJEXT-o}
 +      am__minus_obj=
 +      ;;
 +    none) break ;;
 +    esac
 +    if depmode=$depmode \
 +       source=sub/conftest.c object=$am__obj \
 +       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
 +       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
 +         >/dev/null 2>conftest.err &&
 +       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
 +       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
 +      # icc doesn't choke on unknown options, it will just issue warnings
 +      # or remarks (even with -Werror).  So we grep stderr for any message
 +      # that says an option was ignored or not supported.
 +      # When given -MP, icc 7.0 and 7.1 complain thusly:
 +      #   icc: Command line warning: ignoring option '-M'; no argument required
 +      # The diagnosis changed in icc 8.0:
 +      #   icc: Command line remark: option '-MP' not supported
 +      if (grep 'ignoring option' conftest.err ||
 +          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
 +        am_cv_$1_dependencies_compiler_type=$depmode
 +        break
 +      fi
 +    fi
 +  done
 +
 +  cd ..
 +  rm -rf conftest.dir
 +else
 +  am_cv_$1_dependencies_compiler_type=none
 +fi
 +])
 +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
 +AM_CONDITIONAL([am__fastdep$1], [
 +  test "x$enable_dependency_tracking" != xno \
 +  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
 +])
 +
 +
 +# AM_SET_DEPDIR
 +# -------------
 +# Choose a directory name for dependency files.
 +# This macro is AC_REQUIREd in _AM_DEPENDENCIES
 +AC_DEFUN([AM_SET_DEPDIR],
 +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
 +])
 +
 +
 +# AM_DEP_TRACK
 +# ------------
 +AC_DEFUN([AM_DEP_TRACK],
 +[AC_ARG_ENABLE(dependency-tracking,
 +[  --disable-dependency-tracking  speeds up one-time build
 +  --enable-dependency-tracking   do not reject slow dependency extractors])
 +if test "x$enable_dependency_tracking" != xno; then
 +  am_depcomp="$ac_aux_dir/depcomp"
 +  AMDEPBACKSLASH='\'
 +fi
 +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
 +AC_SUBST([AMDEPBACKSLASH])dnl
 +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 +])
 +
 +# Generate code to set up dependency tracking.              -*- Autoconf -*-
 +
 +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 +# Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +#serial 5
 +
 +# _AM_OUTPUT_DEPENDENCY_COMMANDS
 +# ------------------------------
 +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
 +[{
 +  # Autoconf 2.62 quotes --file arguments for eval, but not when files
 +  # are listed without --file.  Let's play safe and only enable the eval
 +  # if we detect the quoting.
 +  case $CONFIG_FILES in
 +  *\'*) eval set x "$CONFIG_FILES" ;;
 +  *)   set x $CONFIG_FILES ;;
 +  esac
 +  shift
 +  for mf
 +  do
 +    # Strip MF so we end up with the name of the file.
 +    mf=`echo "$mf" | sed -e 's/:.*$//'`
 +    # Check whether this is an Automake generated Makefile or not.
 +    # We used to match only the files named `Makefile.in', but
 +    # some people rename them; so instead we look at the file content.
 +    # Grep'ing the first line is not enough: some people post-process
 +    # each Makefile.in and add a new line on top of each file to say so.
 +    # Grep'ing the whole file is not good either: AIX grep has a line
 +    # limit of 2048, but all sed's we know have understand at least 4000.
 +    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
 +      dirpart=`AS_DIRNAME("$mf")`
 +    else
 +      continue
 +    fi
 +    # Extract the definition of DEPDIR, am__include, and am__quote
 +    # from the Makefile without running `make'.
 +    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
 +    test -z "$DEPDIR" && continue
 +    am__include=`sed -n 's/^am__include = //p' < "$mf"`
 +    test -z "am__include" && continue
 +    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
 +    # When using ansi2knr, U may be empty or an underscore; expand it
 +    U=`sed -n 's/^U = //p' < "$mf"`
 +    # Find all dependency output files, they are included files with
 +    # $(DEPDIR) in their names.  We invoke sed twice because it is the
 +    # simplest approach to changing $(DEPDIR) to its actual value in the
 +    # expansion.
 +    for file in `sed -n "
 +      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
 +       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
 +      # Make sure the directory exists.
 +      test -f "$dirpart/$file" && continue
 +      fdir=`AS_DIRNAME(["$file"])`
 +      AS_MKDIR_P([$dirpart/$fdir])
 +      # echo "creating $dirpart/$file"
 +      echo '# dummy' > "$dirpart/$file"
 +    done
 +  done
 +}
 +])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 +
 +
 +# AM_OUTPUT_DEPENDENCY_COMMANDS
 +# -----------------------------
 +# This macro should only be invoked once -- use via AC_REQUIRE.
 +#
 +# This code is only required when automatic dependency tracking
 +# is enabled.  FIXME.  This creates each `.P' file that we will
 +# need in order to bootstrap the dependency handling code.
 +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 +[AC_CONFIG_COMMANDS([depfiles],
 +     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
 +     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
 +])
 +
 +# Do all the work for Automake.                             -*- Autoconf -*-
 +
 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 16
 +
 +# This macro actually does too much.  Some checks are only needed if
 +# your package does certain things.  But this isn't really a big deal.
 +
 +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 +# AM_INIT_AUTOMAKE([OPTIONS])
 +# -----------------------------------------------
 +# The call with PACKAGE and VERSION arguments is the old style
 +# call (pre autoconf-2.50), which is being phased out.  PACKAGE
 +# and VERSION should now be passed to AC_INIT and removed from
 +# the call to AM_INIT_AUTOMAKE.
 +# We support both call styles for the transition.  After
 +# the next Automake release, Autoconf can make the AC_INIT
 +# arguments mandatory, and then we can depend on a new Autoconf
 +# release and drop the old call support.
 +AC_DEFUN([AM_INIT_AUTOMAKE],
 +[AC_PREREQ([2.62])dnl
 +dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 +dnl the ones we care about.
 +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 +AC_REQUIRE([AC_PROG_INSTALL])dnl
 +if test "`cd $srcdir && pwd`" != "`pwd`"; then
 +  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
 +  # is not polluted with repeated "-I."
 +  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
 +  # test to see if srcdir already configured
 +  if test -f $srcdir/config.status; then
 +    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
 +  fi
 +fi
 +
 +# test whether we have cygpath
 +if test -z "$CYGPATH_W"; then
 +  if (cygpath --version) >/dev/null 2>/dev/null; then
 +    CYGPATH_W='cygpath -w'
 +  else
 +    CYGPATH_W=echo
 +  fi
 +fi
 +AC_SUBST([CYGPATH_W])
 +
 +# Define the identity of the package.
 +dnl Distinguish between old-style and new-style calls.
 +m4_ifval([$2],
 +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 + AC_SUBST([PACKAGE], [$1])dnl
 + AC_SUBST([VERSION], [$2])],
 +[_AM_SET_OPTIONS([$1])dnl
 +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
 +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
 +  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
 + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 +
 +_AM_IF_OPTION([no-define],,
 +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
 + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
 +
 +# Some tools Automake needs.
 +AC_REQUIRE([AM_SANITY_CHECK])dnl
 +AC_REQUIRE([AC_ARG_PROGRAM])dnl
 +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
 +AM_MISSING_PROG(AUTOCONF, autoconf)
 +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 +AM_MISSING_PROG(AUTOHEADER, autoheader)
 +AM_MISSING_PROG(MAKEINFO, makeinfo)
 +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
 +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 +AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 +# We need awk for the "check" target.  The system "awk" is bad on
 +# some platforms.
 +AC_REQUIRE([AC_PROG_AWK])dnl
 +AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 +AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
 +            [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
 +                           [_AM_PROG_TAR([v7])])])
 +_AM_IF_OPTION([no-dependencies],,
 +[AC_PROVIDE_IFELSE([AC_PROG_CC],
 +                [_AM_DEPENDENCIES(CC)],
 +                [define([AC_PROG_CC],
 +                        defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 +AC_PROVIDE_IFELSE([AC_PROG_CXX],
 +                [_AM_DEPENDENCIES(CXX)],
 +                [define([AC_PROG_CXX],
 +                        defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 +AC_PROVIDE_IFELSE([AC_PROG_OBJC],
 +                [_AM_DEPENDENCIES(OBJC)],
 +                [define([AC_PROG_OBJC],
 +                        defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 +])
 +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
 +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
 +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
 +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
 +AC_CONFIG_COMMANDS_PRE(dnl
 +[m4_provide_if([_AM_COMPILER_EXEEXT],
 +  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 +])
 +
 +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
 +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
 +dnl mangled by Autoconf and run in a shell conditional statement.
 +m4_define([_AC_COMPILER_EXEEXT],
 +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
 +
 +
 +# When config.status generates a header, we must update the stamp-h file.
 +# This file resides in the same directory as the config header
 +# that is generated.  The stamp files are numbered to have different names.
 +
 +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
 +# loop where config.status creates the headers, so we can generate
 +# our stamp files there.
 +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 +[# Compute $1's index in $config_headers.
 +_am_arg=$1
 +_am_stamp_count=1
 +for _am_header in $config_headers :; do
 +  case $_am_header in
 +    $_am_arg | $_am_arg:* )
 +      break ;;
 +    * )
 +      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
 +  esac
 +done
 +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 +
 +# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# AM_PROG_INSTALL_SH
 +# ------------------
 +# Define $install_sh.
 +AC_DEFUN([AM_PROG_INSTALL_SH],
 +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 +if test x"${install_sh}" != xset; then
 +  case $am_aux_dir in
 +  *\ * | *\   *)
 +    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
 +  *)
 +    install_sh="\${SHELL} $am_aux_dir/install-sh"
 +  esac
 +fi
 +AC_SUBST(install_sh)])
 +
 +# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 2
 +
 +# Check whether the underlying file-system supports filenames
 +# with a leading dot.  For instance MS-DOS doesn't.
 +AC_DEFUN([AM_SET_LEADING_DOT],
 +[rm -rf .tst 2>/dev/null
 +mkdir .tst 2>/dev/null
 +if test -d .tst; then
 +  am__leading_dot=.
 +else
 +  am__leading_dot=_
 +fi
 +rmdir .tst 2>/dev/null
 +AC_SUBST([am__leading_dot])])
 +
++# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
++# From Jim Meyering
++
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 5
++
++# AM_MAINTAINER_MODE([DEFAULT-MODE])
++# ----------------------------------
++# Control maintainer-specific portions of Makefiles.
++# Default is to disable them, unless `enable' is passed literally.
++# For symmetry, `disable' may be passed as well.  Anyway, the user
++# can override the default with the --enable/--disable switch.
++AC_DEFUN([AM_MAINTAINER_MODE],
++[m4_case(m4_default([$1], [disable]),
++       [enable], [m4_define([am_maintainer_other], [disable])],
++       [disable], [m4_define([am_maintainer_other], [enable])],
++       [m4_define([am_maintainer_other], [enable])
++        m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
++AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
++  dnl maintainer-mode's default is 'disable' unless 'enable' is passed
++  AC_ARG_ENABLE([maintainer-mode],
++[  --][am_maintainer_other][-maintainer-mode  am_maintainer_other make rules and dependencies not useful
++                        (and sometimes confusing) to the casual installer],
++      [USE_MAINTAINER_MODE=$enableval],
++      [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
++  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++  AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
++  MAINT=$MAINTAINER_MODE_TRUE
++  AC_SUBST([MAINT])dnl
++]
++)
++
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
++
 +# Check to see how 'make' treats includes.                -*- Autoconf -*-
 +
 +# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 4
 +
 +# AM_MAKE_INCLUDE()
 +# -----------------
 +# Check to see how make treats includes.
 +AC_DEFUN([AM_MAKE_INCLUDE],
 +[am_make=${MAKE-make}
 +cat > confinc << 'END'
 +am__doit:
 +      @echo this is the am__doit target
 +.PHONY: am__doit
 +END
 +# If we don't find an include directive, just comment out the code.
 +AC_MSG_CHECKING([for style of include used by $am_make])
 +am__include="#"
 +am__quote=
 +_am_result=none
 +# First try GNU make style include.
 +echo "include confinc" > confmf
 +# Ignore all kinds of additional output from `make'.
 +case `$am_make -s -f confmf 2> /dev/null` in #(
 +*the\ am__doit\ target*)
 +  am__include=include
 +  am__quote=
 +  _am_result=GNU
 +  ;;
 +esac
 +# Now try BSD make style include.
 +if test "$am__include" = "#"; then
 +   echo '.include "confinc"' > confmf
 +   case `$am_make -s -f confmf 2> /dev/null` in #(
 +   *the\ am__doit\ target*)
 +     am__include=.include
 +     am__quote="\""
 +     _am_result=BSD
 +     ;;
 +   esac
 +fi
 +AC_SUBST([am__include])
 +AC_SUBST([am__quote])
 +AC_MSG_RESULT([$_am_result])
 +rm -f confinc confmf
 +])
 +
 +# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 +
 +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 +# Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 6
 +
 +# AM_MISSING_PROG(NAME, PROGRAM)
 +# ------------------------------
 +AC_DEFUN([AM_MISSING_PROG],
 +[AC_REQUIRE([AM_MISSING_HAS_RUN])
 +$1=${$1-"${am_missing_run}$2"}
 +AC_SUBST($1)])
 +
 +
 +# AM_MISSING_HAS_RUN
 +# ------------------
 +# Define MISSING if not defined so far and test if it supports --run.
 +# If it does, set am_missing_run to use it, otherwise, to nothing.
 +AC_DEFUN([AM_MISSING_HAS_RUN],
 +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 +AC_REQUIRE_AUX_FILE([missing])dnl
 +if test x"${MISSING+set}" != xset; then
 +  case $am_aux_dir in
 +  *\ * | *\   *)
 +    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
 +  *)
 +    MISSING="\${SHELL} $am_aux_dir/missing" ;;
 +  esac
 +fi
 +# Use eval to expand $SHELL
 +if eval "$MISSING --run true"; then
 +  am_missing_run="$MISSING --run "
 +else
 +  am_missing_run=
 +  AC_MSG_WARN([`missing' script is too old or missing])
 +fi
 +])
 +
 +# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# AM_PROG_MKDIR_P
 +# ---------------
 +# Check for `mkdir -p'.
 +AC_DEFUN([AM_PROG_MKDIR_P],
 +[AC_PREREQ([2.60])dnl
 +AC_REQUIRE([AC_PROG_MKDIR_P])dnl
 +dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
 +dnl while keeping a definition of mkdir_p for backward compatibility.
 +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
 +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
 +dnl Makefile.ins that do not define MKDIR_P, so we do our own
 +dnl adjustment using top_builddir (which is defined more often than
 +dnl MKDIR_P).
 +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
 +case $mkdir_p in
 +  [[\\/$]]* | ?:[[\\/]]*) ;;
 +  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
 +esac
 +])
 +
 +# Helper functions for option handling.                     -*- Autoconf -*-
 +
 +# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 4
 +
 +# _AM_MANGLE_OPTION(NAME)
 +# -----------------------
 +AC_DEFUN([_AM_MANGLE_OPTION],
 +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
 +
 +# _AM_SET_OPTION(NAME)
 +# ------------------------------
 +# Set option NAME.  Presently that only means defining a flag for this option.
 +AC_DEFUN([_AM_SET_OPTION],
 +[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
 +
 +# _AM_SET_OPTIONS(OPTIONS)
 +# ----------------------------------
 +# OPTIONS is a space-separated list of Automake options.
 +AC_DEFUN([_AM_SET_OPTIONS],
 +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 +
 +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 +# -------------------------------------------
 +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
 +AC_DEFUN([_AM_IF_OPTION],
 +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 +
 +# Check to make sure that the build environment is sane.    -*- Autoconf -*-
 +
 +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 +# Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 5
 +
 +# AM_SANITY_CHECK
 +# ---------------
 +AC_DEFUN([AM_SANITY_CHECK],
 +[AC_MSG_CHECKING([whether build environment is sane])
 +# Just in case
 +sleep 1
 +echo timestamp > conftest.file
 +# Reject unsafe characters in $srcdir or the absolute working directory
 +# name.  Accept space and tab only in the latter.
 +am_lf='
 +'
 +case `pwd` in
 +  *[[\\\"\#\$\&\'\`$am_lf]]*)
 +    AC_MSG_ERROR([unsafe absolute working directory name]);;
 +esac
 +case $srcdir in
 +  *[[\\\"\#\$\&\'\`$am_lf\ \  ]]*)
 +    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
 +esac
 +
 +# Do `set' in a subshell so we don't clobber the current shell's
 +# arguments.  Must try -L first in case configure is actually a
 +# symlink; some systems play weird games with the mod time of symlinks
 +# (eg FreeBSD returns the mod time of the symlink's containing
 +# directory).
 +if (
 +   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
 +   if test "$[*]" = "X"; then
 +      # -L didn't work.
 +      set X `ls -t "$srcdir/configure" conftest.file`
 +   fi
 +   rm -f conftest.file
 +   if test "$[*]" != "X $srcdir/configure conftest.file" \
 +      && test "$[*]" != "X conftest.file $srcdir/configure"; then
 +
 +      # If neither matched, then we have a broken ls.  This can happen
 +      # if, for instance, CONFIG_SHELL is bash and it inherits a
 +      # broken ls alias from the environment.  This has actually
 +      # happened.  Such a system could not be considered "sane".
 +      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
 +alias in your environment])
 +   fi
 +
 +   test "$[2]" = conftest.file
 +   )
 +then
 +   # Ok.
 +   :
 +else
 +   AC_MSG_ERROR([newly created file is older than distributed files!
 +Check your system clock])
 +fi
 +AC_MSG_RESULT(yes)])
 +
 +# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# AM_PROG_INSTALL_STRIP
 +# ---------------------
 +# One issue with vendor `install' (even GNU) is that you can't
 +# specify the program used to strip binaries.  This is especially
 +# annoying in cross-compiling environments, where the build's strip
 +# is unlikely to handle the host's binaries.
 +# Fortunately install-sh will honor a STRIPPROG variable, so we
 +# always use install-sh in `make install-strip', and initialize
 +# STRIPPROG with the value of the STRIP variable (set by the user).
 +AC_DEFUN([AM_PROG_INSTALL_STRIP],
 +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
 +# Installed binaries are usually stripped using `strip' when the user
 +# run `make install-strip'.  However `strip' might not be the right
 +# tool to use in cross-compilation environments, therefore Automake
 +# will honor the `STRIP' environment variable to overrule this program.
 +dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 +if test "$cross_compiling" != no; then
 +  AC_CHECK_TOOL([STRIP], [strip], :)
 +fi
 +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 +AC_SUBST([INSTALL_STRIP_PROGRAM])])
 +
 +# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 2
 +
 +# _AM_SUBST_NOTMAKE(VARIABLE)
 +# ---------------------------
 +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 +# This macro is traced by Automake.
 +AC_DEFUN([_AM_SUBST_NOTMAKE])
 +
 +# AM_SUBST_NOTMAKE(VARIABLE)
 +# ---------------------------
 +# Public sister of _AM_SUBST_NOTMAKE.
 +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 +
 +# Check how to create a tarball.                            -*- Autoconf -*-
 +
 +# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
 +#
 +# This file is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# serial 2
 +
 +# _AM_PROG_TAR(FORMAT)
 +# --------------------
 +# Check how to create a tarball in format FORMAT.
 +# FORMAT should be one of `v7', `ustar', or `pax'.
 +#
 +# Substitute a variable $(am__tar) that is a command
 +# writing to stdout a FORMAT-tarball containing the directory
 +# $tardir.
 +#     tardir=directory && $(am__tar) > result.tar
 +#
 +# Substitute a variable $(am__untar) that extract such
 +# a tarball read from stdin.
 +#     $(am__untar) < result.tar
 +AC_DEFUN([_AM_PROG_TAR],
 +[# Always define AMTAR for backward compatibility.
 +AM_MISSING_PROG([AMTAR], [tar])
 +m4_if([$1], [v7],
 +     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
 +     [m4_case([$1], [ustar],, [pax],,
 +              [m4_fatal([Unknown tar format])])
 +AC_MSG_CHECKING([how to create a $1 tar archive])
 +# Loop over all known methods to create a tar archive until one works.
 +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
 +_am_tools=${am_cv_prog_tar_$1-$_am_tools}
 +# Do not fold the above two line into one, because Tru64 sh and
 +# Solaris sh will not grok spaces in the rhs of `-'.
 +for _am_tool in $_am_tools
 +do
 +  case $_am_tool in
 +  gnutar)
 +    for _am_tar in tar gnutar gtar;
 +    do
 +      AM_RUN_LOG([$_am_tar --version]) && break
 +    done
 +    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
 +    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
 +    am__untar="$_am_tar -xf -"
 +    ;;
 +  plaintar)
 +    # Must skip GNU tar: if it does not support --format= it doesn't create
 +    # ustar tarball either.
 +    (tar --version) >/dev/null 2>&1 && continue
 +    am__tar='tar chf - "$$tardir"'
 +    am__tar_='tar chf - "$tardir"'
 +    am__untar='tar xf -'
 +    ;;
 +  pax)
 +    am__tar='pax -L -x $1 -w "$$tardir"'
 +    am__tar_='pax -L -x $1 -w "$tardir"'
 +    am__untar='pax -r'
 +    ;;
 +  cpio)
 +    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
 +    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
 +    am__untar='cpio -i -H $1 -d'
 +    ;;
 +  none)
 +    am__tar=false
 +    am__tar_=false
 +    am__untar=false
 +    ;;
 +  esac
 +
 +  # If the value was cached, stop now.  We just wanted to have am__tar
 +  # and am__untar set.
 +  test -n "${am_cv_prog_tar_$1}" && break
 +
 +  # tar/untar a dummy directory, and stop if the command works
 +  rm -rf conftest.dir
 +  mkdir conftest.dir
 +  echo GrepMe > conftest.dir/file
 +  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
 +  rm -rf conftest.dir
 +  if test -s conftest.tar; then
 +    AM_RUN_LOG([$am__untar <conftest.tar])
 +    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
 +  fi
 +done
 +rm -rf conftest.dir
 +
 +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
 +AC_MSG_RESULT([$am_cv_prog_tar_$1])])
 +AC_SUBST([am__tar])
 +AC_SUBST([am__untar])
 +]) # _AM_PROG_TAR
 +
++m4_include([m4/libtool.m4])
++m4_include([m4/ltoptions.m4])
++m4_include([m4/ltsugar.m4])
++m4_include([m4/ltversion.m4])
++m4_include([m4/lt~obsolete.m4])
++m4_include([m4/minuso.m4])
 +m4_include([acinclude.m4])

diff --cc build-aux/compile
index 5360806,0000000..c0096a7
mode 100755,000000..100755
--- 1/build-aux/compile
--- /dev/null
+++ b/build-aux/compile
@@@ -1,144 -1,0 +1,143 @@@
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 +#! /bin/sh
 +# Wrapper for compilers which do not understand `-c -o'.
 +
 +scriptversion=2009-10-06.20; # UTC
 +
 +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009  Free Software
 +# Foundation, Inc.
 +# Written by Tom Tromey <tromey@cygnus.com>.
 +#
 +# This program is free software; you can redistribute it and/or modify
 +# it under the terms of the GNU General Public License as published by
 +# the Free Software Foundation; either version 2, or (at your option)
 +# any later version.
 +#
 +# This program is distributed in the hope that it will be useful,
 +# but WITHOUT ANY WARRANTY; without even the implied warranty of
 +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 +# GNU General Public License for more details.
 +#
 +# You should have received a copy of the GNU General Public License
++# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 +
 +# As a special exception to the GNU General Public License, if you
 +# distribute this file as part of a program that contains a
 +# configuration script generated by Autoconf, you may include it under
 +# the same distribution terms that you use for the rest of that program.
 +
 +# This file is maintained in Automake, please report
 +# bugs to <bug-automake@gnu.org> or send patches to
 +# <automake-patches@gnu.org>.
 +
 +case $1 in
 +  '')
 +     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
 +     exit 1;
 +     ;;
 +  -h | --h*)
 +    cat <<\EOF
 +Usage: compile [--help] [--version] PROGRAM [ARGS]
 +
 +Wrapper for compilers which do not understand `-c -o'.
 +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
 +arguments, and rename the output as expected.
 +
 +If you are trying to build a whole package this is not the
 +right script to run: please start by reading the file `INSTALL'.
 +
 +Report bugs to <bug-automake@gnu.org>.
 +EOF
 +    exit $?
 +    ;;
 +  -v | --v*)
 +    echo "compile $scriptversion"
 +    exit $?
 +    ;;
 +esac
 +
 +ofile=
 +cfile=
 +eat=
 +
 +for arg
 +do
 +  if test -n "$eat"; then
 +    eat=
 +  else
 +    case $1 in
 +      -o)
 +      # configure might choose to run compile as `compile cc -o foo foo.c'.
 +      # So we strip `-o arg' only if arg is an object.
 +      eat=1
 +      case $2 in
 +        *.o | *.obj)
 +          ofile=$2
 +          ;;
 +        *)
 +          set x "$@" -o "$2"
 +          shift
 +          ;;
 +      esac
 +      ;;
 +      *.c)
 +      cfile=$1
 +      set x "$@" "$1"
 +      shift
 +      ;;
 +      *)
 +      set x "$@" "$1"
 +      shift
 +      ;;
 +    esac
 +  fi
 +  shift
 +done
 +
 +if test -z "$ofile" || test -z "$cfile"; then
 +  # If no `-o' option was seen then we might have been invoked from a
 +  # pattern rule where we don't need one.  That is ok -- this is a
 +  # normal compilation that the losing compiler can handle.  If no
 +  # `.c' file was seen then we are probably linking.  That is also
 +  # ok.
 +  exec "$@"
 +fi
 +
 +# Name of file we expect compiler to create.
 +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
 +
 +# Create the lock directory.
 +# Note: use `[/\\:.-]' here to ensure that we don't use the same name
 +# that we are using for the .o file.  Also, base the name on the expected
 +# object file name, since that is what matters with a parallel build.
 +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
 +while true; do
 +  if mkdir "$lockdir" >/dev/null 2>&1; then
 +    break
 +  fi
 +  sleep 1
 +done
 +# FIXME: race condition here if user kills between mkdir and trap.
 +trap "rmdir '$lockdir'; exit 1" 1 2 15
 +
 +# Run the compile.
 +"$@"
 +ret=$?
 +
 +if test -f "$cofile"; then
 +  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
 +elif test -f "${cofile}bj"; then
 +  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
 +fi
 +
 +rmdir "$lockdir"
 +exit $ret
 +
 +# Local Variables:
 +# mode: shell-script
 +# sh-indentation: 2
 +# eval: (add-hook 'write-file-hooks 'time-stamp)
 +# time-stamp-start: "scriptversion="
 +# time-stamp-format: "%:y-%02m-%02d.%02H"
 +# time-stamp-time-zone: "UTC"
 +# time-stamp-end: "; # UTC"
 +# End:

diff --cc build-aux/config.guess
index 0000000,0000000..c2246a4
new file mode 100755 (executable)
--- /dev/null
--- /dev/null
+++ b/build-aux/config.guess
@@@ -1,0 -1,0 +1,1502 @@@
++#! /bin/sh
++# Attempt to guess a canonical system name.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
++#   Free Software Foundation, Inc.
++
++timestamp='2009-12-30'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Originally written by Per Bothner.  Please send patches (context
++# diff format) to <config-patches@gnu.org> and include a ChangeLog
++# entry.
++#
++# This script attempts to guess a canonical system name similar to
++# config.sub.  If it succeeds, it prints the system name on stdout, and
++# exits with 0.  Otherwise, it exits with 1.
++#
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++  -h, --help         print this help, then exit
++  -t, --time-stamp   print date of last modification, then exit
++  -v, --version      print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
++Software Foundation, Inc.
++
++This is free software; see the source for copying conditions.  There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++  case $1 in
++    --time-stamp | --time* | -t )
++       echo "$timestamp" ; exit ;;
++    --version | -v )
++       echo "$version" ; exit ;;
++    --help | --h* | -h )
++       echo "$usage"; exit ;;
++    -- )     # Stop option processing
++       shift; break ;;
++    - )       # Use stdin as input.
++       break ;;
++    -* )
++       echo "$me: invalid option $1$help" >&2
++       exit 1 ;;
++    * )
++       break ;;
++  esac
++done
++
++if test $# != 0; then
++  echo "$me: too many arguments$help" >&2
++  exit 1
++fi
++
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,)    echo "int x;" > $dummy.c ;
++      for c in cc gcc c89 c99 ; do
++        if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++           CC_FOR_BUILD="$c"; break ;
++        fi ;
++      done ;
++      if test x"$CC_FOR_BUILD" = x ; then
++        CC_FOR_BUILD=no_compiler_found ;
++      fi
++      ;;
++ ,,*)   CC_FOR_BUILD=$CC ;;
++ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
++esac ; set_cc_for_build= ;'
++
++# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
++# (ghazi@noc.rutgers.edu 1994-08-24)
++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++      PATH=$PATH:/.attbin ; export PATH
++fi
++
++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
++
++# Note: order is significant - the case branches are not exclusive.
++
++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++    *:NetBSD:*:*)
++      # NetBSD (nbsd) targets should (where applicable) match one or
++      # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
++      # *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
++      # switched to ELF, *-*-netbsd* would select the old
++      # object file format.  This provides both forward
++      # compatibility and a consistent mechanism for selecting the
++      # object file format.
++      #
++      # Note: NetBSD doesn't particularly care about the vendor
++      # portion of the name.  We always set it to "unknown".
++      sysctl="sysctl -n hw.machine_arch"
++      UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++          /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++      case "${UNAME_MACHINE_ARCH}" in
++          armeb) machine=armeb-unknown ;;
++          arm*) machine=arm-unknown ;;
++          sh3el) machine=shl-unknown ;;
++          sh3eb) machine=sh-unknown ;;
++          sh5el) machine=sh5le-unknown ;;
++          *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++      esac
++      # The Operating System including object format, if it has switched
++      # to ELF recently, or will in the future.
++      case "${UNAME_MACHINE_ARCH}" in
++          arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++              eval $set_cc_for_build
++              if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++                      | grep -q __ELF__
++              then
++                  # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++                  # Return netbsd for either.  FIX?
++                  os=netbsd
++              else
++                  os=netbsdelf
++              fi
++              ;;
++          *)
++              os=netbsd
++              ;;
++      esac
++      # The OS release
++      # Debian GNU/NetBSD machines have a different userland, and
++      # thus, need a distinct triplet. However, they do not need
++      # kernel version information, so it can be replaced with a
++      # suitable tag, in the style of linux-gnu.
++      case "${UNAME_VERSION}" in
++          Debian*)
++              release='-gnu'
++              ;;
++          *)
++              release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++              ;;
++      esac
++      # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++      # contains redundant information, the shorter form:
++      # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++      echo "${machine}-${os}${release}"
++      exit ;;
++    *:OpenBSD:*:*)
++      UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++      echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++      exit ;;
++    *:ekkoBSD:*:*)
++      echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++      exit ;;
++    *:SolidBSD:*:*)
++      echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++      exit ;;
++    macppc:MirBSD:*:*)
++      echo powerpc-unknown-mirbsd${UNAME_RELEASE}
++      exit ;;
++    *:MirBSD:*:*)
++      echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++      exit ;;
++    alpha:OSF1:*:*)
++      case $UNAME_RELEASE in
++      *4.0)
++              UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++              ;;
++      *5.*)
++              UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++              ;;
++      esac
++      # According to Compaq, /usr/sbin/psrinfo has been available on
++      # OSF/1 and Tru64 systems produced since 1995.  I hope that
++      # covers most systems running today.  This code pipes the CPU
++      # types through head -n 1, so we only detect the type of CPU 0.
++      ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++      case "$ALPHA_CPU_TYPE" in
++          "EV4 (21064)")
++              UNAME_MACHINE="alpha" ;;
++          "EV4.5 (21064)")
++              UNAME_MACHINE="alpha" ;;
++          "LCA4 (21066/21068)")
++              UNAME_MACHINE="alpha" ;;
++          "EV5 (21164)")
++              UNAME_MACHINE="alphaev5" ;;
++          "EV5.6 (21164A)")
++              UNAME_MACHINE="alphaev56" ;;
++          "EV5.6 (21164PC)")
++              UNAME_MACHINE="alphapca56" ;;
++          "EV5.7 (21164PC)")
++              UNAME_MACHINE="alphapca57" ;;
++          "EV6 (21264)")
++              UNAME_MACHINE="alphaev6" ;;
++          "EV6.7 (21264A)")
++              UNAME_MACHINE="alphaev67" ;;
++          "EV6.8CB (21264C)")
++              UNAME_MACHINE="alphaev68" ;;
++          "EV6.8AL (21264B)")
++              UNAME_MACHINE="alphaev68" ;;
++          "EV6.8CX (21264D)")
++              UNAME_MACHINE="alphaev68" ;;
++          "EV6.9A (21264/EV69A)")
++              UNAME_MACHINE="alphaev69" ;;
++          "EV7 (21364)")
++              UNAME_MACHINE="alphaev7" ;;
++          "EV7.9 (21364A)")
++              UNAME_MACHINE="alphaev79" ;;
++      esac
++      # A Pn.n version is a patched version.
++      # A Vn.n version is a released version.
++      # A Tn.n version is a released field test version.
++      # A Xn.n version is an unreleased experimental baselevel.
++      # 1.2 uses "1.2" for uname -r.
++      echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++      exit ;;
++    Alpha\ *:Windows_NT*:*)
++      # How do we know it's Interix rather than the generic POSIX subsystem?
++      # Should we change UNAME_MACHINE based on the output of uname instead
++      # of the specific Alpha model?
++      echo alpha-pc-interix
++      exit ;;
++    21064:Windows_NT:50:3)
++      echo alpha-dec-winnt3.5
++      exit ;;
++    Amiga*:UNIX_System_V:4.0:*)
++      echo m68k-unknown-sysv4
++      exit ;;
++    *:[Aa]miga[Oo][Ss]:*:*)
++      echo ${UNAME_MACHINE}-unknown-amigaos
++      exit ;;
++    *:[Mm]orph[Oo][Ss]:*:*)
++      echo ${UNAME_MACHINE}-unknown-morphos
++      exit ;;
++    *:OS/390:*:*)
++      echo i370-ibm-openedition
++      exit ;;
++    *:z/VM:*:*)
++      echo s390-ibm-zvmoe
++      exit ;;
++    *:OS400:*:*)
++        echo powerpc-ibm-os400
++      exit ;;
++    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
++      echo arm-acorn-riscix${UNAME_RELEASE}
++      exit ;;
++    arm:riscos:*:*|arm:RISCOS:*:*)
++      echo arm-unknown-riscos
++      exit ;;
++    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++      echo hppa1.1-hitachi-hiuxmpp
++      exit ;;
++    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++      # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
++      if test "`(/bin/universe) 2>/dev/null`" = att ; then
++              echo pyramid-pyramid-sysv3
++      else
++              echo pyramid-pyramid-bsd
++      fi
++      exit ;;
++    NILE*:*:*:dcosx)
++      echo pyramid-pyramid-svr4
++      exit ;;
++    DRS?6000:unix:4.0:6*)
++      echo sparc-icl-nx6
++      exit ;;
++    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++      case `/usr/bin/uname -p` in
++          sparc) echo sparc-icl-nx7; exit ;;
++      esac ;;
++    s390x:SunOS:*:*)
++      echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    sun4H:SunOS:5.*:*)
++      echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++      echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
++      echo i386-pc-auroraux${UNAME_RELEASE}
++      exit ;;
++    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
++      eval $set_cc_for_build
++      SUN_ARCH="i386"
++      # If there is a compiler, see if it is configured for 64-bit objects.
++      # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
++      # This test works for both compilers.
++      if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++          if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
++              (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++              grep IS_64BIT_ARCH >/dev/null
++          then
++              SUN_ARCH="x86_64"
++          fi
++      fi
++      echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    sun4*:SunOS:6*:*)
++      # According to config.sub, this is the proper way to canonicalize
++      # SunOS6.  Hard to guess exactly what SunOS6 will be like, but
++      # it's likely to be more like Solaris than SunOS4.
++      echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    sun4*:SunOS:*:*)
++      case "`/usr/bin/arch -k`" in
++          Series*|S4*)
++              UNAME_RELEASE=`uname -v`
++              ;;
++      esac
++      # Japanese Language versions have a version number like `4.1.3-JL'.
++      echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
++      exit ;;
++    sun3*:SunOS:*:*)
++      echo m68k-sun-sunos${UNAME_RELEASE}
++      exit ;;
++    sun*:*:4.2BSD:*)
++      UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++      test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
++      case "`/bin/arch`" in
++          sun3)
++              echo m68k-sun-sunos${UNAME_RELEASE}
++              ;;
++          sun4)
++              echo sparc-sun-sunos${UNAME_RELEASE}
++              ;;
++      esac
++      exit ;;
++    aushp:SunOS:*:*)
++      echo sparc-auspex-sunos${UNAME_RELEASE}
++      exit ;;
++    # The situation for MiNT is a little confusing.  The machine name
++    # can be virtually everything (everything which is not
++    # "atarist" or "atariste" at least should have a processor
++    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
++    # to the lowercase version "mint" (or "freemint").  Finally
++    # the system name "TOS" denotes a system which is actually not
++    # MiNT.  But MiNT is downward compatible to TOS, so this should
++    # be no problem.
++    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++        echo m68k-atari-mint${UNAME_RELEASE}
++      exit ;;
++    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++      echo m68k-atari-mint${UNAME_RELEASE}
++        exit ;;
++    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++        echo m68k-atari-mint${UNAME_RELEASE}
++      exit ;;
++    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++        echo m68k-milan-mint${UNAME_RELEASE}
++        exit ;;
++    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++        echo m68k-hades-mint${UNAME_RELEASE}
++        exit ;;
++    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++        echo m68k-unknown-mint${UNAME_RELEASE}
++        exit ;;
++    m68k:machten:*:*)
++      echo m68k-apple-machten${UNAME_RELEASE}
++      exit ;;
++    powerpc:machten:*:*)
++      echo powerpc-apple-machten${UNAME_RELEASE}
++      exit ;;
++    RISC*:Mach:*:*)
++      echo mips-dec-mach_bsd4.3
++      exit ;;
++    RISC*:ULTRIX:*:*)
++      echo mips-dec-ultrix${UNAME_RELEASE}
++      exit ;;
++    VAX*:ULTRIX*:*:*)
++      echo vax-dec-ultrix${UNAME_RELEASE}
++      exit ;;
++    2020:CLIX:*:* | 2430:CLIX:*:*)
++      echo clipper-intergraph-clix${UNAME_RELEASE}
++      exit ;;
++    mips:*:*:UMIPS | mips:*:*:RISCos)
++      eval $set_cc_for_build
++      sed 's/^        //' << EOF >$dummy.c
++#ifdef __cplusplus
++#include <stdio.h>  /* for printf() prototype */
++      int main (int argc, char *argv[]) {
++#else
++      int main (argc, argv) int argc; char *argv[]; {
++#endif
++      #if defined (host_mips) && defined (MIPSEB)
++      #if defined (SYSTYPE_SYSV)
++        printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
++      #endif
++      #if defined (SYSTYPE_SVR4)
++        printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
++      #endif
++      #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++        printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
++      #endif
++      #endif
++        exit (-1);
++      }
++EOF
++      $CC_FOR_BUILD -o $dummy $dummy.c &&
++        dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++        SYSTEM_NAME=`$dummy $dummyarg` &&
++          { echo "$SYSTEM_NAME"; exit; }
++      echo mips-mips-riscos${UNAME_RELEASE}
++      exit ;;
++    Motorola:PowerMAX_OS:*:*)
++      echo powerpc-motorola-powermax
++      exit ;;
++    Motorola:*:4.3:PL8-*)
++      echo powerpc-harris-powermax
++      exit ;;
++    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++      echo powerpc-harris-powermax
++      exit ;;
++    Night_Hawk:Power_UNIX:*:*)
++      echo powerpc-harris-powerunix
++      exit ;;
++    m88k:CX/UX:7*:*)
++      echo m88k-harris-cxux7
++      exit ;;
++    m88k:*:4*:R4*)
++      echo m88k-motorola-sysv4
++      exit ;;
++    m88k:*:3*:R3*)
++      echo m88k-motorola-sysv3
++      exit ;;
++    AViiON:dgux:*:*)
++        # DG/UX returns AViiON for all architectures
++        UNAME_PROCESSOR=`/usr/bin/uname -p`
++      if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
++      then
++          if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
++             [ ${TARGET_BINARY_INTERFACE}x = x ]
++          then
++              echo m88k-dg-dgux${UNAME_RELEASE}
++          else
++              echo m88k-dg-dguxbcs${UNAME_RELEASE}
++          fi
++      else
++          echo i586-dg-dgux${UNAME_RELEASE}
++      fi
++      exit ;;
++    M88*:DolphinOS:*:*)       # DolphinOS (SVR3)
++      echo m88k-dolphin-sysv3
++      exit ;;
++    M88*:*:R3*:*)
++      # Delta 88k system running SVR3
++      echo m88k-motorola-sysv3
++      exit ;;
++    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
++      echo m88k-tektronix-sysv3
++      exit ;;
++    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
++      echo m68k-tektronix-bsd
++      exit ;;
++    *:IRIX*:*:*)
++      echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
++      exit ;;
++    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++      echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
++      exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
++    i*86:AIX:*:*)
++      echo i386-ibm-aix
++      exit ;;
++    ia64:AIX:*:*)
++      if [ -x /usr/bin/oslevel ] ; then
++              IBM_REV=`/usr/bin/oslevel`
++      else
++              IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++      fi
++      echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++      exit ;;
++    *:AIX:2:3)
++      if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++              eval $set_cc_for_build
++              sed 's/^                //' << EOF >$dummy.c
++              #include <sys/systemcfg.h>
++
++              main()
++                      {
++                      if (!__power_pc())
++                              exit(1);
++                      puts("powerpc-ibm-aix3.2.5");
++                      exit(0);
++                      }
++EOF
++              if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++              then
++                      echo "$SYSTEM_NAME"
++              else
++                      echo rs6000-ibm-aix3.2.5
++              fi
++      elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
++              echo rs6000-ibm-aix3.2.4
++      else
++              echo rs6000-ibm-aix3.2
++      fi
++      exit ;;
++    *:AIX:*:[456])
++      IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++      if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
++              IBM_ARCH=rs6000
++      else
++              IBM_ARCH=powerpc
++      fi
++      if [ -x /usr/bin/oslevel ] ; then
++              IBM_REV=`/usr/bin/oslevel`
++      else
++              IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++      fi
++      echo ${IBM_ARCH}-ibm-aix${IBM_REV}
++      exit ;;
++    *:AIX:*:*)
++      echo rs6000-ibm-aix
++      exit ;;
++    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++      echo romp-ibm-bsd4.4
++      exit ;;
++    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
++      echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
++      exit ;;                             # report: romp-ibm BSD 4.3
++    *:BOSX:*:*)
++      echo rs6000-bull-bosx
++      exit ;;
++    DPX/2?00:B.O.S.:*:*)
++      echo m68k-bull-sysv3
++      exit ;;
++    9000/[34]??:4.3bsd:1.*:*)
++      echo m68k-hp-bsd
++      exit ;;
++    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
++      echo m68k-hp-bsd4.4
++      exit ;;
++    9000/[34678]??:HP-UX:*:*)
++      HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++      case "${UNAME_MACHINE}" in
++          9000/31? )            HP_ARCH=m68000 ;;
++          9000/[34]?? )         HP_ARCH=m68k ;;
++          9000/[678][0-9][0-9])
++              if [ -x /usr/bin/getconf ]; then
++                  sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++                    case "${sc_cpu_version}" in
++                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++                      532)                      # CPU_PA_RISC2_0
++                        case "${sc_kernel_bits}" in
++                          32) HP_ARCH="hppa2.0n" ;;
++                          64) HP_ARCH="hppa2.0w" ;;
++                        '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
++                        esac ;;
++                    esac
++              fi
++              if [ "${HP_ARCH}" = "" ]; then
++                  eval $set_cc_for_build
++                  sed 's/^              //' << EOF >$dummy.c
++
++              #define _HPUX_SOURCE
++              #include <stdlib.h>
++              #include <unistd.h>
++
++              int main ()
++              {
++              #if defined(_SC_KERNEL_BITS)
++                  long bits = sysconf(_SC_KERNEL_BITS);
++              #endif
++                  long cpu  = sysconf (_SC_CPU_VERSION);
++
++                  switch (cpu)
++                      {
++                      case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++                      case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++                      case CPU_PA_RISC2_0:
++              #if defined(_SC_KERNEL_BITS)
++                          switch (bits)
++                              {
++                              case 64: puts ("hppa2.0w"); break;
++                              case 32: puts ("hppa2.0n"); break;
++                              default: puts ("hppa2.0"); break;
++                              } break;
++              #else  /* !defined(_SC_KERNEL_BITS) */
++                          puts ("hppa2.0"); break;
++              #endif
++                      default: puts ("hppa1.0"); break;
++                      }
++                  exit (0);
++              }
++EOF
++                  (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++                  test -z "$HP_ARCH" && HP_ARCH=hppa
++              fi ;;
++      esac
++      if [ ${HP_ARCH} = "hppa2.0w" ]
++      then
++          eval $set_cc_for_build
++
++          # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++          # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
++          # generating 64-bit code.  GNU and HP use different nomenclature:
++          #
++          # $ CC_FOR_BUILD=cc ./config.guess
++          # => hppa2.0w-hp-hpux11.23
++          # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++          # => hppa64-hp-hpux11.23
++
++          if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++              grep -q __LP64__
++          then
++              HP_ARCH="hppa2.0w"
++          else
++              HP_ARCH="hppa64"
++          fi
++      fi
++      echo ${HP_ARCH}-hp-hpux${HPUX_REV}
++      exit ;;
++    ia64:HP-UX:*:*)
++      HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++      echo ia64-hp-hpux${HPUX_REV}
++      exit ;;
++    3050*:HI-UX:*:*)
++      eval $set_cc_for_build
++      sed 's/^        //' << EOF >$dummy.c
++      #include <unistd.h>
++      int
++      main ()
++      {
++        long cpu = sysconf (_SC_CPU_VERSION);
++        /* The order matters, because CPU_IS_HP_MC68K erroneously returns
++           true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
++           results, however.  */
++        if (CPU_IS_PA_RISC (cpu))
++          {
++            switch (cpu)
++              {
++                case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
++                case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
++                case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
++                default: puts ("hppa-hitachi-hiuxwe2"); break;
++              }
++          }
++        else if (CPU_IS_HP_MC68K (cpu))
++          puts ("m68k-hitachi-hiuxwe2");
++        else puts ("unknown-hitachi-hiuxwe2");
++        exit (0);
++      }
++EOF
++      $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++              { echo "$SYSTEM_NAME"; exit; }
++      echo unknown-hitachi-hiuxwe2
++      exit ;;
++    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++      echo hppa1.1-hp-bsd
++      exit ;;
++    9000/8??:4.3bsd:*:*)
++      echo hppa1.0-hp-bsd
++      exit ;;
++    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++      echo hppa1.0-hp-mpeix
++      exit ;;
++    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++      echo hppa1.1-hp-osf
++      exit ;;
++    hp8??:OSF1:*:*)
++      echo hppa1.0-hp-osf
++      exit ;;
++    i*86:OSF1:*:*)
++      if [ -x /usr/sbin/sysversion ] ; then
++          echo ${UNAME_MACHINE}-unknown-osf1mk
++      else
++          echo ${UNAME_MACHINE}-unknown-osf1
++      fi
++      exit ;;
++    parisc*:Lites*:*:*)
++      echo hppa1.1-hp-lites
++      exit ;;
++    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
++      echo c1-convex-bsd
++        exit ;;
++    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
++      if getsysinfo -f scalar_acc
++      then echo c32-convex-bsd
++      else echo c2-convex-bsd
++      fi
++        exit ;;
++    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
++      echo c34-convex-bsd
++        exit ;;
++    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
++      echo c38-convex-bsd
++        exit ;;
++    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
++      echo c4-convex-bsd
++        exit ;;
++    CRAY*Y-MP:*:*:*)
++      echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++      exit ;;
++    CRAY*[A-Z]90:*:*:*)
++      echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
++      | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++            -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++            -e 's/\.[^.]*$/.X/'
++      exit ;;
++    CRAY*TS:*:*:*)
++      echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++      exit ;;
++    CRAY*T3E:*:*:*)
++      echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++      exit ;;
++    CRAY*SV1:*:*:*)
++      echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++      exit ;;
++    *:UNICOS/mp:*:*)
++      echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++      exit ;;
++    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++      FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
++        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++        exit ;;
++    5000:UNIX_System_V:4.*:*)
++        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++      exit ;;
++    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++      echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
++      exit ;;
++    sparc*:BSD/OS:*:*)
++      echo sparc-unknown-bsdi${UNAME_RELEASE}
++      exit ;;
++    *:BSD/OS:*:*)
++      echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
++      exit ;;
++    *:FreeBSD:*:*)
++      case ${UNAME_MACHINE} in
++          pc98)
++              echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++          amd64)
++              echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++          *)
++              echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++      esac
++      exit ;;
++    i*:CYGWIN*:*)
++      echo ${UNAME_MACHINE}-pc-cygwin
++      exit ;;
++    *:MINGW*:*)
++      echo ${UNAME_MACHINE}-pc-mingw32
++      exit ;;
++    i*:windows32*:*)
++      # uname -m includes "-pc" on this system.
++      echo ${UNAME_MACHINE}-mingw32
++      exit ;;
++    i*:PW*:*)
++      echo ${UNAME_MACHINE}-pc-pw32
++      exit ;;
++    *:Interix*:*)
++      case ${UNAME_MACHINE} in
++          x86)
++              echo i586-pc-interix${UNAME_RELEASE}
++              exit ;;
++          authenticamd | genuineintel | EM64T)
++              echo x86_64-unknown-interix${UNAME_RELEASE}
++              exit ;;
++          IA64)
++              echo ia64-unknown-interix${UNAME_RELEASE}
++              exit ;;
++      esac ;;
++    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++      echo i${UNAME_MACHINE}-pc-mks
++      exit ;;
++    8664:Windows_NT:*)
++      echo x86_64-pc-mks
++      exit ;;
++    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
++      # How do we know it's Interix rather than the generic POSIX subsystem?
++      # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
++      # UNAME_MACHINE based on the output of uname instead of i386?
++      echo i586-pc-interix
++      exit ;;
++    i*:UWIN*:*)
++      echo ${UNAME_MACHINE}-pc-uwin
++      exit ;;
++    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++      echo x86_64-unknown-cygwin
++      exit ;;
++    p*:CYGWIN*:*)
++      echo powerpcle-unknown-cygwin
++      exit ;;
++    prep*:SunOS:5.*:*)
++      echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++      exit ;;
++    *:GNU:*:*)
++      # the GNU system
++      echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++      exit ;;
++    *:GNU/*:*:*)
++      # other systems with GNU libc and userland
++      echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++      exit ;;
++    i*86:Minix:*:*)
++      echo ${UNAME_MACHINE}-pc-minix
++      exit ;;
++    alpha:Linux:*:*)
++      case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++        EV5)   UNAME_MACHINE=alphaev5 ;;
++        EV56)  UNAME_MACHINE=alphaev56 ;;
++        PCA56) UNAME_MACHINE=alphapca56 ;;
++        PCA57) UNAME_MACHINE=alphapca56 ;;
++        EV6)   UNAME_MACHINE=alphaev6 ;;
++        EV67)  UNAME_MACHINE=alphaev67 ;;
++        EV68*) UNAME_MACHINE=alphaev68 ;;
++        esac
++      objdump --private-headers /bin/sh | grep -q ld.so.1
++      if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++      echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++      exit ;;
++    arm*:Linux:*:*)
++      eval $set_cc_for_build
++      if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++          | grep -q __ARM_EABI__
++      then
++          echo ${UNAME_MACHINE}-unknown-linux-gnu
++      else
++          echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++      fi
++      exit ;;
++    avr32*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    cris:Linux:*:*)
++      echo cris-axis-linux-gnu
++      exit ;;
++    crisv32:Linux:*:*)
++      echo crisv32-axis-linux-gnu
++      exit ;;
++    frv:Linux:*:*)
++      echo frv-unknown-linux-gnu
++      exit ;;
++    i*86:Linux:*:*)
++      LIBC=gnu
++      eval $set_cc_for_build
++      sed 's/^        //' << EOF >$dummy.c
++      #ifdef __dietlibc__
++      LIBC=dietlibc
++      #endif
++EOF
++      eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
++      echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++      exit ;;
++    ia64:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    m32r*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    m68*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    mips:Linux:*:* | mips64:Linux:*:*)
++      eval $set_cc_for_build
++      sed 's/^        //' << EOF >$dummy.c
++      #undef CPU
++      #undef ${UNAME_MACHINE}
++      #undef ${UNAME_MACHINE}el
++      #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++      CPU=${UNAME_MACHINE}el
++      #else
++      #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++      CPU=${UNAME_MACHINE}
++      #else
++      CPU=
++      #endif
++      #endif
++EOF
++      eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
++      test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++      ;;
++    or32:Linux:*:*)
++      echo or32-unknown-linux-gnu
++      exit ;;
++    padre:Linux:*:*)
++      echo sparc-unknown-linux-gnu
++      exit ;;
++    parisc64:Linux:*:* | hppa64:Linux:*:*)
++      echo hppa64-unknown-linux-gnu
++      exit ;;
++    parisc:Linux:*:* | hppa:Linux:*:*)
++      # Look for CPU level
++      case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++        PA7*) echo hppa1.1-unknown-linux-gnu ;;
++        PA8*) echo hppa2.0-unknown-linux-gnu ;;
++        *)    echo hppa-unknown-linux-gnu ;;
++      esac
++      exit ;;
++    ppc64:Linux:*:*)
++      echo powerpc64-unknown-linux-gnu
++      exit ;;
++    ppc:Linux:*:*)
++      echo powerpc-unknown-linux-gnu
++      exit ;;
++    s390:Linux:*:* | s390x:Linux:*:*)
++      echo ${UNAME_MACHINE}-ibm-linux
++      exit ;;
++    sh64*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    sh*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    sparc:Linux:*:* | sparc64:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    vax:Linux:*:*)
++      echo ${UNAME_MACHINE}-dec-linux-gnu
++      exit ;;
++    x86_64:Linux:*:*)
++      echo x86_64-unknown-linux-gnu
++      exit ;;
++    xtensa*:Linux:*:*)
++      echo ${UNAME_MACHINE}-unknown-linux-gnu
++      exit ;;
++    i*86:DYNIX/ptx:4*:*)
++      # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++      # earlier versions are messed up and put the nodename in both
++      # sysname and nodename.
++      echo i386-sequent-sysv4
++      exit ;;
++    i*86:UNIX_SV:4.2MP:2.*)
++        # Unixware is an offshoot of SVR4, but it has its own version
++        # number series starting with 2...
++        # I am not positive that other SVR4 systems won't match this,
++      # I just have to hope.  -- rms.
++        # Use sysv4.2uw... so that sysv4* matches it.
++      echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
++      exit ;;
++    i*86:OS/2:*:*)
++      # If we were able to find `uname', then EMX Unix compatibility
++      # is probably installed.
++      echo ${UNAME_MACHINE}-pc-os2-emx
++      exit ;;
++    i*86:XTS-300:*:STOP)
++      echo ${UNAME_MACHINE}-unknown-stop
++      exit ;;
++    i*86:atheos:*:*)
++      echo ${UNAME_MACHINE}-unknown-atheos
++      exit ;;
++    i*86:syllable:*:*)
++      echo ${UNAME_MACHINE}-pc-syllable
++      exit ;;
++    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
++      echo i386-unknown-lynxos${UNAME_RELEASE}
++      exit ;;
++    i*86:*DOS:*:*)
++      echo ${UNAME_MACHINE}-pc-msdosdjgpp
++      exit ;;
++    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
++      UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
++      if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
++              echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
++      else
++              echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
++      fi
++      exit ;;
++    i*86:*:5:[678]*)
++      # UnixWare 7.x, OpenUNIX and OpenServer 6.
++      case `/bin/uname -X | grep "^Machine"` in
++          *486*)           UNAME_MACHINE=i486 ;;
++          *Pentium)        UNAME_MACHINE=i586 ;;
++          *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++      esac
++      echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++      exit ;;
++    i*86:*:3.2:*)
++      if test -f /usr/options/cb.name; then
++              UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
++              echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
++      elif /bin/uname -X 2>/dev/null >/dev/null ; then
++              UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++              (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++              (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
++                      && UNAME_MACHINE=i586
++              (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++                      && UNAME_MACHINE=i686
++              (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++                      && UNAME_MACHINE=i686
++              echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
++      else
++              echo ${UNAME_MACHINE}-pc-sysv32
++      fi
++      exit ;;
++    pc:*:*:*)
++      # Left here for compatibility:
++        # uname -m prints for DJGPP always 'pc', but it prints nothing about
++        # the processor, so we play safe by assuming i586.
++      # Note: whatever this is, it MUST be the same as what config.sub
++      # prints for the "djgpp" host, or else GDB configury will decide that
++      # this is a cross-build.
++      echo i586-pc-msdosdjgpp
++        exit ;;
++    Intel:Mach:3*:*)
++      echo i386-pc-mach3
++      exit ;;
++    paragon:*:*:*)
++      echo i860-intel-osf1
++      exit ;;
++    i860:*:4.*:*) # i860-SVR4
++      if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
++        echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++      else # Add other i860-SVR4 vendors below as they are discovered.
++        echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
++      fi
++      exit ;;
++    mini*:CTIX:SYS*5:*)
++      # "miniframe"
++      echo m68010-convergent-sysv
++      exit ;;
++    mc68k:UNIX:SYSTEM5:3.51m)
++      echo m68k-convergent-sysv
++      exit ;;
++    M680?0:D-NIX:5.3:*)
++      echo m68k-diab-dnix
++      exit ;;
++    M68*:*:R3V[5678]*:*)
++      test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
++      OS_REL=''
++      test -r /etc/.relid \
++      && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++      /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++        && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++      /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++        && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
++        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++          && { echo i486-ncr-sysv4; exit; } ;;
++    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
++      OS_REL='.3'
++      test -r /etc/.relid \
++          && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++      /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++          && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++      /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++          && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
++      /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
++          && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++      echo m68k-unknown-lynxos${UNAME_RELEASE}
++      exit ;;
++    mc68030:UNIX_System_V:4.*:*)
++      echo m68k-atari-sysv4
++      exit ;;
++    TSUNAMI:LynxOS:2.*:*)
++      echo sparc-unknown-lynxos${UNAME_RELEASE}
++      exit ;;
++    rs6000:LynxOS:2.*:*)
++      echo rs6000-unknown-lynxos${UNAME_RELEASE}
++      exit ;;
++    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
++      echo powerpc-unknown-lynxos${UNAME_RELEASE}
++      exit ;;
++    SM[BE]S:UNIX_SV:*:*)
++      echo mips-dde-sysv${UNAME_RELEASE}
++      exit ;;
++    RM*:ReliantUNIX-*:*:*)
++      echo mips-sni-sysv4
++      exit ;;
++    RM*:SINIX-*:*:*)
++      echo mips-sni-sysv4
++      exit ;;
++    *:SINIX-*:*:*)
++      if uname -p 2>/dev/null >/dev/null ; then
++              UNAME_MACHINE=`(uname -p) 2>/dev/null`
++              echo ${UNAME_MACHINE}-sni-sysv4
++      else
++              echo ns32k-sni-sysv
++      fi
++      exit ;;
++    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++                      # says <Richard.M.Bartel@ccMail.Census.GOV>
++        echo i586-unisys-sysv4
++        exit ;;
++    *:UNIX_System_V:4*:FTX*)
++      # From Gerald Hewes <hewes@openmarket.com>.
++      # How about differentiating between stratus architectures? -djm
++      echo hppa1.1-stratus-sysv4
++      exit ;;
++    *:*:*:FTX*)
++      # From seanf@swdc.stratus.com.
++      echo i860-stratus-sysv4
++      exit ;;
++    i*86:VOS:*:*)
++      # From Paul.Green@stratus.com.
++      echo ${UNAME_MACHINE}-stratus-vos
++      exit ;;
++    *:VOS:*:*)
++      # From Paul.Green@stratus.com.
++      echo hppa1.1-stratus-vos
++      exit ;;
++    mc68*:A/UX:*:*)
++      echo m68k-apple-aux${UNAME_RELEASE}
++      exit ;;
++    news*:NEWS-OS:6*:*)
++      echo mips-sony-newsos6
++      exit ;;
++    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
++      if [ -d /usr/nec ]; then
++              echo mips-nec-sysv${UNAME_RELEASE}
++      else
++              echo mips-unknown-sysv${UNAME_RELEASE}
++      fi
++        exit ;;
++    BeBox:BeOS:*:*)   # BeOS running on hardware made by Be, PPC only.
++      echo powerpc-be-beos
++      exit ;;
++    BeMac:BeOS:*:*)   # BeOS running on Mac or Mac clone, PPC only.
++      echo powerpc-apple-beos
++      exit ;;
++    BePC:BeOS:*:*)    # BeOS running on Intel PC compatible.
++      echo i586-pc-beos
++      exit ;;
++    BePC:Haiku:*:*)   # Haiku running on Intel PC compatible.
++      echo i586-pc-haiku
++      exit ;;
++    SX-4:SUPER-UX:*:*)
++      echo sx4-nec-superux${UNAME_RELEASE}
++      exit ;;
++    SX-5:SUPER-UX:*:*)
++      echo sx5-nec-superux${UNAME_RELEASE}
++      exit ;;
++    SX-6:SUPER-UX:*:*)
++      echo sx6-nec-superux${UNAME_RELEASE}
++      exit ;;
++    SX-7:SUPER-UX:*:*)
++      echo sx7-nec-superux${UNAME_RELEASE}
++      exit ;;
++    SX-8:SUPER-UX:*:*)
++      echo sx8-nec-superux${UNAME_RELEASE}
++      exit ;;
++    SX-8R:SUPER-UX:*:*)
++      echo sx8r-nec-superux${UNAME_RELEASE}
++      exit ;;
++    Power*:Rhapsody:*:*)
++      echo powerpc-apple-rhapsody${UNAME_RELEASE}
++      exit ;;
++    *:Rhapsody:*:*)
++      echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
++      exit ;;
++    *:Darwin:*:*)
++      UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++      case $UNAME_PROCESSOR in
++          i386)
++              eval $set_cc_for_build
++              if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++                if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++                    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++                    grep IS_64BIT_ARCH >/dev/null
++                then
++                    UNAME_PROCESSOR="x86_64"
++                fi
++              fi ;;
++          unknown) UNAME_PROCESSOR=powerpc ;;
++      esac
++      echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++      exit ;;
++    *:procnto*:*:* | *:QNX:[0123456789]*:*)
++      UNAME_PROCESSOR=`uname -p`
++      if test "$UNAME_PROCESSOR" = "x86"; then
++              UNAME_PROCESSOR=i386
++              UNAME_MACHINE=pc
++      fi
++      echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++      exit ;;
++    *:QNX:*:4*)
++      echo i386-pc-qnx
++      exit ;;
++    NSE-?:NONSTOP_KERNEL:*:*)
++      echo nse-tandem-nsk${UNAME_RELEASE}
++      exit ;;
++    NSR-?:NONSTOP_KERNEL:*:*)
++      echo nsr-tandem-nsk${UNAME_RELEASE}
++      exit ;;
++    *:NonStop-UX:*:*)
++      echo mips-compaq-nonstopux
++      exit ;;
++    BS2000:POSIX*:*:*)
++      echo bs2000-siemens-sysv
++      exit ;;
++    DS/*:UNIX_System_V:*:*)
++      echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++      exit ;;
++    *:Plan9:*:*)
++      # "uname -m" is not consistent, so use $cputype instead. 386
++      # is converted to i386 for consistency with other x86
++      # operating systems.
++      if test "$cputype" = "386"; then
++          UNAME_MACHINE=i386
++      else
++          UNAME_MACHINE="$cputype"
++      fi
++      echo ${UNAME_MACHINE}-unknown-plan9
++      exit ;;
++    *:TOPS-10:*:*)
++      echo pdp10-unknown-tops10
++      exit ;;
++    *:TENEX:*:*)
++      echo pdp10-unknown-tenex
++      exit ;;
++    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++      echo pdp10-dec-tops20
++      exit ;;
++    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++      echo pdp10-xkl-tops20
++      exit ;;
++    *:TOPS-20:*:*)
++      echo pdp10-unknown-tops20
++      exit ;;
++    *:ITS:*:*)
++      echo pdp10-unknown-its
++      exit ;;
++    SEI:*:*:SEIUX)
++        echo mips-sei-seiux${UNAME_RELEASE}
++      exit ;;
++    *:DragonFly:*:*)
++      echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++      exit ;;
++    *:*VMS:*:*)
++      UNAME_MACHINE=`(uname -p) 2>/dev/null`
++      case "${UNAME_MACHINE}" in
++          A*) echo alpha-dec-vms ; exit ;;
++          I*) echo ia64-dec-vms ; exit ;;
++          V*) echo vax-dec-vms ; exit ;;
++      esac ;;
++    *:XENIX:*:SysV)
++      echo i386-pc-xenix
++      exit ;;
++    i*86:skyos:*:*)
++      echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++      exit ;;
++    i*86:rdos:*:*)
++      echo ${UNAME_MACHINE}-pc-rdos
++      exit ;;
++    i*86:AROS:*:*)
++      echo ${UNAME_MACHINE}-pc-aros
++      exit ;;
++esac
++
++#echo '(No uname command or uname output not recognized.)' 1>&2
++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
++
++eval $set_cc_for_build
++cat >$dummy.c <<EOF
++#ifdef _SEQUENT_
++# include <sys/types.h>
++# include <sys/utsname.h>
++#endif
++main ()
++{
++#if defined (sony)
++#if defined (MIPSEB)
++  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
++     I don't know....  */
++  printf ("mips-sony-bsd\n"); exit (0);
++#else
++#include <sys/param.h>
++  printf ("m68k-sony-newsos%s\n",
++#ifdef NEWSOS4
++          "4"
++#else
++        ""
++#endif
++         ); exit (0);
++#endif
++#endif
++
++#if defined (__arm) && defined (__acorn) && defined (__unix)
++  printf ("arm-acorn-riscix\n"); exit (0);
++#endif
++
++#if defined (hp300) && !defined (hpux)
++  printf ("m68k-hp-bsd\n"); exit (0);
++#endif
++
++#if defined (NeXT)
++#if !defined (__ARCHITECTURE__)
++#define __ARCHITECTURE__ "m68k"
++#endif
++  int version;
++  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
++  if (version < 4)
++    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++  else
++    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
++  exit (0);
++#endif
++
++#if defined (MULTIMAX) || defined (n16)
++#if defined (UMAXV)
++  printf ("ns32k-encore-sysv\n"); exit (0);
++#else
++#if defined (CMU)
++  printf ("ns32k-encore-mach\n"); exit (0);
++#else
++  printf ("ns32k-encore-bsd\n"); exit (0);
++#endif
++#endif
++#endif
++
++#if defined (__386BSD__)
++  printf ("i386-pc-bsd\n"); exit (0);
++#endif
++
++#if defined (sequent)
++#if defined (i386)
++  printf ("i386-sequent-dynix\n"); exit (0);
++#endif
++#if defined (ns32000)
++  printf ("ns32k-sequent-dynix\n"); exit (0);
++#endif
++#endif
++
++#if defined (_SEQUENT_)
++    struct utsname un;
++
++    uname(&un);
++
++    if (strncmp(un.version, "V2", 2) == 0) {
++      printf ("i386-sequent-ptx2\n"); exit (0);
++    }
++    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++      printf ("i386-sequent-ptx1\n"); exit (0);
++    }
++    printf ("i386-sequent-ptx\n"); exit (0);
++
++#endif
++
++#if defined (vax)
++# if !defined (ultrix)
++#  include <sys/param.h>
++#  if defined (BSD)
++#   if BSD == 43
++      printf ("vax-dec-bsd4.3\n"); exit (0);
++#   else
++#    if BSD == 199006
++      printf ("vax-dec-bsd4.3reno\n"); exit (0);
++#    else
++      printf ("vax-dec-bsd\n"); exit (0);
++#    endif
++#   endif
++#  else
++    printf ("vax-dec-bsd\n"); exit (0);
++#  endif
++# else
++    printf ("vax-dec-ultrix\n"); exit (0);
++# endif
++#endif
++
++#if defined (alliant) && defined (i860)
++  printf ("i860-alliant-bsd\n"); exit (0);
++#endif
++
++  exit (1);
++}
++EOF
++
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++      { echo "$SYSTEM_NAME"; exit; }
++
++# Apollos put the system type in the environment.
++
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
++
++# Convex versions that predate uname can use getsysinfo(1)
++
++if [ -x /usr/convex/getsysinfo ]
++then
++    case `getsysinfo -f cpu_type` in
++    c1*)
++      echo c1-convex-bsd
++      exit ;;
++    c2*)
++      if getsysinfo -f scalar_acc
++      then echo c32-convex-bsd
++      else echo c2-convex-bsd
++      fi
++      exit ;;
++    c34*)
++      echo c34-convex-bsd
++      exit ;;
++    c38*)
++      echo c38-convex-bsd
++      exit ;;
++    c4*)
++      echo c4-convex-bsd
++      exit ;;
++    esac
++fi
++
++cat >&2 <<EOF
++$0: unable to guess system type
++
++This script, last modified $timestamp, has failed to recognize
++the operating system you are using. It is advised that you
++download the most up to date version of the config scripts from
++
++  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++and
++  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++If the version you run ($0) is already up to date, please
++send the following data and any information you think might be
++pertinent to <config-patches@gnu.org> in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo               = `(hostinfo) 2>/dev/null`
++/bin/universe          = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch              = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM  = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
++
++exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:

diff --cc build-aux/config.sub
index 0000000,0000000..c2d1257
new file mode 100755 (executable)
--- /dev/null
--- /dev/null
+++ b/build-aux/config.sub
@@@ -1,0 -1,0 +1,1714 @@@
++#! /bin/sh
++# Configuration validation subroutine script.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
++#   Free Software Foundation, Inc.
++
++timestamp='2010-01-22'
++
++# This file is (in principle) common to ALL GNU software.
++# The presence of a machine in this file suggests that SOME GNU software
++# can handle that machine.  It does not imply ALL GNU software can.
++#
++# This file is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Please send patches to <config-patches@gnu.org>.  Submit a context
++# diff and a properly formatted GNU ChangeLog entry.
++#
++# Configuration subroutine to validate and canonicalize a configuration type.
++# Supply the specified configuration type as an argument.
++# If it is invalid, we print an error message on stderr and exit with code 1.
++# Otherwise, we print the canonical config type on stdout and succeed.
++
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++# This file is supposed to be the same for all GNU packages
++# and recognize all the CPU types, system types and aliases
++# that are meaningful with *any* GNU software.
++# Each package is responsible for reporting which valid configurations
++# it does not support.  The user should be able to distinguish
++# a failure to support a valid configuration from a meaningless
++# configuration.
++
++# The goal of this file is to map all the various variations of a given
++# machine specification into a single specification in the form:
++#     CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or in some cases, the newer four-part form:
++#     CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
++# It is wrong to echo any other type of specification.
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS
++       $0 [OPTION] ALIAS
++
++Canonicalize a configuration name.
++
++Operation modes:
++  -h, --help         print this help, then exit
++  -t, --time-stamp   print date of last modification, then exit
++  -v, --version      print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
++Software Foundation, Inc.
++
++This is free software; see the source for copying conditions.  There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++  case $1 in
++    --time-stamp | --time* | -t )
++       echo "$timestamp" ; exit ;;
++    --version | -v )
++       echo "$version" ; exit ;;
++    --help | --h* | -h )
++       echo "$usage"; exit ;;
++    -- )     # Stop option processing
++       shift; break ;;
++    - )       # Use stdin as input.
++       break ;;
++    -* )
++       echo "$me: invalid option $1$help"
++       exit 1 ;;
++
++    *local*)
++       # First pass through any local machine types.
++       echo $1
++       exit ;;
++
++    * )
++       break ;;
++  esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++    exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++    exit 1;;
++esac
++
++# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
++# Here we must recognize all the valid KERNEL-OS combinations.
++maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
++case $maybe_os in
++  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
++  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
++  kopensolaris*-gnu* | \
++  storm-chaos* | os2-emx* | rtmk-nova*)
++    os=-$maybe_os
++    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
++    ;;
++  *)
++    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
++    if [ $basic_machine != $1 ]
++    then os=`echo $1 | sed 's/.*-/-/'`
++    else os=; fi
++    ;;
++esac
++
++### Let's recognize common machines as not being operating systems so
++### that things like config.sub decstation-3100 work.  We also
++### recognize some manufacturers as not being operating systems, so we
++### can provide default operating systems below.
++case $os in
++      -sun*os*)
++              # Prevent following clause from handling this invalid input.
++              ;;
++      -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
++      -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
++      -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
++      -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
++      -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
++      -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
++      -apple | -axis | -knuth | -cray | -microblaze)
++              os=
++              basic_machine=$1
++              ;;
++        -bluegene*)
++              os=-cnk
++              ;;
++      -sim | -cisco | -oki | -wec | -winbond)
++              os=
++              basic_machine=$1
++              ;;
++      -scout)
++              ;;
++      -wrs)
++              os=-vxworks
++              basic_machine=$1
++              ;;
++      -chorusos*)
++              os=-chorusos
++              basic_machine=$1
++              ;;
++      -chorusrdb)
++              os=-chorusrdb
++              basic_machine=$1
++              ;;
++      -hiux*)
++              os=-hiuxwe2
++              ;;
++      -sco6)
++              os=-sco5v6
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco5)
++              os=-sco3.2v5
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco4)
++              os=-sco3.2v4
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco3.2.[4-9]*)
++              os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco3.2v[4-9]*)
++              # Don't forget version if it is 3.2v4 or newer.
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco5v6*)
++              # Don't forget version if it is 3.2v4 or newer.
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -sco*)
++              os=-sco3.2v2
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -udk*)
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -isc)
++              os=-isc2.2
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -clix*)
++              basic_machine=clipper-intergraph
++              ;;
++      -isc*)
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++              ;;
++      -lynx*)
++              os=-lynxos
++              ;;
++      -ptx*)
++              basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
++              ;;
++      -windowsnt*)
++              os=`echo $os | sed -e 's/windowsnt/winnt/'`
++              ;;
++      -psos*)
++              os=-psos
++              ;;
++      -mint | -mint[0-9]*)
++              basic_machine=m68k-atari
++              os=-mint
++              ;;
++esac
++
++# Decode aliases for certain CPU-COMPANY combinations.
++case $basic_machine in
++      # Recognize the basic CPU types without company name.
++      # Some are omitted here because they have special meanings below.
++      1750a | 580 \
++      | a29k \
++      | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++      | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++      | am33_2.0 \
++      | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
++      | bfin \
++      | c4x | clipper \
++      | d10v | d30v | dlx | dsp16xx \
++      | fido | fr30 | frv \
++      | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++      | i370 | i860 | i960 | ia64 \
++      | ip2k | iq2000 \
++      | lm32 \
++      | m32c | m32r | m32rle | m68000 | m68k | m88k \
++      | maxq | mb | microblaze | mcore | mep | metag \
++      | mips | mipsbe | mipseb | mipsel | mipsle \
++      | mips16 \
++      | mips64 | mips64el \
++      | mips64octeon | mips64octeonel \
++      | mips64orion | mips64orionel \
++      | mips64r5900 | mips64r5900el \
++      | mips64vr | mips64vrel \
++      | mips64vr4100 | mips64vr4100el \
++      | mips64vr4300 | mips64vr4300el \
++      | mips64vr5000 | mips64vr5000el \
++      | mips64vr5900 | mips64vr5900el \
++      | mipsisa32 | mipsisa32el \
++      | mipsisa32r2 | mipsisa32r2el \
++      | mipsisa64 | mipsisa64el \
++      | mipsisa64r2 | mipsisa64r2el \
++      | mipsisa64sb1 | mipsisa64sb1el \
++      | mipsisa64sr71k | mipsisa64sr71kel \
++      | mipstx39 | mipstx39el \
++      | mn10200 | mn10300 \
++      | moxie \
++      | mt \
++      | msp430 \
++      | nios | nios2 \
++      | ns16k | ns32k \
++      | or32 \
++      | pdp10 | pdp11 | pj | pjl \
++      | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
++      | pyramid \
++      | rx \
++      | score \
++      | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
++      | sh64 | sh64le \
++      | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
++      | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
++      | spu | strongarm \
++      | tahoe | thumb | tic4x | tic80 | tron \
++      | ubicom32 \
++      | v850 | v850e \
++      | we32k \
++      | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
++      | z8k | z80)
++              basic_machine=$basic_machine-unknown
++              ;;
++      m6811 | m68hc11 | m6812 | m68hc12 | picochip)
++              # Motorola 68HC11/12.
++              basic_machine=$basic_machine-unknown
++              os=-none
++              ;;
++      m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++              ;;
++      ms1)
++              basic_machine=mt-unknown
++              ;;
++
++      # We use `pc' rather than `unknown'
++      # because (1) that's what they normally are, and
++      # (2) the word "unknown" tends to confuse beginning users.
++      i*86 | x86_64)
++        basic_machine=$basic_machine-pc
++        ;;
++      # Object if more than one company name word.
++      *-*-*)
++              echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++              exit 1
++              ;;
++      # Recognize the basic CPU types with company name.
++      580-* \
++      | a29k-* \
++      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++      | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++      | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++      | arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
++      | avr-* | avr32-* \
++      | bfin-* | bs2000-* \
++      | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
++      | clipper-* | craynv-* | cydra-* \
++      | d10v-* | d30v-* | dlx-* \
++      | elxsi-* \
++      | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
++      | h8300-* | h8500-* \
++      | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++      | i*86-* | i860-* | i960-* | ia64-* \
++      | ip2k-* | iq2000-* \
++      | lm32-* \
++      | m32c-* | m32r-* | m32rle-* \
++      | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++      | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
++      | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++      | mips16-* \
++      | mips64-* | mips64el-* \
++      | mips64octeon-* | mips64octeonel-* \
++      | mips64orion-* | mips64orionel-* \
++      | mips64r5900-* | mips64r5900el-* \
++      | mips64vr-* | mips64vrel-* \
++      | mips64vr4100-* | mips64vr4100el-* \
++      | mips64vr4300-* | mips64vr4300el-* \
++      | mips64vr5000-* | mips64vr5000el-* \
++      | mips64vr5900-* | mips64vr5900el-* \
++      | mipsisa32-* | mipsisa32el-* \
++      | mipsisa32r2-* | mipsisa32r2el-* \
++      | mipsisa64-* | mipsisa64el-* \
++      | mipsisa64r2-* | mipsisa64r2el-* \
++      | mipsisa64sb1-* | mipsisa64sb1el-* \
++      | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++      | mipstx39-* | mipstx39el-* \
++      | mmix-* \
++      | mt-* \
++      | msp430-* \
++      | nios-* | nios2-* \
++      | none-* | np1-* | ns16k-* | ns32k-* \
++      | orion-* \
++      | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++      | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
++      | pyramid-* \
++      | romp-* | rs6000-* | rx-* \
++      | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
++      | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++      | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
++      | sparclite-* \
++      | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
++      | tahoe-* | thumb-* \
++      | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++      | tile-* | tilegx-* \
++      | tron-* \
++      | ubicom32-* \
++      | v850-* | v850e-* | vax-* \
++      | we32k-* \
++      | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
++      | xstormy16-* | xtensa*-* \
++      | ymp-* \
++      | z8k-* | z80-*)
++              ;;
++      # Recognize the basic CPU types without company name, with glob match.
++      xtensa*)
++              basic_machine=$basic_machine-unknown
++              ;;
++      # Recognize the various machine names and aliases which stand
++      # for a CPU type and a company and sometimes even an OS.
++      386bsd)
++              basic_machine=i386-unknown
++              os=-bsd
++              ;;
++      3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
++              basic_machine=m68000-att
++              ;;
++      3b*)
++              basic_machine=we32k-att
++              ;;
++      a29khif)
++              basic_machine=a29k-amd
++              os=-udi
++              ;;
++      abacus)
++              basic_machine=abacus-unknown
++              ;;
++      adobe68k)
++              basic_machine=m68010-adobe
++              os=-scout
++              ;;
++      alliant | fx80)
++              basic_machine=fx80-alliant
++              ;;
++      altos | altos3068)
++              basic_machine=m68k-altos
++              ;;
++      am29k)
++              basic_machine=a29k-none
++              os=-bsd
++              ;;
++      amd64)
++              basic_machine=x86_64-pc
++              ;;
++      amd64-*)
++              basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      amdahl)
++              basic_machine=580-amdahl
++              os=-sysv
++              ;;
++      amiga | amiga-*)
++              basic_machine=m68k-unknown
++              ;;
++      amigaos | amigados)
++              basic_machine=m68k-unknown
++              os=-amigaos
++              ;;
++      amigaunix | amix)
++              basic_machine=m68k-unknown
++              os=-sysv4
++              ;;
++      apollo68)
++              basic_machine=m68k-apollo
++              os=-sysv
++              ;;
++      apollo68bsd)
++              basic_machine=m68k-apollo
++              os=-bsd
++              ;;
++      aros)
++              basic_machine=i386-pc
++              os=-aros
++              ;;
++      aux)
++              basic_machine=m68k-apple
++              os=-aux
++              ;;
++      balance)
++              basic_machine=ns32k-sequent
++              os=-dynix
++              ;;
++      blackfin)
++              basic_machine=bfin-unknown
++              os=-linux
++              ;;
++      blackfin-*)
++              basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
++              os=-linux
++              ;;
++      bluegene*)
++              basic_machine=powerpc-ibm
++              os=-cnk
++              ;;
++      c90)
++              basic_machine=c90-cray
++              os=-unicos
++              ;;
++        cegcc)
++              basic_machine=arm-unknown
++              os=-cegcc
++              ;;
++      convex-c1)
++              basic_machine=c1-convex
++              os=-bsd
++              ;;
++      convex-c2)
++              basic_machine=c2-convex
++              os=-bsd
++              ;;
++      convex-c32)
++              basic_machine=c32-convex
++              os=-bsd
++              ;;
++      convex-c34)
++              basic_machine=c34-convex
++              os=-bsd
++              ;;
++      convex-c38)
++              basic_machine=c38-convex
++              os=-bsd
++              ;;
++      cray | j90)
++              basic_machine=j90-cray
++              os=-unicos
++              ;;
++      craynv)
++              basic_machine=craynv-cray
++              os=-unicosmp
++              ;;
++      cr16)
++              basic_machine=cr16-unknown
++              os=-elf
++              ;;
++      crds | unos)
++              basic_machine=m68k-crds
++              ;;
++      crisv32 | crisv32-* | etraxfs*)
++              basic_machine=crisv32-axis
++              ;;
++      cris | cris-* | etrax*)
++              basic_machine=cris-axis
++              ;;
++      crx)
++              basic_machine=crx-unknown
++              os=-elf
++              ;;
++      da30 | da30-*)
++              basic_machine=m68k-da30
++              ;;
++      decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
++              basic_machine=mips-dec
++              ;;
++      decsystem10* | dec10*)
++              basic_machine=pdp10-dec
++              os=-tops10
++              ;;
++      decsystem20* | dec20*)
++              basic_machine=pdp10-dec
++              os=-tops20
++              ;;
++      delta | 3300 | motorola-3300 | motorola-delta \
++            | 3300-motorola | delta-motorola)
++              basic_machine=m68k-motorola
++              ;;
++      delta88)
++              basic_machine=m88k-motorola
++              os=-sysv3
++              ;;
++      dicos)
++              basic_machine=i686-pc
++              os=-dicos
++              ;;
++      djgpp)
++              basic_machine=i586-pc
++              os=-msdosdjgpp
++              ;;
++      dpx20 | dpx20-*)
++              basic_machine=rs6000-bull
++              os=-bosx
++              ;;
++      dpx2* | dpx2*-bull)
++              basic_machine=m68k-bull
++              os=-sysv3
++              ;;
++      ebmon29k)
++              basic_machine=a29k-amd
++              os=-ebmon
++              ;;
++      elxsi)
++              basic_machine=elxsi-elxsi
++              os=-bsd
++              ;;
++      encore | umax | mmax)
++              basic_machine=ns32k-encore
++              ;;
++      es1800 | OSE68k | ose68k | ose | OSE)
++              basic_machine=m68k-ericsson
++              os=-ose
++              ;;
++      fx2800)
++              basic_machine=i860-alliant
++              ;;
++      genix)
++              basic_machine=ns32k-ns
++              ;;
++      gmicro)
++              basic_machine=tron-gmicro
++              os=-sysv
++              ;;
++      go32)
++              basic_machine=i386-pc
++              os=-go32
++              ;;
++      h3050r* | hiux*)
++              basic_machine=hppa1.1-hitachi
++              os=-hiuxwe2
++              ;;
++      h8300hms)
++              basic_machine=h8300-hitachi
++              os=-hms
++              ;;
++      h8300xray)
++              basic_machine=h8300-hitachi
++              os=-xray
++              ;;
++      h8500hms)
++              basic_machine=h8500-hitachi
++              os=-hms
++              ;;
++      harris)
++              basic_machine=m88k-harris
++              os=-sysv3
++              ;;
++      hp300-*)
++              basic_machine=m68k-hp
++              ;;
++      hp300bsd)
++              basic_machine=m68k-hp
++              os=-bsd
++              ;;
++      hp300hpux)
++              basic_machine=m68k-hp
++              os=-hpux
++              ;;
++      hp3k9[0-9][0-9] | hp9[0-9][0-9])
++              basic_machine=hppa1.0-hp
++              ;;
++      hp9k2[0-9][0-9] | hp9k31[0-9])
++              basic_machine=m68000-hp
++              ;;
++      hp9k3[2-9][0-9])
++              basic_machine=m68k-hp
++              ;;
++      hp9k6[0-9][0-9] | hp6[0-9][0-9])
++              basic_machine=hppa1.0-hp
++              ;;
++      hp9k7[0-79][0-9] | hp7[0-79][0-9])
++              basic_machine=hppa1.1-hp
++              ;;
++      hp9k78[0-9] | hp78[0-9])
++              # FIXME: really hppa2.0-hp
++              basic_machine=hppa1.1-hp
++              ;;
++      hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
++              # FIXME: really hppa2.0-hp
++              basic_machine=hppa1.1-hp
++              ;;
++      hp9k8[0-9][13679] | hp8[0-9][13679])
++              basic_machine=hppa1.1-hp
++              ;;
++      hp9k8[0-9][0-9] | hp8[0-9][0-9])
++              basic_machine=hppa1.0-hp
++              ;;
++      hppa-next)
++              os=-nextstep3
++              ;;
++      hppaosf)
++              basic_machine=hppa1.1-hp
++              os=-osf
++              ;;
++      hppro)
++              basic_machine=hppa1.1-hp
++              os=-proelf
++              ;;
++      i370-ibm* | ibm*)
++              basic_machine=i370-ibm
++              ;;
++# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
++      i*86v32)
++              basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++              os=-sysv32
++              ;;
++      i*86v4*)
++              basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++              os=-sysv4
++              ;;
++      i*86v)
++              basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++              os=-sysv
++              ;;
++      i*86sol2)
++              basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++              os=-solaris2
++              ;;
++      i386mach)
++              basic_machine=i386-mach
++              os=-mach
++              ;;
++      i386-vsta | vsta)
++              basic_machine=i386-unknown
++              os=-vsta
++              ;;
++      iris | iris4d)
++              basic_machine=mips-sgi
++              case $os in
++                  -irix*)
++                      ;;
++                  *)
++                      os=-irix4
++                      ;;
++              esac
++              ;;
++      isi68 | isi)
++              basic_machine=m68k-isi
++              os=-sysv
++              ;;
++      m68knommu)
++              basic_machine=m68k-unknown
++              os=-linux
++              ;;
++      m68knommu-*)
++              basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
++              os=-linux
++              ;;
++      m88k-omron*)
++              basic_machine=m88k-omron
++              ;;
++      magnum | m3230)
++              basic_machine=mips-mips
++              os=-sysv
++              ;;
++      merlin)
++              basic_machine=ns32k-utek
++              os=-sysv
++              ;;
++        microblaze)
++              basic_machine=microblaze-xilinx
++              ;;
++      mingw32)
++              basic_machine=i386-pc
++              os=-mingw32
++              ;;
++      mingw32ce)
++              basic_machine=arm-unknown
++              os=-mingw32ce
++              ;;
++      miniframe)
++              basic_machine=m68000-convergent
++              ;;
++      *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
++              basic_machine=m68k-atari
++              os=-mint
++              ;;
++      mips3*-*)
++              basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
++              ;;
++      mips3*)
++              basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
++              ;;
++      monitor)
++              basic_machine=m68k-rom68k
++              os=-coff
++              ;;
++      morphos)
++              basic_machine=powerpc-unknown
++              os=-morphos
++              ;;
++      msdos)
++              basic_machine=i386-pc
++              os=-msdos
++              ;;
++      ms1-*)
++              basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++              ;;
++      mvs)
++              basic_machine=i370-ibm
++              os=-mvs
++              ;;
++      ncr3000)
++              basic_machine=i486-ncr
++              os=-sysv4
++              ;;
++      netbsd386)
++              basic_machine=i386-unknown
++              os=-netbsd
++              ;;
++      netwinder)
++              basic_machine=armv4l-rebel
++              os=-linux
++              ;;
++      news | news700 | news800 | news900)
++              basic_machine=m68k-sony
++              os=-newsos
++              ;;
++      news1000)
++              basic_machine=m68030-sony
++              os=-newsos
++              ;;
++      news-3600 | risc-news)
++              basic_machine=mips-sony
++              os=-newsos
++              ;;
++      necv70)
++              basic_machine=v70-nec
++              os=-sysv
++              ;;
++      next | m*-next )
++              basic_machine=m68k-next
++              case $os in
++                  -nextstep* )
++                      ;;
++                  -ns2*)
++                    os=-nextstep2
++                      ;;
++                  *)
++                    os=-nextstep3
++                      ;;
++              esac
++              ;;
++      nh3000)
++              basic_machine=m68k-harris
++              os=-cxux
++              ;;
++      nh[45]000)
++              basic_machine=m88k-harris
++              os=-cxux
++              ;;
++      nindy960)
++              basic_machine=i960-intel
++              os=-nindy
++              ;;
++      mon960)
++              basic_machine=i960-intel
++              os=-mon960
++              ;;
++      nonstopux)
++              basic_machine=mips-compaq
++              os=-nonstopux
++              ;;
++      np1)
++              basic_machine=np1-gould
++              ;;
++      nsr-tandem)
++              basic_machine=nsr-tandem
++              ;;
++      op50n-* | op60c-*)
++              basic_machine=hppa1.1-oki
++              os=-proelf
++              ;;
++      openrisc | openrisc-*)
++              basic_machine=or32-unknown
++              ;;
++      os400)
++              basic_machine=powerpc-ibm
++              os=-os400
++              ;;
++      OSE68000 | ose68000)
++              basic_machine=m68000-ericsson
++              os=-ose
++              ;;
++      os68k)
++              basic_machine=m68k-none
++              os=-os68k
++              ;;
++      pa-hitachi)
++              basic_machine=hppa1.1-hitachi
++              os=-hiuxwe2
++              ;;
++      paragon)
++              basic_machine=i860-intel
++              os=-osf
++              ;;
++      parisc)
++              basic_machine=hppa-unknown
++              os=-linux
++              ;;
++      parisc-*)
++              basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
++              os=-linux
++              ;;
++      pbd)
++              basic_machine=sparc-tti
++              ;;
++      pbb)
++              basic_machine=m68k-tti
++              ;;
++      pc532 | pc532-*)
++              basic_machine=ns32k-pc532
++              ;;
++      pc98)
++              basic_machine=i386-pc
++              ;;
++      pc98-*)
++              basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      pentium | p5 | k5 | k6 | nexgen | viac3)
++              basic_machine=i586-pc
++              ;;
++      pentiumpro | p6 | 6x86 | athlon | athlon_*)
++              basic_machine=i686-pc
++              ;;
++      pentiumii | pentium2 | pentiumiii | pentium3)
++              basic_machine=i686-pc
++              ;;
++      pentium4)
++              basic_machine=i786-pc
++              ;;
++      pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
++              basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      pentiumpro-* | p6-* | 6x86-* | athlon-*)
++              basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++              basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      pentium4-*)
++              basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      pn)
++              basic_machine=pn-gould
++              ;;
++      power)  basic_machine=power-ibm
++              ;;
++      ppc)    basic_machine=powerpc-unknown
++              ;;
++      ppc-*)  basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      ppcle | powerpclittle | ppc-le | powerpc-little)
++              basic_machine=powerpcle-unknown
++              ;;
++      ppcle-* | powerpclittle-*)
++              basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      ppc64)  basic_machine=powerpc64-unknown
++              ;;
++      ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++              basic_machine=powerpc64le-unknown
++              ;;
++      ppc64le-* | powerpc64little-*)
++              basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++              ;;
++      ps2)
++              basic_machine=i386-ibm
++              ;;
++      pw32)
++              basic_machine=i586-unknown
++              os=-pw32
++              ;;
++      rdos)
++              basic_machine=i386-pc
++              os=-rdos
++              ;;
++      rom68k)
++              basic_machine=m68k-rom68k
++              os=-coff
++              ;;
++      rm[46]00)
++              basic_machine=mips-siemens
++              ;;
++      rtpc | rtpc-*)
++              basic_machine=romp-ibm
++              ;;
++      s390 | s390-*)
++              basic_machine=s390-ibm
++              ;;
++      s390x | s390x-*)
++              basic_machine=s390x-ibm
++              ;;
++      sa29200)
++              basic_machine=a29k-amd
++              os=-udi
++              ;;
++      sb1)
++              basic_machine=mipsisa64sb1-unknown
++              ;;
++      sb1el)
++              basic_machine=mipsisa64sb1el-unknown
++              ;;
++      sde)
++              basic_machine=mipsisa32-sde
++              os=-elf
++              ;;
++      sei)
++              basic_machine=mips-sei
++              os=-seiux
++              ;;
++      sequent)
++              basic_machine=i386-sequent
++              ;;
++      sh)
++              basic_machine=sh-hitachi
++              os=-hms
++              ;;
++      sh5el)
++              basic_machine=sh5le-unknown
++              ;;
++      sh64)
++              basic_machine=sh64-unknown
++              ;;
++      sparclite-wrs | simso-wrs)
++              basic_machine=sparclite-wrs
++              os=-vxworks
++              ;;
++      sps7)
++              basic_machine=m68k-bull
++              os=-sysv2
++              ;;
++      spur)
++              basic_machine=spur-unknown
++              ;;
++      st2000)
++              basic_machine=m68k-tandem
++              ;;
++      stratus)
++              basic_machine=i860-stratus
++              os=-sysv4
++              ;;
++      sun2)
++              basic_machine=m68000-sun
++              ;;
++      sun2os3)
++              basic_machine=m68000-sun
++              os=-sunos3
++              ;;
++      sun2os4)
++              basic_machine=m68000-sun
++              os=-sunos4
++              ;;
++      sun3os3)
++              basic_machine=m68k-sun
++              os=-sunos3
++              ;;
++      sun3os4)
++              basic_machine=m68k-sun
++              os=-sunos4
++              ;;
++      sun4os3)
++              basic_machine=sparc-sun
++              os=-sunos3
++              ;;
++      sun4os4)
++              basic_machine=sparc-sun
++              os=-sunos4
++              ;;
++      sun4sol2)
++              basic_machine=sparc-sun
++              os=-solaris2
++              ;;
++      sun3 | sun3-*)
++              basic_machine=m68k-sun
++              ;;
++      sun4)
++              basic_machine=sparc-sun
++              ;;
++      sun386 | sun386i | roadrunner)
++              basic_machine=i386-sun
++              ;;
++      sv1)
++              basic_machine=sv1-cray
++              os=-unicos
++              ;;
++      symmetry)
++              basic_machine=i386-sequent
++              os=-dynix
++              ;;
++      t3e)
++              basic_machine=alphaev5-cray
++              os=-unicos
++              ;;
++      t90)
++              basic_machine=t90-cray
++              os=-unicos
++              ;;
++      tic54x | c54x*)
++              basic_machine=tic54x-unknown
++              os=-coff
++              ;;
++      tic55x | c55x*)
++              basic_machine=tic55x-unknown
++              os=-coff
++              ;;
++      tic6x | c6x*)
++              basic_machine=tic6x-unknown
++              os=-coff
++              ;;
++        # This must be matched before tile*.
++        tilegx*)
++              basic_machine=tilegx-unknown
++              os=-linux-gnu
++              ;;
++      tile*)
++              basic_machine=tile-unknown
++              os=-linux-gnu
++              ;;
++      tx39)
++              basic_machine=mipstx39-unknown
++              ;;
++      tx39el)
++              basic_machine=mipstx39el-unknown
++              ;;
++      toad1)
++              basic_machine=pdp10-xkl
++              os=-tops20
++              ;;
++      tower | tower-32)
++              basic_machine=m68k-ncr
++              ;;
++      tpf)
++              basic_machine=s390x-ibm
++              os=-tpf
++              ;;
++      udi29k)
++              basic_machine=a29k-amd
++              os=-udi
++              ;;
++      ultra3)
++              basic_machine=a29k-nyu
++              os=-sym1
++              ;;
++      v810 | necv810)
++              basic_machine=v810-nec
++              os=-none
++              ;;
++      vaxv)
++              basic_machine=vax-dec
++              os=-sysv
++              ;;
++      vms)
++              basic_machine=vax-dec
++              os=-vms
++              ;;
++      vpp*|vx|vx-*)
++              basic_machine=f301-fujitsu
++              ;;
++      vxworks960)
++              basic_machine=i960-wrs
++              os=-vxworks
++              ;;
++      vxworks68)
++              basic_machine=m68k-wrs
++              os=-vxworks
++              ;;
++      vxworks29k)
++              basic_machine=a29k-wrs
++              os=-vxworks
++              ;;
++      w65*)
++              basic_machine=w65-wdc
++              os=-none
++              ;;
++      w89k-*)
++              basic_machine=hppa1.1-winbond
++              os=-proelf
++              ;;
++      xbox)
++              basic_machine=i686-pc
++              os=-mingw32
++              ;;
++      xps | xps100)
++              basic_machine=xps100-honeywell
++              ;;
++      ymp)
++              basic_machine=ymp-cray
++              os=-unicos
++              ;;
++      z8k-*-coff)
++              basic_machine=z8k-unknown
++              os=-sim
++              ;;
++      z80-*-coff)
++              basic_machine=z80-unknown
++              os=-sim
++              ;;
++      none)
++              basic_machine=none-none
++              os=-none
++              ;;
++
++# Here we handle the default manufacturer of certain CPU types.  It is in
++# some cases the only manufacturer, in others, it is the most popular.
++      w89k)
++              basic_machine=hppa1.1-winbond
++              ;;
++      op50n)
++              basic_machine=hppa1.1-oki
++              ;;
++      op60c)
++              basic_machine=hppa1.1-oki
++              ;;
++      romp)
++              basic_machine=romp-ibm
++              ;;
++      mmix)
++              basic_machine=mmix-knuth
++              ;;
++      rs6000)
++              basic_machine=rs6000-ibm
++              ;;
++      vax)
++              basic_machine=vax-dec
++              ;;
++      pdp10)
++              # there are many clones, so DEC is not a safe bet
++              basic_machine=pdp10-unknown
++              ;;
++      pdp11)
++              basic_machine=pdp11-dec
++              ;;
++      we32k)
++              basic_machine=we32k-att
++              ;;
++      sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
++              basic_machine=sh-unknown
++              ;;
++      sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
++              basic_machine=sparc-sun
++              ;;
++      cydra)
++              basic_machine=cydra-cydrome
++              ;;
++      orion)
++              basic_machine=orion-highlevel
++              ;;
++      orion105)
++              basic_machine=clipper-highlevel
++              ;;
++      mac | mpw | mac-mpw)
++              basic_machine=m68k-apple
++              ;;
++      pmac | pmac-mpw)
++              basic_machine=powerpc-apple
++              ;;
++      *-unknown)
++              # Make sure to match an already-canonicalized machine name.
++              ;;
++      *)
++              echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++              exit 1
++              ;;
++esac
++
++# Here we canonicalize certain aliases for manufacturers.
++case $basic_machine in
++      *-digital*)
++              basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
++              ;;
++      *-commodore*)
++              basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
++              ;;
++      *)
++              ;;
++esac
++
++# Decode manufacturer-specific aliases for certain operating systems.
++
++if [ x"$os" != x"" ]
++then
++case $os in
++        # First match some system type aliases
++        # that might get confused with valid system types.
++      # -solaris* is a basic system type, with this one exception.
++        -auroraux)
++              os=-auroraux
++              ;;
++      -solaris1 | -solaris1.*)
++              os=`echo $os | sed -e 's|solaris1|sunos4|'`
++              ;;
++      -solaris)
++              os=-solaris2
++              ;;
++      -svr4*)
++              os=-sysv4
++              ;;
++      -unixware*)
++              os=-sysv4.2uw
++              ;;
++      -gnu/linux*)
++              os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
++              ;;
++      # First accept the basic system types.
++      # The portable systems comes first.
++      # Each alternative MUST END IN A *, to match a version number.
++      # -sysv* is not here because it comes later, after sysvr4.
++      -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
++            | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
++            | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
++            | -sym* | -kopensolaris* \
++            | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
++            | -aos* | -aros* \
++            | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
++            | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
++            | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++            | -openbsd* | -solidbsd* \
++            | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++            | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++            | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
++            | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++            | -chorusos* | -chorusrdb* | -cegcc* \
++            | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
++            | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
++            | -uxpv* | -beos* | -mpeix* | -udk* \
++            | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
++            | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
++            | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++            | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++            | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++            | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++            | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
++      # Remember, each alternative MUST END IN *, to match a version number.
++              ;;
++      -qnx*)
++              case $basic_machine in
++                  x86-* | i*86-*)
++                      ;;
++                  *)
++                      os=-nto$os
++                      ;;
++              esac
++              ;;
++      -nto-qnx*)
++              ;;
++      -nto*)
++              os=`echo $os | sed -e 's|nto|nto-qnx|'`
++              ;;
++      -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
++            | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
++            | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
++              ;;
++      -mac*)
++              os=`echo $os | sed -e 's|mac|macos|'`
++              ;;
++      -linux-dietlibc)
++              os=-linux-dietlibc
++              ;;
++      -linux*)
++              os=`echo $os | sed -e 's|linux|linux-gnu|'`
++              ;;
++      -sunos5*)
++              os=`echo $os | sed -e 's|sunos5|solaris2|'`
++              ;;
++      -sunos6*)
++              os=`echo $os | sed -e 's|sunos6|solaris3|'`
++              ;;
++      -opened*)
++              os=-openedition
++              ;;
++        -os400*)
++              os=-os400
++              ;;
++      -wince*)
++              os=-wince
++              ;;
++      -osfrose*)
++              os=-osfrose
++              ;;
++      -osf*)
++              os=-osf
++              ;;
++      -utek*)
++              os=-bsd
++              ;;
++      -dynix*)
++              os=-bsd
++              ;;
++      -acis*)
++              os=-aos
++              ;;
++      -atheos*)
++              os=-atheos
++              ;;
++      -syllable*)
++              os=-syllable
++              ;;
++      -386bsd)
++              os=-bsd
++              ;;
++      -ctix* | -uts*)
++              os=-sysv
++              ;;
++      -nova*)
++              os=-rtmk-nova
++              ;;
++      -ns2 )
++              os=-nextstep2
++              ;;
++      -nsk*)
++              os=-nsk
++              ;;
++      # Preserve the version number of sinix5.
++      -sinix5.*)
++              os=`echo $os | sed -e 's|sinix|sysv|'`
++              ;;
++      -sinix*)
++              os=-sysv4
++              ;;
++        -tpf*)
++              os=-tpf
++              ;;
++      -triton*)
++              os=-sysv3
++              ;;
++      -oss*)
++              os=-sysv3
++              ;;
++      -svr4)
++              os=-sysv4
++              ;;
++      -svr3)
++              os=-sysv3
++              ;;
++      -sysvr4)
++              os=-sysv4
++              ;;
++      # This must come after -sysvr4.
++      -sysv*)
++              ;;
++      -ose*)
++              os=-ose
++              ;;
++      -es1800*)
++              os=-ose
++              ;;
++      -xenix)
++              os=-xenix
++              ;;
++      -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++              os=-mint
++              ;;
++      -aros*)
++              os=-aros
++              ;;
++      -kaos*)
++              os=-kaos
++              ;;
++      -zvmoe)
++              os=-zvmoe
++              ;;
++      -dicos*)
++              os=-dicos
++              ;;
++        -nacl*)
++              ;;
++      -none)
++              ;;
++      *)
++              # Get rid of the `-' at the beginning of $os.
++              os=`echo $os | sed 's/[^-]*-//'`
++              echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
++              exit 1
++              ;;
++esac
++else
++
++# Here we handle the default operating systems that come with various machines.
++# The value should be what the vendor currently ships out the door with their
++# machine or put another way, the most popular os provided with the machine.
++
++# Note that if you're going to try to match "-MANUFACTURER" here (say,
++# "-sun"), then you have to tell the case statement up towards the top
++# that MANUFACTURER isn't an operating system.  Otherwise, code above
++# will signal an error saying that MANUFACTURER isn't an operating
++# system, and we'll never get to this point.
++
++case $basic_machine in
++        score-*)
++              os=-elf
++              ;;
++        spu-*)
++              os=-elf
++              ;;
++      *-acorn)
++              os=-riscix1.2
++              ;;
++      arm*-rebel)
++              os=-linux
++              ;;
++      arm*-semi)
++              os=-aout
++              ;;
++        c4x-* | tic4x-*)
++              os=-coff
++              ;;
++      # This must come before the *-dec entry.
++      pdp10-*)
++              os=-tops20
++              ;;
++      pdp11-*)
++              os=-none
++              ;;
++      *-dec | vax-*)
++              os=-ultrix4.2
++              ;;
++      m68*-apollo)
++              os=-domain
++              ;;
++      i386-sun)
++              os=-sunos4.0.2
++              ;;
++      m68000-sun)
++              os=-sunos3
++              # This also exists in the configure program, but was not the
++              # default.
++              # os=-sunos4
++              ;;
++      m68*-cisco)
++              os=-aout
++              ;;
++        mep-*)
++              os=-elf
++              ;;
++      mips*-cisco)
++              os=-elf
++              ;;
++      mips*-*)
++              os=-elf
++              ;;
++      or32-*)
++              os=-coff
++              ;;
++      *-tti)  # must be before sparc entry or we get the wrong os.
++              os=-sysv3
++              ;;
++      sparc-* | *-sun)
++              os=-sunos4.1.1
++              ;;
++      *-be)
++              os=-beos
++              ;;
++      *-haiku)
++              os=-haiku
++              ;;
++      *-ibm)
++              os=-aix
++              ;;
++      *-knuth)
++              os=-mmixware
++              ;;
++      *-wec)
++              os=-proelf
++              ;;
++      *-winbond)
++              os=-proelf
++              ;;
++      *-oki)
++              os=-proelf
++              ;;
++      *-hp)
++              os=-hpux
++              ;;
++      *-hitachi)
++              os=-hiux
++              ;;
++      i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
++              os=-sysv
++              ;;
++      *-cbm)
++              os=-amigaos
++              ;;
++      *-dg)
++              os=-dgux
++              ;;
++      *-dolphin)
++              os=-sysv3
++              ;;
++      m68k-ccur)
++              os=-rtu
++              ;;
++      m88k-omron*)
++              os=-luna
++              ;;
++      *-next )
++              os=-nextstep
++              ;;
++      *-sequent)
++              os=-ptx
++              ;;
++      *-crds)
++              os=-unos
++              ;;
++      *-ns)
++              os=-genix
++              ;;
++      i370-*)
++              os=-mvs
++              ;;
++      *-next)
++              os=-nextstep3
++              ;;
++      *-gould)
++              os=-sysv
++              ;;
++      *-highlevel)
++              os=-bsd
++              ;;
++      *-encore)
++              os=-bsd
++              ;;
++      *-sgi)
++              os=-irix
++              ;;
++      *-siemens)
++              os=-sysv4
++              ;;
++      *-masscomp)
++              os=-rtu
++              ;;
++      f30[01]-fujitsu | f700-fujitsu)
++              os=-uxpv
++              ;;
++      *-rom68k)
++              os=-coff
++              ;;
++      *-*bug)
++              os=-coff
++              ;;
++      *-apple)
++              os=-macos
++              ;;
++      *-atari*)
++              os=-mint
++              ;;
++      *)
++              os=-none
++              ;;
++esac
++fi
++
++# Here we handle the case where we know the os, and the CPU type, but not the
++# manufacturer.  We pick the logical manufacturer.
++vendor=unknown
++case $basic_machine in
++      *-unknown)
++              case $os in
++                      -riscix*)
++                              vendor=acorn
++                              ;;
++                      -sunos*)
++                              vendor=sun
++                              ;;
++                      -cnk*|-aix*)
++                              vendor=ibm
++                              ;;
++                      -beos*)
++                              vendor=be
++                              ;;
++                      -hpux*)
++                              vendor=hp
++                              ;;
++                      -mpeix*)
++                              vendor=hp
++                              ;;
++                      -hiux*)
++                              vendor=hitachi
++                              ;;
++                      -unos*)
++                              vendor=crds
++                              ;;
++                      -dgux*)
++                              vendor=dg
++                              ;;
++                      -luna*)
++                              vendor=omron
++                              ;;
++                      -genix*)
++                              vendor=ns
++                              ;;
++                      -mvs* | -opened*)
++                              vendor=ibm
++                              ;;
++                      -os400*)
++                              vendor=ibm
++                              ;;
++                      -ptx*)
++                              vendor=sequent
++                              ;;
++                      -tpf*)
++                              vendor=ibm
++                              ;;
++                      -vxsim* | -vxworks* | -windiss*)
++                              vendor=wrs
++                              ;;
++                      -aux*)
++                              vendor=apple
++                              ;;
++                      -hms*)
++                              vendor=hitachi
++                              ;;
++                      -mpw* | -macos*)
++                              vendor=apple
++                              ;;
++                      -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++                              vendor=atari
++                              ;;
++                      -vos*)
++                              vendor=stratus
++                              ;;
++              esac
++              basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
++              ;;
++esac
++
++echo $basic_machine$os
++exit
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:

diff --cc build-aux/depcomp
index df8eea7,0000000..df8eea7
mode 100755,000000..100755
--- 1/depcomp
--- /dev/null
+++ b/build-aux/depcomp

diff --cc build-aux/install-sh
index 0000000,0000000..6781b98
new file mode 100755 (executable)
--- /dev/null
--- /dev/null
+++ b/build-aux/install-sh
@@@ -1,0 -1,0 +1,520 @@@
++#!/bin/sh
++# install - install a program, script, or datafile
++
++scriptversion=2009-04-28.21; # UTC
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
++#
++# Copyright (C) 1994 X Consortium
++#
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
++#
++# Calling this script install-sh is preferred over install.sh, to prevent
++# `make' implicit rules from creating a file called install from it
++# when there is no Makefile.
++#
++# This script is compatible with the BSD install script, but was written
++# from scratch.
++
++nl='
++'
++IFS=" ""      $nl"
++
++# set DOITPROG to echo to test this script
++
++# Don't use :- since 4.3BSD and earlier shells don't like it.
++doit=${DOITPROG-}
++if test -z "$doit"; then
++  doit_exec=exec
++else
++  doit_exec=$doit
++fi
++
++# Put in absolute file names if you don't have them in your path;
++# or use environment vars.
++
++chgrpprog=${CHGRPPROG-chgrp}
++chmodprog=${CHMODPROG-chmod}
++chownprog=${CHOWNPROG-chown}
++cmpprog=${CMPPROG-cmp}
++cpprog=${CPPROG-cp}
++mkdirprog=${MKDIRPROG-mkdir}
++mvprog=${MVPROG-mv}
++rmprog=${RMPROG-rm}
++stripprog=${STRIPPROG-strip}
++
++posix_glob='?'
++initialize_posix_glob='
++  test "$posix_glob" != "?" || {
++    if (set -f) 2>/dev/null; then
++      posix_glob=
++    else
++      posix_glob=:
++    fi
++  }
++'
++
++posix_mkdir=
++
++# Desired mode of installed file.
++mode=0755
++
++chgrpcmd=
++chmodcmd=$chmodprog
++chowncmd=
++mvcmd=$mvprog
++rmcmd="$rmprog -f"
++stripcmd=
++
++src=
++dst=
++dir_arg=
++dst_arg=
++
++copy_on_change=false
++no_target_directory=
++
++usage="\
++Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
++   or: $0 [OPTION]... SRCFILES... DIRECTORY
++   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
++   or: $0 [OPTION]... -d DIRECTORIES...
++
++In the 1st form, copy SRCFILE to DSTFILE.
++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
++In the 4th, create DIRECTORIES.
++
++Options:
++     --help     display this help and exit.
++     --version  display version info and exit.
++
++  -c            (ignored)
++  -C            install only if different (preserve the last data modification time)
++  -d            create directories instead of installing files.
++  -g GROUP      $chgrpprog installed files to GROUP.
++  -m MODE       $chmodprog installed files to MODE.
++  -o USER       $chownprog installed files to USER.
++  -s            $stripprog installed files.
++  -t DIRECTORY  install into DIRECTORY.
++  -T            report an error if DSTFILE is a directory.
++
++Environment variables override the default commands:
++  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
++  RMPROG STRIPPROG
++"
++
++while test $# -ne 0; do
++  case $1 in
++    -c) ;;
++
++    -C) copy_on_change=true;;
++
++    -d) dir_arg=true;;
++
++    -g) chgrpcmd="$chgrpprog $2"
++      shift;;
++
++    --help) echo "$usage"; exit $?;;
++
++    -m) mode=$2
++      case $mode in
++        *' '* | *'    '* | *'
++'*      | *'*'* | *'?'* | *'['*)
++          echo "$0: invalid mode: $mode" >&2
++          exit 1;;
++      esac
++      shift;;
++
++    -o) chowncmd="$chownprog $2"
++      shift;;
++
++    -s) stripcmd=$stripprog;;
++
++    -t) dst_arg=$2
++      shift;;
++
++    -T) no_target_directory=true;;
++
++    --version) echo "$0 $scriptversion"; exit $?;;
++
++    --)       shift
++      break;;
++
++    -*)       echo "$0: invalid option: $1" >&2
++      exit 1;;
++
++    *)  break;;
++  esac
++  shift
++done
++
++if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
++  # When -d is used, all remaining arguments are directories to create.
++  # When -t is used, the destination is already specified.
++  # Otherwise, the last argument is the destination.  Remove it from $@.
++  for arg
++  do
++    if test -n "$dst_arg"; then
++      # $@ is not empty: it contains at least $arg.
++      set fnord "$@" "$dst_arg"
++      shift # fnord
++    fi
++    shift # arg
++    dst_arg=$arg
++  done
++fi
++
++if test $# -eq 0; then
++  if test -z "$dir_arg"; then
++    echo "$0: no input file specified." >&2
++    exit 1
++  fi
++  # It's OK to call `install-sh -d' without argument.
++  # This can happen when creating conditional directories.
++  exit 0
++fi
++
++if test -z "$dir_arg"; then
++  trap '(exit $?); exit' 1 2 13 15
++
++  # Set umask so as not to create temps with too-generous modes.
++  # However, 'strip' requires both read and write access to temps.
++  case $mode in
++    # Optimize common cases.
++    *644) cp_umask=133;;
++    *755) cp_umask=22;;
++
++    *[0-7])
++      if test -z "$stripcmd"; then
++      u_plus_rw=
++      else
++      u_plus_rw='% 200'
++      fi
++      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
++    *)
++      if test -z "$stripcmd"; then
++      u_plus_rw=
++      else
++      u_plus_rw=,u+rw
++      fi
++      cp_umask=$mode$u_plus_rw;;
++  esac
++fi
++
++for src
++do
++  # Protect names starting with `-'.
++  case $src in
++    -*) src=./$src;;
++  esac
++
++  if test -n "$dir_arg"; then
++    dst=$src
++    dstdir=$dst
++    test -d "$dstdir"
++    dstdir_status=$?
++  else
++
++    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
++    # might cause directories to be created, which would be especially bad
++    # if $src (and thus $dsttmp) contains '*'.
++    if test ! -f "$src" && test ! -d "$src"; then
++      echo "$0: $src does not exist." >&2
++      exit 1
++    fi
++
++    if test -z "$dst_arg"; then
++      echo "$0: no destination specified." >&2
++      exit 1
++    fi
++
++    dst=$dst_arg
++    # Protect names starting with `-'.
++    case $dst in
++      -*) dst=./$dst;;
++    esac
++
++    # If destination is a directory, append the input filename; won't work
++    # if double slashes aren't ignored.
++    if test -d "$dst"; then
++      if test -n "$no_target_directory"; then
++      echo "$0: $dst_arg: Is a directory" >&2
++      exit 1
++      fi
++      dstdir=$dst
++      dst=$dstdir/`basename "$src"`
++      dstdir_status=0
++    else
++      # Prefer dirname, but fall back on a substitute if dirname fails.
++      dstdir=`
++      (dirname "$dst") 2>/dev/null ||
++      expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++           X"$dst" : 'X\(//\)[^/]' \| \
++           X"$dst" : 'X\(//\)$' \| \
++           X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
++      echo X"$dst" |
++          sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
++                 s//\1/
++                 q
++               }
++               /^X\(\/\/\)[^/].*/{
++                 s//\1/
++                 q
++               }
++               /^X\(\/\/\)$/{
++                 s//\1/
++                 q
++               }
++               /^X\(\/\).*/{
++                 s//\1/
++                 q
++               }
++               s/.*/./; q'
++      `
++
++      test -d "$dstdir"
++      dstdir_status=$?
++    fi
++  fi
++
++  obsolete_mkdir_used=false
++
++  if test $dstdir_status != 0; then
++    case $posix_mkdir in
++      '')
++      # Create intermediate dirs using mode 755 as modified by the umask.
++      # This is like FreeBSD 'install' as of 1997-10-28.
++      umask=`umask`
++      case $stripcmd.$umask in
++        # Optimize common cases.
++        *[2367][2367]) mkdir_umask=$umask;;
++        .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
++
++        *[0-7])
++          mkdir_umask=`expr $umask + 22 \
++            - $umask % 100 % 40 + $umask % 20 \
++            - $umask % 10 % 4 + $umask % 2
++          `;;
++        *) mkdir_umask=$umask,go-w;;
++      esac
++
++      # With -d, create the new directory with the user-specified mode.
++      # Otherwise, rely on $mkdir_umask.
++      if test -n "$dir_arg"; then
++        mkdir_mode=-m$mode
++      else
++        mkdir_mode=
++      fi
++
++      posix_mkdir=false
++      case $umask in
++        *[123567][0-7][0-7])
++          # POSIX mkdir -p sets u+wx bits regardless of umask, which
++          # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
++          ;;
++        *)
++          tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
++          trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
++
++          if (umask $mkdir_umask &&
++              exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
++          then
++            if test -z "$dir_arg" || {
++                 # Check for POSIX incompatibilities with -m.
++                 # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
++                 # other-writeable bit of parent directory when it shouldn't.
++                 # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
++                 ls_ld_tmpdir=`ls -ld "$tmpdir"`
++                 case $ls_ld_tmpdir in
++                   d????-?r-*) different_mode=700;;
++                   d????-?--*) different_mode=755;;
++                   *) false;;
++                 esac &&
++                 $mkdirprog -m$different_mode -p -- "$tmpdir" && {
++                   ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
++                   test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
++                 }
++               }
++            then posix_mkdir=:
++            fi
++            rmdir "$tmpdir/d" "$tmpdir"
++          else
++            # Remove any dirs left behind by ancient mkdir implementations.
++            rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
++          fi
++          trap '' 0;;
++      esac;;
++    esac
++
++    if
++      $posix_mkdir && (
++      umask $mkdir_umask &&
++      $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
++      )
++    then :
++    else
++
++      # The umask is ridiculous, or mkdir does not conform to POSIX,
++      # or it failed possibly due to a race condition.  Create the
++      # directory the slow way, step by step, checking for races as we go.
++
++      case $dstdir in
++      /*) prefix='/';;
++      -*) prefix='./';;
++      *)  prefix='';;
++      esac
++
++      eval "$initialize_posix_glob"
++
++      oIFS=$IFS
++      IFS=/
++      $posix_glob set -f
++      set fnord $dstdir
++      shift
++      $posix_glob set +f
++      IFS=$oIFS
++
++      prefixes=
++
++      for d
++      do
++      test -z "$d" && continue
++
++      prefix=$prefix$d
++      if test -d "$prefix"; then
++        prefixes=
++      else
++        if $posix_mkdir; then
++          (umask=$mkdir_umask &&
++           $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
++          # Don't fail if two instances are running concurrently.
++          test -d "$prefix" || exit 1
++        else
++          case $prefix in
++            *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
++            *) qprefix=$prefix;;
++          esac
++          prefixes="$prefixes '$qprefix'"
++        fi
++      fi
++      prefix=$prefix/
++      done
++
++      if test -n "$prefixes"; then
++      # Don't fail if two instances are running concurrently.
++      (umask $mkdir_umask &&
++       eval "\$doit_exec \$mkdirprog $prefixes") ||
++        test -d "$dstdir" || exit 1
++      obsolete_mkdir_used=true
++      fi
++    fi
++  fi
++
++  if test -n "$dir_arg"; then
++    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
++    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
++    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
++      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
++  else
++
++    # Make a couple of temp file names in the proper directory.
++    dsttmp=$dstdir/_inst.$$_
++    rmtmp=$dstdir/_rm.$$_
++
++    # Trap to clean up those temp files at exit.
++    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
++
++    # Copy the file name to the temp name.
++    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
++
++    # and set any options; do chmod last to preserve setuid bits.
++    #
++    # If any of these fail, we abort the whole thing.  If we want to
++    # ignore errors from any of these, just make sure not to ignore
++    # errors from the above "$doit $cpprog $src $dsttmp" command.
++    #
++    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
++    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
++    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
++    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
++
++    # If -C, don't bother to copy if it wouldn't change the file.
++    if $copy_on_change &&
++       old=`LC_ALL=C ls -dlL "$dst"   2>/dev/null` &&
++       new=`LC_ALL=C ls -dlL "$dsttmp"        2>/dev/null` &&
++
++       eval "$initialize_posix_glob" &&
++       $posix_glob set -f &&
++       set X $old && old=:$2:$4:$5:$6 &&
++       set X $new && new=:$2:$4:$5:$6 &&
++       $posix_glob set +f &&
++
++       test "$old" = "$new" &&
++       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
++    then
++      rm -f "$dsttmp"
++    else
++      # Rename the file to the real destination.
++      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
++
++      # The rename failed, perhaps because mv can't rename something else
++      # to itself, or perhaps because mv is so ancient that it does not
++      # support -f.
++      {
++      # Now remove or move aside any old file at destination location.
++      # We try this two ways since rm can't unlink itself on some
++      # systems and the destination file might be busy for other
++      # reasons.  In this case, the final cleanup might fail but the new
++      # file should still install successfully.
++      {
++        test ! -f "$dst" ||
++        $doit $rmcmd -f "$dst" 2>/dev/null ||
++        { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
++          { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
++        } ||
++        { echo "$0: cannot unlink or rename $dst" >&2
++          (exit 1); exit 1
++        }
++      } &&
++
++      # Now rename the file to the real destination.
++      $doit $mvcmd "$dsttmp" "$dst"
++      }
++    fi || exit 1
++
++    trap '' 0
++  fi
++done
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-time-zone: "UTC"
++# time-stamp-end: "; # UTC"
++# End:

diff --cc build-aux/ltmain.sh
index d88da2c,0000000..d88da2c
mode 100755,000000..100755
--- 1/ltmain.sh
--- /dev/null
+++ b/build-aux/ltmain.sh

diff --cc build-aux/missing
index 28055d2,0000000..28055d2
mode 100755,000000..100755
--- 1/missing
--- /dev/null
+++ b/build-aux/missing

diff --cc config.h.in
index ef6608e,0000000..9058ff6
mode 100644,000000..100644
--- 1/config.h.in
--- /dev/null
+++ b/config.h.in
@@@ -1,106 -1,0 +1,133 @@@
 +/* config.h.in.  Generated from configure.ac by autoheader.  */
 +
 +/* Define to 1 if you have the <dlfcn.h> header file. */
 +#undef HAVE_DLFCN_H
 +
 +/* Define if GSS-API library supports recent naming extensions draft */
 +#undef HAVE_GSS_C_NT_COMPOSITE_EXPORT
 +
 +/* Define if GSS-API library supports RFC 5587 */
 +#undef HAVE_GSS_INQUIRE_ATTRS_FOR_MECH
 +
 +/* Define if GSS-API library supports gss_krb5_import_cred */
 +#undef HAVE_GSS_KRB5_IMPORT_CRED
 +
 +/* Define if building against Heimdal Kerberos implementation */
 +#undef HAVE_HEIMDAL_VERSION
 +
 +/* Define to 1 if you have the <inttypes.h> header file. */
 +#undef HAVE_INTTYPES_H
 +
 +/* Define to 1 if you have the <memory.h> header file. */
 +#undef HAVE_MEMORY_H
 +
++/* Define if Moonshot identity selector is available */
++#undef HAVE_MOONSHOT_GET_IDENTITY
++
++/* Define is OpenSAML is available */
++#undef HAVE_OPENSAML
++
++/* Define is Shibboleth resolver is available */
++#undef HAVE_SHIBRESOLVER
++
++/* Define is Shibboleth SP is available */
++#undef HAVE_SHIBSP
++
++/* Define to 1 if you have the <stdarg.h> header file. */
++#undef HAVE_STDARG_H
++
 +/* Define to 1 if you have the <stdint.h> header file. */
 +#undef HAVE_STDINT_H
 +
++/* Define to 1 if you have the <stdio.h> header file. */
++#undef HAVE_STDIO_H
++
 +/* Define to 1 if you have the <stdlib.h> header file. */
 +#undef HAVE_STDLIB_H
 +
 +/* Define to 1 if you have the <strings.h> header file. */
 +#undef HAVE_STRINGS_H
 +
 +/* Define to 1 if you have the <string.h> header file. */
 +#undef HAVE_STRING_H
 +
++/* Define to 1 if you have the <sys/param.h> header file. */
++#undef HAVE_SYS_PARAM_H
++
 +/* Define to 1 if you have the <sys/stat.h> header file. */
 +#undef HAVE_SYS_STAT_H
 +
 +/* Define to 1 if you have the <sys/types.h> header file. */
 +#undef HAVE_SYS_TYPES_H
 +
 +/* Define to 1 if you have the <unistd.h> header file. */
 +#undef HAVE_UNISTD_H
 +
++/* Define to 1 if you have the `vasprintf' function. */
++#undef HAVE_VASPRINTF
++
 +/* Define to the sub-directory in which libtool stores uninstalled libraries.
 +   */
 +#undef LT_OBJDIR
 +
++/* Define to 1 if your C compiler doesn't accept -c and -o together. */
++#undef NO_MINUS_C_MINUS_O
++
 +/* Name of package */
 +#undef PACKAGE
 +
 +/* Define to the address where bug reports for this package should be sent. */
 +#undef PACKAGE_BUGREPORT
 +
 +/* Define to the full name of this package. */
 +#undef PACKAGE_NAME
 +
 +/* Define to the full name and version of this package. */
 +#undef PACKAGE_STRING
 +
 +/* Define to the one symbol short name of this package. */
 +#undef PACKAGE_TARNAME
 +
 +/* Define to the home page for this package. */
 +#undef PACKAGE_URL
 +
 +/* Define to the version of this package. */
 +#undef PACKAGE_VERSION
 +
 +/* Define to 1 if you have the ANSI C header files. */
 +#undef STDC_HEADERS
 +
 +/* Enable extensions on AIX 3, Interix.  */
 +#ifndef _ALL_SOURCE
 +# undef _ALL_SOURCE
 +#endif
 +/* Enable GNU extensions on systems that have them.  */
 +#ifndef _GNU_SOURCE
 +# undef _GNU_SOURCE
 +#endif
 +/* Enable threading extensions on Solaris.  */
 +#ifndef _POSIX_PTHREAD_SEMANTICS
 +# undef _POSIX_PTHREAD_SEMANTICS
 +#endif
 +/* Enable extensions on HP NonStop.  */
 +#ifndef _TANDEM_SOURCE
 +# undef _TANDEM_SOURCE
 +#endif
 +/* Enable general extensions on Solaris.  */
 +#ifndef __EXTENSIONS__
 +# undef __EXTENSIONS__
 +#endif
 +
 +
 +/* Version number of package */
 +#undef VERSION
 +
 +/* Define to 1 if on MINIX. */
 +#undef _MINIX
 +
 +/* Define to 2 if the system does not provide POSIX.1 features except with
 +   this defined. */
 +#undef _POSIX_1_SOURCE
 +
 +/* Define to 1 if you need to in order for `stat' and other things to work. */
 +#undef _POSIX_SOURCE

diff --cc configure
index bd6d0e3,0000000..1a396a0
mode 100755,000000..100755
--- 1/configure
--- /dev/null
+++ b/configure
@@@ -1,18112 -1,0 +1,18274 @@@
- LIBOBJS
 +#! /bin/sh
 +# Guess values for system-dependent variables and create Makefiles.
 +# Generated by GNU Autoconf 2.67 for mech_eap 0.1.
 +#
 +# Report bugs to <bugs@project-moonshot.org>.
 +#
 +#
 +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
 +# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
 +# Foundation, Inc.
 +#
 +#
 +# This configure script is free software; the Free Software Foundation
 +# gives unlimited permission to copy, distribute and modify it.
 +## -------------------- ##
 +## M4sh Initialization. ##
 +## -------------------- ##
 +
 +# Be more Bourne compatible
 +DUALCASE=1; export DUALCASE # for MKS sh
 +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
 +  emulate sh
 +  NULLCMD=:
 +  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
 +  # is contrary to our usage.  Disable this feature.
 +  alias -g '${1+"$@"}'='"$@"'
 +  setopt NO_GLOB_SUBST
 +else
 +  case `(set -o) 2>/dev/null` in #(
 +  *posix*) :
 +    set -o posix ;; #(
 +  *) :
 +     ;;
 +esac
 +fi
 +
 +
 +as_nl='
 +'
 +export as_nl
 +# Printing a long string crashes Solaris 7 /usr/bin/printf.
 +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
 +# Prefer a ksh shell builtin over an external printf program on Solaris,
 +# but without wasting forks for bash or zsh.
 +if test -z "$BASH_VERSION$ZSH_VERSION" \
 +    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
 +  as_echo='print -r --'
 +  as_echo_n='print -rn --'
 +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
 +  as_echo='printf %s\n'
 +  as_echo_n='printf %s'
 +else
 +  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
 +    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
 +    as_echo_n='/usr/ucb/echo -n'
 +  else
 +    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
 +    as_echo_n_body='eval
 +      arg=$1;
 +      case $arg in #(
 +      *"$as_nl"*)
 +      expr "X$arg" : "X\\(.*\\)$as_nl";
 +      arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
 +      esac;
 +      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
 +    '
 +    export as_echo_n_body
 +    as_echo_n='sh -c $as_echo_n_body as_echo'
 +  fi
 +  export as_echo_body
 +  as_echo='sh -c $as_echo_body as_echo'
 +fi
 +
 +# The user is always right.
 +if test "${PATH_SEPARATOR+set}" != set; then
 +  PATH_SEPARATOR=:
 +  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
 +    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
 +      PATH_SEPARATOR=';'
 +  }
 +fi
 +
 +
 +# IFS
 +# We need space, tab and new line, in precisely that order.  Quoting is
 +# there to prevent editors from complaining about space-tab.
 +# (If _AS_PATH_WALK were called with IFS unset, it would disable word
 +# splitting by setting IFS to empty value.)
 +IFS=" ""      $as_nl"
 +
 +# Find who we are.  Look in the path if we contain no directory separator.
 +case $0 in #((
 +  *[\\/]* ) as_myself=$0 ;;
 +  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
 +  done
 +IFS=$as_save_IFS
 +
 +     ;;
 +esac
 +# We did not find ourselves, most probably we were run as `sh COMMAND'
 +# in which case we are not to be found in the path.
 +if test "x$as_myself" = x; then
 +  as_myself=$0
 +fi
 +if test ! -f "$as_myself"; then
 +  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
 +  exit 1
 +fi
 +
 +# Unset variables that we do not need and which cause bugs (e.g. in
 +# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
 +# suppresses any "Segmentation fault" message there.  '((' could
 +# trigger a bug in pdksh 5.2.14.
 +for as_var in BASH_ENV ENV MAIL MAILPATH
 +do eval test x\${$as_var+set} = xset \
 +  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 +done
 +PS1='$ '
 +PS2='> '
 +PS4='+ '
 +
 +# NLS nuisances.
 +LC_ALL=C
 +export LC_ALL
 +LANGUAGE=C
 +export LANGUAGE
 +
 +# CDPATH.
 +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 +
 +if test "x$CONFIG_SHELL" = x; then
 +  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
 +  emulate sh
 +  NULLCMD=:
 +  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
 +  # is contrary to our usage.  Disable this feature.
 +  alias -g '\${1+\"\$@\"}'='\"\$@\"'
 +  setopt NO_GLOB_SUBST
 +else
 +  case \`(set -o) 2>/dev/null\` in #(
 +  *posix*) :
 +    set -o posix ;; #(
 +  *) :
 +     ;;
 +esac
 +fi
 +"
 +  as_required="as_fn_return () { (exit \$1); }
 +as_fn_success () { as_fn_return 0; }
 +as_fn_failure () { as_fn_return 1; }
 +as_fn_ret_success () { return 0; }
 +as_fn_ret_failure () { return 1; }
 +
 +exitcode=0
 +as_fn_success || { exitcode=1; echo as_fn_success failed.; }
 +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
 +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
 +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
 +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
 +
 +else
 +  exitcode=1; echo positional parameters were not saved.
 +fi
 +test x\$exitcode = x0 || exit 1"
 +  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
 +  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
 +  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
 +  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
 +test \$(( 1 + 1 )) = 2 || exit 1"
 +  if (eval "$as_required") 2>/dev/null; then :
 +  as_have_required=yes
 +else
 +  as_have_required=no
 +fi
 +  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
 +
 +else
 +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +as_found=false
 +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +  as_found=:
 +  case $as_dir in #(
 +       /*)
 +         for as_base in sh bash ksh sh5; do
 +           # Try only shells that exist, to save several forks.
 +           as_shell=$as_dir/$as_base
 +           if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
 +                  { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
 +  CONFIG_SHELL=$as_shell as_have_required=yes
 +                 if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
 +  break 2
 +fi
 +fi
 +         done;;
 +       esac
 +  as_found=false
 +done
 +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
 +            { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
 +  CONFIG_SHELL=$SHELL as_have_required=yes
 +fi; }
 +IFS=$as_save_IFS
 +
 +
 +      if test "x$CONFIG_SHELL" != x; then :
 +  # We cannot yet assume a decent shell, so we have to provide a
 +      # neutralization value for shells without unset; and this also
 +      # works around shells that cannot unset nonexistent variables.
 +      BASH_ENV=/dev/null
 +      ENV=/dev/null
 +      (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 +      export CONFIG_SHELL
 +      exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 +fi
 +
 +    if test x$as_have_required = xno; then :
 +  $as_echo "$0: This script requires a shell more modern than all"
 +  $as_echo "$0: the shells that I found on your system."
 +  if test x${ZSH_VERSION+set} = xset ; then
 +    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
 +    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
 +  else
 +    $as_echo "$0: Please tell bug-autoconf@gnu.org and
 +$0: bugs@project-moonshot.org about your system, including
 +$0: any error possibly output before this message. Then
 +$0: install a modern shell, or manually run the script
 +$0: under such a shell if you do have one."
 +  fi
 +  exit 1
 +fi
 +fi
 +fi
 +SHELL=${CONFIG_SHELL-/bin/sh}
 +export SHELL
 +# Unset more variables known to interfere with behavior of common tools.
 +CLICOLOR_FORCE= GREP_OPTIONS=
 +unset CLICOLOR_FORCE GREP_OPTIONS
 +
 +## --------------------- ##
 +## M4sh Shell Functions. ##
 +## --------------------- ##
 +# as_fn_unset VAR
 +# ---------------
 +# Portably unset VAR.
 +as_fn_unset ()
 +{
 +  { eval $1=; unset $1;}
 +}
 +as_unset=as_fn_unset
 +
 +# as_fn_set_status STATUS
 +# -----------------------
 +# Set $? to STATUS, without forking.
 +as_fn_set_status ()
 +{
 +  return $1
 +} # as_fn_set_status
 +
 +# as_fn_exit STATUS
 +# -----------------
 +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
 +as_fn_exit ()
 +{
 +  set +e
 +  as_fn_set_status $1
 +  exit $1
 +} # as_fn_exit
 +
 +# as_fn_mkdir_p
 +# -------------
 +# Create "$as_dir" as a directory, including parents if necessary.
 +as_fn_mkdir_p ()
 +{
 +
 +  case $as_dir in #(
 +  -*) as_dir=./$as_dir;;
 +  esac
 +  test -d "$as_dir" || eval $as_mkdir_p || {
 +    as_dirs=
 +    while :; do
 +      case $as_dir in #(
 +      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
 +      *) as_qdir=$as_dir;;
 +      esac
 +      as_dirs="'$as_qdir' $as_dirs"
 +      as_dir=`$as_dirname -- "$as_dir" ||
 +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$as_dir" : 'X\(//\)[^/]' \| \
 +       X"$as_dir" : 'X\(//\)$' \| \
 +       X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$as_dir" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +      test -d "$as_dir" && break
 +    done
 +    test -z "$as_dirs" || eval "mkdir $as_dirs"
 +  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 +
 +
 +} # as_fn_mkdir_p
 +# as_fn_append VAR VALUE
 +# ----------------------
 +# Append the text in VALUE to the end of the definition contained in VAR. Take
 +# advantage of any shell optimizations that allow amortized linear growth over
 +# repeated appends, instead of the typical quadratic growth present in naive
 +# implementations.
 +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
 +  eval 'as_fn_append ()
 +  {
 +    eval $1+=\$2
 +  }'
 +else
 +  as_fn_append ()
 +  {
 +    eval $1=\$$1\$2
 +  }
 +fi # as_fn_append
 +
 +# as_fn_arith ARG...
 +# ------------------
 +# Perform arithmetic evaluation on the ARGs, and store the result in the
 +# global $as_val. Take advantage of shells that can avoid forks. The arguments
 +# must be portable across $(()) and expr.
 +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
 +  eval 'as_fn_arith ()
 +  {
 +    as_val=$(( $* ))
 +  }'
 +else
 +  as_fn_arith ()
 +  {
 +    as_val=`expr "$@" || test $? -eq 1`
 +  }
 +fi # as_fn_arith
 +
 +
 +# as_fn_error STATUS ERROR [LINENO LOG_FD]
 +# ----------------------------------------
 +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
 +# script with STATUS, using 1 if that was 0.
 +as_fn_error ()
 +{
 +  as_status=$1; test $as_status -eq 0 && as_status=1
 +  if test "$4"; then
 +    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
 +  fi
 +  $as_echo "$as_me: error: $2" >&2
 +  as_fn_exit $as_status
 +} # as_fn_error
 +
 +if expr a : '\(a\)' >/dev/null 2>&1 &&
 +   test "X`expr 00001 : '.*\(...\)'`" = X001; then
 +  as_expr=expr
 +else
 +  as_expr=false
 +fi
 +
 +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
 +  as_basename=basename
 +else
 +  as_basename=false
 +fi
 +
 +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
 +  as_dirname=dirname
 +else
 +  as_dirname=false
 +fi
 +
 +as_me=`$as_basename -- "$0" ||
 +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 +       X"$0" : 'X\(//\)$' \| \
 +       X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X/"$0" |
 +    sed '/^.*\/\([^/][^/]*\)\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\/\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\/\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +
 +# Avoid depending upon Character Ranges.
 +as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
 +as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 +as_cr_digits='0123456789'
 +as_cr_alnum=$as_cr_Letters$as_cr_digits
 +
 +
 +  as_lineno_1=$LINENO as_lineno_1a=$LINENO
 +  as_lineno_2=$LINENO as_lineno_2a=$LINENO
 +  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
 +  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
 +  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
 +  sed -n '
 +    p
 +    /[$]LINENO/=
 +  ' <$as_myself |
 +    sed '
 +      s/[$]LINENO.*/&-/
 +      t lineno
 +      b
 +      :lineno
 +      N
 +      :loop
 +      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
 +      t loop
 +      s/-\n.*//
 +    ' >$as_me.lineno &&
 +  chmod +x "$as_me.lineno" ||
 +    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 +
 +  # Don't try to exec as it changes $[0], causing all sort of problems
 +  # (the dirname of $[0] is not the place where we might find the
 +  # original and so on.  Autoconf is especially sensitive to this).
 +  . "./$as_me.lineno"
 +  # Exit status is that of the last command.
 +  exit
 +}
 +
 +ECHO_C= ECHO_N= ECHO_T=
 +case `echo -n x` in #(((((
 +-n*)
 +  case `echo 'xy\c'` in
 +  *c*) ECHO_T='       ';;     # ECHO_T is single tab character.
 +  xy)  ECHO_C='\c';;
 +  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
 +       ECHO_T='       ';;
 +  esac;;
 +*)
 +  ECHO_N='-n';;
 +esac
 +
 +rm -f conf$$ conf$$.exe conf$$.file
 +if test -d conf$$.dir; then
 +  rm -f conf$$.dir/conf$$.file
 +else
 +  rm -f conf$$.dir
 +  mkdir conf$$.dir 2>/dev/null
 +fi
 +if (echo >conf$$.file) 2>/dev/null; then
 +  if ln -s conf$$.file conf$$ 2>/dev/null; then
 +    as_ln_s='ln -s'
 +    # ... but there are two gotchas:
 +    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
 +    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
 +    # In both cases, we have to default to `cp -p'.
 +    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
 +      as_ln_s='cp -p'
 +  elif ln conf$$.file conf$$ 2>/dev/null; then
 +    as_ln_s=ln
 +  else
 +    as_ln_s='cp -p'
 +  fi
 +else
 +  as_ln_s='cp -p'
 +fi
 +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 +rmdir conf$$.dir 2>/dev/null
 +
 +if mkdir -p . 2>/dev/null; then
 +  as_mkdir_p='mkdir -p "$as_dir"'
 +else
 +  test -d ./-p && rmdir ./-p
 +  as_mkdir_p=false
 +fi
 +
 +if test -x / >/dev/null 2>&1; then
 +  as_test_x='test -x'
 +else
 +  if ls -dL / >/dev/null 2>&1; then
 +    as_ls_L_option=L
 +  else
 +    as_ls_L_option=
 +  fi
 +  as_test_x='
 +    eval sh -c '\''
 +      if test -d "$1"; then
 +      test -d "$1/.";
 +      else
 +      case $1 in #(
 +      -*)set "./$1";;
 +      esac;
 +      case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 +      ???[sx]*):;;*)false;;esac;fi
 +    '\'' sh
 +  '
 +fi
 +as_executable_p=$as_test_x
 +
 +# Sed expression to map a string onto a valid CPP name.
 +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 +
 +# Sed expression to map a string onto a valid variable name.
 +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 +
 +
 +
 +# Check that we are running under the correct shell.
 +SHELL=${CONFIG_SHELL-/bin/sh}
 +
 +case X$lt_ECHO in
 +X*--fallback-echo)
 +  # Remove one level of quotation (which was required for Make).
 +  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
 +  ;;
 +esac
 +
 +ECHO=${lt_ECHO-echo}
 +if test "X$1" = X--no-reexec; then
 +  # Discard the --no-reexec flag, and continue.
 +  shift
 +elif test "X$1" = X--fallback-echo; then
 +  # Avoid inline document here, it may be left over
 +  :
 +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
 +  # Yippee, $ECHO works!
 +  :
 +else
 +  # Restart under the correct shell.
 +  exec $SHELL "$0" --no-reexec ${1+"$@"}
 +fi
 +
 +if test "X$1" = X--fallback-echo; then
 +  # used as fallback echo
 +  shift
 +  cat <<_LT_EOF
 +$*
 +_LT_EOF
 +  exit 0
 +fi
 +
 +# The HP-UX ksh and POSIX shell print the target directory to stdout
 +# if CDPATH is set.
 +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 +
 +if test -z "$lt_ECHO"; then
 +  if test "X${echo_test_string+set}" != Xset; then
 +    # find a string as large as possible, as long as the shell can cope with it
 +    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
 +      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
 +      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
 +       { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
 +      then
 +        break
 +      fi
 +    done
 +  fi
 +
 +  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
 +     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
 +     test "X$echo_testing_string" = "X$echo_test_string"; then
 +    :
 +  else
 +    # The Solaris, AIX, and Digital Unix default echo programs unquote
 +    # backslashes.  This makes it impossible to quote backslashes using
 +    #   echo "$something" | sed 's/\\/\\\\/g'
 +    #
 +    # So, first we look for a working echo in the user's PATH.
 +
 +    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
 +    for dir in $PATH /usr/ucb; do
 +      IFS="$lt_save_ifs"
 +      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
 +         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
 +         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
 +         test "X$echo_testing_string" = "X$echo_test_string"; then
 +        ECHO="$dir/echo"
 +        break
 +      fi
 +    done
 +    IFS="$lt_save_ifs"
 +
 +    if test "X$ECHO" = Xecho; then
 +      # We didn't find a better echo, so look for alternatives.
 +      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
 +         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
 +         test "X$echo_testing_string" = "X$echo_test_string"; then
 +        # This shell has a builtin print -r that does the trick.
 +        ECHO='print -r'
 +      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
 +         test "X$CONFIG_SHELL" != X/bin/ksh; then
 +        # If we have ksh, try running configure again with it.
 +        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
 +        export ORIGINAL_CONFIG_SHELL
 +        CONFIG_SHELL=/bin/ksh
 +        export CONFIG_SHELL
 +        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
 +      else
 +        # Try using printf.
 +        ECHO='printf %s\n'
 +        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
 +         echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
 +         test "X$echo_testing_string" = "X$echo_test_string"; then
 +        # Cool, printf works
 +        :
 +        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
 +           test "X$echo_testing_string" = 'X\t' &&
 +           echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
 +           test "X$echo_testing_string" = "X$echo_test_string"; then
 +        CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
 +        export CONFIG_SHELL
 +        SHELL="$CONFIG_SHELL"
 +        export SHELL
 +        ECHO="$CONFIG_SHELL $0 --fallback-echo"
 +        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
 +           test "X$echo_testing_string" = 'X\t' &&
 +           echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
 +           test "X$echo_testing_string" = "X$echo_test_string"; then
 +        ECHO="$CONFIG_SHELL $0 --fallback-echo"
 +        else
 +        # maybe with a smaller string...
 +        prev=:
 +
 +        for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
 +          if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
 +          then
 +            break
 +          fi
 +          prev="$cmd"
 +        done
 +
 +        if test "$prev" != 'sed 50q "$0"'; then
 +          echo_test_string=`eval $prev`
 +          export echo_test_string
 +          exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
 +        else
 +          # Oops.  We lost completely, so just stick with echo.
 +          ECHO=echo
 +        fi
 +        fi
 +      fi
 +    fi
 +  fi
 +fi
 +
 +# Copy echo and quote the copy suitably for passing to libtool from
 +# the Makefile, instead of quoting the original, which is used later.
 +lt_ECHO=$ECHO
 +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
 +   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 +fi
 +
 +
 +
 +
 +test -n "$DJDIR" || exec 7<&0 </dev/null
 +exec 6>&1
 +
 +# Name of the host.
 +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
 +# so uname gets run too.
 +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 +
 +#
 +# Initializations.
 +#
 +ac_default_prefix=/usr/local
 +ac_clean_files=
 +ac_config_libobj_dir=.
 +LIBOBJS=
 +cross_compiling=no
 +subdirs=
 +MFLAGS=
 +MAKEFLAGS=
 +
 +# Identity of this package.
 +PACKAGE_NAME='mech_eap'
 +PACKAGE_TARNAME='mech_eap'
 +PACKAGE_VERSION='0.1'
 +PACKAGE_STRING='mech_eap 0.1'
 +PACKAGE_BUGREPORT='bugs@project-moonshot.org'
 +PACKAGE_URL=''
 +
 +# Factoring default headers for most tests.
 +ac_includes_default="\
 +#include <stdio.h>
 +#ifdef HAVE_SYS_TYPES_H
 +# include <sys/types.h>
 +#endif
 +#ifdef HAVE_SYS_STAT_H
 +# include <sys/stat.h>
 +#endif
 +#ifdef STDC_HEADERS
 +# include <stdlib.h>
 +# include <stddef.h>
 +#else
 +# ifdef HAVE_STDLIB_H
 +#  include <stdlib.h>
 +# endif
 +#endif
 +#ifdef HAVE_STRING_H
 +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 +#  include <memory.h>
 +# endif
 +# include <string.h>
 +#endif
 +#ifdef HAVE_STRINGS_H
 +# include <strings.h>
 +#endif
 +#ifdef HAVE_INTTYPES_H
 +# include <inttypes.h>
 +#endif
 +#ifdef HAVE_STDINT_H
 +# include <stdint.h>
 +#endif
 +#ifdef HAVE_UNISTD_H
 +# include <unistd.h>
 +#endif"
 +
 +ac_subst_vars='am__EXEEXT_FALSE
 +am__EXEEXT_TRUE
 +LTLIBOBJS
- SHIBRESOLVER_LIBS
- SHIBRESOLVER_LDFLAGS
- SHIBRESOLVER_CXXFLAGS
++LIBMOONSHOT_FALSE
++LIBMOONSHOT_TRUE
++LIBMOONSHOT_LIBS
++LIBMOONSHOT_LDFLAGS
++LIBMOONSHOT_CFLAGS
 +JANSSON_LIBS
 +JANSSON_LDFLAGS
 +JANSSON_CFLAGS
 +RADSEC_LIBS
 +RADSEC_LDFLAGS
 +RADSEC_CFLAGS
- COMPILE_ET
 +SHIBSP_LIBS
 +SHIBSP_LDFLAGS
 +SHIBSP_CXXFLAGS
++SHIBRESOLVER_FALSE
++SHIBRESOLVER_TRUE
++SHIBRESOLVER_LIBS
++SHIBRESOLVER_LDFLAGS
++SHIBRESOLVER_CXXFLAGS
++OPENSAML_FALSE
++OPENSAML_TRUE
++OPENSAML_LIBS
++OPENSAML_LDFLAGS
++OPENSAML_CXXFLAGS
 +HEIMDAL_FALSE
 +HEIMDAL_TRUE
- CPP
 +KRB5_LIBS
++KRB5_LDFLAGS
 +KRB5_CFLAGS
++COMPILE_ET
++TARGET_WINDOWS_FALSE
++TARGET_WINDOWS_TRUE
 +TARGET_LDFLAGS
 +TARGET_CFLAGS
++GSSEAP_ENABLE_ACCEPTOR_FALSE
++GSSEAP_ENABLE_ACCEPTOR_TRUE
 +GSSEAP_ENABLE_REAUTH_FALSE
 +GSSEAP_ENABLE_REAUTH_TRUE
++LIBOBJS
 +CXXCPP
 +am__fastdepCXX_FALSE
 +am__fastdepCXX_TRUE
 +CXXDEPMODE
 +ac_ct_CXX
 +CXXFLAGS
 +CXX
- OBJDUMP
 +OTOOL64
 +OTOOL
 +LIPO
 +NMEDIT
 +DSYMUTIL
 +lt_ECHO
 +RANLIB
 +AR
- EGREP
- GREP
 +LN_S
 +NM
 +ac_ct_DUMPBIN
 +DUMPBIN
 +LD
 +FGREP
- am__fastdepCC_FALSE
- am__fastdepCC_TRUE
- CCDEPMODE
- AMDEPBACKSLASH
- AMDEP_FALSE
- AMDEP_TRUE
- am__quote
- am__include
- DEPDIR
- OBJEXT
- EXEEXT
- ac_ct_CC
- CPPFLAGS
- LDFLAGS
- CFLAGS
- CC
 +SED
- enable_dependency_tracking
 +host_os
 +host_vendor
 +host_cpu
 +host
 +build_os
 +build_vendor
 +build_cpu
 +build
 +LIBTOOL
++OBJDUMP
++DLLTOOL
++AS
++MAINT
++MAINTAINER_MODE_FALSE
++MAINTAINER_MODE_TRUE
++am__fastdepCC_FALSE
++am__fastdepCC_TRUE
++CCDEPMODE
++AMDEPBACKSLASH
++AMDEP_FALSE
++AMDEP_TRUE
++am__quote
++am__include
++DEPDIR
 +am__untar
 +am__tar
 +AMTAR
 +am__leading_dot
 +SET_MAKE
 +AWK
 +mkdir_p
 +MKDIR_P
 +INSTALL_STRIP_PROGRAM
 +STRIP
 +install_sh
 +MAKEINFO
 +AUTOHEADER
 +AUTOMAKE
 +AUTOCONF
 +ACLOCAL
 +VERSION
 +PACKAGE
 +CYGPATH_W
 +am__isrc
 +INSTALL_DATA
 +INSTALL_SCRIPT
 +INSTALL_PROGRAM
++EGREP
++GREP
++CPP
++OBJEXT
++EXEEXT
++ac_ct_CC
++CPPFLAGS
++LDFLAGS
++CFLAGS
++CC
 +target_alias
 +host_alias
 +build_alias
 +LIBS
 +ECHO_T
 +ECHO_N
 +ECHO_C
 +DEFS
 +mandir
 +localedir
 +libdir
 +psdir
 +pdfdir
 +dvidir
 +htmldir
 +infodir
 +docdir
 +oldincludedir
 +includedir
 +localstatedir
 +sharedstatedir
 +sysconfdir
 +datadir
 +datarootdir
 +libexecdir
 +sbindir
 +bindir
 +program_transform_name
 +prefix
 +exec_prefix
 +PACKAGE_URL
 +PACKAGE_BUGREPORT
 +PACKAGE_STRING
 +PACKAGE_VERSION
 +PACKAGE_TARNAME
 +PACKAGE_NAME
 +PATH_SEPARATOR
 +SHELL'
 +ac_subst_files=''
 +ac_user_opts='
 +enable_option_checking
++enable_dependency_tracking
++enable_maintainer_mode
 +enable_static
 +enable_shared
 +with_pic
 +enable_fast_install
- with_shibsp
 +with_gnu_ld
 +enable_libtool_lock
 +enable_reauth
++enable_acceptor
 +with_krb5
-   --disable-dependency-tracking  speeds up one-time build
-   --enable-dependency-tracking   do not reject slow dependency extractors
++with_opensaml
 +with_shibresolver
++with_shibsp
 +with_radsec
 +with_jansson
++with_libmoonshot
 +'
 +      ac_precious_vars='build_alias
 +host_alias
 +target_alias
 +CC
 +CFLAGS
 +LDFLAGS
 +LIBS
 +CPPFLAGS
 +CPP
 +CXX
 +CXXFLAGS
 +CCC
 +CXXCPP'
 +
 +
 +# Initialize some variables set by options.
 +ac_init_help=
 +ac_init_version=false
 +ac_unrecognized_opts=
 +ac_unrecognized_sep=
 +# The variables have the same names as the options, with
 +# dashes changed to underlines.
 +cache_file=/dev/null
 +exec_prefix=NONE
 +no_create=
 +no_recursion=
 +prefix=NONE
 +program_prefix=NONE
 +program_suffix=NONE
 +program_transform_name=s,x,x,
 +silent=
 +site=
 +srcdir=
 +verbose=
 +x_includes=NONE
 +x_libraries=NONE
 +
 +# Installation directory options.
 +# These are left unexpanded so users can "make install exec_prefix=/foo"
 +# and all the variables that are supposed to be based on exec_prefix
 +# by default will actually change.
 +# Use braces instead of parens because sh, perl, etc. also accept them.
 +# (The list follows the same order as the GNU Coding Standards.)
 +bindir='${exec_prefix}/bin'
 +sbindir='${exec_prefix}/sbin'
 +libexecdir='${exec_prefix}/libexec'
 +datarootdir='${prefix}/share'
 +datadir='${datarootdir}'
 +sysconfdir='${prefix}/etc'
 +sharedstatedir='${prefix}/com'
 +localstatedir='${prefix}/var'
 +includedir='${prefix}/include'
 +oldincludedir='/usr/include'
 +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
 +infodir='${datarootdir}/info'
 +htmldir='${docdir}'
 +dvidir='${docdir}'
 +pdfdir='${docdir}'
 +psdir='${docdir}'
 +libdir='${exec_prefix}/lib'
 +localedir='${datarootdir}/locale'
 +mandir='${datarootdir}/man'
 +
 +ac_prev=
 +ac_dashdash=
 +for ac_option
 +do
 +  # If the previous option needs an argument, assign it.
 +  if test -n "$ac_prev"; then
 +    eval $ac_prev=\$ac_option
 +    ac_prev=
 +    continue
 +  fi
 +
 +  case $ac_option in
 +  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
 +  *=)   ac_optarg= ;;
 +  *)    ac_optarg=yes ;;
 +  esac
 +
 +  # Accept the important Cygnus configure options, so we can diagnose typos.
 +
 +  case $ac_dashdash$ac_option in
 +  --)
 +    ac_dashdash=yes ;;
 +
 +  -bindir | --bindir | --bindi | --bind | --bin | --bi)
 +    ac_prev=bindir ;;
 +  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
 +    bindir=$ac_optarg ;;
 +
 +  -build | --build | --buil | --bui | --bu)
 +    ac_prev=build_alias ;;
 +  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
 +    build_alias=$ac_optarg ;;
 +
 +  -cache-file | --cache-file | --cache-fil | --cache-fi \
 +  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
 +    ac_prev=cache_file ;;
 +  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
 +  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
 +    cache_file=$ac_optarg ;;
 +
 +  --config-cache | -C)
 +    cache_file=config.cache ;;
 +
 +  -datadir | --datadir | --datadi | --datad)
 +    ac_prev=datadir ;;
 +  -datadir=* | --datadir=* | --datadi=* | --datad=*)
 +    datadir=$ac_optarg ;;
 +
 +  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
 +  | --dataroo | --dataro | --datar)
 +    ac_prev=datarootdir ;;
 +  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
 +  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
 +    datarootdir=$ac_optarg ;;
 +
 +  -disable-* | --disable-*)
 +    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
 +    # Reject names that are not valid shell variable names.
 +    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
 +      as_fn_error $? "invalid feature name: $ac_useropt"
 +    ac_useropt_orig=$ac_useropt
 +    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
 +    case $ac_user_opts in
 +      *"
 +"enable_$ac_useropt"
 +"*) ;;
 +      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
 +       ac_unrecognized_sep=', ';;
 +    esac
 +    eval enable_$ac_useropt=no ;;
 +
 +  -docdir | --docdir | --docdi | --doc | --do)
 +    ac_prev=docdir ;;
 +  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
 +    docdir=$ac_optarg ;;
 +
 +  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
 +    ac_prev=dvidir ;;
 +  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
 +    dvidir=$ac_optarg ;;
 +
 +  -enable-* | --enable-*)
 +    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
 +    # Reject names that are not valid shell variable names.
 +    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
 +      as_fn_error $? "invalid feature name: $ac_useropt"
 +    ac_useropt_orig=$ac_useropt
 +    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
 +    case $ac_user_opts in
 +      *"
 +"enable_$ac_useropt"
 +"*) ;;
 +      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
 +       ac_unrecognized_sep=', ';;
 +    esac
 +    eval enable_$ac_useropt=\$ac_optarg ;;
 +
 +  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
 +  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
 +  | --exec | --exe | --ex)
 +    ac_prev=exec_prefix ;;
 +  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
 +  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
 +  | --exec=* | --exe=* | --ex=*)
 +    exec_prefix=$ac_optarg ;;
 +
 +  -gas | --gas | --ga | --g)
 +    # Obsolete; use --with-gas.
 +    with_gas=yes ;;
 +
 +  -help | --help | --hel | --he | -h)
 +    ac_init_help=long ;;
 +  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
 +    ac_init_help=recursive ;;
 +  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
 +    ac_init_help=short ;;
 +
 +  -host | --host | --hos | --ho)
 +    ac_prev=host_alias ;;
 +  -host=* | --host=* | --hos=* | --ho=*)
 +    host_alias=$ac_optarg ;;
 +
 +  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
 +    ac_prev=htmldir ;;
 +  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
 +  | --ht=*)
 +    htmldir=$ac_optarg ;;
 +
 +  -includedir | --includedir | --includedi | --included | --include \
 +  | --includ | --inclu | --incl | --inc)
 +    ac_prev=includedir ;;
 +  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
 +  | --includ=* | --inclu=* | --incl=* | --inc=*)
 +    includedir=$ac_optarg ;;
 +
 +  -infodir | --infodir | --infodi | --infod | --info | --inf)
 +    ac_prev=infodir ;;
 +  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
 +    infodir=$ac_optarg ;;
 +
 +  -libdir | --libdir | --libdi | --libd)
 +    ac_prev=libdir ;;
 +  -libdir=* | --libdir=* | --libdi=* | --libd=*)
 +    libdir=$ac_optarg ;;
 +
 +  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
 +  | --libexe | --libex | --libe)
 +    ac_prev=libexecdir ;;
 +  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
 +  | --libexe=* | --libex=* | --libe=*)
 +    libexecdir=$ac_optarg ;;
 +
 +  -localedir | --localedir | --localedi | --localed | --locale)
 +    ac_prev=localedir ;;
 +  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
 +    localedir=$ac_optarg ;;
 +
 +  -localstatedir | --localstatedir | --localstatedi | --localstated \
 +  | --localstate | --localstat | --localsta | --localst | --locals)
 +    ac_prev=localstatedir ;;
 +  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
 +  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
 +    localstatedir=$ac_optarg ;;
 +
 +  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
 +    ac_prev=mandir ;;
 +  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
 +    mandir=$ac_optarg ;;
 +
 +  -nfp | --nfp | --nf)
 +    # Obsolete; use --without-fp.
 +    with_fp=no ;;
 +
 +  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
 +  | --no-cr | --no-c | -n)
 +    no_create=yes ;;
 +
 +  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
 +  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
 +    no_recursion=yes ;;
 +
 +  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
 +  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
 +  | --oldin | --oldi | --old | --ol | --o)
 +    ac_prev=oldincludedir ;;
 +  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
 +  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
 +  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
 +    oldincludedir=$ac_optarg ;;
 +
 +  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
 +    ac_prev=prefix ;;
 +  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
 +    prefix=$ac_optarg ;;
 +
 +  -program-prefix | --program-prefix | --program-prefi | --program-pref \
 +  | --program-pre | --program-pr | --program-p)
 +    ac_prev=program_prefix ;;
 +  -program-prefix=* | --program-prefix=* | --program-prefi=* \
 +  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
 +    program_prefix=$ac_optarg ;;
 +
 +  -program-suffix | --program-suffix | --program-suffi | --program-suff \
 +  | --program-suf | --program-su | --program-s)
 +    ac_prev=program_suffix ;;
 +  -program-suffix=* | --program-suffix=* | --program-suffi=* \
 +  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
 +    program_suffix=$ac_optarg ;;
 +
 +  -program-transform-name | --program-transform-name \
 +  | --program-transform-nam | --program-transform-na \
 +  | --program-transform-n | --program-transform- \
 +  | --program-transform | --program-transfor \
 +  | --program-transfo | --program-transf \
 +  | --program-trans | --program-tran \
 +  | --progr-tra | --program-tr | --program-t)
 +    ac_prev=program_transform_name ;;
 +  -program-transform-name=* | --program-transform-name=* \
 +  | --program-transform-nam=* | --program-transform-na=* \
 +  | --program-transform-n=* | --program-transform-=* \
 +  | --program-transform=* | --program-transfor=* \
 +  | --program-transfo=* | --program-transf=* \
 +  | --program-trans=* | --program-tran=* \
 +  | --progr-tra=* | --program-tr=* | --program-t=*)
 +    program_transform_name=$ac_optarg ;;
 +
 +  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
 +    ac_prev=pdfdir ;;
 +  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
 +    pdfdir=$ac_optarg ;;
 +
 +  -psdir | --psdir | --psdi | --psd | --ps)
 +    ac_prev=psdir ;;
 +  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
 +    psdir=$ac_optarg ;;
 +
 +  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
 +  | -silent | --silent | --silen | --sile | --sil)
 +    silent=yes ;;
 +
 +  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
 +    ac_prev=sbindir ;;
 +  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
 +  | --sbi=* | --sb=*)
 +    sbindir=$ac_optarg ;;
 +
 +  -sharedstatedir | --sharedstatedir | --sharedstatedi \
 +  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
 +  | --sharedst | --shareds | --shared | --share | --shar \
 +  | --sha | --sh)
 +    ac_prev=sharedstatedir ;;
 +  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
 +  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
 +  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
 +  | --sha=* | --sh=*)
 +    sharedstatedir=$ac_optarg ;;
 +
 +  -site | --site | --sit)
 +    ac_prev=site ;;
 +  -site=* | --site=* | --sit=*)
 +    site=$ac_optarg ;;
 +
 +  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
 +    ac_prev=srcdir ;;
 +  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
 +    srcdir=$ac_optarg ;;
 +
 +  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
 +  | --syscon | --sysco | --sysc | --sys | --sy)
 +    ac_prev=sysconfdir ;;
 +  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
 +  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
 +    sysconfdir=$ac_optarg ;;
 +
 +  -target | --target | --targe | --targ | --tar | --ta | --t)
 +    ac_prev=target_alias ;;
 +  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
 +    target_alias=$ac_optarg ;;
 +
 +  -v | -verbose | --verbose | --verbos | --verbo | --verb)
 +    verbose=yes ;;
 +
 +  -version | --version | --versio | --versi | --vers | -V)
 +    ac_init_version=: ;;
 +
 +  -with-* | --with-*)
 +    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
 +    # Reject names that are not valid shell variable names.
 +    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
 +      as_fn_error $? "invalid package name: $ac_useropt"
 +    ac_useropt_orig=$ac_useropt
 +    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
 +    case $ac_user_opts in
 +      *"
 +"with_$ac_useropt"
 +"*) ;;
 +      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
 +       ac_unrecognized_sep=', ';;
 +    esac
 +    eval with_$ac_useropt=\$ac_optarg ;;
 +
 +  -without-* | --without-*)
 +    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
 +    # Reject names that are not valid shell variable names.
 +    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
 +      as_fn_error $? "invalid package name: $ac_useropt"
 +    ac_useropt_orig=$ac_useropt
 +    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
 +    case $ac_user_opts in
 +      *"
 +"with_$ac_useropt"
 +"*) ;;
 +      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
 +       ac_unrecognized_sep=', ';;
 +    esac
 +    eval with_$ac_useropt=no ;;
 +
 +  --x)
 +    # Obsolete; use --with-x.
 +    with_x=yes ;;
 +
 +  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
 +  | --x-incl | --x-inc | --x-in | --x-i)
 +    ac_prev=x_includes ;;
 +  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
 +  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
 +    x_includes=$ac_optarg ;;
 +
 +  -x-libraries | --x-libraries | --x-librarie | --x-librari \
 +  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
 +    ac_prev=x_libraries ;;
 +  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
 +  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
 +    x_libraries=$ac_optarg ;;
 +
 +  -*) as_fn_error $? "unrecognized option: \`$ac_option'
 +Try \`$0 --help' for more information"
 +    ;;
 +
 +  *=*)
 +    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
 +    # Reject names that are not valid shell variable names.
 +    case $ac_envvar in #(
 +      '' | [0-9]* | *[!_$as_cr_alnum]* )
 +      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
 +    esac
 +    eval $ac_envvar=\$ac_optarg
 +    export $ac_envvar ;;
 +
 +  *)
 +    # FIXME: should be removed in autoconf 3.0.
 +    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
 +    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
 +      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
 +    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
 +    ;;
 +
 +  esac
 +done
 +
 +if test -n "$ac_prev"; then
 +  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
 +  as_fn_error $? "missing argument to $ac_option"
 +fi
 +
 +if test -n "$ac_unrecognized_opts"; then
 +  case $enable_option_checking in
 +    no) ;;
 +    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
 +    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
 +  esac
 +fi
 +
 +# Check all directory arguments for consistency.
 +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
 +              datadir sysconfdir sharedstatedir localstatedir includedir \
 +              oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
 +              libdir localedir mandir
 +do
 +  eval ac_val=\$$ac_var
 +  # Remove trailing slashes.
 +  case $ac_val in
 +    */ )
 +      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
 +      eval $ac_var=\$ac_val;;
 +  esac
 +  # Be sure to have absolute directory names.
 +  case $ac_val in
 +    [\\/$]* | ?:[\\/]* )  continue;;
 +    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
 +  esac
 +  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 +done
 +
 +# There might be people who depend on the old broken behavior: `$host'
 +# used to hold the argument of --host etc.
 +# FIXME: To remove some day.
 +build=$build_alias
 +host=$host_alias
 +target=$target_alias
 +
 +# FIXME: To remove some day.
 +if test "x$host_alias" != x; then
 +  if test "x$build_alias" = x; then
 +    cross_compiling=maybe
 +    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
 +    If a cross compiler is detected then cross compile mode will be used" >&2
 +  elif test "x$build_alias" != "x$host_alias"; then
 +    cross_compiling=yes
 +  fi
 +fi
 +
 +ac_tool_prefix=
 +test -n "$host_alias" && ac_tool_prefix=$host_alias-
 +
 +test "$silent" = yes && exec 6>/dev/null
 +
 +
 +ac_pwd=`pwd` && test -n "$ac_pwd" &&
 +ac_ls_di=`ls -di .` &&
 +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
 +  as_fn_error $? "working directory cannot be determined"
 +test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
 +  as_fn_error $? "pwd does not report name of working directory"
 +
 +
 +# Find the source files, if location was not specified.
 +if test -z "$srcdir"; then
 +  ac_srcdir_defaulted=yes
 +  # Try the directory containing this script, then the parent directory.
 +  ac_confdir=`$as_dirname -- "$as_myself" ||
 +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$as_myself" : 'X\(//\)[^/]' \| \
 +       X"$as_myself" : 'X\(//\)$' \| \
 +       X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$as_myself" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +  srcdir=$ac_confdir
 +  if test ! -r "$srcdir/$ac_unique_file"; then
 +    srcdir=..
 +  fi
 +else
 +  ac_srcdir_defaulted=no
 +fi
 +if test ! -r "$srcdir/$ac_unique_file"; then
 +  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
 +  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 +fi
 +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 +ac_abs_confdir=`(
 +      cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 +      pwd)`
 +# When building in place, set srcdir=.
 +if test "$ac_abs_confdir" = "$ac_pwd"; then
 +  srcdir=.
 +fi
 +# Remove unnecessary trailing slashes from srcdir.
 +# Double slashes in file names in object file debugging info
 +# mess up M-x gdb in Emacs.
 +case $srcdir in
 +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
 +esac
 +for ac_var in $ac_precious_vars; do
 +  eval ac_env_${ac_var}_set=\${${ac_var}+set}
 +  eval ac_env_${ac_var}_value=\$${ac_var}
 +  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
 +  eval ac_cv_env_${ac_var}_value=\$${ac_var}
 +done
 +
 +#
 +# Report the --help message.
 +#
 +if test "$ac_init_help" = "long"; then
 +  # Omit some internal or obsolete options to make the list less imposing.
 +  # This message is too long to be a string in the A/UX 3.1 sh.
 +  cat <<_ACEOF
 +\`configure' configures mech_eap 0.1 to adapt to many kinds of systems.
 +
 +Usage: $0 [OPTION]... [VAR=VALUE]...
 +
 +To assign environment variables (e.g., CC, CFLAGS...), specify them as
 +VAR=VALUE.  See below for descriptions of some of the useful variables.
 +
 +Defaults for the options are specified in brackets.
 +
 +Configuration:
 +  -h, --help              display this help and exit
 +      --help=short        display options specific to this package
 +      --help=recursive    display the short help of all the included packages
 +  -V, --version           display version information and exit
 +  -q, --quiet, --silent   do not print \`checking ...' messages
 +      --cache-file=FILE   cache test results in FILE [disabled]
 +  -C, --config-cache      alias for \`--cache-file=config.cache'
 +  -n, --no-create         do not create output files
 +      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 +
 +Installation directories:
 +  --prefix=PREFIX         install architecture-independent files in PREFIX
 +                          [$ac_default_prefix]
 +  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
 +                          [PREFIX]
 +
 +By default, \`make install' will install all the files in
 +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
 +an installation prefix other than \`$ac_default_prefix' using \`--prefix',
 +for instance \`--prefix=\$HOME'.
 +
 +For better control, use the options below.
 +
 +Fine tuning of the installation directories:
 +  --bindir=DIR            user executables [EPREFIX/bin]
 +  --sbindir=DIR           system admin executables [EPREFIX/sbin]
 +  --libexecdir=DIR        program executables [EPREFIX/libexec]
 +  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
 +  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
 +  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
 +  --libdir=DIR            object code libraries [EPREFIX/lib]
 +  --includedir=DIR        C header files [PREFIX/include]
 +  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
 +  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
 +  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
 +  --infodir=DIR           info documentation [DATAROOTDIR/info]
 +  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
 +  --mandir=DIR            man documentation [DATAROOTDIR/man]
 +  --docdir=DIR            documentation root [DATAROOTDIR/doc/mech_eap]
 +  --htmldir=DIR           html documentation [DOCDIR]
 +  --dvidir=DIR            dvi documentation [DOCDIR]
 +  --pdfdir=DIR            pdf documentation [DOCDIR]
 +  --psdir=DIR             ps documentation [DOCDIR]
 +_ACEOF
 +
 +  cat <<\_ACEOF
 +
 +Program names:
 +  --program-prefix=PREFIX            prepend PREFIX to installed program names
 +  --program-suffix=SUFFIX            append SUFFIX to installed program names
 +  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
 +
 +System types:
 +  --build=BUILD     configure for building on BUILD [guessed]
 +  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
 +_ACEOF
 +fi
 +
 +if test -n "$ac_init_help"; then
 +  case $ac_init_help in
 +     short | recursive ) echo "Configuration of mech_eap 0.1:";;
 +   esac
 +  cat <<\_ACEOF
 +
 +Optional Features:
 +  --disable-option-checking  ignore unrecognized --enable/--with options
 +  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
 +  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
++  --disable-dependency-tracking  speeds up one-time build
++  --enable-dependency-tracking   do not reject slow dependency extractors
++  --enable-maintainer-mode  enable make rules and dependencies not useful
++                        (and sometimes confusing) to the casual installer
 +  --enable-static[=PKGS]  build static libraries [default=no]
 +  --enable-shared[=PKGS]  build shared libraries [default=yes]
 +  --enable-fast-install[=PKGS]
 +                          optimize for fast installation [default=yes]
-   --with-shibsp           Use shibspboleth (in specified installation
-                           directory)
 +  --disable-libtool-lock  avoid locking (might break parallel builds)
 +  --enable-reauth whether to enable fast reauthentication protocol: yes/no; default no
++  --enable-acceptor whether to enable acceptor codepaths: yes/no; default yes
 +
 +Optional Packages:
 +  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
 +  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
 +  --with-pic              try to use only PIC/non-PIC objects [default=use
 +                          both]
 +  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
 +  --with-krb5             Use krb5 (in specified installation directory)
- # ac_fn_c_try_link LINENO
- # -----------------------
- # Try to link conftest.$ac_ext, and return whether this succeeded.
- ac_fn_c_try_link ()
++  --with-opensaml         Use OpenSAML (in specified installation directory)
 +  --with-shibresolver     Use Shibboleth resolver (in specified installation
 +                          directory)
++  --with-shibsp           Use shibspboleth (in specified installation
++                          directory)
 +  --with-radsec           Use radsec (in specified installation directory)
 +  --with-jansson          Use jansson (in specified installation directory)
++  --with-libmoonshot      Use libmoonshot (in specified installation
++                          directory)
 +
 +Some influential environment variables:
 +  CC          C compiler command
 +  CFLAGS      C compiler flags
 +  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
 +              nonstandard directory <lib dir>
 +  LIBS        libraries to pass to the linker, e.g. -l<library>
 +  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
 +              you have headers in a nonstandard directory <include dir>
 +  CPP         C preprocessor
 +  CXX         C++ compiler command
 +  CXXFLAGS    C++ compiler flags
 +  CXXCPP      C++ preprocessor
 +
 +Use these variables to override the choices made by `configure' or to help
 +it to find libraries and programs with nonstandard names/locations.
 +
 +Report bugs to <bugs@project-moonshot.org>.
 +_ACEOF
 +ac_status=$?
 +fi
 +
 +if test "$ac_init_help" = "recursive"; then
 +  # If there are subdirs, report their specific --help.
 +  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
 +    test -d "$ac_dir" ||
 +      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
 +      continue
 +    ac_builddir=.
 +
 +case "$ac_dir" in
 +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 +*)
 +  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
 +  # A ".." for each directory in $ac_dir_suffix.
 +  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
 +  case $ac_top_builddir_sub in
 +  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
 +  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
 +  esac ;;
 +esac
 +ac_abs_top_builddir=$ac_pwd
 +ac_abs_builddir=$ac_pwd$ac_dir_suffix
 +# for backward compatibility:
 +ac_top_builddir=$ac_top_build_prefix
 +
 +case $srcdir in
 +  .)  # We are building in place.
 +    ac_srcdir=.
 +    ac_top_srcdir=$ac_top_builddir_sub
 +    ac_abs_top_srcdir=$ac_pwd ;;
 +  [\\/]* | ?:[\\/]* )  # Absolute name.
 +    ac_srcdir=$srcdir$ac_dir_suffix;
 +    ac_top_srcdir=$srcdir
 +    ac_abs_top_srcdir=$srcdir ;;
 +  *) # Relative name.
 +    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
 +    ac_top_srcdir=$ac_top_build_prefix$srcdir
 +    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 +esac
 +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 +
 +    cd "$ac_dir" || { ac_status=$?; continue; }
 +    # Check for guested configure.
 +    if test -f "$ac_srcdir/configure.gnu"; then
 +      echo &&
 +      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
 +    elif test -f "$ac_srcdir/configure"; then
 +      echo &&
 +      $SHELL "$ac_srcdir/configure" --help=recursive
 +    else
 +      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
 +    fi || ac_status=$?
 +    cd "$ac_pwd" || { ac_status=$?; break; }
 +  done
 +fi
 +
 +test -n "$ac_init_help" && exit $ac_status
 +if $ac_init_version; then
 +  cat <<\_ACEOF
 +mech_eap configure 0.1
 +generated by GNU Autoconf 2.67
 +
 +Copyright (C) 2010 Free Software Foundation, Inc.
 +This configure script is free software; the Free Software Foundation
 +gives unlimited permission to copy, distribute and modify it.
 +_ACEOF
 +  exit
 +fi
 +
 +## ------------------------ ##
 +## Autoconf initialization. ##
 +## ------------------------ ##
 +
 +# ac_fn_c_try_compile LINENO
 +# --------------------------
 +# Try to compile conftest.$ac_ext, and return whether this succeeded.
 +ac_fn_c_try_compile ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  rm -f conftest.$ac_objext
 +  if { { ac_try="$ac_compile"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_compile") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    grep -v '^ *+' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +    mv -f conftest.er1 conftest.err
 +  fi
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } && {
 +       test -z "$ac_c_werror_flag" ||
 +       test ! -s conftest.err
 +       } && test -s conftest.$ac_objext; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
 +      ac_retval=1
 +fi
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
 +} # ac_fn_c_try_compile
 +
-   rm -f conftest.$ac_objext conftest$ac_exeext
-   if { { ac_try="$ac_link"
++# ac_fn_c_try_cpp LINENO
++# ----------------------
++# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_cpp ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-   (eval "$ac_link") 2>conftest.err
++  if { { ac_try="$ac_cpp conftest.$ac_ext"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
-   test $ac_status = 0; } && {
-        test -z "$ac_c_werror_flag" ||
++  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    grep -v '^ *+' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +    mv -f conftest.er1 conftest.err
 +  fi
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-        } && test -s conftest$ac_exeext && {
-        test "$cross_compiling" = yes ||
-        $as_test_x conftest$ac_exeext
++  test $ac_status = 0; } > conftest.i && {
++       test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 +       test ! -s conftest.err
-       ac_retval=1
 +       }; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
-   # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
-   # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
-   # interfere with the next link command; also delete a directory that is
-   # left behind by Apple's compiler.  We do this before executing the actions.
-   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++    ac_retval=1
 +fi
- } # ac_fn_c_try_link
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
- # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
++} # ac_fn_c_try_cpp
 +
- # Tests whether HEADER exists and can be compiled using the include files in
- # INCLUDES, setting the cache variable VAR accordingly.
- ac_fn_c_check_header_compile ()
++# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
 +# -------------------------------------------------------
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++# Tests whether HEADER exists, giving a warning if it cannot be compiled using
++# the include files in INCLUDES and setting the cache variable VAR
++# accordingly.
++ac_fn_c_check_header_mongrel ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++  if eval "test \"\${$3+set}\"" = set; then :
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 +$as_echo_n "checking for $2... " >&6; }
 +if eval "test \"\${$3+set}\"" = set; then :
 +  $as_echo_n "(cached) " >&6
++fi
++eval ac_res=\$$3
++             { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
 +else
-   eval "$3=yes"
++  # Is the header compilable?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
++$as_echo_n "checking $2 usability... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +$4
 +#include <$2>
 +_ACEOF
 +if ac_fn_c_try_compile "$LINENO"; then :
-   eval "$3=no"
++  ac_header_compiler=yes
 +else
- fi
- eval ac_res=\$$3
-              { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
- $as_echo "$ac_res" >&6; }
-   eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++  ac_header_compiler=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- } # ac_fn_c_check_header_compile
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
++$as_echo "$ac_header_compiler" >&6; }
 +
- # ac_fn_c_try_cpp LINENO
- # ----------------------
- # Try to preprocess conftest.$ac_ext, and return whether this succeeded.
- ac_fn_c_try_cpp ()
- {
-   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-   if { { ac_try="$ac_cpp conftest.$ac_ext"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
++# Is the header present?
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
++$as_echo_n "checking $2 presence... " >&6; }
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <$2>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++  ac_header_preproc=yes
++else
++  ac_header_preproc=no
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
++$as_echo "$ac_header_preproc" >&6; }
 +
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
-   ac_status=$?
-   if test -s conftest.err; then
-     grep -v '^ *+' conftest.err >conftest.er1
-     cat conftest.er1 >&5
-     mv -f conftest.er1 conftest.err
-   fi
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } > conftest.i && {
-        test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-        test ! -s conftest.err
-        }; then :
-   ac_retval=0
++# So?  What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
++  yes:no: )
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
++$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++    ;;
++  no:yes:* )
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
++$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
++$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
++$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
++$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
++$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
++( $as_echo "## ---------------------------------------- ##
++## Report this to bugs@project-moonshot.org ##
++## ---------------------------------------- ##"
++     ) | sed "s/^/$as_me: WARNING:     /" >&2
++    ;;
 +esac
-   $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
- 
-     ac_retval=1
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval "test \"\${$3+set}\"" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
-   as_fn_set_status $ac_retval
++  eval "$3=\$ac_header_compiler"
++fi
++eval ac_res=\$$3
++             { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
 +fi
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- } # ac_fn_c_try_cpp
 +
- # ac_fn_c_check_func LINENO FUNC VAR
- # ----------------------------------
- # Tests whether FUNC exists, setting the cache variable VAR accordingly
- ac_fn_c_check_func ()
++} # ac_fn_c_check_header_mongrel
 +
 +# ac_fn_c_try_run LINENO
 +# ----------------------
 +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
 +# that executables *can* be run.
 +ac_fn_c_try_run ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  if { { ac_try="$ac_link"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_link") 2>&5
 +  ac_status=$?
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
 +  { { case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_try") 2>&5
 +  ac_status=$?
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; }; }; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: program exited with status $ac_status" >&5
 +       $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
 +       ac_retval=$ac_status
 +fi
 +  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
 +} # ac_fn_c_try_run
 +
- /* Define $2 to an innocuous variant, in case <limits.h> declares $2.
-    For example, HP-UX 11i <limits.h> declares gettimeofday.  */
- #define $2 innocuous_$2
- 
- /* System header to define __stub macros and hopefully few prototypes,
-     which can conflict with char $2 (); below.
-     Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-     <limits.h> exists even on freestanding compilers.  */
- 
- #ifdef __STDC__
- # include <limits.h>
- #else
- # include <assert.h>
- #endif
- 
- #undef $2
- 
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char $2 ();
- /* The GNU C library defines this for functions which it implements
-     to always fail with ENOSYS.  Some functions are actually named
-     something starting with __ and the normal name is an alias.  */
- #if defined __stub_$2 || defined __stub___$2
- choke me
- #endif
- 
- int
- main ()
- {
- return $2 ();
-   ;
-   return 0;
- }
++# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
++# -------------------------------------------------------
++# Tests whether HEADER exists and can be compiled using the include files in
++# INCLUDES, setting the cache variable VAR accordingly.
++ac_fn_c_check_header_compile ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 +$as_echo_n "checking for $2... " >&6; }
 +if eval "test \"\${$3+set}\"" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
- if ac_fn_c_try_link "$LINENO"; then :
++$4
++#include <$2>
 +_ACEOF
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
++if ac_fn_c_try_compile "$LINENO"; then :
 +  eval "$3=yes"
 +else
 +  eval "$3=no"
 +fi
- 
- # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
- # -------------------------------------------------------
- # Tests whether HEADER exists, giving a warning if it cannot be compiled using
- # the include files in INCLUDES and setting the cache variable VAR
- # accordingly.
- ac_fn_c_check_header_mongrel ()
- {
-   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-   if eval "test \"\${$3+set}\"" = set; then :
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
- $as_echo_n "checking for $2... " >&6; }
- if eval "test \"\${$3+set}\"" = set; then :
-   $as_echo_n "(cached) " >&6
- fi
- eval ac_res=\$$3
-              { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
- $as_echo "$ac_res" >&6; }
- else
-   # Is the header compilable?
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
- $as_echo_n "checking $2 usability... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- $4
- #include <$2>
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_header_compiler=yes
- else
-   ac_header_compiler=no
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
- $as_echo "$ac_header_compiler" >&6; }
- 
- # Is the header present?
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
- $as_echo_n "checking $2 presence... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <$2>
- _ACEOF
- if ac_fn_c_try_cpp "$LINENO"; then :
-   ac_header_preproc=yes
- else
-   ac_header_preproc=no
- fi
- rm -f conftest.err conftest.i conftest.$ac_ext
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
- $as_echo "$ac_header_preproc" >&6; }
- 
- # So?  What about this header?
- case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
-   yes:no: )
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
- $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
- $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-     ;;
-   no:yes:* )
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
- $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
- $as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
- $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
- $as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
- $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ( $as_echo "## ---------------------------------------- ##
- ## Report this to bugs@project-moonshot.org ##
- ## ---------------------------------------- ##"
-      ) | sed "s/^/$as_me: WARNING:     /" >&2
-     ;;
- esac
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
- $as_echo_n "checking for $2... " >&6; }
- if eval "test \"\${$3+set}\"" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   eval "$3=\$ac_header_compiler"
- fi
- eval ac_res=\$$3
-              { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
- $as_echo "$ac_res" >&6; }
- fi
-   eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- 
- } # ac_fn_c_check_header_mongrel
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++eval ac_res=\$$3
++             { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
++$as_echo "$ac_res" >&6; }
++  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++
++} # ac_fn_c_check_header_compile
++
++# ac_fn_c_try_link LINENO
++# -----------------------
++# Try to link conftest.$ac_ext, and return whether this succeeded.
++ac_fn_c_try_link ()
++{
++  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++  rm -f conftest.$ac_objext conftest$ac_exeext
++  if { { ac_try="$ac_link"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_link") 2>conftest.err
++  ac_status=$?
++  if test -s conftest.err; then
++    grep -v '^ *+' conftest.err >conftest.er1
++    cat conftest.er1 >&5
++    mv -f conftest.er1 conftest.err
++  fi
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } && {
++       test -z "$ac_c_werror_flag" ||
++       test ! -s conftest.err
++       } && test -s conftest$ac_exeext && {
++       test "$cross_compiling" = yes ||
++       $as_test_x conftest$ac_exeext
++       }; then :
++  ac_retval=0
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++      ac_retval=1
++fi
++  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
++  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
++  # interfere with the next link command; also delete a directory that is
++  # left behind by Apple's compiler.  We do this before executing the actions.
++  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
++  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
++  as_fn_set_status $ac_retval
++
++} # ac_fn_c_try_link
++
++# ac_fn_c_check_func LINENO FUNC VAR
++# ----------------------------------
++# Tests whether FUNC exists, setting the cache variable VAR accordingly
++ac_fn_c_check_func ()
++{
++  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
++$as_echo_n "checking for $2... " >&6; }
++if eval "test \"\${$3+set}\"" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
++   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
++#define $2 innocuous_$2
++
++/* System header to define __stub macros and hopefully few prototypes,
++    which can conflict with char $2 (); below.
++    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++    <limits.h> exists even on freestanding compilers.  */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef $2
++
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char $2 ();
++/* The GNU C library defines this for functions which it implements
++    to always fail with ENOSYS.  Some functions are actually named
++    something starting with __ and the normal name is an alias.  */
++#if defined __stub_$2 || defined __stub___$2
++choke me
++#endif
++
++int
++main ()
++{
++return $2 ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  eval "$3=yes"
++else
++  eval "$3=no"
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
 +fi
 +eval ac_res=\$$3
 +             { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 +$as_echo "$ac_res" >&6; }
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +
 +} # ac_fn_c_check_func
 +
 +# ac_fn_cxx_try_compile LINENO
 +# ----------------------------
 +# Try to compile conftest.$ac_ext, and return whether this succeeded.
 +ac_fn_cxx_try_compile ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  rm -f conftest.$ac_objext
 +  if { { ac_try="$ac_compile"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_compile") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    grep -v '^ *+' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +    mv -f conftest.er1 conftest.err
 +  fi
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } && {
 +       test -z "$ac_cxx_werror_flag" ||
 +       test ! -s conftest.err
 +       } && test -s conftest.$ac_objext; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
 +      ac_retval=1
 +fi
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
 +} # ac_fn_cxx_try_compile
 +
 +# ac_fn_cxx_try_cpp LINENO
 +# ------------------------
 +# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
 +ac_fn_cxx_try_cpp ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  if { { ac_try="$ac_cpp conftest.$ac_ext"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    grep -v '^ *+' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +    mv -f conftest.er1 conftest.err
 +  fi
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } > conftest.i && {
 +       test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
 +       test ! -s conftest.err
 +       }; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
 +    ac_retval=1
 +fi
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
 +} # ac_fn_cxx_try_cpp
 +
 +# ac_fn_cxx_try_link LINENO
 +# -------------------------
 +# Try to link conftest.$ac_ext, and return whether this succeeded.
 +ac_fn_cxx_try_link ()
 +{
 +  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +  rm -f conftest.$ac_objext conftest$ac_exeext
 +  if { { ac_try="$ac_link"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_link") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    grep -v '^ *+' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +    mv -f conftest.er1 conftest.err
 +  fi
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } && {
 +       test -z "$ac_cxx_werror_flag" ||
 +       test ! -s conftest.err
 +       } && test -s conftest$ac_exeext && {
 +       test "$cross_compiling" = yes ||
 +       $as_test_x conftest$ac_exeext
 +       }; then :
 +  ac_retval=0
 +else
 +  $as_echo "$as_me: failed program was:" >&5
 +sed 's/^/| /' conftest.$ac_ext >&5
 +
 +      ac_retval=1
 +fi
 +  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
 +  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
 +  # interfere with the next link command; also delete a directory that is
 +  # left behind by Apple's compiler.  We do this before executing the actions.
 +  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
 +  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 +  as_fn_set_status $ac_retval
 +
 +} # ac_fn_cxx_try_link
- am__api_version='1.11'
 +cat >config.log <<_ACEOF
 +This file contains any messages produced by compilers while
 +running configure, to aid debugging if configure makes a mistake.
 +
 +It was created by mech_eap $as_me 0.1, which was
 +generated by GNU Autoconf 2.67.  Invocation command line was
 +
 +  $ $0 $@
 +
 +_ACEOF
 +exec 5>>config.log
 +{
 +cat <<_ASUNAME
 +## --------- ##
 +## Platform. ##
 +## --------- ##
 +
 +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
 +uname -m = `(uname -m) 2>/dev/null || echo unknown`
 +uname -r = `(uname -r) 2>/dev/null || echo unknown`
 +uname -s = `(uname -s) 2>/dev/null || echo unknown`
 +uname -v = `(uname -v) 2>/dev/null || echo unknown`
 +
 +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
 +/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
 +
 +/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 +/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
 +/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 +/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 +/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 +/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
 +
 +_ASUNAME
 +
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    $as_echo "PATH: $as_dir"
 +  done
 +IFS=$as_save_IFS
 +
 +} >&5
 +
 +cat >&5 <<_ACEOF
 +
 +
 +## ----------- ##
 +## Core tests. ##
 +## ----------- ##
 +
 +_ACEOF
 +
 +
 +# Keep a trace of the command line.
 +# Strip out --no-create and --no-recursion so they do not pile up.
 +# Strip out --silent because we don't want to record it for future runs.
 +# Also quote any args containing shell meta-characters.
 +# Make two passes to allow for proper duplicate-argument suppression.
 +ac_configure_args=
 +ac_configure_args0=
 +ac_configure_args1=
 +ac_must_keep_next=false
 +for ac_pass in 1 2
 +do
 +  for ac_arg
 +  do
 +    case $ac_arg in
 +    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
 +    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
 +    | -silent | --silent | --silen | --sile | --sil)
 +      continue ;;
 +    *\'*)
 +      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
 +    esac
 +    case $ac_pass in
 +    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
 +    2)
 +      as_fn_append ac_configure_args1 " '$ac_arg'"
 +      if test $ac_must_keep_next = true; then
 +      ac_must_keep_next=false # Got value, back to normal.
 +      else
 +      case $ac_arg in
 +        *=* | --config-cache | -C | -disable-* | --disable-* \
 +        | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
 +        | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
 +        | -with-* | --with-* | -without-* | --without-* | --x)
 +          case "$ac_configure_args0 " in
 +            "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
 +          esac
 +          ;;
 +        -* ) ac_must_keep_next=true ;;
 +      esac
 +      fi
 +      as_fn_append ac_configure_args " '$ac_arg'"
 +      ;;
 +    esac
 +  done
 +done
 +{ ac_configure_args0=; unset ac_configure_args0;}
 +{ ac_configure_args1=; unset ac_configure_args1;}
 +
 +# When interrupted or exit'd, cleanup temporary files, and complete
 +# config.log.  We remove comments because anyway the quotes in there
 +# would cause problems or look ugly.
 +# WARNING: Use '\'' to represent an apostrophe within the trap.
 +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 +trap 'exit_status=$?
 +  # Save into config.log some information that might help in debugging.
 +  {
 +    echo
 +
 +    $as_echo "## ---------------- ##
 +## Cache variables. ##
 +## ---------------- ##"
 +    echo
 +    # The following way of writing the cache mishandles newlines in values,
 +(
 +  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
 +    eval ac_val=\$$ac_var
 +    case $ac_val in #(
 +    *${as_nl}*)
 +      case $ac_var in #(
 +      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
 +      esac
 +      case $ac_var in #(
 +      _ | IFS | as_nl) ;; #(
 +      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
 +      *) { eval $ac_var=; unset $ac_var;} ;;
 +      esac ;;
 +    esac
 +  done
 +  (set) 2>&1 |
 +    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
 +    *${as_nl}ac_space=\ *)
 +      sed -n \
 +      "s/'\''/'\''\\\\'\'''\''/g;
 +        s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
 +      ;; #(
 +    *)
 +      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
 +      ;;
 +    esac |
 +    sort
 +)
 +    echo
 +
 +    $as_echo "## ----------------- ##
 +## Output variables. ##
 +## ----------------- ##"
 +    echo
 +    for ac_var in $ac_subst_vars
 +    do
 +      eval ac_val=\$$ac_var
 +      case $ac_val in
 +      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 +      esac
 +      $as_echo "$ac_var='\''$ac_val'\''"
 +    done | sort
 +    echo
 +
 +    if test -n "$ac_subst_files"; then
 +      $as_echo "## ------------------- ##
 +## File substitutions. ##
 +## ------------------- ##"
 +      echo
 +      for ac_var in $ac_subst_files
 +      do
 +      eval ac_val=\$$ac_var
 +      case $ac_val in
 +      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
 +      esac
 +      $as_echo "$ac_var='\''$ac_val'\''"
 +      done | sort
 +      echo
 +    fi
 +
 +    if test -s confdefs.h; then
 +      $as_echo "## ----------- ##
 +## confdefs.h. ##
 +## ----------- ##"
 +      echo
 +      cat confdefs.h
 +      echo
 +    fi
 +    test "$ac_signal" != 0 &&
 +      $as_echo "$as_me: caught signal $ac_signal"
 +    $as_echo "$as_me: exit $exit_status"
 +  } >&5
 +  rm -f core *.core core.conftest.* &&
 +    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
 +    exit $exit_status
 +' 0
 +for ac_signal in 1 2 13 15; do
 +  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
 +done
 +ac_signal=0
 +
 +# confdefs.h avoids OS command line length limits that DEFS can exceed.
 +rm -f -r conftest* confdefs.h
 +
 +$as_echo "/* confdefs.h */" > confdefs.h
 +
 +# Predefined preprocessor variables.
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_NAME "$PACKAGE_NAME"
 +_ACEOF
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
 +_ACEOF
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_VERSION "$PACKAGE_VERSION"
 +_ACEOF
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_STRING "$PACKAGE_STRING"
 +_ACEOF
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
 +_ACEOF
 +
 +cat >>confdefs.h <<_ACEOF
 +#define PACKAGE_URL "$PACKAGE_URL"
 +_ACEOF
 +
 +
 +# Let the site file select an alternate cache file if it wants to.
 +# Prefer an explicitly selected file to automatically selected ones.
 +ac_site_file1=NONE
 +ac_site_file2=NONE
 +if test -n "$CONFIG_SITE"; then
 +  # We do not want a PATH search for config.site.
 +  case $CONFIG_SITE in #((
 +    -*)  ac_site_file1=./$CONFIG_SITE;;
 +    */*) ac_site_file1=$CONFIG_SITE;;
 +    *)   ac_site_file1=./$CONFIG_SITE;;
 +  esac
 +elif test "x$prefix" != xNONE; then
 +  ac_site_file1=$prefix/share/config.site
 +  ac_site_file2=$prefix/etc/config.site
 +else
 +  ac_site_file1=$ac_default_prefix/share/config.site
 +  ac_site_file2=$ac_default_prefix/etc/config.site
 +fi
 +for ac_site_file in "$ac_site_file1" "$ac_site_file2"
 +do
 +  test "x$ac_site_file" = xNONE && continue
 +  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 +$as_echo "$as_me: loading site script $ac_site_file" >&6;}
 +    sed 's/^/| /' "$ac_site_file" >&5
 +    . "$ac_site_file" \
 +      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 +as_fn_error $? "failed to load site script $ac_site_file
 +See \`config.log' for more details" "$LINENO" 5 ; }
 +  fi
 +done
 +
 +if test -r "$cache_file"; then
 +  # Some versions of bash will fail to source /dev/null (special files
 +  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
 +  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
 +$as_echo "$as_me: loading cache $cache_file" >&6;}
 +    case $cache_file in
 +      [\\/]* | ?:[\\/]* ) . "$cache_file";;
 +      *)                      . "./$cache_file";;
 +    esac
 +  fi
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
 +$as_echo "$as_me: creating cache $cache_file" >&6;}
 +  >$cache_file
 +fi
 +
 +# Check that the precious variables saved in the cache have kept the same
 +# value.
 +ac_cache_corrupted=false
 +for ac_var in $ac_precious_vars; do
 +  eval ac_old_set=\$ac_cv_env_${ac_var}_set
 +  eval ac_new_set=\$ac_env_${ac_var}_set
 +  eval ac_old_val=\$ac_cv_env_${ac_var}_value
 +  eval ac_new_val=\$ac_env_${ac_var}_value
 +  case $ac_old_set,$ac_new_set in
 +    set,)
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
 +      ac_cache_corrupted=: ;;
 +    ,set)
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
 +      ac_cache_corrupted=: ;;
 +    ,);;
 +    *)
 +      if test "x$ac_old_val" != "x$ac_new_val"; then
 +      # differences in whitespace do not lead to failure.
 +      ac_old_val_w=`echo x $ac_old_val`
 +      ac_new_val_w=`echo x $ac_new_val`
 +      if test "$ac_old_val_w" != "$ac_new_val_w"; then
 +        { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
 +        ac_cache_corrupted=:
 +      else
 +        { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
 +        eval $ac_var=\$ac_old_val
 +      fi
 +      { $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
 +$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
 +      { $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
 +$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
 +      fi;;
 +  esac
 +  # Pass precious variables to config.status.
 +  if test "$ac_new_set" = set; then
 +    case $ac_new_val in
 +    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
 +    *) ac_arg=$ac_var=$ac_new_val ;;
 +    esac
 +    case " $ac_configure_args " in
 +      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
 +      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
 +    esac
 +  fi
 +done
 +if $ac_cache_corrupted; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
 +  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 +fi
 +## -------------------- ##
 +## Main body of script. ##
 +## -------------------- ##
 +
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +
- for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
 +
 +ac_aux_dir=
-   as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
++for ac_dir in build-aux "$srcdir"/build-aux; do
 +  if test -f "$ac_dir/install-sh"; then
 +    ac_aux_dir=$ac_dir
 +    ac_install_sh="$ac_aux_dir/install-sh -c"
 +    break
 +  elif test -f "$ac_dir/install.sh"; then
 +    ac_aux_dir=$ac_dir
 +    ac_install_sh="$ac_aux_dir/install.sh -c"
 +    break
 +  elif test -f "$ac_dir/shtool"; then
 +    ac_aux_dir=$ac_dir
 +    ac_install_sh="$ac_aux_dir/shtool install -c"
 +    break
 +  fi
 +done
 +if test -z "$ac_aux_dir"; then
- # Find a good install program.  We prefer a C program (faster),
- # so one script is as good as another.  But avoid the broken or
- # incompatible versions:
- # SysV /etc/install, /usr/sbin/install
- # SunOS /usr/etc/install
- # IRIX /sbin/install
- # AIX /bin/install
- # AmigaOS /C/install, which installs bootblocks on floppy discs
- # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
- # AFS /usr/afsws/bin/install, which mishandles nonexistent args
- # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
- # OS/2's system install, which has a completely different semantic
- # ./install, which can be erroneously created by make from ./install.sh.
- # Reject install programs that cannot install multiple files.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
- $as_echo_n "checking for a BSD-compatible install... " >&6; }
- if test -z "$INSTALL"; then
- if test "${ac_cv_path_install+set}" = set; then :
++  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
 +fi
 +
 +# These three variables are undocumented and unsupported,
 +# and are intended to be withdrawn in a future Autoconf release.
 +# They can cause serious problems if a builder's source tree is in a directory
 +# whose full name contains unusual characters.
 +ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
 +ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
 +ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 +
 +
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     # Account for people who put trailing slashes in PATH elements.
- case $as_dir/ in #((
-   ./ | .// | /[cC]/* | \
-   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-   ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
-   /usr/ucb/* ) ;;
-   *)
-     # OSF1 and SCO ODT 3.0 have their own names for install.
-     # Don't use installbsd from OSF since it installs stuff as root
-     # by default.
-     for ac_prog in ginstall scoinst install; do
-       for ac_exec_ext in '' $ac_executable_extensions; do
-       if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-         if test $ac_prog = install &&
-           grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-           # AIX install.  It has an incompatible calling convention.
-           :
-         elif test $ac_prog = install &&
-           grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-           # program-specific install script used by HP pwplus--don't use.
-           :
-         else
-           rm -rf conftest.one conftest.two conftest.dir
-           echo one > conftest.one
-           echo two > conftest.two
-           mkdir conftest.dir
-           if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-             test -s conftest.one && test -s conftest.two &&
-             test -s conftest.dir/conftest.one &&
-             test -s conftest.dir/conftest.two
-           then
-             ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-             break 3
-           fi
-         fi
-       fi
-       done
-     done
-     ;;
- esac
- 
++  if test -n "$CC"; then
++  ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
- rm -rf conftest.one conftest.two conftest.dir
- 
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_CC="${ac_tool_prefix}gcc"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
 +IFS=$as_save_IFS
 +
-   if test "${ac_cv_path_install+set}" = set; then
-     INSTALL=$ac_cv_path_install
-   else
-     # As a last resort, use the slow shell script.  Don't cache a
-     # value for INSTALL within a source directory, because that will
-     # break other packages using the cache if that directory is
-     # removed, or if the value is a relative name.
-     INSTALL=$ac_install_sh
-   fi
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
- $as_echo "$INSTALL" >&6; }
- 
- # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
- # It thinks the first close brace ends the variable substitution.
- test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
- 
- test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
- 
- test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
- $as_echo_n "checking whether build environment is sane... " >&6; }
- # Just in case
- sleep 1
- echo timestamp > conftest.file
- # Reject unsafe characters in $srcdir or the absolute working directory
- # name.  Accept space and tab only in the latter.
- am_lf='
- '
- case `pwd` in
-   *[\\\"\#\$\&\'\`$am_lf]*)
-     as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
- esac
- case $srcdir in
-   *[\\\"\#\$\&\'\`$am_lf\ \   ]*)
-     as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
- esac
- 
- # Do `set' in a subshell so we don't clobber the current shell's
- # arguments.  Must try -L first in case configure is actually a
- # symlink; some systems play weird games with the mod time of symlinks
- # (eg FreeBSD returns the mod time of the symlink's containing
- # directory).
- if (
-    set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-    if test "$*" = "X"; then
-       # -L didn't work.
-       set X `ls -t "$srcdir/configure" conftest.file`
-    fi
-    rm -f conftest.file
-    if test "$*" != "X $srcdir/configure conftest.file" \
-       && test "$*" != "X conftest.file $srcdir/configure"; then
- 
-       # If neither matched, then we have a broken ls.  This can happen
-       # if, for instance, CONFIG_SHELL is bash and it inherits a
-       # broken ls alias from the environment.  This has actually
-       # happened.  Such a system could not be considered "sane".
-       as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
- alias in your environment" "$LINENO" 5
-    fi
- 
-    test "$2" = conftest.file
-    )
- then
-    # Ok.
-    :
 +fi
-    as_fn_error $? "newly created file is older than distributed files!
- Check your system clock" "$LINENO" 5
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
- test "$program_prefix" != NONE &&
-   program_transform_name="s&^&$program_prefix&;$program_transform_name"
- # Use a double $ so make ignores it.
- test "$program_suffix" != NONE &&
-   program_transform_name="s&\$&$program_suffix&;$program_transform_name"
- # Double any \ or $.
- # By default was `s,x,x', remove it if useless.
- ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
- program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
 +fi
- # expand $ac_aux_dir to an absolute path
- am_aux_dir=`cd $ac_aux_dir && pwd`
- 
- if test x"${MISSING+set}" != xset; then
-   case $am_aux_dir in
-   *\ * | *\   *)
-     MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-   *)
-     MISSING="\${SHELL} $am_aux_dir/missing" ;;
-   esac
- fi
- # Use eval to expand $SHELL
- if eval "$MISSING --run true"; then
-   am_missing_run="$MISSING --run "
- else
-   am_missing_run=
-   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
- $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
- fi
 +
- if test x"${install_sh}" != xset; then
-   case $am_aux_dir in
-   *\ * | *\   *)
-     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-   *)
-     install_sh="\${SHELL} $am_aux_dir/install-sh"
-   esac
 +
- 
- # Installed binaries are usually stripped using `strip' when the user
- # run `make install-strip'.  However `strip' might not be the right
- # tool to use in cross-compilation environments, therefore Automake
- # will honor the `STRIP' environment variable to overrule this program.
- if test "$cross_compiling" != no; then
-   if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
 +fi
- if test "${ac_cv_prog_STRIP+set}" = set; then :
++if test -z "$ac_cv_prog_CC"; then
++  ac_ct_CC=$CC
++  # Extract the first word of "gcc", so it can be a program name with args.
++set dummy gcc; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$STRIP"; then
-   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++  if test -n "$ac_ct_CC"; then
++  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
- $as_echo "$STRIP" >&6; }
++    ac_cv_prog_ac_ct_CC="gcc"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
- 
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
- if test -z "$ac_cv_prog_STRIP"; then
-   ac_ct_STRIP=$STRIP
-   # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
++  if test "x$ac_ct_CC" = x; then
++    CC=""
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    CC=$ac_ct_CC
++  fi
++else
++  CC="$ac_cv_prog_CC"
 +fi
- if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
++
++if test -z "$CC"; then
++          if test -n "$ac_tool_prefix"; then
++    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$ac_ct_STRIP"; then
-   ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++if test "${ac_cv_prog_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_ac_ct_STRIP="strip"
++  if test -n "$CC"; then
++  ac_cv_prog_CC="$CC" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
- if test -n "$ac_ct_STRIP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
- $as_echo "$ac_ct_STRIP" >&6; }
++    ac_cv_prog_CC="${ac_tool_prefix}cc"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
-   if test "x$ac_ct_STRIP" = x; then
-     STRIP=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     STRIP=$ac_ct_STRIP
-   fi
- else
-   STRIP="$ac_cv_prog_STRIP"
- fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
- INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
- $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
- if test -z "$MKDIR_P"; then
-   if test "${ac_cv_path_mkdir+set}" = set; then :
 +
++  fi
 +fi
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
++if test -z "$CC"; then
++  # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     for ac_prog in mkdir gmkdir; do
-        for ac_exec_ext in '' $ac_executable_extensions; do
-          { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-          case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-            'mkdir (GNU coreutils) '* | \
-            'mkdir (coreutils) '* | \
-            'mkdir (fileutils) '4.1*)
-              ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-              break 3;;
-          esac
-        done
-        done
++  if test -n "$CC"; then
++  ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++  ac_prog_rejected=no
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
- fi
- 
-   test -d ./--version && rmdir ./--version
-   if test "${ac_cv_path_mkdir+set}" = set; then
-     MKDIR_P="$ac_cv_path_mkdir -p"
-   else
-     # As a last resort, use the slow shell script.  Don't cache a
-     # value for MKDIR_P within a source directory, because that will
-     # break other packages using the cache if that directory is
-     # removed, or if the value is a relative name.
-     MKDIR_P="$ac_install_sh -d"
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
++       ac_prog_rejected=yes
++       continue
++     fi
++    ac_cv_prog_CC="cc"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
 +IFS=$as_save_IFS
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
- $as_echo "$MKDIR_P" >&6; }
++if test $ac_prog_rejected = yes; then
++  # We found a bogon in the path, so make sure we never use it.
++  set dummy $ac_cv_prog_CC
++  shift
++  if test $# != 0; then
++    # We chose a different compiler from the bogus one.
++    # However, it has the same basename, so the bogon will be chosen
++    # first if we set CC to just the basename; use the full file name.
++    shift
++    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
 +  fi
 +fi
- mkdir_p="$MKDIR_P"
- case $mkdir_p in
-   [\\/$]* | ?:[\\/]*) ;;
-   */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
- esac
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
- for ac_prog in gawk mawk nawk awk
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
 +
- if test "${ac_cv_prog_AWK+set}" = set; then :
++fi
++if test -z "$CC"; then
++  if test -n "$ac_tool_prefix"; then
++  for ac_prog in cl.exe
++  do
++    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$AWK"; then
-   ac_cv_prog_AWK="$AWK" # Let the user override the test.
++if test "${ac_cv_prog_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_AWK="$ac_prog"
++  if test -n "$CC"; then
++  ac_cv_prog_CC="$CC" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- AWK=$ac_cv_prog_AWK
- if test -n "$AWK"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
- $as_echo "$AWK" >&6; }
++    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
-   test -n "$AWK" && break
- done
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
- $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
- set x ${MAKE-make}
- ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
- if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
++$as_echo "$CC" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
-   cat >conftest.make <<\_ACEOF
- SHELL = /bin/sh
- all:
-       @echo '@@@%%%=$(MAKE)=@@@%%%'
- _ACEOF
- # GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
- case `${MAKE-make} -f conftest.make 2>/dev/null` in
-   *@@@%%%=?*=@@@%%%*)
-     eval ac_cv_prog_make_${ac_make}_set=yes;;
-   *)
-     eval ac_cv_prog_make_${ac_make}_set=no;;
- esac
- rm -f conftest.make
++    test -n "$CC" && break
++  done
++fi
++if test -z "$CC"; then
++  ac_ct_CC=$CC
++  for ac_prog in cl.exe
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
-   SET_MAKE=
++  if test -n "$ac_ct_CC"; then
++  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_CC="$ac_prog"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
++
 +fi
-   SET_MAKE="MAKE=${MAKE-make}"
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
++$as_echo "$ac_ct_CC" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
- rm -rf .tst 2>/dev/null
- mkdir .tst 2>/dev/null
- if test -d .tst; then
-   am__leading_dot=.
- else
-   am__leading_dot=_
- fi
- rmdir .tst 2>/dev/null
 +fi
 +
- if test "`cd $srcdir && pwd`" != "`pwd`"; then
-   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-   # is not polluted with repeated "-I."
-   am__isrc=' -I$(srcdir)'
-   # test to see if srcdir already configured
-   if test -f $srcdir/config.status; then
-     as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
-   fi
- fi
 +
- # test whether we have cygpath
- if test -z "$CYGPATH_W"; then
-   if (cygpath --version) >/dev/null 2>/dev/null; then
-     CYGPATH_W='cygpath -w'
++  test -n "$ac_ct_CC" && break
++done
 +
-     CYGPATH_W=echo
++  if test "x$ac_ct_CC" = x; then
++    CC=""
 +  else
- 
- # Define the identity of the package.
-  PACKAGE='mech_eap'
-  VERSION='0.1'
- 
- 
- cat >>confdefs.h <<_ACEOF
- #define PACKAGE "$PACKAGE"
- _ACEOF
- 
- 
- cat >>confdefs.h <<_ACEOF
- #define VERSION "$VERSION"
- _ACEOF
- 
- # Some tools Automake needs.
- 
- ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    CC=$ac_ct_CC
 +  fi
 +fi
 +
- AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++fi
 +
 +
- AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "no acceptable C compiler found in \$PATH
++See \`config.log' for more details" "$LINENO" 5 ; }
 +
++# Provide some information about the compiler.
++$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
++set X $ac_compile
++ac_compiler=$2
++for ac_option in --version -v -V -qversion; do
++  { { ac_try="$ac_compiler $ac_option >&5"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
++  ac_status=$?
++  if test -s conftest.err; then
++    sed '10a\
++... rest of stderr output deleted ...
++         10q' conftest.err >conftest.er1
++    cat conftest.er1 >&5
++  fi
++  rm -f conftest.er1 conftest.err
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }
++done
 +
- AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
- MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++  ;
++  return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
++$as_echo_n "checking whether the C compiler works... " >&6; }
++ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 +
++# The possible output files:
++ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
 +
- # We need awk for the "check" target.  The system "awk" is bad on
- # some platforms.
- # Always define AMTAR for backward compatibility.
- 
- AMTAR=${AMTAR-"${am_missing_run}tar"}
- 
- am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
- 
- 
- 
- 
- 
- 
- case `pwd` in
-   *\ * | *\   *)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
- $as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
++ac_rmfiles=
++for ac_file in $ac_files
++do
++  case $ac_file in
++    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
++  esac
++done
++rm -f $ac_rmfiles
 +
- macro_version='2.2.6b'
- macro_revision='1.3017'
- 
- 
- 
- 
- 
- 
- 
- 
- 
++if { { ac_try="$ac_link_default"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
 +esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_link_default") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then :
++  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
++# in a Makefile.  We should not override ac_cv_exeext if it was cached,
++# so that the user can short-circuit this test for compilers unknown to
++# Autoconf.
++for ac_file in $ac_files ''
++do
++  test -f "$ac_file" || continue
++  case $ac_file in
++    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
++      ;;
++    [ab].out )
++      # We found the default executable, but exeext='' is most
++      # certainly right.
++      break;;
++    *.* )
++      if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
++      then :; else
++         ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++      fi
++      # We set ac_cv_exeext here because the later test for it is not
++      # safe: cross compilers may not add the suffix if given an `-o'
++      # argument, so we may need to know it at that point already.
++      # Even if this section looks crufty: it has the advantage of
++      # actually working.
++      break;;
++    * )
++      break;;
++  esac
++done
++test "$ac_cv_exeext" = no && ac_cv_exeext=
 +
++else
++  ac_file=''
++fi
++if test -z "$ac_file"; then :
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++$as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
 +
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error 77 "C compiler cannot create executables
++See \`config.log' for more details" "$LINENO" 5 ; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
++$as_echo_n "checking for C compiler default output file name... " >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
++$as_echo "$ac_file" >&6; }
++ac_exeext=$ac_cv_exeext
 +
- ltmain="$ac_aux_dir/ltmain.sh"
++rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
++$as_echo_n "checking for suffix of executables... " >&6; }
++if { { ac_try="$ac_link"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_link") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then :
++  # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in conftest.exe conftest conftest.*; do
++  test -f "$ac_file" || continue
++  case $ac_file in
++    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
++    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++        break;;
++    * ) break;;
++  esac
++done
++else
++  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details" "$LINENO" 5 ; }
++fi
++rm -f conftest conftest$ac_cv_exeext
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
++$as_echo "$ac_cv_exeext" >&6; }
 +
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <stdio.h>
++int
++main ()
++{
++FILE *f = fopen ("conftest.out", "w");
++ return ferror (f) || fclose (f) != 0;
 +
++  ;
++  return 0;
++}
++_ACEOF
++ac_clean_files="$ac_clean_files conftest.out"
++# Check that the compiler produces executables we can run.  If not, either
++# the compiler is broken, or we cross compile.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
++$as_echo_n "checking whether we are cross compiling... " >&6; }
++if test "$cross_compiling" != yes; then
++  { { ac_try="$ac_link"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_link") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }
++  if { ac_try='./conftest$ac_cv_exeext'
++  { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; }; then
++    cross_compiling=no
++  else
++    if test "$cross_compiling" = maybe; then
++      cross_compiling=yes
++    else
++      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details" "$LINENO" 5 ; }
++    fi
++  fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
++$as_echo "$cross_compiling" >&6; }
 +
++rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
++ac_clean_files=$ac_clean_files_save
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
++$as_echo_n "checking for suffix of object files... " >&6; }
++if test "${ac_cv_objext+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
- # Make sure we can run config.sub.
- $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-   as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
++int
++main ()
++{
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
- $as_echo_n "checking build system type... " >&6; }
- if test "${ac_cv_build+set}" = set; then :
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { { ac_try="$ac_compile"
++case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_compile") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then :
++  for ac_file in conftest.o conftest.obj conftest.*; do
++  test -f "$ac_file" || continue;
++  case $ac_file in
++    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
++    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++       break;;
++  esac
++done
++else
++  $as_echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
 +
-   ac_build_alias=$build_alias
- test "x$ac_build_alias" = x &&
-   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
- test "x$ac_build_alias" = x &&
-   as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
- ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-   as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
- 
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
- $as_echo "$ac_cv_build" >&6; }
- case $ac_cv_build in
- *-*-*) ;;
- *) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
- esac
- build=$ac_cv_build
- ac_save_IFS=$IFS; IFS='-'
- set x $ac_cv_build
- shift
- build_cpu=$1
- build_vendor=$2
- shift; shift
- # Remember, the first character of IFS is used to create $*,
- # except with old shells:
- build_os=$*
- IFS=$ac_save_IFS
- case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
++{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "cannot compute suffix of object files: cannot compile
++See \`config.log' for more details" "$LINENO" 5 ; }
++fi
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
++$as_echo "$ac_cv_objext" >&6; }
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
++$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
++if test "${ac_cv_c_compiler_gnu+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
- $as_echo_n "checking host system type... " >&6; }
- if test "${ac_cv_host+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test "x$host_alias" = x; then
-   ac_cv_host=$ac_cv_build
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
++#ifndef __GNUC__
++       choke me
++#endif
 +
-   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-     as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++  ac_compiler_gnu=yes
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
- $as_echo "$ac_cv_host" >&6; }
- case $ac_cv_host in
- *-*-*) ;;
- *) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
- esac
- host=$ac_cv_host
- ac_save_IFS=$IFS; IFS='-'
- set x $ac_cv_host
- shift
- host_cpu=$1
- host_vendor=$2
- shift; shift
- # Remember, the first character of IFS is used to create $*,
- # except with old shells:
- host_os=$*
- IFS=$ac_save_IFS
- case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
- 
- 
- DEPDIR="${am__leading_dot}deps"
- 
- ac_config_commands="$ac_config_commands depfiles"
- 
- 
- am_make=${MAKE-make}
- cat > confinc << 'END'
- am__doit:
-       @echo this is the am__doit target
- .PHONY: am__doit
- END
- # If we don't find an include directive, just comment out the code.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
- $as_echo_n "checking for style of include used by $am_make... " >&6; }
- am__include="#"
- am__quote=
- _am_result=none
- # First try GNU make style include.
- echo "include confinc" > confmf
- # Ignore all kinds of additional output from `make'.
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
-   am__include=include
-   am__quote=
-   _am_result=GNU
-   ;;
- esac
- # Now try BSD make style include.
- if test "$am__include" = "#"; then
-    echo '.include "confinc"' > confmf
-    case `$am_make -s -f confmf 2> /dev/null` in #(
-    *the\ am__doit\ target*)
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-      ;;
-    esac
++  ac_compiler_gnu=no
 +fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
 +
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
- $as_echo "$_am_result" >&6; }
- rm -f confinc confmf
- 
- # Check whether --enable-dependency-tracking was given.
- if test "${enable_dependency_tracking+set}" = set; then :
-   enableval=$enable_dependency_tracking;
- fi
- 
- if test "x$enable_dependency_tracking" != xno; then
-   am_depcomp="$ac_aux_dir/depcomp"
-   AMDEPBACKSLASH='\'
- fi
-  if test "x$enable_dependency_tracking" != xno; then
-   AMDEP_TRUE=
-   AMDEP_FALSE='#'
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
++$as_echo "$ac_cv_c_compiler_gnu" >&6; }
++if test $ac_compiler_gnu = yes; then
++  GCC=yes
++else
++  GCC=
 +fi
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
++$as_echo_n "checking whether $CC accepts -g... " >&6; }
++if test "${ac_cv_prog_cc_g+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_save_c_werror_flag=$ac_c_werror_flag
++   ac_c_werror_flag=yes
++   ac_cv_prog_cc_g=no
++   CFLAGS="-g"
++   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
-   AMDEP_TRUE='#'
-   AMDEP_FALSE=
- fi
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++  ac_cv_prog_cc_g=yes
 +else
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  CFLAGS=""
++      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
- fi
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +else
- if test -z "$ac_cv_prog_CC"; then
-   ac_ct_CC=$CC
-   # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_CC"; then
-   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="gcc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
- 
++  ac_c_werror_flag=$ac_save_c_werror_flag
++       CFLAGS="-g"
++       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++  ac_cv_prog_cc_g=yes
 +fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
- 
-   if test "x$ac_ct_CC" = x; then
-     CC=""
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++   ac_c_werror_flag=$ac_save_c_werror_flag
 +fi
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     CC=$ac_ct_CC
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
++$as_echo "$ac_cv_prog_cc_g" >&6; }
++if test "$ac_test_CFLAGS" = set; then
++  CFLAGS=$ac_save_CFLAGS
++elif test $ac_cv_prog_cc_g = yes; then
++  if test "$GCC" = yes; then
++    CFLAGS="-g -O2"
 +  else
-   CC="$ac_cv_prog_CC"
++    CFLAGS="-g"
 +  fi
 +else
- 
- if test -z "$CC"; then
-           if test -n "$ac_tool_prefix"; then
-     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
++  if test "$GCC" = yes; then
++    CFLAGS="-O2"
++  else
++    CFLAGS=
++  fi
 +fi
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
++$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
++if test "${ac_cv_prog_cc_c89+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}cc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
++  ac_cv_prog_cc_c89=no
++ac_save_CC=$CC
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <stdarg.h>
++#include <stdio.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++     char **p;
++     int i;
++{
++  return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++  char *s;
++  va_list v;
++  va_start (v,p);
++  s = g (p, va_arg (v,int));
++  va_end (v);
++  return s;
++}
++
++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
++   function prototypes and stuff, but not '\xHH' hex character constants.
++   These don't provoke an error unfortunately, instead are silently treated
++   as 'x'.  The following induces an error, until -std is added to get
++   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
++   array size at least.  It's necessary to write '\x00'==0 to get something
++   that's true only with -std.  */
++int osf4_cc_array ['\x00' == 0 ? 1 : -1];
++
++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
++   inside strings and character constants.  */
++#define FOO(x) 'x'
++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
++
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
++  ;
++  return 0;
++}
++_ACEOF
++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
++      -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 +do
-   done
- IFS=$as_save_IFS
++  CC="$ac_save_CC $ac_arg"
++  if ac_fn_c_try_compile "$LINENO"; then :
++  ac_cv_prog_cc_c89=$ac_arg
++fi
++rm -f core conftest.err conftest.$ac_objext
++  test "x$ac_cv_prog_cc_c89" != "xno" && break
 +done
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++rm -f conftest.$ac_ext
++CC=$ac_save_CC
 +
 +fi
++# AC_CACHE_VAL
++case "x$ac_cv_prog_cc_c89" in
++  x)
++    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
++$as_echo "none needed" >&6; } ;;
++  xno)
++    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
++$as_echo "unsupported" >&6; } ;;
++  *)
++    CC="$CC $ac_cv_prog_cc_c89"
++    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
++$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
++esac
++if test "x$ac_cv_prog_cc_c89" != xno; then :
++
 +fi
-   fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +
- if test -z "$CC"; then
-   # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
++$as_echo_n "checking how to run the C preprocessor... " >&6; }
++# On Suns, sometimes $CPP names a directory.
++if test -n "$CPP" && test -d "$CPP"; then
++  CPP=
 +fi
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-   ac_prog_rejected=no
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
++if test -z "$CPP"; then
++  if test "${ac_cv_prog_CPP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-        continue
-      fi
-     ac_cv_prog_CC="cc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++      # Double quotes because CPP needs to be expanded
++    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++    do
++      ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
 +do
- if test $ac_prog_rejected = yes; then
-   # We found a bogon in the path, so make sure we never use it.
-   set dummy $ac_cv_prog_CC
-   shift
-   if test $# != 0; then
-     # We chose a different compiler from the bogus one.
-     # However, it has the same basename, so the bogon will be chosen
-     # first if we set CC to just the basename; use the full file name.
-     shift
-     ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-   fi
- fi
- fi
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++                   Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
 +
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
++else
++  # Broken: fails on valid input.
++continue
 +fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether nonexistent headers
++  # can be detected and how.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++  # Broken: success on invalid input.
++continue
 +else
- if test -z "$CC"; then
-   if test -n "$ac_tool_prefix"; then
-   for ac_prog in cl.exe
-   do
-     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
++  # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
++  break
 +fi
 +
++    done
++    ac_cv_prog_CPP=$CPP
 +
 +fi
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
++  CPP=$ac_cv_prog_CPP
 +else
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  ac_cv_prog_CPP=$CPP
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
++$as_echo "$CPP" >&6; }
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
 +do
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++                   Syntax error
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
 +
++else
++  # Broken: fails on valid input.
++continue
 +fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++rm -f conftest.err conftest.i conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether nonexistent headers
++  # can be detected and how.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if ac_fn_c_try_cpp "$LINENO"; then :
++  # Broken: success on invalid input.
++continue
 +else
-     test -n "$CC" && break
-   done
++  # Passes both tests.
++ac_preproc_ok=:
++break
 +fi
++rm -f conftest.err conftest.i conftest.$ac_ext
 +
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.i conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then :
 +
- if test -z "$CC"; then
-   ac_ct_CC=$CC
-   for ac_prog in cl.exe
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
++else
++  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
++$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
++as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details" "$LINENO" 5 ; }
 +fi
-   if test -n "$ac_ct_CC"; then
-   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
++$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
++if test "${ac_cv_path_GREP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
++  if test -z "$GREP"; then
++  ac_path_GREP_found=false
++  # Loop through the user's path and test for each of PROGNAME-LIST
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
++    for ac_prog in grep ggrep; do
 +    for ac_exec_ext in '' $ac_executable_extensions; do
- IFS=$as_save_IFS
++      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
++      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
++# Check for GNU ac_path_GREP and select it if it is found.
++  # Check for GNU $ac_path_GREP
++case `"$ac_path_GREP" --version 2>&1` in
++*GNU*)
++  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
++*)
++  ac_count=0
++  $as_echo_n 0123456789 >"conftest.in"
++  while :
++  do
++    cat "conftest.in" "conftest.in" >"conftest.tmp"
++    mv "conftest.tmp" "conftest.in"
++    cp "conftest.in" "conftest.nl"
++    $as_echo 'GREP' >> "conftest.nl"
++    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++    as_fn_arith $ac_count + 1 && ac_count=$as_val
++    if test $ac_count -gt ${ac_path_GREP_max-0}; then
++      # Best one so far, save it but keep looking for a better one
++      ac_cv_path_GREP="$ac_path_GREP"
++      ac_path_GREP_max=$ac_count
++    fi
++    # 10*(2^10) chars as input seems more than enough
++    test $ac_count -gt 10 && break
 +  done
- fi
- fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
++  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++      $ac_path_GREP_found && break 3
++    done
++  done
++  done
++IFS=$as_save_IFS
++  if test -z "$ac_cv_path_GREP"; then
++    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
++  fi
 +else
-   test -n "$ac_ct_CC" && break
- done
++  ac_cv_path_GREP=$GREP
 +fi
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
++$as_echo "$ac_cv_path_GREP" >&6; }
++ GREP="$ac_cv_path_GREP"
 +
-   if test "x$ac_ct_CC" = x; then
-     CC=""
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
 +
-     CC=$ac_ct_CC
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
++$as_echo_n "checking for egrep... " >&6; }
++if test "${ac_cv_path_EGREP+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
++   then ac_cv_path_EGREP="$GREP -E"
++   else
++     if test -z "$EGREP"; then
++  ac_path_EGREP_found=false
++  # Loop through the user's path and test for each of PROGNAME-LIST
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_prog in egrep; do
++    for ac_exec_ext in '' $ac_executable_extensions; do
++      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
++      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
++# Check for GNU ac_path_EGREP and select it if it is found.
++  # Check for GNU $ac_path_EGREP
++case `"$ac_path_EGREP" --version 2>&1` in
++*GNU*)
++  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
++*)
++  ac_count=0
++  $as_echo_n 0123456789 >"conftest.in"
++  while :
++  do
++    cat "conftest.in" "conftest.in" >"conftest.tmp"
++    mv "conftest.tmp" "conftest.in"
++    cp "conftest.in" "conftest.nl"
++    $as_echo 'EGREP' >> "conftest.nl"
++    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
++    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++    as_fn_arith $ac_count + 1 && ac_count=$as_val
++    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
++      # Best one so far, save it but keep looking for a better one
++      ac_cv_path_EGREP="$ac_path_EGREP"
++      ac_path_EGREP_max=$ac_count
++    fi
++    # 10*(2^10) chars as input seems more than enough
++    test $ac_count -gt 10 && break
++  done
++  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 +esac
- test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "no acceptable C compiler found in \$PATH
- See \`config.log' for more details" "$LINENO" 5 ; }
- 
- # Provide some information about the compiler.
- $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
- set X $ac_compile
- ac_compiler=$2
- for ac_option in --version -v -V -qversion; do
-   { { ac_try="$ac_compiler $ac_option >&5"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-   ac_status=$?
-   if test -s conftest.err; then
-     sed '10a\
- ... rest of stderr output deleted ...
-          10q' conftest.err >conftest.er1
-     cat conftest.er1 >&5
-   fi
-   rm -f conftest.er1 conftest.err
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }
- done
- 
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
++
++      $ac_path_EGREP_found && break 3
++    done
++  done
++  done
++IFS=$as_save_IFS
++  if test -z "$ac_cv_path_EGREP"; then
++    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
 +  fi
++else
++  ac_cv_path_EGREP=$EGREP
 +fi
 +
++   fi
 +fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
++$as_echo "$ac_cv_path_EGREP" >&6; }
++ EGREP="$ac_cv_path_EGREP"
 +
 +
- ac_clean_files_save=$ac_clean_files
- ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
- # Try to create an executable without -o first, disregard a.out.
- # It will help us diagnose broken compilers, and finding out an intuition
- # of exeext.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
- $as_echo_n "checking whether the C compiler works... " >&6; }
- ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
- 
- # The possible output files:
- ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
- 
- ac_rmfiles=
- for ac_file in $ac_files
- do
-   case $ac_file in
-     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-     * ) ac_rmfiles="$ac_rmfiles $ac_file";;
-   esac
- done
- rm -f $ac_rmfiles
- 
- if { { ac_try="$ac_link_default"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_link_default") 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then :
-   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
- # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
- # in a Makefile.  We should not override ac_cv_exeext if it was cached,
- # so that the user can short-circuit this test for compilers unknown to
- # Autoconf.
- for ac_file in $ac_files ''
- do
-   test -f "$ac_file" || continue
-   case $ac_file in
-     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
-       ;;
-     [ab].out )
-       # We found the default executable, but exeext='' is most
-       # certainly right.
-       break;;
-     *.* )
-       if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
-       then :; else
-          ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-       fi
-       # We set ac_cv_exeext here because the later test for it is not
-       # safe: cross compilers may not add the suffix if given an `-o'
-       # argument, so we may need to know it at that point already.
-       # Even if this section looks crufty: it has the advantage of
-       # actually working.
-       break;;
-     * )
-       break;;
-   esac
- done
- test "$ac_cv_exeext" = no && ac_cv_exeext=
- 
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
++$as_echo_n "checking for ANSI C header files... " >&6; }
++if test "${ac_cv_header_stdc+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <float.h>
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
-   ac_file=''
++if ac_fn_c_try_compile "$LINENO"; then :
++  ac_cv_header_stdc=yes
 +else
- if test -z "$ac_file"; then :
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
++  ac_cv_header_stdc=no
 +fi
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error 77 "C compiler cannot create executables
- See \`config.log' for more details" "$LINENO" 5 ; }
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++
++if test $ac_cv_header_stdc = yes; then
++  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <string.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++  $EGREP "memchr" >/dev/null 2>&1; then :
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
- $as_echo_n "checking for C compiler default output file name... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
- $as_echo "$ac_file" >&6; }
- ac_exeext=$ac_cv_exeext
++  ac_cv_header_stdc=no
 +fi
- rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
- ac_clean_files=$ac_clean_files_save
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
- $as_echo_n "checking for suffix of executables... " >&6; }
- if { { ac_try="$ac_link"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_link") 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then :
-   # If both `conftest.exe' and `conftest' are `present' (well, observable)
- # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
- # work properly (i.e., refer to `conftest.exe'), while it won't with
- # `rm'.
- for ac_file in conftest.exe conftest conftest.*; do
-   test -f "$ac_file" || continue
-   case $ac_file in
-     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
-     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-         break;;
-     * ) break;;
-   esac
- done
- else
-   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "cannot compute suffix of executables: cannot compile and link
- See \`config.log' for more details" "$LINENO" 5 ; }
++rm -f conftest*
 +
- rm -f conftest conftest$ac_cv_exeext
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
- $as_echo "$ac_cv_exeext" >&6; }
 +fi
- rm -f conftest.$ac_ext
- EXEEXT=$ac_cv_exeext
- ac_exeext=$EXEEXT
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +
- #include <stdio.h>
- int
- main ()
- {
- FILE *f = fopen ("conftest.out", "w");
-  return ferror (f) || fclose (f) != 0;
++if test $ac_cv_header_stdc = yes; then
++  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
-   ;
-   return 0;
- }
++#include <stdlib.h>
 +
- ac_clean_files="$ac_clean_files conftest.out"
- # Check that the compiler produces executables we can run.  If not, either
- # the compiler is broken, or we cross compile.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
- $as_echo_n "checking whether we are cross compiling... " >&6; }
- if test "$cross_compiling" != yes; then
-   { { ac_try="$ac_link"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_link") 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }
-   if { ac_try='./conftest$ac_cv_exeext'
-   { { case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_try") 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; }; then
-     cross_compiling=no
-   else
-     if test "$cross_compiling" = maybe; then
-       cross_compiling=yes
-     else
-       { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "cannot run C compiled programs.
- If you meant to cross compile, use \`--host'.
- See \`config.log' for more details" "$LINENO" 5 ; }
-     fi
-   fi
 +_ACEOF
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
- $as_echo "$cross_compiling" >&6; }
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++  $EGREP "free" >/dev/null 2>&1; then :
++
++else
++  ac_cv_header_stdc=no
 +fi
- rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
- ac_clean_files=$ac_clean_files_save
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
- $as_echo_n "checking for suffix of object files... " >&6; }
- if test "${ac_cv_objext+set}" = set; then :
-   $as_echo_n "(cached) " >&6
++rm -f conftest*
 +
- 
-   ;
++fi
++
++if test $ac_cv_header_stdc = yes; then
++  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
++  if test "$cross_compiling" = yes; then :
++  :
 +else
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
++#include <ctype.h>
++#include <stdlib.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++                 (('a' <= (c) && (c) <= 'i') \
++                   || ('j' <= (c) && (c) <= 'r') \
++                   || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
 +
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
 +int
 +main ()
 +{
- rm -f conftest.o conftest.obj
- if { { ac_try="$ac_compile"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_compile") 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then :
-   for ac_file in conftest.o conftest.obj conftest.*; do
-   test -f "$ac_file" || continue;
-   case $ac_file in
-     *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
-     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
-        break;;
-   esac
- done
++  int i;
++  for (i = 0; i < 256; i++)
++    if (XOR (islower (i), ISLOWER (i))
++      || toupper (i) != TOUPPER (i))
++      return 2;
 +  return 0;
 +}
 +_ACEOF
-   $as_echo "$as_me: failed program was:" >&5
- sed 's/^/| /' conftest.$ac_ext >&5
++if ac_fn_c_try_run "$LINENO"; then :
++
 +else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "cannot compute suffix of object files: cannot compile
- See \`config.log' for more details" "$LINENO" 5 ; }
++  ac_cv_header_stdc=no
++fi
++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
++  conftest.$ac_objext conftest.beam conftest.$ac_ext
++fi
 +
- rm -f conftest.$ac_cv_objext conftest.$ac_ext
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
- $as_echo "$ac_cv_objext" >&6; }
- OBJEXT=$ac_cv_objext
- ac_objext=$OBJEXT
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
- $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +fi
- int
- main ()
- {
- #ifndef __GNUC__
-        choke me
- #endif
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
++$as_echo "$ac_cv_header_stdc" >&6; }
++if test $ac_cv_header_stdc = yes; then
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_compiler_gnu=yes
- else
-   ac_compiler_gnu=no
++$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 +
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
- $as_echo "$ac_cv_c_compiler_gnu" >&6; }
- if test $ac_compiler_gnu = yes; then
-   GCC=yes
++
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++                inttypes.h stdint.h unistd.h
++do :
++  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
++"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++  cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
 +
 +fi
-   GCC=
++
++done
++
++
++
++  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
++if test "x$ac_cv_header_minix_config_h" = x""yes; then :
++  MINIX=yes
 +else
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
- $as_echo_n "checking whether $CC accepts -g... " >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_save_c_werror_flag=$ac_c_werror_flag
-    ac_c_werror_flag=yes
-    ac_cv_prog_cc_g=no
-    CFLAGS="-g"
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
++  MINIX=
 +fi
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_g=yes
- else
-   CFLAGS=""
-       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
++  if test "$MINIX" = yes; then
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
++$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
++
++
++$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
++
++
++$as_echo "#define _MINIX 1" >>confdefs.h
++
++  fi
 +
-   ac_c_werror_flag=$ac_save_c_werror_flag
-        CFLAGS="-g"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
++$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
++if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
-   ac_cv_prog_cc_g=yes
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
++#       define __EXTENSIONS__ 1
++        $ac_includes_default
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_compile "$LINENO"; then :
-    ac_c_werror_flag=$ac_save_c_werror_flag
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
- $as_echo "$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
-   CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-   if test "$GCC" = yes; then
-     CFLAGS="-g -O2"
-   else
-     CFLAGS="-g"
-   fi
- else
-   if test "$GCC" = yes; then
-     CFLAGS="-O2"
-   else
-     CFLAGS=
-   fi
++  ac_cv_safe_to_define___extensions__=yes
++else
++  ac_cv_safe_to_define___extensions__=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
- $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
- if test "${ac_cv_prog_cc_c89+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdarg.h>
- #include <stdio.h>
- #include <sys/types.h>
- #include <sys/stat.h>
- /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
- struct buf { int x; };
- FILE * (*rcsopen) (struct buf *, struct stat *, int);
- static char *e (p, i)
-      char **p;
-      int i;
- {
-   return p[i];
- }
- static char *f (char * (*g) (char **, int), char **p, ...)
- {
-   char *s;
-   va_list v;
-   va_start (v,p);
-   s = g (p, va_arg (v,int));
-   va_end (v);
-   return s;
- }
 +fi
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-    function prototypes and stuff, but not '\xHH' hex character constants.
-    These don't provoke an error unfortunately, instead are silently treated
-    as 'x'.  The following induces an error, until -std is added to get
-    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-    array size at least.  It's necessary to write '\x00'==0 to get something
-    that's true only with -std.  */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
++$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
++  test $ac_cv_safe_to_define___extensions__ = yes &&
++    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
 +
- /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-    inside strings and character constants.  */
- #define FOO(x) 'x'
- int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
++  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
 +
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
- int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
- int argc;
- char **argv;
- int
- main ()
- {
- return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-   ;
-   return 0;
- }
- _ACEOF
- for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-       -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
-   CC="$ac_save_CC $ac_arg"
-   if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_c89=$ac_arg
- fi
- rm -f core conftest.err conftest.$ac_objext
-   test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
- rm -f conftest.$ac_ext
- CC=$ac_save_CC
++  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
 +
- fi
- # AC_CACHE_VAL
- case "x$ac_cv_prog_cc_c89" in
-   x)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
- $as_echo "none needed" >&6; } ;;
-   xno)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
- $as_echo "unsupported" >&6; } ;;
-   *)
-     CC="$CC $ac_cv_prog_cc_c89"
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
- $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
- esac
- if test "x$ac_cv_prog_cc_c89" != xno; then :
++  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
 +
- fi
- 
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
- depcc="$CC"   am_compiler_list=
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
- $as_echo_n "checking dependency style of $depcc... " >&6; }
- if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-   # We make a subdir and do the tests there.  Otherwise we can end up
-   # making bogus files that we don't know about and never remove.  For
-   # instance it was reported that on HP-UX the gcc test will end up
-   # making a dummy file named `D' -- because `-MD' means `put the output
-   # in D'.
-   mkdir conftest.dir
-   # Copy depcomp to subdir because otherwise we won't find it if we're
-   # using a relative directory.
-   cp "$am_depcomp" conftest.dir
-   cd conftest.dir
-   # We will build objects and dependencies in a subdirectory because
-   # it helps to detect inapplicable dependency modes.  For instance
-   # both Tru64's cc and ICC support -MD to output dependencies as a
-   # side effect of compilation, but ICC will put the dependencies in
-   # the current directory while Tru64 will put them in the object
-   # directory.
-   mkdir sub
- 
-   am_cv_CC_dependencies_compiler_type=none
-   if test "$am_compiler_list" = ""; then
-      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-   fi
-   am__universal=false
-   case " $depcc " in #(
-      *\ -arch\ *\ -arch\ *) am__universal=true ;;
-      esac
- 
-   for depmode in $am_compiler_list; do
-     # Setup a source with many dependencies, because some compilers
-     # like to wrap large dependency lists on column 80 (with \), and
-     # we should not choose a depcomp mode which is confused by this.
-     #
-     # We need to recreate these files for each test, as the compiler may
-     # overwrite some of them when testing with obscure command lines.
-     # This happens at least with the AIX C compiler.
-     : > sub/conftest.c
-     for i in 1 2 3 4 5 6; do
-       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-       # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-       # Solaris 8's {/usr,}/bin/sh.
-       touch sub/conftst$i.h
-     done
-     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- 
-     # We check with `-c' and `-o' for the sake of the "dashmstdout"
-     # mode.  It turns out that the SunPro C++ compiler does not properly
-     # handle `-M -o', and we need to detect this.  Also, some Intel
-     # versions had trouble with output in subdirs
-     am__obj=sub/conftest.${OBJEXT-o}
-     am__minus_obj="-o $am__obj"
-     case $depmode in
-     gcc)
-       # This depmode causes a compiler race in universal mode.
-       test "$am__universal" = false || continue
-       ;;
-     nosideeffect)
-       # after this tag, mechanisms are not by side-effect, so they'll
-       # only be used when explicitly requested
-       if test "x$enable_dependency_tracking" = xyes; then
-       continue
-       else
-       break
-       fi
-       ;;
-     msvisualcpp | msvcmsys)
-       # This compiler won't grok `-c -o', but also, the minuso test has
-       # not run yet.  These depmodes are late enough in the game, and
-       # so weak that their functioning should not be impacted.
-       am__obj=conftest.${OBJEXT-o}
-       am__minus_obj=
-       ;;
-     none) break ;;
-     esac
-     if depmode=$depmode \
-        source=sub/conftest.c object=$am__obj \
-        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-        $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-          >/dev/null 2>conftest.err &&
-        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-        grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-       # icc doesn't choke on unknown options, it will just issue warnings
-       # or remarks (even with -Werror).  So we grep stderr for any message
-       # that says an option was ignored or not supported.
-       # When given -MP, icc 7.0 and 7.1 complain thusly:
-       #   icc: Command line warning: ignoring option '-M'; no argument required
-       # The diagnosis changed in icc 8.0:
-       #   icc: Command line remark: option '-MP' not supported
-       if (grep 'ignoring option' conftest.err ||
-           grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-         am_cv_CC_dependencies_compiler_type=$depmode
-         break
-       fi
-     fi
-   done
- 
-   cd ..
-   rm -rf conftest.dir
- else
-   am_cv_CC_dependencies_compiler_type=none
- fi
- 
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
- $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
- CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
- 
-  if
-   test "x$enable_dependency_tracking" != xno \
-   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-   am__fastdepCC_TRUE=
-   am__fastdepCC_FALSE='#'
- else
-   am__fastdepCC_TRUE='#'
-   am__fastdepCC_FALSE=
- fi
++  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
- $as_echo_n "checking for a sed that does not truncate output... " >&6; }
- if test "${ac_cv_path_SED+set}" = set; then :
 +
++am__api_version='1.11'
 +
-             ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
-      for ac_i in 1 2 3 4 5 6 7; do
-        ac_script="$ac_script$as_nl$ac_script"
-      done
-      echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
-      { ac_script=; unset ac_script;}
-      if test -z "$SED"; then
-   ac_path_SED_found=false
-   # Loop through the user's path and test for each of PROGNAME-LIST
++# Find a good install program.  We prefer a C program (faster),
++# so one script is as good as another.  But avoid the broken or
++# incompatible versions:
++# SysV /etc/install, /usr/sbin/install
++# SunOS /usr/etc/install
++# IRIX /sbin/install
++# AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
++# ./install, which can be erroneously created by make from ./install.sh.
++# Reject install programs that cannot install multiple files.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
++$as_echo_n "checking for a BSD-compatible install... " >&6; }
++if test -z "$INSTALL"; then
++if test "${ac_cv_path_install+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     for ac_prog in sed gsed; do
-     for ac_exec_ext in '' $ac_executable_extensions; do
-       ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
- # Check for GNU ac_path_SED and select it if it is found.
-   # Check for GNU $ac_path_SED
- case `"$ac_path_SED" --version 2>&1` in
- *GNU*)
-   ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
- *)
-   ac_count=0
-   $as_echo_n 0123456789 >"conftest.in"
-   while :
-   do
-     cat "conftest.in" "conftest.in" >"conftest.tmp"
-     mv "conftest.tmp" "conftest.in"
-     cp "conftest.in" "conftest.nl"
-     $as_echo '' >> "conftest.nl"
-     "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-     as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_SED_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_SED="$ac_path_SED"
-       ac_path_SED_max=$ac_count
-     fi
-     # 10*(2^10) chars as input seems more than enough
-     test $ac_count -gt 10 && break
-   done
-   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
-       $ac_path_SED_found && break 3
-     done
-   done
++    # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in #((
++  ./ | .// | /[cC]/* | \
++  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
++  /usr/ucb/* ) ;;
++  *)
++    # OSF1 and SCO ODT 3.0 have their own names for install.
++    # Don't use installbsd from OSF since it installs stuff as root
++    # by default.
++    for ac_prog in ginstall scoinst install; do
++      for ac_exec_ext in '' $ac_executable_extensions; do
++      if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
++        if test $ac_prog = install &&
++          grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++          # AIX install.  It has an incompatible calling convention.
++          :
++        elif test $ac_prog = install &&
++          grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++          # program-specific install script used by HP pwplus--don't use.
++          :
++        else
++          rm -rf conftest.one conftest.two conftest.dir
++          echo one > conftest.one
++          echo two > conftest.two
++          mkdir conftest.dir
++          if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
++            test -s conftest.one && test -s conftest.two &&
++            test -s conftest.dir/conftest.one &&
++            test -s conftest.dir/conftest.two
++          then
++            ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++            break 3
++          fi
++        fi
++      fi
++      done
++    done
++    ;;
 +esac
 +
-   if test -z "$ac_cv_path_SED"; then
-     as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
-   fi
- else
-   ac_cv_path_SED=$SED
- fi
 +  done
 +IFS=$as_save_IFS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
- $as_echo "$ac_cv_path_SED" >&6; }
-  SED="$ac_cv_path_SED"
-   rm -f conftest.sed
- 
- test -z "$SED" && SED=sed
- Xsed="$SED -e 1s/^X//"
++
++rm -rf conftest.one conftest.two conftest.dir
 +
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
- $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
- if test "${ac_cv_path_GREP+set}" = set; then :
++  if test "${ac_cv_path_install+set}" = set; then
++    INSTALL=$ac_cv_path_install
++  else
++    # As a last resort, use the slow shell script.  Don't cache a
++    # value for INSTALL within a source directory, because that will
++    # break other packages using the cache if that directory is
++    # removed, or if the value is a relative name.
++    INSTALL=$ac_install_sh
++  fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
++$as_echo "$INSTALL" >&6; }
 +
++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
++# It thinks the first close brace ends the variable substitution.
++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 +
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 +
++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
++$as_echo_n "checking whether build environment is sane... " >&6; }
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Reject unsafe characters in $srcdir or the absolute working directory
++# name.  Accept space and tab only in the latter.
++am_lf='
++'
++case `pwd` in
++  *[\\\"\#\$\&\'\`$am_lf]*)
++    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
++esac
++case $srcdir in
++  *[\\\"\#\$\&\'\`$am_lf\ \   ]*)
++    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
++esac
 +
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments.  Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
++   if test "$*" = "X"; then
++      # -L didn't work.
++      set X `ls -t "$srcdir/configure" conftest.file`
++   fi
++   rm -f conftest.file
++   if test "$*" != "X $srcdir/configure conftest.file" \
++      && test "$*" != "X conftest.file $srcdir/configure"; then
 +
++      # If neither matched, then we have a broken ls.  This can happen
++      # if, for instance, CONFIG_SHELL is bash and it inherits a
++      # broken ls alias from the environment.  This has actually
++      # happened.  Such a system could not be considered "sane".
++      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
++alias in your environment" "$LINENO" 5
++   fi
 +
++   test "$2" = conftest.file
++   )
++then
++   # Ok.
++   :
++else
++   as_fn_error $? "newly created file is older than distributed files!
++Check your system clock" "$LINENO" 5
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++test "$program_prefix" != NONE &&
++  program_transform_name="s&^&$program_prefix&;$program_transform_name"
++# Use a double $ so make ignores it.
++test "$program_suffix" != NONE &&
++  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
++# Double any \ or $.
++# By default was `s,x,x', remove it if useless.
++ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
++program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 +
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
 +
++if test x"${MISSING+set}" != xset; then
++  case $am_aux_dir in
++  *\ * | *\   *)
++    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
++  *)
++    MISSING="\${SHELL} $am_aux_dir/missing" ;;
++  esac
++fi
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++  am_missing_run="$MISSING --run "
++else
++  am_missing_run=
++  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
++$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
 +
++if test x"${install_sh}" != xset; then
++  case $am_aux_dir in
++  *\ * | *\   *)
++    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
++  *)
++    install_sh="\${SHELL} $am_aux_dir/install-sh"
++  esac
++fi
 +
-   if test -z "$GREP"; then
-   ac_path_GREP_found=false
-   # Loop through the user's path and test for each of PROGNAME-LIST
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'.  However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_STRIP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     for ac_prog in grep ggrep; do
++  if test -n "$STRIP"; then
++  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
-       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
- # Check for GNU ac_path_GREP and select it if it is found.
-   # Check for GNU $ac_path_GREP
- case `"$ac_path_GREP" --version 2>&1` in
- *GNU*)
-   ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
- *)
-   ac_count=0
-   $as_echo_n 0123456789 >"conftest.in"
-   while :
-   do
-     cat "conftest.in" "conftest.in" >"conftest.tmp"
-     mv "conftest.tmp" "conftest.in"
-     cp "conftest.in" "conftest.nl"
-     $as_echo 'GREP' >> "conftest.nl"
-     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-     as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_GREP_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_GREP="$ac_path_GREP"
-       ac_path_GREP_max=$ac_count
-     fi
-     # 10*(2^10) chars as input seems more than enough
-     test $ac_count -gt 10 && break
-   done
-   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
- esac
- 
-       $ac_path_GREP_found && break 3
-     done
-   done
 +    for ac_exec_ext in '' $ac_executable_extensions; do
-   if test -z "$ac_cv_path_GREP"; then
-     as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-   fi
- else
-   ac_cv_path_GREP=$GREP
- fi
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
 +IFS=$as_save_IFS
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
- $as_echo "$ac_cv_path_GREP" >&6; }
-  GREP="$ac_cv_path_GREP"
 +
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
- $as_echo_n "checking for egrep... " >&6; }
- if test "${ac_cv_path_EGREP+set}" = set; then :
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
-   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-    then ac_cv_path_EGREP="$GREP -E"
-    else
-      if test -z "$EGREP"; then
-   ac_path_EGREP_found=false
-   # Loop through the user's path and test for each of PROGNAME-LIST
-   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++  ac_ct_STRIP=$STRIP
++  # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     for ac_prog in egrep; do
++  if test -n "$ac_ct_STRIP"; then
++  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
-       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
- # Check for GNU ac_path_EGREP and select it if it is found.
-   # Check for GNU $ac_path_EGREP
- case `"$ac_path_EGREP" --version 2>&1` in
- *GNU*)
-   ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
- *)
-   ac_count=0
-   $as_echo_n 0123456789 >"conftest.in"
-   while :
-   do
-     cat "conftest.in" "conftest.in" >"conftest.tmp"
-     mv "conftest.tmp" "conftest.in"
-     cp "conftest.in" "conftest.nl"
-     $as_echo 'EGREP' >> "conftest.nl"
-     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-     as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_EGREP="$ac_path_EGREP"
-       ac_path_EGREP_max=$ac_count
-     fi
-     # 10*(2^10) chars as input seems more than enough
-     test $ac_count -gt 10 && break
-   done
-   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
- esac
- 
-       $ac_path_EGREP_found && break 3
-     done
-   done
 +    for ac_exec_ext in '' $ac_executable_extensions; do
-   if test -z "$ac_cv_path_EGREP"; then
-     as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-   fi
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_STRIP="strip"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
 +IFS=$as_save_IFS
-   ac_cv_path_EGREP=$EGREP
++
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
 +else
-    fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
- $as_echo "$ac_cv_path_EGREP" >&6; }
-  EGREP="$ac_cv_path_EGREP"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
 +fi
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
- $as_echo_n "checking for fgrep... " >&6; }
- if test "${ac_cv_path_FGREP+set}" = set; then :
++  if test "x$ac_ct_STRIP" = x; then
++    STRIP=":"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    STRIP=$ac_ct_STRIP
++  fi
++else
++  STRIP="$ac_cv_prog_STRIP"
++fi
 +
++fi
++INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 +
-   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
-    then ac_cv_path_FGREP="$GREP -F"
-    else
-      if test -z "$FGREP"; then
-   ac_path_FGREP_found=false
-   # Loop through the user's path and test for each of PROGNAME-LIST
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
++$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
++if test -z "$MKDIR_P"; then
++  if test "${ac_cv_path_mkdir+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-     for ac_prog in fgrep; do
-     for ac_exec_ext in '' $ac_executable_extensions; do
-       ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
-       { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
- # Check for GNU ac_path_FGREP and select it if it is found.
-   # Check for GNU $ac_path_FGREP
- case `"$ac_path_FGREP" --version 2>&1` in
- *GNU*)
-   ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
- *)
-   ac_count=0
-   $as_echo_n 0123456789 >"conftest.in"
-   while :
-   do
-     cat "conftest.in" "conftest.in" >"conftest.tmp"
-     mv "conftest.tmp" "conftest.in"
-     cp "conftest.in" "conftest.nl"
-     $as_echo 'FGREP' >> "conftest.nl"
-     "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
-     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-     as_fn_arith $ac_count + 1 && ac_count=$as_val
-     if test $ac_count -gt ${ac_path_FGREP_max-0}; then
-       # Best one so far, save it but keep looking for a better one
-       ac_cv_path_FGREP="$ac_path_FGREP"
-       ac_path_FGREP_max=$ac_count
-     fi
-     # 10*(2^10) chars as input seems more than enough
-     test $ac_count -gt 10 && break
++for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
-   rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++    for ac_prog in mkdir gmkdir; do
++       for ac_exec_ext in '' $ac_executable_extensions; do
++         { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
++         case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
++           'mkdir (GNU coreutils) '* | \
++           'mkdir (coreutils) '* | \
++           'mkdir (fileutils) '4.1*)
++             ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
++             break 3;;
++         esac
++       done
++       done
 +  done
-       $ac_path_FGREP_found && break 3
-     done
-   done
++IFS=$as_save_IFS
++
++fi
++
++  test -d ./--version && rmdir ./--version
++  if test "${ac_cv_path_mkdir+set}" = set; then
++    MKDIR_P="$ac_cv_path_mkdir -p"
++  else
++    # As a last resort, use the slow shell script.  Don't cache a
++    # value for MKDIR_P within a source directory, because that will
++    # break other packages using the cache if that directory is
++    # removed, or if the value is a relative name.
++    MKDIR_P="$ac_install_sh -d"
++  fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
++$as_echo "$MKDIR_P" >&6; }
++
++mkdir_p="$MKDIR_P"
++case $mkdir_p in
++  [\\/$]* | ?:[\\/]*) ;;
++  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
 +esac
 +
-   if test -z "$ac_cv_path_FGREP"; then
-     as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
-   fi
++for ac_prog in gawk mawk nawk awk
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_AWK+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$AWK"; then
++  ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_AWK="$ac_prog"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
 +IFS=$as_save_IFS
-   ac_cv_path_FGREP=$FGREP
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
++$as_echo "$AWK" >&6; }
 +else
-    fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
- $as_echo "$ac_cv_path_FGREP" >&6; }
-  FGREP="$ac_cv_path_FGREP"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
 +fi
 +
- test -z "$GREP" && GREP=grep
 +
++  test -n "$AWK" && break
++done
 +
- # Check whether --with-gnu-ld was given.
- if test "${with_gnu_ld+set}" = set; then :
-   withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
- else
-   with_gnu_ld=no
- fi
- 
- ac_prog=ld
- if test "$GCC" = yes; then
-   # Check if gcc -print-prog-name=ld gives a path.
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
- $as_echo_n "checking for ld used by $CC... " >&6; }
-   case $host in
-   *-*-mingw*)
-     # gcc leaves a trailing carriage return which upsets mingw
-     ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-   *)
-     ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-   esac
-   case $ac_prog in
-     # Accept absolute paths.
-     [\\/]* | ?:[\\/]*)
-       re_direlt='/[^/][^/]*/\.\./'
-       # Canonicalize the pathname of ld
-       ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-       while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-       ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-       done
-       test -z "$LD" && LD="$ac_prog"
-       ;;
-   "")
-     # If it fails, then pretend we aren't using GCC.
-     ac_prog=ld
-     ;;
-   *)
-     # If it is relative, then search for the first ld in PATH.
-     with_gnu_ld=unknown
-     ;;
-   esac
- elif test "$with_gnu_ld" = yes; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
- $as_echo_n "checking for GNU ld... " >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
- $as_echo_n "checking for non-GNU ld... " >&6; }
- fi
- if test "${lt_cv_path_LD+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -z "$LD"; then
-   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-   for ac_dir in $PATH; do
-     IFS="$lt_save_ifs"
-     test -z "$ac_dir" && ac_dir=.
-     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-       lt_cv_path_LD="$ac_dir/$ac_prog"
-       # Check to see if the program is GNU ld.  I'd rather use --version,
-       # but apparently some variants of GNU ld only accept -v.
-       # Break only if it was the GNU/non-GNU ld that we prefer.
-       case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-       *GNU* | *'with BFD'*)
-       test "$with_gnu_ld" != no && break
-       ;;
-       *)
-       test "$with_gnu_ld" != yes && break
-       ;;
-       esac
-     fi
-   done
-   IFS="$lt_save_ifs"
- else
-   lt_cv_path_LD="$LD" # Let the user override the test with a path.
- fi
- fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
++set x ${MAKE-make}
++ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\"" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  cat >conftest.make <<\_ACEOF
++SHELL = /bin/sh
++all:
++      @echo '@@@%%%=$(MAKE)=@@@%%%'
++_ACEOF
++# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
++case `${MAKE-make} -f conftest.make 2>/dev/null` in
++  *@@@%%%=?*=@@@%%%*)
++    eval ac_cv_prog_make_${ac_make}_set=yes;;
++  *)
++    eval ac_cv_prog_make_${ac_make}_set=no;;
++esac
++rm -f conftest.make
++fi
++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++  SET_MAKE=
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++  SET_MAKE="MAKE=${MAKE-make}"
++fi
 +
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++  am__leading_dot=.
++else
++  am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
 +
++DEPDIR="${am__leading_dot}deps"
 +
++ac_config_commands="$ac_config_commands depfiles"
 +
 +
++am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++      @echo this is the am__doit target
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
++$as_echo_n "checking for style of include used by $am_make... " >&6; }
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# Ignore all kinds of additional output from `make'.
++case `$am_make -s -f confmf 2> /dev/null` in #(
++*the\ am__doit\ target*)
++  am__include=include
++  am__quote=
++  _am_result=GNU
++  ;;
++esac
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++   echo '.include "confinc"' > confmf
++   case `$am_make -s -f confmf 2> /dev/null` in #(
++   *the\ am__doit\ target*)
++     am__include=.include
++     am__quote="\""
++     _am_result=BSD
++     ;;
++   esac
++fi
 +
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
++$as_echo "$_am_result" >&6; }
++rm -f confinc confmf
 +
++# Check whether --enable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then :
++  enableval=$enable_dependency_tracking;
++fi
 +
++if test "x$enable_dependency_tracking" != xno; then
++  am_depcomp="$ac_aux_dir/depcomp"
++  AMDEPBACKSLASH='\'
++fi
++ if test "x$enable_dependency_tracking" != xno; then
++  AMDEP_TRUE=
++  AMDEP_FALSE='#'
++else
++  AMDEP_TRUE='#'
++  AMDEP_FALSE=
++fi
 +
 +
++if test "`cd $srcdir && pwd`" != "`pwd`"; then
++  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
++  # is not polluted with repeated "-I."
++  am__isrc=' -I$(srcdir)'
++  # test to see if srcdir already configured
++  if test -f $srcdir/config.status; then
++    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
++  fi
++fi
 +
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++  if (cygpath --version) >/dev/null 2>/dev/null; then
++    CYGPATH_W='cygpath -w'
++  else
++    CYGPATH_W=echo
++  fi
++fi
 +
 +
++# Define the identity of the package.
++ PACKAGE='mech_eap'
++ VERSION='0.1'
 +
 +
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE "$PACKAGE"
++_ACEOF
 +
 +
++cat >>confdefs.h <<_ACEOF
++#define VERSION "$VERSION"
++_ACEOF
 +
- LD="$lt_cv_path_LD"
- if test -n "$LD"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
- $as_echo "$LD" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
- $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
- if test "${lt_cv_prog_gnu_ld+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   # I'd rather use --version here, but apparently some GNU lds only accept -v.
- case `$LD -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
-   lt_cv_prog_gnu_ld=yes
-   ;;
- *)
-   lt_cv_prog_gnu_ld=no
-   ;;
- esac
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
- $as_echo "$lt_cv_prog_gnu_ld" >&6; }
- with_gnu_ld=$lt_cv_prog_gnu_ld
++# Some tools Automake needs.
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
- $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
- if test "${lt_cv_path_NM+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$NM"; then
-   # Let the user override the test.
-   lt_cv_path_NM="$NM"
- else
-   lt_nm_to_check="${ac_tool_prefix}nm"
-   if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-     lt_nm_to_check="$lt_nm_to_check nm"
-   fi
-   for lt_tmp_nm in $lt_nm_to_check; do
-     lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-     for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-       IFS="$lt_save_ifs"
-       test -z "$ac_dir" && ac_dir=.
-       tmp_nm="$ac_dir/$lt_tmp_nm"
-       if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       # Tru64's nm complains that /dev/null is an invalid object file
-       case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-       */dev/null* | *'Invalid file or object type'*)
-         lt_cv_path_NM="$tmp_nm -B"
-         break
-         ;;
-       *)
-         case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-         */dev/null*)
-           lt_cv_path_NM="$tmp_nm -p"
-           break
-           ;;
-         *)
-           lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-           continue # so that we can try to find one that supports BSD flags
-           ;;
-         esac
-         ;;
-       esac
-       fi
-     done
-     IFS="$lt_save_ifs"
-   done
-   : ${lt_cv_path_NM=no}
- fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
- $as_echo "$lt_cv_path_NM" >&6; }
- if test "$lt_cv_path_NM" != "no"; then
-   NM="$lt_cv_path_NM"
- else
-   # Didn't find any BSD compatible name lister, look for dumpbin.
-   if test -n "$ac_tool_prefix"; then
-   for ac_prog in "dumpbin -symbols" "link -dump -symbols"
-   do
-     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$DUMPBIN"; then
-   ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
 +
 +
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
 +
 +
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
 +
 +
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
 +
 +
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 +
- fi
- fi
- DUMPBIN=$ac_cv_prog_DUMPBIN
- if test -n "$DUMPBIN"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
- $as_echo "$DUMPBIN" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++# We need awk for the "check" target.  The system "awk" is bad on
++# some platforms.
++# Always define AMTAR for backward compatibility.
 +
-     test -n "$DUMPBIN" && break
-   done
- fi
- if test -z "$DUMPBIN"; then
-   ac_ct_DUMPBIN=$DUMPBIN
-   for ac_prog in "dumpbin -symbols" "link -dump -symbols"
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_DUMPBIN"; then
-   ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++AMTAR=${AMTAR-"${am_missing_run}tar"}
 +
++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 +
- fi
- fi
- ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
- if test -n "$ac_ct_DUMPBIN"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
- $as_echo "$ac_ct_DUMPBIN" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +
-   test -n "$ac_ct_DUMPBIN" && break
- done
 +
 +
-   if test "x$ac_ct_DUMPBIN" = x; then
-     DUMPBIN=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     DUMPBIN=$ac_ct_DUMPBIN
++depcc="$CC"   am_compiler_list=
 +
- fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
++$as_echo_n "checking dependency style of $depcc... " >&6; }
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_CC_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
 +  fi
-   if test "$DUMPBIN" != ":"; then
-     NM="$DUMPBIN"
-   fi
- fi
- test -z "$NM" && NM=nm
++  am__universal=false
++  case " $depcc " in #(
++     *\ -arch\ *\ -arch\ *) am__universal=true ;;
++     esac
 +
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
- $as_echo_n "checking the name lister ($NM) interface... " >&6; }
- if test "${lt_cv_nm_interface+set}" = set; then :
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.  Also, some Intel
++    # versions had trouble with output in subdirs
++    am__obj=sub/conftest.${OBJEXT-o}
++    am__minus_obj="-o $am__obj"
++    case $depmode in
++    gcc)
++      # This depmode causes a compiler race in universal mode.
++      test "$am__universal" = false || continue
++      ;;
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++      continue
++      else
++      break
++      fi
++      ;;
++    msvisualcpp | msvcmsys)
++      # This compiler won't grok `-c -o', but also, the minuso test has
++      # not run yet.  These depmodes are late enough in the game, and
++      # so weak that their functioning should not be impacted.
++      am__obj=conftest.${OBJEXT-o}
++      am__minus_obj=
++      ;;
++    none) break ;;
++    esac
++    if depmode=$depmode \
++       source=sub/conftest.c object=$am__obj \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_CC_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
 +
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_CC_dependencies_compiler_type=none
++fi
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
++$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 +
++ if
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++  am__fastdepCC_TRUE=
++  am__fastdepCC_FALSE='#'
++else
++  am__fastdepCC_TRUE='#'
++  am__fastdepCC_FALSE=
++fi
 +
 +
 +
-   lt_cv_nm_interface="BSD nm"
-   echo "int some_variable = 0;" > conftest.$ac_ext
-   (eval echo "\"\$as_me:4639: $ac_compile\"" >&5)
-   (eval "$ac_compile" 2>conftest.err)
-   cat conftest.err >&5
-   (eval echo "\"\$as_me:4642: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
-   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-   cat conftest.err >&5
-   (eval echo "\"\$as_me:4645: output\"" >&5)
-   cat conftest.out >&5
-   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-     lt_cv_nm_interface="MS dumpbin"
++if test "x$CC" != xcc; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
++$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
++$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
++fi
++set dummy $CC; ac_cc=`$as_echo "$2" |
++                    sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
++if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\"" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   rm -f conftest*
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++# Make sure it works both with $CC and with simple cc.
++# We do the test twice because some compilers refuse to overwrite an
++# existing .o file with -o, though they will create one.
++ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
++rm -f conftest2.*
++if { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } &&
++   test -f conftest2.$ac_objext && { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; };
++then
++  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
++  if test "x$CC" != xcc; then
++    # Test first that cc exists at all.
++    if { ac_try='cc -c conftest.$ac_ext >&5'
++  { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; }; then
++      ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
++      rm -f conftest2.*
++      if { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } &&
++       test -f conftest2.$ac_objext && { { case "(($ac_try" in
++  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
++  *) ac_try_echo=$ac_try;;
++esac
++eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
++$as_echo "$ac_try_echo"; } >&5
++  (eval "$ac_try") 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; };
++      then
++      # cc works too.
++      :
++      else
++      # cc exists but doesn't like -o.
++      eval ac_cv_prog_cc_${ac_cc}_c_o=no
++      fi
++    fi
 +  fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
- $as_echo "$lt_cv_nm_interface" >&6; }
++else
++  eval ac_cv_prog_cc_${ac_cc}_c_o=no
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
- $as_echo_n "checking whether ln -s works... " >&6; }
- LN_S=$as_ln_s
- if test "$LN_S" = "ln -s"; then
++rm -f core conftest*
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
- $as_echo "no, using $LN_S" >&6; }
++fi
++if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 +$as_echo "yes" >&6; }
 +else
- # find the maximum length of command line arguments
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
- $as_echo_n "checking the maximum length of command line arguments... " >&6; }
- if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
-   $as_echo_n "(cached) " >&6
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++
++$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
++
 +fi
 +
-     i=0
-   teststring="ABCD"
++# FIXME: we rely on the cache variable name because
++# there is no other way.
++set dummy $CC
++am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
++eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
++if test "$am_t" != yes; then
++   # Losing compiler, so override with the script.
++   # FIXME: It is wrong to rewrite CC.
++   # But if we don't then we get into trouble of one sort or another.
++   # A longer-term fix would be to have automake use am__CC in this case,
++   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
++   CC="$am_aux_dir/compile $CC"
++fi
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
++$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
++    # Check whether --enable-maintainer-mode was given.
++if test "${enable_maintainer_mode+set}" = set; then :
++  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 +else
-   case $build_os in
-   msdosdjgpp*)
-     # On DJGPP, this test can blow up pretty badly due to problems in libc
-     # (any single argument exceeding 2000 bytes causes a buffer overrun
-     # during glob expansion).  Even if it were fixed, the result of this
-     # check would be larger than it should be.
-     lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-     ;;
++  USE_MAINTAINER_MODE=no
++fi
 +
-   gnu*)
-     # Under GNU Hurd, this test is not required because there is
-     # no limit to the length of command line arguments.
-     # Libtool will interpret -1 as no limit whatsoever
-     lt_cv_sys_max_cmd_len=-1;
-     ;;
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
++$as_echo "$USE_MAINTAINER_MODE" >&6; }
++   if test $USE_MAINTAINER_MODE = yes; then
++  MAINTAINER_MODE_TRUE=
++  MAINTAINER_MODE_FALSE='#'
++else
++  MAINTAINER_MODE_TRUE='#'
++  MAINTAINER_MODE_FALSE=
++fi
 +
-   cygwin* | mingw* | cegcc*)
-     # On Win9x/ME, this test blows up -- it succeeds, but takes
-     # about 5 minutes as the teststring grows exponentially.
-     # Worse, since 9x/ME are not pre-emptively multitasking,
-     # you end up with a "frozen" computer, even though with patience
-     # the test eventually succeeds (with a max line length of 256k).
-     # Instead, let's just punt: use the minimum linelength reported by
-     # all of the supported platforms: 8192 (on NT/2K/XP).
-     lt_cv_sys_max_cmd_len=8192;
-     ;;
++  MAINT=$MAINTAINER_MODE_TRUE
 +
-   amigaos*)
-     # On AmigaOS with pdksh, this test takes hours, literally.
-     # So we just punt and use a minimum line length of 8192.
-     lt_cv_sys_max_cmd_len=8192;
-     ;;
- 
-   netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-     # This has been around since 386BSD, at least.  Likely further.
-     if test -x /sbin/sysctl; then
-       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-     elif test -x /usr/sbin/sysctl; then
-       lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-     else
-       lt_cv_sys_max_cmd_len=65536     # usable default for all BSDs
-     fi
-     # And add a safety zone
-     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-     lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-     ;;
 +
-   interix*)
-     # We know the value 262144 and hardcode it with a safety zone (like BSD)
-     lt_cv_sys_max_cmd_len=196608
-     ;;
 +
-   osf*)
-     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-     # nice to cause kernel panics so lets avoid the loop below.
-     # First set a reasonable default.
-     lt_cv_sys_max_cmd_len=16384
-     #
-     if test -x /sbin/sysconfig; then
-       case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-         *1*) lt_cv_sys_max_cmd_len=-1 ;;
-       esac
-     fi
-     ;;
-   sco3.2v5*)
-     lt_cv_sys_max_cmd_len=102400
-     ;;
-   sysv5* | sco5v6* | sysv4.2uw2*)
-     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-     if test -n "$kargmax"; then
-       lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[        ]//'`
-     else
-       lt_cv_sys_max_cmd_len=32768
-     fi
-     ;;
-   *)
-     lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-     if test -n "$lt_cv_sys_max_cmd_len"; then
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-     else
-       # Make teststring a little bigger before we do anything with it.
-       # a 1K string should be a reasonable start.
-       for i in 1 2 3 4 5 6 7 8 ; do
-         teststring=$teststring$teststring
-       done
-       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-       # If test is not a shell built-in, we'll probably end up computing a
-       # maximum length that is only half of the actual maximum length, but
-       # we can't tell.
-       while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-                = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-             test $i != 17 # 1/2 MB should be enough
-       do
-         i=`expr $i + 1`
-         teststring=$teststring$teststring
-       done
-       # Only check the string length outside the loop.
-       lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-       teststring=
-       # Add a significant safety factor because C++ compilers can tack on
-       # massive amounts of additional arguments before passing them to the
-       # linker.  It appears as though 1/2 is a usable value.
-       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-     fi
-     ;;
-   esac
++case `pwd` in
++  *\ * | *\   *)
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
++$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
++esac
 +
- fi
 +
- if test -n $lt_cv_sys_max_cmd_len ; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
- $as_echo "$lt_cv_sys_max_cmd_len" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
- $as_echo "none" >&6; }
- fi
- max_cmd_len=$lt_cv_sys_max_cmd_len
 +
- : ${CP="cp -f"}
- : ${MV="mv -f"}
- : ${RM="rm -f"}
++macro_version='2.2.6b'
++macro_revision='1.3017'
 +
 +
 +
 +
 +
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
- $as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
- # Try some XSI features
- xsi_shell=no
- ( _lt_dummy="a/b/c"
-   test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-       = c,a/b,, \
-     && eval 'test $(( 1 + 1 )) -eq 2 \
-     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-   && xsi_shell=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
- $as_echo "$xsi_shell" >&6; }
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
- $as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
- lt_shell_append=no
- ( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
-     >/dev/null 2>&1 \
-   && lt_shell_append=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
- $as_echo "$lt_shell_append" >&6; }
 +
 +
- if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-   lt_unset=unset
- else
-   lt_unset=false
- fi
 +
 +
- # test EBCDIC or ASCII
- case `echo X|tr X '\101'` in
-  A) # ASCII based system
-     # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-   lt_SP2NL='tr \040 \012'
-   lt_NL2SP='tr \015\012 \040\040'
-   ;;
-  *) # EBCDIC based system
-   lt_SP2NL='tr \100 \n'
-   lt_NL2SP='tr \r\n \100\100'
-   ;;
 +
 +
++ltmain="$ac_aux_dir/ltmain.sh"
 +
++# Make sure we can run config.sub.
++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
++  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
++$as_echo_n "checking build system type... " >&6; }
++if test "${ac_cv_build+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_build_alias=$build_alias
++test "x$ac_build_alias" = x &&
++  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
++test "x$ac_build_alias" = x &&
++  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
++  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 +
- 
- 
- 
- 
- 
- 
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
- $as_echo_n "checking for $LD option to reload object files... " >&6; }
- if test "${lt_cv_ld_reload_flag+set}" = set; then :
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
++$as_echo "$ac_cv_build" >&6; }
++case $ac_cv_build in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
 +esac
++build=$ac_cv_build
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_build
++shift
++build_cpu=$1
++build_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++build_os=$*
++IFS=$ac_save_IFS
++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 +
 +
-   lt_cv_ld_reload_flag='-r'
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
++$as_echo_n "checking host system type... " >&6; }
++if test "${ac_cv_host+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
- $as_echo "$lt_cv_ld_reload_flag" >&6; }
- reload_flag=$lt_cv_ld_reload_flag
- case $reload_flag in
- "" | " "*) ;;
- *) reload_flag=" $reload_flag" ;;
- esac
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- case $host_os in
-   darwin*)
-     if test "$GCC" = yes; then
-       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-     else
-       reload_cmds='$LD$reload_flag -o $output$reload_objs'
-     fi
-     ;;
- esac
- 
- 
- 
- 
- 
- 
++  if test "x$host_alias" = x; then
++  ac_cv_host=$ac_cv_build
++else
++  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
++    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 +fi
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
- set dummy ${ac_tool_prefix}objdump; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
++$as_echo "$ac_cv_host" >&6; }
++case $ac_cv_host in
++*-*-*) ;;
++*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
++esac
++host=$ac_cv_host
++ac_save_IFS=$IFS; IFS='-'
++set x $ac_cv_host
++shift
++host_cpu=$1
++host_vendor=$2
++shift; shift
++# Remember, the first character of IFS is used to create $*,
++# except with old shells:
++host_os=$*
++IFS=$ac_save_IFS
++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 +
 +
-   if test -n "$OBJDUMP"; then
-   ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
++$as_echo_n "checking for a sed that does not truncate output... " >&6; }
++if test "${ac_cv_path_SED+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
++            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
++     for ac_i in 1 2 3 4 5 6 7; do
++       ac_script="$ac_script$as_nl$ac_script"
++     done
++     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
++     { ac_script=; unset ac_script;}
++     if test -z "$SED"; then
++  ac_path_SED_found=false
++  # Loop through the user's path and test for each of PROGNAME-LIST
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
++    for ac_prog in sed gsed; do
 +    for ac_exec_ext in '' $ac_executable_extensions; do
- IFS=$as_save_IFS
++      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
++      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
++# Check for GNU ac_path_SED and select it if it is found.
++  # Check for GNU $ac_path_SED
++case `"$ac_path_SED" --version 2>&1` in
++*GNU*)
++  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
++*)
++  ac_count=0
++  $as_echo_n 0123456789 >"conftest.in"
++  while :
++  do
++    cat "conftest.in" "conftest.in" >"conftest.tmp"
++    mv "conftest.tmp" "conftest.in"
++    cp "conftest.in" "conftest.nl"
++    $as_echo '' >> "conftest.nl"
++    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
++    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++    as_fn_arith $ac_count + 1 && ac_count=$as_val
++    if test $ac_count -gt ${ac_path_SED_max-0}; then
++      # Best one so far, save it but keep looking for a better one
++      ac_cv_path_SED="$ac_path_SED"
++      ac_path_SED_max=$ac_count
++    fi
++    # 10*(2^10) chars as input seems more than enough
++    test $ac_count -gt 10 && break
 +  done
- fi
- fi
- OBJDUMP=$ac_cv_prog_OBJDUMP
- if test -n "$OBJDUMP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
- $as_echo "$OBJDUMP" >&6; }
++  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
++esac
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++      $ac_path_SED_found && break 3
++    done
++  done
++  done
++IFS=$as_save_IFS
++  if test -z "$ac_cv_path_SED"; then
++    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
++  fi
 +else
- 
++  ac_cv_path_SED=$SED
 +fi
 +
- if test -z "$ac_cv_prog_OBJDUMP"; then
-   ac_ct_OBJDUMP=$OBJDUMP
-   # Extract the first word of "objdump", so it can be a program name with args.
- set dummy objdump; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
 +fi
-   if test -n "$ac_ct_OBJDUMP"; then
-   ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
++$as_echo "$ac_cv_path_SED" >&6; }
++ SED="$ac_cv_path_SED"
++  rm -f conftest.sed
++
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++
++
++
++
++
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
++$as_echo_n "checking for fgrep... " >&6; }
++if test "${ac_cv_path_FGREP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_OBJDUMP="objdump"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
++  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
++   then ac_cv_path_FGREP="$GREP -F"
++   else
++     if test -z "$FGREP"; then
++  ac_path_FGREP_found=false
++  # Loop through the user's path and test for each of PROGNAME-LIST
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
++    for ac_prog in fgrep; do
 +    for ac_exec_ext in '' $ac_executable_extensions; do
- IFS=$as_save_IFS
- 
- fi
- fi
- ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
- if test -n "$ac_ct_OBJDUMP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
- $as_echo "$ac_ct_OBJDUMP" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-   if test "x$ac_ct_OBJDUMP" = x; then
-     OBJDUMP="false"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
++      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
++      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
++# Check for GNU ac_path_FGREP and select it if it is found.
++  # Check for GNU $ac_path_FGREP
++case `"$ac_path_FGREP" --version 2>&1` in
++*GNU*)
++  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
++*)
++  ac_count=0
++  $as_echo_n 0123456789 >"conftest.in"
++  while :
++  do
++    cat "conftest.in" "conftest.in" >"conftest.tmp"
++    mv "conftest.tmp" "conftest.in"
++    cp "conftest.in" "conftest.nl"
++    $as_echo 'FGREP' >> "conftest.nl"
++    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
++    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
++    as_fn_arith $ac_count + 1 && ac_count=$as_val
++    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
++      # Best one so far, save it but keep looking for a better one
++      ac_cv_path_FGREP="$ac_path_FGREP"
++      ac_path_FGREP_max=$ac_count
++    fi
++    # 10*(2^10) chars as input seems more than enough
++    test $ac_count -gt 10 && break
 +  done
-     OBJDUMP=$ac_ct_OBJDUMP
++  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 +esac
-   OBJDUMP="$ac_cv_prog_OBJDUMP"
++
++      $ac_path_FGREP_found && break 3
++    done
++  done
++  done
++IFS=$as_save_IFS
++  if test -z "$ac_cv_path_FGREP"; then
++    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
 +  fi
 +else
- test -z "$OBJDUMP" && OBJDUMP=objdump
++  ac_cv_path_FGREP=$FGREP
 +fi
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
- $as_echo_n "checking how to recognize dependent libraries... " >&6; }
- if test "${lt_cv_deplibs_check_method+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   lt_cv_file_magic_cmd='$MAGIC_CMD'
- lt_cv_file_magic_test_file=
- lt_cv_deplibs_check_method='unknown'
- # Need to set the preceding variable on all platforms that support
- # interlibrary dependencies.
- # 'none' -- dependencies not supported.
- # `unknown' -- same as none, but documents that we really don't know.
- # 'pass_all' -- all dependencies passed with no checks.
- # 'test_compile' -- check by making test program.
- # 'file_magic [[regex]]' -- check by looking for files in library path
- # which responds to the $file_magic_cmd with a given extended regex.
- # If you have `file' or equivalent on your system and you're not sure
- # whether `pass_all' will *always* work, you probably want this one.
++   fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
++$as_echo "$ac_cv_path_FGREP" >&6; }
++ FGREP="$ac_cv_path_FGREP"
 +
 +
++test -z "$GREP" && GREP=grep
 +
 +
 +
 +
 +
 +
 +
- case $host_os in
- aix[4-9]*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
 +
- beos*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
 +
- bsdi[45]*)
-   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-   lt_cv_file_magic_cmd='/usr/bin/file -L'
-   lt_cv_file_magic_test_file=/shlib/libc.so
-   ;;
 +
- cygwin*)
-   # func_win32_libid is a shell function defined in ltmain.sh
-   lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-   lt_cv_file_magic_cmd='func_win32_libid'
-   ;;
 +
- mingw* | pw32*)
-   # Base MSYS/MinGW do not provide the 'file' command needed by
-   # func_win32_libid shell function, so use a weaker test based on 'objdump',
-   # unless we find 'file', for example because we are cross-compiling.
-   if ( file / ) >/dev/null 2>&1; then
-     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-     lt_cv_file_magic_cmd='func_win32_libid'
-   else
-     lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-     lt_cv_file_magic_cmd='$OBJDUMP -f'
-   fi
-   ;;
 +
- cegcc)
-   # use the weaker test based on 'objdump'. See mingw*.
-   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-   lt_cv_file_magic_cmd='$OBJDUMP -f'
-   ;;
 +
- darwin* | rhapsody*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
 +
- freebsd* | dragonfly*)
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-     case $host_cpu in
-     i*86 )
-       # Not sure whether the presence of OpenBSD here was a mistake.
-       # Let's accept both of them until this is cleared up.
-       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-       lt_cv_file_magic_cmd=/usr/bin/file
-       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-       ;;
-     esac
-   else
-     lt_cv_deplibs_check_method=pass_all
-   fi
-   ;;
 +
- gnu*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
 +
- hpux10.20* | hpux11*)
-   lt_cv_file_magic_cmd=/usr/bin/file
-   case $host_cpu in
-   ia64*)
-     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-     ;;
-   hppa*64*)
-     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-     ;;
-   *)
-     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-     lt_cv_file_magic_test_file=/usr/lib/libc.sl
-     ;;
-   esac
-   ;;
 +
- interix[3-9]*)
-   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-   lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-   ;;
 +
- irix5* | irix6* | nonstopux*)
-   case $LD in
-   *-32|*"-32 ") libmagic=32-bit;;
-   *-n32|*"-n32 ") libmagic=N32;;
-   *-64|*"-64 ") libmagic=64-bit;;
-   *) libmagic=never-match;;
-   esac
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- # This must be Linux ELF.
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- netbsd* | netbsdelf*-gnu)
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-   else
-     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-   fi
-   ;;
- 
- newos6*)
-   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-   lt_cv_file_magic_cmd=/usr/bin/file
-   lt_cv_file_magic_test_file=/usr/lib/libnls.so
-   ;;
- 
- *nto* | *qnx*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- openbsd*)
-   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-   else
-     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-   fi
-   ;;
- 
- osf3* | osf4* | osf5*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- rdos*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- solaris*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
- 
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-   lt_cv_deplibs_check_method=pass_all
-   ;;
 +
- sysv4 | sysv4.3*)
-   case $host_vendor in
-   motorola)
-     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-     lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-     ;;
-   ncr)
-     lt_cv_deplibs_check_method=pass_all
-     ;;
-   sequent)
-     lt_cv_file_magic_cmd='/bin/file'
-     lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-     ;;
-   sni)
-     lt_cv_file_magic_cmd='/bin/file'
-     lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-     lt_cv_file_magic_test_file=/lib/libc.so
-     ;;
-   siemens)
-     lt_cv_deplibs_check_method=pass_all
++# Check whether --with-gnu-ld was given.
++if test "${with_gnu_ld+set}" = set; then :
++  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
++else
++  with_gnu_ld=no
++fi
 +
-   pc)
-     lt_cv_deplibs_check_method=pass_all
++ac_prog=ld
++if test "$GCC" = yes; then
++  # Check if gcc -print-prog-name=ld gives a path.
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
++$as_echo_n "checking for ld used by $CC... " >&6; }
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
++    # Accept absolute paths.
++    [\\/]* | ?:[\\/]*)
++      re_direlt='/[^/][^/]*/\.\./'
++      # Canonicalize the pathname of ld
++      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
++      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
++      ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
++      done
++      test -z "$LD" && LD="$ac_prog"
++      ;;
++  "")
++    # If it fails, then pretend we aren't using GCC.
++    ac_prog=ld
 +    ;;
-   ;;
++  *)
++    # If it is relative, then search for the first ld in PATH.
++    with_gnu_ld=unknown
 +    ;;
 +  esac
- tpf*)
-   lt_cv_deplibs_check_method=pass_all
++elif test "$with_gnu_ld" = yes; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
++$as_echo_n "checking for GNU ld... " >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
++$as_echo_n "checking for non-GNU ld... " >&6; }
++fi
++if test "${lt_cv_path_LD+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -z "$LD"; then
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++      lt_cv_path_LD="$ac_dir/$ac_prog"
++      # Check to see if the program is GNU ld.  I'd rather use --version,
++      # but apparently some variants of GNU ld only accept -v.
++      # Break only if it was the GNU/non-GNU ld that we prefer.
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
++      test "$with_gnu_ld" != no && break
++      ;;
++      *)
++      test "$with_gnu_ld" != yes && break
++      ;;
++      esac
++    fi
++  done
++  IFS="$lt_save_ifs"
++else
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi
++fi
 +
- 
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
++$as_echo "$LD" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
++$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
++if test "${lt_cv_prog_gnu_ld+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  # I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
 +  ;;
 +esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
- $as_echo "$lt_cv_deplibs_check_method" >&6; }
- file_magic_cmd=$lt_cv_file_magic_cmd
- deplibs_check_method=$lt_cv_deplibs_check_method
- test -z "$deplibs_check_method" && deplibs_check_method=unknown
- 
- 
- 
 +fi
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
- set dummy ${ac_tool_prefix}ar; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
++$as_echo "$lt_cv_prog_gnu_ld" >&6; }
++with_gnu_ld=$lt_cv_prog_gnu_ld
 +
 +
 +
 +
 +
 +
 +
 +
 +
- if test "${ac_cv_prog_AR+set}" = set; then :
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
++$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
++if test "${lt_cv_path_NM+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$NM"; then
++  # Let the user override the test.
++  lt_cv_path_NM="$NM"
++else
++  lt_nm_to_check="${ac_tool_prefix}nm"
++  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++    lt_nm_to_check="$lt_nm_to_check nm"
++  fi
++  for lt_tmp_nm in $lt_nm_to_check; do
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++      IFS="$lt_save_ifs"
++      test -z "$ac_dir" && ac_dir=.
++      tmp_nm="$ac_dir/$lt_tmp_nm"
++      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++      # Check to see if the nm accepts a BSD-compat flag.
++      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++      #   nm: unknown option "B" ignored
++      # Tru64's nm complains that /dev/null is an invalid object file
++      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++      */dev/null* | *'Invalid file or object type'*)
++        lt_cv_path_NM="$tmp_nm -B"
++        break
++        ;;
++      *)
++        case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++        */dev/null*)
++          lt_cv_path_NM="$tmp_nm -p"
++          break
++          ;;
++        *)
++          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++          continue # so that we can try to find one that supports BSD flags
++          ;;
++        esac
++        ;;
++      esac
++      fi
++    done
++    IFS="$lt_save_ifs"
++  done
++  : ${lt_cv_path_NM=no}
++fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
++$as_echo "$lt_cv_path_NM" >&6; }
++if test "$lt_cv_path_NM" != "no"; then
++  NM="$lt_cv_path_NM"
++else
++  # Didn't find any BSD compatible name lister, look for dumpbin.
++  if test -n "$ac_tool_prefix"; then
++  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
++  do
++    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$AR"; then
-   ac_cv_prog_AR="$AR" # Let the user override the test.
++if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_AR="${ac_tool_prefix}ar"
++  if test -n "$DUMPBIN"; then
++  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- AR=$ac_cv_prog_AR
- if test -n "$AR"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
- $as_echo "$AR" >&6; }
++    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
- if test -z "$ac_cv_prog_AR"; then
-   ac_ct_AR=$AR
-   # Extract the first word of "ar", so it can be a program name with args.
- set dummy ar; ac_word=$2
++DUMPBIN=$ac_cv_prog_DUMPBIN
++if test -n "$DUMPBIN"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
++$as_echo "$DUMPBIN" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
++    test -n "$DUMPBIN" && break
++  done
 +fi
- if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
++if test -z "$DUMPBIN"; then
++  ac_ct_DUMPBIN=$DUMPBIN
++  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$ac_ct_AR"; then
-   ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
++if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_ac_ct_AR="ar"
++  if test -n "$ac_ct_DUMPBIN"; then
++  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_ct_AR=$ac_cv_prog_ac_ct_AR
- if test -n "$ac_ct_AR"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
- $as_echo "$ac_ct_AR" >&6; }
++    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
-   if test "x$ac_ct_AR" = x; then
-     AR="false"
++ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
++if test -n "$ac_ct_DUMPBIN"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
++$as_echo "$ac_ct_DUMPBIN" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
-     AR=$ac_ct_AR
++
++  test -n "$ac_ct_DUMPBIN" && break
++done
++
++  if test "x$ac_ct_DUMPBIN" = x; then
++    DUMPBIN=":"
 +  else
 +    case $cross_compiling:$ac_tool_warned in
 +yes:)
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 +ac_tool_warned=yes ;;
 +esac
- else
-   AR="$ac_cv_prog_AR"
++    DUMPBIN=$ac_ct_DUMPBIN
 +  fi
- test -z "$AR" && AR=ar
- test -z "$AR_FLAGS" && AR_FLAGS=cru
- 
- 
- 
- 
 +fi
 +
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
- set dummy ${ac_tool_prefix}strip; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_STRIP+set}" = set; then :
 +
++  if test "$DUMPBIN" != ":"; then
++    NM="$DUMPBIN"
++  fi
++fi
++test -z "$NM" && NM=nm
 +
 +
 +
 +
 +
 +
-   if test -n "$STRIP"; then
-   ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
++$as_echo_n "checking the name lister ($NM) interface... " >&6; }
++if test "${lt_cv_nm_interface+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- done
-   done
- IFS=$as_save_IFS
- 
- fi
- fi
- STRIP=$ac_cv_prog_STRIP
- if test -n "$STRIP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
- $as_echo "$STRIP" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
- 
++  lt_cv_nm_interface="BSD nm"
++  echo "int some_variable = 0;" > conftest.$ac_ext
++  (eval echo "\"\$as_me:5151: $ac_compile\"" >&5)
++  (eval "$ac_compile" 2>conftest.err)
++  cat conftest.err >&5
++  (eval echo "\"\$as_me:5154: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
++  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
++  cat conftest.err >&5
++  (eval echo "\"\$as_me:5157: output\"" >&5)
++  cat conftest.out >&5
++  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
++    lt_cv_nm_interface="MS dumpbin"
 +  fi
- if test -z "$ac_cv_prog_STRIP"; then
-   ac_ct_STRIP=$STRIP
-   # Extract the first word of "strip", so it can be a program name with args.
- set dummy strip; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_STRIP"; then
-   ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_STRIP="strip"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  rm -f conftest*
 +fi
- fi
- fi
- ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
- if test -n "$ac_ct_STRIP"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
- $as_echo "$ac_ct_STRIP" >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
++$as_echo "$lt_cv_nm_interface" >&6; }
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
++$as_echo_n "checking whether ln -s works... " >&6; }
++LN_S=$as_ln_s
++if test "$LN_S" = "ln -s"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
 +else
-   if test "x$ac_ct_STRIP" = x; then
-     STRIP=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     STRIP=$ac_ct_STRIP
-   fi
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
++$as_echo "no, using $LN_S" >&6; }
 +fi
 +
-   STRIP="$ac_cv_prog_STRIP"
- fi
- 
- test -z "$STRIP" && STRIP=:
- 
- 
++# find the maximum length of command line arguments
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
++$as_echo_n "checking the maximum length of command line arguments... " >&6; }
++if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
- set dummy ${ac_tool_prefix}ranlib; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_RANLIB+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$RANLIB"; then
-   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++    i=0
++  teststring="ABCD"
 +
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
 +
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
 +
++  cygwin* | mingw* | cegcc*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
 +
- fi
- fi
- RANLIB=$ac_cv_prog_RANLIB
- if test -n "$RANLIB"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
- $as_echo "$RANLIB" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
 +
- fi
- if test -z "$ac_cv_prog_RANLIB"; then
-   ac_ct_RANLIB=$RANLIB
-   # Extract the first word of "ranlib", so it can be a program name with args.
- set dummy ranlib; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_RANLIB"; then
-   ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_RANLIB="ranlib"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
- 
- fi
- fi
- ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
- if test -n "$ac_ct_RANLIB"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
- $as_echo "$ac_ct_RANLIB" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
- 
-   if test "x$ac_ct_RANLIB" = x; then
-     RANLIB=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     RANLIB=$ac_ct_RANLIB
-   fi
- else
-   RANLIB="$ac_cv_prog_RANLIB"
- fi
- 
- test -z "$RANLIB" && RANLIB=:
- 
- 
- 
- 
- 
- 
- # Determine commands to create old-style static archives.
- old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
- old_postinstall_cmds='chmod 644 $oldlib'
- old_postuninstall_cmds=
- 
- if test -n "$RANLIB"; then
-   case $host_os in
-   openbsd*)
-     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536     # usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
 +
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
 +
-     old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[        ]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
 +    ;;
 +  *)
-   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
- fi
- 
- 
++    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++    if test -n "$lt_cv_sys_max_cmd_len"; then
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    else
++      # Make teststring a little bigger before we do anything with it.
++      # a 1K string should be a reasonable start.
++      for i in 1 2 3 4 5 6 7 8 ; do
++        teststring=$teststring$teststring
++      done
++      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++      # If test is not a shell built-in, we'll probably end up computing a
++      # maximum length that is only half of the actual maximum length, but
++      # we can't tell.
++      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
++               = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++            test $i != 17 # 1/2 MB should be enough
++      do
++        i=`expr $i + 1`
++        teststring=$teststring$teststring
++      done
++      # Only check the string length outside the loop.
++      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++      teststring=
++      # Add a significant safety factor because C++ compilers can tack on
++      # massive amounts of additional arguments before passing them to the
++      # linker.  It appears as though 1/2 is a usable value.
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    fi
 +    ;;
 +  esac
- # If no C compiler was specified, use CC.
- LTCC=${LTCC-"$CC"}
 +
++fi
 +
++if test -n $lt_cv_sys_max_cmd_len ; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
++$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
++$as_echo "none" >&6; }
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
 +
 +
 +
 +
 +
 +
++: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
++$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
++      = c,a/b,, \
++    && eval 'test $(( 1 + 1 )) -eq 2 \
++    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++  && xsi_shell=yes
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
++$as_echo "$xsi_shell" >&6; }
 +
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
++$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
++    >/dev/null 2>&1 \
++  && lt_shell_append=yes
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
++$as_echo "$lt_shell_append" >&6; }
 +
 +
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++  lt_unset=unset
++else
++  lt_unset=false
++fi
 +
 +
 +
 +
 +
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++  lt_SP2NL='tr \040 \012'
++  lt_NL2SP='tr \015\012 \040\040'
++  ;;
++ *) # EBCDIC based system
++  lt_SP2NL='tr \100 \n'
++  lt_NL2SP='tr \r\n \100\100'
++  ;;
++esac
 +
 +
 +
 +
 +
 +
 +
 +
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
++$as_echo_n "checking for $LD option to reload object files... " >&6; }
++if test "${lt_cv_ld_reload_flag+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_ld_reload_flag='-r'
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
++$as_echo "$lt_cv_ld_reload_flag" >&6; }
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++  darwin*)
++    if test "$GCC" = yes; then
++      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++    else
++      reload_cmds='$LD$reload_flag -o $output$reload_objs'
++    fi
++    ;;
++esac
 +
 +
 +
 +
 +
- # If no C compiler flags were specified, use CFLAGS.
- LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 +
- # Allow CC to be a program name with arguments.
- compiler=$CC
 +
- # Check for command to grab the raw symbol name followed by C symbol from nm.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
- $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
- if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
 +
 +
- # These are sane defaults that work on at least a few old systems.
- # [They come from Ultrix.  What could be older than Ultrix?!! ;)]
- 
- # Character class describing NM global symbol codes.
- symcode='[BCDEGRST]'
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
++set dummy ${ac_tool_prefix}objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
++  if test -n "$OBJDUMP"; then
++  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
- # Regexp to match symbols that can be accessed directly from C.
- sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
++fi
++fi
++OBJDUMP=$ac_cv_prog_OBJDUMP
++if test -n "$OBJDUMP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
++$as_echo "$OBJDUMP" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
- # Define system-specific variables.
- case $host_os in
- aix*)
-   symcode='[BCDT]'
-   ;;
- cygwin* | mingw* | pw32* | cegcc*)
-   symcode='[ABCDGISTW]'
-   ;;
- hpux*)
-   if test "$host_cpu" = ia64; then
-     symcode='[ABCDEGRST]'
 +
- irix* | nonstopux*)
-   symcode='[BCDEGRST]'
-   ;;
- osf*)
-   symcode='[BCDEGQRST]'
++fi
++if test -z "$ac_cv_prog_OBJDUMP"; then
++  ac_ct_OBJDUMP=$OBJDUMP
++  # Extract the first word of "objdump", so it can be a program name with args.
++set dummy objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_OBJDUMP"; then
++  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_OBJDUMP="objdump"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
 +  fi
++done
++  done
++IFS=$as_save_IFS
++
++fi
++fi
++ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
++if test -n "$ac_ct_OBJDUMP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
++$as_echo "$ac_ct_OBJDUMP" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++  if test "x$ac_ct_OBJDUMP" = x; then
++    OBJDUMP="false"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    OBJDUMP=$ac_ct_OBJDUMP
++  fi
++else
++  OBJDUMP="$ac_cv_prog_OBJDUMP"
++fi
++
++test -z "$OBJDUMP" && OBJDUMP=objdump
++
++
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
++$as_echo_n "checking how to recognize dependent libraries... " >&6; }
++if test "${lt_cv_deplibs_check_method+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[4-9]*)
++  lt_cv_deplibs_check_method=pass_all
 +  ;;
- solaris*)
-   symcode='[BDRT]'
++
++beos*)
++  lt_cv_deplibs_check_method=pass_all
 +  ;;
- sco3.2v5*)
-   symcode='[DT]'
++
++bsdi[45]*)
++  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
++  lt_cv_file_magic_cmd='/usr/bin/file -L'
++  lt_cv_file_magic_test_file=/shlib/libc.so
 +  ;;
- sysv4.2uw2*)
-   symcode='[DT]'
++
++cygwin*)
++  # func_win32_libid is a shell function defined in ltmain.sh
++  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++  lt_cv_file_magic_cmd='func_win32_libid'
 +  ;;
- sysv5* | sco5v6* | unixware* | OpenUNIX*)
-   symcode='[ABDT]'
++
++mingw* | pw32*)
++  # Base MSYS/MinGW do not provide the 'file' command needed by
++  # func_win32_libid shell function, so use a weaker test based on 'objdump',
++  # unless we find 'file', for example because we are cross-compiling.
++  if ( file / ) >/dev/null 2>&1; then
++    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++    lt_cv_file_magic_cmd='func_win32_libid'
++  else
++    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++    lt_cv_file_magic_cmd='$OBJDUMP -f'
++  fi
 +  ;;
- sysv4)
-   symcode='[DFNSTU]'
++
++cegcc)
++  # use the weaker test based on 'objdump'. See mingw*.
++  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
++  lt_cv_file_magic_cmd='$OBJDUMP -f'
 +  ;;
- esac
++
++darwin* | rhapsody*)
++  lt_cv_deplibs_check_method=pass_all
 +  ;;
- # If we're using GNU nm, then use its standard symbol codes.
- case `$NM -V 2>&1` in
- *GNU* | *'with BFD'*)
-   symcode='[ABCDGIRSTW]' ;;
- esac
 +
- # Transform an extracted symbol line into a proper C declaration.
- # Some systems (esp. on ia64) link data and code symbols differently,
- # so use this general approach.
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++freebsd* | dragonfly*)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    case $host_cpu in
++    i*86 )
++      # Not sure whether the presence of OpenBSD here was a mistake.
++      # Let's accept both of them until this is cleared up.
++      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
++      lt_cv_file_magic_cmd=/usr/bin/file
++      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++      ;;
++    esac
++  else
++    lt_cv_deplibs_check_method=pass_all
++  fi
++  ;;
 +
- # Transform an extracted symbol line into symbol name and symbol address
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
- lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
++gnu*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
- # Handle CRLF in mingw tool chain
- opt_cr=
- case $build_os in
- mingw*)
-   opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++hpux10.20* | hpux11*)
++  lt_cv_file_magic_cmd=/usr/bin/file
++  case $host_cpu in
++  ia64*)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
++    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++    ;;
++  hppa*64*)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
++    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++    ;;
++  *)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
++    lt_cv_file_magic_test_file=/usr/lib/libc.sl
++    ;;
++  esac
++  ;;
 +
- esac
++interix[3-9]*)
++  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
 +  ;;
- # Try without a prefix underscore, then with it.
- for ac_symprfx in "" "_"; do
 +
-   # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-   symxfrm="\\1 $ac_symprfx\\2 \\2"
++irix5* | irix6* | nonstopux*)
++  case $LD in
++  *-32|*"-32 ") libmagic=32-bit;;
++  *-n32|*"-n32 ") libmagic=N32;;
++  *-64|*"-64 ") libmagic=64-bit;;
++  *) libmagic=never-match;;
++  esac
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
-   # Write the raw and C identifiers.
-   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-     # Fake it for dumpbin and say T for any non-static function
-     # and D for any global variable.
-     # Also find C++ and __fastcall symbols from MSVC++,
-     # which start with @ or ?.
-     lt_cv_sys_global_symbol_pipe="$AWK '"\
- "     {last_section=section; section=\$ 3};"\
- "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
- "     \$ 0!~/External *\|/{next};"\
- "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
- "     {if(hide[section]) next};"\
- "     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
- "     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
- "     s[1]~/^[@?]/{print s[1], s[1]; next};"\
- "     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
- "     ' prfx=^$ac_symprfx"
++# This must be Linux ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
-     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[    ]\($symcode$symcode*\)[         ][      ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++netbsd* | netbsdelf*-gnu)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
 +  else
-   # Check to see that the pipe works correctly.
-   pipe_works=no
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
 +  fi
++  ;;
 +
-   rm -f conftest*
-   cat > conftest.$ac_ext <<_LT_EOF
- #ifdef __cplusplus
- extern "C" {
- #endif
- char nm_test_var;
- void nm_test_func(void);
- void nm_test_func(void){}
- #ifdef __cplusplus
- }
- #endif
- int main(){nm_test_var='a';nm_test_func();return(0);}
- _LT_EOF
++newos6*)
++  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
++  lt_cv_file_magic_cmd=/usr/bin/file
++  lt_cv_file_magic_test_file=/usr/lib/libnls.so
++  ;;
 +
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then
-     # Now try to grab the symbols.
-     nlist=conftest.nm
-     if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
-   (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } && test -s "$nlist"; then
-       # Try sorting and uniquifying the output.
-       if sort "$nlist" | uniq > "$nlist"T; then
-       mv -f "$nlist"T "$nlist"
-       else
-       rm -f "$nlist"T
-       fi
- 
-       # Make sure that we snagged all the symbols we need.
-       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-       if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-         cat <<_LT_EOF > conftest.$ac_ext
- #ifdef __cplusplus
- extern "C" {
- #endif
++*nto* | *qnx*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
- _LT_EOF
-         # Now generate the symbol file.
-         eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
++openbsd*)
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
++  fi
++  ;;
 +
-         cat <<_LT_EOF >> conftest.$ac_ext
++osf3* | osf4* | osf5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
- /* The mapping between symbol names and symbols.  */
- const struct {
-   const char *name;
-   void       *address;
- }
- lt__PROGRAM__LTX_preloaded_symbols[] =
- {
-   { "@PROGRAM@", (void *) 0 },
- _LT_EOF
-         $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-         cat <<\_LT_EOF >> conftest.$ac_ext
-   {0, (void *) 0}
- };
++rdos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
- /* This works around a problem in FreeBSD linker */
- #ifdef FREEBSD_WORKAROUND
- static const void *lt_preloaded_setup() {
-   return lt__PROGRAM__LTX_preloaded_symbols;
- }
- #endif
++solaris*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
- #ifdef __cplusplus
- }
- #endif
- _LT_EOF
-         # Now try linking the two files.
-         mv conftest.$ac_objext conftstm.$ac_objext
-         lt_save_LIBS="$LIBS"
-         lt_save_CFLAGS="$CFLAGS"
-         LIBS="conftstm.$ac_objext"
-         CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-         if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-   (eval $ac_link) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } && test -s conftest${ac_exeext}; then
-           pipe_works=yes
-         fi
-         LIBS="$lt_save_LIBS"
-         CFLAGS="$lt_save_CFLAGS"
-       else
-         echo "cannot find nm_test_func in $nlist" >&5
-       fi
-       else
-       echo "cannot find nm_test_var in $nlist" >&5
-       fi
-     else
-       echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-     fi
-   else
-     echo "$progname: failed program was:" >&5
-     cat conftest.$ac_ext >&5
-   fi
-   rm -rf conftest* conftst*
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
 +
-   # Do not use the global_symbol_pipe unless it works.
-   if test "$pipe_works" = yes; then
-     break
-   else
-     lt_cv_sys_global_symbol_pipe=
-   fi
- done
++sysv4 | sysv4.3*)
++  case $host_vendor in
++  motorola)
++    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
++    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++    ;;
++  ncr)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  sequent)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
++    ;;
++  sni)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
++    lt_cv_file_magic_test_file=/lib/libc.so
++    ;;
++  siemens)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  pc)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  esac
++  ;;
 +
- if test -z "$lt_cv_sys_global_symbol_pipe"; then
-   lt_cv_sys_global_symbol_to_cdecl=
- fi
- if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
- $as_echo "failed" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
- $as_echo "ok" >&6; }
- fi
++tpf*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++esac
 +
 +fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
++$as_echo "$lt_cv_deplibs_check_method" >&6; }
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
 +
- # Check whether --enable-libtool-lock was given.
- if test "${enable_libtool_lock+set}" = set; then :
-   enableval=$enable_libtool_lock;
- fi
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ar; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_AR+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$AR"; then
++  ac_cv_prog_AR="$AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_AR="${ac_tool_prefix}ar"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++AR=$ac_cv_prog_AR
++if test -n "$AR"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
++$as_echo "$AR" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++fi
++if test -z "$ac_cv_prog_AR"; then
++  ac_ct_AR=$AR
++  # Extract the first word of "ar", so it can be a program name with args.
++set dummy ar; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_AR"; then
++  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_AR="ar"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++ac_ct_AR=$ac_cv_prog_ac_ct_AR
++if test -n "$ac_ct_AR"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
++$as_echo "$ac_ct_AR" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
++  if test "x$ac_ct_AR" = x; then
++    AR="false"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    AR=$ac_ct_AR
++  fi
++else
++  AR="$ac_cv_prog_AR"
++fi
 +
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
 +
 +
 +
 +
 +
 +
- test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 +
- # Some flags need to be propagated to the compiler or linker for good
- # libtool support.
- case $host in
- ia64-*-hpux*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then
-     case `/usr/bin/file conftest.$ac_objext` in
-       *ELF-32*)
-       HPUX_IA64_MODE="32"
-       ;;
-       *ELF-64*)
-       HPUX_IA64_MODE="64"
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- *-*-irix6*)
-   # Find out which ABI we are using.
-   echo '#line 5851 "configure"' > conftest.$ac_ext
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then
-     if test "$lt_cv_prog_gnu_ld" = yes; then
-       case `/usr/bin/file conftest.$ac_objext` in
-       *32-bit*)
-         LD="${LD-ld} -melf32bsmip"
-         ;;
-       *N32*)
-         LD="${LD-ld} -melf32bmipn32"
-         ;;
-       *64-bit*)
-         LD="${LD-ld} -melf64bmip"
-       ;;
-       esac
-     else
-       case `/usr/bin/file conftest.$ac_objext` in
-       *32-bit*)
-         LD="${LD-ld} -32"
-         ;;
-       *N32*)
-         LD="${LD-ld} -n32"
-         ;;
-       *64-bit*)
-         LD="${LD-ld} -64"
-         ;;
-       esac
-     fi
-   fi
-   rm -rf conftest*
-   ;;
- 
- x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
- s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then
-     case `/usr/bin/file conftest.o` in
-       *32-bit*)
-       case $host in
-         x86_64-*kfreebsd*-gnu)
-           LD="${LD-ld} -m elf_i386_fbsd"
-           ;;
-         x86_64-*linux*)
-           LD="${LD-ld} -m elf_i386"
-           ;;
-         ppc64-*linux*|powerpc64-*linux*)
-           LD="${LD-ld} -m elf32ppclinux"
-           ;;
-         s390x-*linux*)
-           LD="${LD-ld} -m elf_s390"
-           ;;
-         sparc64-*linux*)
-           LD="${LD-ld} -m elf32_sparc"
-           ;;
-       esac
-       ;;
-       *64-bit*)
-       case $host in
-         x86_64-*kfreebsd*-gnu)
-           LD="${LD-ld} -m elf_x86_64_fbsd"
-           ;;
-         x86_64-*linux*)
-           LD="${LD-ld} -m elf_x86_64"
-           ;;
-         ppc*-*linux*|powerpc*-*linux*)
-           LD="${LD-ld} -m elf64ppc"
-           ;;
-         s390*-*linux*|s390*-*tpf*)
-           LD="${LD-ld} -m elf64_s390"
-           ;;
-         sparc*-*linux*)
-           LD="${LD-ld} -m elf64_sparc"
-           ;;
-       esac
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- 
- *-*-sco3.2v5*)
-   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-   SAVE_CFLAGS="$CFLAGS"
-   CFLAGS="$CFLAGS -belf"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
- $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
- if test "${lt_cv_cc_needs_belf+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- int
- main ()
- {
- 
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   lt_cv_cc_needs_belf=yes
- else
-   lt_cv_cc_needs_belf=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
-      ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
- $as_echo "$lt_cv_cc_needs_belf" >&6; }
-   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-     CFLAGS="$SAVE_CFLAGS"
-   fi
-   ;;
- sparc*-*solaris*)
-   # Find out which ABI we are using.
-   echo 'int i;' > conftest.$ac_ext
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }; then
-     case `/usr/bin/file conftest.o` in
-     *64-bit*)
-       case $lt_cv_prog_gnu_ld in
-       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-       *)
-       if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-         LD="${LD-ld} -64"
-       fi
-       ;;
-       esac
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- esac
 +
- need_locks="$enable_libtool_lock"
 +
-   case $host_os in
-     rhapsody* | darwin*)
-     if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
- set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
 +
 +
- if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$DSYMUTIL"; then
-   ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
++if test "${ac_cv_prog_STRIP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
++  if test -n "$STRIP"; then
++  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- DSYMUTIL=$ac_cv_prog_DSYMUTIL
- if test -n "$DSYMUTIL"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
- $as_echo "$DSYMUTIL" >&6; }
++    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
- if test -z "$ac_cv_prog_DSYMUTIL"; then
-   ac_ct_DSYMUTIL=$DSYMUTIL
-   # Extract the first word of "dsymutil", so it can be a program name with args.
- set dummy dsymutil; ac_word=$2
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
++$as_echo "$STRIP" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +fi
- if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
++if test -z "$ac_cv_prog_STRIP"; then
++  ac_ct_STRIP=$STRIP
++  # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$ac_ct_DSYMUTIL"; then
-   ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
++  if test -n "$ac_ct_STRIP"; then
++  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
- if test -n "$ac_ct_DSYMUTIL"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
- $as_echo "$ac_ct_DSYMUTIL" >&6; }
++    ac_cv_prog_ac_ct_STRIP="strip"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
-   if test "x$ac_ct_DSYMUTIL" = x; then
-     DSYMUTIL=":"
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
++$as_echo "$ac_ct_STRIP" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
-     DSYMUTIL=$ac_ct_DSYMUTIL
++  if test "x$ac_ct_STRIP" = x; then
++    STRIP=":"
 +  else
 +    case $cross_compiling:$ac_tool_warned in
 +yes:)
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 +ac_tool_warned=yes ;;
 +esac
-   DSYMUTIL="$ac_cv_prog_DSYMUTIL"
++    STRIP=$ac_ct_STRIP
 +  fi
 +else
-     if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
- set dummy ${ac_tool_prefix}nmedit; ac_word=$2
++  STRIP="$ac_cv_prog_STRIP"
 +fi
 +
- if test "${ac_cv_prog_NMEDIT+set}" = set; then :
++test -z "$STRIP" && STRIP=:
++
++
++
++
++
++
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$NMEDIT"; then
-   ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
++if test "${ac_cv_prog_RANLIB+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
++  if test -n "$RANLIB"; then
++  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- NMEDIT=$ac_cv_prog_NMEDIT
- if test -n "$NMEDIT"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
- $as_echo "$NMEDIT" >&6; }
++    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
- if test -z "$ac_cv_prog_NMEDIT"; then
-   ac_ct_NMEDIT=$NMEDIT
-   # Extract the first word of "nmedit", so it can be a program name with args.
- set dummy nmedit; ac_word=$2
++RANLIB=$ac_cv_prog_RANLIB
++if test -n "$RANLIB"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
++$as_echo "$RANLIB" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +fi
- if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
++if test -z "$ac_cv_prog_RANLIB"; then
++  ac_ct_RANLIB=$RANLIB
++  # Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
-   if test -n "$ac_ct_NMEDIT"; then
-   ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-     ac_cv_prog_ac_ct_NMEDIT="nmedit"
++  if test -n "$ac_ct_RANLIB"; then
++  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
- if test -n "$ac_ct_NMEDIT"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
- $as_echo "$ac_ct_NMEDIT" >&6; }
++    ac_cv_prog_ac_ct_RANLIB="ranlib"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
-   if test "x$ac_ct_NMEDIT" = x; then
-     NMEDIT=":"
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
++$as_echo "$ac_ct_RANLIB" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
-     NMEDIT=$ac_ct_NMEDIT
++  if test "x$ac_ct_RANLIB" = x; then
++    RANLIB=":"
 +  else
 +    case $cross_compiling:$ac_tool_warned in
 +yes:)
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 +ac_tool_warned=yes ;;
 +esac
-   NMEDIT="$ac_cv_prog_NMEDIT"
++    RANLIB=$ac_ct_RANLIB
 +  fi
 +else
-     if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
- set dummy ${ac_tool_prefix}lipo; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_LIPO+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$LIPO"; then
-   ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  RANLIB="$ac_cv_prog_RANLIB"
 +fi
 +
- fi
- fi
- LIPO=$ac_cv_prog_LIPO
- if test -n "$LIPO"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
- $as_echo "$LIPO" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++test -z "$RANLIB" && RANLIB=:
 +
- fi
- if test -z "$ac_cv_prog_LIPO"; then
-   ac_ct_LIPO=$LIPO
-   # Extract the first word of "lipo", so it can be a program name with args.
- set dummy lipo; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_LIPO"; then
-   ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_LIPO="lipo"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
 +
 +
- fi
- fi
- ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
- if test -n "$ac_ct_LIPO"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
- $as_echo "$ac_ct_LIPO" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +
-   if test "x$ac_ct_LIPO" = x; then
-     LIPO=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     LIPO=$ac_ct_LIPO
-   fi
- else
-   LIPO="$ac_cv_prog_LIPO"
- fi
 +
-     if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
- set dummy ${ac_tool_prefix}otool; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_OTOOL+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$OTOOL"; then
-   ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
 +
- fi
- fi
- OTOOL=$ac_cv_prog_OTOOL
- if test -n "$OTOOL"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
- $as_echo "$OTOOL" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
 +
- fi
- if test -z "$ac_cv_prog_OTOOL"; then
-   ac_ct_OTOOL=$OTOOL
-   # Extract the first word of "otool", so it can be a program name with args.
- set dummy otool; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_OTOOL"; then
-   ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_OTOOL="otool"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 +fi
 +
 +
- fi
- fi
- ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
- if test -n "$ac_ct_OTOOL"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
- $as_echo "$ac_ct_OTOOL" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +
-   if test "x$ac_ct_OTOOL" = x; then
-     OTOOL=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     OTOOL=$ac_ct_OTOOL
-   fi
- else
-   OTOOL="$ac_cv_prog_OTOOL"
- fi
 +
-     if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
- set dummy ${ac_tool_prefix}otool64; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_OTOOL64+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$OTOOL64"; then
-   ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
 +
- fi
- fi
- OTOOL64=$ac_cv_prog_OTOOL64
- if test -n "$OTOOL64"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
- $as_echo "$OTOOL64" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +
- fi
- if test -z "$ac_cv_prog_OTOOL64"; then
-   ac_ct_OTOOL64=$OTOOL64
-   # Extract the first word of "otool64", so it can be a program name with args.
- set dummy otool64; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$ac_ct_OTOOL64"; then
-   ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
- else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_OTOOL64="otool64"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
 +
 +
- fi
- fi
- ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
- if test -n "$ac_ct_OTOOL64"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
- $as_echo "$ac_ct_OTOOL64" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +
-   if test "x$ac_ct_OTOOL64" = x; then
-     OTOOL64=":"
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     OTOOL64=$ac_ct_OTOOL64
-   fi
- else
-   OTOOL64="$ac_cv_prog_OTOOL64"
- fi
 +
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
- $as_echo_n "checking for -single_module linker flag... " >&6; }
- if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   lt_cv_apple_cc_single_mod=no
-       if test -z "${LT_MULTI_MODULE}"; then
-       # By default we will add the -single_module flag. You can override
-       # by either setting the environment variable LT_MULTI_MODULE
-       # non-empty at configure time, or by adding -multi_module to the
-       # link flags.
-       rm -rf libconftest.dylib*
-       echo "int foo(void){return 1;}" > conftest.c
-       echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c" >&5
-       $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-         -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-         _lt_result=$?
-       if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-         lt_cv_apple_cc_single_mod=yes
-       else
-         cat conftest.err >&5
-       fi
-       rm -rf libconftest.dylib*
-       rm -f conftest.*
-       fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
- $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
- $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
- if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
 +
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 +
++# Allow CC to be a program name with arguments.
++compiler=$CC
 +
-   lt_cv_ld_exported_symbols_list=no
-       save_LDFLAGS=$LDFLAGS
-       echo "_main" > conftest.sym
-       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
++$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   lt_cv_ld_exported_symbols_list=yes
- else
-   lt_cv_ld_exported_symbols_list=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
-       LDFLAGS="$save_LDFLAGS"
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 +
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
- $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-     case $host_os in
-     rhapsody* | darwin1.[012])
-       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-     darwin1.*)
-       _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-     darwin*) # darwin 5.x on
-       # if running on 10.5 or later, the deployment target defaults
-       # to the OS version, if on x86, and 10.4, the deployment
-       # target defaults to 10.4. Don't you love it?
-       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-       10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-       10.[012]*)
-         _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-       10.*)
-         _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-       esac
-     ;;
-   esac
-     if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-       _lt_dar_single_mod='$single_module'
-     fi
-     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-     else
-       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-     fi
-     if test "$DSYMUTIL" != ":"; then
-       _lt_dsymutil='~$DSYMUTIL $lib || :'
-     else
-       _lt_dsymutil=
-     fi
-     ;;
-   esac
++# Character class describing NM global symbol codes.
++symcode='[BCDEGRST]'
 +
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
- $as_echo_n "checking how to run the C preprocessor... " >&6; }
- # On Suns, sometimes $CPP names a directory.
- if test -n "$CPP" && test -d "$CPP"; then
-   CPP=
- fi
- if test -z "$CPP"; then
-   if test "${ac_cv_prog_CPP+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-       # Double quotes because CPP needs to be expanded
-     for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-     do
-       ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-   # Use a header file that comes with gcc, so configuring glibc
-   # with a fresh cross-compiler works.
-   # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-   # <limits.h> exists even on freestanding compilers.
-   # On the NeXT, cc -E runs the code through the compiler's parser,
-   # not just through cpp. "Syntax error" is here to catch this case.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #ifdef __STDC__
- # include <limits.h>
- #else
- # include <assert.h>
- #endif
-                    Syntax error
- _ACEOF
- if ac_fn_c_try_cpp "$LINENO"; then :
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 +
- else
-   # Broken: fails on valid input.
- continue
- fi
- rm -f conftest.err conftest.i conftest.$ac_ext
++# Define system-specific variables.
++case $host_os in
++aix*)
++  symcode='[BCDT]'
++  ;;
++cygwin* | mingw* | pw32* | cegcc*)
++  symcode='[ABCDGISTW]'
++  ;;
++hpux*)
++  if test "$host_cpu" = ia64; then
++    symcode='[ABCDEGRST]'
++  fi
++  ;;
++irix* | nonstopux*)
++  symcode='[BCDEGRST]'
++  ;;
++osf*)
++  symcode='[BCDEGQRST]'
++  ;;
++solaris*)
++  symcode='[BDRT]'
++  ;;
++sco3.2v5*)
++  symcode='[DT]'
++  ;;
++sysv4.2uw2*)
++  symcode='[DT]'
++  ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++  symcode='[ABDT]'
++  ;;
++sysv4)
++  symcode='[DFNSTU]'
++  ;;
++esac
 +
-   # OK, works on sane cases.  Now check whether nonexistent headers
-   # can be detected and how.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ac_nonexistent.h>
- _ACEOF
- if ac_fn_c_try_cpp "$LINENO"; then :
-   # Broken: success on invalid input.
- continue
- else
-   # Passes both tests.
- ac_preproc_ok=:
- break
- fi
- rm -f conftest.err conftest.i conftest.$ac_ext
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++  symcode='[ABCDGIRSTW]' ;;
++esac
 +
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
- rm -f conftest.i conftest.err conftest.$ac_ext
- if $ac_preproc_ok; then :
-   break
- fi
++# Transform an extracted symbol line into a proper C declaration.
++# Some systems (esp. on ia64) link data and code symbols differently,
++# so use this general approach.
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 +
-     done
-     ac_cv_prog_CPP=$CPP
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 +
- fi
-   CPP=$ac_cv_prog_CPP
- else
-   ac_cv_prog_CPP=$CPP
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
- $as_echo "$CPP" >&6; }
- ac_preproc_ok=false
- for ac_c_preproc_warn_flag in '' yes
- do
-   # Use a header file that comes with gcc, so configuring glibc
-   # with a fresh cross-compiler works.
-   # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-   # <limits.h> exists even on freestanding compilers.
-   # On the NeXT, cc -E runs the code through the compiler's parser,
-   # not just through cpp. "Syntax error" is here to catch this case.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #ifdef __STDC__
- # include <limits.h>
- #else
- # include <assert.h>
- #endif
-                    Syntax error
- _ACEOF
- if ac_fn_c_try_cpp "$LINENO"; then :
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++  ;;
++esac
 +
- else
-   # Broken: fails on valid input.
- continue
- fi
- rm -f conftest.err conftest.i conftest.$ac_ext
++# Try without a prefix underscore, then with it.
++for ac_symprfx in "" "_"; do
 +
-   # OK, works on sane cases.  Now check whether nonexistent headers
-   # can be detected and how.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ac_nonexistent.h>
- _ACEOF
- if ac_fn_c_try_cpp "$LINENO"; then :
-   # Broken: success on invalid input.
- continue
- else
-   # Passes both tests.
- ac_preproc_ok=:
- break
- fi
- rm -f conftest.err conftest.i conftest.$ac_ext
++  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++  symxfrm="\\1 $ac_symprfx\\2 \\2"
 +
- done
- # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
- rm -f conftest.i conftest.err conftest.$ac_ext
- if $ac_preproc_ok; then :
++  # Write the raw and C identifiers.
++  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++    # Fake it for dumpbin and say T for any non-static function
++    # and D for any global variable.
++    # Also find C++ and __fastcall symbols from MSVC++,
++    # which start with @ or ?.
++    lt_cv_sys_global_symbol_pipe="$AWK '"\
++"     {last_section=section; section=\$ 3};"\
++"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
++"     \$ 0!~/External *\|/{next};"\
++"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
++"     {if(hide[section]) next};"\
++"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
++"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
++"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
++"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
++"     ' prfx=^$ac_symprfx"
++  else
++    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[    ]\($symcode$symcode*\)[         ][      ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++  fi
 +
- else
-   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
- See \`config.log' for more details" "$LINENO" 5 ; }
- fi
++  # Check to see that the pipe works correctly.
++  pipe_works=no
 +
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
++  rm -f conftest*
++  cat > conftest.$ac_ext <<_LT_EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(void);
++void nm_test_func(void){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++_LT_EOF
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
- $as_echo_n "checking for ANSI C header files... " >&6; }
- if test "${ac_cv_header_stdc+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdlib.h>
- #include <stdarg.h>
- #include <string.h>
- #include <float.h>
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then
++    # Now try to grab the symbols.
++    nlist=conftest.nm
++    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
++  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } && test -s "$nlist"; then
++      # Try sorting and uniquifying the output.
++      if sort "$nlist" | uniq > "$nlist"T; then
++      mv -f "$nlist"T "$nlist"
++      else
++      rm -f "$nlist"T
++      fi
 +
++      # Make sure that we snagged all the symbols we need.
++      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
++      if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
++        cat <<_LT_EOF > conftest.$ac_ext
++#ifdef __cplusplus
++extern "C" {
++#endif
 +
- int
- main ()
++_LT_EOF
++        # Now generate the symbol file.
++        eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 +
-   ;
-   return 0;
++        cat <<_LT_EOF >> conftest.$ac_ext
++
++/* The mapping between symbol names and symbols.  */
++const struct {
++  const char *name;
++  void       *address;
++}
++lt__PROGRAM__LTX_preloaded_symbols[] =
 +{
++  { "@PROGRAM@", (void *) 0 },
++_LT_EOF
++        $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
++        cat <<\_LT_EOF >> conftest.$ac_ext
++  {0, (void *) 0}
++};
 +
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_header_stdc=yes
- else
-   ac_cv_header_stdc=no
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++  return lt__PROGRAM__LTX_preloaded_symbols;
 +}
- if test $ac_cv_header_stdc = yes; then
-   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <string.h>
++#endif
 +
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-   $EGREP "memchr" >/dev/null 2>&1; then :
++#ifdef __cplusplus
++}
++#endif
++_LT_EOF
++        # Now try linking the two files.
++        mv conftest.$ac_objext conftstm.$ac_objext
++        lt_save_LIBS="$LIBS"
++        lt_save_CFLAGS="$CFLAGS"
++        LIBS="conftstm.$ac_objext"
++        CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
++        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
++          pipe_works=yes
++        fi
++        LIBS="$lt_save_LIBS"
++        CFLAGS="$lt_save_CFLAGS"
++      else
++        echo "cannot find nm_test_func in $nlist" >&5
++      fi
++      else
++      echo "cannot find nm_test_var in $nlist" >&5
++      fi
++    else
++      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
++    fi
++  else
++    echo "$progname: failed program was:" >&5
++    cat conftest.$ac_ext >&5
++  fi
++  rm -rf conftest* conftst*
 +
- else
-   ac_cv_header_stdc=no
++  # Do not use the global_symbol_pipe unless it works.
++  if test "$pipe_works" = yes; then
++    break
++  else
++    lt_cv_sys_global_symbol_pipe=
++  fi
++done
 +
- rm -f conftest*
 +fi
- if test $ac_cv_header_stdc = yes; then
-   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdlib.h>
 +
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++  lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
++$as_echo "failed" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
++$as_echo "ok" >&6; }
 +fi
 +
- _ACEOF
- if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-   $EGREP "free" >/dev/null 2>&1; then :
 +
- else
-   ac_cv_header_stdc=no
- fi
- rm -f conftest*
- 
- fi
- 
- if test $ac_cv_header_stdc = yes; then
-   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-   if test "$cross_compiling" = yes; then :
-   :
- else
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <ctype.h>
- #include <stdlib.h>
- #if ((' ' & 0x0FF) == 0x020)
- # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
- # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
- #else
- # define ISLOWER(c) \
-                  (('a' <= (c) && (c) <= 'i') \
-                    || ('j' <= (c) && (c) <= 'r') \
-                    || ('s' <= (c) && (c) <= 'z'))
- # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
- #endif
- 
- #define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
- int
- main ()
- {
-   int i;
-   for (i = 0; i < 256; i++)
-     if (XOR (islower (i), ISLOWER (i))
-       || toupper (i) != TOUPPER (i))
-       return 2;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_run "$LINENO"; then :
- 
- else
-   ac_cv_header_stdc=no
- fi
- rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
-   conftest.$ac_objext conftest.beam conftest.$ac_ext
- fi
- 
- fi
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
- $as_echo "$ac_cv_header_stdc" >&6; }
- if test $ac_cv_header_stdc = yes; then
- 
- $as_echo "#define STDC_HEADERS 1" >>confdefs.h
- 
- fi
- 
- # On IRIX 5.3, sys/types and inttypes.h are conflicting.
- for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-                 inttypes.h stdint.h unistd.h
- do :
-   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
- ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
- "
- if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
-   cat >>confdefs.h <<_ACEOF
- #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
- _ACEOF
 +
- fi
 +
- done
 +
- for ac_header in dlfcn.h
- do :
-   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
- "
- if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
-   cat >>confdefs.h <<_ACEOF
- #define HAVE_DLFCN_H 1
- _ACEOF
 +
 +
- fi
 +
- done
 +
- # Set options
- enable_dlopen=yes
- # Check whether --enable-static was given.
- if test "${enable_static+set}" = set; then :
-   enableval=$enable_static; p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_static=yes ;;
-     no) enable_static=no ;;
-     *)
-      enable_static=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_static=yes
-       fi
-       done
-       IFS="$lt_save_ifs"
-       ;;
-     esac
- else
-   enable_static=no
- fi
 +
 +
 +
-   enable_win32_dll=no
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++# Check whether --enable-libtool-lock was given.
++if test "${enable_libtool_lock+set}" = set; then :
++  enableval=$enable_libtool_lock;
++fi
 +
-             # Check whether --enable-shared was given.
- if test "${enable_shared+set}" = set; then :
-   enableval=$enable_shared; p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_shared=yes ;;
-     no) enable_shared=no ;;
-     *)
-       enable_shared=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_shared=yes
-       fi
-       done
-       IFS="$lt_save_ifs"
-       ;;
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 +
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then
++    case `/usr/bin/file conftest.$ac_objext` in
++      *ELF-32*)
++      HPUX_IA64_MODE="32"
++      ;;
++      *ELF-64*)
++      HPUX_IA64_MODE="64"
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++*-*-irix6*)
++  # Find out which ABI we are using.
++  echo '#line 6359 "configure"' > conftest.$ac_ext
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then
++    if test "$lt_cv_prog_gnu_ld" = yes; then
++      case `/usr/bin/file conftest.$ac_objext` in
++      *32-bit*)
++        LD="${LD-ld} -melf32bsmip"
++        ;;
++      *N32*)
++        LD="${LD-ld} -melf32bmipn32"
++        ;;
++      *64-bit*)
++        LD="${LD-ld} -melf64bmip"
++      ;;
++      esac
++    else
++      case `/usr/bin/file conftest.$ac_objext` in
++      *32-bit*)
++        LD="${LD-ld} -32"
++        ;;
++      *N32*)
++        LD="${LD-ld} -n32"
++        ;;
++      *64-bit*)
++        LD="${LD-ld} -64"
++        ;;
++      esac
++    fi
++  fi
++  rm -rf conftest*
++  ;;
 +
-   enable_shared=yes
- fi
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then
++    case `/usr/bin/file conftest.o` in
++      *32-bit*)
++      case $host in
++        x86_64-*kfreebsd*-gnu)
++          LD="${LD-ld} -m elf_i386_fbsd"
++          ;;
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_i386"
++          ;;
++        ppc64-*linux*|powerpc64-*linux*)
++          LD="${LD-ld} -m elf32ppclinux"
++          ;;
++        s390x-*linux*)
++          LD="${LD-ld} -m elf_s390"
++          ;;
++        sparc64-*linux*)
++          LD="${LD-ld} -m elf32_sparc"
++          ;;
++      esac
++      ;;
++      *64-bit*)
++      case $host in
++        x86_64-*kfreebsd*-gnu)
++          LD="${LD-ld} -m elf_x86_64_fbsd"
++          ;;
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        ppc*-*linux*|powerpc*-*linux*)
++          LD="${LD-ld} -m elf64ppc"
++          ;;
++        s390*-*linux*|s390*-*tpf*)
++          LD="${LD-ld} -m elf64_s390"
++          ;;
++        sparc*-*linux*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++      esac
++      ;;
 +    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
++$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
++if test "${lt_cv_cc_needs_belf+set}" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
- 
- 
- 
- 
- 
- 
- 
- 
- # Check whether --with-pic was given.
- if test "${with_pic+set}" = set; then :
-   withval=$with_pic; pic_mode="$withval"
++  ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
++     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
-   pic_mode=default
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  lt_cv_cc_needs_belf=yes
 +else
- 
- test -z "$pic_mode" && pic_mode=default
- 
- 
- 
- 
- 
- 
- 
-   # Check whether --enable-fast-install was given.
- if test "${enable_fast_install+set}" = set; then :
-   enableval=$enable_fast_install; p=${PACKAGE-default}
-     case $enableval in
-     yes) enable_fast_install=yes ;;
-     no) enable_fast_install=no ;;
-     *)
-       enable_fast_install=no
-       # Look at the argument we got.  We use all the common list separators.
-       lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-       for pkg in $enableval; do
-       IFS="$lt_save_ifs"
-       if test "X$pkg" = "X$p"; then
-         enable_fast_install=yes
++  lt_cv_cc_needs_belf=no
 +fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++     ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
-       done
-       IFS="$lt_save_ifs"
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
++$as_echo "$lt_cv_cc_needs_belf" >&6; }
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++sparc*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }; then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*) LD="${LD-ld} -m elf64_sparc" ;;
++      *)
++      if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++        LD="${LD-ld} -64"
 +      fi
- else
-   enable_fast_install=yes
- fi
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- # This can be used to rebuild libtool when needed
- LIBTOOL_DEPS="$ltmain"
- 
- # Always use our own libtool.
- LIBTOOL='$(SHELL) $(top_builddir)/libtool'
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- test -z "$LN_S" && LN_S="ln -s"
- 
- 
- 
- 
- 
- 
++      ;;
++      esac
 +      ;;
 +    esac
- if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
++  fi
++  rm -rf conftest*
++  ;;
++esac
 +
++need_locks="$enable_libtool_lock"
 +
 +
++  case $host_os in
++    rhapsody* | darwin*)
++    if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$DSYMUTIL"; then
++  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++DSYMUTIL=$ac_cv_prog_DSYMUTIL
++if test -n "$DSYMUTIL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
++$as_echo "$DSYMUTIL" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++fi
++if test -z "$ac_cv_prog_DSYMUTIL"; then
++  ac_ct_DSYMUTIL=$DSYMUTIL
++  # Extract the first word of "dsymutil", so it can be a program name with args.
++set dummy dsymutil; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_DSYMUTIL"; then
++  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
++if test -n "$ac_ct_DSYMUTIL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
++$as_echo "$ac_ct_DSYMUTIL" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
- $as_echo_n "checking for objdir... " >&6; }
- if test "${lt_cv_objdir+set}" = set; then :
++  if test "x$ac_ct_DSYMUTIL" = x; then
++    DSYMUTIL=":"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    DSYMUTIL=$ac_ct_DSYMUTIL
++  fi
++else
++  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
 +fi
 +
-   rm -f .libs 2>/dev/null
- mkdir .libs 2>/dev/null
- if test -d .libs; then
-   lt_cv_objdir=.libs
++    if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
++set dummy ${ac_tool_prefix}nmedit; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_NMEDIT+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   # MS-DOS does not allow filenames that begin with a dot.
-   lt_cv_objdir=_libs
++  if test -n "$NMEDIT"; then
++  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
 +else
- rmdir .libs 2>/dev/null
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
++
 +fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
- $as_echo "$lt_cv_objdir" >&6; }
- objdir=$lt_cv_objdir
- 
- 
- 
- 
- 
- cat >>confdefs.h <<_ACEOF
- #define LT_OBJDIR "$lt_cv_objdir/"
- _ACEOF
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- case $host_os in
- aix3*)
-   # AIX sometimes has problems with the GCC collect2 program.  For some
-   # reason, if we set the COLLECT_NAMES environment variable, the problems
-   # vanish in a puff of smoke.
-   if test "X${COLLECT_NAMES+set}" != Xset; then
-     COLLECT_NAMES=
-     export COLLECT_NAMES
-   fi
-   ;;
- esac
- 
- # Sed substitution that helps us do robust quoting.  It backslashifies
- # metacharacters that are still active within double-quoted strings.
- sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
- 
- # Same as above, but do not quote variable references.
- double_quote_subst='s/\(["`\\]\)/\\\1/g'
- 
- # Sed substitution to delay expansion of an escaped shell variable in a
- # double_quote_subst'ed string.
- delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
- 
- # Sed substitution to delay expansion of an escaped single quote.
- delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
- 
- # Sed substitution to avoid accidental globbing in evaled expressions
- no_glob_subst='s/\*/\\\*/g'
- 
- # Global variables:
- ofile=libtool
- can_build_shared=yes
- 
- # All known linkers require a `.a' archive for static linking (except MSVC,
- # which needs '.lib').
- libext=a
- 
- with_gnu_ld="$lt_cv_prog_gnu_ld"
- 
- old_CC="$CC"
- old_CFLAGS="$CFLAGS"
- 
- # Set sane defaults for various variables
- test -z "$CC" && CC=cc
- test -z "$LTCC" && LTCC=$CC
- test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
- test -z "$LD" && LD=ld
- test -z "$ac_objext" && ac_objext=o
- 
- for cc_temp in $compiler""; do
-   case $cc_temp in
-     compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-     distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-     \-*) ;;
-     *) break;;
-   esac
- done
- cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
- 
- 
- # Only perform the check for file, if the check method requires it
- test -z "$MAGIC_CMD" && MAGIC_CMD=file
- case $deplibs_check_method in
- file_magic*)
-   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
- $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
- if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   case $MAGIC_CMD in
- [\\/*] |  ?:[\\/]*)
-   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-   ;;
- *)
-   lt_save_MAGIC_CMD="$MAGIC_CMD"
-   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-   for ac_dir in $ac_dummy; do
-     IFS="$lt_save_ifs"
-     test -z "$ac_dir" && ac_dir=.
-     if test -f $ac_dir/${ac_tool_prefix}file; then
-       lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-       if test -n "$file_magic_test_file"; then
-       case $deplibs_check_method in
-       "file_magic "*)
-         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-           $EGREP "$file_magic_regex" > /dev/null; then
-           :
-         else
-           cat <<_LT_EOF 1>&2
- 
- *** Warning: the command libtool uses to detect shared libraries,
- *** $file_magic_cmd, produces output that libtool cannot recognize.
- *** The result is that libtool may fail to recognize shared libraries
- *** as such.  This will affect the creation of libtool libraries that
- *** depend on shared libraries, but programs linked with such libtool
- *** libraries will work regardless of this problem.  Nevertheless, you
- *** may want to report the problem to your system manager and/or to
- *** bug-libtool@gnu.org
- 
- _LT_EOF
-         fi ;;
-       esac
-       fi
-       break
-     fi
-   done
-   IFS="$lt_save_ifs"
-   MAGIC_CMD="$lt_save_MAGIC_CMD"
-   ;;
- esac
- fi
- 
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if test -n "$MAGIC_CMD"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
- $as_echo "$MAGIC_CMD" >&6; }
 +fi
- 
- 
- 
- if test -z "$lt_cv_path_MAGIC_CMD"; then
-   if test -n "$ac_tool_prefix"; then
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
- $as_echo_n "checking for file... " >&6; }
- if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
++NMEDIT=$ac_cv_prog_NMEDIT
++if test -n "$NMEDIT"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
++$as_echo "$NMEDIT" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
-   case $MAGIC_CMD in
- [\\/*] |  ?:[\\/]*)
-   lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-   ;;
- *)
-   lt_save_MAGIC_CMD="$MAGIC_CMD"
-   lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-   ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-   for ac_dir in $ac_dummy; do
-     IFS="$lt_save_ifs"
-     test -z "$ac_dir" && ac_dir=.
-     if test -f $ac_dir/file; then
-       lt_cv_path_MAGIC_CMD="$ac_dir/file"
-       if test -n "$file_magic_test_file"; then
-       case $deplibs_check_method in
-       "file_magic "*)
-         file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-         MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-         if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-           $EGREP "$file_magic_regex" > /dev/null; then
-           :
-         else
-           cat <<_LT_EOF 1>&2
- 
- *** Warning: the command libtool uses to detect shared libraries,
- *** $file_magic_cmd, produces output that libtool cannot recognize.
- *** The result is that libtool may fail to recognize shared libraries
- *** as such.  This will affect the creation of libtool libraries that
- *** depend on shared libraries, but programs linked with such libtool
- *** libraries will work regardless of this problem.  Nevertheless, you
- *** may want to report the problem to your system manager and/or to
- *** bug-libtool@gnu.org
- 
- _LT_EOF
-         fi ;;
-       esac
-       fi
-       break
-     fi
++fi
++if test -z "$ac_cv_prog_NMEDIT"; then
++  ac_ct_NMEDIT=$NMEDIT
++  # Extract the first word of "nmedit", so it can be a program name with args.
++set dummy nmedit; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
-   IFS="$lt_save_ifs"
-   MAGIC_CMD="$lt_save_MAGIC_CMD"
-   ;;
- esac
- fi
++  if test -n "$ac_ct_NMEDIT"; then
++  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_NMEDIT="nmedit"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
 +  done
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if test -n "$MAGIC_CMD"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
- $as_echo "$MAGIC_CMD" >&6; }
++IFS=$as_save_IFS
 +
- 
++fi
++fi
++ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
++if test -n "$ac_ct_NMEDIT"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
++$as_echo "$ac_ct_NMEDIT" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
-     MAGIC_CMD=:
++  if test "x$ac_ct_NMEDIT" = x; then
++    NMEDIT=":"
 +  else
-   fi
-   ;;
- esac
- 
- # Use C for the default configuration in the libtool script
- 
- lt_save_CC="$CC"
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- 
- 
- # Source file extension for C test sources.
- ac_ext=c
- 
- # Object file extension for compiled C test sources.
- objext=o
- objext=$objext
- 
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="int some_variable = 0;"
- 
- # Code to be used in simple link tests
- lt_simple_link_test_code='int main(){return(0);}'
- 
- 
- 
- 
- 
- 
- 
- # If no C compiler was specified, use CC.
- LTCC=${LTCC-"$CC"}
- 
- # If no C compiler flags were specified, use CFLAGS.
- LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    NMEDIT=$ac_ct_NMEDIT
 +  fi
++else
++  NMEDIT="$ac_cv_prog_NMEDIT"
 +fi
 +
- # Allow CC to be a program name with arguments.
- compiler=$CC
++    if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
++set dummy ${ac_tool_prefix}lipo; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_LIPO+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$LIPO"; then
++  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
- # Save the default compiler, since it gets overwritten when the other
- # tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
- compiler_DEFAULT=$CC
++fi
++fi
++LIPO=$ac_cv_prog_LIPO
++if test -n "$LIPO"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
++$as_echo "$LIPO" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
- # save warnings/boilerplate of simple test code
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" >conftest.$ac_ext
- eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
- _lt_compiler_boilerplate=`cat conftest.err`
- $RM conftest*
 +
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_link_test_code" >conftest.$ac_ext
- eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
- _lt_linker_boilerplate=`cat conftest.err`
- $RM -r conftest*
++fi
++if test -z "$ac_cv_prog_LIPO"; then
++  ac_ct_LIPO=$LIPO
++  # Extract the first word of "lipo", so it can be a program name with args.
++set dummy lipo; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_LIPO"; then
++  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_LIPO="lipo"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
- if test -n "$compiler"; then
++fi
++fi
++ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
++if test -n "$ac_ct_LIPO"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
++$as_echo "$ac_ct_LIPO" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
++  if test "x$ac_ct_LIPO" = x; then
++    LIPO=":"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    LIPO=$ac_ct_LIPO
++  fi
++else
++  LIPO="$ac_cv_prog_LIPO"
++fi
 +
- lt_prog_compiler_no_builtin_flag=
++    if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}otool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_OTOOL+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$OTOOL"; then
++  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
- if test "$GCC" = yes; then
-   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
++fi
++fi
++OTOOL=$ac_cv_prog_OTOOL
++if test -n "$OTOOL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
++$as_echo "$OTOOL" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
- $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
- if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
 +
-   lt_cv_prog_compiler_rtti_exceptions=no
-    ac_outfile=conftest.$ac_objext
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-    lt_compiler_flag="-fno-rtti -fno-exceptions"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    # The option is referenced via a variable to avoid confusing sed.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:7374: $lt_compile\"" >&5)
-    (eval "$lt_compile" 2>conftest.err)
-    ac_status=$?
-    cat conftest.err >&5
-    echo "$as_me:7378: \$? = $ac_status" >&5
-    if (exit $ac_status) && test -s "$ac_outfile"; then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings other than the usual output.
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-        lt_cv_prog_compiler_rtti_exceptions=yes
-      fi
-    fi
-    $RM conftest*
++fi
++if test -z "$ac_cv_prog_OTOOL"; then
++  ac_ct_OTOOL=$OTOOL
++  # Extract the first word of "otool", so it can be a program name with args.
++set dummy otool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
- $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
- 
- if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
++  if test -n "$ac_ct_OTOOL"; then
++  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_OTOOL="otool"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
 +fi
-     :
++fi
++ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
++if test -n "$ac_ct_OTOOL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
++$as_echo "$ac_ct_OTOOL" >&6; }
 +else
-   lt_prog_compiler_wl=
- lt_prog_compiler_pic=
- lt_prog_compiler_static=
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
- $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
- 
-   if test "$GCC" = yes; then
-     lt_prog_compiler_wl='-Wl,'
-     lt_prog_compiler_static='-static'
- 
-     case $host_os in
-       aix*)
-       # All AIX code is PIC.
-       if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       lt_prog_compiler_static='-Bstatic'
-       fi
-       ;;
- 
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             lt_prog_compiler_pic='-fPIC'
-         ;;
-       m68k)
-             # FIXME: we need at least 68020 code to build shared libraries, but
-             # adding the `-m68020' flag to GCC prevents building anything better,
-             # like `-m68040'.
-             lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-         ;;
-       esac
-       ;;
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
 +fi
 +
++  if test "x$ac_ct_OTOOL" = x; then
++    OTOOL=":"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    OTOOL=$ac_ct_OTOOL
++  fi
++else
++  OTOOL="$ac_cv_prog_OTOOL"
 +fi
 +
++    if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
++set dummy ${ac_tool_prefix}otool64; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_OTOOL64+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$OTOOL64"; then
++  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++OTOOL64=$ac_cv_prog_OTOOL64
++if test -n "$OTOOL64"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
++$as_echo "$OTOOL64" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++fi
++if test -z "$ac_cv_prog_OTOOL64"; then
++  ac_ct_OTOOL64=$OTOOL64
++  # Extract the first word of "otool64", so it can be a program name with args.
++set dummy otool64; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_OTOOL64"; then
++  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_OTOOL64="otool64"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
++if test -n "$ac_ct_OTOOL64"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
++$as_echo "$ac_ct_OTOOL64" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
-     beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-       # PIC is the default for these OSes.
-       ;;
++  if test "x$ac_ct_OTOOL64" = x; then
++    OTOOL64=":"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    OTOOL64=$ac_ct_OTOOL64
++  fi
++else
++  OTOOL64="$ac_cv_prog_OTOOL64"
++fi
 +
-     mingw* | cygwin* | pw32* | os2* | cegcc*)
-       # This hack is so that the source file can tell whether it is being
-       # built for inclusion in a dll (and should export symbols for example).
-       # Although the cygwin gcc ignores -fPIC, still need this for old-style
-       # (--disable-auto-import) libraries
-       lt_prog_compiler_pic='-DDLL_EXPORT'
-       ;;
 +
-     darwin* | rhapsody*)
-       # PIC is the default on this platform
-       # Common symbols not allowed in MH_DYLIB files
-       lt_prog_compiler_pic='-fno-common'
-       ;;
 +
-     hpux*)
-       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-       # sets the default TLS model and affects inlining.
-       case $host_cpu in
-       hppa*64*)
-       # +Z the default
-       ;;
-       *)
-       lt_prog_compiler_pic='-fPIC'
-       ;;
-       esac
-       ;;
 +
-     interix[3-9]*)
-       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-       # Instead, we relocate shared libraries at runtime.
-       ;;
 +
-     msdosdjgpp*)
-       # Just because we use GCC doesn't mean we suddenly get shared libraries
-       # on systems that don't support them.
-       lt_prog_compiler_can_build_shared=no
-       enable_shared=no
-       ;;
 +
-     *nto* | *qnx*)
-       # QNX uses GNU C++, but need to define -shared option too, otherwise
-       # it will coredump.
-       lt_prog_compiler_pic='-fPIC -shared'
-       ;;
 +
-     sysv4*MP*)
-       if test -d /usr/nec; then
-       lt_prog_compiler_pic=-Kconform_pic
-       fi
-       ;;
 +
-     *)
-       lt_prog_compiler_pic='-fPIC'
-       ;;
-     esac
-   else
-     # PORTME Check for flag to pass linker flags through the system compiler.
-     case $host_os in
-     aix*)
-       lt_prog_compiler_wl='-Wl,'
-       if test "$host_cpu" = ia64; then
-       # AIX 5 now supports IA64 processor
-       lt_prog_compiler_static='-Bstatic'
-       else
-       lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-       fi
-       ;;
 +
-     mingw* | cygwin* | pw32* | os2* | cegcc*)
-       # This hack is so that the source file can tell whether it is being
-       # built for inclusion in a dll (and should export symbols for example).
-       lt_prog_compiler_pic='-DDLL_EXPORT'
-       ;;
 +
-     hpux9* | hpux10* | hpux11*)
-       lt_prog_compiler_wl='-Wl,'
-       # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-       # not for PA HP-UX.
-       case $host_cpu in
-       hppa*64*|ia64*)
-       # +Z the default
-       ;;
-       *)
-       lt_prog_compiler_pic='+Z'
-       ;;
-       esac
-       # Is there a better lt_prog_compiler_static that works with the bundled CC?
-       lt_prog_compiler_static='${wl}-a ${wl}archive'
-       ;;
 +
-     irix5* | irix6* | nonstopux*)
-       lt_prog_compiler_wl='-Wl,'
-       # PIC (with -KPIC) is the default.
-       lt_prog_compiler_static='-non_shared'
-       ;;
 +
-     linux* | k*bsd*-gnu | kopensolaris*-gnu)
-       case $cc_basename in
-       # old Intel for x86_64 which still supported -KPIC.
-       ecc*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-KPIC'
-       lt_prog_compiler_static='-static'
-         ;;
-       # icc used to be incompatible with GCC.
-       # ICC 10 doesn't accept -KPIC any more.
-       icc* | ifort*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-fPIC'
-       lt_prog_compiler_static='-static'
-         ;;
-       # Lahey Fortran 8.1.
-       lf95*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='--shared'
-       lt_prog_compiler_static='--static'
-       ;;
-       pgcc* | pgf77* | pgf90* | pgf95*)
-         # Portland Group compilers (*not* the Pentium gcc compiler,
-       # which looks to be a dead project)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-fpic'
-       lt_prog_compiler_static='-Bstatic'
-         ;;
-       ccc*)
-         lt_prog_compiler_wl='-Wl,'
-         # All Alpha code is PIC.
-         lt_prog_compiler_static='-non_shared'
-         ;;
-       xl*)
-       # IBM XL C 8.0/Fortran 10.1 on PPC
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-qpic'
-       lt_prog_compiler_static='-qstaticlink'
-       ;;
-       *)
-       case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)
-         # Sun C 5.9
-         lt_prog_compiler_pic='-KPIC'
-         lt_prog_compiler_static='-Bstatic'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       *Sun\ F*)
-         # Sun Fortran 8.3 passes all unrecognized flags to the linker
-         lt_prog_compiler_pic='-KPIC'
-         lt_prog_compiler_static='-Bstatic'
-         lt_prog_compiler_wl=''
-         ;;
-       esac
-       ;;
-       esac
-       ;;
 +
-     newsos6)
-       lt_prog_compiler_pic='-KPIC'
-       lt_prog_compiler_static='-Bstatic'
-       ;;
 +
-     *nto* | *qnx*)
-       # QNX uses GNU C++, but need to define -shared option too, otherwise
-       # it will coredump.
-       lt_prog_compiler_pic='-fPIC -shared'
-       ;;
 +
-     osf3* | osf4* | osf5*)
-       lt_prog_compiler_wl='-Wl,'
-       # All OSF/1 code is PIC.
-       lt_prog_compiler_static='-non_shared'
-       ;;
 +
-     rdos*)
-       lt_prog_compiler_static='-non_shared'
-       ;;
 +
-     solaris*)
-       lt_prog_compiler_pic='-KPIC'
-       lt_prog_compiler_static='-Bstatic'
-       case $cc_basename in
-       f77* | f90* | f95*)
-       lt_prog_compiler_wl='-Qoption ld ';;
-       *)
-       lt_prog_compiler_wl='-Wl,';;
-       esac
-       ;;
 +
-     sunos4*)
-       lt_prog_compiler_wl='-Qoption ld '
-       lt_prog_compiler_pic='-PIC'
-       lt_prog_compiler_static='-Bstatic'
-       ;;
 +
-     sysv4 | sysv4.2uw2* | sysv4.3*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-KPIC'
-       lt_prog_compiler_static='-Bstatic'
-       ;;
 +
-     sysv4*MP*)
-       if test -d /usr/nec ;then
-       lt_prog_compiler_pic='-Kconform_pic'
-       lt_prog_compiler_static='-Bstatic'
-       fi
-       ;;
 +
-     sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_pic='-KPIC'
-       lt_prog_compiler_static='-Bstatic'
-       ;;
 +
-     unicos*)
-       lt_prog_compiler_wl='-Wl,'
-       lt_prog_compiler_can_build_shared=no
-       ;;
 +
-     uts4*)
-       lt_prog_compiler_pic='-pic'
-       lt_prog_compiler_static='-Bstatic'
-       ;;
 +
-     *)
-       lt_prog_compiler_can_build_shared=no
-       ;;
-     esac
-   fi
 +
- case $host_os in
-   # For platforms which do not support PIC, -DPIC is meaningless:
-   *djgpp*)
-     lt_prog_compiler_pic=
 +
-   *)
-     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
++
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
++$as_echo_n "checking for -single_module linker flag... " >&6; }
++if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_apple_cc_single_mod=no
++      if test -z "${LT_MULTI_MODULE}"; then
++      # By default we will add the -single_module flag. You can override
++      # by either setting the environment variable LT_MULTI_MODULE
++      # non-empty at configure time, or by adding -multi_module to the
++      # link flags.
++      rm -rf libconftest.dylib*
++      echo "int foo(void){return 1;}" > conftest.c
++      echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&5
++      $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++        -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++        _lt_result=$?
++      if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
++        lt_cv_apple_cc_single_mod=yes
++      else
++        cat conftest.err >&5
++      fi
++      rm -rf libconftest.dylib*
++      rm -f conftest.*
++      fi
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
++$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
++$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
++if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_ld_exported_symbols_list=no
++      save_LDFLAGS=$LDFLAGS
++      echo "_main" > conftest.sym
++      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  lt_cv_ld_exported_symbols_list=yes
++else
++  lt_cv_ld_exported_symbols_list=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++      LDFLAGS="$save_LDFLAGS"
++
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
++$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
++    case $host_os in
++    rhapsody* | darwin1.[012])
++      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++    darwin1.*)
++      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++    darwin*) # darwin 5.x on
++      # if running on 10.5 or later, the deployment target defaults
++      # to the OS version, if on x86, and 10.4, the deployment
++      # target defaults to 10.4. Don't you love it?
++      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++      10.0,*86*-darwin8*|10.0,*-darwin[91]*)
++        _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++      10.[012]*)
++        _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++      10.*)
++        _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++      esac
 +    ;;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
- $as_echo "$lt_prog_compiler_pic" >&6; }
++  esac
++    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++      _lt_dar_single_mod='$single_module'
++    fi
++    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++    else
++      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    fi
++    if test "$DSYMUTIL" != ":"; then
++      _lt_dsymutil='~$DSYMUTIL $lib || :'
++    else
++      _lt_dsymutil=
++    fi
 +    ;;
- #
- # Check to make sure the PIC flag actually works.
- #
- if test -n "$lt_prog_compiler_pic"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
- $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
- if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
-   $as_echo_n "(cached) " >&6
++  esac
 +
++for ac_header in dlfcn.h
++do :
++  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
++"
++if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
++  cat >>confdefs.h <<_ACEOF
++#define HAVE_DLFCN_H 1
++_ACEOF
 +
++fi
 +
++done
 +
 +
 +
-   lt_cv_prog_compiler_pic_works=no
-    ac_outfile=conftest.$ac_objext
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    # The option is referenced via a variable to avoid confusing sed.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:7713: $lt_compile\"" >&5)
-    (eval "$lt_compile" 2>conftest.err)
-    ac_status=$?
-    cat conftest.err >&5
-    echo "$as_me:7717: \$? = $ac_status" >&5
-    if (exit $ac_status) && test -s "$ac_outfile"; then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings other than the usual output.
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-        lt_cv_prog_compiler_pic_works=yes
-      fi
-    fi
-    $RM conftest*
- 
++# Set options
++enable_dlopen=yes
++# Check whether --enable-static was given.
++if test "${enable_static+set}" = set; then :
++  enableval=$enable_static; p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_static=yes ;;
++    no) enable_static=no ;;
++    *)
++     enable_static=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_static=yes
++      fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
- $as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
++  enable_static=no
 +fi
- if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-     case $lt_prog_compiler_pic in
-      "" | " "*) ;;
-      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-      esac
- else
-     lt_prog_compiler_pic=
-      lt_prog_compiler_can_build_shared=no
- fi
 +
- fi
 +
- #
- # Check to make sure the static flag actually works.
- #
- wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
- $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
- if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
 +
 +
 +
 +
 +
++enable_win32_dll=yes
 +
-   lt_cv_prog_compiler_static_works=no
-    save_LDFLAGS="$LDFLAGS"
-    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-    echo "$lt_simple_link_test_code" > conftest.$ac_ext
-    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-      # The linker can only warn and ignore the option if not recognized
-      # So say no if there are warnings
-      if test -s conftest.err; then
-        # Append any errors to the config.log.
-        cat conftest.err 1>&5
-        $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-        if diff conftest.exp conftest.er2 >/dev/null; then
-          lt_cv_prog_compiler_static_works=yes
-        fi
-      else
-        lt_cv_prog_compiler_static_works=yes
-      fi
-    fi
-    $RM -r conftest*
-    LDFLAGS="$save_LDFLAGS"
++case $host in
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
++set dummy ${ac_tool_prefix}as; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_AS+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
- $as_echo "$lt_cv_prog_compiler_static_works" >&6; }
- 
- if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-     :
++  if test -n "$AS"; then
++  ac_cv_prog_AS="$AS" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_AS="${ac_tool_prefix}as"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
 +fi
-     lt_prog_compiler_static=
++fi
++AS=$ac_cv_prog_AS
++if test -n "$AS"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
++$as_echo "$AS" >&6; }
 +else
- 
- 
- 
- 
- 
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
- $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
- if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
 +fi
 +
 +
-   lt_cv_prog_compiler_c_o=no
-    $RM -r conftest 2>/dev/null
-    mkdir conftest
-    cd conftest
-    mkdir out
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- 
-    lt_compiler_flag="-o out/conftest2.$ac_objext"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:7818: $lt_compile\"" >&5)
-    (eval "$lt_compile" 2>out/conftest.err)
-    ac_status=$?
-    cat out/conftest.err >&5
-    echo "$as_me:7822: \$? = $ac_status" >&5
-    if (exit $ac_status) && test -s out/conftest2.$ac_objext
-    then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-        lt_cv_prog_compiler_c_o=yes
-      fi
-    fi
-    chmod u+w . 2>&5
-    $RM conftest*
-    # SGI C++ compiler will create directory out/ii_files/ for
-    # template instantiation
-    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-    $RM out/* && rmdir out
-    cd ..
-    $RM -r conftest
-    $RM conftest*
++fi
++if test -z "$ac_cv_prog_AS"; then
++  ac_ct_AS=$AS
++  # Extract the first word of "as", so it can be a program name with args.
++set dummy as; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
- $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
- 
- 
- 
- 
++  if test -n "$ac_ct_AS"; then
++  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_AS="as"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
 +fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
- $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
- if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
++fi
++ac_ct_AS=$ac_cv_prog_ac_ct_AS
++if test -n "$ac_ct_AS"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
++$as_echo "$ac_ct_AS" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
++  if test "x$ac_ct_AS" = x; then
++    AS="false"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    AS=$ac_ct_AS
++  fi
++else
++  AS="$ac_cv_prog_AS"
++fi
 +
-   lt_cv_prog_compiler_c_o=no
-    $RM -r conftest 2>/dev/null
-    mkdir conftest
-    cd conftest
-    mkdir out
-    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- 
-    lt_compiler_flag="-o out/conftest2.$ac_objext"
-    # Insert the option either (1) after the last *FLAGS variable, or
-    # (2) before a word containing "conftest.", or (3) at the end.
-    # Note that $ac_compile itself does not contain backslashes and begins
-    # with a dollar sign (not a hyphen), so the echo should work correctly.
-    lt_compile=`echo "$ac_compile" | $SED \
-    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-    -e 's:$: $lt_compiler_flag:'`
-    (eval echo "\"\$as_me:7873: $lt_compile\"" >&5)
-    (eval "$lt_compile" 2>out/conftest.err)
-    ac_status=$?
-    cat out/conftest.err >&5
-    echo "$as_me:7877: \$? = $ac_status" >&5
-    if (exit $ac_status) && test -s out/conftest2.$ac_objext
-    then
-      # The compiler can only warn and ignore the option if not recognized
-      # So say no if there are warnings
-      $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-        lt_cv_prog_compiler_c_o=yes
-      fi
-    fi
-    chmod u+w . 2>&5
-    $RM conftest*
-    # SGI C++ compiler will create directory out/ii_files/ for
-    # template instantiation
-    test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-    $RM out/* && rmdir out
-    cd ..
-    $RM -r conftest
-    $RM conftest*
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
- $as_echo "$lt_cv_prog_compiler_c_o" >&6; }
++  if test -n "$DLLTOOL"; then
++  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
 +fi
- hard_links="nottested"
- if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-   # do not overwrite the value of need_locks provided by the user
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
- $as_echo_n "checking if we can lock with hard links... " >&6; }
-   hard_links=yes
-   $RM conftest*
-   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-   touch conftest.a
-   ln conftest.a conftest.b 2>&5 || hard_links=no
-   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
- $as_echo "$hard_links" >&6; }
-   if test "$hard_links" = no; then
-     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
- $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-     need_locks=warn
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
++$as_echo "$DLLTOOL" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++  ac_ct_DLLTOOL=$DLLTOOL
++  # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_DLLTOOL"; then
++  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
++$as_echo "$ac_ct_DLLTOOL" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
-   need_locks=no
++  if test "x$ac_ct_DLLTOOL" = x; then
++    DLLTOOL="false"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    DLLTOOL=$ac_ct_DLLTOOL
 +  fi
 +else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
- $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
- 
-   runpath_var=
-   allow_undefined_flag=
-   always_export_symbols=no
-   archive_cmds=
-   archive_expsym_cmds=
-   compiler_needs_object=no
-   enable_shared_with_static_runtimes=no
-   export_dynamic_flag_spec=
-   export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-   hardcode_automatic=no
-   hardcode_direct=no
-   hardcode_direct_absolute=no
-   hardcode_libdir_flag_spec=
-   hardcode_libdir_flag_spec_ld=
-   hardcode_libdir_separator=
-   hardcode_minus_L=no
-   hardcode_shlibpath_var=unsupported
-   inherit_rpath=no
-   link_all_deplibs=unknown
-   module_cmds=
-   module_expsym_cmds=
-   old_archive_from_new_cmds=
-   old_archive_from_expsyms_cmds=
-   thread_safe_flag_spec=
-   whole_archive_flag_spec=
-   # include_expsyms should be a list of space-separated symbols to be *always*
-   # included in the symbol list
-   include_expsyms=
-   # exclude_expsyms can be an extended regexp of symbols to exclude
-   # it will be wrapped by ` (' and `)$', so one must not match beginning or
-   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-   # as well as any symbol that contains `d'.
-   exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-   # platforms (ab)use it in PIC code, but their linkers get confused if
-   # the symbol is explicitly referenced.  Since portable code cannot
-   # rely on this symbol name, it's probably fine to never include it in
-   # preloaded symbol tables.
-   # Exclude shared library initialization/finalization symbols.
-   extract_expsyms_cmds=
- 
-   case $host_os in
-   cygwin* | mingw* | pw32* | cegcc*)
-     # FIXME: the MSVC++ port hasn't been tested in a loooong time
-     # When not using gcc, we currently assume that we are using
-     # Microsoft Visual C++.
-     if test "$GCC" != yes; then
-       with_gnu_ld=no
-     fi
-     ;;
-   interix*)
-     # we just hope/assume this is gcc and not c89 (= MSVC++)
-     with_gnu_ld=yes
-     ;;
-   openbsd*)
-     with_gnu_ld=no
-     ;;
-   linux* | k*bsd*-gnu)
-     link_all_deplibs=no
-     ;;
-   esac
- 
-   ld_shlibs=yes
-   if test "$with_gnu_ld" = yes; then
-     # If archive_cmds runs LD, not CC, wlarc should be empty
-     wlarc='${wl}'
- 
-     # Set some defaults for GNU ld with shared library support. These
-     # are reset later if shared libraries are not supported. Putting them
-     # here allows them to be overridden if necessary.
-     runpath_var=LD_RUN_PATH
-     hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-     export_dynamic_flag_spec='${wl}--export-dynamic'
-     # ancient GNU ld didn't support --whole-archive et. al.
-     if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-       whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-     else
-       whole_archive_flag_spec=
-     fi
-     supports_anon_versioning=no
-     case `$LD -v 2>&1` in
-       *GNU\ gold*) supports_anon_versioning=yes ;;
-       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-       *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-       *\ 2.11.*) ;; # other 2.11 versions
-       *) supports_anon_versioning=yes ;;
-     esac
- 
-     # See if GNU ld supports shared libraries.
-     case $host_os in
-     aix[3-9]*)
-       # On AIX/PPC, the GNU linker is very broken
-       if test "$host_cpu" != ia64; then
-       ld_shlibs=no
-       cat <<_LT_EOF 1>&2
- 
- *** Warning: the GNU linker, at least up to release 2.9.1, is reported
- *** to be unable to reliably create shared libraries on AIX.
- *** Therefore, libtool is disabling shared libraries support.  If you
- *** really care for shared libraries, you may want to modify your PATH
- *** so that a non-GNU linker is found, and then restart.
++  DLLTOOL="$ac_cv_prog_DLLTOOL"
 +fi
 +
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
++set dummy ${ac_tool_prefix}objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$OBJDUMP"; then
++  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++OBJDUMP=$ac_cv_prog_OBJDUMP
++if test -n "$OBJDUMP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
++$as_echo "$OBJDUMP" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++fi
++if test -z "$ac_cv_prog_OBJDUMP"; then
++  ac_ct_OBJDUMP=$OBJDUMP
++  # Extract the first word of "objdump", so it can be a program name with args.
++set dummy objdump; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  if test -n "$ac_ct_OBJDUMP"; then
++  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_prog_ac_ct_OBJDUMP="objdump"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
 +
++fi
++fi
++ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
++if test -n "$ac_ct_OBJDUMP"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
++$as_echo "$ac_ct_OBJDUMP" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
- _LT_EOF
-       fi
-       ;;
++  if test "x$ac_ct_OBJDUMP" = x; then
++    OBJDUMP="false"
++  else
++    case $cross_compiling:$ac_tool_warned in
++yes:)
++{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
++$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
++ac_tool_warned=yes ;;
++esac
++    OBJDUMP=$ac_ct_OBJDUMP
++  fi
++else
++  OBJDUMP="$ac_cv_prog_OBJDUMP"
++fi
 +
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-             archive_expsym_cmds=''
-         ;;
-       m68k)
-             archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-             hardcode_libdir_flag_spec='-L$libdir'
-             hardcode_minus_L=yes
-         ;;
-       esac
-       ;;
++  ;;
++esac
 +
-     beos*)
-       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       allow_undefined_flag=unsupported
-       # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-       # support --undefined.  This deserves some investigation.  FIXME
-       archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       else
-       ld_shlibs=no
-       fi
-       ;;
++test -z "$AS" && AS=as
 +
-     cygwin* | mingw* | pw32* | cegcc*)
-       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-       # as there is no search path for DLLs.
-       hardcode_libdir_flag_spec='-L$libdir'
-       allow_undefined_flag=unsupported
-       always_export_symbols=no
-       enable_shared_with_static_runtimes=yes
-       export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 +
-       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-       # If the export-symbols file already is a .def file (1st line
-       # is EXPORTS), use it as is; otherwise, prepend...
-       archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-         cp $export_symbols $output_objdir/$soname.def;
-       else
-         echo EXPORTS > $output_objdir/$soname.def;
-         cat $export_symbols >> $output_objdir/$soname.def;
-       fi~
-       $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-       else
-       ld_shlibs=no
-       fi
-       ;;
 +
-     interix[3-9]*)
-       hardcode_direct=no
-       hardcode_shlibpath_var=no
-       hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-       export_dynamic_flag_spec='${wl}-E'
-       # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-       # Instead, shared libraries are loaded at an image base (0x10000000 by
-       # default) and relocated if they conflict, which is a slow very memory
-       # consuming and fragmenting process.  To avoid this, we pick a random,
-       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-       archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-       ;;
 +
-     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-       tmp_diet=no
-       if test "$host_os" = linux-dietlibc; then
-       case $cc_basename in
-         diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
-       esac
-       fi
-       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-        && test "$tmp_diet" = no
-       then
-       tmp_addflag=
-       tmp_sharedflag='-shared'
-       case $cc_basename,$host_cpu in
-         pgcc*)                                # Portland Group C compiler
-         whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         tmp_addflag=' $pic_flag'
-         ;;
-       pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
-         whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         tmp_addflag=' $pic_flag -Mnomain' ;;
-       ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
-         tmp_addflag=' -i_dynamic' ;;
-       efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
-         tmp_addflag=' -i_dynamic -nofor_main' ;;
-       ifc* | ifort*)                  # Intel Fortran compiler
-         tmp_addflag=' -nofor_main' ;;
-       lf95*)                          # Lahey Fortran 8.1
-         whole_archive_flag_spec=
-         tmp_sharedflag='--shared' ;;
-       xl[cC]*)                        # IBM XL C 8.0 on PPC (deal with xlf below)
-         tmp_sharedflag='-qmkshrobj'
-         tmp_addflag= ;;
-       esac
-       case `$CC -V 2>&1 | sed 5q` in
-       *Sun\ C*)                       # Sun C 5.9
-         whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-         compiler_needs_object=yes
-         tmp_sharedflag='-G' ;;
-       *Sun\ F*)                       # Sun Fortran 8.3
-         tmp_sharedflag='-G' ;;
-       esac
-       archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +
-         if test "x$supports_anon_versioning" = xyes; then
-           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-           cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-           echo "local: *; };" >> $output_objdir/$libname.ver~
-           $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-         fi
++test -z "$DLLTOOL" && DLLTOOL=dlltool
 +
-       case $cc_basename in
-       xlf*)
-         # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-         whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-         hardcode_libdir_flag_spec=
-         hardcode_libdir_flag_spec_ld='-rpath $libdir'
-         archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-         if test "x$supports_anon_versioning" = xyes; then
-           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-             cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-             echo "local: *; };" >> $output_objdir/$libname.ver~
-             $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-         fi
-         ;;
-       esac
-       else
-         ld_shlibs=no
-       fi
-       ;;
 +
-     netbsd* | netbsdelf*-gnu)
-       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-       archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-       wlarc=
-       else
-       archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       fi
-       ;;
 +
-     solaris*)
-       if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-       ld_shlibs=no
-       cat <<_LT_EOF 1>&2
 +
- *** Warning: The releases 2.8.* of the GNU linker cannot reliably
- *** create shared libraries on Solaris systems.  Therefore, libtool
- *** is disabling shared libraries support.  We urge you to upgrade GNU
- *** binutils to release 2.9.1 or newer.  Another option is to modify
- *** your PATH or compiler configuration so that the native linker is
- *** used, and then restart.
 +
- _LT_EOF
-       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       else
-       ld_shlibs=no
-       fi
-       ;;
++test -z "$OBJDUMP" && OBJDUMP=objdump
++
++
++
 +
-     sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-       case `$LD -v 2>&1` in
-         *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-       ld_shlibs=no
-       cat <<_LT_EOF 1>&2
 +
- *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
- *** reliably create shared libraries on SCO systems.  Therefore, libtool
- *** is disabling shared libraries support.  We urge you to upgrade GNU
- *** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
- *** your PATH or compiler configuration so that the native linker is
- *** used, and then restart.
 +
- _LT_EOF
-       ;;
-       *)
-         # For security reasons, it is highly recommended that you always
-         # use absolute paths for naming shared libraries, and exclude the
-         # DT_RUNPATH tag from executables and libraries.  But doing so
-         # requires that you compile everything twice, which is a pain.
-         if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-           hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-           archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-           archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-         else
-           ld_shlibs=no
-         fi
-       ;;
-       esac
-       ;;
 +
-     sunos4*)
-       archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-       wlarc=
-       hardcode_direct=yes
-       hardcode_shlibpath_var=no
-       ;;
 +
-       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-       archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-       archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-       else
-       ld_shlibs=no
-       fi
 +
++            # Check whether --enable-shared was given.
++if test "${enable_shared+set}" = set; then :
++  enableval=$enable_shared; p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_shared=yes ;;
++    no) enable_shared=no ;;
 +    *)
-     if test "$ld_shlibs" = no; then
-       runpath_var=
-       hardcode_libdir_flag_spec=
-       export_dynamic_flag_spec=
-       whole_archive_flag_spec=
-     fi
-   else
-     # PORTME fill in a description of your system's linker (not GNU ld)
-     case $host_os in
-     aix3*)
-       allow_undefined_flag=unsupported
-       always_export_symbols=yes
-       archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-       # Note: this linker hardcodes the directories in LIBPATH if there
-       # are no directories specified by -L.
-       hardcode_minus_L=yes
-       if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-       # Neither direct hardcoding nor static linking is supported with a
-       # broken collect2.
-       hardcode_direct=unsupported
-       fi
-       ;;
++      enable_shared=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_shared=yes
++      fi
++      done
++      IFS="$lt_save_ifs"
 +      ;;
 +    esac
++else
++  enable_shared=yes
++fi
 +
-     aix[4-9]*)
-       if test "$host_cpu" = ia64; then
-       # On IA64, the linker does run time linking by default, so we don't
-       # have to do anything special.
-       aix_use_runtimelinking=no
-       exp_sym_flag='-Bexport'
-       no_entry_flag=""
-       else
-       # If we're using GNU nm, then we don't want the "-C" option.
-       # -C means demangle to AIX nm, but means don't demangle with GNU nm
-       if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-         export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-       else
-         export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-       fi
-       aix_use_runtimelinking=no
 +
-       # Test if we are trying to use run time linking or normal
-       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-       # need to do runtime linking.
-       case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-         for ld_flag in $LDFLAGS; do
-         if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-           aix_use_runtimelinking=yes
-           break
-         fi
-         done
-         ;;
-       esac
 +
-       exp_sym_flag='-bexport'
-       no_entry_flag='-bnoentry'
-       fi
 +
-       # When large executables or shared objects are built, AIX ld can
-       # have problems creating the table of contents.  If linking a library
-       # or program results in "error TOC overflow" add -mminimal-toc to
-       # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-       # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 +
-       archive_cmds=''
-       hardcode_direct=yes
-       hardcode_direct_absolute=yes
-       hardcode_libdir_separator=':'
-       link_all_deplibs=yes
-       file_list_spec='${wl}-f,'
 +
-       if test "$GCC" = yes; then
-       case $host_os in aix4.[012]|aix4.[012].*)
-       # We only want to do this on AIX 4.2 and lower, the check
-       # below for broken collect2 doesn't work under 4.3+
-         collect2name=`${CC} -print-prog-name=collect2`
-         if test -f "$collect2name" &&
-          strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-         then
-         # We have reworked collect2
-         :
-         else
-         # We have old collect2
-         hardcode_direct=unsupported
-         # It fails to find uninstalled libraries when the uninstalled
-         # path is not listed in the libpath.  Setting hardcode_minus_L
-         # to unsupported forces relinking
-         hardcode_minus_L=yes
-         hardcode_libdir_flag_spec='-L$libdir'
-         hardcode_libdir_separator=
-         fi
-         ;;
-       esac
-       shared_flag='-shared'
-       if test "$aix_use_runtimelinking" = yes; then
-         shared_flag="$shared_flag "'${wl}-G'
-       fi
-       link_all_deplibs=no
-       else
-       # not using gcc
-       if test "$host_cpu" = ia64; then
-       # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-       # chokes on -Wl,-G. The following line is correct:
-         shared_flag='-G'
-       else
-         if test "$aix_use_runtimelinking" = yes; then
-           shared_flag='${wl}-G'
-         else
-           shared_flag='${wl}-bM:SRE'
-         fi
-       fi
-       fi
 +
-       export_dynamic_flag_spec='${wl}-bexpall'
-       # It seems that -bexpall does not export symbols beginning with
-       # underscore (_), so it is better to generate a list of symbols to export.
-       always_export_symbols=yes
-       if test "$aix_use_runtimelinking" = yes; then
-       # Warning - without using the other runtime loading flags (-brtl),
-       # -berok will link without error, but may produce a broken library.
-       allow_undefined_flag='-berok'
-         # Determine the default libpath from the value encoded in an
-         # empty executable.
-         cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
 +
- lt_aix_libpath_sed='
-     /Import File Strings/,/^$/ {
-       /^0/ {
-           s/^0  *\(.*\)$/\1/
-           p
-       }
-     }'
- aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$aix_libpath"; then
-   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi
 +
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++# Check whether --with-pic was given.
++if test "${with_pic+set}" = set; then :
++  withval=$with_pic; pic_mode="$withval"
++else
++  pic_mode=default
 +fi
-         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-         archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-       if test "$host_cpu" = ia64; then
-         hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-         allow_undefined_flag="-z nodefs"
-         archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-       else
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
++test -z "$pic_mode" && pic_mode=default
 +
- lt_aix_libpath_sed='
-     /Import File Strings/,/^$/ {
-       /^0/ {
-           s/^0  *\(.*\)$/\1/
-           p
-       }
-     }'
- aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$aix_libpath"; then
-   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 +
-        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-         # Warning - without using the other run time loading flags,
-         # -berok will link without error, but may produce a broken library.
-         no_undefined_flag=' ${wl}-bernotok'
-         allow_undefined_flag=' ${wl}-berok'
-         # Exported symbols can be pulled into shared objects from archives
-         whole_archive_flag_spec='$convenience'
-         archive_cmds_need_lc=yes
-         # This is similar to how AIX traditionally builds its shared libraries.
-         archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 +
-       fi
++
++
++
++
++  # Check whether --enable-fast-install was given.
++if test "${enable_fast_install+set}" = set; then :
++  enableval=$enable_fast_install; p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_fast_install=yes ;;
++    no) enable_fast_install=no ;;
++    *)
++      enable_fast_install=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_fast_install=yes
 +      fi
-     amigaos*)
-       case $host_cpu in
-       powerpc)
-             # see comment about AmigaOS4 .so support
-             archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-             archive_expsym_cmds=''
-         ;;
-       m68k)
-             archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-             hardcode_libdir_flag_spec='-L$libdir'
-             hardcode_minus_L=yes
-         ;;
-       esac
-       ;;
++      done
++      IFS="$lt_save_ifs"
 +      ;;
++    esac
++else
++  enable_fast_install=yes
++fi
 +
-     bsdi[45]*)
-       export_dynamic_flag_spec=-rdynamic
-       ;;
 +
-     cygwin* | mingw* | pw32* | cegcc*)
-       # When not using gcc, we currently assume that we are using
-       # Microsoft Visual C++.
-       # hardcode_libdir_flag_spec is actually meaningless, as there is
-       # no search path for DLLs.
-       hardcode_libdir_flag_spec=' '
-       allow_undefined_flag=unsupported
-       # Tell ltmain to make .lib files, not .a files.
-       libext=lib
-       # Tell ltmain to make .dll files, not .so files.
-       shrext_cmds=".dll"
-       # FIXME: Setting linknames here is a bad hack.
-       archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-       # The linker will automatically build a .lib file if we build a DLL.
-       old_archive_from_new_cmds='true'
-       # FIXME: Should let the user specify the lib program.
-       old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-       fix_srcfile_path='`cygpath -w "$srcfile"`'
-       enable_shared_with_static_runtimes=yes
-       ;;
 +
-     darwin* | rhapsody*)
 +
-   archive_cmds_need_lc=no
-   hardcode_direct=no
-   hardcode_automatic=yes
-   hardcode_shlibpath_var=unsupported
-   whole_archive_flag_spec=''
-   link_all_deplibs=yes
-   allow_undefined_flag="$_lt_dar_allow_undefined"
-   case $cc_basename in
-      ifort*) _lt_dar_can_shared=yes ;;
-      *) _lt_dar_can_shared=$GCC ;;
-   esac
-   if test "$_lt_dar_can_shared" = "yes"; then
-     output_verbose_link_cmd=echo
-     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-     archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-     module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
 +
 +
-   else
-   ld_shlibs=no
-   fi
 +
-       ;;
 +
-     dgux*)
-       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_libdir_flag_spec='-L$libdir'
-       hardcode_shlibpath_var=no
-       ;;
 +
-     freebsd1*)
-       ld_shlibs=no
-       ;;
 +
-     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-     # support.  Future versions do this automatically, but an explicit c++rt0.o
-     # does not break anything, and helps significantly (at the cost of a little
-     # extra space).
-     freebsd2.2*)
-       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-       hardcode_libdir_flag_spec='-R$libdir'
-       hardcode_direct=yes
-       hardcode_shlibpath_var=no
-       ;;
 +
-     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-     freebsd2*)
-       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_direct=yes
-       hardcode_minus_L=yes
-       hardcode_shlibpath_var=no
-       ;;
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
 +
-     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-     freebsd* | dragonfly*)
-       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-       hardcode_libdir_flag_spec='-R$libdir'
-       hardcode_direct=yes
-       hardcode_shlibpath_var=no
-       ;;
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 +
-     hpux9*)
-       if test "$GCC" = yes; then
-       archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-       else
-       archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-       fi
-       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-       hardcode_libdir_separator=:
-       hardcode_direct=yes
 +
-       # hardcode_minus_L: Not really in the search PATH,
-       # but as the default location of the library.
-       hardcode_minus_L=yes
-       export_dynamic_flag_spec='${wl}-E'
-       ;;
 +
-     hpux10*)
-       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-       archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-       fi
-       if test "$with_gnu_ld" = no; then
-       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-       hardcode_libdir_flag_spec_ld='+b $libdir'
-       hardcode_libdir_separator=:
-       hardcode_direct=yes
-       hardcode_direct_absolute=yes
-       export_dynamic_flag_spec='${wl}-E'
-       # hardcode_minus_L: Not really in the search PATH,
-       # but as the default location of the library.
-       hardcode_minus_L=yes
-       fi
-       ;;
 +
-     hpux11*)
-       if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-       case $host_cpu in
-       hppa*64*)
-         archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       ia64*)
-         archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       *)
-         archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       esac
-       else
-       case $host_cpu in
-       hppa*64*)
-         archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       ia64*)
-         archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       *)
-         archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-         ;;
-       esac
-       fi
-       if test "$with_gnu_ld" = no; then
-       hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-       hardcode_libdir_separator=:
 +
-       case $host_cpu in
-       hppa*64*|ia64*)
-         hardcode_direct=no
-         hardcode_shlibpath_var=no
-         ;;
-       *)
-         hardcode_direct=yes
-         hardcode_direct_absolute=yes
-         export_dynamic_flag_spec='${wl}-E'
 +
-         # hardcode_minus_L: Not really in the search PATH,
-         # but as the default location of the library.
-         hardcode_minus_L=yes
-         ;;
-       esac
-       fi
-       ;;
 +
-     irix5* | irix6* | nonstopux*)
-       if test "$GCC" = yes; then
-       archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       # Try to use the -exported_symbol ld option, if it does not
-       # work, assume that -exports_file does not work either and
-       # implicitly export all symbols.
-         save_LDFLAGS="$LDFLAGS"
-         LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-         cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- int foo(void) {}
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 +
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
-         LDFLAGS="$save_LDFLAGS"
-       else
-       archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-       fi
-       archive_cmds_need_lc='no'
-       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-       hardcode_libdir_separator=:
-       inherit_rpath=yes
-       link_all_deplibs=yes
-       ;;
 +
-     netbsd* | netbsdelf*-gnu)
-       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-       else
-       archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-       fi
-       hardcode_libdir_flag_spec='-R$libdir'
-       hardcode_direct=yes
-       hardcode_shlibpath_var=no
-       ;;
 +
-     newsos6)
-       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_direct=yes
-       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-       hardcode_libdir_separator=:
-       hardcode_shlibpath_var=no
-       ;;
 +
-     *nto* | *qnx*)
-       ;;
 +
-     openbsd*)
-       if test -f /usr/libexec/ld.so; then
-       hardcode_direct=yes
-       hardcode_shlibpath_var=no
-       hardcode_direct_absolute=yes
-       if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-         archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-         archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-         hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-         export_dynamic_flag_spec='${wl}-E'
-       else
-         case $host_os in
-          openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-            archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-            hardcode_libdir_flag_spec='-R$libdir'
-            ;;
-          *)
-            archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-            hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-            ;;
-         esac
-       fi
-       else
-       ld_shlibs=no
-       fi
-       ;;
 +
-     os2*)
-       hardcode_libdir_flag_spec='-L$libdir'
-       hardcode_minus_L=yes
-       allow_undefined_flag=unsupported
-       archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-       old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-       ;;
 +
-     osf3*)
-       if test "$GCC" = yes; then
-       allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-       archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       else
-       allow_undefined_flag=' -expect_unresolved \*'
-       archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       fi
-       archive_cmds_need_lc='no'
-       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-       hardcode_libdir_separator=:
-       ;;
 +
-     osf4* | osf5*)    # as osf3* with the addition of -msym flag
-       if test "$GCC" = yes; then
-       allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-       archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-       else
-       allow_undefined_flag=' -expect_unresolved \*'
-       archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-       archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-       $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 +
-       # Both c and cxx compiler support -rpath directly
-       hardcode_libdir_flag_spec='-rpath $libdir'
-       fi
-       archive_cmds_need_lc='no'
-       hardcode_libdir_separator=:
-       ;;
 +
-     solaris*)
-       no_undefined_flag=' -z defs'
-       if test "$GCC" = yes; then
-       wlarc='${wl}'
-       archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-       archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-       else
-       case `$CC -V 2>&1` in
-       *"Compilers 5.0"*)
-         wlarc=''
-         archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-         ;;
-       *)
-         wlarc='${wl}'
-         archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-         archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-         $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-         ;;
-       esac
-       fi
-       hardcode_libdir_flag_spec='-R$libdir'
-       hardcode_shlibpath_var=no
-       case $host_os in
-       solaris2.[0-5] | solaris2.[0-5].*) ;;
-       *)
-       # The compiler driver will combine and reorder linker options,
-       # but understands `-z linker_flag'.  GCC discards it without `$wl',
-       # but is careful enough not to reorder.
-       # Supported since Solaris 2.6 (maybe 2.5.1?)
-       if test "$GCC" = yes; then
-         whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-       else
-         whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-       fi
-       ;;
-       esac
-       link_all_deplibs=yes
-       ;;
- 
-     sunos4*)
-       if test "x$host_vendor" = xsequent; then
-       # Use $CC to link under sequent, because it throws in some extra .o
-       # files that make .init and .fini sections work.
-       archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-       fi
-       hardcode_libdir_flag_spec='-L$libdir'
-       hardcode_direct=yes
-       hardcode_minus_L=yes
-       hardcode_shlibpath_var=no
-       ;;
- 
-     sysv4)
-       case $host_vendor in
-       sni)
-         archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         hardcode_direct=yes # is this really true???
-       ;;
-       siemens)
-         ## LD is ld it makes a PLAMLIB
-         ## CC just makes a GrossModule.
-         archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-         reload_cmds='$CC -r -o $output$reload_objs'
-         hardcode_direct=no
-         ;;
-       motorola)
-         archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-         hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-       ;;
-       esac
-       runpath_var='LD_RUN_PATH'
-       hardcode_shlibpath_var=no
-       ;;
- 
-     sysv4.3*)
-       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_shlibpath_var=no
-       export_dynamic_flag_spec='-Bexport'
-       ;;
- 
-     sysv4*MP*)
-       if test -d /usr/nec; then
-       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_shlibpath_var=no
-       runpath_var=LD_RUN_PATH
-       hardcode_runpath_var=yes
-       ld_shlibs=yes
-       fi
-       ;;
- 
-     sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-       no_undefined_flag='${wl}-z,text'
-       archive_cmds_need_lc=no
-       hardcode_shlibpath_var=no
-       runpath_var='LD_RUN_PATH'
- 
-       if test "$GCC" = yes; then
-       archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       fi
-       ;;
- 
-     sysv5* | sco3.2v5* | sco5v6*)
-       # Note: We can NOT use -z defs as we might desire, because we do not
-       # link with -lc, and that would cause any symbols used from libc to
-       # always be unresolved, which means just about no library would
-       # ever link correctly.  If we're not using GNU ld we use -z text
-       # though, which does catch some bad symbols but isn't as heavy-handed
-       # as -z defs.
-       no_undefined_flag='${wl}-z,text'
-       allow_undefined_flag='${wl}-z,nodefs'
-       archive_cmds_need_lc=no
-       hardcode_shlibpath_var=no
-       hardcode_libdir_flag_spec='${wl}-R,$libdir'
-       hardcode_libdir_separator=':'
-       link_all_deplibs=yes
-       export_dynamic_flag_spec='${wl}-Bexport'
-       runpath_var='LD_RUN_PATH'
- 
-       if test "$GCC" = yes; then
-       archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       else
-       archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-       fi
-       ;;
- 
-     uts4*)
-       archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-       hardcode_libdir_flag_spec='-L$libdir'
-       hardcode_shlibpath_var=no
-       ;;
- 
-     *)
-       ld_shlibs=no
-       ;;
-     esac
- 
-     if test x$host_vendor = xsni; then
-       case $host in
-       sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-       export_dynamic_flag_spec='${wl}-Blargedynsym'
-       ;;
-       esac
-     fi
-   fi
- 
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
- $as_echo "$ld_shlibs" >&6; }
- test "$ld_shlibs" = no && can_build_shared=no
- 
- with_gnu_ld=$with_gnu_ld
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- 
- #
- # Do we need to explicitly link libc?
- #
- case "x$archive_cmds_need_lc" in
- x|xyes)
-   # Assume -lc should be added
-   archive_cmds_need_lc=yes
- 
-   if test "$enable_shared" = yes && test "$GCC" = yes; then
-     case $archive_cmds in
-     *'~'*)
-       # FIXME: we may have to deal with multi-command sequences.
-       ;;
-     '$CC '*)
-       # Test whether the compiler implicitly links with -lc since on some
-       # systems, -lgcc has to come before -lc. If gcc already passes -lc
-       # to ld, don't add -lc before -lgcc.
-       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
- $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-       $RM conftest*
-       echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- 
-       if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
-   (eval $ac_compile) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } 2>conftest.err; then
-         soname=conftest
-         lib=conftest
-         libobjs=conftest.$ac_objext
-         deplibs=
-         wl=$lt_prog_compiler_wl
-       pic_flag=$lt_prog_compiler_pic
-         compiler_flags=-v
-         linker_flags=-v
-         verstring=
-         output_objdir=.
-         libname=conftest
-         lt_save_allow_undefined_flag=$allow_undefined_flag
-         allow_undefined_flag=
-         if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
-   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }
-         then
-         archive_cmds_need_lc=no
-         else
-         archive_cmds_need_lc=yes
-         fi
-         allow_undefined_flag=$lt_save_allow_undefined_flag
-       else
-         cat conftest.err 1>&5
-       fi
-       $RM conftest*
-       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
- $as_echo "$archive_cmds_need_lc" >&6; }
-       ;;
-     esac
-   fi
-   ;;
- esac
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
- $as_echo_n "checking dynamic linker characteristics... " >&6; }
 +
 +
 +
 +
 +
 +
 +
++test -z "$LN_S" && LN_S="ln -s"
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++if test -n "${ZSH_VERSION+set}" ; then
++   setopt NO_GLOB_SUBST
++fi
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
++$as_echo_n "checking for objdir... " >&6; }
++if test "${lt_cv_objdir+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
++$as_echo "$lt_cv_objdir" >&6; }
++objdir=$lt_cv_objdir
 +
 +
 +
 +
 +
++cat >>confdefs.h <<_ACEOF
++#define LT_OBJDIR "$lt_cv_objdir/"
++_ACEOF
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
 +
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 +
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\(["`\\]\)/\\\1/g'
 +
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 +
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 +
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
 +
++# Global variables:
++ofile=libtool
++can_build_shared=yes
 +
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
 +
++with_gnu_ld="$lt_cv_prog_gnu_ld"
 +
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
 +
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
 +
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 +
 +
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
++$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  case $MAGIC_CMD in
++[\\/*] |  ?:[\\/]*)
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/${ac_tool_prefix}file; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
++      if test -n "$file_magic_test_file"; then
++      case $deplibs_check_method in
++      "file_magic "*)
++        file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++        MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++        if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++          $EGREP "$file_magic_regex" > /dev/null; then
++          :
++        else
++          cat <<_LT_EOF 1>&2
 +
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
 +
++_LT_EOF
++        fi ;;
++      esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac
++fi
 +
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
++$as_echo "$MAGIC_CMD" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
 +
 +
 +
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++  if test -n "$ac_tool_prefix"; then
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
++$as_echo_n "checking for file... " >&6; }
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  case $MAGIC_CMD in
++[\\/*] |  ?:[\\/]*)
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/file; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/file"
++      if test -n "$file_magic_test_file"; then
++      case $deplibs_check_method in
++      "file_magic "*)
++        file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++        MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++        if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++          $EGREP "$file_magic_regex" > /dev/null; then
++          :
++        else
++          cat <<_LT_EOF 1>&2
 +
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
 +
++_LT_EOF
++        fi ;;
++      esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac
++fi
 +
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
++$as_echo "$MAGIC_CMD" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
 +
 +
++  else
++    MAGIC_CMD=:
++  fi
++fi
 +
++  fi
++  ;;
++esac
 +
++# Use C for the default configuration in the libtool script
 +
++lt_save_CC="$CC"
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +
++# Source file extension for C test sources.
++ac_ext=c
 +
++# Object file extension for compiled C test sources.
++objext=o
++objext=$objext
 +
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
 +
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
 +
 +
 +
 +
 +
 +
 +
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
 +
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 +
++# Allow CC to be a program name with arguments.
++compiler=$CC
 +
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
 +
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
 +
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
 +
 +
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
 +
++lt_prog_compiler_no_builtin_flag=
 +
++if test "$GCC" = yes; then
++  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 +
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_prog_compiler_rtti_exceptions=no
++   ac_outfile=conftest.$ac_objext
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="-fno-rtti -fno-exceptions"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:7917: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:7921: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_rtti_exceptions=yes
++     fi
++   fi
++   $RM conftest*
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 +
++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
++    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
++else
++    :
++fi
 +
++fi
 +
 +
 +
 +
 +
 +
++  lt_prog_compiler_wl=
++lt_prog_compiler_pic=
++lt_prog_compiler_static=
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
++$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 +
++  if test "$GCC" = yes; then
++    lt_prog_compiler_wl='-Wl,'
++    lt_prog_compiler_static='-static'
 +
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++      # AIX 5 now supports IA64 processor
++      lt_prog_compiler_static='-Bstatic'
++      fi
++      ;;
 +
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            lt_prog_compiler_pic='-fPIC'
++        ;;
++      m68k)
++            # FIXME: we need at least 68020 code to build shared libraries, but
++            # adding the `-m68020' flag to GCC prevents building anything better,
++            # like `-m68040'.
++            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
++        ;;
++      esac
++      ;;
 +
++    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
 +
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      # Although the cygwin gcc ignores -fPIC, still need this for old-style
++      # (--disable-auto-import) libraries
++      lt_prog_compiler_pic='-DDLL_EXPORT'
++      ;;
 +
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      lt_prog_compiler_pic='-fno-common'
++      ;;
 +
++    hpux*)
++      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
++      # sets the default TLS model and affects inlining.
++      case $host_cpu in
++      hppa*64*)
++      # +Z the default
++      ;;
++      *)
++      lt_prog_compiler_pic='-fPIC'
++      ;;
++      esac
++      ;;
 +
++    interix[3-9]*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
 +
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      lt_prog_compiler_can_build_shared=no
++      enable_shared=no
++      ;;
 +
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      lt_prog_compiler_pic='-fPIC -shared'
++      ;;
 +
++    sysv4*MP*)
++      if test -d /usr/nec; then
++      lt_prog_compiler_pic=-Kconform_pic
++      fi
++      ;;
 +
++    *)
++      lt_prog_compiler_pic='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      lt_prog_compiler_wl='-Wl,'
++      if test "$host_cpu" = ia64; then
++      # AIX 5 now supports IA64 processor
++      lt_prog_compiler_static='-Bstatic'
++      else
++      lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
 +
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic='-DDLL_EXPORT'
++      ;;
 +
++    hpux9* | hpux10* | hpux11*)
++      lt_prog_compiler_wl='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++      # +Z the default
++      ;;
++      *)
++      lt_prog_compiler_pic='+Z'
++      ;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      lt_prog_compiler_static='${wl}-a ${wl}archive'
++      ;;
 +
++    irix5* | irix6* | nonstopux*)
++      lt_prog_compiler_wl='-Wl,'
++      # PIC (with -KPIC) is the default.
++      lt_prog_compiler_static='-non_shared'
++      ;;
 +
++    linux* | k*bsd*-gnu | kopensolaris*-gnu)
++      case $cc_basename in
++      # old Intel for x86_64 which still supported -KPIC.
++      ecc*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-static'
++        ;;
++      # icc used to be incompatible with GCC.
++      # ICC 10 doesn't accept -KPIC any more.
++      icc* | ifort*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-fPIC'
++      lt_prog_compiler_static='-static'
++        ;;
++      # Lahey Fortran 8.1.
++      lf95*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='--shared'
++      lt_prog_compiler_static='--static'
++      ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++      # which looks to be a dead project)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-fpic'
++      lt_prog_compiler_static='-Bstatic'
++        ;;
++      ccc*)
++        lt_prog_compiler_wl='-Wl,'
++        # All Alpha code is PIC.
++        lt_prog_compiler_static='-non_shared'
++        ;;
++      xl*)
++      # IBM XL C 8.0/Fortran 10.1 on PPC
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-qpic'
++      lt_prog_compiler_static='-qstaticlink'
++      ;;
++      *)
++      case `$CC -V 2>&1 | sed 5q` in
++      *Sun\ C*)
++        # Sun C 5.9
++        lt_prog_compiler_pic='-KPIC'
++        lt_prog_compiler_static='-Bstatic'
++        lt_prog_compiler_wl='-Wl,'
++        ;;
++      *Sun\ F*)
++        # Sun Fortran 8.3 passes all unrecognized flags to the linker
++        lt_prog_compiler_pic='-KPIC'
++        lt_prog_compiler_static='-Bstatic'
++        lt_prog_compiler_wl=''
++        ;;
++      esac
++      ;;
++      esac
++      ;;
 +
++    newsos6)
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
 +
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      lt_prog_compiler_pic='-fPIC -shared'
++      ;;
 +
++    osf3* | osf4* | osf5*)
++      lt_prog_compiler_wl='-Wl,'
++      # All OSF/1 code is PIC.
++      lt_prog_compiler_static='-non_shared'
++      ;;
 +
++    rdos*)
++      lt_prog_compiler_static='-non_shared'
++      ;;
 +
++    solaris*)
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++      lt_prog_compiler_wl='-Qoption ld ';;
++      *)
++      lt_prog_compiler_wl='-Wl,';;
++      esac
++      ;;
 +
++    sunos4*)
++      lt_prog_compiler_wl='-Qoption ld '
++      lt_prog_compiler_pic='-PIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
 +
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
 +
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++      lt_prog_compiler_pic='-Kconform_pic'
++      lt_prog_compiler_static='-Bstatic'
++      fi
++      ;;
 +
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
 +
++    unicos*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_can_build_shared=no
++      ;;
 +
++    uts4*)
++      lt_prog_compiler_pic='-pic'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
 +
++    *)
++      lt_prog_compiler_can_build_shared=no
++      ;;
++    esac
++  fi
 +
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    lt_prog_compiler_pic=
++    ;;
++  *)
++    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
++    ;;
++esac
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
++$as_echo "$lt_prog_compiler_pic" >&6; }
 +
 +
 +
 +
 +
 +
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
++$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
++if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_prog_compiler_pic_works=no
++   ac_outfile=conftest.$ac_objext
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:8256: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:8260: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_pic_works=yes
++     fi
++   fi
++   $RM conftest*
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
++$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 +
++if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
++    case $lt_prog_compiler_pic in
++     "" | " "*) ;;
++     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
++     esac
++else
++    lt_prog_compiler_pic=
++     lt_prog_compiler_can_build_shared=no
++fi
 +
++fi
 +
 +
 +
 +
 +
 +
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
++if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_prog_compiler_static_works=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++   echo "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&5
++       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         lt_cv_prog_compiler_static_works=yes
++       fi
++     else
++       lt_cv_prog_compiler_static_works=yes
++     fi
++   fi
++   $RM -r conftest*
++   LDFLAGS="$save_LDFLAGS"
 +
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
++$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 +
++if test x"$lt_cv_prog_compiler_static_works" = xyes; then
++    :
++else
++    lt_prog_compiler_static=
++fi
 +
 +
 +
 +
 +
 +
- if test "$GCC" = yes; then
-   case $host_os in
-     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-     *) lt_awk_arg="/^libraries:/" ;;
-   esac
-   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-   if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-     # if the path contains ";" then we assume it to be the separator
-     # otherwise default to the standard path separator (i.e. ":") - it is
-     # assumed that no part of a normal pathname contains ";" but that should
-     # okay in the real world where ";" in dirpaths is itself problematic.
-     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-   else
-     lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-   fi
-   # Ok, now we have the path, separated by spaces, we can step through it
-   # and add multilib dir if necessary.
-   lt_tmp_lt_search_path_spec=
-   lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-   for lt_sys_path in $lt_search_path_spec; do
-     if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-     else
-       test -d "$lt_sys_path" && \
-       lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-     fi
-   done
-   lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
- BEGIN {RS=" "; FS="/|\n";} {
-   lt_foo="";
-   lt_count=0;
-   for (lt_i = NF; lt_i > 0; lt_i--) {
-     if ($lt_i != "" && $lt_i != ".") {
-       if ($lt_i == "..") {
-         lt_count++;
-       } else {
-         if (lt_count == 0) {
-           lt_foo="/" $lt_i lt_foo;
-         } else {
-           lt_count--;
-         }
-       }
-     }
-   }
-   if (lt_foo != "") { lt_freq[lt_foo]++; }
-   if (lt_freq[lt_foo] == 1) { print lt_foo; }
- }'`
-   sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 +
-   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
- library_names_spec=
- libname_spec='lib$name'
- soname_spec=
- shrext_cmds=".so"
- postinstall_cmds=
- postuninstall_cmds=
- finish_cmds=
- finish_eval=
- shlibpath_var=
- shlibpath_overrides_runpath=unknown
- version_type=none
- dynamic_linker="$host_os ld.so"
- sys_lib_dlsearch_path_spec="/lib /usr/lib"
- need_lib_prefix=unknown
- hardcode_into_libs=no
++  lt_cv_prog_compiler_c_o=no
++   $RM -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:8361: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:8365: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $RM conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++   $RM out/* && rmdir out
++   cd ..
++   $RM -r conftest
++   $RM conftest*
++
 +fi
- # when you set need_version to no, make sure it does not cause -set_version
- # flags to be left without arguments
- need_version=unknown
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
++$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 +
- case $host_os in
- aix3*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-   shlibpath_var=LIBPATH
 +
-   # AIX 3 has no versioning support, so we append a major version to the name.
-   soname_spec='${libname}${release}${shared_ext}$major'
-   ;;
 +
- aix[4-9]*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   hardcode_into_libs=yes
-   if test "$host_cpu" = ia64; then
-     # AIX 5 supports IA64
-     library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-     shlibpath_var=LD_LIBRARY_PATH
-   else
-     # With GCC up to 2.95.x, collect2 would create an import file
-     # for dependence libraries.  The import file would start with
-     # the line `#! .'.  This would cause the generated library to
-     # depend on `.', always an invalid library.  This was fixed in
-     # development snapshots of GCC prior to 3.0.
-     case $host_os in
-       aix4 | aix4.[01] | aix4.[01].*)
-       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-          echo ' yes '
-          echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-       :
-       else
-       can_build_shared=no
-       fi
-       ;;
-     esac
-     # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-     # soname into executable. Probably we can add versioning support to
-     # collect2, so additional links can be useful in future.
-     if test "$aix_use_runtimelinking" = yes; then
-       # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-       # instead of lib<name>.a to let people know that these are not
-       # typical AIX shared libraries.
-       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     else
-       # We preserve .a as extension for shared libraries through AIX4.2
-       # and later when we are not doing run time linking.
-       library_names_spec='${libname}${release}.a $libname.a'
-       soname_spec='${libname}${release}${shared_ext}$major'
-     fi
-     shlibpath_var=LIBPATH
-   fi
-   ;;
 +
- amigaos*)
-   case $host_cpu in
-   powerpc)
-     # Since July 2007 AmigaOS4 officially supports .so libraries.
-     # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     ;;
-   m68k)
-     library_names_spec='$libname.ixlibrary $libname.a'
-     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-     finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-     ;;
-   esac
-   ;;
 +
- beos*)
-   library_names_spec='${libname}${shared_ext}'
-   dynamic_linker="$host_os ld.so"
-   shlibpath_var=LIBRARY_PATH
-   ;;
 +
- bsdi[45]*)
-   version_type=linux
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-   sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-   # the default ld.so.conf also contains /usr/contrib/lib and
-   # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-   # libtool to hard-code these into programs
-   ;;
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
++$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
++if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  lt_cv_prog_compiler_c_o=no
++   $RM -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +
- cygwin* | mingw* | pw32* | cegcc*)
-   version_type=windows
-   shrext_cmds=".dll"
-   need_version=no
-   need_lib_prefix=no
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:8416: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:8420: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $RM conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++   $RM out/* && rmdir out
++   cd ..
++   $RM -r conftest
++   $RM conftest*
 +
-   case $GCC,$host_os in
-   yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-     library_names_spec='$libname.dll.a'
-     # DLL is installed to $(libdir)/../bin by postinstall_cmds
-     postinstall_cmds='base_file=`basename \${file}`~
-       dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-       dldir=$destdir/`dirname \$dlpath`~
-       test -d \$dldir || mkdir -p \$dldir~
-       $install_prog $dir/$dlname \$dldir/$dlname~
-       chmod a+x \$dldir/$dlname~
-       if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-         eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-       fi'
-     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-       dlpath=$dir/\$dldll~
-        $RM \$dlpath'
-     shlibpath_overrides_runpath=yes
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
++$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 +
-     case $host_os in
-     cygwin*)
-       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-       ;;
-     mingw* | cegcc*)
-       # MinGW DLLs use traditional 'lib' prefix
-       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-       sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-       if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-         # It is most probably a Windows format PATH printed by
-         # mingw gcc, but we are running on Cygwin. Gcc prints its search
-         # path with ; separators, and with drive letters. We can handle the
-         # drive letters (cygwin fileutils understands them), so leave them,
-         # especially as we might pass files found there to a mingw objdump,
-         # which wouldn't understand a cygwinified path. Ahh.
-         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-       else
-         sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-       fi
-       ;;
-     pw32*)
-       # pw32 DLLs use 'pw' prefix rather than 'lib'
-       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-       ;;
-     esac
-     ;;
 +
-   *)
-     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-     ;;
-   esac
-   dynamic_linker='Win32 ld.exe'
-   # FIXME: first we should search . and the directory the executable is in
-   shlibpath_var=PATH
-   ;;
 +
- darwin* | rhapsody*)
-   dynamic_linker="$host_os dyld"
-   version_type=darwin
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-   soname_spec='${libname}${release}${major}$shared_ext'
-   shlibpath_overrides_runpath=yes
-   shlibpath_var=DYLD_LIBRARY_PATH
-   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 +
-   sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-   ;;
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
++$as_echo_n "checking if we can lock with hard links... " >&6; }
++  hard_links=yes
++  $RM conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
++$as_echo "$hard_links" >&6; }
++  if test "$hard_links" = no; then
++    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
 +
- dgux*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   ;;
 +
- freebsd1*)
-   dynamic_linker=no
-   ;;
 +
- freebsd* | dragonfly*)
-   # DragonFly does not have aout.  When/if they implement a new
-   # versioning mechanism, adjust this.
-   if test -x /usr/bin/objformat; then
-     objformat=`/usr/bin/objformat`
-   else
-     case $host_os in
-     freebsd[123]*) objformat=aout ;;
-     *) objformat=elf ;;
-     esac
-   fi
-   version_type=freebsd-$objformat
-   case $version_type in
-     freebsd-elf*)
-       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-       need_version=no
-       need_lib_prefix=no
-       ;;
-     freebsd-*)
-       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-       need_version=yes
-       ;;
-   esac
-   shlibpath_var=LD_LIBRARY_PATH
 +
-   freebsd2*)
-     shlibpath_overrides_runpath=yes
++
++
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
++
++  runpath_var=
++  allow_undefined_flag=
++  always_export_symbols=no
++  archive_cmds=
++  archive_expsym_cmds=
++  compiler_needs_object=no
++  enable_shared_with_static_runtimes=no
++  export_dynamic_flag_spec=
++  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  hardcode_automatic=no
++  hardcode_direct=no
++  hardcode_direct_absolute=no
++  hardcode_libdir_flag_spec=
++  hardcode_libdir_flag_spec_ld=
++  hardcode_libdir_separator=
++  hardcode_minus_L=no
++  hardcode_shlibpath_var=unsupported
++  inherit_rpath=no
++  link_all_deplibs=unknown
++  module_cmds=
++  module_expsym_cmds=
++  old_archive_from_new_cmds=
++  old_archive_from_expsyms_cmds=
++  thread_safe_flag_spec=
++  whole_archive_flag_spec=
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  include_expsyms=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  # Exclude shared library initialization/finalization symbols.
++  extract_expsyms_cmds=
++
 +  case $host_os in
-   freebsd3.[01]* | freebsdelf3.[01]*)
-     shlibpath_overrides_runpath=yes
-     hardcode_into_libs=yes
++  cygwin* | mingw* | pw32* | cegcc*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
 +    ;;
-   freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-   freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-     shlibpath_overrides_runpath=no
-     hardcode_into_libs=yes
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
 +    ;;
-   *) # from 4.6 on, and DragonFly
-     shlibpath_overrides_runpath=yes
-     hardcode_into_libs=yes
++  openbsd*)
++    with_gnu_ld=no
 +    ;;
-   ;;
++  linux* | k*bsd*-gnu)
++    link_all_deplibs=no
 +    ;;
 +  esac
- gnu*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   hardcode_into_libs=yes
-   ;;
 +
- hpux9* | hpux10* | hpux11*)
-   # Give a soname corresponding to the major version so that dld.sl refuses to
-   # link against other versions.
-   version_type=sunos
-   need_lib_prefix=no
-   need_version=no
-   case $host_cpu in
-   ia64*)
-     shrext_cmds='.so'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.so"
-     shlibpath_var=LD_LIBRARY_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     if test "X$HPUX_IA64_MODE" = X32; then
-       sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++  ld_shlibs=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
 +
-       sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++    export_dynamic_flag_spec='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 +    else
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-     shrext_cmds='.sl'
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=SHLIB_PATH
-     shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     ;;
-   esac
-   # HP-UX runs *really* slowly unless shared libraries are mode 555.
-   postinstall_cmds='chmod 555 $lib'
-   ;;
++      whole_archive_flag_spec=
 +    fi
- interix[3-9]*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   ;;
++    supports_anon_versioning=no
++    case `$LD -v 2>&1` in
++      *GNU\ gold*) supports_anon_versioning=yes ;;
++      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
 +
- irix5* | irix6* | nonstopux*)
-   case $host_os in
-     nonstopux*) version_type=nonstopux ;;
-     *)
-       if test "$lt_cv_prog_gnu_ld" = yes; then
-               version_type=linux
-       else
-               version_type=irix
-       fi ;;
-   esac
-   need_lib_prefix=no
-   need_version=no
-   soname_spec='${libname}${release}${shared_ext}$major'
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-   case $host_os in
-   irix5* | nonstopux*)
-     libsuff= shlibsuff=
-     ;;
-   *)
-     case $LD in # libtool.m4 will add one of these switches to LD
-     *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-       libsuff= shlibsuff= libmagic=32-bit;;
-     *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-       libsuff=32 shlibsuff=N32 libmagic=N32;;
-     *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-       libsuff=64 shlibsuff=64 libmagic=64-bit;;
-     *) libsuff= shlibsuff= libmagic=never-match;;
-     esac
-     ;;
-   esac
-   shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-   shlibpath_overrides_runpath=no
-   sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-   sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-   hardcode_into_libs=yes
-   ;;
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix[3-9]*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++      ld_shlibs=no
++      cat <<_LT_EOF 1>&2
 +
- # No shared lib support for Linux oldld, aout, or coff.
- linux*oldld* | linux*aout* | linux*coff*)
-   dynamic_linker=no
-   ;;
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
 +
- # This must be Linux ELF.
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   # Some binutils ld are patched to set DT_RUNPATH
-   save_LDFLAGS=$LDFLAGS
-   save_libdir=$libdir
-   eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-        LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
++_LT_EOF
++      fi
++      ;;
 +
- int
- main ()
- {
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            archive_expsym_cmds=''
++        ;;
++      m68k)
++            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            hardcode_libdir_flag_spec='-L$libdir'
++            hardcode_minus_L=yes
++        ;;
++      esac
++      ;;
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-   shlibpath_overrides_runpath=yes
- fi
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
-   LDFLAGS=$save_LDFLAGS
-   libdir=$save_libdir
++    beos*)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      allow_undefined_flag=unsupported
++      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++      # support --undefined.  This deserves some investigation.  FIXME
++      archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++      ld_shlibs=no
++      fi
++      ;;
 +
-   # This implies no fast_install, which is unacceptable.
-   # Some rework will be needed to allow for fast_install
-   # before this can be enabled.
-   hardcode_into_libs=yes
++    cygwin* | mingw* | pw32* | cegcc*)
++      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
++      # as there is no search path for DLLs.
++      hardcode_libdir_flag_spec='-L$libdir'
++      allow_undefined_flag=unsupported
++      always_export_symbols=no
++      enable_shared_with_static_runtimes=yes
++      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 +
-   # Append ld.so.conf contents to the search path
-   if test -f /etc/ld.so.conf; then
-     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[     ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-   fi
++      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      # If the export-symbols file already is a .def file (1st line
++      # is EXPORTS), use it as is; otherwise, prepend...
++      archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++        cp $export_symbols $output_objdir/$soname.def;
++      else
++        echo EXPORTS > $output_objdir/$soname.def;
++        cat $export_symbols >> $output_objdir/$soname.def;
++      fi~
++      $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++      ld_shlibs=no
++      fi
++      ;;
 +
-   # We used to test for /lib/ld.so.1 and disable shared libraries on
-   # powerpc, because MkLinux only supported shared libraries with the
-   # GNU dynamic linker.  Since this was broken with cross compilers,
-   # most powerpc-linux boxes support dynamic linking these days and
-   # people can always --disable-shared, the test was removed, and we
-   # assume the GNU/Linux dynamic linker is in use.
-   dynamic_linker='GNU/Linux ld.so'
-   ;;
++    interix[3-9]*)
++      hardcode_direct=no
++      hardcode_shlibpath_var=no
++      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++      export_dynamic_flag_spec='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
 +
- netbsdelf*-gnu)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   dynamic_linker='NetBSD ld.elf_so'
-   ;;
++    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++      tmp_diet=no
++      if test "$host_os" = linux-dietlibc; then
++      case $cc_basename in
++        diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
++      esac
++      fi
++      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++       && test "$tmp_diet" = no
++      then
++      tmp_addflag=
++      tmp_sharedflag='-shared'
++      case $cc_basename,$host_cpu in
++        pgcc*)                                # Portland Group C compiler
++        whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        tmp_addflag=' $pic_flag'
++        ;;
++      pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
++        whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        tmp_addflag=' $pic_flag -Mnomain' ;;
++      ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
++        tmp_addflag=' -i_dynamic' ;;
++      efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
++        tmp_addflag=' -i_dynamic -nofor_main' ;;
++      ifc* | ifort*)                  # Intel Fortran compiler
++        tmp_addflag=' -nofor_main' ;;
++      lf95*)                          # Lahey Fortran 8.1
++        whole_archive_flag_spec=
++        tmp_sharedflag='--shared' ;;
++      xl[cC]*)                        # IBM XL C 8.0 on PPC (deal with xlf below)
++        tmp_sharedflag='-qmkshrobj'
++        tmp_addflag= ;;
++      esac
++      case `$CC -V 2>&1 | sed 5q` in
++      *Sun\ C*)                       # Sun C 5.9
++        whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        compiler_needs_object=yes
++        tmp_sharedflag='-G' ;;
++      *Sun\ F*)                       # Sun Fortran 8.3
++        tmp_sharedflag='-G' ;;
++      esac
++      archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +
- netbsd*)
-   version_type=sunos
-   need_lib_prefix=no
-   need_version=no
-   if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-     dynamic_linker='NetBSD (a.out) ld.so'
-   else
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     dynamic_linker='NetBSD ld.elf_so'
-   fi
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   ;;
++        if test "x$supports_anon_versioning" = xyes; then
++          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
++          cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++          echo "local: *; };" >> $output_objdir/$libname.ver~
++          $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++        fi
 +
- newsos6)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   ;;
++      case $cc_basename in
++      xlf*)
++        # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++        whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
++        hardcode_libdir_flag_spec=
++        hardcode_libdir_flag_spec_ld='-rpath $libdir'
++        archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++        if test "x$supports_anon_versioning" = xyes; then
++          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
++            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++            echo "local: *; };" >> $output_objdir/$libname.ver~
++            $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++        fi
++        ;;
++      esac
++      else
++        ld_shlibs=no
++      fi
++      ;;
 +
- *nto* | *qnx*)
-   version_type=qnx
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   dynamic_linker='ldqnx.so'
-   ;;
- 
- openbsd*)
-   version_type=sunos
-   sys_lib_dlsearch_path_spec="/usr/lib"
-   need_lib_prefix=no
-   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-   case $host_os in
-     openbsd3.3 | openbsd3.3.*)        need_version=yes ;;
-     *)                                need_version=no  ;;
-   esac
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-     case $host_os in
-       openbsd2.[89] | openbsd2.[89].*)
-       shlibpath_overrides_runpath=no
-       ;;
-       *)
-       shlibpath_overrides_runpath=yes
-       ;;
-       esac
-   else
-     shlibpath_overrides_runpath=yes
-   fi
-   ;;
- 
- os2*)
-   libname_spec='$name'
-   shrext_cmds=".dll"
-   need_lib_prefix=no
-   library_names_spec='$libname${shared_ext} $libname.a'
-   dynamic_linker='OS/2 ld.exe'
-   shlibpath_var=LIBPATH
-   ;;
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++      archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++      wlarc=
++      else
++      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
 +
- osf3* | osf4* | osf5*)
-   version_type=osf
-   need_lib_prefix=no
-   need_version=no
-   soname_spec='${libname}${release}${shared_ext}$major'
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-   ;;
++    solaris*)
++      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++      ld_shlibs=no
++      cat <<_LT_EOF 1>&2
 +
- rdos*)
-   dynamic_linker=no
-   ;;
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
 +
- solaris*)
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   # ldd complains unless libraries are executable
-   postinstall_cmds='chmod +x $lib'
-   ;;
++_LT_EOF
++      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++      ld_shlibs=no
++      fi
++      ;;
 +
- sunos4*)
-   version_type=sunos
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-   finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   if test "$with_gnu_ld" = yes; then
-     need_lib_prefix=no
-   fi
-   need_version=yes
-   ;;
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++      ld_shlibs=no
++      cat <<_LT_EOF 1>&2
 +
- sysv4 | sysv4.3*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   case $host_vendor in
-     sni)
-       shlibpath_overrides_runpath=no
-       need_lib_prefix=no
-       runpath_var=LD_RUN_PATH
-       ;;
-     siemens)
-       need_lib_prefix=no
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
 +
-     motorola)
-       need_lib_prefix=no
-       need_version=no
-       shlibpath_overrides_runpath=no
-       sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++_LT_EOF
++      ;;
++      *)
++        # For security reasons, it is highly recommended that you always
++        # use absolute paths for naming shared libraries, and exclude the
++        # DT_RUNPATH tag from executables and libraries.  But doing so
++        # requires that you compile everything twice, which is a pain.
++        if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++          hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++          archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++          archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++        else
++          ld_shlibs=no
++        fi
++      ;;
++      esac
 +      ;;
-   esac
-   ;;
++
++    sunos4*)
++      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
 +      ;;
- sysv4*MP*)
-   if test -d /usr/nec ;then
-     version_type=linux
-     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-     soname_spec='$libname${shared_ext}.$major'
-     shlibpath_var=LD_LIBRARY_PATH
-   fi
-   ;;
 +
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-   version_type=freebsd-elf
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=yes
-   hardcode_into_libs=yes
-   if test "$with_gnu_ld" = yes; then
-     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    *)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++      ld_shlibs=no
++      fi
++      ;;
++    esac
 +
-     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    if test "$ld_shlibs" = no; then
++      runpath_var=
++      hardcode_libdir_flag_spec=
++      export_dynamic_flag_spec=
++      whole_archive_flag_spec=
++    fi
 +  else
-       sco3.2v5*)
-         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-       ;;
-     esac
-   fi
-   sys_lib_dlsearch_path_spec='/usr/lib'
-   ;;
- 
- tpf*)
-   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-   version_type=linux
-   need_lib_prefix=no
-   need_version=no
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   shlibpath_var=LD_LIBRARY_PATH
-   shlibpath_overrides_runpath=no
-   hardcode_into_libs=yes
-   ;;
- 
- uts4*)
-   version_type=linux
-   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-   soname_spec='${libname}${release}${shared_ext}$major'
-   shlibpath_var=LD_LIBRARY_PATH
-   ;;
- 
- *)
-   dynamic_linker=no
-   ;;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
- $as_echo "$dynamic_linker" >&6; }
- test "$dynamic_linker" = no && can_build_shared=no
- 
- variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
- if test "$GCC" = yes; then
-   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
- fi
- 
- if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-   sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
- fi
- if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-   sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
- fi
- 
- 
++    # PORTME fill in a description of your system's linker (not GNU ld)
 +    case $host_os in
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
- $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
- hardcode_action=
- if test -n "$hardcode_libdir_flag_spec" ||
-    test -n "$runpath_var" ||
-    test "X$hardcode_automatic" = "Xyes" ; then
++    aix3*)
++      allow_undefined_flag=unsupported
++      always_export_symbols=yes
++      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      hardcode_minus_L=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++      # Neither direct hardcoding nor static linking is supported with a
++      # broken collect2.
++      hardcode_direct=unsupported
++      fi
++      ;;
 +
++    aix[4-9]*)
++      if test "$host_cpu" = ia64; then
++      # On IA64, the linker does run time linking by default, so we don't
++      # have to do anything special.
++      aix_use_runtimelinking=no
++      exp_sym_flag='-Bexport'
++      no_entry_flag=""
++      else
++      # If we're using GNU nm, then we don't want the "-C" option.
++      # -C means demangle to AIX nm, but means don't demangle with GNU nm
++      if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++        export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++      else
++        export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++      fi
++      aix_use_runtimelinking=no
 +
++      # Test if we are trying to use run time linking or normal
++      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++      # need to do runtime linking.
++      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
++        for ld_flag in $LDFLAGS; do
++        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++          aix_use_runtimelinking=yes
++          break
++        fi
++        done
++        ;;
++      esac
 +
++      exp_sym_flag='-bexport'
++      no_entry_flag='-bnoentry'
++      fi
 +
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 +
++      archive_cmds=''
++      hardcode_direct=yes
++      hardcode_direct_absolute=yes
++      hardcode_libdir_separator=':'
++      link_all_deplibs=yes
++      file_list_spec='${wl}-f,'
 +
++      if test "$GCC" = yes; then
++      case $host_os in aix4.[012]|aix4.[012].*)
++      # We only want to do this on AIX 4.2 and lower, the check
++      # below for broken collect2 doesn't work under 4.3+
++        collect2name=`${CC} -print-prog-name=collect2`
++        if test -f "$collect2name" &&
++         strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++        then
++        # We have reworked collect2
++        :
++        else
++        # We have old collect2
++        hardcode_direct=unsupported
++        # It fails to find uninstalled libraries when the uninstalled
++        # path is not listed in the libpath.  Setting hardcode_minus_L
++        # to unsupported forces relinking
++        hardcode_minus_L=yes
++        hardcode_libdir_flag_spec='-L$libdir'
++        hardcode_libdir_separator=
++        fi
++        ;;
++      esac
++      shared_flag='-shared'
++      if test "$aix_use_runtimelinking" = yes; then
++        shared_flag="$shared_flag "'${wl}-G'
++      fi
++      link_all_deplibs=no
++      else
++      # not using gcc
++      if test "$host_cpu" = ia64; then
++      # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++      # chokes on -Wl,-G. The following line is correct:
++        shared_flag='-G'
++      else
++        if test "$aix_use_runtimelinking" = yes; then
++          shared_flag='${wl}-G'
++        else
++          shared_flag='${wl}-bM:SRE'
++        fi
++      fi
++      fi
 +
++      export_dynamic_flag_spec='${wl}-bexpall'
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      always_export_symbols=yes
++      if test "$aix_use_runtimelinking" = yes; then
++      # Warning - without using the other runtime loading flags (-brtl),
++      # -berok will link without error, but may produce a broken library.
++      allow_undefined_flag='-berok'
++        # Determine the default libpath from the value encoded in an
++        # empty executable.
++        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
 +
++lt_aix_libpath_sed='
++    /Import File Strings/,/^$/ {
++      /^0/ {
++          s/^0  *\(.*\)$/\1/
++          p
++      }
++    }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 +
++        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++      else
++      if test "$host_cpu" = ia64; then
++        hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++        allow_undefined_flag="-z nodefs"
++        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++      else
++       # Determine the default libpath from the value encoded in an
++       # empty executable.
++       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++int
++main ()
++{
 +
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
 +
++lt_aix_libpath_sed='
++    /Import File Strings/,/^$/ {
++      /^0/ {
++          s/^0  *\(.*\)$/\1/
++          p
++      }
++    }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 +
++       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++        # Warning - without using the other run time loading flags,
++        # -berok will link without error, but may produce a broken library.
++        no_undefined_flag=' ${wl}-bernotok'
++        allow_undefined_flag=' ${wl}-berok'
++        # Exported symbols can be pulled into shared objects from archives
++        whole_archive_flag_spec='$convenience'
++        archive_cmds_need_lc=yes
++        # This is similar to how AIX traditionally builds its shared libraries.
++        archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++      fi
++      fi
++      ;;
 +
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            archive_expsym_cmds=''
++        ;;
++      m68k)
++            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            hardcode_libdir_flag_spec='-L$libdir'
++            hardcode_minus_L=yes
++        ;;
++      esac
++      ;;
 +
++    bsdi[45]*)
++      export_dynamic_flag_spec=-rdynamic
++      ;;
 +
++    cygwin* | mingw* | pw32* | cegcc*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      hardcode_libdir_flag_spec=' '
++      allow_undefined_flag=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      old_archive_from_new_cmds='true'
++      # FIXME: Should let the user specify the lib program.
++      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
++      fix_srcfile_path='`cygpath -w "$srcfile"`'
++      enable_shared_with_static_runtimes=yes
++      ;;
 +
++    darwin* | rhapsody*)
 +
 +
++  archive_cmds_need_lc=no
++  hardcode_direct=no
++  hardcode_automatic=yes
++  hardcode_shlibpath_var=unsupported
++  whole_archive_flag_spec=''
++  link_all_deplibs=yes
++  allow_undefined_flag="$_lt_dar_allow_undefined"
++  case $cc_basename in
++     ifort*) _lt_dar_can_shared=yes ;;
++     *) _lt_dar_can_shared=$GCC ;;
++  esac
++  if test "$_lt_dar_can_shared" = "yes"; then
++    output_verbose_link_cmd=echo
++    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
 +
++  else
++  ld_shlibs=no
++  fi
 +
++      ;;
 +
++    dgux*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_shlibpath_var=no
++      ;;
 +
++    freebsd1*)
++      ld_shlibs=no
++      ;;
 +
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
 +
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct=yes
++      hardcode_minus_L=yes
++      hardcode_shlibpath_var=no
++      ;;
 +
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
 +
++    hpux9*)
++      if test "$GCC" = yes; then
++      archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++      archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator=:
++      hardcode_direct=yes
 +
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      hardcode_minus_L=yes
++      export_dynamic_flag_spec='${wl}-E'
++      ;;
 +
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++      archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++      hardcode_libdir_flag_spec_ld='+b $libdir'
++      hardcode_libdir_separator=:
++      hardcode_direct=yes
++      hardcode_direct_absolute=yes
++      export_dynamic_flag_spec='${wl}-E'
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      hardcode_minus_L=yes
++      fi
++      ;;
 +
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++      case $host_cpu in
++      hppa*64*)
++        archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      ia64*)
++        archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      *)
++        archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      esac
++      else
++      case $host_cpu in
++      hppa*64*)
++        archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      ia64*)
++        archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      *)
++        archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      esac
++      fi
++      if test "$with_gnu_ld" = no; then
++      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator=:
 +
++      case $host_cpu in
++      hppa*64*|ia64*)
++        hardcode_direct=no
++        hardcode_shlibpath_var=no
++        ;;
++      *)
++        hardcode_direct=yes
++        hardcode_direct_absolute=yes
++        export_dynamic_flag_spec='${wl}-E'
 +
++        # hardcode_minus_L: Not really in the search PATH,
++        # but as the default location of the library.
++        hardcode_minus_L=yes
++        ;;
++      esac
++      fi
++      ;;
 +
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      # Try to use the -exported_symbol ld option, if it does not
++      # work, assume that -exports_file does not work either and
++      # implicitly export all symbols.
++        save_LDFLAGS="$LDFLAGS"
++        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++int foo(void) {}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 +
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++        LDFLAGS="$save_LDFLAGS"
++      else
++      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++      fi
++      archive_cmds_need_lc='no'
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      inherit_rpath=yes
++      link_all_deplibs=yes
++      ;;
 +
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
 +
++    newsos6)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct=yes
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      hardcode_shlibpath_var=no
++      ;;
 +
++    *nto* | *qnx*)
++      ;;
 +
++    openbsd*)
++      if test -f /usr/libexec/ld.so; then
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      hardcode_direct_absolute=yes
++      if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++        archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++        archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++        export_dynamic_flag_spec='${wl}-E'
++      else
++        case $host_os in
++         openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++           archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++           hardcode_libdir_flag_spec='-R$libdir'
++           ;;
++         *)
++           archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++           hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++           ;;
++        esac
++      fi
++      else
++      ld_shlibs=no
++      fi
++      ;;
 +
++    os2*)
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_minus_L=yes
++      allow_undefined_flag=unsupported
++      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
 +
++    osf3*)
++      if test "$GCC" = yes; then
++      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++      allow_undefined_flag=' -expect_unresolved \*'
++      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      archive_cmds_need_lc='no'
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      ;;
 +
++    osf4* | osf5*)    # as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      else
++      allow_undefined_flag=' -expect_unresolved \*'
++      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++      $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 +
++      # Both c and cxx compiler support -rpath directly
++      hardcode_libdir_flag_spec='-rpath $libdir'
++      fi
++      archive_cmds_need_lc='no'
++      hardcode_libdir_separator=:
++      ;;
 +
++    solaris*)
++      no_undefined_flag=' -z defs'
++      if test "$GCC" = yes; then
++      wlarc='${wl}'
++      archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++      else
++      case `$CC -V 2>&1` in
++      *"Compilers 5.0"*)
++        wlarc=''
++        archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++        ;;
++      *)
++        wlarc='${wl}'
++        archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++        archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++        ;;
++      esac
++      fi
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_shlibpath_var=no
++      case $host_os in
++      solaris2.[0-5] | solaris2.[0-5].*) ;;
++      *)
++      # The compiler driver will combine and reorder linker options,
++      # but understands `-z linker_flag'.  GCC discards it without `$wl',
++      # but is careful enough not to reorder.
++      # Supported since Solaris 2.6 (maybe 2.5.1?)
++      if test "$GCC" = yes; then
++        whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++      else
++        whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
++      fi
++      ;;
++      esac
++      link_all_deplibs=yes
++      ;;
 +
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++      # Use $CC to link under sequent, because it throws in some extra .o
++      # files that make .init and .fini sections work.
++      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_direct=yes
++      hardcode_minus_L=yes
++      hardcode_shlibpath_var=no
++      ;;
 +
++    sysv4)
++      case $host_vendor in
++      sni)
++        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        hardcode_direct=yes # is this really true???
++      ;;
++      siemens)
++        ## LD is ld it makes a PLAMLIB
++        ## CC just makes a GrossModule.
++        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++        reload_cmds='$CC -r -o $output$reload_objs'
++        hardcode_direct=no
++        ;;
++      motorola)
++        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++      ;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      hardcode_shlibpath_var=no
++      ;;
 +
++    sysv4.3*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_shlibpath_var=no
++      export_dynamic_flag_spec='-Bexport'
++      ;;
 +
++    sysv4*MP*)
++      if test -d /usr/nec; then
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_shlibpath_var=no
++      runpath_var=LD_RUN_PATH
++      hardcode_runpath_var=yes
++      ld_shlibs=yes
++      fi
++      ;;
 +
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
++      no_undefined_flag='${wl}-z,text'
++      archive_cmds_need_lc=no
++      hardcode_shlibpath_var=no
++      runpath_var='LD_RUN_PATH'
 +
++      if test "$GCC" = yes; then
++      archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
 +
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      no_undefined_flag='${wl}-z,text'
++      allow_undefined_flag='${wl}-z,nodefs'
++      archive_cmds_need_lc=no
++      hardcode_shlibpath_var=no
++      hardcode_libdir_flag_spec='${wl}-R,$libdir'
++      hardcode_libdir_separator=':'
++      link_all_deplibs=yes
++      export_dynamic_flag_spec='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
 +
++      if test "$GCC" = yes; then
++      archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
 +
++    uts4*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_shlibpath_var=no
++      ;;
 +
++    *)
++      ld_shlibs=no
++      ;;
++    esac
 +
++    if test x$host_vendor = xsni; then
++      case $host in
++      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      ;;
++      esac
++    fi
++  fi
 +
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
++$as_echo "$ld_shlibs" >&6; }
++test "$ld_shlibs" = no && can_build_shared=no
 +
++with_gnu_ld=$with_gnu_ld
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc" in
++x|xyes)
++  # Assume -lc should be added
++  archive_cmds_need_lc=yes
 +
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $archive_cmds in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
++$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
++      $RM conftest*
++      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +
++      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$lt_prog_compiler_wl
++      pic_flag=$lt_prog_compiler_pic
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$allow_undefined_flag
++        allow_undefined_flag=
++        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
++  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; }
++        then
++        archive_cmds_need_lc=no
++        else
++        archive_cmds_need_lc=yes
++        fi
++        allow_undefined_flag=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $RM conftest*
++      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
++$as_echo "$archive_cmds_need_lc" >&6; }
++      ;;
++    esac
++  fi
++  ;;
++esac
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
-   # We can hardcode non-existent directories.
-   if test "$hardcode_direct" != no &&
-      # If the only mechanism to avoid hardcoding is shlibpath_var, we
-      # have to relink, otherwise we might link with an installed library
-      # when we should be linking with a yet-to-be-installed one
-      ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
-      test "$hardcode_minus_L" != no; then
-     # Linking always hardcodes the temporary library directory.
-     hardcode_action=relink
-   else
-     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-     hardcode_action=immediate
-   fi
- else
-   # We cannot hardcode anything, or else we can only hardcode existing
-   # directories.
-   hardcode_action=unsupported
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
- $as_echo "$hardcode_action" >&6; }
 +
- if test "$hardcode_action" = relink ||
-    test "$inherit_rpath" = yes; then
-   # Fast installation is not supported
-   enable_fast_install=no
- elif test "$shlibpath_overrides_runpath" = yes ||
-      test "$enable_shared" = no; then
-   # Fast installation is not necessary
-   enable_fast_install=needless
- fi
 +
-   if test "x$enable_dlopen" != xyes; then
-   enable_dlopen=unknown
-   enable_dlopen_self=unknown
-   enable_dlopen_self_static=unknown
- else
-   lt_cv_dlopen=no
-   lt_cv_dlopen_libs=
 +
 +
 +
 +
 +
 +
-   case $host_os in
-   beos*)
-     lt_cv_dlopen="load_add_on"
-     lt_cv_dlopen_libs=
-     lt_cv_dlopen_self=yes
-     ;;
 +
-   mingw* | pw32* | cegcc*)
-     lt_cv_dlopen="LoadLibrary"
-     lt_cv_dlopen_libs=
-     ;;
 +
-   cygwin*)
-     lt_cv_dlopen="dlopen"
-     lt_cv_dlopen_libs=
-     ;;
 +
-   darwin*)
-   # if libdl is installed we need to link against it
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
- $as_echo_n "checking for dlopen in -ldl... " >&6; }
- if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldl  $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char dlopen ();
- int
- main ()
- {
- return dlopen ();
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   ac_cv_lib_dl_dlopen=yes
- else
-   ac_cv_lib_dl_dlopen=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
- $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
- if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
-   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
- else
 +
-     lt_cv_dlopen="dyld"
-     lt_cv_dlopen_libs=
-     lt_cv_dlopen_self=yes
 +
- fi
 +
-     ;;
 +
-   *)
-     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
- if test "x$ac_cv_func_shl_load" = x""yes; then :
-   lt_cv_dlopen="shl_load"
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
- $as_echo_n "checking for shl_load in -ldld... " >&6; }
- if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldld  $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char shl_load ();
- int
- main ()
- {
- return shl_load ();
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   ac_cv_lib_dld_shl_load=yes
- else
-   ac_cv_lib_dld_shl_load=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
- $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
- if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
-   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
- else
-   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
- if test "x$ac_cv_func_dlopen" = x""yes; then :
-   lt_cv_dlopen="dlopen"
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
- $as_echo_n "checking for dlopen in -ldl... " >&6; }
- if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldl  $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char dlopen ();
- int
- main ()
- {
- return dlopen ();
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   ac_cv_lib_dl_dlopen=yes
 +
-   ac_cv_lib_dl_dlopen=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
++$as_echo_n "checking dynamic linker characteristics... " >&6; }
++
++if test "$GCC" = yes; then
++  case $host_os in
++    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++    *) lt_awk_arg="/^libraries:/" ;;
++  esac
++  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++  # Ok, now we have the path, separated by spaces, we can step through it
++  # and add multilib dir if necessary.
++  lt_tmp_lt_search_path_spec=
++  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++  for lt_sys_path in $lt_search_path_spec; do
++    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++    else
++      test -d "$lt_sys_path" && \
++      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++    fi
++  done
++  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++  lt_foo="";
++  lt_count=0;
++  for (lt_i = NF; lt_i > 0; lt_i--) {
++    if ($lt_i != "" && $lt_i != ".") {
++      if ($lt_i == "..") {
++        lt_count++;
++      } else {
++        if (lt_count == 0) {
++          lt_foo="/" $lt_i lt_foo;
++        } else {
++          lt_count--;
++        }
++      }
++    }
++  }
++  if (lt_foo != "") { lt_freq[lt_foo]++; }
++  if (lt_freq[lt_foo] == 1) { print lt_foo; }
++}'`
++  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
- $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
- if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
-   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
- $as_echo_n "checking for dlopen in -lsvld... " >&6; }
- if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
- LIBS="-lsvld  $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 +fi
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char dlopen ();
- int
- main ()
- {
- return dlopen ();
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_link "$LINENO"; then :
-   ac_cv_lib_svld_dlopen=yes
- else
-   ac_cv_lib_svld_dlopen=no
- fi
- rm -f core conftest.err conftest.$ac_objext \
-     conftest$ac_exeext conftest.$ac_ext
- LIBS=$ac_check_lib_save_LIBS
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
- $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
- if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
-   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
- $as_echo_n "checking for dld_link in -ldld... " >&6; }
- if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_check_lib_save_LIBS=$LIBS
- LIBS="-ldld  $LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix[4-9]*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[01] | aix4.[01].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++         echo ' yes '
++         echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++      :
++      else
++      can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  case $host_cpu in
++  powerpc)
++    # Since July 2007 AmigaOS4 officially supports .so libraries.
++    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    ;;
++  m68k)
++    library_names_spec='$libname.ixlibrary $libname.a'
++    # Create ${libname}_ixlibrary.a entries in /sys/libs.
++    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++    ;;
++  esac
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[45]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32* | cegcc*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname~
++      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++      fi'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $RM \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw* | cegcc*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++
++  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[123]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[01]* | freebsdelf3.[01]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  *) # from 4.6 on, and DragonFly
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  hppa*64*)
++    shrext_cmds='.sl'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix[3-9]*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++      if test "$lt_cv_prog_gnu_ld" = yes; then
++              version_type=linux
++      else
++              version_type=irix
++      fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
 +
- /* Override any GCC internal prototype to avoid an error.
-    Use char because int might match the return type of a GCC
-    builtin and then its argument prototype would still apply.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- char dld_link ();
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # Some binutils ld are patched to set DT_RUNPATH
++  save_LDFLAGS=$LDFLAGS
++  save_libdir=$libdir
++  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
++       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
++  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
- return dld_link ();
 +int
 +main ()
 +{
-   ac_cv_lib_dld_dld_link=yes
- else
-   ac_cv_lib_dld_dld_link=no
++
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_link "$LINENO"; then :
- LIBS=$ac_check_lib_save_LIBS
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
- $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
- if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
-   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
- fi
++  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
++  shlibpath_overrides_runpath=yes
++fi
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
- fi
++  LDFLAGS=$save_LDFLAGS
++  libdir=$save_libdir
++
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[     ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++*nto* | *qnx*)
++  version_type=qnx
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='ldqnx.so'
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*)        need_version=yes ;;
++    *)                                need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[89] | openbsd2.[89].*)
++      shlibpath_overrides_runpath=no
++      ;;
++      *)
++      shlibpath_overrides_runpath=yes
++      ;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++rdos*)
++  dynamic_linker=no
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
 +
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
 +
- fi
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++      ;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
 +
++tpf*)
++  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
 +
- 
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
 +
++*)
++  dynamic_linker=no
++  ;;
++esac
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
++$as_echo "$dynamic_linker" >&6; }
++test "$dynamic_linker" = no && can_build_shared=no
 +
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 +fi
 +
- 
- 
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
 +fi
-     ;;
-   esac
- 
-   if test "x$lt_cv_dlopen" != xno; then
-     enable_dlopen=yes
-   else
-     enable_dlopen=no
-   fi
- 
-   case $lt_cv_dlopen in
-   dlopen)
-     save_CPPFLAGS="$CPPFLAGS"
-     test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- 
-     save_LDFLAGS="$LDFLAGS"
-     wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- 
-     save_LIBS="$LIBS"
-     LIBS="$lt_cv_dlopen_libs $LIBS"
- 
-     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
- $as_echo_n "checking whether a program can dlopen itself... " >&6; }
- if test "${lt_cv_dlopen_self+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-         if test "$cross_compiling" = yes; then :
-   lt_cv_dlopen_self=cross
- else
-   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-   lt_status=$lt_dlunknown
-   cat > conftest.$ac_ext <<_LT_EOF
- #line 10257 "configure"
- #include "confdefs.h"
- 
- #if HAVE_DLFCN_H
- #include <dlfcn.h>
- #endif
- 
- #include <stdio.h>
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 +fi
 +
- #ifdef RTLD_GLOBAL
- #  define LT_DLGLOBAL         RTLD_GLOBAL
- #else
- #  ifdef DL_GLOBAL
- #    define LT_DLGLOBAL               DL_GLOBAL
- #  else
- #    define LT_DLGLOBAL               0
- #  endif
- #endif
 +
- /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-    find out it does not work in some platform. */
- #ifndef LT_DLLAZY_OR_NOW
- #  ifdef RTLD_LAZY
- #    define LT_DLLAZY_OR_NOW          RTLD_LAZY
- #  else
- #    ifdef DL_LAZY
- #      define LT_DLLAZY_OR_NOW                DL_LAZY
- #    else
- #      ifdef RTLD_NOW
- #        define LT_DLLAZY_OR_NOW      RTLD_NOW
- #      else
- #        ifdef DL_NOW
- #          define LT_DLLAZY_OR_NOW    DL_NOW
- #        else
- #          define LT_DLLAZY_OR_NOW    0
- #        endif
- #      endif
- #    endif
- #  endif
- #endif
 +
- void fnord() { int i=42;}
- int main ()
- {
-   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-   int status = $lt_dlunknown;
 +
-   if (self)
-     {
-       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-       /* dlclose (self); */
-     }
-   else
-     puts (dlerror ());
 +
-   return status;
- }
- _LT_EOF
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-   (eval $ac_link) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-     (./conftest; exit; ) >&5 2>/dev/null
-     lt_status=$?
-     case x$lt_status in
-       x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-       x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-       x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-     esac
-   else :
-     # compilation failed
-     lt_cv_dlopen_self=no
-   fi
- fi
- rm -fr conftest*
 +
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
- $as_echo "$lt_cv_dlopen_self" >&6; }
 +
 +
-     if test "x$lt_cv_dlopen_self" = xyes; then
-       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
- $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
- if test "${lt_cv_dlopen_self_static+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-         if test "$cross_compiling" = yes; then :
-   lt_cv_dlopen_self_static=cross
- else
-   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-   lt_status=$lt_dlunknown
-   cat > conftest.$ac_ext <<_LT_EOF
- #line 10353 "configure"
- #include "confdefs.h"
 +
- #if HAVE_DLFCN_H
- #include <dlfcn.h>
- #endif
 +
- #include <stdio.h>
 +
- #ifdef RTLD_GLOBAL
- #  define LT_DLGLOBAL         RTLD_GLOBAL
- #else
- #  ifdef DL_GLOBAL
- #    define LT_DLGLOBAL               DL_GLOBAL
- #  else
- #    define LT_DLGLOBAL               0
- #  endif
- #endif
 +
- /* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-    find out it does not work in some platform. */
- #ifndef LT_DLLAZY_OR_NOW
- #  ifdef RTLD_LAZY
- #    define LT_DLLAZY_OR_NOW          RTLD_LAZY
- #  else
- #    ifdef DL_LAZY
- #      define LT_DLLAZY_OR_NOW                DL_LAZY
- #    else
- #      ifdef RTLD_NOW
- #        define LT_DLLAZY_OR_NOW      RTLD_NOW
- #      else
- #        ifdef DL_NOW
- #          define LT_DLLAZY_OR_NOW    DL_NOW
- #        else
- #          define LT_DLLAZY_OR_NOW    0
- #        endif
- #      endif
- #    endif
- #  endif
- #endif
 +
- void fnord() { int i=42;}
- int main ()
- {
-   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-   int status = $lt_dlunknown;
 +
-   if (self)
-     {
-       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-       else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-       /* dlclose (self); */
-     }
-   else
-     puts (dlerror ());
 +
-   return status;
- }
- _LT_EOF
-   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
-   (eval $ac_link) 2>&5
-   ac_status=$?
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
-     (./conftest; exit; ) >&5 2>/dev/null
-     lt_status=$?
-     case x$lt_status in
-       x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-       x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-       x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-     esac
-   else :
-     # compilation failed
-     lt_cv_dlopen_self_static=no
-   fi
- fi
- rm -fr conftest*
 +
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
- $as_echo "$lt_cv_dlopen_self_static" >&6; }
-     fi
 +
 +
-     CPPFLAGS="$save_CPPFLAGS"
-     LDFLAGS="$save_LDFLAGS"
-     LIBS="$save_LIBS"
-     ;;
-   esac
 +
-   case $lt_cv_dlopen_self in
-   yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-   *) enable_dlopen_self=unknown ;;
-   esac
 +
-   case $lt_cv_dlopen_self_static in
-   yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-   *) enable_dlopen_self_static=unknown ;;
-   esac
- fi
 +
- striplib=
- old_striplib=
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
- $as_echo_n "checking whether stripping libraries is possible... " >&6; }
- if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
- else
- # FIXME - insert some real tests, host_os isn't really good enough
-   case $host_os in
-   darwin*)
-     if test -n "$STRIP" ; then
-       striplib="$STRIP -x"
-       old_striplib="$STRIP -S"
-       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
- $as_echo "yes" >&6; }
-     else
-       { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
-     fi
-     ;;
-   *)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
-     ;;
-   esac
- fi
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
-   # Report which library types will actually be built
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
- $as_echo_n "checking if libtool supports shared libraries... " >&6; }
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
- $as_echo "$can_build_shared" >&6; }
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
- $as_echo_n "checking whether to build shared libraries... " >&6; }
-   test "$can_build_shared" = "no" && enable_shared=no
 +
-   # On AIX, shared libraries and static libraries use the same namespace, and
-   # are all built from PIC.
-   case $host_os in
-   aix3*)
-     test "$enable_shared" = yes && enable_static=no
-     if test -n "$RANLIB"; then
-       archive_cmds="$archive_cmds~\$RANLIB \$lib"
-       postinstall_cmds='$RANLIB $lib'
-     fi
-     ;;
 +
-   aix[4-9]*)
-     if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-       test "$enable_shared" = yes && enable_static=no
-     fi
-     ;;
-   esac
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
- $as_echo "$enable_shared" >&6; }
 +
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
- $as_echo_n "checking whether to build static libraries... " >&6; }
-   # Make sure either enable_shared or enable_static is yes.
-   test "$enable_shared" = yes || enable_static=yes
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
- $as_echo "$enable_static" >&6; }
 +
- fi
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +
 +
 +
- CC="$lt_save_CC"
 +
-         ac_config_commands="$ac_config_commands libtool"
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
- # Only expand once:
 +
 +
 +
 +
- ac_ext=c
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
- ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
- ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test -n "$ac_tool_prefix"; then
-   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}gcc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
 +
 +
 +
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
++
++
++
++
++
++
++
++
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
++$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
++hardcode_action=
++if test -n "$hardcode_libdir_flag_spec" ||
++   test -n "$runpath_var" ||
++   test "X$hardcode_automatic" = "Xyes" ; then
++
++  # We can hardcode non-existent directories.
++  if test "$hardcode_direct" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
++     test "$hardcode_minus_L" != no; then
++    # Linking always hardcodes the temporary library directory.
++    hardcode_action=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    hardcode_action=immediate
++  fi
 +else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  hardcode_action=unsupported
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
++$as_echo "$hardcode_action" >&6; }
++
++if test "$hardcode_action" = relink ||
++   test "$inherit_rpath" = yes; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++
++
++
++
++
++
++  if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
 +else
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32* | cegcc*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++    ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++    ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl  $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_dl_dlopen=yes
++else
++  ac_cv_lib_dl_dlopen=no
 +fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
 +fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
++
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++
++fi
++
++    ;;
++
++  *)
++    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
++if test "x$ac_cv_func_shl_load" = x""yes; then :
++  lt_cv_dlopen="shl_load"
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
++$as_echo_n "checking for shl_load in -ldld... " >&6; }
++if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld  $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char shl_load ();
++int
++main ()
++{
++return shl_load ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_dld_shl_load=yes
 +else
- 
- 
++  ac_cv_lib_dld_shl_load=no
 +fi
- if test -z "$ac_cv_prog_CC"; then
-   ac_ct_CC=$CC
-   # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
 +fi
-   if test -n "$ac_ct_CC"; then
-   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
++$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
++if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
++  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 +else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="gcc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
++if test "x$ac_cv_func_dlopen" = x""yes; then :
++  lt_cv_dlopen="dlopen"
 +else
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
++$as_echo_n "checking for dlopen in -ldl... " >&6; }
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl  $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_dl_dlopen=yes
++else
++  ac_cv_lib_dl_dlopen=no
 +fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
 +fi
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
++$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
++if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 +else
-   if test "x$ac_ct_CC" = x; then
-     CC=""
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     CC=$ac_ct_CC
-   fi
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
++$as_echo_n "checking for dlopen in -lsvld... " >&6; }
++if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-lsvld  $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
-   CC="$ac_cv_prog_CC"
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dlopen ();
++int
++main ()
++{
++return dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_svld_dlopen=yes
 +else
- 
- if test -z "$CC"; then
-           if test -n "$ac_tool_prefix"; then
-     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
- set dummy ${ac_tool_prefix}cc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
++  ac_cv_lib_svld_dlopen=no
 +fi
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
++$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
++if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 +else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="${ac_tool_prefix}cc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
++$as_echo_n "checking for dld_link in -ldld... " >&6; }
++if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
++  $as_echo_n "(cached) " >&6
 +else
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld  $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
 +
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char dld_link ();
++int
++main ()
++{
++return dld_link ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_dld_dld_link=yes
++else
++  ac_cv_lib_dld_dld_link=no
 +fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
 +fi
-   fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
++$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
++if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
++  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 +fi
 +
 +
- if test -z "$CC"; then
-   # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
- else
-   ac_prog_rejected=no
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-        continue
-      fi
-     ac_cv_prog_CC="cc"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
 +fi
- if test $ac_prog_rejected = yes; then
-   # We found a bogon in the path, so make sure we never use it.
-   set dummy $ac_cv_prog_CC
-   shift
-   if test $# != 0; then
-     # We chose a different compiler from the bogus one.
-     # However, it has the same basename, so the bogon will be chosen
-     # first if we set CC to just the basename; use the full file name.
-     shift
-     ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-   fi
- fi
 +
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
++
 +fi
++
++
 +fi
- if test -z "$CC"; then
-   if test -n "$ac_tool_prefix"; then
-   for ac_prog in cl.exe
-   do
-     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
- set dummy $ac_tool_prefix$ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_CC+set}" = set; then :
++
++
 +fi
 +
 +
 +fi
-   if test -n "$CC"; then
-   ac_cv_prog_CC="$CC" # Let the user override the test.
++
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
++$as_echo_n "checking whether a program can dlopen itself... " >&6; }
++if test "${lt_cv_dlopen_self+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
-   fi
- done
-   done
- IFS=$as_save_IFS
++        if test "$cross_compiling" = yes; then :
++  lt_cv_dlopen_self=cross
 +else
- fi
- CC=$ac_cv_prog_CC
- if test -n "$CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
- $as_echo "$CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<_LT_EOF
++#line 10800 "configure"
++#include "confdefs.h"
 +
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL         RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL               DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL               0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW          RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW                DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW      RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW    DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW    0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++  return status;
++}
++_LT_EOF
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&5 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
++      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
++      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
++    esac
++  else :
++    # compilation failed
++    lt_cv_dlopen_self=no
++  fi
 +fi
-     test -n "$CC" && break
-   done
++rm -fr conftest*
 +
 +
- if test -z "$CC"; then
-   ac_ct_CC=$CC
-   for ac_prog in cl.exe
- do
-   # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
- $as_echo_n "checking for $ac_word... " >&6; }
- if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
 +fi
-   if test -n "$ac_ct_CC"; then
-   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
++$as_echo "$lt_cv_dlopen_self" >&6; }
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
++$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
++if test "${lt_cv_dlopen_self_static+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
- for as_dir in $PATH
- do
-   IFS=$as_save_IFS
-   test -z "$as_dir" && as_dir=.
-     for ac_exec_ext in '' $ac_executable_extensions; do
-   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-     ac_cv_prog_ac_ct_CC="$ac_prog"
-     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-     break 2
++        if test "$cross_compiling" = yes; then :
++  lt_cv_dlopen_self_static=cross
 +else
- done
-   done
- IFS=$as_save_IFS
- 
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<_LT_EOF
++#line 10896 "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL         RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL               DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL               0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW          RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW                DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW      RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW    DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW    0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++  return status;
++}
++_LT_EOF
++  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
++  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&5 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
++      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
++      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
++    esac
++  else :
++    # compilation failed
++    lt_cv_dlopen_self_static=no
 +  fi
- ac_ct_CC=$ac_cv_prog_ac_ct_CC
- if test -n "$ac_ct_CC"; then
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
- $as_echo "$ac_ct_CC" >&6; }
- else
-   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
- $as_echo "no" >&6; }
- fi
 +fi
++rm -fr conftest*
++
++
 +fi
-   test -n "$ac_ct_CC" && break
- done
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
++$as_echo "$lt_cv_dlopen_self_static" >&6; }
++    fi
 +
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
 +
-   if test "x$ac_ct_CC" = x; then
-     CC=""
-   else
-     case $cross_compiling:$ac_tool_warned in
- yes:)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
- $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
- ac_tool_warned=yes ;;
- esac
-     CC=$ac_ct_CC
-   fi
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
 +
- fi
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
 +fi
 +
- test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
- $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- as_fn_error $? "no acceptable C compiler found in \$PATH
- See \`config.log' for more details" "$LINENO" 5 ; }
 +
 +
- # Provide some information about the compiler.
- $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
- set X $ac_compile
- ac_compiler=$2
- for ac_option in --version -v -V -qversion; do
-   { { ac_try="$ac_compiler $ac_option >&5"
- case "(($ac_try" in
-   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-   *) ac_try_echo=$ac_try;;
- esac
- eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
- $as_echo "$ac_try_echo"; } >&5
-   (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-   ac_status=$?
-   if test -s conftest.err; then
-     sed '10a\
- ... rest of stderr output deleted ...
-          10q' conftest.err >conftest.er1
-     cat conftest.er1 >&5
-   fi
-   rm -f conftest.er1 conftest.err
-   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-   test $ac_status = 0; }
- done
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
- $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
- if test "${ac_cv_c_compiler_gnu+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
- #ifndef __GNUC__
-        choke me
- #endif
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_compiler_gnu=yes
- else
-   ac_compiler_gnu=no
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_cv_c_compiler_gnu=$ac_compiler_gnu
 +
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
- $as_echo "$ac_cv_c_compiler_gnu" >&6; }
- if test $ac_compiler_gnu = yes; then
-   GCC=yes
- else
-   GCC=
- fi
- ac_test_CFLAGS=${CFLAGS+set}
- ac_save_CFLAGS=$CFLAGS
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
- $as_echo_n "checking whether $CC accepts -g... " >&6; }
- if test "${ac_cv_prog_cc_g+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_save_c_werror_flag=$ac_c_werror_flag
-    ac_c_werror_flag=yes
-    ac_cv_prog_cc_g=no
-    CFLAGS="-g"
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_g=yes
- else
-   CFLAGS=""
-       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
 +
- else
-   ac_c_werror_flag=$ac_save_c_werror_flag
-        CFLAGS="-g"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
 +
- int
- main ()
- {
 +
-   ;
-   return 0;
- }
- _ACEOF
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_g=yes
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    ac_c_werror_flag=$ac_save_c_werror_flag
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
- $as_echo "$ac_cv_prog_cc_g" >&6; }
- if test "$ac_test_CFLAGS" = set; then
-   CFLAGS=$ac_save_CFLAGS
- elif test $ac_cv_prog_cc_g = yes; then
-   if test "$GCC" = yes; then
-     CFLAGS="-g -O2"
-   else
-     CFLAGS="-g"
-   fi
 +
-   if test "$GCC" = yes; then
-     CFLAGS="-O2"
-   else
-     CFLAGS=
-   fi
++
++
++striplib=
++old_striplib=
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
++$as_echo_n "checking whether stripping libraries is possible... " >&6; }
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
 +else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
- $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
- if test "${ac_cv_prog_cc_c89+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   ac_cv_prog_cc_c89=no
- ac_save_CC=$CC
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- #include <stdarg.h>
- #include <stdio.h>
- #include <sys/types.h>
- #include <sys/stat.h>
- /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
- struct buf { int x; };
- FILE * (*rcsopen) (struct buf *, struct stat *, int);
- static char *e (p, i)
-      char **p;
-      int i;
- {
-   return p[i];
- }
- static char *f (char * (*g) (char **, int), char **p, ...)
- {
-   char *s;
-   va_list v;
-   va_start (v,p);
-   s = g (p, va_arg (v,int));
-   va_end (v);
-   return s;
- }
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++  darwin*)
++    if test -n "$STRIP" ; then
++      striplib="$STRIP -x"
++      old_striplib="$STRIP -S"
++      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++    else
++      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++    fi
++    ;;
++  *)
++    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++    ;;
++  esac
 +fi
- /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
-    function prototypes and stuff, but not '\xHH' hex character constants.
-    These don't provoke an error unfortunately, instead are silently treated
-    as 'x'.  The following induces an error, until -std is added to get
-    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
-    array size at least.  It's necessary to write '\x00'==0 to get something
-    that's true only with -std.  */
- int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 +
- /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
-    inside strings and character constants.  */
- #define FOO(x) 'x'
- int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
 +
- int test (int i, double x);
- struct s1 {int (*f) (int a);};
- struct s2 {int (*f) (double a);};
- int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
- int argc;
- char **argv;
- int
- main ()
- {
- return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
-   ;
-   return 0;
- }
- _ACEOF
- for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-       -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
- do
-   CC="$ac_save_CC $ac_arg"
-   if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_prog_cc_c89=$ac_arg
- fi
- rm -f core conftest.err conftest.$ac_objext
-   test "x$ac_cv_prog_cc_c89" != "xno" && break
- done
- rm -f conftest.$ac_ext
- CC=$ac_save_CC
 +
- fi
- # AC_CACHE_VAL
- case "x$ac_cv_prog_cc_c89" in
-   x)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
- $as_echo "none needed" >&6; } ;;
-   xno)
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
- $as_echo "unsupported" >&6; } ;;
-   *)
-     CC="$CC $ac_cv_prog_cc_c89"
-     { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
- $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
- esac
- if test "x$ac_cv_prog_cc_c89" != xno; then :
 +
- fi
 +
- depcc="$CC"   am_compiler_list=
 +
++
++
++
++
++
++
++  # Report which library types will actually be built
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
++$as_echo_n "checking if libtool supports shared libraries... " >&6; }
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
++$as_echo "$can_build_shared" >&6; }
++
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
++$as_echo_n "checking whether to build shared libraries... " >&6; }
++  test "$can_build_shared" = "no" && enable_shared=no
++
++  # On AIX, shared libraries and static libraries use the same namespace, and
++  # are all built from PIC.
++  case $host_os in
++  aix3*)
++    test "$enable_shared" = yes && enable_static=no
++    if test -n "$RANLIB"; then
++      archive_cmds="$archive_cmds~\$RANLIB \$lib"
++      postinstall_cmds='$RANLIB $lib'
++    fi
++    ;;
++
++  aix[4-9]*)
++    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++      test "$enable_shared" = yes && enable_static=no
++    fi
++    ;;
++  esac
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
++$as_echo "$enable_shared" >&6; }
++
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
++$as_echo_n "checking whether to build static libraries... " >&6; }
++  # Make sure either enable_shared or enable_static is yes.
++  test "$enable_shared" = yes || enable_static=yes
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
++$as_echo "$enable_static" >&6; }
++
++
++
++
++fi
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
- $as_echo_n "checking dependency style of $depcc... " >&6; }
- if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-   # We make a subdir and do the tests there.  Otherwise we can end up
-   # making bogus files that we don't know about and never remove.  For
-   # instance it was reported that on HP-UX the gcc test will end up
-   # making a dummy file named `D' -- because `-MD' means `put the output
-   # in D'.
-   mkdir conftest.dir
-   # Copy depcomp to subdir because otherwise we won't find it if we're
-   # using a relative directory.
-   cp "$am_depcomp" conftest.dir
-   cd conftest.dir
-   # We will build objects and dependencies in a subdirectory because
-   # it helps to detect inapplicable dependency modes.  For instance
-   # both Tru64's cc and ICC support -MD to output dependencies as a
-   # side effect of compilation, but ICC will put the dependencies in
-   # the current directory while Tru64 will put them in the object
-   # directory.
-   mkdir sub
++CC="$lt_save_CC"
 +
-   am_cv_CC_dependencies_compiler_type=none
-   if test "$am_compiler_list" = ""; then
-      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-   fi
-   am__universal=false
-   case " $depcc " in #(
-      *\ -arch\ *\ -arch\ *) am__universal=true ;;
-      esac
 +
-   for depmode in $am_compiler_list; do
-     # Setup a source with many dependencies, because some compilers
-     # like to wrap large dependency lists on column 80 (with \), and
-     # we should not choose a depcomp mode which is confused by this.
-     #
-     # We need to recreate these files for each test, as the compiler may
-     # overwrite some of them when testing with obscure command lines.
-     # This happens at least with the AIX C compiler.
-     : > sub/conftest.c
-     for i in 1 2 3 4 5 6; do
-       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-       # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-       # Solaris 8's {/usr,}/bin/sh.
-       touch sub/conftst$i.h
-     done
-     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 +
-     # We check with `-c' and `-o' for the sake of the "dashmstdout"
-     # mode.  It turns out that the SunPro C++ compiler does not properly
-     # handle `-M -o', and we need to detect this.  Also, some Intel
-     # versions had trouble with output in subdirs
-     am__obj=sub/conftest.${OBJEXT-o}
-     am__minus_obj="-o $am__obj"
-     case $depmode in
-     gcc)
-       # This depmode causes a compiler race in universal mode.
-       test "$am__universal" = false || continue
-       ;;
-     nosideeffect)
-       # after this tag, mechanisms are not by side-effect, so they'll
-       # only be used when explicitly requested
-       if test "x$enable_dependency_tracking" = xyes; then
-       continue
-       else
-       break
-       fi
-       ;;
-     msvisualcpp | msvcmsys)
-       # This compiler won't grok `-c -o', but also, the minuso test has
-       # not run yet.  These depmodes are late enough in the game, and
-       # so weak that their functioning should not be impacted.
-       am__obj=conftest.${OBJEXT-o}
-       am__minus_obj=
-       ;;
-     none) break ;;
-     esac
-     if depmode=$depmode \
-        source=sub/conftest.c object=$am__obj \
-        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-        $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-          >/dev/null 2>conftest.err &&
-        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-        grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-       # icc doesn't choke on unknown options, it will just issue warnings
-       # or remarks (even with -Werror).  So we grep stderr for any message
-       # that says an option was ignored or not supported.
-       # When given -MP, icc 7.0 and 7.1 complain thusly:
-       #   icc: Command line warning: ignoring option '-M'; no argument required
-       # The diagnosis changed in icc 8.0:
-       #   icc: Command line remark: option '-MP' not supported
-       if (grep 'ignoring option' conftest.err ||
-           grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-         am_cv_CC_dependencies_compiler_type=$depmode
-         break
-       fi
-     fi
-   done
 +
-   cd ..
-   rm -rf conftest.dir
- else
-   am_cv_CC_dependencies_compiler_type=none
- fi
 +
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
- $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
- CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 +
-  if
-   test "x$enable_dependency_tracking" != xno \
-   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-   am__fastdepCC_TRUE=
-   am__fastdepCC_FALSE='#'
- else
-   am__fastdepCC_TRUE='#'
-   am__fastdepCC_FALSE=
- fi
 +
-    (eval echo "\"\$as_me:13907: $lt_compile\"" >&5)
++
++
++
++
++
++
++        ac_config_commands="$ac_config_commands libtool"
++
++
++
++
++# Only expand once:
++
 +
 +
 +ac_ext=cpp
 +ac_cpp='$CXXCPP $CPPFLAGS'
 +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 +if test -z "$CXX"; then
 +  if test -n "$CCC"; then
 +    CXX=$CCC
 +  else
 +    if test -n "$ac_tool_prefix"; then
 +  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
 +  do
 +    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 +set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
 +if test "${ac_cv_prog_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -n "$CXX"; then
 +  ac_cv_prog_CXX="$CXX" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
 +    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
 +CXX=$ac_cv_prog_CXX
 +if test -n "$CXX"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
 +$as_echo "$CXX" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +    test -n "$CXX" && break
 +  done
 +fi
 +if test -z "$CXX"; then
 +  ac_ct_CXX=$CXX
 +  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
 +do
 +  # Extract the first word of "$ac_prog", so it can be a program name with args.
 +set dummy $ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
 +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -n "$ac_ct_CXX"; then
 +  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
 +    ac_cv_prog_ac_ct_CXX="$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
 +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
 +if test -n "$ac_ct_CXX"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
 +$as_echo "$ac_ct_CXX" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +  test -n "$ac_ct_CXX" && break
 +done
 +
 +  if test "x$ac_ct_CXX" = x; then
 +    CXX="g++"
 +  else
 +    case $cross_compiling:$ac_tool_warned in
 +yes:)
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 +ac_tool_warned=yes ;;
 +esac
 +    CXX=$ac_ct_CXX
 +  fi
 +fi
 +
 +  fi
 +fi
 +# Provide some information about the compiler.
 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
 +set X $ac_compile
 +ac_compiler=$2
 +for ac_option in --version -v -V -qversion; do
 +  { { ac_try="$ac_compiler $ac_option >&5"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    sed '10a\
 +... rest of stderr output deleted ...
 +         10q' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +  fi
 +  rm -f conftest.er1 conftest.err
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; }
 +done
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
 +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +#ifndef __GNUC__
 +       choke me
 +#endif
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_compiler_gnu=yes
 +else
 +  ac_compiler_gnu=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
 +if test $ac_compiler_gnu = yes; then
 +  GXX=yes
 +else
 +  GXX=
 +fi
 +ac_test_CXXFLAGS=${CXXFLAGS+set}
 +ac_save_CXXFLAGS=$CXXFLAGS
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 +$as_echo_n "checking whether $CXX accepts -g... " >&6; }
 +if test "${ac_cv_prog_cxx_g+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
 +   ac_cxx_werror_flag=yes
 +   ac_cv_prog_cxx_g=no
 +   CXXFLAGS="-g"
 +   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_cv_prog_cxx_g=yes
 +else
 +  CXXFLAGS=""
 +      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +
 +else
 +  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 +       CXXFLAGS="-g"
 +       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_cv_prog_cxx_g=yes
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
 +$as_echo "$ac_cv_prog_cxx_g" >&6; }
 +if test "$ac_test_CXXFLAGS" = set; then
 +  CXXFLAGS=$ac_save_CXXFLAGS
 +elif test $ac_cv_prog_cxx_g = yes; then
 +  if test "$GXX" = yes; then
 +    CXXFLAGS="-g -O2"
 +  else
 +    CXXFLAGS="-g"
 +  fi
 +else
 +  if test "$GXX" = yes; then
 +    CXXFLAGS="-O2"
 +  else
 +    CXXFLAGS=
 +  fi
 +fi
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +depcc="$CXX"  am_compiler_list=
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 +$as_echo_n "checking dependency style of $depcc... " >&6; }
 +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
 +  # We make a subdir and do the tests there.  Otherwise we can end up
 +  # making bogus files that we don't know about and never remove.  For
 +  # instance it was reported that on HP-UX the gcc test will end up
 +  # making a dummy file named `D' -- because `-MD' means `put the output
 +  # in D'.
 +  mkdir conftest.dir
 +  # Copy depcomp to subdir because otherwise we won't find it if we're
 +  # using a relative directory.
 +  cp "$am_depcomp" conftest.dir
 +  cd conftest.dir
 +  # We will build objects and dependencies in a subdirectory because
 +  # it helps to detect inapplicable dependency modes.  For instance
 +  # both Tru64's cc and ICC support -MD to output dependencies as a
 +  # side effect of compilation, but ICC will put the dependencies in
 +  # the current directory while Tru64 will put them in the object
 +  # directory.
 +  mkdir sub
 +
 +  am_cv_CXX_dependencies_compiler_type=none
 +  if test "$am_compiler_list" = ""; then
 +     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
 +  fi
 +  am__universal=false
 +  case " $depcc " in #(
 +     *\ -arch\ *\ -arch\ *) am__universal=true ;;
 +     esac
 +
 +  for depmode in $am_compiler_list; do
 +    # Setup a source with many dependencies, because some compilers
 +    # like to wrap large dependency lists on column 80 (with \), and
 +    # we should not choose a depcomp mode which is confused by this.
 +    #
 +    # We need to recreate these files for each test, as the compiler may
 +    # overwrite some of them when testing with obscure command lines.
 +    # This happens at least with the AIX C compiler.
 +    : > sub/conftest.c
 +    for i in 1 2 3 4 5 6; do
 +      echo '#include "conftst'$i'.h"' >> sub/conftest.c
 +      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
 +      # Solaris 8's {/usr,}/bin/sh.
 +      touch sub/conftst$i.h
 +    done
 +    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 +
 +    # We check with `-c' and `-o' for the sake of the "dashmstdout"
 +    # mode.  It turns out that the SunPro C++ compiler does not properly
 +    # handle `-M -o', and we need to detect this.  Also, some Intel
 +    # versions had trouble with output in subdirs
 +    am__obj=sub/conftest.${OBJEXT-o}
 +    am__minus_obj="-o $am__obj"
 +    case $depmode in
 +    gcc)
 +      # This depmode causes a compiler race in universal mode.
 +      test "$am__universal" = false || continue
 +      ;;
 +    nosideeffect)
 +      # after this tag, mechanisms are not by side-effect, so they'll
 +      # only be used when explicitly requested
 +      if test "x$enable_dependency_tracking" = xyes; then
 +      continue
 +      else
 +      break
 +      fi
 +      ;;
 +    msvisualcpp | msvcmsys)
 +      # This compiler won't grok `-c -o', but also, the minuso test has
 +      # not run yet.  These depmodes are late enough in the game, and
 +      # so weak that their functioning should not be impacted.
 +      am__obj=conftest.${OBJEXT-o}
 +      am__minus_obj=
 +      ;;
 +    none) break ;;
 +    esac
 +    if depmode=$depmode \
 +       source=sub/conftest.c object=$am__obj \
 +       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
 +       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
 +         >/dev/null 2>conftest.err &&
 +       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
 +       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
 +      # icc doesn't choke on unknown options, it will just issue warnings
 +      # or remarks (even with -Werror).  So we grep stderr for any message
 +      # that says an option was ignored or not supported.
 +      # When given -MP, icc 7.0 and 7.1 complain thusly:
 +      #   icc: Command line warning: ignoring option '-M'; no argument required
 +      # The diagnosis changed in icc 8.0:
 +      #   icc: Command line remark: option '-MP' not supported
 +      if (grep 'ignoring option' conftest.err ||
 +          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
 +        am_cv_CXX_dependencies_compiler_type=$depmode
 +        break
 +      fi
 +    fi
 +  done
 +
 +  cd ..
 +  rm -rf conftest.dir
 +else
 +  am_cv_CXX_dependencies_compiler_type=none
 +fi
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
 +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 +
 + if
 +  test "x$enable_dependency_tracking" != xno \
 +  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
 +  am__fastdepCXX_TRUE=
 +  am__fastdepCXX_FALSE='#'
 +else
 +  am__fastdepCXX_TRUE='#'
 +  am__fastdepCXX_FALSE=
 +fi
 +
 +
 +
 +ac_ext=cpp
 +ac_cpp='$CXXCPP $CPPFLAGS'
 +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 +if test -z "$CXX"; then
 +  if test -n "$CCC"; then
 +    CXX=$CCC
 +  else
 +    if test -n "$ac_tool_prefix"; then
 +  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
 +  do
 +    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 +set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
 +if test "${ac_cv_prog_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -n "$CXX"; then
 +  ac_cv_prog_CXX="$CXX" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
 +    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
 +CXX=$ac_cv_prog_CXX
 +if test -n "$CXX"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
 +$as_echo "$CXX" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +    test -n "$CXX" && break
 +  done
 +fi
 +if test -z "$CXX"; then
 +  ac_ct_CXX=$CXX
 +  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
 +do
 +  # Extract the first word of "$ac_prog", so it can be a program name with args.
 +set dummy $ac_prog; ac_word=$2
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 +$as_echo_n "checking for $ac_word... " >&6; }
 +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -n "$ac_ct_CXX"; then
 +  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
 +else
 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    for ac_exec_ext in '' $ac_executable_extensions; do
 +  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
 +    ac_cv_prog_ac_ct_CXX="$ac_prog"
 +    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
 +    break 2
 +  fi
 +done
 +  done
 +IFS=$as_save_IFS
 +
 +fi
 +fi
 +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
 +if test -n "$ac_ct_CXX"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
 +$as_echo "$ac_ct_CXX" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +
 +
 +  test -n "$ac_ct_CXX" && break
 +done
 +
 +  if test "x$ac_ct_CXX" = x; then
 +    CXX="g++"
 +  else
 +    case $cross_compiling:$ac_tool_warned in
 +yes:)
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 +ac_tool_warned=yes ;;
 +esac
 +    CXX=$ac_ct_CXX
 +  fi
 +fi
 +
 +  fi
 +fi
 +# Provide some information about the compiler.
 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
 +set X $ac_compile
 +ac_compiler=$2
 +for ac_option in --version -v -V -qversion; do
 +  { { ac_try="$ac_compiler $ac_option >&5"
 +case "(($ac_try" in
 +  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
 +  *) ac_try_echo=$ac_try;;
 +esac
 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
 +$as_echo "$ac_try_echo"; } >&5
 +  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
 +  ac_status=$?
 +  if test -s conftest.err; then
 +    sed '10a\
 +... rest of stderr output deleted ...
 +         10q' conftest.err >conftest.er1
 +    cat conftest.er1 >&5
 +  fi
 +  rm -f conftest.er1 conftest.err
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; }
 +done
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
 +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +#ifndef __GNUC__
 +       choke me
 +#endif
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_compiler_gnu=yes
 +else
 +  ac_compiler_gnu=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
 +if test $ac_compiler_gnu = yes; then
 +  GXX=yes
 +else
 +  GXX=
 +fi
 +ac_test_CXXFLAGS=${CXXFLAGS+set}
 +ac_save_CXXFLAGS=$CXXFLAGS
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 +$as_echo_n "checking whether $CXX accepts -g... " >&6; }
 +if test "${ac_cv_prog_cxx_g+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
 +   ac_cxx_werror_flag=yes
 +   ac_cv_prog_cxx_g=no
 +   CXXFLAGS="-g"
 +   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_cv_prog_cxx_g=yes
 +else
 +  CXXFLAGS=""
 +      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +
 +else
 +  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 +       CXXFLAGS="-g"
 +       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_compile "$LINENO"; then :
 +  ac_cv_prog_cxx_g=yes
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +fi
 +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 +   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
 +$as_echo "$ac_cv_prog_cxx_g" >&6; }
 +if test "$ac_test_CXXFLAGS" = set; then
 +  CXXFLAGS=$ac_save_CXXFLAGS
 +elif test $ac_cv_prog_cxx_g = yes; then
 +  if test "$GXX" = yes; then
 +    CXXFLAGS="-g -O2"
 +  else
 +    CXXFLAGS="-g"
 +  fi
 +else
 +  if test "$GXX" = yes; then
 +    CXXFLAGS="-O2"
 +  else
 +    CXXFLAGS=
 +  fi
 +fi
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +depcc="$CXX"  am_compiler_list=
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 +$as_echo_n "checking dependency style of $depcc... " >&6; }
 +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
 +  # We make a subdir and do the tests there.  Otherwise we can end up
 +  # making bogus files that we don't know about and never remove.  For
 +  # instance it was reported that on HP-UX the gcc test will end up
 +  # making a dummy file named `D' -- because `-MD' means `put the output
 +  # in D'.
 +  mkdir conftest.dir
 +  # Copy depcomp to subdir because otherwise we won't find it if we're
 +  # using a relative directory.
 +  cp "$am_depcomp" conftest.dir
 +  cd conftest.dir
 +  # We will build objects and dependencies in a subdirectory because
 +  # it helps to detect inapplicable dependency modes.  For instance
 +  # both Tru64's cc and ICC support -MD to output dependencies as a
 +  # side effect of compilation, but ICC will put the dependencies in
 +  # the current directory while Tru64 will put them in the object
 +  # directory.
 +  mkdir sub
 +
 +  am_cv_CXX_dependencies_compiler_type=none
 +  if test "$am_compiler_list" = ""; then
 +     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
 +  fi
 +  am__universal=false
 +  case " $depcc " in #(
 +     *\ -arch\ *\ -arch\ *) am__universal=true ;;
 +     esac
 +
 +  for depmode in $am_compiler_list; do
 +    # Setup a source with many dependencies, because some compilers
 +    # like to wrap large dependency lists on column 80 (with \), and
 +    # we should not choose a depcomp mode which is confused by this.
 +    #
 +    # We need to recreate these files for each test, as the compiler may
 +    # overwrite some of them when testing with obscure command lines.
 +    # This happens at least with the AIX C compiler.
 +    : > sub/conftest.c
 +    for i in 1 2 3 4 5 6; do
 +      echo '#include "conftst'$i'.h"' >> sub/conftest.c
 +      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
 +      # Solaris 8's {/usr,}/bin/sh.
 +      touch sub/conftst$i.h
 +    done
 +    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 +
 +    # We check with `-c' and `-o' for the sake of the "dashmstdout"
 +    # mode.  It turns out that the SunPro C++ compiler does not properly
 +    # handle `-M -o', and we need to detect this.  Also, some Intel
 +    # versions had trouble with output in subdirs
 +    am__obj=sub/conftest.${OBJEXT-o}
 +    am__minus_obj="-o $am__obj"
 +    case $depmode in
 +    gcc)
 +      # This depmode causes a compiler race in universal mode.
 +      test "$am__universal" = false || continue
 +      ;;
 +    nosideeffect)
 +      # after this tag, mechanisms are not by side-effect, so they'll
 +      # only be used when explicitly requested
 +      if test "x$enable_dependency_tracking" = xyes; then
 +      continue
 +      else
 +      break
 +      fi
 +      ;;
 +    msvisualcpp | msvcmsys)
 +      # This compiler won't grok `-c -o', but also, the minuso test has
 +      # not run yet.  These depmodes are late enough in the game, and
 +      # so weak that their functioning should not be impacted.
 +      am__obj=conftest.${OBJEXT-o}
 +      am__minus_obj=
 +      ;;
 +    none) break ;;
 +    esac
 +    if depmode=$depmode \
 +       source=sub/conftest.c object=$am__obj \
 +       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
 +       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
 +         >/dev/null 2>conftest.err &&
 +       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
 +       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
 +       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
 +      # icc doesn't choke on unknown options, it will just issue warnings
 +      # or remarks (even with -Werror).  So we grep stderr for any message
 +      # that says an option was ignored or not supported.
 +      # When given -MP, icc 7.0 and 7.1 complain thusly:
 +      #   icc: Command line warning: ignoring option '-M'; no argument required
 +      # The diagnosis changed in icc 8.0:
 +      #   icc: Command line remark: option '-MP' not supported
 +      if (grep 'ignoring option' conftest.err ||
 +          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
 +        am_cv_CXX_dependencies_compiler_type=$depmode
 +        break
 +      fi
 +    fi
 +  done
 +
 +  cd ..
 +  rm -rf conftest.dir
 +else
 +  am_cv_CXX_dependencies_compiler_type=none
 +fi
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
 +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 +
 + if
 +  test "x$enable_dependency_tracking" != xno \
 +  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
 +  am__fastdepCXX_TRUE=
 +  am__fastdepCXX_FALSE='#'
 +else
 +  am__fastdepCXX_TRUE='#'
 +  am__fastdepCXX_FALSE=
 +fi
 +
 +
 +if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 +    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
 +    (test "X$CXX" != "Xg++"))) ; then
 +  ac_ext=cpp
 +ac_cpp='$CXXCPP $CPPFLAGS'
 +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
 +if test -z "$CXXCPP"; then
 +  if test "${ac_cv_prog_CXXCPP+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +      # Double quotes because CXXCPP needs to be expanded
 +    for CXXCPP in "$CXX -E" "/lib/cpp"
 +    do
 +      ac_preproc_ok=false
 +for ac_cxx_preproc_warn_flag in '' yes
 +do
 +  # Use a header file that comes with gcc, so configuring glibc
 +  # with a fresh cross-compiler works.
 +  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
 +  # <limits.h> exists even on freestanding compilers.
 +  # On the NeXT, cc -E runs the code through the compiler's parser,
 +  # not just through cpp. "Syntax error" is here to catch this case.
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +#ifdef __STDC__
 +# include <limits.h>
 +#else
 +# include <assert.h>
 +#endif
 +                   Syntax error
 +_ACEOF
 +if ac_fn_cxx_try_cpp "$LINENO"; then :
 +
 +else
 +  # Broken: fails on valid input.
 +continue
 +fi
 +rm -f conftest.err conftest.i conftest.$ac_ext
 +
 +  # OK, works on sane cases.  Now check whether nonexistent headers
 +  # can be detected and how.
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +#include <ac_nonexistent.h>
 +_ACEOF
 +if ac_fn_cxx_try_cpp "$LINENO"; then :
 +  # Broken: success on invalid input.
 +continue
 +else
 +  # Passes both tests.
 +ac_preproc_ok=:
 +break
 +fi
 +rm -f conftest.err conftest.i conftest.$ac_ext
 +
 +done
 +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 +rm -f conftest.i conftest.err conftest.$ac_ext
 +if $ac_preproc_ok; then :
 +  break
 +fi
 +
 +    done
 +    ac_cv_prog_CXXCPP=$CXXCPP
 +
 +fi
 +  CXXCPP=$ac_cv_prog_CXXCPP
 +else
 +  ac_cv_prog_CXXCPP=$CXXCPP
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
 +$as_echo "$CXXCPP" >&6; }
 +ac_preproc_ok=false
 +for ac_cxx_preproc_warn_flag in '' yes
 +do
 +  # Use a header file that comes with gcc, so configuring glibc
 +  # with a fresh cross-compiler works.
 +  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
 +  # <limits.h> exists even on freestanding compilers.
 +  # On the NeXT, cc -E runs the code through the compiler's parser,
 +  # not just through cpp. "Syntax error" is here to catch this case.
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +#ifdef __STDC__
 +# include <limits.h>
 +#else
 +# include <assert.h>
 +#endif
 +                   Syntax error
 +_ACEOF
 +if ac_fn_cxx_try_cpp "$LINENO"; then :
 +
 +else
 +  # Broken: fails on valid input.
 +continue
 +fi
 +rm -f conftest.err conftest.i conftest.$ac_ext
 +
 +  # OK, works on sane cases.  Now check whether nonexistent headers
 +  # can be detected and how.
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +#include <ac_nonexistent.h>
 +_ACEOF
 +if ac_fn_cxx_try_cpp "$LINENO"; then :
 +  # Broken: success on invalid input.
 +continue
 +else
 +  # Passes both tests.
 +ac_preproc_ok=:
 +break
 +fi
 +rm -f conftest.err conftest.i conftest.$ac_ext
 +
 +done
 +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 +rm -f conftest.i conftest.err conftest.$ac_ext
 +if $ac_preproc_ok; then :
 +
 +else
 +  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 +_lt_caught_CXX_error=yes; }
 +fi
 +
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +else
 +  _lt_caught_CXX_error=yes
 +fi
 +
 +
 +
 +
 +ac_ext=cpp
 +ac_cpp='$CXXCPP $CPPFLAGS'
 +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 +
 +archive_cmds_need_lc_CXX=no
 +allow_undefined_flag_CXX=
 +always_export_symbols_CXX=no
 +archive_expsym_cmds_CXX=
 +compiler_needs_object_CXX=no
 +export_dynamic_flag_spec_CXX=
 +hardcode_direct_CXX=no
 +hardcode_direct_absolute_CXX=no
 +hardcode_libdir_flag_spec_CXX=
 +hardcode_libdir_flag_spec_ld_CXX=
 +hardcode_libdir_separator_CXX=
 +hardcode_minus_L_CXX=no
 +hardcode_shlibpath_var_CXX=unsupported
 +hardcode_automatic_CXX=no
 +inherit_rpath_CXX=no
 +module_cmds_CXX=
 +module_expsym_cmds_CXX=
 +link_all_deplibs_CXX=unknown
 +old_archive_cmds_CXX=$old_archive_cmds
 +no_undefined_flag_CXX=
 +whole_archive_flag_spec_CXX=
 +enable_shared_with_static_runtimes_CXX=no
 +
 +# Source file extension for C++ test sources.
 +ac_ext=cpp
 +
 +# Object file extension for compiled C++ test sources.
 +objext=o
 +objext_CXX=$objext
 +
 +# No sense in running all these tests if we already determined that
 +# the CXX compiler isn't working.  Some variables (like enable_shared)
 +# are currently assumed to apply to all compilers on this platform,
 +# and will be corrupted by setting them based on a non-working compiler.
 +if test "$_lt_caught_CXX_error" != yes; then
 +  # Code to be used in simple compile tests
 +  lt_simple_compile_test_code="int some_variable = 0;"
 +
 +  # Code to be used in simple link tests
 +  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
 +
 +  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 +
 +
 +
 +
 +
 +
 +# If no C compiler was specified, use CC.
 +LTCC=${LTCC-"$CC"}
 +
 +# If no C compiler flags were specified, use CFLAGS.
 +LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 +
 +# Allow CC to be a program name with arguments.
 +compiler=$CC
 +
 +
 +  # save warnings/boilerplate of simple test code
 +  ac_outfile=conftest.$ac_objext
 +echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 +_lt_compiler_boilerplate=`cat conftest.err`
 +$RM conftest*
 +
 +  ac_outfile=conftest.$ac_objext
 +echo "$lt_simple_link_test_code" >conftest.$ac_ext
 +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 +_lt_linker_boilerplate=`cat conftest.err`
 +$RM -r conftest*
 +
 +
 +  # Allow CC to be a program name with arguments.
 +  lt_save_CC=$CC
 +  lt_save_LD=$LD
 +  lt_save_GCC=$GCC
 +  GCC=$GXX
 +  lt_save_with_gnu_ld=$with_gnu_ld
 +  lt_save_path_LD=$lt_cv_path_LD
 +  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
 +    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
 +  else
 +    $as_unset lt_cv_prog_gnu_ld
 +  fi
 +  if test -n "${lt_cv_path_LDCXX+set}"; then
 +    lt_cv_path_LD=$lt_cv_path_LDCXX
 +  else
 +    $as_unset lt_cv_path_LD
 +  fi
 +  test -z "${LDCXX+set}" || LD=$LDCXX
 +  CC=${CXX-"c++"}
 +  compiler=$CC
 +  compiler_CXX=$CC
 +  for cc_temp in $compiler""; do
 +  case $cc_temp in
 +    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
 +    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
 +    \-*) ;;
 +    *) break;;
 +  esac
 +done
 +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 +
 +
 +  if test -n "$compiler"; then
 +    # We don't want -fno-exception when compiling C++ code, so set the
 +    # no_builtin_flag separately
 +    if test "$GXX" = yes; then
 +      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
 +    else
 +      lt_prog_compiler_no_builtin_flag_CXX=
 +    fi
 +
 +    if test "$GXX" = yes; then
 +      # Set up default GNU C++ configuration
 +
 +
 +
 +# Check whether --with-gnu-ld was given.
 +if test "${with_gnu_ld+set}" = set; then :
 +  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 +else
 +  with_gnu_ld=no
 +fi
 +
 +ac_prog=ld
 +if test "$GCC" = yes; then
 +  # Check if gcc -print-prog-name=ld gives a path.
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
 +$as_echo_n "checking for ld used by $CC... " >&6; }
 +  case $host in
 +  *-*-mingw*)
 +    # gcc leaves a trailing carriage return which upsets mingw
 +    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
 +  *)
 +    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
 +  esac
 +  case $ac_prog in
 +    # Accept absolute paths.
 +    [\\/]* | ?:[\\/]*)
 +      re_direlt='/[^/][^/]*/\.\./'
 +      # Canonicalize the pathname of ld
 +      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
 +      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
 +      ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
 +      done
 +      test -z "$LD" && LD="$ac_prog"
 +      ;;
 +  "")
 +    # If it fails, then pretend we aren't using GCC.
 +    ac_prog=ld
 +    ;;
 +  *)
 +    # If it is relative, then search for the first ld in PATH.
 +    with_gnu_ld=unknown
 +    ;;
 +  esac
 +elif test "$with_gnu_ld" = yes; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
 +$as_echo_n "checking for GNU ld... " >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 +$as_echo_n "checking for non-GNU ld... " >&6; }
 +fi
 +if test "${lt_cv_path_LD+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  if test -z "$LD"; then
 +  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
 +  for ac_dir in $PATH; do
 +    IFS="$lt_save_ifs"
 +    test -z "$ac_dir" && ac_dir=.
 +    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
 +      lt_cv_path_LD="$ac_dir/$ac_prog"
 +      # Check to see if the program is GNU ld.  I'd rather use --version,
 +      # but apparently some variants of GNU ld only accept -v.
 +      # Break only if it was the GNU/non-GNU ld that we prefer.
 +      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
 +      *GNU* | *'with BFD'*)
 +      test "$with_gnu_ld" != no && break
 +      ;;
 +      *)
 +      test "$with_gnu_ld" != yes && break
 +      ;;
 +      esac
 +    fi
 +  done
 +  IFS="$lt_save_ifs"
 +else
 +  lt_cv_path_LD="$LD" # Let the user override the test with a path.
 +fi
 +fi
 +
 +LD="$lt_cv_path_LD"
 +if test -n "$LD"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
 +$as_echo "$LD" >&6; }
 +else
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 +$as_echo "no" >&6; }
 +fi
 +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
 +if test "${lt_cv_prog_gnu_ld+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  # I'd rather use --version here, but apparently some GNU lds only accept -v.
 +case `$LD -v 2>&1 </dev/null` in
 +*GNU* | *'with BFD'*)
 +  lt_cv_prog_gnu_ld=yes
 +  ;;
 +*)
 +  lt_cv_prog_gnu_ld=no
 +  ;;
 +esac
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
 +$as_echo "$lt_cv_prog_gnu_ld" >&6; }
 +with_gnu_ld=$lt_cv_prog_gnu_ld
 +
 +
 +
 +
 +
 +
 +
 +      # Check if GNU C++ uses GNU ld as the underlying linker, since the
 +      # archiving commands below assume that GNU ld is being used.
 +      if test "$with_gnu_ld" = yes; then
 +        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +        archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 +
 +        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 +        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 +
 +        # If archive_cmds runs LD, not CC, wlarc should be empty
 +        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
 +        #     investigate it a little bit more. (MM)
 +        wlarc='${wl}'
 +
 +        # ancient GNU ld didn't support --whole-archive et. al.
 +        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
 +        $GREP 'no-whole-archive' > /dev/null; then
 +          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 +        else
 +          whole_archive_flag_spec_CXX=
 +        fi
 +      else
 +        with_gnu_ld=no
 +        wlarc=
 +
 +        # A generic and very simple default shared library creation
 +        # command for GNU C++ for the case where it uses the native
 +        # linker, instead of GNU ld.  If possible, this setting should
 +        # overridden to take advantage of the native linker features on
 +        # the platform it is being used on.
 +        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
 +      fi
 +
 +      # Commands to make compiler produce verbose output that lists
 +      # what "hidden" libraries, object files and flags are used when
 +      # linking a shared library.
 +      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 +
 +    else
 +      GXX=no
 +      with_gnu_ld=no
 +      wlarc=
 +    fi
 +
 +    # PORTME: fill in a description of your system's C++ link characteristics
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 +    ld_shlibs_CXX=yes
 +    case $host_os in
 +      aix3*)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +        ;;
 +      aix[4-9]*)
 +        if test "$host_cpu" = ia64; then
 +          # On IA64, the linker does run time linking by default, so we don't
 +          # have to do anything special.
 +          aix_use_runtimelinking=no
 +          exp_sym_flag='-Bexport'
 +          no_entry_flag=""
 +        else
 +          aix_use_runtimelinking=no
 +
 +          # Test if we are trying to use run time linking or normal
 +          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
 +          # need to do runtime linking.
 +          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 +          for ld_flag in $LDFLAGS; do
 +            case $ld_flag in
 +            *-brtl*)
 +              aix_use_runtimelinking=yes
 +              break
 +              ;;
 +            esac
 +          done
 +          ;;
 +          esac
 +
 +          exp_sym_flag='-bexport'
 +          no_entry_flag='-bnoentry'
 +        fi
 +
 +        # When large executables or shared objects are built, AIX ld can
 +        # have problems creating the table of contents.  If linking a library
 +        # or program results in "error TOC overflow" add -mminimal-toc to
 +        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
 +        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 +
 +        archive_cmds_CXX=''
 +        hardcode_direct_CXX=yes
 +        hardcode_direct_absolute_CXX=yes
 +        hardcode_libdir_separator_CXX=':'
 +        link_all_deplibs_CXX=yes
 +        file_list_spec_CXX='${wl}-f,'
 +
 +        if test "$GXX" = yes; then
 +          case $host_os in aix4.[012]|aix4.[012].*)
 +          # We only want to do this on AIX 4.2 and lower, the check
 +          # below for broken collect2 doesn't work under 4.3+
 +        collect2name=`${CC} -print-prog-name=collect2`
 +        if test -f "$collect2name" &&
 +           strings "$collect2name" | $GREP resolve_lib_name >/dev/null
 +        then
 +          # We have reworked collect2
 +          :
 +        else
 +          # We have old collect2
 +          hardcode_direct_CXX=unsupported
 +          # It fails to find uninstalled libraries when the uninstalled
 +          # path is not listed in the libpath.  Setting hardcode_minus_L
 +          # to unsupported forces relinking
 +          hardcode_minus_L_CXX=yes
 +          hardcode_libdir_flag_spec_CXX='-L$libdir'
 +          hardcode_libdir_separator_CXX=
 +        fi
 +          esac
 +          shared_flag='-shared'
 +        if test "$aix_use_runtimelinking" = yes; then
 +          shared_flag="$shared_flag "'${wl}-G'
 +        fi
 +        else
 +          # not using gcc
 +          if test "$host_cpu" = ia64; then
 +        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 +        # chokes on -Wl,-G. The following line is correct:
 +        shared_flag='-G'
 +          else
 +          if test "$aix_use_runtimelinking" = yes; then
 +            shared_flag='${wl}-G'
 +          else
 +            shared_flag='${wl}-bM:SRE'
 +          fi
 +          fi
 +        fi
 +
 +        export_dynamic_flag_spec_CXX='${wl}-bexpall'
 +        # It seems that -bexpall does not export symbols beginning with
 +        # underscore (_), so it is better to generate a list of symbols to
 +      # export.
 +        always_export_symbols_CXX=yes
 +        if test "$aix_use_runtimelinking" = yes; then
 +          # Warning - without using the other runtime loading flags (-brtl),
 +          # -berok will link without error, but may produce a broken library.
 +          allow_undefined_flag_CXX='-berok'
 +          # Determine the default libpath from the value encoded in an empty
 +          # executable.
 +          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_link "$LINENO"; then :
 +
 +lt_aix_libpath_sed='
 +    /Import File Strings/,/^$/ {
 +      /^0/ {
 +          s/^0  *\(.*\)$/\1/
 +          p
 +      }
 +    }'
 +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 +# Check for a 64-bit object if we didn't find anything.
 +if test -z "$aix_libpath"; then
 +  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 +fi
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 +
 +          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 +
 +          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
 +        else
 +          if test "$host_cpu" = ia64; then
 +          hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
 +          allow_undefined_flag_CXX="-z nodefs"
 +          archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
 +          else
 +          # Determine the default libpath from the value encoded in an
 +          # empty executable.
 +          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_link "$LINENO"; then :
 +
 +lt_aix_libpath_sed='
 +    /Import File Strings/,/^$/ {
 +      /^0/ {
 +          s/^0  *\(.*\)$/\1/
 +          p
 +      }
 +    }'
 +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 +# Check for a 64-bit object if we didn't find anything.
 +if test -z "$aix_libpath"; then
 +  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 +fi
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 +
 +          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 +          # Warning - without using the other run time loading flags,
 +          # -berok will link without error, but may produce a broken library.
 +          no_undefined_flag_CXX=' ${wl}-bernotok'
 +          allow_undefined_flag_CXX=' ${wl}-berok'
 +          # Exported symbols can be pulled into shared objects from archives
 +          whole_archive_flag_spec_CXX='$convenience'
 +          archive_cmds_need_lc_CXX=yes
 +          # This is similar to how AIX traditionally builds its shared
 +          # libraries.
 +          archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
 +          fi
 +        fi
 +        ;;
 +
 +      beos*)
 +      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
 +        allow_undefined_flag_CXX=unsupported
 +        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
 +        # support --undefined.  This deserves some investigation.  FIXME
 +        archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +      else
 +        ld_shlibs_CXX=no
 +      fi
 +      ;;
 +
 +      chorus*)
 +        case $cc_basename in
 +          *)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +        ;;
 +        esac
 +        ;;
 +
 +      cygwin* | mingw* | pw32* | cegcc*)
 +        # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
 +        # as there is no search path for DLLs.
 +        hardcode_libdir_flag_spec_CXX='-L$libdir'
 +        allow_undefined_flag_CXX=unsupported
 +        always_export_symbols_CXX=no
 +        enable_shared_with_static_runtimes_CXX=yes
 +
 +        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
 +          archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 +          # If the export-symbols file already is a .def file (1st line
 +          # is EXPORTS), use it as is; otherwise, prepend...
 +          archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
 +          cp $export_symbols $output_objdir/$soname.def;
 +          else
 +          echo EXPORTS > $output_objdir/$soname.def;
 +          cat $export_symbols >> $output_objdir/$soname.def;
 +          fi~
 +          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
 +        else
 +          ld_shlibs_CXX=no
 +        fi
 +        ;;
 +      darwin* | rhapsody*)
 +
 +
 +  archive_cmds_need_lc_CXX=no
 +  hardcode_direct_CXX=no
 +  hardcode_automatic_CXX=yes
 +  hardcode_shlibpath_var_CXX=unsupported
 +  whole_archive_flag_spec_CXX=''
 +  link_all_deplibs_CXX=yes
 +  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
 +  case $cc_basename in
 +     ifort*) _lt_dar_can_shared=yes ;;
 +     *) _lt_dar_can_shared=$GCC ;;
 +  esac
 +  if test "$_lt_dar_can_shared" = "yes"; then
 +    output_verbose_link_cmd=echo
 +    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
 +    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
 +    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
 +    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
 +       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
 +      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
 +      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
 +    fi
 +
 +  else
 +  ld_shlibs_CXX=no
 +  fi
 +
 +      ;;
 +
 +      dgux*)
 +        case $cc_basename in
 +          ec++*)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          ghcx*)
 +          # Green Hills C++ Compiler
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          *)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +        esac
 +        ;;
 +
 +      freebsd[12]*)
 +        # C++ shared libraries reported to be fairly broken before
 +      # switch to ELF
 +        ld_shlibs_CXX=no
 +        ;;
 +
 +      freebsd-elf*)
 +        archive_cmds_need_lc_CXX=no
 +        ;;
 +
 +      freebsd* | dragonfly*)
 +        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
 +        # conventions
 +        ld_shlibs_CXX=yes
 +        ;;
 +
 +      gnu*)
 +        ;;
 +
 +      hpux9*)
 +        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
 +        hardcode_libdir_separator_CXX=:
 +        export_dynamic_flag_spec_CXX='${wl}-E'
 +        hardcode_direct_CXX=yes
 +        hardcode_minus_L_CXX=yes # Not in the search PATH,
 +                                           # but as the default
 +                                           # location of the library.
 +
 +        case $cc_basename in
 +          CC*)
 +            # FIXME: insert proper C++ library support
 +            ld_shlibs_CXX=no
 +            ;;
 +          aCC*)
 +            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
 +            # Commands to make compiler produce verbose output that lists
 +            # what "hidden" libraries, object files and flags are used when
 +            # linking a shared library.
 +            #
 +            # There doesn't appear to be a way to prevent this compiler from
 +            # explicitly linking system object files so we need to strip them
 +            # from the output so that they don't get included in the library
 +            # dependencies.
 +            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 +            ;;
 +          *)
 +            if test "$GXX" = yes; then
 +              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
 +            else
 +              # FIXME: insert proper C++ library support
 +              ld_shlibs_CXX=no
 +            fi
 +            ;;
 +        esac
 +        ;;
 +
 +      hpux10*|hpux11*)
 +        if test $with_gnu_ld = no; then
 +        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
 +        hardcode_libdir_separator_CXX=:
 +
 +          case $host_cpu in
 +            hppa*64*|ia64*)
 +              ;;
 +            *)
 +            export_dynamic_flag_spec_CXX='${wl}-E'
 +              ;;
 +          esac
 +        fi
 +        case $host_cpu in
 +          hppa*64*|ia64*)
 +            hardcode_direct_CXX=no
 +            hardcode_shlibpath_var_CXX=no
 +            ;;
 +          *)
 +            hardcode_direct_CXX=yes
 +            hardcode_direct_absolute_CXX=yes
 +            hardcode_minus_L_CXX=yes # Not in the search PATH,
 +                                               # but as the default
 +                                               # location of the library.
 +            ;;
 +        esac
 +
 +        case $cc_basename in
 +          CC*)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          aCC*)
 +          case $host_cpu in
 +            hppa*64*)
 +              archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +              ;;
 +            ia64*)
 +              archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +              ;;
 +            *)
 +              archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +              ;;
 +          esac
 +          # Commands to make compiler produce verbose output that lists
 +          # what "hidden" libraries, object files and flags are used when
 +          # linking a shared library.
 +          #
 +          # There doesn't appear to be a way to prevent this compiler from
 +          # explicitly linking system object files so we need to strip them
 +          # from the output so that they don't get included in the library
 +          # dependencies.
 +          output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 +          ;;
 +          *)
 +          if test "$GXX" = yes; then
 +            if test $with_gnu_ld = no; then
 +              case $host_cpu in
 +                hppa*64*)
 +                  archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +                  ;;
 +                ia64*)
 +                  archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +                  ;;
 +                *)
 +                  archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +                  ;;
 +              esac
 +            fi
 +          else
 +            # FIXME: insert proper C++ library support
 +            ld_shlibs_CXX=no
 +          fi
 +          ;;
 +        esac
 +        ;;
 +
 +      interix[3-9]*)
 +      hardcode_direct_CXX=no
 +      hardcode_shlibpath_var_CXX=no
 +      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 +      export_dynamic_flag_spec_CXX='${wl}-E'
 +      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
 +      # Instead, shared libraries are loaded at an image base (0x10000000 by
 +      # default) and relocated if they conflict, which is a slow very memory
 +      # consuming and fragmenting process.  To avoid this, we pick a random,
 +      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
 +      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
 +      archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 +      archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
 +      ;;
 +      irix5* | irix6*)
 +        case $cc_basename in
 +          CC*)
 +          # SGI C++
 +          archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 +
 +          # Archives containing C++ object files must be created using
 +          # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
 +          # necessary to make sure instantiated templates are included
 +          # in the archive.
 +          old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
 +          ;;
 +          *)
 +          if test "$GXX" = yes; then
 +            if test "$with_gnu_ld" = no; then
 +              archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 +            else
 +              archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
 +            fi
 +          fi
 +          link_all_deplibs_CXX=yes
 +          ;;
 +        esac
 +        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 +        hardcode_libdir_separator_CXX=:
 +        inherit_rpath_CXX=yes
 +        ;;
 +
 +      linux* | k*bsd*-gnu | kopensolaris*-gnu)
 +        case $cc_basename in
 +          KCC*)
 +          # Kuck and Associates, Inc. (KAI) C++ Compiler
 +
 +          # KCC will only create a shared library if the output file
 +          # ends with ".so" (or ".sl" for HP-UX), so rename the library
 +          # to its proper name (with version) after linking.
 +          archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 +          archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
 +          # Commands to make compiler produce verbose output that lists
 +          # what "hidden" libraries, object files and flags are used when
 +          # linking a shared library.
 +          #
 +          # There doesn't appear to be a way to prevent this compiler from
 +          # explicitly linking system object files so we need to strip them
 +          # from the output so that they don't get included in the library
 +          # dependencies.
 +          output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 +
 +          hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 +          export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 +
 +          # Archives containing C++ object files must be created using
 +          # "CC -Bstatic", where "CC" is the KAI C++ compiler.
 +          old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
 +          ;;
 +        icpc* | ecpc* )
 +          # Intel C++
 +          with_gnu_ld=yes
 +          # version 8.0 and above of icpc choke on multiply defined symbols
 +          # if we add $predep_objects and $postdep_objects, however 7.1 and
 +          # earlier do not add the objects themselves.
 +          case `$CC -V 2>&1` in
 +            *"Version 7."*)
 +              archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +              archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 +              ;;
 +            *)  # Version 8.0 or newer
 +              tmp_idyn=
 +              case $host_cpu in
 +                ia64*) tmp_idyn=' -i_dynamic';;
 +              esac
 +              archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +              archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 +              ;;
 +          esac
 +          archive_cmds_need_lc_CXX=no
 +          hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 +          export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 +          whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 +          ;;
 +          pgCC* | pgcpp*)
 +            # Portland Group C++ compiler
 +          case `$CC -V` in
 +          *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
 +            prelink_cmds_CXX='tpldir=Template.dir~
 +              rm -rf $tpldir~
 +              $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
 +              compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
 +            old_archive_cmds_CXX='tpldir=Template.dir~
 +              rm -rf $tpldir~
 +              $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
 +              $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
 +              $RANLIB $oldlib'
 +            archive_cmds_CXX='tpldir=Template.dir~
 +              rm -rf $tpldir~
 +              $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
 +              $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 +            archive_expsym_cmds_CXX='tpldir=Template.dir~
 +              rm -rf $tpldir~
 +              $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
 +              $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 +            ;;
 +          *) # Version 6 will use weak symbols
 +            archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 +            archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 +            ;;
 +          esac
 +
 +          hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
 +          export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 +          whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 +            ;;
 +        cxx*)
 +          # Compaq C++
 +          archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +          archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 +
 +          runpath_var=LD_RUN_PATH
 +          hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 +          hardcode_libdir_separator_CXX=:
 +
 +          # Commands to make compiler produce verbose output that lists
 +          # what "hidden" libraries, object files and flags are used when
 +          # linking a shared library.
 +          #
 +          # There doesn't appear to be a way to prevent this compiler from
 +          # explicitly linking system object files so we need to strip them
 +          # from the output so that they don't get included in the library
 +          # dependencies.
 +          output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 +          ;;
 +        xl*)
 +          # IBM XL 8.0 on PPC, with GNU ld
 +          hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 +          export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 +          archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 +          if test "x$supports_anon_versioning" = xyes; then
 +            archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
 +              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 +              echo "local: *; };" >> $output_objdir/$libname.ver~
 +              $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 +          fi
 +          ;;
 +        *)
 +          case `$CC -V 2>&1 | sed 5q` in
 +          *Sun\ C*)
 +            # Sun C++ 5.9
 +            no_undefined_flag_CXX=' -zdefs'
 +            archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +            archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 +            hardcode_libdir_flag_spec_CXX='-R$libdir'
 +            whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 +            compiler_needs_object_CXX=yes
 +
 +            # Not sure whether something based on
 +            # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 +            # would be better.
 +            output_verbose_link_cmd='echo'
 +
 +            # Archives containing C++ object files must be created using
 +            # "CC -xar", where "CC" is the Sun C++ compiler.  This is
 +            # necessary to make sure instantiated templates are included
 +            # in the archive.
 +            old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
 +            ;;
 +          esac
 +          ;;
 +      esac
 +      ;;
 +
 +      lynxos*)
 +        # FIXME: insert proper C++ library support
 +      ld_shlibs_CXX=no
 +      ;;
 +
 +      m88k*)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +      ;;
 +
 +      mvs*)
 +        case $cc_basename in
 +          cxx*)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +        *)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +      esac
 +      ;;
 +
 +      netbsd*)
 +        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 +        archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
 +        wlarc=
 +        hardcode_libdir_flag_spec_CXX='-R$libdir'
 +        hardcode_direct_CXX=yes
 +        hardcode_shlibpath_var_CXX=no
 +      fi
 +      # Workaround some broken pre-1.5 toolchains
 +      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
 +      ;;
 +
 +      *nto* | *qnx*)
 +        ld_shlibs_CXX=yes
 +      ;;
 +
 +      openbsd2*)
 +        # C++ shared libraries are fairly broken
 +      ld_shlibs_CXX=no
 +      ;;
 +
 +      openbsd*)
 +      if test -f /usr/libexec/ld.so; then
 +        hardcode_direct_CXX=yes
 +        hardcode_shlibpath_var_CXX=no
 +        hardcode_direct_absolute_CXX=yes
 +        archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
 +        hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 +        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 +          archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
 +          export_dynamic_flag_spec_CXX='${wl}-E'
 +          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 +        fi
 +        output_verbose_link_cmd=echo
 +      else
 +        ld_shlibs_CXX=no
 +      fi
 +      ;;
 +
 +      osf3* | osf4* | osf5*)
 +        case $cc_basename in
 +          KCC*)
 +          # Kuck and Associates, Inc. (KAI) C++ Compiler
 +
 +          # KCC will only create a shared library if the output file
 +          # ends with ".so" (or ".sl" for HP-UX), so rename the library
 +          # to its proper name (with version) after linking.
 +          archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 +
 +          hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 +          hardcode_libdir_separator_CXX=:
 +
 +          # Archives containing C++ object files must be created using
 +          # the KAI C++ compiler.
 +          case $host in
 +            osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
 +            *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
 +          esac
 +          ;;
 +          RCC*)
 +          # Rational C++ 2.4.1
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          cxx*)
 +          case $host in
 +            osf3*)
 +              allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
 +              archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 +              hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 +              ;;
 +            *)
 +              allow_undefined_flag_CXX=' -expect_unresolved \*'
 +              archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 +              archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 +                echo "-hidden">> $lib.exp~
 +                $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
 +                $RM $lib.exp'
 +              hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 +              ;;
 +          esac
 +
 +          hardcode_libdir_separator_CXX=:
 +
 +          # Commands to make compiler produce verbose output that lists
 +          # what "hidden" libraries, object files and flags are used when
 +          # linking a shared library.
 +          #
 +          # There doesn't appear to be a way to prevent this compiler from
 +          # explicitly linking system object files so we need to strip them
 +          # from the output so that they don't get included in the library
 +          # dependencies.
 +          output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 +          ;;
 +        *)
 +          if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 +            allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
 +            case $host in
 +              osf3*)
 +                archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 +                ;;
 +              *)
 +                archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 +                ;;
 +            esac
 +
 +            hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 +            hardcode_libdir_separator_CXX=:
 +
 +            # Commands to make compiler produce verbose output that lists
 +            # what "hidden" libraries, object files and flags are used when
 +            # linking a shared library.
 +            output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 +
 +          else
 +            # FIXME: insert proper C++ library support
 +            ld_shlibs_CXX=no
 +          fi
 +          ;;
 +        esac
 +        ;;
 +
 +      psos*)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +        ;;
 +
 +      sunos4*)
 +        case $cc_basename in
 +          CC*)
 +          # Sun C++ 4.x
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          lcc*)
 +          # Lucid
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          *)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +        esac
 +        ;;
 +
 +      solaris*)
 +        case $cc_basename in
 +          CC*)
 +          # Sun C++ 4.2, 5.x and Centerline C++
 +            archive_cmds_need_lc_CXX=yes
 +          no_undefined_flag_CXX=' -zdefs'
 +          archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 +          archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 +            $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 +
 +          hardcode_libdir_flag_spec_CXX='-R$libdir'
 +          hardcode_shlibpath_var_CXX=no
 +          case $host_os in
 +            solaris2.[0-5] | solaris2.[0-5].*) ;;
 +            *)
 +              # The compiler driver will combine and reorder linker options,
 +              # but understands `-z linker_flag'.
 +              # Supported since Solaris 2.6 (maybe 2.5.1?)
 +              whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
 +              ;;
 +          esac
 +          link_all_deplibs_CXX=yes
 +
 +          output_verbose_link_cmd='echo'
 +
 +          # Archives containing C++ object files must be created using
 +          # "CC -xar", where "CC" is the Sun C++ compiler.  This is
 +          # necessary to make sure instantiated templates are included
 +          # in the archive.
 +          old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
 +          ;;
 +          gcx*)
 +          # Green Hills C++ Compiler
 +          archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 +
 +          # The C++ compiler must be used to create the archive.
 +          old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 +          ;;
 +          *)
 +          # GNU C++ compiler with Solaris linker
 +          if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 +            no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
 +            if $CC --version | $GREP -v '^2\.7' > /dev/null; then
 +              archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 +              archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 +                $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 +
 +              # Commands to make compiler produce verbose output that lists
 +              # what "hidden" libraries, object files and flags are used when
 +              # linking a shared library.
 +              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 +            else
 +              # g++ 2.7 appears to require `-G' NOT `-shared' on this
 +              # platform.
 +              archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 +              archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
 +                $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 +
 +              # Commands to make compiler produce verbose output that lists
 +              # what "hidden" libraries, object files and flags are used when
 +              # linking a shared library.
 +              output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 +            fi
 +
 +            hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
 +            case $host_os in
 +              solaris2.[0-5] | solaris2.[0-5].*) ;;
 +              *)
 +                whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 +                ;;
 +            esac
 +          fi
 +          ;;
 +        esac
 +        ;;
 +
 +    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
 +      no_undefined_flag_CXX='${wl}-z,text'
 +      archive_cmds_need_lc_CXX=no
 +      hardcode_shlibpath_var_CXX=no
 +      runpath_var='LD_RUN_PATH'
 +
 +      case $cc_basename in
 +        CC*)
 +        archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +        archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +        ;;
 +      *)
 +        archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +        archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +        ;;
 +      esac
 +      ;;
 +
 +      sysv5* | sco3.2v5* | sco5v6*)
 +      # Note: We can NOT use -z defs as we might desire, because we do not
 +      # link with -lc, and that would cause any symbols used from libc to
 +      # always be unresolved, which means just about no library would
 +      # ever link correctly.  If we're not using GNU ld we use -z text
 +      # though, which does catch some bad symbols but isn't as heavy-handed
 +      # as -z defs.
 +      no_undefined_flag_CXX='${wl}-z,text'
 +      allow_undefined_flag_CXX='${wl}-z,nodefs'
 +      archive_cmds_need_lc_CXX=no
 +      hardcode_shlibpath_var_CXX=no
 +      hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
 +      hardcode_libdir_separator_CXX=':'
 +      link_all_deplibs_CXX=yes
 +      export_dynamic_flag_spec_CXX='${wl}-Bexport'
 +      runpath_var='LD_RUN_PATH'
 +
 +      case $cc_basename in
 +          CC*)
 +          archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +          archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +          ;;
 +        *)
 +          archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +          archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 +          ;;
 +      esac
 +      ;;
 +
 +      tandem*)
 +        case $cc_basename in
 +          NCC*)
 +          # NonStop-UX NCC 3.20
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +          *)
 +          # FIXME: insert proper C++ library support
 +          ld_shlibs_CXX=no
 +          ;;
 +        esac
 +        ;;
 +
 +      vxworks*)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +        ;;
 +
 +      *)
 +        # FIXME: insert proper C++ library support
 +        ld_shlibs_CXX=no
 +        ;;
 +    esac
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 +$as_echo "$ld_shlibs_CXX" >&6; }
 +    test "$ld_shlibs_CXX" = no && can_build_shared=no
 +
 +    GCC_CXX="$GXX"
 +    LD_CXX="$LD"
 +
 +    ## CAVEAT EMPTOR:
 +    ## There is no encapsulation within the following macros, do not change
 +    ## the running order or otherwise move them around unless you know exactly
 +    ## what you are doing...
 +    # Dependencies to place before and after the object being linked:
 +predep_objects_CXX=
 +postdep_objects_CXX=
 +predeps_CXX=
 +postdeps_CXX=
 +compiler_lib_search_path_CXX=
 +
 +cat > conftest.$ac_ext <<_LT_EOF
 +class Foo
 +{
 +public:
 +  Foo (void) { a = 0; }
 +private:
 +  int a;
 +};
 +_LT_EOF
 +
 +if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 +  (eval $ac_compile) 2>&5
 +  ac_status=$?
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; }; then
 +  # Parse the compiler output and extract the necessary
 +  # objects, libraries and library flags.
 +
 +  # Sentinel used to keep track of whether or not we are before
 +  # the conftest object file.
 +  pre_test_object_deps_done=no
 +
 +  for p in `eval "$output_verbose_link_cmd"`; do
 +    case $p in
 +
 +    -L* | -R* | -l*)
 +       # Some compilers place space between "-{L,R}" and the path.
 +       # Remove the space.
 +       if test $p = "-L" ||
 +          test $p = "-R"; then
 +       prev=$p
 +       continue
 +       else
 +       prev=
 +       fi
 +
 +       if test "$pre_test_object_deps_done" = no; then
 +       case $p in
 +       -L* | -R*)
 +         # Internal compiler library paths should come after those
 +         # provided the user.  The postdeps already come after the
 +         # user supplied libs so there is no need to process them.
 +         if test -z "$compiler_lib_search_path_CXX"; then
 +           compiler_lib_search_path_CXX="${prev}${p}"
 +         else
 +           compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
 +         fi
 +         ;;
 +       # The "-l" case would never come before the object being
 +       # linked, so don't bother handling this case.
 +       esac
 +       else
 +       if test -z "$postdeps_CXX"; then
 +         postdeps_CXX="${prev}${p}"
 +       else
 +         postdeps_CXX="${postdeps_CXX} ${prev}${p}"
 +       fi
 +       fi
 +       ;;
 +
 +    *.$objext)
 +       # This assumes that the test object file only shows up
 +       # once in the compiler output.
 +       if test "$p" = "conftest.$objext"; then
 +       pre_test_object_deps_done=yes
 +       continue
 +       fi
 +
 +       if test "$pre_test_object_deps_done" = no; then
 +       if test -z "$predep_objects_CXX"; then
 +         predep_objects_CXX="$p"
 +       else
 +         predep_objects_CXX="$predep_objects_CXX $p"
 +       fi
 +       else
 +       if test -z "$postdep_objects_CXX"; then
 +         postdep_objects_CXX="$p"
 +       else
 +         postdep_objects_CXX="$postdep_objects_CXX $p"
 +       fi
 +       fi
 +       ;;
 +
 +    *) ;; # Ignore the rest.
 +
 +    esac
 +  done
 +
 +  # Clean up.
 +  rm -f a.out a.exe
 +else
 +  echo "libtool.m4: error: problem compiling CXX test program"
 +fi
 +
 +$RM -f confest.$objext
 +
 +# PORTME: override above test on systems where it is broken
 +case $host_os in
 +interix[3-9]*)
 +  # Interix 3.5 installs completely hosed .la files for C++, so rather than
 +  # hack all around it, let's just trust "g++" to DTRT.
 +  predep_objects_CXX=
 +  postdep_objects_CXX=
 +  postdeps_CXX=
 +  ;;
 +
 +linux*)
 +  case `$CC -V 2>&1 | sed 5q` in
 +  *Sun\ C*)
 +    # Sun C++ 5.9
 +
 +    # The more standards-conforming stlport4 library is
 +    # incompatible with the Cstd library. Avoid specifying
 +    # it if it's in CXXFLAGS. Ignore libCrun as
 +    # -library=stlport4 depends on it.
 +    case " $CXX $CXXFLAGS " in
 +    *" -library=stlport4 "*)
 +      solaris_use_stlport4=yes
 +      ;;
 +    esac
 +
 +    if test "$solaris_use_stlport4" != yes; then
 +      postdeps_CXX='-library=Cstd -library=Crun'
 +    fi
 +    ;;
 +  esac
 +  ;;
 +
 +solaris*)
 +  case $cc_basename in
 +  CC*)
 +    # The more standards-conforming stlport4 library is
 +    # incompatible with the Cstd library. Avoid specifying
 +    # it if it's in CXXFLAGS. Ignore libCrun as
 +    # -library=stlport4 depends on it.
 +    case " $CXX $CXXFLAGS " in
 +    *" -library=stlport4 "*)
 +      solaris_use_stlport4=yes
 +      ;;
 +    esac
 +
 +    # Adding this requires a known-good setup of shared libraries for
 +    # Sun compiler versions before 5.6, else PIC objects from an old
 +    # archive will be linked into the output, leading to subtle bugs.
 +    if test "$solaris_use_stlport4" != yes; then
 +      postdeps_CXX='-library=Cstd -library=Crun'
 +    fi
 +    ;;
 +  esac
 +  ;;
 +esac
 +
 +
 +case " $postdeps_CXX " in
 +*" -lc "*) archive_cmds_need_lc_CXX=no ;;
 +esac
 + compiler_lib_search_dirs_CXX=
 +if test -n "${compiler_lib_search_path_CXX}"; then
 + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
 +fi
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +    lt_prog_compiler_wl_CXX=
 +lt_prog_compiler_pic_CXX=
 +lt_prog_compiler_static_CXX=
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 +
 +  # C++ specific cases for pic, static, wl, etc.
 +  if test "$GXX" = yes; then
 +    lt_prog_compiler_wl_CXX='-Wl,'
 +    lt_prog_compiler_static_CXX='-static'
 +
 +    case $host_os in
 +    aix*)
 +      # All AIX code is PIC.
 +      if test "$host_cpu" = ia64; then
 +      # AIX 5 now supports IA64 processor
 +      lt_prog_compiler_static_CXX='-Bstatic'
 +      fi
 +      ;;
 +
 +    amigaos*)
 +      case $host_cpu in
 +      powerpc)
 +            # see comment about AmigaOS4 .so support
 +            lt_prog_compiler_pic_CXX='-fPIC'
 +        ;;
 +      m68k)
 +            # FIXME: we need at least 68020 code to build shared libraries, but
 +            # adding the `-m68020' flag to GCC prevents building anything better,
 +            # like `-m68040'.
 +            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
 +        ;;
 +      esac
 +      ;;
 +
 +    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
 +      # PIC is the default for these OSes.
 +      ;;
 +    mingw* | cygwin* | os2* | pw32* | cegcc*)
 +      # This hack is so that the source file can tell whether it is being
 +      # built for inclusion in a dll (and should export symbols for example).
 +      # Although the cygwin gcc ignores -fPIC, still need this for old-style
 +      # (--disable-auto-import) libraries
 +      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
 +      ;;
 +    darwin* | rhapsody*)
 +      # PIC is the default on this platform
 +      # Common symbols not allowed in MH_DYLIB files
 +      lt_prog_compiler_pic_CXX='-fno-common'
 +      ;;
 +    *djgpp*)
 +      # DJGPP does not support shared libraries at all
 +      lt_prog_compiler_pic_CXX=
 +      ;;
 +    interix[3-9]*)
 +      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
 +      # Instead, we relocate shared libraries at runtime.
 +      ;;
 +    sysv4*MP*)
 +      if test -d /usr/nec; then
 +      lt_prog_compiler_pic_CXX=-Kconform_pic
 +      fi
 +      ;;
 +    hpux*)
 +      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
 +      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
 +      # sets the default TLS model and affects inlining.
 +      case $host_cpu in
 +      hppa*64*)
 +      ;;
 +      *)
 +      lt_prog_compiler_pic_CXX='-fPIC'
 +      ;;
 +      esac
 +      ;;
 +    *qnx* | *nto*)
 +      # QNX uses GNU C++, but need to define -shared option too, otherwise
 +      # it will coredump.
 +      lt_prog_compiler_pic_CXX='-fPIC -shared'
 +      ;;
 +    *)
 +      lt_prog_compiler_pic_CXX='-fPIC'
 +      ;;
 +    esac
 +  else
 +    case $host_os in
 +      aix[4-9]*)
 +      # All AIX code is PIC.
 +      if test "$host_cpu" = ia64; then
 +        # AIX 5 now supports IA64 processor
 +        lt_prog_compiler_static_CXX='-Bstatic'
 +      else
 +        lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
 +      fi
 +      ;;
 +      chorus*)
 +      case $cc_basename in
 +      cxch68*)
 +        # Green Hills C++ Compiler
 +        # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 +        ;;
 +      esac
 +      ;;
 +      dgux*)
 +      case $cc_basename in
 +        ec++*)
 +          lt_prog_compiler_pic_CXX='-KPIC'
 +          ;;
 +        ghcx*)
 +          # Green Hills C++ Compiler
 +          lt_prog_compiler_pic_CXX='-pic'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      freebsd* | dragonfly*)
 +      # FreeBSD uses GNU C++
 +      ;;
 +      hpux9* | hpux10* | hpux11*)
 +      case $cc_basename in
 +        CC*)
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
 +          if test "$host_cpu" != ia64; then
 +            lt_prog_compiler_pic_CXX='+Z'
 +          fi
 +          ;;
 +        aCC*)
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
 +          case $host_cpu in
 +          hppa*64*|ia64*)
 +            # +Z the default
 +            ;;
 +          *)
 +            lt_prog_compiler_pic_CXX='+Z'
 +            ;;
 +          esac
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      interix*)
 +      # This is c89, which is MS Visual C++ (no shared libs)
 +      # Anyone wants to do a port?
 +      ;;
 +      irix5* | irix6* | nonstopux*)
 +      case $cc_basename in
 +        CC*)
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_static_CXX='-non_shared'
 +          # CC pic flag -KPIC is the default.
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      linux* | k*bsd*-gnu | kopensolaris*-gnu)
 +      case $cc_basename in
 +        KCC*)
 +          # KAI C++ Compiler
 +          lt_prog_compiler_wl_CXX='--backend -Wl,'
 +          lt_prog_compiler_pic_CXX='-fPIC'
 +          ;;
 +        ecpc* )
 +          # old Intel C++ for x86_64 which still supported -KPIC.
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_pic_CXX='-KPIC'
 +          lt_prog_compiler_static_CXX='-static'
 +          ;;
 +        icpc* )
 +          # Intel C++, used to be incompatible with GCC.
 +          # ICC 10 doesn't accept -KPIC any more.
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_pic_CXX='-fPIC'
 +          lt_prog_compiler_static_CXX='-static'
 +          ;;
 +        pgCC* | pgcpp*)
 +          # Portland Group C++ compiler
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_pic_CXX='-fpic'
 +          lt_prog_compiler_static_CXX='-Bstatic'
 +          ;;
 +        cxx*)
 +          # Compaq C++
 +          # Make sure the PIC flag is empty.  It appears that all Alpha
 +          # Linux and Compaq Tru64 Unix objects are PIC.
 +          lt_prog_compiler_pic_CXX=
 +          lt_prog_compiler_static_CXX='-non_shared'
 +          ;;
 +        xlc* | xlC*)
 +          # IBM XL 8.0 on PPC
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_pic_CXX='-qpic'
 +          lt_prog_compiler_static_CXX='-qstaticlink'
 +          ;;
 +        *)
 +          case `$CC -V 2>&1 | sed 5q` in
 +          *Sun\ C*)
 +            # Sun C++ 5.9
 +            lt_prog_compiler_pic_CXX='-KPIC'
 +            lt_prog_compiler_static_CXX='-Bstatic'
 +            lt_prog_compiler_wl_CXX='-Qoption ld '
 +            ;;
 +          esac
 +          ;;
 +      esac
 +      ;;
 +      lynxos*)
 +      ;;
 +      m88k*)
 +      ;;
 +      mvs*)
 +      case $cc_basename in
 +        cxx*)
 +          lt_prog_compiler_pic_CXX='-W c,exportall'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      netbsd* | netbsdelf*-gnu)
 +      ;;
 +      *qnx* | *nto*)
 +        # QNX uses GNU C++, but need to define -shared option too, otherwise
 +        # it will coredump.
 +        lt_prog_compiler_pic_CXX='-fPIC -shared'
 +        ;;
 +      osf3* | osf4* | osf5*)
 +      case $cc_basename in
 +        KCC*)
 +          lt_prog_compiler_wl_CXX='--backend -Wl,'
 +          ;;
 +        RCC*)
 +          # Rational C++ 2.4.1
 +          lt_prog_compiler_pic_CXX='-pic'
 +          ;;
 +        cxx*)
 +          # Digital/Compaq C++
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          # Make sure the PIC flag is empty.  It appears that all Alpha
 +          # Linux and Compaq Tru64 Unix objects are PIC.
 +          lt_prog_compiler_pic_CXX=
 +          lt_prog_compiler_static_CXX='-non_shared'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      psos*)
 +      ;;
 +      solaris*)
 +      case $cc_basename in
 +        CC*)
 +          # Sun C++ 4.2, 5.x and Centerline C++
 +          lt_prog_compiler_pic_CXX='-KPIC'
 +          lt_prog_compiler_static_CXX='-Bstatic'
 +          lt_prog_compiler_wl_CXX='-Qoption ld '
 +          ;;
 +        gcx*)
 +          # Green Hills C++ Compiler
 +          lt_prog_compiler_pic_CXX='-PIC'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      sunos4*)
 +      case $cc_basename in
 +        CC*)
 +          # Sun C++ 4.x
 +          lt_prog_compiler_pic_CXX='-pic'
 +          lt_prog_compiler_static_CXX='-Bstatic'
 +          ;;
 +        lcc*)
 +          # Lucid
 +          lt_prog_compiler_pic_CXX='-pic'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
 +      case $cc_basename in
 +        CC*)
 +          lt_prog_compiler_wl_CXX='-Wl,'
 +          lt_prog_compiler_pic_CXX='-KPIC'
 +          lt_prog_compiler_static_CXX='-Bstatic'
 +          ;;
 +      esac
 +      ;;
 +      tandem*)
 +      case $cc_basename in
 +        NCC*)
 +          # NonStop-UX NCC 3.20
 +          lt_prog_compiler_pic_CXX='-KPIC'
 +          ;;
 +        *)
 +          ;;
 +      esac
 +      ;;
 +      vxworks*)
 +      ;;
 +      *)
 +      lt_prog_compiler_can_build_shared_CXX=no
 +      ;;
 +    esac
 +  fi
 +
 +case $host_os in
 +  # For platforms which do not support PIC, -DPIC is meaningless:
 +  *djgpp*)
 +    lt_prog_compiler_pic_CXX=
 +    ;;
 +  *)
 +    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
 +    ;;
 +esac
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
 +$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 +
 +
 +
 +#
 +# Check to make sure the PIC flag actually works.
 +#
 +if test -n "$lt_prog_compiler_pic_CXX"; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
 +if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  lt_cv_prog_compiler_pic_works_CXX=no
 +   ac_outfile=conftest.$ac_objext
 +   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
 +   # Insert the option either (1) after the last *FLAGS variable, or
 +   # (2) before a word containing "conftest.", or (3) at the end.
 +   # Note that $ac_compile itself does not contain backslashes and begins
 +   # with a dollar sign (not a hyphen), so the echo should work correctly.
 +   # The option is referenced via a variable to avoid confusing sed.
 +   lt_compile=`echo "$ac_compile" | $SED \
 +   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
 +   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
 +   -e 's:$: $lt_compiler_flag:'`
-    echo "$as_me:13911: \$? = $ac_status" >&5
++   (eval echo "\"\$as_me:13783: $lt_compile\"" >&5)
 +   (eval "$lt_compile" 2>conftest.err)
 +   ac_status=$?
 +   cat conftest.err >&5
-    (eval echo "\"\$as_me:14006: $lt_compile\"" >&5)
++   echo "$as_me:13787: \$? = $ac_status" >&5
 +   if (exit $ac_status) && test -s "$ac_outfile"; then
 +     # The compiler can only warn and ignore the option if not recognized
 +     # So say no if there are warnings other than the usual output.
 +     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
 +     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
 +     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
 +       lt_cv_prog_compiler_pic_works_CXX=yes
 +     fi
 +   fi
 +   $RM conftest*
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
 +$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 +
 +if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
 +    case $lt_prog_compiler_pic_CXX in
 +     "" | " "*) ;;
 +     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
 +     esac
 +else
 +    lt_prog_compiler_pic_CXX=
 +     lt_prog_compiler_can_build_shared_CXX=no
 +fi
 +
 +fi
 +
 +
 +
 +#
 +# Check to make sure the static flag actually works.
 +#
 +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
 +if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  lt_cv_prog_compiler_static_works_CXX=no
 +   save_LDFLAGS="$LDFLAGS"
 +   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
 +   echo "$lt_simple_link_test_code" > conftest.$ac_ext
 +   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
 +     # The linker can only warn and ignore the option if not recognized
 +     # So say no if there are warnings
 +     if test -s conftest.err; then
 +       # Append any errors to the config.log.
 +       cat conftest.err 1>&5
 +       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
 +       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
 +       if diff conftest.exp conftest.er2 >/dev/null; then
 +         lt_cv_prog_compiler_static_works_CXX=yes
 +       fi
 +     else
 +       lt_cv_prog_compiler_static_works_CXX=yes
 +     fi
 +   fi
 +   $RM -r conftest*
 +   LDFLAGS="$save_LDFLAGS"
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
 +$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 +
 +if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
 +    :
 +else
 +    lt_prog_compiler_static_CXX=
 +fi
 +
 +
 +
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
 +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  lt_cv_prog_compiler_c_o_CXX=no
 +   $RM -r conftest 2>/dev/null
 +   mkdir conftest
 +   cd conftest
 +   mkdir out
 +   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +
 +   lt_compiler_flag="-o out/conftest2.$ac_objext"
 +   # Insert the option either (1) after the last *FLAGS variable, or
 +   # (2) before a word containing "conftest.", or (3) at the end.
 +   # Note that $ac_compile itself does not contain backslashes and begins
 +   # with a dollar sign (not a hyphen), so the echo should work correctly.
 +   lt_compile=`echo "$ac_compile" | $SED \
 +   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
 +   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
 +   -e 's:$: $lt_compiler_flag:'`
-    echo "$as_me:14010: \$? = $ac_status" >&5
++   (eval echo "\"\$as_me:13882: $lt_compile\"" >&5)
 +   (eval "$lt_compile" 2>out/conftest.err)
 +   ac_status=$?
 +   cat out/conftest.err >&5
-    (eval echo "\"\$as_me:14058: $lt_compile\"" >&5)
++   echo "$as_me:13886: \$? = $ac_status" >&5
 +   if (exit $ac_status) && test -s out/conftest2.$ac_objext
 +   then
 +     # The compiler can only warn and ignore the option if not recognized
 +     # So say no if there are warnings
 +     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
 +     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
 +     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
 +       lt_cv_prog_compiler_c_o_CXX=yes
 +     fi
 +   fi
 +   chmod u+w . 2>&5
 +   $RM conftest*
 +   # SGI C++ compiler will create directory out/ii_files/ for
 +   # template instantiation
 +   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
 +   $RM out/* && rmdir out
 +   cd ..
 +   $RM -r conftest
 +   $RM conftest*
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 +
 +
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
 +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  lt_cv_prog_compiler_c_o_CXX=no
 +   $RM -r conftest 2>/dev/null
 +   mkdir conftest
 +   cd conftest
 +   mkdir out
 +   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +
 +   lt_compiler_flag="-o out/conftest2.$ac_objext"
 +   # Insert the option either (1) after the last *FLAGS variable, or
 +   # (2) before a word containing "conftest.", or (3) at the end.
 +   # Note that $ac_compile itself does not contain backslashes and begins
 +   # with a dollar sign (not a hyphen), so the echo should work correctly.
 +   lt_compile=`echo "$ac_compile" | $SED \
 +   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
 +   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
 +   -e 's:$: $lt_compiler_flag:'`
-    echo "$as_me:14062: \$? = $ac_status" >&5
++   (eval echo "\"\$as_me:13934: $lt_compile\"" >&5)
 +   (eval "$lt_compile" 2>out/conftest.err)
 +   ac_status=$?
 +   cat out/conftest.err >&5
- 
-   ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
- if test "x$ac_cv_header_minix_config_h" = x""yes; then :
-   MINIX=yes
- else
-   MINIX=
- fi
- 
- 
-   if test "$MINIX" = yes; then
- 
- $as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
- 
- 
- $as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
- 
- 
- $as_echo "#define _MINIX 1" >>confdefs.h
- 
-   fi
- 
- 
-   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
- $as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
- if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
-   $as_echo_n "(cached) " >&6
- else
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
- /* end confdefs.h.  */
- 
- #       define __EXTENSIONS__ 1
-         $ac_includes_default
- int
- main ()
- {
- 
-   ;
-   return 0;
- }
++   echo "$as_me:13938: \$? = $ac_status" >&5
 +   if (exit $ac_status) && test -s out/conftest2.$ac_objext
 +   then
 +     # The compiler can only warn and ignore the option if not recognized
 +     # So say no if there are warnings
 +     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
 +     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
 +     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
 +       lt_cv_prog_compiler_c_o_CXX=yes
 +     fi
 +   fi
 +   chmod u+w . 2>&5
 +   $RM conftest*
 +   # SGI C++ compiler will create directory out/ii_files/ for
 +   # template instantiation
 +   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
 +   $RM out/* && rmdir out
 +   cd ..
 +   $RM -r conftest
 +   $RM conftest*
 +
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 +
 +
 +
 +
 +hard_links="nottested"
 +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
 +  # do not overwrite the value of need_locks provided by the user
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
 +$as_echo_n "checking if we can lock with hard links... " >&6; }
 +  hard_links=yes
 +  $RM conftest*
 +  ln conftest.a conftest.b 2>/dev/null && hard_links=no
 +  touch conftest.a
 +  ln conftest.a conftest.b 2>&5 || hard_links=no
 +  ln conftest.a conftest.b 2>/dev/null && hard_links=no
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
 +$as_echo "$hard_links" >&6; }
 +  if test "$hard_links" = no; then
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
 +    need_locks=warn
 +  fi
 +else
 +  need_locks=no
 +fi
 +
 +
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 +
 +  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
 +  case $host_os in
 +  aix[4-9]*)
 +    # If we're using GNU nm, then we don't want the "-C" option.
 +    # -C means demangle to AIX nm, but means don't demangle with GNU nm
 +    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 +      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 +    else
 +      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 +    fi
 +    ;;
 +  pw32*)
 +    export_symbols_cmds_CXX="$ltdll_cmds"
 +  ;;
 +  cygwin* | mingw* | cegcc*)
 +    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
 +  ;;
 +  linux* | k*bsd*-gnu)
 +    link_all_deplibs_CXX=no
 +  ;;
 +  *)
 +    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
 +  ;;
 +  esac
 +  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 +$as_echo "$ld_shlibs_CXX" >&6; }
 +test "$ld_shlibs_CXX" = no && can_build_shared=no
 +
 +with_gnu_ld_CXX=$with_gnu_ld
 +
 +
 +
 +
 +
 +
 +#
 +# Do we need to explicitly link libc?
 +#
 +case "x$archive_cmds_need_lc_CXX" in
 +x|xyes)
 +  # Assume -lc should be added
 +  archive_cmds_need_lc_CXX=yes
 +
 +  if test "$enable_shared" = yes && test "$GCC" = yes; then
 +    case $archive_cmds_CXX in
 +    *'~'*)
 +      # FIXME: we may have to deal with multi-command sequences.
 +      ;;
 +    '$CC '*)
 +      # Test whether the compiler implicitly links with -lc since on some
 +      # systems, -lgcc has to come before -lc. If gcc already passes -lc
 +      # to ld, don't add -lc before -lgcc.
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
 +      $RM conftest*
 +      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 +
 +      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
 +  (eval $ac_compile) 2>&5
 +  ac_status=$?
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; } 2>conftest.err; then
 +        soname=conftest
 +        lib=conftest
 +        libobjs=conftest.$ac_objext
 +        deplibs=
 +        wl=$lt_prog_compiler_wl_CXX
 +      pic_flag=$lt_prog_compiler_pic_CXX
 +        compiler_flags=-v
 +        linker_flags=-v
 +        verstring=
 +        output_objdir=.
 +        libname=conftest
 +        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
 +        allow_undefined_flag_CXX=
 +        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
 +  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
 +  ac_status=$?
 +  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
 +  test $ac_status = 0; }
 +        then
 +        archive_cmds_need_lc_CXX=no
 +        else
 +        archive_cmds_need_lc_CXX=yes
 +        fi
 +        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
 +      else
 +        cat conftest.err 1>&5
 +      fi
 +      $RM conftest*
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5
 +$as_echo "$archive_cmds_need_lc_CXX" >&6; }
 +      ;;
 +    esac
 +  fi
 +  ;;
 +esac
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 +$as_echo_n "checking dynamic linker characteristics... " >&6; }
 +
 +library_names_spec=
 +libname_spec='lib$name'
 +soname_spec=
 +shrext_cmds=".so"
 +postinstall_cmds=
 +postuninstall_cmds=
 +finish_cmds=
 +finish_eval=
 +shlibpath_var=
 +shlibpath_overrides_runpath=unknown
 +version_type=none
 +dynamic_linker="$host_os ld.so"
 +sys_lib_dlsearch_path_spec="/lib /usr/lib"
 +need_lib_prefix=unknown
 +hardcode_into_libs=no
 +
 +# when you set need_version to no, make sure it does not cause -set_version
 +# flags to be left without arguments
 +need_version=unknown
 +
 +case $host_os in
 +aix3*)
 +  version_type=linux
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
 +  shlibpath_var=LIBPATH
 +
 +  # AIX 3 has no versioning support, so we append a major version to the name.
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  ;;
 +
 +aix[4-9]*)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  hardcode_into_libs=yes
 +  if test "$host_cpu" = ia64; then
 +    # AIX 5 supports IA64
 +    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
 +    shlibpath_var=LD_LIBRARY_PATH
 +  else
 +    # With GCC up to 2.95.x, collect2 would create an import file
 +    # for dependence libraries.  The import file would start with
 +    # the line `#! .'.  This would cause the generated library to
 +    # depend on `.', always an invalid library.  This was fixed in
 +    # development snapshots of GCC prior to 3.0.
 +    case $host_os in
 +      aix4 | aix4.[01] | aix4.[01].*)
 +      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 +         echo ' yes '
 +         echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 +      :
 +      else
 +      can_build_shared=no
 +      fi
 +      ;;
 +    esac
 +    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
 +    # soname into executable. Probably we can add versioning support to
 +    # collect2, so additional links can be useful in future.
 +    if test "$aix_use_runtimelinking" = yes; then
 +      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
 +      # instead of lib<name>.a to let people know that these are not
 +      # typical AIX shared libraries.
 +      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +    else
 +      # We preserve .a as extension for shared libraries through AIX4.2
 +      # and later when we are not doing run time linking.
 +      library_names_spec='${libname}${release}.a $libname.a'
 +      soname_spec='${libname}${release}${shared_ext}$major'
 +    fi
 +    shlibpath_var=LIBPATH
 +  fi
 +  ;;
 +
 +amigaos*)
 +  case $host_cpu in
 +  powerpc)
 +    # Since July 2007 AmigaOS4 officially supports .so libraries.
 +    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +    ;;
 +  m68k)
 +    library_names_spec='$libname.ixlibrary $libname.a'
 +    # Create ${libname}_ixlibrary.a entries in /sys/libs.
 +    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
 +    ;;
 +  esac
 +  ;;
 +
 +beos*)
 +  library_names_spec='${libname}${shared_ext}'
 +  dynamic_linker="$host_os ld.so"
 +  shlibpath_var=LIBRARY_PATH
 +  ;;
 +
 +bsdi[45]*)
 +  version_type=linux
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
 +  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
 +  # the default ld.so.conf also contains /usr/contrib/lib and
 +  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
 +  # libtool to hard-code these into programs
 +  ;;
 +
 +cygwin* | mingw* | pw32* | cegcc*)
 +  version_type=windows
 +  shrext_cmds=".dll"
 +  need_version=no
 +  need_lib_prefix=no
 +
 +  case $GCC,$host_os in
 +  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
 +    library_names_spec='$libname.dll.a'
 +    # DLL is installed to $(libdir)/../bin by postinstall_cmds
 +    postinstall_cmds='base_file=`basename \${file}`~
 +      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
 +      dldir=$destdir/`dirname \$dlpath`~
 +      test -d \$dldir || mkdir -p \$dldir~
 +      $install_prog $dir/$dlname \$dldir/$dlname~
 +      chmod a+x \$dldir/$dlname~
 +      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
 +        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
 +      fi'
 +    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
 +      dlpath=$dir/\$dldll~
 +       $RM \$dlpath'
 +    shlibpath_overrides_runpath=yes
 +
 +    case $host_os in
 +    cygwin*)
 +      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
 +      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
 +      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
 +      ;;
 +    mingw* | cegcc*)
 +      # MinGW DLLs use traditional 'lib' prefix
 +      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
 +      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
 +      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
 +        # It is most probably a Windows format PATH printed by
 +        # mingw gcc, but we are running on Cygwin. Gcc prints its search
 +        # path with ; separators, and with drive letters. We can handle the
 +        # drive letters (cygwin fileutils understands them), so leave them,
 +        # especially as we might pass files found there to a mingw objdump,
 +        # which wouldn't understand a cygwinified path. Ahh.
 +        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
 +      else
 +        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
 +      fi
 +      ;;
 +    pw32*)
 +      # pw32 DLLs use 'pw' prefix rather than 'lib'
 +      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
 +      ;;
 +    esac
 +    ;;
 +
 +  *)
 +    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
 +    ;;
 +  esac
 +  dynamic_linker='Win32 ld.exe'
 +  # FIXME: first we should search . and the directory the executable is in
 +  shlibpath_var=PATH
 +  ;;
 +
 +darwin* | rhapsody*)
 +  dynamic_linker="$host_os dyld"
 +  version_type=darwin
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
 +  soname_spec='${libname}${release}${major}$shared_ext'
 +  shlibpath_overrides_runpath=yes
 +  shlibpath_var=DYLD_LIBRARY_PATH
 +  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 +
 +  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
 +  ;;
 +
 +dgux*)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  ;;
 +
 +freebsd1*)
 +  dynamic_linker=no
 +  ;;
 +
 +freebsd* | dragonfly*)
 +  # DragonFly does not have aout.  When/if they implement a new
 +  # versioning mechanism, adjust this.
 +  if test -x /usr/bin/objformat; then
 +    objformat=`/usr/bin/objformat`
 +  else
 +    case $host_os in
 +    freebsd[123]*) objformat=aout ;;
 +    *) objformat=elf ;;
 +    esac
 +  fi
 +  version_type=freebsd-$objformat
 +  case $version_type in
 +    freebsd-elf*)
 +      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
 +      need_version=no
 +      need_lib_prefix=no
 +      ;;
 +    freebsd-*)
 +      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
 +      need_version=yes
 +      ;;
 +  esac
 +  shlibpath_var=LD_LIBRARY_PATH
 +  case $host_os in
 +  freebsd2*)
 +    shlibpath_overrides_runpath=yes
 +    ;;
 +  freebsd3.[01]* | freebsdelf3.[01]*)
 +    shlibpath_overrides_runpath=yes
 +    hardcode_into_libs=yes
 +    ;;
 +  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
 +  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
 +    shlibpath_overrides_runpath=no
 +    hardcode_into_libs=yes
 +    ;;
 +  *) # from 4.6 on, and DragonFly
 +    shlibpath_overrides_runpath=yes
 +    hardcode_into_libs=yes
 +    ;;
 +  esac
 +  ;;
 +
 +gnu*)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  hardcode_into_libs=yes
 +  ;;
 +
 +hpux9* | hpux10* | hpux11*)
 +  # Give a soname corresponding to the major version so that dld.sl refuses to
 +  # link against other versions.
 +  version_type=sunos
 +  need_lib_prefix=no
 +  need_version=no
 +  case $host_cpu in
 +  ia64*)
 +    shrext_cmds='.so'
 +    hardcode_into_libs=yes
 +    dynamic_linker="$host_os dld.so"
 +    shlibpath_var=LD_LIBRARY_PATH
 +    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +    soname_spec='${libname}${release}${shared_ext}$major'
 +    if test "X$HPUX_IA64_MODE" = X32; then
 +      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
 +    else
 +      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
 +    fi
 +    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
 +    ;;
 +  hppa*64*)
 +    shrext_cmds='.sl'
 +    hardcode_into_libs=yes
 +    dynamic_linker="$host_os dld.sl"
 +    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
 +    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +    soname_spec='${libname}${release}${shared_ext}$major'
 +    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
 +    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
 +    ;;
 +  *)
 +    shrext_cmds='.sl'
 +    dynamic_linker="$host_os dld.sl"
 +    shlibpath_var=SHLIB_PATH
 +    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +    soname_spec='${libname}${release}${shared_ext}$major'
 +    ;;
 +  esac
 +  # HP-UX runs *really* slowly unless shared libraries are mode 555.
 +  postinstall_cmds='chmod 555 $lib'
 +  ;;
 +
 +interix[3-9]*)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=no
 +  hardcode_into_libs=yes
 +  ;;
 +
 +irix5* | irix6* | nonstopux*)
 +  case $host_os in
 +    nonstopux*) version_type=nonstopux ;;
 +    *)
 +      if test "$lt_cv_prog_gnu_ld" = yes; then
 +              version_type=linux
 +      else
 +              version_type=irix
 +      fi ;;
 +  esac
 +  need_lib_prefix=no
 +  need_version=no
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
 +  case $host_os in
 +  irix5* | nonstopux*)
 +    libsuff= shlibsuff=
 +    ;;
 +  *)
 +    case $LD in # libtool.m4 will add one of these switches to LD
 +    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
 +      libsuff= shlibsuff= libmagic=32-bit;;
 +    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
 +      libsuff=32 shlibsuff=N32 libmagic=N32;;
 +    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
 +      libsuff=64 shlibsuff=64 libmagic=64-bit;;
 +    *) libsuff= shlibsuff= libmagic=never-match;;
 +    esac
 +    ;;
 +  esac
 +  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
 +  shlibpath_overrides_runpath=no
 +  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
 +  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
 +  hardcode_into_libs=yes
 +  ;;
 +
 +# No shared lib support for Linux oldld, aout, or coff.
 +linux*oldld* | linux*aout* | linux*coff*)
 +  dynamic_linker=no
 +  ;;
 +
 +# This must be Linux ELF.
 +linux* | k*bsd*-gnu | kopensolaris*-gnu)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=no
 +  # Some binutils ld are patched to set DT_RUNPATH
 +  save_LDFLAGS=$LDFLAGS
 +  save_libdir=$libdir
 +  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
 +       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
 +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +int
 +main ()
 +{
 +
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_cxx_try_link "$LINENO"; then :
 +  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
 +  shlibpath_overrides_runpath=yes
 +fi
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +  LDFLAGS=$save_LDFLAGS
 +  libdir=$save_libdir
 +
 +  # This implies no fast_install, which is unacceptable.
 +  # Some rework will be needed to allow for fast_install
 +  # before this can be enabled.
 +  hardcode_into_libs=yes
 +
 +  # Append ld.so.conf contents to the search path
 +  if test -f /etc/ld.so.conf; then
 +    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[     ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
 +    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
 +  fi
 +
 +  # We used to test for /lib/ld.so.1 and disable shared libraries on
 +  # powerpc, because MkLinux only supported shared libraries with the
 +  # GNU dynamic linker.  Since this was broken with cross compilers,
 +  # most powerpc-linux boxes support dynamic linking these days and
 +  # people can always --disable-shared, the test was removed, and we
 +  # assume the GNU/Linux dynamic linker is in use.
 +  dynamic_linker='GNU/Linux ld.so'
 +  ;;
 +
 +netbsdelf*-gnu)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=no
 +  hardcode_into_libs=yes
 +  dynamic_linker='NetBSD ld.elf_so'
 +  ;;
 +
 +netbsd*)
 +  version_type=sunos
 +  need_lib_prefix=no
 +  need_version=no
 +  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
 +    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
 +    dynamic_linker='NetBSD (a.out) ld.so'
 +  else
 +    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
 +    soname_spec='${libname}${release}${shared_ext}$major'
 +    dynamic_linker='NetBSD ld.elf_so'
 +  fi
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=yes
 +  hardcode_into_libs=yes
 +  ;;
 +
 +newsos6)
 +  version_type=linux
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=yes
 +  ;;
 +
 +*nto* | *qnx*)
 +  version_type=qnx
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=no
 +  hardcode_into_libs=yes
 +  dynamic_linker='ldqnx.so'
 +  ;;
 +
 +openbsd*)
 +  version_type=sunos
 +  sys_lib_dlsearch_path_spec="/usr/lib"
 +  need_lib_prefix=no
 +  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
 +  case $host_os in
 +    openbsd3.3 | openbsd3.3.*)        need_version=yes ;;
 +    *)                                need_version=no  ;;
 +  esac
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
 +  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
 +    case $host_os in
 +      openbsd2.[89] | openbsd2.[89].*)
 +      shlibpath_overrides_runpath=no
 +      ;;
 +      *)
 +      shlibpath_overrides_runpath=yes
 +      ;;
 +      esac
 +  else
 +    shlibpath_overrides_runpath=yes
 +  fi
 +  ;;
 +
 +os2*)
 +  libname_spec='$name'
 +  shrext_cmds=".dll"
 +  need_lib_prefix=no
 +  library_names_spec='$libname${shared_ext} $libname.a'
 +  dynamic_linker='OS/2 ld.exe'
 +  shlibpath_var=LIBPATH
 +  ;;
 +
 +osf3* | osf4* | osf5*)
 +  version_type=osf
 +  need_lib_prefix=no
 +  need_version=no
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
 +  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
 +  ;;
 +
 +rdos*)
 +  dynamic_linker=no
 +  ;;
 +
 +solaris*)
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=yes
 +  hardcode_into_libs=yes
 +  # ldd complains unless libraries are executable
 +  postinstall_cmds='chmod +x $lib'
 +  ;;
 +
 +sunos4*)
 +  version_type=sunos
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
 +  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=yes
 +  if test "$with_gnu_ld" = yes; then
 +    need_lib_prefix=no
 +  fi
 +  need_version=yes
 +  ;;
 +
 +sysv4 | sysv4.3*)
 +  version_type=linux
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  case $host_vendor in
 +    sni)
 +      shlibpath_overrides_runpath=no
 +      need_lib_prefix=no
 +      runpath_var=LD_RUN_PATH
 +      ;;
 +    siemens)
 +      need_lib_prefix=no
 +      ;;
 +    motorola)
 +      need_lib_prefix=no
 +      need_version=no
 +      shlibpath_overrides_runpath=no
 +      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
 +      ;;
 +  esac
 +  ;;
 +
 +sysv4*MP*)
 +  if test -d /usr/nec ;then
 +    version_type=linux
 +    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
 +    soname_spec='$libname${shared_ext}.$major'
 +    shlibpath_var=LD_LIBRARY_PATH
 +  fi
 +  ;;
 +
 +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
 +  version_type=freebsd-elf
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=yes
 +  hardcode_into_libs=yes
 +  if test "$with_gnu_ld" = yes; then
 +    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
 +  else
 +    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
 +    case $host_os in
 +      sco3.2v5*)
 +        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
 +      ;;
 +    esac
 +  fi
 +  sys_lib_dlsearch_path_spec='/usr/lib'
 +  ;;
 +
 +tpf*)
 +  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
 +  version_type=linux
 +  need_lib_prefix=no
 +  need_version=no
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  shlibpath_overrides_runpath=no
 +  hardcode_into_libs=yes
 +  ;;
 +
 +uts4*)
 +  version_type=linux
 +  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
 +  soname_spec='${libname}${release}${shared_ext}$major'
 +  shlibpath_var=LD_LIBRARY_PATH
 +  ;;
 +
 +*)
 +  dynamic_linker=no
 +  ;;
 +esac
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
 +$as_echo "$dynamic_linker" >&6; }
 +test "$dynamic_linker" = no && can_build_shared=no
 +
 +variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 +if test "$GCC" = yes; then
 +  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 +fi
 +
 +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
 +  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
 +fi
 +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
 +  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 +fi
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 +hardcode_action_CXX=
 +if test -n "$hardcode_libdir_flag_spec_CXX" ||
 +   test -n "$runpath_var_CXX" ||
 +   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 +
 +  # We can hardcode non-existent directories.
 +  if test "$hardcode_direct_CXX" != no &&
 +     # If the only mechanism to avoid hardcoding is shlibpath_var, we
 +     # have to relink, otherwise we might link with an installed library
 +     # when we should be linking with a yet-to-be-installed one
 +     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
 +     test "$hardcode_minus_L_CXX" != no; then
 +    # Linking always hardcodes the temporary library directory.
 +    hardcode_action_CXX=relink
 +  else
 +    # We can link without hardcoding, and we can hardcode nonexisting dirs.
 +    hardcode_action_CXX=immediate
 +  fi
 +else
 +  # We cannot hardcode anything, or else we can only hardcode existing
 +  # directories.
 +  hardcode_action_CXX=unsupported
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
 +$as_echo "$hardcode_action_CXX" >&6; }
 +
 +if test "$hardcode_action_CXX" = relink ||
 +   test "$inherit_rpath_CXX" = yes; then
 +  # Fast installation is not supported
 +  enable_fast_install=no
 +elif test "$shlibpath_overrides_runpath" = yes ||
 +     test "$enable_shared" = no; then
 +  # Fast installation is not necessary
 +  enable_fast_install=needless
 +fi
 +
 +
 +
 +
 +
 +
 +
 +  fi # test -n "$compiler"
 +
 +  CC=$lt_save_CC
 +  LDCXX=$LD
 +  LD=$lt_save_LD
 +  GCC=$lt_save_GCC
 +  with_gnu_ld=$lt_save_with_gnu_ld
 +  lt_cv_path_LDCXX=$lt_cv_path_LD
 +  lt_cv_path_LD=$lt_save_path_LD
 +  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
 +  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 +fi # test "$_lt_caught_CXX_error" != yes
 +
 +ac_ext=c
 +ac_cpp='$CPP $CPPFLAGS'
 +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 +ac_compiler_gnu=$ac_cv_c_compiler_gnu
 +
 +
 +ac_config_headers="$ac_config_headers config.h"
 +
- if ac_fn_c_try_compile "$LINENO"; then :
-   ac_cv_safe_to_define___extensions__=yes
- else
-   ac_cv_safe_to_define___extensions__=no
- fi
- rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
- $as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
-   test $ac_cv_safe_to_define___extensions__ = yes &&
-     $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
++for ac_header in stdarg.h stdio.h stdint.h sys/param.h
++do :
++  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
++ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
++if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
++  cat >>confdefs.h <<_ACEOF
++#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 +_ACEOF
-   $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
 +
-   $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
++fi
 +
-   $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
++done
 +
-   $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
++ac_fn_c_check_func "$LINENO" "vasprintf" "ac_cv_func_vasprintf"
++if test "x$ac_cv_func_vasprintf" = x""yes; then :
++  $as_echo "#define HAVE_VASPRINTF 1" >>confdefs.h
 +
- for dir in $check_krb5_dir $prefix /usr /usr/local ; do
++else
++  case " $LIBOBJS " in
++  *" vasprintf.$ac_objext "* ) ;;
++  *) LIBOBJS="$LIBOBJS vasprintf.$ac_objext"
++ ;;
++esac
 +
++fi
 +
 +
 +
 +
 +reauth=no
 +# Check whether --enable-reauth was given.
 +if test "${enable_reauth+set}" = set; then :
 +  enableval=$enable_reauth;  if test "x$enableval" = "xyes" -o "x$enableval" = "xno" ; then
 +      reauth=$enableval
 +    else
 +      echo "--enable-reauth argument must be yes or no"
 +      exit -1
 +    fi
 +
 +fi
 +
 +
 +if test "x$reauth" = "xyes" ; then
 +  echo "Fast reauthentication protocol enabled"
 +  TARGET_CFLAGS="$TARGET_CFLAGS -DGSSEAP_ENABLE_REAUTH"
 +fi
 + if test "x$reauth" != "xno"; then
 +  GSSEAP_ENABLE_REAUTH_TRUE=
 +  GSSEAP_ENABLE_REAUTH_FALSE='#'
 +else
 +  GSSEAP_ENABLE_REAUTH_TRUE='#'
 +  GSSEAP_ENABLE_REAUTH_FALSE=
 +fi
 +
 +
++acceptor=yes
++# Check whether --enable-acceptor was given.
++if test "${enable_acceptor+set}" = set; then :
++  enableval=$enable_acceptor;  if test "x$enableval" = "xyes" -o "x$enableval" = "xno" ; then
++      acceptor=$enableval
++    else
++      echo "--enable-acceptor argument must be yes or no"
++      exit -1
++    fi
++
++fi
++
++
++if test "x$acceptor" = "xyes" ; then
++  echo "acceptor enabled"
++  TARGET_CFLAGS="$TARGET_CFLAGS -DGSSEAP_ENABLE_ACCEPTOR"
++fi
++ if test "x$acceptor" != "xno"; then
++  GSSEAP_ENABLE_ACCEPTOR_TRUE=
++  GSSEAP_ENABLE_ACCEPTOR_FALSE='#'
++else
++  GSSEAP_ENABLE_ACCEPTOR_TRUE='#'
++  GSSEAP_ENABLE_ACCEPTOR_FALSE=
++fi
++
++
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for windows" >&5
++$as_echo_n "checking for windows... " >&6; }
++target_windows="no"
++ac_fn_c_check_header_mongrel "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default"
++if test "x$ac_cv_header_windows_h" = x""yes; then :
++  target_windows="yes"
++else
++  target_windows="no"
++fi
++
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $target_windows" >&5
++$as_echo "$target_windows" >&6; }
++ if test "x$target_windows" = "xyes"; then
++  TARGET_WINDOWS_TRUE=
++  TARGET_WINDOWS_FALSE='#'
++else
++  TARGET_WINDOWS_TRUE='#'
++  TARGET_WINDOWS_FALSE=
++fi
 +
 +
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GSS-API and Kerberos implementation" >&5
 +$as_echo_n "checking for GSS-API and Kerberos implementation... " >&6; }
 +KRB5_DIR=
 +found_krb5="no"
 +
 +# Check whether --with-krb5 was given.
 +if test "${with_krb5+set}" = set; then :
 +  withval=$with_krb5; check_krb5_dir="$withval"
 +else
 +  check_krb5_dir=
 +fi
 +
-      KRB5_CFLAGS=`$dir/bin/krb5-config gssapi --cflags`;
-      KRB5_LIBS=`$dir/bin/krb5-config gssapi --libs`;
-      COMPILE_ET="$dir/bin/compile_et";
++for dir in $check_krb5_dir $prefix /usr/local /usr ; do
 +   krb5dir="$dir"
 +   if test -x "$dir/bin/krb5-config"; then
 +     found_krb5="yes";
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_krb5" >&5
- $as_echo "$found_krb5" >&6; }
++     if test "x$target_windows" = "xyes"; then
++        KRB5_CFLAGS=-I"$check_krb5_dir/include";
++        KRB5_LDFLAGS="-L$check_krb5_dir/lib/";
++        KRB5_LIBS="-lkrb5_32 -lgssapi32";
++        COMPILE_ET="$check_krb5_dir/bin/compile_et";
++      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++     else
++        KRB5_CFLAGS=`$dir/bin/krb5-config gssapi --cflags`;
++        KRB5_LDFLAGS="-L$dir/lib";
++        KRB5_LIBS=`$dir/bin/krb5-config gssapi --libs`
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
++$as_echo "yes" >&6; }
++        # Extract the first word of "compile_et", so it can be a program name with args.
++set dummy compile_et; ac_word=$2
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
++$as_echo_n "checking for $ac_word... " >&6; }
++if test "${ac_cv_path_COMPILE_ET+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  case $COMPILE_ET in
++  [\\/]* | ?:[\\/]*)
++  ac_cv_path_COMPILE_ET="$COMPILE_ET" # Let the user override the test with a path.
++  ;;
++  *)
++  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $dir/bin$PATH_SEPARATOr
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++    for ac_exec_ext in '' $ac_executable_extensions; do
++  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
++    ac_cv_path_COMPILE_ET="$as_dir/$ac_word$ac_exec_ext"
++    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++  done
++IFS=$as_save_IFS
++
++  test -z "$ac_cv_path_COMPILE_ET" && ac_cv_path_COMPILE_ET="compile_et"
++  ;;
++esac
++fi
++COMPILE_ET=$ac_cv_path_COMPILE_ET
++if test -n "$COMPILE_ET"; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMPILE_ET" >&5
++$as_echo "$COMPILE_ET" >&6; }
++else
++  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
++$as_echo "no" >&6; }
++fi
++
++
++     fi
 +     break;
 +   fi
 +done
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Shibboleth implementation" >&5
- $as_echo_n "checking for Shibboleth implementation... " >&6; }
- SHIBSP_DIR=
- found_shibsp="no"
 +if test x_$found_krb5 != x_yes; then
++   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_krb5" >&5
++$as_echo "$found_krb5" >&6; }
 +   as_fn_error $? "
 +----------------------------------------------------------------------
 +  Cannot find GSS-API/Kerberos libraries.
 +
 +  Please install MIT or Heimdal or specify installation directory with
 +  --with-krb5=(dir).
 +----------------------------------------------------------------------
 +" "$LINENO" 5
 +else
 +      printf "Kerberos found in $krb5dir\n";
 +
 +
 +
++
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GSS_C_NT_COMPOSITE_EXPORT in -lkrb5" >&5
 +$as_echo_n "checking for GSS_C_NT_COMPOSITE_EXPORT in -lkrb5... " >&6; }
 +if test "${ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_check_lib_save_LIBS=$LIBS
 +LIBS="-lkrb5 "$KRB5_LIBS" $LIBS"
 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +/* Override any GCC internal prototype to avoid an error.
 +   Use char because int might match the return type of a GCC
 +   builtin and then its argument prototype would still apply.  */
 +#ifdef __cplusplus
 +extern "C"
 +#endif
 +char GSS_C_NT_COMPOSITE_EXPORT ();
 +int
 +main ()
 +{
 +return GSS_C_NT_COMPOSITE_EXPORT ();
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_link "$LINENO"; then :
 +  ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT=yes
 +else
 +  ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +LIBS=$ac_check_lib_save_LIBS
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT" >&5
 +$as_echo "$ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT" >&6; }
 +if test "x$ac_cv_lib_krb5_GSS_C_NT_COMPOSITE_EXPORT" = x""yes; then :
 +
 +cat >>confdefs.h <<_ACEOF
 +#define HAVE_GSS_C_NT_COMPOSITE_EXPORT 1
 +_ACEOF
 +
 +fi
 +
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gss_inquire_attrs_for_mech in -lkrb5" >&5
 +$as_echo_n "checking for gss_inquire_attrs_for_mech in -lkrb5... " >&6; }
 +if test "${ac_cv_lib_krb5_gss_inquire_attrs_for_mech+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_check_lib_save_LIBS=$LIBS
 +LIBS="-lkrb5 "$KRB5_LIBS" $LIBS"
 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +/* Override any GCC internal prototype to avoid an error.
 +   Use char because int might match the return type of a GCC
 +   builtin and then its argument prototype would still apply.  */
 +#ifdef __cplusplus
 +extern "C"
 +#endif
 +char gss_inquire_attrs_for_mech ();
 +int
 +main ()
 +{
 +return gss_inquire_attrs_for_mech ();
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_link "$LINENO"; then :
 +  ac_cv_lib_krb5_gss_inquire_attrs_for_mech=yes
 +else
 +  ac_cv_lib_krb5_gss_inquire_attrs_for_mech=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +LIBS=$ac_check_lib_save_LIBS
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_krb5_gss_inquire_attrs_for_mech" >&5
 +$as_echo "$ac_cv_lib_krb5_gss_inquire_attrs_for_mech" >&6; }
 +if test "x$ac_cv_lib_krb5_gss_inquire_attrs_for_mech" = x""yes; then :
 +
 +cat >>confdefs.h <<_ACEOF
 +#define HAVE_GSS_INQUIRE_ATTRS_FOR_MECH 1
 +_ACEOF
 +
 +fi
 +
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gss_krb5_import_cred in -lkrb5" >&5
 +$as_echo_n "checking for gss_krb5_import_cred in -lkrb5... " >&6; }
 +if test "${ac_cv_lib_krb5_gss_krb5_import_cred+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_check_lib_save_LIBS=$LIBS
 +LIBS="-lkrb5 "$KRB5_LIBS" $LIBS"
 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +/* Override any GCC internal prototype to avoid an error.
 +   Use char because int might match the return type of a GCC
 +   builtin and then its argument prototype would still apply.  */
 +#ifdef __cplusplus
 +extern "C"
 +#endif
 +char gss_krb5_import_cred ();
 +int
 +main ()
 +{
 +return gss_krb5_import_cred ();
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_link "$LINENO"; then :
 +  ac_cv_lib_krb5_gss_krb5_import_cred=yes
 +else
 +  ac_cv_lib_krb5_gss_krb5_import_cred=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +LIBS=$ac_check_lib_save_LIBS
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_krb5_gss_krb5_import_cred" >&5
 +$as_echo "$ac_cv_lib_krb5_gss_krb5_import_cred" >&6; }
 +if test "x$ac_cv_lib_krb5_gss_krb5_import_cred" = x""yes; then :
 +
 +cat >>confdefs.h <<_ACEOF
 +#define HAVE_GSS_KRB5_IMPORT_CRED 1
 +_ACEOF
 +
 +fi
 +
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for heimdal_version in -lkrb5" >&5
 +$as_echo_n "checking for heimdal_version in -lkrb5... " >&6; }
 +if test "${ac_cv_lib_krb5_heimdal_version+set}" = set; then :
 +  $as_echo_n "(cached) " >&6
 +else
 +  ac_check_lib_save_LIBS=$LIBS
 +LIBS="-lkrb5 "$KRB5_LIBS" $LIBS"
 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 +/* end confdefs.h.  */
 +
 +/* Override any GCC internal prototype to avoid an error.
 +   Use char because int might match the return type of a GCC
 +   builtin and then its argument prototype would still apply.  */
 +#ifdef __cplusplus
 +extern "C"
 +#endif
 +char heimdal_version ();
 +int
 +main ()
 +{
 +return heimdal_version ();
 +  ;
 +  return 0;
 +}
 +_ACEOF
 +if ac_fn_c_try_link "$LINENO"; then :
 +  ac_cv_lib_krb5_heimdal_version=yes
 +else
 +  ac_cv_lib_krb5_heimdal_version=no
 +fi
 +rm -f core conftest.err conftest.$ac_objext \
 +    conftest$ac_exeext conftest.$ac_ext
 +LIBS=$ac_check_lib_save_LIBS
 +fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_krb5_heimdal_version" >&5
 +$as_echo "$ac_cv_lib_krb5_heimdal_version" >&6; }
 +if test "x$ac_cv_lib_krb5_heimdal_version" = x""yes; then :
 +
 +cat >>confdefs.h <<_ACEOF
 +#define HAVE_HEIMDAL_VERSION 1
 +_ACEOF
 +, heimdal=yes
 +else
 +  heimdal=no
 +fi
 +
 +       if test "x$heimdal" != "xno"; then
 +  HEIMDAL_TRUE=
 +  HEIMDAL_FALSE='#'
 +else
 +  HEIMDAL_TRUE='#'
 +  HEIMDAL_FALSE=
 +fi
 +
 +fi
 +
- # Check whether --with-shibsp was given.
- if test "${with_shibsp+set}" = set; then :
-   withval=$with_shibsp; check_shibsp_dir="$withval"
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for OpenSAML implementation" >&5
++$as_echo_n "checking for OpenSAML implementation... " >&6; }
++OPENSAML_DIR=
++found_opensaml="no"
 +
-   check_shibsp_dir=
++# Check whether --with-opensaml was given.
++if test "${with_opensaml+set}" = set; then :
++  withval=$with_opensaml; check_opensaml_dir="$withval"
 +else
- for dir in $check_shibsp_dir $prefix /usr /usr/local ; do
-    shibspdir="$dir"
-    if test -f "$dir/include/shibsp/SPConfig.h"; then
-      found_shibsp="yes";
-      SHIBSP_DIR="${shibspdir}"
-      SHIBSP_CXXFLAGS="-I$shibspdir/include";
++  check_opensaml_dir=
 +fi
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_shibsp" >&5
- $as_echo "$found_shibsp" >&6; }
- if test x_$found_shibsp != x_yes; then
-    as_fn_error $? "
++if test x_$check_opensaml_dir != x_no; then
++for dir in $check_opensaml_dir $prefix /usr /usr/local ; do
++   opensamldir="$dir"
++   if test -f "$dir/include/saml/Assertion.h"; then
++     found_opensaml="yes";
++     OPENSAML_DIR="${opensamldir}"
++     OPENSAML_CXXFLAGS="-I$opensamldir/include";
 +     break;
 +   fi
 +done
-   Cannot find Shibboleth/OpenSAML libraries.
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_opensaml" >&5
++$as_echo "$found_opensaml" >&6; }
++if test x_$check_opensaml_dir != x_no; then
++if test x_$found_opensaml != x_yes; then
++   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING:
 +----------------------------------------------------------------------
-   Please install Shibboleth or specify installation directory with
-   --with-shibsp=(dir).
++  Cannot find OpenSAML libraries, building without OpenSAML support.
 +
- " "$LINENO" 5
++  Please install OpenSAML or specify installation directory with
++  --with-opensaml=(dir).
 +----------------------------------------------------------------------
-       printf "Shibboleth found in $shibspdir\n";
-       SHIBSP_LIBS="-lshibsp  -lsaml -lxml-security-c -lxmltooling -lxerces-c";
-       SHIBSP_LDFLAGS="-L$shibspdir/lib";
++" >&5
++$as_echo "$as_me: WARNING:
++----------------------------------------------------------------------
++  Cannot find OpenSAML libraries, building without OpenSAML support.
++
++  Please install OpenSAML or specify installation directory with
++  --with-opensaml=(dir).
++----------------------------------------------------------------------
++" >&2;}
 +else
-    as_fn_error $? "
++      printf "OpenSAML found in $opensamldir\n";
++      OPENSAML_LIBS="-lsaml -lxml-security-c -lxmltooling -lxerces-c";
++      OPENSAML_LDFLAGS="-L$opensamldir/lib";
 +
 +
 +
++
++cat >>confdefs.h <<_ACEOF
++#define HAVE_OPENSAML 1
++_ACEOF
++
++fi
++fi
++
++ if test "x_$check_opensaml_dir" != "x_no"; then
++  OPENSAML_TRUE=
++  OPENSAML_FALSE='#'
++else
++  OPENSAML_TRUE='#'
++  OPENSAML_FALSE=
 +fi
 +
++
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Shibboleth resolver implementation" >&5
 +$as_echo_n "checking for Shibboleth resolver implementation... " >&6; }
 +SHIBRESOLVER_DIR=
 +found_shibresolver="no"
 +
 +# Check whether --with-shibresolver was given.
 +if test "${with_shibresolver+set}" = set; then :
 +  withval=$with_shibresolver; check_shibresolver_dir="$withval"
 +else
 +  check_shibresolver_dir=
 +fi
 +
++if test x_$check_shibresolver_dir != x_no; then
 +for dir in $check_shibresolver_dir $prefix /usr /usr/local ; do
 +   shibresolverdir="$dir"
 +   if test -f "$dir/include/shibresolver/resolver.h"; then
 +     found_shibresolver="yes";
 +     SHIBRESOLVER_DIR="${shibresolverdir}"
 +     SHIBRESOLVER_CXXFLAGS="-I$shibresolverdir/include";
 +     break;
 +   fi
 +done
++fi
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_shibresolver" >&5
 +$as_echo "$found_shibresolver" >&6; }
++if test x_$check_shibresolver_dir != x_no; then
 +if test x_$found_shibresolver != x_yes; then
-   Cannot find Shibboleth resolver libraries.
++   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING:
 +----------------------------------------------------------------------
- " "$LINENO" 5
++  Cannot find Shibboleth resolver libraries, building without
++  Shibboleth support.
 +
 +  Please install Shibboleth or specify installation directory with
 +  --with-shibresolver=(dir).
 +----------------------------------------------------------------------
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for radsec" >&5
++" >&5
++$as_echo "$as_me: WARNING:
++----------------------------------------------------------------------
++  Cannot find Shibboleth resolver libraries, building without
++  Shibboleth support.
++
++  Please install Shibboleth or specify installation directory with
++  --with-shibresolver=(dir).
++----------------------------------------------------------------------
++" >&2;}
 +else
 +      printf "Shibboleth resolver found in $shibresolverdir\n";
 +      SHIBRESOLVER_LIBS="-lshibresolver";
 +      SHIBRESOLVER_LDFLAGS="-L$shibresolverdir/lib";
 +
 +
 +
++
++cat >>confdefs.h <<_ACEOF
++#define HAVE_SHIBRESOLVER 1
++_ACEOF
++
++fi
++fi
++
++ if test "x_$check_shibresolver_dir" != "x_no"; then
++  SHIBRESOLVER_TRUE=
++  SHIBRESOLVER_FALSE='#'
++else
++  SHIBRESOLVER_TRUE='#'
++  SHIBRESOLVER_FALSE=
++fi
++
++if test x_$found_shibresolver = x_yes; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Shibboleth implementation" >&5
++$as_echo_n "checking for Shibboleth implementation... " >&6; }
++SHIBSP_DIR=
++found_shibsp="no"
++
++# Check whether --with-shibsp was given.
++if test "${with_shibsp+set}" = set; then :
++  withval=$with_shibsp; check_shibsp_dir="$withval"
++else
++  check_shibsp_dir=
++fi
++
++for dir in $check_shibsp_dir $prefix /usr /usr/local ; do
++   shibspdir="$dir"
++   if test -f "$dir/include/shibsp/SPConfig.h"; then
++     found_shibsp="yes";
++     SHIBSP_DIR="${shibspdir}"
++     SHIBSP_CXXFLAGS="-I$shibspdir/include";
++     break;
++   fi
++done
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_shibsp" >&5
++$as_echo "$found_shibsp" >&6; }
++if test x_$found_shibsp != x_yes; then
++   as_fn_error $? "
++----------------------------------------------------------------------
++  Cannot find Shibboleth libraries.
++
++  Please install Shibboleth or specify installation directory with
++  --with-shibsp=(dir).
++----------------------------------------------------------------------
++" "$LINENO" 5
++else
++      printf "Shibboleth found in $shibspdir\n";
++      SHIBSP_LIBS="-lshibsp -lsaml -lxml-security-c -lxmltooling -lxerces-c";
++      SHIBSP_LDFLAGS="-L$shibspdir/lib";
++
++
++
++
++cat >>confdefs.h <<_ACEOF
++#define HAVE_SHIBSP 1
++_ACEOF
++
++fi
++
 +fi
 +
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jansson" >&5
++if test "x$acceptor" = "xyes" ; then
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for radsec" >&5
 +$as_echo_n "checking for radsec... " >&6; }
 +RADSEC_DIR=
 +found_radsec="no"
 +
 +# Check whether --with-radsec was given.
 +if test "${with_radsec+set}" = set; then :
 +  withval=$with_radsec; check_radsec_dir="$withval"
 +else
 +  check_radsec_dir=
 +fi
 +
 +for dir in $check_radsec_dir $prefix /usr /usr/local ; do
 +   radsecdir="$dir"
 +   if test -f "$dir/include/radsec/radsec.h"; then
 +     found_radsec="yes";
 +     RADSEC_DIR="${radsecdir}"
 +     RADSEC_CFLAGS="-I$radsecdir/include";
 +     break;
 +   fi
 +done
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_radsec" >&5
 +$as_echo "$found_radsec" >&6; }
 +if test x_$found_radsec != x_yes; then
 +   as_fn_error $? "
 +----------------------------------------------------------------------
 +  Cannot find radsec libraries.
 +
 +  Please install libradsec or specify installation directory with
 +  --with-radsec=(dir).
 +----------------------------------------------------------------------
 +" "$LINENO" 5
 +else
 +      printf "radsec found in $radsecdir\n";
 +      RADSEC_LIBS="-lradsec";
 +      RADSEC_LDFLAGS="-L$radsecdir/lib";
 +
 +
 +
 +fi
 +
- ac_config_files="$ac_config_files Makefile libeap/Makefile mech_eap/Makefile"
++  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jansson" >&5
 +$as_echo_n "checking for jansson... " >&6; }
 +JANSSON_DIR=
 +found_jansson="no"
 +
 +# Check whether --with-jansson was given.
 +if test "${with_jansson+set}" = set; then :
 +  withval=$with_jansson; check_jansson_dir="$withval"
 +else
 +  check_jansson_dir=
 +fi
 +
 +for dir in $check_jansson_dir $prefix /usr /usr/local ; do
 +   janssondir="$dir"
 +   if test -f "$dir/include/jansson.h"; then
 +     found_jansson="yes";
 +     JANSSON_DIR="${janssondir}"
 +     JANSSON_CFLAGS="-I$janssondir/include";
 +     break;
 +   fi
 +done
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_jansson" >&5
 +$as_echo "$found_jansson" >&6; }
 +if test x_$found_jansson != x_yes; then
 +   as_fn_error $? "
 +----------------------------------------------------------------------
 +  Cannot find jansson libraries.
 +
 +  Please install libjansson or specify installation directory with
 +  --with-jansson=(dir).
 +----------------------------------------------------------------------
 +" "$LINENO" 5
 +else
 +      printf "jansson found in $janssondir\n";
 +      JANSSON_LIBS="-ljansson";
 +      JANSSON_LDFLAGS="-L$janssondir/lib";
 +
 +
 +
 +fi
 +
-  if test -n "$EXEEXT"; then
-   am__EXEEXT_TRUE=
-   am__EXEEXT_FALSE='#'
- else
-   am__EXEEXT_TRUE='#'
-   am__EXEEXT_FALSE=
- fi
- 
++fi
++
++{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Moonshot identity selector implementation" >&5
++$as_echo_n "checking for Moonshot identity selector implementation... " >&6; }
++LIBMOONSHOT_DIR=
++LIBMOONSHOT_CFLAGS=
++LIBMOONSHOT_LDFLAGS=
++LIBMOONSHOT_LIBS=
++found_libmoonshot="no"
++
++# Check whether --with-libmoonshot was given.
++if test "${with_libmoonshot+set}" = set; then :
++  withval=$with_libmoonshot; check_libmoonshot_dir="$withval"
++else
++  check_libmoonshot_dir=
++fi
++
++for dir in $check_libmoonshot_dir $prefix /usr /usr/local ; do
++   libmoonshotdir="$dir"
++   if test -f "$dir/include/libmoonshot.h"; then
++     found_libmoonshot="yes";
++     LIBMOONSHOT_DIR="${libmoonshotdir}"
++     LIBMOONSHOT_CFLAGS="-I$libmoonshotdir/include";
++     break;
++   fi
++done
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $found_libmoonshot" >&5
++$as_echo "$found_libmoonshot" >&6; }
++if test x_$found_libmoonshot = x_yes; then
++    printf "libmoonshot found in $libmoonshotdir\n";
++    LIBMOONSHOT_LIBS="-lmoonshot";
++    LIBMOONSHOT_LDFLAGS="-L$libmoonshot/lib";
++    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for moonshot_get_identity in -lmoonshot" >&5
++$as_echo_n "checking for moonshot_get_identity in -lmoonshot... " >&6; }
++if test "${ac_cv_lib_moonshot_moonshot_get_identity+set}" = set; then :
++  $as_echo_n "(cached) " >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-lmoonshot "$LIBMOONSHOT_LIBS" $LIBS"
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++
++/* Override any GCC internal prototype to avoid an error.
++   Use char because int might match the return type of a GCC
++   builtin and then its argument prototype would still apply.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++char moonshot_get_identity ();
++int
++main ()
++{
++return moonshot_get_identity ();
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_link "$LINENO"; then :
++  ac_cv_lib_moonshot_moonshot_get_identity=yes
++else
++  ac_cv_lib_moonshot_moonshot_get_identity=no
++fi
++rm -f core conftest.err conftest.$ac_objext \
++    conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_moonshot_moonshot_get_identity" >&5
++$as_echo "$ac_cv_lib_moonshot_moonshot_get_identity" >&6; }
++if test "x$ac_cv_lib_moonshot_moonshot_get_identity" = x""yes; then :
++
++cat >>confdefs.h <<_ACEOF
++#define HAVE_MOONSHOT_GET_IDENTITY 1
++_ACEOF
++
++fi
++
++fi
++
++
++
++     if test "x$found_libmoonshot" != "xno"; then
++  LIBMOONSHOT_TRUE=
++  LIBMOONSHOT_FALSE='#'
++else
++  LIBMOONSHOT_TRUE='#'
++  LIBMOONSHOT_FALSE=
++fi
++
++
++ac_config_files="$ac_config_files Makefile libeap/Makefile mech_eap/Makefile mech_eap.spec"
 +
 +cat >confcache <<\_ACEOF
 +# This file is a shell script that caches the results of configure
 +# tests run on this system so they can be shared between configure
 +# scripts and configure runs, see configure's option --config-cache.
 +# It is not useful on other systems.  If it contains results you don't
 +# want to keep, you may remove or edit it.
 +#
 +# config.status only pays attention to the cache file if you give it
 +# the --recheck option to rerun configure.
 +#
 +# `ac_cv_env_foo' variables (set or unset) will be overridden when
 +# loading this file, other *unset* `ac_cv_foo' will be assigned the
 +# following values.
 +
 +_ACEOF
 +
 +# The following way of writing the cache mishandles newlines in values,
 +# but we know of no workaround that is simple, portable, and efficient.
 +# So, we kill variables containing newlines.
 +# Ultrix sh set writes to stderr and can't be redirected directly,
 +# and sets the high bit in the cache file unless we assign to the vars.
 +(
 +  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
 +    eval ac_val=\$$ac_var
 +    case $ac_val in #(
 +    *${as_nl}*)
 +      case $ac_var in #(
 +      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
 +      esac
 +      case $ac_var in #(
 +      _ | IFS | as_nl) ;; #(
 +      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
 +      *) { eval $ac_var=; unset $ac_var;} ;;
 +      esac ;;
 +    esac
 +  done
 +
 +  (set) 2>&1 |
 +    case $as_nl`(ac_space=' '; set) 2>&1` in #(
 +    *${as_nl}ac_space=\ *)
 +      # `set' does not quote correctly, so add quotes: double-quote
 +      # substitution turns \\\\ into \\, and sed turns \\ into \.
 +      sed -n \
 +      "s/'/'\\\\''/g;
 +        s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
 +      ;; #(
 +    *)
 +      # `set' quotes correctly as required by POSIX, so do not add quotes.
 +      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
 +      ;;
 +    esac |
 +    sort
 +) |
 +  sed '
 +     /^ac_cv_env_/b end
 +     t clear
 +     :clear
 +     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
 +     t end
 +     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
 +     :end' >>confcache
 +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
 +  if test -w "$cache_file"; then
 +    test "x$cache_file" != "x/dev/null" &&
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 +$as_echo "$as_me: updating cache $cache_file" >&6;}
 +    cat confcache >$cache_file
 +  else
 +    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
 +  fi
 +fi
 +rm -f confcache
 +
 +test "x$prefix" = xNONE && prefix=$ac_default_prefix
 +# Let make expand exec_prefix.
 +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 +
 +DEFS=-DHAVE_CONFIG_H
 +
 +ac_libobjs=
 +ac_ltlibobjs=
 +U=
 +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
 +  # 1. Remove the extension, and $U if already installed.
 +  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
 +  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
 +  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
 +  #    will be set to the directory where LIBOBJS objects are built.
 +  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
 +  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
 +done
 +LIBOBJS=$ac_libobjs
 +
 +LTLIBOBJS=$ac_ltlibobjs
 +
 +
- if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-   as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
 +  as_fn_error $? "conditional \"AMDEP\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
 +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
 +  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
- OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
++ if test -n "$EXEEXT"; then
++  am__EXEEXT_TRUE=
++  am__EXEEXT_FALSE='#'
++else
++  am__EXEEXT_TRUE='#'
++  am__EXEEXT_FALSE=
++fi
++
++if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
++  as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
 +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
 +  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
 +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
 +  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
 +if test -z "${GSSEAP_ENABLE_REAUTH_TRUE}" && test -z "${GSSEAP_ENABLE_REAUTH_FALSE}"; then
 +  as_fn_error $? "conditional \"GSSEAP_ENABLE_REAUTH\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
++if test -z "${GSSEAP_ENABLE_ACCEPTOR_TRUE}" && test -z "${GSSEAP_ENABLE_ACCEPTOR_FALSE}"; then
++  as_fn_error $? "conditional \"GSSEAP_ENABLE_ACCEPTOR\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${TARGET_WINDOWS_TRUE}" && test -z "${TARGET_WINDOWS_FALSE}"; then
++  as_fn_error $? "conditional \"TARGET_WINDOWS\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
 +if test -z "${HEIMDAL_TRUE}" && test -z "${HEIMDAL_FALSE}"; then
 +  as_fn_error $? "conditional \"HEIMDAL\" was never defined.
 +Usually this means the macro was only invoked conditionally." "$LINENO" 5
 +fi
++if test -z "${OPENSAML_TRUE}" && test -z "${OPENSAML_FALSE}"; then
++  as_fn_error $? "conditional \"OPENSAML\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${SHIBRESOLVER_TRUE}" && test -z "${SHIBRESOLVER_FALSE}"; then
++  as_fn_error $? "conditional \"SHIBRESOLVER\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
++if test -z "${LIBMOONSHOT_TRUE}" && test -z "${LIBMOONSHOT_FALSE}"; then
++  as_fn_error $? "conditional \"LIBMOONSHOT\" was never defined.
++Usually this means the macro was only invoked conditionally." "$LINENO" 5
++fi
 +
 +: ${CONFIG_STATUS=./config.status}
 +ac_write_fail=0
 +ac_clean_files_save=$ac_clean_files
 +ac_clean_files="$ac_clean_files $CONFIG_STATUS"
 +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
 +as_write_fail=0
 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
 +#! $SHELL
 +# Generated by $as_me.
 +# Run this file to recreate the current configuration.
 +# Compiler output produced by configure, useful for debugging
 +# configure, is in config.log if it exists.
 +
 +debug=false
 +ac_cs_recheck=false
 +ac_cs_silent=false
 +
 +SHELL=\${CONFIG_SHELL-$SHELL}
 +export SHELL
 +_ASEOF
 +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
 +## -------------------- ##
 +## M4sh Initialization. ##
 +## -------------------- ##
 +
 +# Be more Bourne compatible
 +DUALCASE=1; export DUALCASE # for MKS sh
 +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
 +  emulate sh
 +  NULLCMD=:
 +  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
 +  # is contrary to our usage.  Disable this feature.
 +  alias -g '${1+"$@"}'='"$@"'
 +  setopt NO_GLOB_SUBST
 +else
 +  case `(set -o) 2>/dev/null` in #(
 +  *posix*) :
 +    set -o posix ;; #(
 +  *) :
 +     ;;
 +esac
 +fi
 +
 +
 +as_nl='
 +'
 +export as_nl
 +# Printing a long string crashes Solaris 7 /usr/bin/printf.
 +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
 +# Prefer a ksh shell builtin over an external printf program on Solaris,
 +# but without wasting forks for bash or zsh.
 +if test -z "$BASH_VERSION$ZSH_VERSION" \
 +    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
 +  as_echo='print -r --'
 +  as_echo_n='print -rn --'
 +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
 +  as_echo='printf %s\n'
 +  as_echo_n='printf %s'
 +else
 +  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
 +    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
 +    as_echo_n='/usr/ucb/echo -n'
 +  else
 +    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
 +    as_echo_n_body='eval
 +      arg=$1;
 +      case $arg in #(
 +      *"$as_nl"*)
 +      expr "X$arg" : "X\\(.*\\)$as_nl";
 +      arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
 +      esac;
 +      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
 +    '
 +    export as_echo_n_body
 +    as_echo_n='sh -c $as_echo_n_body as_echo'
 +  fi
 +  export as_echo_body
 +  as_echo='sh -c $as_echo_body as_echo'
 +fi
 +
 +# The user is always right.
 +if test "${PATH_SEPARATOR+set}" != set; then
 +  PATH_SEPARATOR=:
 +  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
 +    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
 +      PATH_SEPARATOR=';'
 +  }
 +fi
 +
 +
 +# IFS
 +# We need space, tab and new line, in precisely that order.  Quoting is
 +# there to prevent editors from complaining about space-tab.
 +# (If _AS_PATH_WALK were called with IFS unset, it would disable word
 +# splitting by setting IFS to empty value.)
 +IFS=" ""      $as_nl"
 +
 +# Find who we are.  Look in the path if we contain no directory separator.
 +case $0 in #((
 +  *[\\/]* ) as_myself=$0 ;;
 +  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 +for as_dir in $PATH
 +do
 +  IFS=$as_save_IFS
 +  test -z "$as_dir" && as_dir=.
 +    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
 +  done
 +IFS=$as_save_IFS
 +
 +     ;;
 +esac
 +# We did not find ourselves, most probably we were run as `sh COMMAND'
 +# in which case we are not to be found in the path.
 +if test "x$as_myself" = x; then
 +  as_myself=$0
 +fi
 +if test ! -f "$as_myself"; then
 +  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
 +  exit 1
 +fi
 +
 +# Unset variables that we do not need and which cause bugs (e.g. in
 +# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
 +# suppresses any "Segmentation fault" message there.  '((' could
 +# trigger a bug in pdksh 5.2.14.
 +for as_var in BASH_ENV ENV MAIL MAILPATH
 +do eval test x\${$as_var+set} = xset \
 +  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 +done
 +PS1='$ '
 +PS2='> '
 +PS4='+ '
 +
 +# NLS nuisances.
 +LC_ALL=C
 +export LC_ALL
 +LANGUAGE=C
 +export LANGUAGE
 +
 +# CDPATH.
 +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 +
 +
 +# as_fn_error STATUS ERROR [LINENO LOG_FD]
 +# ----------------------------------------
 +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
 +# script with STATUS, using 1 if that was 0.
 +as_fn_error ()
 +{
 +  as_status=$1; test $as_status -eq 0 && as_status=1
 +  if test "$4"; then
 +    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
 +    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
 +  fi
 +  $as_echo "$as_me: error: $2" >&2
 +  as_fn_exit $as_status
 +} # as_fn_error
 +
 +
 +# as_fn_set_status STATUS
 +# -----------------------
 +# Set $? to STATUS, without forking.
 +as_fn_set_status ()
 +{
 +  return $1
 +} # as_fn_set_status
 +
 +# as_fn_exit STATUS
 +# -----------------
 +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
 +as_fn_exit ()
 +{
 +  set +e
 +  as_fn_set_status $1
 +  exit $1
 +} # as_fn_exit
 +
 +# as_fn_unset VAR
 +# ---------------
 +# Portably unset VAR.
 +as_fn_unset ()
 +{
 +  { eval $1=; unset $1;}
 +}
 +as_unset=as_fn_unset
 +# as_fn_append VAR VALUE
 +# ----------------------
 +# Append the text in VALUE to the end of the definition contained in VAR. Take
 +# advantage of any shell optimizations that allow amortized linear growth over
 +# repeated appends, instead of the typical quadratic growth present in naive
 +# implementations.
 +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
 +  eval 'as_fn_append ()
 +  {
 +    eval $1+=\$2
 +  }'
 +else
 +  as_fn_append ()
 +  {
 +    eval $1=\$$1\$2
 +  }
 +fi # as_fn_append
 +
 +# as_fn_arith ARG...
 +# ------------------
 +# Perform arithmetic evaluation on the ARGs, and store the result in the
 +# global $as_val. Take advantage of shells that can avoid forks. The arguments
 +# must be portable across $(()) and expr.
 +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
 +  eval 'as_fn_arith ()
 +  {
 +    as_val=$(( $* ))
 +  }'
 +else
 +  as_fn_arith ()
 +  {
 +    as_val=`expr "$@" || test $? -eq 1`
 +  }
 +fi # as_fn_arith
 +
 +
 +if expr a : '\(a\)' >/dev/null 2>&1 &&
 +   test "X`expr 00001 : '.*\(...\)'`" = X001; then
 +  as_expr=expr
 +else
 +  as_expr=false
 +fi
 +
 +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
 +  as_basename=basename
 +else
 +  as_basename=false
 +fi
 +
 +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
 +  as_dirname=dirname
 +else
 +  as_dirname=false
 +fi
 +
 +as_me=`$as_basename -- "$0" ||
 +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 +       X"$0" : 'X\(//\)$' \| \
 +       X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X/"$0" |
 +    sed '/^.*\/\([^/][^/]*\)\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\/\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\/\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +
 +# Avoid depending upon Character Ranges.
 +as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
 +as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 +as_cr_digits='0123456789'
 +as_cr_alnum=$as_cr_Letters$as_cr_digits
 +
 +ECHO_C= ECHO_N= ECHO_T=
 +case `echo -n x` in #(((((
 +-n*)
 +  case `echo 'xy\c'` in
 +  *c*) ECHO_T='       ';;     # ECHO_T is single tab character.
 +  xy)  ECHO_C='\c';;
 +  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
 +       ECHO_T='       ';;
 +  esac;;
 +*)
 +  ECHO_N='-n';;
 +esac
 +
 +rm -f conf$$ conf$$.exe conf$$.file
 +if test -d conf$$.dir; then
 +  rm -f conf$$.dir/conf$$.file
 +else
 +  rm -f conf$$.dir
 +  mkdir conf$$.dir 2>/dev/null
 +fi
 +if (echo >conf$$.file) 2>/dev/null; then
 +  if ln -s conf$$.file conf$$ 2>/dev/null; then
 +    as_ln_s='ln -s'
 +    # ... but there are two gotchas:
 +    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
 +    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
 +    # In both cases, we have to default to `cp -p'.
 +    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
 +      as_ln_s='cp -p'
 +  elif ln conf$$.file conf$$ 2>/dev/null; then
 +    as_ln_s=ln
 +  else
 +    as_ln_s='cp -p'
 +  fi
 +else
 +  as_ln_s='cp -p'
 +fi
 +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 +rmdir conf$$.dir 2>/dev/null
 +
 +
 +# as_fn_mkdir_p
 +# -------------
 +# Create "$as_dir" as a directory, including parents if necessary.
 +as_fn_mkdir_p ()
 +{
 +
 +  case $as_dir in #(
 +  -*) as_dir=./$as_dir;;
 +  esac
 +  test -d "$as_dir" || eval $as_mkdir_p || {
 +    as_dirs=
 +    while :; do
 +      case $as_dir in #(
 +      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
 +      *) as_qdir=$as_dir;;
 +      esac
 +      as_dirs="'$as_qdir' $as_dirs"
 +      as_dir=`$as_dirname -- "$as_dir" ||
 +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$as_dir" : 'X\(//\)[^/]' \| \
 +       X"$as_dir" : 'X\(//\)$' \| \
 +       X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$as_dir" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +      test -d "$as_dir" && break
 +    done
 +    test -z "$as_dirs" || eval "mkdir $as_dirs"
 +  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 +
 +
 +} # as_fn_mkdir_p
 +if mkdir -p . 2>/dev/null; then
 +  as_mkdir_p='mkdir -p "$as_dir"'
 +else
 +  test -d ./-p && rmdir ./-p
 +  as_mkdir_p=false
 +fi
 +
 +if test -x / >/dev/null 2>&1; then
 +  as_test_x='test -x'
 +else
 +  if ls -dL / >/dev/null 2>&1; then
 +    as_ls_L_option=L
 +  else
 +    as_ls_L_option=
 +  fi
 +  as_test_x='
 +    eval sh -c '\''
 +      if test -d "$1"; then
 +      test -d "$1/.";
 +      else
 +      case $1 in #(
 +      -*)set "./$1";;
 +      esac;
 +      case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 +      ???[sx]*):;;*)false;;esac;fi
 +    '\'' sh
 +  '
 +fi
 +as_executable_p=$as_test_x
 +
 +# Sed expression to map a string onto a valid CPP name.
 +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 +
 +# Sed expression to map a string onto a valid variable name.
 +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 +
 +
 +exec 6>&1
 +## ----------------------------------- ##
 +## Main body of $CONFIG_STATUS script. ##
 +## ----------------------------------- ##
 +_ASEOF
 +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +# Save the log message, to keep $0 and so on meaningful, and to
 +# report actual input values of CONFIG_FILES etc. instead of their
 +# values after options handling.
 +ac_log="
 +This file was extended by mech_eap $as_me 0.1, which was
 +generated by GNU Autoconf 2.67.  Invocation command line was
 +
 +  CONFIG_FILES    = $CONFIG_FILES
 +  CONFIG_HEADERS  = $CONFIG_HEADERS
 +  CONFIG_LINKS    = $CONFIG_LINKS
 +  CONFIG_COMMANDS = $CONFIG_COMMANDS
 +  $ $0 $@
 +
 +on `(hostname || uname -n) 2>/dev/null | sed 1q`
 +"
 +
 +_ACEOF
 +
 +case $ac_config_files in *"
 +"*) set x $ac_config_files; shift; ac_config_files=$*;;
 +esac
 +
 +case $ac_config_headers in *"
 +"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
 +esac
 +
 +
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +# Files that config.status was made for.
 +config_files="$ac_config_files"
 +config_headers="$ac_config_headers"
 +config_commands="$ac_config_commands"
 +
 +_ACEOF
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +ac_cs_usage="\
 +\`$as_me' instantiates files and other configuration actions
 +from templates according to the current configuration.  Unless the files
 +and actions are specified as TAGs, all are instantiated by default.
 +
 +Usage: $0 [OPTION]... [TAG]...
 +
 +  -h, --help       print this help, then exit
 +  -V, --version    print version number and configuration settings, then exit
 +      --config     print configuration, then exit
 +  -q, --quiet, --silent
 +                   do not print progress messages
 +  -d, --debug      don't remove temporary files
 +      --recheck    update $as_me by reconfiguring in the same conditions
 +      --file=FILE[:TEMPLATE]
 +                   instantiate the configuration file FILE
 +      --header=FILE[:TEMPLATE]
 +                   instantiate the configuration header FILE
 +
 +Configuration files:
 +$config_files
 +
 +Configuration headers:
 +$config_headers
 +
 +Configuration commands:
 +$config_commands
 +
 +Report bugs to <bugs@project-moonshot.org>."
 +
 +_ACEOF
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 +ac_cs_version="\\
 +mech_eap config.status 0.1
 +configured by $0, generated by GNU Autoconf 2.67,
 +  with options \\"\$ac_cs_config\\"
 +
 +Copyright (C) 2010 Free Software Foundation, Inc.
 +This config.status script is free software; the Free Software Foundation
 +gives unlimited permission to copy, distribute and modify it."
 +
 +ac_pwd='$ac_pwd'
 +srcdir='$srcdir'
 +INSTALL='$INSTALL'
 +MKDIR_P='$MKDIR_P'
 +AWK='$AWK'
 +test -n "\$AWK" || AWK=awk
 +_ACEOF
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +# The default lists apply if the user does not specify any file.
 +ac_need_defaults=:
 +while test $# != 0
 +do
 +  case $1 in
 +  --*=?*)
 +    ac_option=`expr "X$1" : 'X\([^=]*\)='`
 +    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
 +    ac_shift=:
 +    ;;
 +  --*=)
 +    ac_option=`expr "X$1" : 'X\([^=]*\)='`
 +    ac_optarg=
 +    ac_shift=:
 +    ;;
 +  *)
 +    ac_option=$1
 +    ac_optarg=$2
 +    ac_shift=shift
 +    ;;
 +  esac
 +
 +  case $ac_option in
 +  # Handling of the options.
 +  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
 +    ac_cs_recheck=: ;;
 +  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
 +    $as_echo "$ac_cs_version"; exit ;;
 +  --config | --confi | --conf | --con | --co | --c )
 +    $as_echo "$ac_cs_config"; exit ;;
 +  --debug | --debu | --deb | --de | --d | -d )
 +    debug=: ;;
 +  --file | --fil | --fi | --f )
 +    $ac_shift
 +    case $ac_optarg in
 +    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
 +    '') as_fn_error $? "missing file argument" ;;
 +    esac
 +    as_fn_append CONFIG_FILES " '$ac_optarg'"
 +    ac_need_defaults=false;;
 +  --header | --heade | --head | --hea )
 +    $ac_shift
 +    case $ac_optarg in
 +    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
 +    esac
 +    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
 +    ac_need_defaults=false;;
 +  --he | --h)
 +    # Conflict between --help and --header
 +    as_fn_error $? "ambiguous option: \`$1'
 +Try \`$0 --help' for more information.";;
 +  --help | --hel | -h )
 +    $as_echo "$ac_cs_usage"; exit ;;
 +  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
 +  | -silent | --silent | --silen | --sile | --sil | --si | --s)
 +    ac_cs_silent=: ;;
 +
 +  # This is an error.
 +  -*) as_fn_error $? "unrecognized option: \`$1'
 +Try \`$0 --help' for more information." ;;
 +
 +  *) as_fn_append ac_config_targets " $1"
 +     ac_need_defaults=false ;;
 +
 +  esac
 +  shift
 +done
 +
 +ac_configure_extra_args=
 +
 +if $ac_cs_silent; then
 +  exec 6>/dev/null
 +  ac_configure_extra_args="$ac_configure_extra_args --silent"
 +fi
 +
 +_ACEOF
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +if \$ac_cs_recheck; then
 +  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 +  shift
 +  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
 +  CONFIG_SHELL='$SHELL'
 +  export CONFIG_SHELL
 +  exec "\$@"
 +fi
 +
 +_ACEOF
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +exec 5>>config.log
 +{
 +  echo
 +  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
 +## Running $as_me. ##
 +_ASBOX
 +  $as_echo "$ac_log"
 +} >&5
 +
 +_ACEOF
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +#
 +# INIT-COMMANDS
 +#
 +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 +
 +
 +# The HP-UX ksh and POSIX shell print the target directory to stdout
 +# if CDPATH is set.
 +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 +
 +sed_quote_subst='$sed_quote_subst'
 +double_quote_subst='$double_quote_subst'
 +delay_variable_subst='$delay_variable_subst'
 +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
 +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
++AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
++DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
++OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
 +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
 +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
 +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
 +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
 +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
 +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
 +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
 +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
 +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
 +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
 +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
 +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
 +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
 +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
 +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
 +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
 +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
 +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
 +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
 +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
- OBJDUMP \
 +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
 +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
 +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
 +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
 +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
 +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
 +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
 +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
 +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
 +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
 +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
 +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
 +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
 +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
 +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
 +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
 +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
 +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
 +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
 +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
 +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
 +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
 +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
 +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
 +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
 +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
 +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
 +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
 +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
 +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
 +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
 +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
 +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
 +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
 +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
 +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
 +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
 +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
 +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
 +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
 +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
 +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
 +predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
 +postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
 +predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
 +postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
 +LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
 +
 +LTCC='$LTCC'
 +LTCFLAGS='$LTCFLAGS'
 +compiler='$compiler_DEFAULT'
 +
 +# Quote evaled strings.
 +for var in SED \
 +GREP \
 +EGREP \
 +FGREP \
 +LD \
 +NM \
 +LN_S \
 +lt_SP2NL \
 +lt_NL2SP \
 +reload_flag \
- # An object symbol dumper.
- OBJDUMP=$lt_OBJDUMP
- 
 +deplibs_check_method \
 +file_magic_cmd \
 +AR \
 +AR_FLAGS \
 +STRIP \
 +RANLIB \
 +CC \
 +CFLAGS \
 +compiler \
 +lt_cv_sys_global_symbol_pipe \
 +lt_cv_sys_global_symbol_to_cdecl \
 +lt_cv_sys_global_symbol_to_c_name_address \
 +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
 +SHELL \
 +ECHO \
 +lt_prog_compiler_no_builtin_flag \
 +lt_prog_compiler_wl \
 +lt_prog_compiler_pic \
 +lt_prog_compiler_static \
 +lt_cv_prog_compiler_c_o \
 +need_locks \
 +DSYMUTIL \
 +NMEDIT \
 +LIPO \
 +OTOOL \
 +OTOOL64 \
 +shrext_cmds \
 +export_dynamic_flag_spec \
 +whole_archive_flag_spec \
 +compiler_needs_object \
 +with_gnu_ld \
 +allow_undefined_flag \
 +no_undefined_flag \
 +hardcode_libdir_flag_spec \
 +hardcode_libdir_flag_spec_ld \
 +hardcode_libdir_separator \
 +fix_srcfile_path \
 +exclude_expsyms \
 +include_expsyms \
 +file_list_spec \
 +variables_saved_for_relink \
 +libname_spec \
 +library_names_spec \
 +soname_spec \
 +finish_eval \
 +old_striplib \
 +striplib \
 +compiler_lib_search_dirs \
 +predep_objects \
 +postdep_objects \
 +predeps \
 +postdeps \
 +compiler_lib_search_path \
 +LD_CXX \
 +compiler_CXX \
 +lt_prog_compiler_no_builtin_flag_CXX \
 +lt_prog_compiler_wl_CXX \
 +lt_prog_compiler_pic_CXX \
 +lt_prog_compiler_static_CXX \
 +lt_cv_prog_compiler_c_o_CXX \
 +export_dynamic_flag_spec_CXX \
 +whole_archive_flag_spec_CXX \
 +compiler_needs_object_CXX \
 +with_gnu_ld_CXX \
 +allow_undefined_flag_CXX \
 +no_undefined_flag_CXX \
 +hardcode_libdir_flag_spec_CXX \
 +hardcode_libdir_flag_spec_ld_CXX \
 +hardcode_libdir_separator_CXX \
 +fix_srcfile_path_CXX \
 +exclude_expsyms_CXX \
 +include_expsyms_CXX \
 +file_list_spec_CXX \
 +compiler_lib_search_dirs_CXX \
 +predep_objects_CXX \
 +postdep_objects_CXX \
 +predeps_CXX \
 +postdeps_CXX \
 +compiler_lib_search_path_CXX; do
 +    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
 +    *[\\\\\\\`\\"\\\$]*)
 +      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
 +      ;;
 +    *)
 +      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
 +      ;;
 +    esac
 +done
 +
 +# Double-quote double-evaled strings.
 +for var in reload_cmds \
 +old_postinstall_cmds \
 +old_postuninstall_cmds \
 +old_archive_cmds \
 +extract_expsyms_cmds \
 +old_archive_from_new_cmds \
 +old_archive_from_expsyms_cmds \
 +archive_cmds \
 +archive_expsym_cmds \
 +module_cmds \
 +module_expsym_cmds \
 +export_symbols_cmds \
 +prelink_cmds \
 +postinstall_cmds \
 +postuninstall_cmds \
 +finish_cmds \
 +sys_lib_search_path_spec \
 +sys_lib_dlsearch_path_spec \
 +old_archive_cmds_CXX \
 +old_archive_from_new_cmds_CXX \
 +old_archive_from_expsyms_cmds_CXX \
 +archive_cmds_CXX \
 +archive_expsym_cmds_CXX \
 +module_cmds_CXX \
 +module_expsym_cmds_CXX \
 +export_symbols_cmds_CXX \
 +prelink_cmds_CXX; do
 +    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
 +    *[\\\\\\\`\\"\\\$]*)
 +      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
 +      ;;
 +    *)
 +      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
 +      ;;
 +    esac
 +done
 +
 +# Fix-up fallback echo if it was mangled by the above quoting rules.
 +case \$lt_ECHO in
 +*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
 +  ;;
 +esac
 +
 +ac_aux_dir='$ac_aux_dir'
 +xsi_shell='$xsi_shell'
 +lt_shell_append='$lt_shell_append'
 +
 +# See if we are running on zsh, and set the options which allow our
 +# commands through without removal of \ escapes INIT.
 +if test -n "\${ZSH_VERSION+set}" ; then
 +   setopt NO_GLOB_SUBST
 +fi
 +
 +
 +    PACKAGE='$PACKAGE'
 +    VERSION='$VERSION'
 +    TIMESTAMP='$TIMESTAMP'
 +    RM='$RM'
 +    ofile='$ofile'
 +
 +
 +
 +
 +
 +
 +_ACEOF
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +
 +# Handling of arguments.
 +for ac_config_target in $ac_config_targets
 +do
 +  case $ac_config_target in
 +    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
 +    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
 +    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
 +    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
 +    "libeap/Makefile") CONFIG_FILES="$CONFIG_FILES libeap/Makefile" ;;
 +    "mech_eap/Makefile") CONFIG_FILES="$CONFIG_FILES mech_eap/Makefile" ;;
++    "mech_eap.spec") CONFIG_FILES="$CONFIG_FILES mech_eap.spec" ;;
 +
 +  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
 +  esac
 +done
 +
 +
 +# If the user did not use the arguments to specify the items to instantiate,
 +# then the envvar interface is used.  Set only those that are not.
 +# We use the long form for the default assignment because of an extremely
 +# bizarre bug on SunOS 4.1.3.
 +if $ac_need_defaults; then
 +  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
 +  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
 +  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 +fi
 +
 +# Have a temporary directory for convenience.  Make it in the build tree
 +# simply because there is no reason against having it here, and in addition,
 +# creating and moving files from /tmp can sometimes cause problems.
 +# Hook for its removal unless debugging.
 +# Note that there is a small window in which the directory will not be cleaned:
 +# after its creation but before its name has been assigned to `$tmp'.
 +$debug ||
 +{
 +  tmp=
 +  trap 'exit_status=$?
 +  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
 +' 0
 +  trap 'as_fn_exit 1' 1 2 13 15
 +}
 +# Create a (secure) tmp directory for tmp files.
 +
 +{
 +  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
 +  test -n "$tmp" && test -d "$tmp"
 +}  ||
 +{
 +  tmp=./conf$$-$RANDOM
 +  (umask 077 && mkdir "$tmp")
 +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
 +
 +# Set up the scripts for CONFIG_FILES section.
 +# No need to generate them if there are no CONFIG_FILES.
 +# This happens for instance with `./config.status config.h'.
 +if test -n "$CONFIG_FILES"; then
 +
 +
 +ac_cr=`echo X | tr X '\015'`
 +# On cygwin, bash can eat \r inside `` if the user requested igncr.
 +# But we know of no other shell where ac_cr would be empty at this
 +# point, so we can use a bashism as a fallback.
 +if test "x$ac_cr" = x; then
 +  eval ac_cr=\$\'\\r\'
 +fi
 +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
 +  ac_cs_awk_cr='\\r'
 +else
 +  ac_cs_awk_cr=$ac_cr
 +fi
 +
 +echo 'BEGIN {' >"$tmp/subs1.awk" &&
 +_ACEOF
 +
 +
 +{
 +  echo "cat >conf$$subs.awk <<_ACEOF" &&
 +  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
 +  echo "_ACEOF"
 +} >conf$$subs.sh ||
 +  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
 +ac_delim='%!_!# '
 +for ac_last_try in false false false false false :; do
 +  . ./conf$$subs.sh ||
 +    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 +
 +  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
 +  if test $ac_delim_n = $ac_delim_num; then
 +    break
 +  elif $ac_last_try; then
 +    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 +  else
 +    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
 +  fi
 +done
 +rm -f conf$$subs.sh
 +
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
 +_ACEOF
 +sed -n '
 +h
 +s/^/S["/; s/!.*/"]=/
 +p
 +g
 +s/^[^!]*!//
 +:repl
 +t repl
 +s/'"$ac_delim"'$//
 +t delim
 +:nl
 +h
 +s/\(.\{148\}\)..*/\1/
 +t more1
 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
 +p
 +n
 +b repl
 +:more1
 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/
 +p
 +g
 +s/.\{148\}//
 +t nl
 +:delim
 +h
 +s/\(.\{148\}\)..*/\1/
 +t more2
 +s/["\\]/\\&/g; s/^/"/; s/$/"/
 +p
 +b
 +:more2
 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/
 +p
 +g
 +s/.\{148\}//
 +t delim
 +' <conf$$subs.awk | sed '
 +/^[^""]/{
 +  N
 +  s/\n//
 +}
 +' >>$CONFIG_STATUS || ac_write_fail=1
 +rm -f conf$$subs.awk
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +_ACAWK
 +cat >>"\$tmp/subs1.awk" <<_ACAWK &&
 +  for (key in S) S_is_set[key] = 1
 +  FS = "\a"
 +
 +}
 +{
 +  line = $ 0
 +  nfields = split(line, field, "@")
 +  substed = 0
 +  len = length(field[1])
 +  for (i = 2; i < nfields; i++) {
 +    key = field[i]
 +    keylen = length(key)
 +    if (S_is_set[key]) {
 +      value = S[key]
 +      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
 +      len += length(value) + length(field[++i])
 +      substed = 1
 +    } else
 +      len += 1 + keylen
 +  }
 +
 +  print line
 +}
 +
 +_ACAWK
 +_ACEOF
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
 +  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 +else
 +  cat
 +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
 +  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 +_ACEOF
 +
 +# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
 +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
 +# trailing colons and then remove the whole line if VPATH becomes empty
 +# (actually we leave an empty line to preserve line numbers).
 +if test "x$srcdir" = x.; then
 +  ac_vpsub='/^[        ]*VPATH[        ]*=[    ]*/{
 +h
 +s///
 +s/^/:/
 +s/[    ]*$/:/
 +s/:\$(srcdir):/:/g
 +s/:\${srcdir}:/:/g
 +s/:@srcdir@:/:/g
 +s/^:*//
 +s/:*$//
 +x
 +s/\(=[         ]*\).*/\1/
 +G
 +s/\n//
 +s/^[^=]*=[     ]*$//
 +}'
 +fi
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +fi # test -n "$CONFIG_FILES"
 +
 +# Set up the scripts for CONFIG_HEADERS section.
 +# No need to generate them if there are no CONFIG_HEADERS.
 +# This happens for instance with `./config.status Makefile'.
 +if test -n "$CONFIG_HEADERS"; then
 +cat >"$tmp/defines.awk" <<\_ACAWK ||
 +BEGIN {
 +_ACEOF
 +
 +# Transform confdefs.h into an awk script `defines.awk', embedded as
 +# here-document in config.status, that substitutes the proper values into
 +# config.h.in to produce config.h.
 +
 +# Create a delimiter string that does not exist in confdefs.h, to ease
 +# handling of long lines.
 +ac_delim='%!_!# '
 +for ac_last_try in false false :; do
 +  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
 +  if test -z "$ac_t"; then
 +    break
 +  elif $ac_last_try; then
 +    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
 +  else
 +    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
 +  fi
 +done
 +
 +# For the awk script, D is an array of macro values keyed by name,
 +# likewise P contains macro parameters if any.  Preserve backslash
 +# newline sequences.
 +
 +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
 +sed -n '
 +s/.\{148\}/&'"$ac_delim"'/g
 +t rset
 +:rset
 +s/^[   ]*#[    ]*define[       ][      ]*/ /
 +t def
 +d
 +:def
 +s/\\$//
 +t bsnl
 +s/["\\]/\\&/g
 +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[   ]*\(.*\)/P["\1"]="\2"\
 +D["\1"]=" \3"/p
 +s/^ \('"$ac_word_re"'\)[       ]*\(.*\)/D["\1"]=" \2"/p
 +d
 +:bsnl
 +s/["\\]/\\&/g
 +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[   ]*\(.*\)/P["\1"]="\2"\
 +D["\1"]=" \3\\\\\\n"\\/p
 +t cont
 +s/^ \('"$ac_word_re"'\)[       ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
 +t cont
 +d
 +:cont
 +n
 +s/.\{148\}/&'"$ac_delim"'/g
 +t clear
 +:clear
 +s/\\$//
 +t bsnlc
 +s/["\\]/\\&/g; s/^/"/; s/$/"/p
 +d
 +:bsnlc
 +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
 +b cont
 +' <confdefs.h | sed '
 +s/'"$ac_delim"'/"\\\
 +"/g' >>$CONFIG_STATUS || ac_write_fail=1
 +
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +  for (key in D) D_is_set[key] = 1
 +  FS = "\a"
 +}
 +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
 +  line = \$ 0
 +  split(line, arg, " ")
 +  if (arg[1] == "#") {
 +    defundef = arg[2]
 +    mac1 = arg[3]
 +  } else {
 +    defundef = substr(arg[1], 2)
 +    mac1 = arg[2]
 +  }
 +  split(mac1, mac2, "(") #)
 +  macro = mac2[1]
 +  prefix = substr(line, 1, index(line, defundef) - 1)
 +  if (D_is_set[macro]) {
 +    # Preserve the white space surrounding the "#".
 +    print prefix "define", macro P[macro] D[macro]
 +    next
 +  } else {
 +    # Replace #undef with comments.  This is necessary, for example,
 +    # in the case of _POSIX_SOURCE, which is predefined and required
 +    # on some systems where configure will not decide to define it.
 +    if (defundef == "undef") {
 +      print "/*", prefix defundef, macro, "*/"
 +      next
 +    }
 +  }
 +}
 +{ print }
 +_ACAWK
 +_ACEOF
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
 +fi # test -n "$CONFIG_HEADERS"
 +
 +
 +eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
 +shift
 +for ac_tag
 +do
 +  case $ac_tag in
 +  :[FHLC]) ac_mode=$ac_tag; continue;;
 +  esac
 +  case $ac_mode$ac_tag in
 +  :[FHL]*:*);;
 +  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
 +  :[FH]-) ac_tag=-:-;;
 +  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
 +  esac
 +  ac_save_IFS=$IFS
 +  IFS=:
 +  set x $ac_tag
 +  IFS=$ac_save_IFS
 +  shift
 +  ac_file=$1
 +  shift
 +
 +  case $ac_mode in
 +  :L) ac_source=$1;;
 +  :[FH])
 +    ac_file_inputs=
 +    for ac_f
 +    do
 +      case $ac_f in
 +      -) ac_f="$tmp/stdin";;
 +      *) # Look for the file first in the build tree, then in the source tree
 +       # (if the path is not absolute).  The absolute path cannot be DOS-style,
 +       # because $ac_f cannot contain `:'.
 +       test -f "$ac_f" ||
 +         case $ac_f in
 +         [\\/$]*) false;;
 +         *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 +         esac ||
 +         as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
 +      esac
 +      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
 +      as_fn_append ac_file_inputs " '$ac_f'"
 +    done
 +
 +    # Let's still pretend it is `configure' which instantiates (i.e., don't
 +    # use $as_me), people would be surprised to read:
 +    #    /* config.h.  Generated by config.status.  */
 +    configure_input='Generated from '`
 +        $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
 +      `' by configure.'
 +    if test x"$ac_file" != x-; then
 +      configure_input="$ac_file.  $configure_input"
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
 +$as_echo "$as_me: creating $ac_file" >&6;}
 +    fi
 +    # Neutralize special characters interpreted by sed in replacement strings.
 +    case $configure_input in #(
 +    *\&* | *\|* | *\\* )
 +       ac_sed_conf_input=`$as_echo "$configure_input" |
 +       sed 's/[\\\\&|]/\\\\&/g'`;; #(
 +    *) ac_sed_conf_input=$configure_input;;
 +    esac
 +
 +    case $ac_tag in
 +    *:-:* | *:-) cat >"$tmp/stdin" \
 +      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
 +    esac
 +    ;;
 +  esac
 +
 +  ac_dir=`$as_dirname -- "$ac_file" ||
 +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$ac_file" : 'X\(//\)[^/]' \| \
 +       X"$ac_file" : 'X\(//\)$' \| \
 +       X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$ac_file" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +  as_dir="$ac_dir"; as_fn_mkdir_p
 +  ac_builddir=.
 +
 +case "$ac_dir" in
 +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
 +*)
 +  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
 +  # A ".." for each directory in $ac_dir_suffix.
 +  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
 +  case $ac_top_builddir_sub in
 +  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
 +  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
 +  esac ;;
 +esac
 +ac_abs_top_builddir=$ac_pwd
 +ac_abs_builddir=$ac_pwd$ac_dir_suffix
 +# for backward compatibility:
 +ac_top_builddir=$ac_top_build_prefix
 +
 +case $srcdir in
 +  .)  # We are building in place.
 +    ac_srcdir=.
 +    ac_top_srcdir=$ac_top_builddir_sub
 +    ac_abs_top_srcdir=$ac_pwd ;;
 +  [\\/]* | ?:[\\/]* )  # Absolute name.
 +    ac_srcdir=$srcdir$ac_dir_suffix;
 +    ac_top_srcdir=$srcdir
 +    ac_abs_top_srcdir=$srcdir ;;
 +  *) # Relative name.
 +    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
 +    ac_top_srcdir=$ac_top_build_prefix$srcdir
 +    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 +esac
 +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 +
 +
 +  case $ac_mode in
 +  :F)
 +  #
 +  # CONFIG_FILE
 +  #
 +
 +  case $INSTALL in
 +  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
 +  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
 +  esac
 +  ac_MKDIR_P=$MKDIR_P
 +  case $MKDIR_P in
 +  [\\/$]* | ?:[\\/]* ) ;;
 +  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
 +  esac
 +_ACEOF
 +
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +# If the template does not know about datarootdir, expand it.
 +# FIXME: This hack should be removed a few years after 2.60.
 +ac_datarootdir_hack=; ac_datarootdir_seen=
 +ac_sed_dataroot='
 +/datarootdir/ {
 +  p
 +  q
 +}
 +/@datadir@/p
 +/@docdir@/p
 +/@infodir@/p
 +/@localedir@/p
 +/@mandir@/p'
 +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
 +*datarootdir*) ac_datarootdir_seen=yes;;
 +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 +_ACEOF
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +  ac_datarootdir_hack='
 +  s&@datadir@&$datadir&g
 +  s&@docdir@&$docdir&g
 +  s&@infodir@&$infodir&g
 +  s&@localedir@&$localedir&g
 +  s&@mandir@&$mandir&g
 +  s&\\\${datarootdir}&$datarootdir&g' ;;
 +esac
 +_ACEOF
 +
 +# Neutralize VPATH when `$srcdir' = `.'.
 +# Shell code in configure.ac might set extrasub.
 +# FIXME: do we really want to maintain this feature?
 +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 +ac_sed_extra="$ac_vpsub
 +$extrasub
 +_ACEOF
 +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 +:t
 +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
 +s|@configure_input@|$ac_sed_conf_input|;t t
 +s&@top_builddir@&$ac_top_builddir_sub&;t t
 +s&@top_build_prefix@&$ac_top_build_prefix&;t t
 +s&@srcdir@&$ac_srcdir&;t t
 +s&@abs_srcdir@&$ac_abs_srcdir&;t t
 +s&@top_srcdir@&$ac_top_srcdir&;t t
 +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
 +s&@builddir@&$ac_builddir&;t t
 +s&@abs_builddir@&$ac_abs_builddir&;t t
 +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 +s&@INSTALL@&$ac_INSTALL&;t t
 +s&@MKDIR_P@&$ac_MKDIR_P&;t t
 +$ac_datarootdir_hack
 +"
 +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
 +  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 +
 +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
 +  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
 +  { ac_out=`sed -n '/^[        ]*datarootdir[  ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 +which seems to be undefined.  Please make sure it is defined" >&5
 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
 +which seems to be undefined.  Please make sure it is defined" >&2;}
 +
 +  rm -f "$tmp/stdin"
 +  case $ac_file in
 +  -) cat "$tmp/out" && rm -f "$tmp/out";;
 +  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
 +  esac \
 +  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 + ;;
 +  :H)
 +  #
 +  # CONFIG_HEADER
 +  #
 +  if test x"$ac_file" != x-; then
 +    {
 +      $as_echo "/* $configure_input  */" \
 +      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
 +    } >"$tmp/config.h" \
 +      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 +    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
 +      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 +$as_echo "$as_me: $ac_file is unchanged" >&6;}
 +    else
 +      rm -f "$ac_file"
 +      mv "$tmp/config.h" "$ac_file" \
 +      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 +    fi
 +  else
 +    $as_echo "/* $configure_input  */" \
 +      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
 +      || as_fn_error $? "could not create -" "$LINENO" 5
 +  fi
 +# Compute "$ac_file"'s index in $config_headers.
 +_am_arg="$ac_file"
 +_am_stamp_count=1
 +for _am_header in $config_headers :; do
 +  case $_am_header in
 +    $_am_arg | $_am_arg:* )
 +      break ;;
 +    * )
 +      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
 +  esac
 +done
 +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
 +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$_am_arg" : 'X\(//\)[^/]' \| \
 +       X"$_am_arg" : 'X\(//\)$' \| \
 +       X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$_am_arg" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`/stamp-h$_am_stamp_count
 + ;;
 +
 +  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
 +$as_echo "$as_me: executing $ac_file commands" >&6;}
 + ;;
 +  esac
 +
 +
 +  case $ac_file$ac_mode in
 +    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
 +  # Autoconf 2.62 quotes --file arguments for eval, but not when files
 +  # are listed without --file.  Let's play safe and only enable the eval
 +  # if we detect the quoting.
 +  case $CONFIG_FILES in
 +  *\'*) eval set x "$CONFIG_FILES" ;;
 +  *)   set x $CONFIG_FILES ;;
 +  esac
 +  shift
 +  for mf
 +  do
 +    # Strip MF so we end up with the name of the file.
 +    mf=`echo "$mf" | sed -e 's/:.*$//'`
 +    # Check whether this is an Automake generated Makefile or not.
 +    # We used to match only the files named `Makefile.in', but
 +    # some people rename them; so instead we look at the file content.
 +    # Grep'ing the first line is not enough: some people post-process
 +    # each Makefile.in and add a new line on top of each file to say so.
 +    # Grep'ing the whole file is not good either: AIX grep has a line
 +    # limit of 2048, but all sed's we know have understand at least 4000.
 +    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
 +      dirpart=`$as_dirname -- "$mf" ||
 +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$mf" : 'X\(//\)[^/]' \| \
 +       X"$mf" : 'X\(//\)$' \| \
 +       X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$mf" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +    else
 +      continue
 +    fi
 +    # Extract the definition of DEPDIR, am__include, and am__quote
 +    # from the Makefile without running `make'.
 +    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
 +    test -z "$DEPDIR" && continue
 +    am__include=`sed -n 's/^am__include = //p' < "$mf"`
 +    test -z "am__include" && continue
 +    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
 +    # When using ansi2knr, U may be empty or an underscore; expand it
 +    U=`sed -n 's/^U = //p' < "$mf"`
 +    # Find all dependency output files, they are included files with
 +    # $(DEPDIR) in their names.  We invoke sed twice because it is the
 +    # simplest approach to changing $(DEPDIR) to its actual value in the
 +    # expansion.
 +    for file in `sed -n "
 +      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
 +       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
 +      # Make sure the directory exists.
 +      test -f "$dirpart/$file" && continue
 +      fdir=`$as_dirname -- "$file" ||
 +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 +       X"$file" : 'X\(//\)[^/]' \| \
 +       X"$file" : 'X\(//\)$' \| \
 +       X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 +$as_echo X"$file" |
 +    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)[^/].*/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\/\)$/{
 +          s//\1/
 +          q
 +        }
 +        /^X\(\/\).*/{
 +          s//\1/
 +          q
 +        }
 +        s/.*/./; q'`
 +      as_dir=$dirpart/$fdir; as_fn_mkdir_p
 +      # echo "creating $dirpart/$file"
 +      echo '# dummy' > "$dirpart/$file"
 +    done
 +  done
 +}
 + ;;
 +    "libtool":C)
 +
 +    # See if we are running on zsh, and set the options which allow our
 +    # commands through without removal of \ escapes.
 +    if test -n "${ZSH_VERSION+set}" ; then
 +      setopt NO_GLOB_SUBST
 +    fi
 +
 +    cfgfile="${ofile}T"
 +    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
 +    $RM "$cfgfile"
 +
 +    cat <<_LT_EOF >> "$cfgfile"
 +#! $SHELL
 +
 +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
 +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
 +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 +# NOTE: Changes made to this file will be lost: look at ltmain.sh.
 +#
 +#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
 +#                 2006, 2007, 2008 Free Software Foundation, Inc.
 +#   Written by Gordon Matzigkeit, 1996
 +#
 +#   This file is part of GNU Libtool.
 +#
 +# GNU Libtool is free software; you can redistribute it and/or
 +# modify it under the terms of the GNU General Public License as
 +# published by the Free Software Foundation; either version 2 of
 +# the License, or (at your option) any later version.
 +#
 +# As a special exception to the GNU General Public License,
 +# if you distribute this file as part of a program or library that
 +# is built using GNU Libtool, you may include this file under the
 +# same distribution terms that you use for the rest of that program.
 +#
 +# GNU Libtool is distributed in the hope that it will be useful,
 +# but WITHOUT ANY WARRANTY; without even the implied warranty of
 +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 +# GNU General Public License for more details.
 +#
 +# You should have received a copy of the GNU General Public License
 +# along with GNU Libtool; see the file COPYING.  If not, a copy
 +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
 +# obtained by writing to the Free Software Foundation, Inc.,
 +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 +
 +
 +# The names of the tagged configurations supported by this script.
 +available_tags="CXX "
 +
 +# ### BEGIN LIBTOOL CONFIG
 +
 +# Which release of libtool.m4 was used?
 +macro_version=$macro_version
 +macro_revision=$macro_revision
 +
 +# Whether or not to build static libraries.
 +build_old_libs=$enable_static
 +
++# Assembler program.
++AS=$AS
++
++# DLL creation program.
++DLLTOOL=$DLLTOOL
++
++# Object dumper program.
++OBJDUMP=$OBJDUMP
++
 +# Whether or not to build shared libraries.
 +build_libtool_libs=$enable_shared
 +
 +# What type of objects to build.
 +pic_mode=$pic_mode
 +
 +# Whether or not to optimize for fast installation.
 +fast_install=$enable_fast_install
 +
 +# The host system.
 +host_alias=$host_alias
 +host=$host
 +host_os=$host_os
 +
 +# The build system.
 +build_alias=$build_alias
 +build=$build
 +build_os=$build_os
 +
 +# A sed program that does not truncate output.
 +SED=$lt_SED
 +
 +# Sed that helps us avoid accidentally triggering echo(1) options like -n.
 +Xsed="\$SED -e 1s/^X//"
 +
 +# A grep program that handles long lines.
 +GREP=$lt_GREP
 +
 +# An ERE matcher.
 +EGREP=$lt_EGREP
 +
 +# A literal string matcher.
 +FGREP=$lt_FGREP
 +
 +# A BSD- or MS-compatible name lister.
 +NM=$lt_NM
 +
 +# Whether we need soft or hard links.
 +LN_S=$lt_LN_S
 +
 +# What is the maximum length of a command?
 +max_cmd_len=$max_cmd_len
 +
 +# Object file suffix (normally "o").
 +objext=$ac_objext
 +
 +# Executable file suffix (normally "").
 +exeext=$exeext
 +
 +# whether the shell understands "unset".
 +lt_unset=$lt_unset
 +
 +# turn spaces into newlines.
 +SP2NL=$lt_lt_SP2NL
 +
 +# turn newlines into spaces.
 +NL2SP=$lt_lt_NL2SP
 +
 +# How to create reloadable object files.
 +reload_flag=$lt_reload_flag
 +reload_cmds=$lt_reload_cmds
 +
 +# Method to check whether dependent libraries are shared objects.
 +deplibs_check_method=$lt_deplibs_check_method
 +
 +# Command to use when deplibs_check_method == "file_magic".
 +file_magic_cmd=$lt_file_magic_cmd
 +
 +# The archiver.
 +AR=$lt_AR
 +AR_FLAGS=$lt_AR_FLAGS
 +
 +# A symbol stripping program.
 +STRIP=$lt_STRIP
 +
 +# Commands used to install an old-style archive.
 +RANLIB=$lt_RANLIB
 +old_postinstall_cmds=$lt_old_postinstall_cmds
 +old_postuninstall_cmds=$lt_old_postuninstall_cmds
 +
 +# A C compiler.
 +LTCC=$lt_CC
 +
 +# LTCC compiler flags.
 +LTCFLAGS=$lt_CFLAGS
 +
 +# Take the output of nm and produce a listing of raw symbols and C names.
 +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 +
 +# Transform the output of nm in a proper C declaration.
 +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 +
 +# Transform the output of nm in a C name address pair.
 +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 +
 +# Transform the output of nm in a C name address pair when lib prefix is needed.
 +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 +
 +# The name of the directory that contains temporary libtool files.
 +objdir=$objdir
 +
 +# Shell to use when invoking shell scripts.
 +SHELL=$lt_SHELL
 +
 +# An echo program that does not interpret backslashes.
 +ECHO=$lt_ECHO
 +
 +# Used to examine libraries when file_magic_cmd begins with "file".
 +MAGIC_CMD=$MAGIC_CMD
 +
 +# Must we lock files when doing compilation?
 +need_locks=$lt_need_locks
 +
 +# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
 +DSYMUTIL=$lt_DSYMUTIL
 +
 +# Tool to change global to local symbols on Mac OS X.
 +NMEDIT=$lt_NMEDIT
 +
 +# Tool to manipulate fat objects and archives on Mac OS X.
 +LIPO=$lt_LIPO
 +
 +# ldd/readelf like tool for Mach-O binaries on Mac OS X.
 +OTOOL=$lt_OTOOL
 +
 +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
 +OTOOL64=$lt_OTOOL64
 +
 +# Old archive suffix (normally "a").
 +libext=$libext
 +
 +# Shared library suffix (normally ".so").
 +shrext_cmds=$lt_shrext_cmds
 +
 +# The commands to extract the exported symbol list from a shared archive.
 +extract_expsyms_cmds=$lt_extract_expsyms_cmds
 +
 +# Variables whose values should be saved in libtool wrapper scripts and
 +# restored at link time.
 +variables_saved_for_relink=$lt_variables_saved_for_relink
 +
 +# Do we need the "lib" prefix for modules?
 +need_lib_prefix=$need_lib_prefix
 +
 +# Do we need a version for libraries?
 +need_version=$need_version
 +
 +# Library versioning type.
 +version_type=$version_type
 +
 +# Shared library runtime path variable.
 +runpath_var=$runpath_var
 +
 +# Shared library path variable.
 +shlibpath_var=$shlibpath_var
 +
 +# Is shlibpath searched before the hard-coded library search path?
 +shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 +
 +# Format of library name prefix.
 +libname_spec=$lt_libname_spec
 +
 +# List of archive names.  First name is the real one, the rest are links.
 +# The last name is the one that the linker finds with -lNAME
 +library_names_spec=$lt_library_names_spec
 +
 +# The coded name of the library, if different from the real name.
 +soname_spec=$lt_soname_spec
 +
 +# Command to use after installation of a shared archive.
 +postinstall_cmds=$lt_postinstall_cmds
 +
 +# Command to use after uninstallation of a shared archive.
 +postuninstall_cmds=$lt_postuninstall_cmds
 +
 +# Commands used to finish a libtool library installation in a directory.
 +finish_cmds=$lt_finish_cmds
 +
 +# As "finish_cmds", except a single script fragment to be evaled but
 +# not shown.
 +finish_eval=$lt_finish_eval
 +
 +# Whether we should hardcode library paths into libraries.
 +hardcode_into_libs=$hardcode_into_libs
 +
 +# Compile-time system search path for libraries.
 +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 +
 +# Run-time system search path for libraries.
 +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 +
 +# Whether dlopen is supported.
 +dlopen_support=$enable_dlopen
 +
 +# Whether dlopen of programs is supported.
 +dlopen_self=$enable_dlopen_self
 +
 +# Whether dlopen of statically linked programs is supported.
 +dlopen_self_static=$enable_dlopen_self_static
 +
 +# Commands to strip libraries.
 +old_striplib=$lt_old_striplib
 +striplib=$lt_striplib
 +
 +
 +# The linker used to build libraries.
 +LD=$lt_LD
 +
 +# Commands used to build an old-style archive.
 +old_archive_cmds=$lt_old_archive_cmds
 +
 +# A language specific compiler.
 +CC=$lt_compiler
 +
 +# Is the compiler the GNU compiler?
 +with_gcc=$GCC
 +
 +# Compiler flag to turn off builtin functions.
 +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 +
 +# How to pass a linker flag through the compiler.
 +wl=$lt_lt_prog_compiler_wl
 +
 +# Additional compiler flags for building library objects.
 +pic_flag=$lt_lt_prog_compiler_pic
 +
 +# Compiler flag to prevent dynamic linking.
 +link_static_flag=$lt_lt_prog_compiler_static
 +
 +# Does compiler simultaneously support -c and -o options?
 +compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 +
 +# Whether or not to add -lc for building shared libraries.
 +build_libtool_need_lc=$archive_cmds_need_lc
 +
 +# Whether or not to disallow shared libs when runtime libs are static.
 +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
 +
 +# Compiler flag to allow reflexive dlopens.
 +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
 +
 +# Compiler flag to generate shared objects directly from archives.
 +whole_archive_flag_spec=$lt_whole_archive_flag_spec
 +
 +# Whether the compiler copes with passing no objects directly.
 +compiler_needs_object=$lt_compiler_needs_object
 +
 +# Create an old-style archive from a shared archive.
 +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
 +
 +# Create a temporary old-style archive to link instead of a shared archive.
 +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
 +
 +# Commands used to build a shared archive.
 +archive_cmds=$lt_archive_cmds
 +archive_expsym_cmds=$lt_archive_expsym_cmds
 +
 +# Commands used to build a loadable module if different from building
 +# a shared archive.
 +module_cmds=$lt_module_cmds
 +module_expsym_cmds=$lt_module_expsym_cmds
 +
 +# Whether we are building with GNU ld or not.
 +with_gnu_ld=$lt_with_gnu_ld
 +
 +# Flag that allows shared libraries with undefined symbols to be built.
 +allow_undefined_flag=$lt_allow_undefined_flag
 +
 +# Flag that enforces no undefined symbols.
 +no_undefined_flag=$lt_no_undefined_flag
 +
 +# Flag to hardcode \$libdir into a binary during linking.
 +# This must work even if \$libdir does not exist
 +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 +
 +# If ld is used when linking, flag to hardcode \$libdir into a binary
 +# during linking.  This must work even if \$libdir does not exist.
 +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
 +
 +# Whether we need a single "-rpath" flag with a separated argument.
 +hardcode_libdir_separator=$lt_hardcode_libdir_separator
 +
 +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 +# DIR into the resulting binary.
 +hardcode_direct=$hardcode_direct
 +
 +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 +# DIR into the resulting binary and the resulting library dependency is
 +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
 +# library is relocated.
 +hardcode_direct_absolute=$hardcode_direct_absolute
 +
 +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
 +# into the resulting binary.
 +hardcode_minus_L=$hardcode_minus_L
 +
 +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
 +# into the resulting binary.
 +hardcode_shlibpath_var=$hardcode_shlibpath_var
 +
 +# Set to "yes" if building a shared library automatically hardcodes DIR
 +# into the library and all subsequent libraries and executables linked
 +# against it.
 +hardcode_automatic=$hardcode_automatic
 +
 +# Set to yes if linker adds runtime paths of dependent libraries
 +# to runtime path list.
 +inherit_rpath=$inherit_rpath
 +
 +# Whether libtool must link a program against all its dependency libraries.
 +link_all_deplibs=$link_all_deplibs
 +
 +# Fix the shell variable \$srcfile for the compiler.
 +fix_srcfile_path=$lt_fix_srcfile_path
 +
 +# Set to "yes" if exported symbols are required.
 +always_export_symbols=$always_export_symbols
 +
 +# The commands to list exported symbols.
 +export_symbols_cmds=$lt_export_symbols_cmds
 +
 +# Symbols that should not be listed in the preloaded symbols.
 +exclude_expsyms=$lt_exclude_expsyms
 +
 +# Symbols that must always be exported.
 +include_expsyms=$lt_include_expsyms
 +
 +# Commands necessary for linking programs (against libraries) with templates.
 +prelink_cmds=$lt_prelink_cmds
 +
 +# Specify filename containing input files.
 +file_list_spec=$lt_file_list_spec
 +
 +# How to hardcode a shared library path into an executable.
 +hardcode_action=$hardcode_action
 +
 +# The directories searched by this compiler when creating a shared library.
 +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
 +
 +# Dependencies to place before and after the objects being linked to
 +# create a shared library.
 +predep_objects=$lt_predep_objects
 +postdep_objects=$lt_postdep_objects
 +predeps=$lt_predeps
 +postdeps=$lt_postdeps
 +
 +# The library search path used internally by the compiler when linking
 +# a shared library.
 +compiler_lib_search_path=$lt_compiler_lib_search_path
 +
 +# ### END LIBTOOL CONFIG
 +
 +_LT_EOF
 +
 +  case $host_os in
 +  aix3*)
 +    cat <<\_LT_EOF >> "$cfgfile"
 +# AIX sometimes has problems with the GCC collect2 program.  For some
 +# reason, if we set the COLLECT_NAMES environment variable, the problems
 +# vanish in a puff of smoke.
 +if test "X${COLLECT_NAMES+set}" != Xset; then
 +  COLLECT_NAMES=
 +  export COLLECT_NAMES
 +fi
 +_LT_EOF
 +    ;;
 +  esac
 +
 +
 +ltmain="$ac_aux_dir/ltmain.sh"
 +
 +
 +  # We use sed instead of cat because bash on DJGPP gets confused if
 +  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
 +  # text mode, it properly converts lines to CR/LF.  This bash problem
 +  # is reportedly fixed, but why not run on old versions too?
 +  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
 +    || (rm -f "$cfgfile"; exit 1)
 +
 +  case $xsi_shell in
 +  yes)
 +    cat << \_LT_EOF >> "$cfgfile"
 +
 +# func_dirname file append nondir_replacement
 +# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
 +# otherwise set result to NONDIR_REPLACEMENT.
 +func_dirname ()
 +{
 +  case ${1} in
 +    */*) func_dirname_result="${1%/*}${2}" ;;
 +    *  ) func_dirname_result="${3}" ;;
 +  esac
 +}
 +
 +# func_basename file
 +func_basename ()
 +{
 +  func_basename_result="${1##*/}"
 +}
 +
 +# func_dirname_and_basename file append nondir_replacement
 +# perform func_basename and func_dirname in a single function
 +# call:
 +#   dirname:  Compute the dirname of FILE.  If nonempty,
 +#             add APPEND to the result, otherwise set result
 +#             to NONDIR_REPLACEMENT.
 +#             value returned in "$func_dirname_result"
 +#   basename: Compute filename of FILE.
 +#             value retuned in "$func_basename_result"
 +# Implementation must be kept synchronized with func_dirname
 +# and func_basename. For efficiency, we do not delegate to
 +# those functions but instead duplicate the functionality here.
 +func_dirname_and_basename ()
 +{
 +  case ${1} in
 +    */*) func_dirname_result="${1%/*}${2}" ;;
 +    *  ) func_dirname_result="${3}" ;;
 +  esac
 +  func_basename_result="${1##*/}"
 +}
 +
 +# func_stripname prefix suffix name
 +# strip PREFIX and SUFFIX off of NAME.
 +# PREFIX and SUFFIX must not contain globbing or regex special
 +# characters, hashes, percent signs, but SUFFIX may contain a leading
 +# dot (in which case that matches only a dot).
 +func_stripname ()
 +{
 +  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
 +  # positional parameters, so assign one to ordinary parameter first.
 +  func_stripname_result=${3}
 +  func_stripname_result=${func_stripname_result#"${1}"}
 +  func_stripname_result=${func_stripname_result%"${2}"}
 +}
 +
 +# func_opt_split
 +func_opt_split ()
 +{
 +  func_opt_split_opt=${1%%=*}
 +  func_opt_split_arg=${1#*=}
 +}
 +
 +# func_lo2o object
 +func_lo2o ()
 +{
 +  case ${1} in
 +    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
 +    *)    func_lo2o_result=${1} ;;
 +  esac
 +}
 +
 +# func_xform libobj-or-source
 +func_xform ()
 +{
 +  func_xform_result=${1%.*}.lo
 +}
 +
 +# func_arith arithmetic-term...
 +func_arith ()
 +{
 +  func_arith_result=$(( $* ))
 +}
 +
 +# func_len string
 +# STRING may not start with a hyphen.
 +func_len ()
 +{
 +  func_len_result=${#1}
 +}
 +
 +_LT_EOF
 +    ;;
 +  *) # Bourne compatible functions.
 +    cat << \_LT_EOF >> "$cfgfile"
 +
 +# func_dirname file append nondir_replacement
 +# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
 +# otherwise set result to NONDIR_REPLACEMENT.
 +func_dirname ()
 +{
 +  # Extract subdirectory from the argument.
 +  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
 +  if test "X$func_dirname_result" = "X${1}"; then
 +    func_dirname_result="${3}"
 +  else
 +    func_dirname_result="$func_dirname_result${2}"
 +  fi
 +}
 +
 +# func_basename file
 +func_basename ()
 +{
 +  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 +}
 +
 +
 +# func_stripname prefix suffix name
 +# strip PREFIX and SUFFIX off of NAME.
 +# PREFIX and SUFFIX must not contain globbing or regex special
 +# characters, hashes, percent signs, but SUFFIX may contain a leading
 +# dot (in which case that matches only a dot).
 +# func_strip_suffix prefix name
 +func_stripname ()
 +{
 +  case ${2} in
 +    .*) func_stripname_result=`$ECHO "X${3}" \
 +           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
 +    *)  func_stripname_result=`$ECHO "X${3}" \
 +           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
 +  esac
 +}
 +
 +# sed scripts:
 +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
 +my_sed_long_arg='1s/^-[^=]*=//'
 +
 +# func_opt_split
 +func_opt_split ()
 +{
 +  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
 +  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
 +}
 +
 +# func_lo2o object
 +func_lo2o ()
 +{
 +  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
 +}
 +
 +# func_xform libobj-or-source
 +func_xform ()
 +{
 +  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
 +}
 +
 +# func_arith arithmetic-term...
 +func_arith ()
 +{
 +  func_arith_result=`expr "$@"`
 +}
 +
 +# func_len string
 +# STRING may not start with a hyphen.
 +func_len ()
 +{
 +  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
 +}
 +
 +_LT_EOF
 +esac
 +
 +case $lt_shell_append in
 +  yes)
 +    cat << \_LT_EOF >> "$cfgfile"
 +
 +# func_append var value
 +# Append VALUE to the end of shell variable VAR.
 +func_append ()
 +{
 +  eval "$1+=\$2"
 +}
 +_LT_EOF
 +    ;;
 +  *)
 +    cat << \_LT_EOF >> "$cfgfile"
 +
 +# func_append var value
 +# Append VALUE to the end of shell variable VAR.
 +func_append ()
 +{
 +  eval "$1=\$$1\$2"
 +}
 +
 +_LT_EOF
 +    ;;
 +  esac
 +
 +
 +  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
 +    || (rm -f "$cfgfile"; exit 1)
 +
 +  mv -f "$cfgfile" "$ofile" ||
 +    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
 +  chmod +x "$ofile"
 +
 +
 +    cat <<_LT_EOF >> "$ofile"
 +
 +# ### BEGIN LIBTOOL TAG CONFIG: CXX
 +
 +# The linker used to build libraries.
 +LD=$lt_LD_CXX
 +
 +# Commands used to build an old-style archive.
 +old_archive_cmds=$lt_old_archive_cmds_CXX
 +
 +# A language specific compiler.
 +CC=$lt_compiler_CXX
 +
 +# Is the compiler the GNU compiler?
 +with_gcc=$GCC_CXX
 +
 +# Compiler flag to turn off builtin functions.
 +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
 +
 +# How to pass a linker flag through the compiler.
 +wl=$lt_lt_prog_compiler_wl_CXX
 +
 +# Additional compiler flags for building library objects.
 +pic_flag=$lt_lt_prog_compiler_pic_CXX
 +
 +# Compiler flag to prevent dynamic linking.
 +link_static_flag=$lt_lt_prog_compiler_static_CXX
 +
 +# Does compiler simultaneously support -c and -o options?
 +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 +
 +# Whether or not to add -lc for building shared libraries.
 +build_libtool_need_lc=$archive_cmds_need_lc_CXX
 +
 +# Whether or not to disallow shared libs when runtime libs are static.
 +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
 +
 +# Compiler flag to allow reflexive dlopens.
 +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
 +
 +# Compiler flag to generate shared objects directly from archives.
 +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
 +
 +# Whether the compiler copes with passing no objects directly.
 +compiler_needs_object=$lt_compiler_needs_object_CXX
 +
 +# Create an old-style archive from a shared archive.
 +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
 +
 +# Create a temporary old-style archive to link instead of a shared archive.
 +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
 +
 +# Commands used to build a shared archive.
 +archive_cmds=$lt_archive_cmds_CXX
 +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
 +
 +# Commands used to build a loadable module if different from building
 +# a shared archive.
 +module_cmds=$lt_module_cmds_CXX
 +module_expsym_cmds=$lt_module_expsym_cmds_CXX
 +
 +# Whether we are building with GNU ld or not.
 +with_gnu_ld=$lt_with_gnu_ld_CXX
 +
 +# Flag that allows shared libraries with undefined symbols to be built.
 +allow_undefined_flag=$lt_allow_undefined_flag_CXX
 +
 +# Flag that enforces no undefined symbols.
 +no_undefined_flag=$lt_no_undefined_flag_CXX
 +
 +# Flag to hardcode \$libdir into a binary during linking.
 +# This must work even if \$libdir does not exist
 +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 +
 +# If ld is used when linking, flag to hardcode \$libdir into a binary
 +# during linking.  This must work even if \$libdir does not exist.
 +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
 +
 +# Whether we need a single "-rpath" flag with a separated argument.
 +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 +
 +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 +# DIR into the resulting binary.
 +hardcode_direct=$hardcode_direct_CXX
 +
 +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
 +# DIR into the resulting binary and the resulting library dependency is
 +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
 +# library is relocated.
 +hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 +
 +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
 +# into the resulting binary.
 +hardcode_minus_L=$hardcode_minus_L_CXX
 +
 +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
 +# into the resulting binary.
 +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
 +
 +# Set to "yes" if building a shared library automatically hardcodes DIR
 +# into the library and all subsequent libraries and executables linked
 +# against it.
 +hardcode_automatic=$hardcode_automatic_CXX
 +
 +# Set to yes if linker adds runtime paths of dependent libraries
 +# to runtime path list.
 +inherit_rpath=$inherit_rpath_CXX
 +
 +# Whether libtool must link a program against all its dependency libraries.
 +link_all_deplibs=$link_all_deplibs_CXX
 +
 +# Fix the shell variable \$srcfile for the compiler.
 +fix_srcfile_path=$lt_fix_srcfile_path_CXX
 +
 +# Set to "yes" if exported symbols are required.
 +always_export_symbols=$always_export_symbols_CXX
 +
 +# The commands to list exported symbols.
 +export_symbols_cmds=$lt_export_symbols_cmds_CXX
 +
 +# Symbols that should not be listed in the preloaded symbols.
 +exclude_expsyms=$lt_exclude_expsyms_CXX
 +
 +# Symbols that must always be exported.
 +include_expsyms=$lt_include_expsyms_CXX
 +
 +# Commands necessary for linking programs (against libraries) with templates.
 +prelink_cmds=$lt_prelink_cmds_CXX
 +
 +# Specify filename containing input files.
 +file_list_spec=$lt_file_list_spec_CXX
 +
 +# How to hardcode a shared library path into an executable.
 +hardcode_action=$hardcode_action_CXX
 +
 +# The directories searched by this compiler when creating a shared library.
 +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
 +
 +# Dependencies to place before and after the objects being linked to
 +# create a shared library.
 +predep_objects=$lt_predep_objects_CXX
 +postdep_objects=$lt_postdep_objects_CXX
 +predeps=$lt_predeps_CXX
 +postdeps=$lt_postdeps_CXX
 +
 +# The library search path used internally by the compiler when linking
 +# a shared library.
 +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
 +
 +# ### END LIBTOOL TAG CONFIG: CXX
 +_LT_EOF
 +
 + ;;
 +
 +  esac
 +done # for ac_tag
 +
 +
 +as_fn_exit 0
 +_ACEOF
 +ac_clean_files=$ac_clean_files_save
 +
 +test $ac_write_fail = 0 ||
 +  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
 +
 +
 +# configure is writing to config.log, and then calls config.status.
 +# config.status does its own redirection, appending to config.log.
 +# Unfortunately, on DOS this fails, as config.log is still kept open
 +# by configure, so config.status won't be able to write to it; its
 +# output is simply discarded.  So we exec the FD to /dev/null,
 +# effectively closing config.log, so it can be properly (re)opened and
 +# appended to by config.status.  When coming back to configure, we
 +# need to make the FD available again.
 +if test "$no_create" != yes; then
 +  ac_cs_success=:
 +  ac_config_status_args=
 +  test "$silent" = yes &&
 +    ac_config_status_args="$ac_config_status_args --quiet"
 +  exec 5>/dev/null
 +  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
 +  exec 5>>config.log
 +  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
 +  # would make configure fail if this is the last instruction.
 +  $ac_cs_success || as_fn_exit 1
 +fi
 +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
 +  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 +fi
 +

diff --cc debian/control
index 2722d46,0000000..37990e9
mode 100644,000000..100644
--- 1/debian/control
--- /dev/null
+++ b/debian/control
@@@ -1,20 -1,0 +1,20 @@@
-     libshib-resolver-dev, libjansson-dev, libfreeradius-dev
 +Source: moonshot-gss-eap
 +Section: net
 +Priority: optional
 +Maintainer: Sam Hartman <hartmans@debian.org>
 +Build-Depends: debhelper (>= 7.0.50~), autotools-dev, libshibsp-dev (>= 2.5+dfsg~moonshot2), 
 +    libradsec-dev, libkrb5-dev (>= 1.9.1+dfsg-2), 
++    libshib-resolver-dev, libjansson-dev, libfreeradius-dev, moonshot-ui-dev
 +Build-Conflicts: libgss-dev
 +Standards-Version: 3.9.2
 +Homepage: http://www.project-moonshot.org/
 +Vcs-Git: http://www.project-moonshot.org/git/moonshot.git
 +#Vcs-Browser: http://git.debian.org/?p=collab-maint/moonshot-gss-eap.git;a=summary
 +
 +Package: moonshot-gss-eap
 +Architecture: any
 +Depends: ${shlibs:Depends}, ${misc:Depends}
 +Description: Moonshot Federated Authentication - authentication mechanism
 + Project moonshot provides federated authentication using EAP, RADIUS
 + and SAML to applications beyond the web platform. This package
 + contains the client and server plugins to perform authentication.

diff --cc libeap/Makefile.in
index 4193f08,0000000..e69872a
mode 100644,000000..100644
--- 1/libeap/Makefile.in
--- /dev/null
+++ b/libeap/Makefile.in
@@@ -1,1244 -1,0 +1,1331 @@@
- DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-       COPYING
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
 +
 +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
 +# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
 +# Inc.
 +# This Makefile.in is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# This program is distributed in the hope that it will be useful,
 +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 +# PARTICULAR PURPOSE.
 +
 +@SET_MAKE@
 +
++
 +VPATH = @srcdir@
 +pkgdatadir = $(datadir)/@PACKAGE@
 +pkgincludedir = $(includedir)/@PACKAGE@
 +pkglibdir = $(libdir)/@PACKAGE@
 +pkglibexecdir = $(libexecdir)/@PACKAGE@
 +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 +install_sh_DATA = $(install_sh) -c -m 644
 +install_sh_PROGRAM = $(install_sh) -c
 +install_sh_SCRIPT = $(install_sh) -c
 +INSTALL_HEADER = $(INSTALL_DATA)
 +transform = $(program_transform_name)
 +NORMAL_INSTALL = :
 +PRE_INSTALL = :
 +POST_INSTALL = :
 +NORMAL_UNINSTALL = :
 +PRE_UNINSTALL = :
 +POST_UNINSTALL = :
 +build_triplet = @build@
 +host_triplet = @host@
 +subdir = libeap
- am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
++DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.am \
++      $(srcdir)/Makefile.in COPYING
 +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
++      $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
++      $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
++      $(top_srcdir)/m4/minuso.m4 $(top_srcdir)/acinclude.m4 \
 +      $(top_srcdir)/configure.ac
 +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 +      $(ACLOCAL_M4)
 +mkinstalldirs = $(install_sh) -d
 +CONFIG_HEADER = $(top_builddir)/config.h
 +CONFIG_CLEAN_FILES =
 +CONFIG_CLEAN_VPATH_FILES =
 +LTLIBRARIES = $(noinst_LTLIBRARIES)
 +libeap_la_LIBADD =
 +am__objects_1 = eap_peap_common.lo eap_psk_common.lo eap_pax_common.lo \
 +      eap_sake_common.lo eap_gpsk_common.lo chap.lo
 +am__objects_2 = eap_tls.lo eap_peap.lo eap_ttls.lo eap_md5.lo \
 +      eap_mschapv2.lo mschapv2.lo eap_otp.lo eap_gtc.lo eap_leap.lo \
 +      eap_psk.lo eap_pax.lo eap_sake.lo eap_gpsk.lo eap.lo \
 +      eap_common.lo eap_methods.lo eap_tls_common.lo
 +am__objects_3 = base64.lo common.lo ip_addr.lo radiotap.lo trace.lo \
 +      uuid.lo wpa_debug.lo wpabuf.lo os_unix.lo
 +am__objects_4 = aes-cbc.lo aes-ctr.lo aes-eax.lo aes-encblock.lo \
 +      aes-internal.lo aes-internal-dec.lo aes-internal-enc.lo \
 +      aes-omac1.lo aes-unwrap.lo aes-wrap.lo des-internal.lo \
 +      dh_group5.lo dh_groups.lo md4-internal.lo md5.lo \
 +      md5-internal.lo md5-non-fips.lo milenage.lo ms_funcs.lo rc4.lo \
 +      sha1.lo sha1-internal.lo sha1-pbkdf2.lo sha1-tlsprf.lo \
 +      sha1-tprf.lo sha256.lo sha256-internal.lo crypto_internal.lo \
 +      crypto_internal-cipher.lo crypto_internal-modexp.lo \
 +      crypto_internal-rsa.lo tls_internal.lo fips_prf_internal.lo
 +am__objects_5 = asn1.lo bignum.lo pkcs1.lo pkcs5.lo pkcs8.lo rsa.lo \
 +      tlsv1_client.lo tlsv1_client_read.lo tlsv1_client_write.lo \
 +      tlsv1_common.lo tlsv1_cred.lo tlsv1_record.lo tlsv1_server.lo \
 +      tlsv1_server_read.lo tlsv1_server_write.lo x509v3.lo
 +am_libeap_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
 +      $(am__objects_3) $(am__objects_4) $(am__objects_5)
 +libeap_la_OBJECTS = $(am_libeap_la_OBJECTS)
 +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-       src/eap_common/eap_gpsk_common.c src/eap_common/chap.c
++depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
 +am__depfiles_maybe = depfiles
 +am__mv = mv -f
 +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 +      $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 +      $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 +CCLD = $(CC)
 +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 +      $(LDFLAGS) -o $@
 +SOURCES = $(libeap_la_SOURCES)
 +DIST_SOURCES = $(libeap_la_SOURCES)
++HEADERS = $(noinst_HEADERS)
 +ETAGS = etags
 +CTAGS = ctags
 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 +ACLOCAL = @ACLOCAL@
 +AMTAR = @AMTAR@
 +AR = @AR@
++AS = @AS@
 +AUTOCONF = @AUTOCONF@
 +AUTOHEADER = @AUTOHEADER@
 +AUTOMAKE = @AUTOMAKE@
 +AWK = @AWK@
 +CC = @CC@
 +CCDEPMODE = @CCDEPMODE@
 +CFLAGS = @CFLAGS@ -DEAP_TLS -DEAP_PEAP -DEAP_TTLS -DEAP_MD5 \
 +      -DEAP_MSCHAPv2 -DEAP_GTC -DEAP_OTP -DEAP_LEAP -DEAP_PSK \
 +      -DEAP_PAX -DEAP_SAKE -DEAP_GPSK -DEAP_GPSK_SHA256 \
 +      -DEAP_SERVER_IDENTITY -DEAP_SERVER_TLS -DEAP_SERVER_PEAP \
 +      -DEAP_SERVER_TTLS -DEAP_SERVER_MD5 -DEAP_SERVER_MSCHAPV2 \
 +      -DEAP_SERVER_GTC -DEAP_SERVER_PSK -DEAP_SERVER_PAX \
 +      -DEAP_SERVER_SAKE -DEAP_SERVER_GPSK -DEAP_SERVER_GPSK_SHA256 \
 +      -DIEEE8021X_EAPOL -DCONFIG_IPV6 -DCONFIG_INTERNAL_LIBTOMMATH \
 +      -DCONFIG_CRYPTO_INTERNAL -DCONFIG_TLS_INTERNAL_CLIENT \
 +      -DCONFIG_TLS_INTERNAL_SERVER
 +COMPILE_ET = @COMPILE_ET@
 +CPP = @CPP@
 +CPPFLAGS = @CPPFLAGS@
 +CXX = @CXX@
 +CXXCPP = @CXXCPP@
 +CXXDEPMODE = @CXXDEPMODE@
 +CXXFLAGS = @CXXFLAGS@
 +CYGPATH_W = @CYGPATH_W@
 +DEFS = @DEFS@
 +DEPDIR = @DEPDIR@
++DLLTOOL = @DLLTOOL@
 +DSYMUTIL = @DSYMUTIL@
 +DUMPBIN = @DUMPBIN@
 +ECHO_C = @ECHO_C@
 +ECHO_N = @ECHO_N@
 +ECHO_T = @ECHO_T@
 +EGREP = @EGREP@
 +EXEEXT = @EXEEXT@
 +FGREP = @FGREP@
 +GREP = @GREP@
 +INSTALL = @INSTALL@
 +INSTALL_DATA = @INSTALL_DATA@
 +INSTALL_PROGRAM = @INSTALL_PROGRAM@
 +INSTALL_SCRIPT = @INSTALL_SCRIPT@
 +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 +JANSSON_CFLAGS = @JANSSON_CFLAGS@
 +JANSSON_LDFLAGS = @JANSSON_LDFLAGS@
 +JANSSON_LIBS = @JANSSON_LIBS@
 +KRB5_CFLAGS = @KRB5_CFLAGS@
++KRB5_LDFLAGS = @KRB5_LDFLAGS@
 +KRB5_LIBS = @KRB5_LIBS@
 +LD = @LD@
 +LDFLAGS = @LDFLAGS@
++LIBMOONSHOT_CFLAGS = @LIBMOONSHOT_CFLAGS@
++LIBMOONSHOT_LDFLAGS = @LIBMOONSHOT_LDFLAGS@
++LIBMOONSHOT_LIBS = @LIBMOONSHOT_LIBS@
 +LIBOBJS = @LIBOBJS@
 +LIBS = @LIBS@
 +LIBTOOL = @LIBTOOL@
 +LIPO = @LIPO@
 +LN_S = @LN_S@
 +LTLIBOBJS = @LTLIBOBJS@
++MAINT = @MAINT@
 +MAKEINFO = @MAKEINFO@
 +MKDIR_P = @MKDIR_P@
 +NM = @NM@
 +NMEDIT = @NMEDIT@
 +OBJDUMP = @OBJDUMP@
 +OBJEXT = @OBJEXT@
++OPENSAML_CXXFLAGS = @OPENSAML_CXXFLAGS@
++OPENSAML_LDFLAGS = @OPENSAML_LDFLAGS@
++OPENSAML_LIBS = @OPENSAML_LIBS@
 +OTOOL = @OTOOL@
 +OTOOL64 = @OTOOL64@
 +PACKAGE = @PACKAGE@
 +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 +PACKAGE_NAME = @PACKAGE_NAME@
 +PACKAGE_STRING = @PACKAGE_STRING@
 +PACKAGE_TARNAME = @PACKAGE_TARNAME@
 +PACKAGE_URL = @PACKAGE_URL@
 +PACKAGE_VERSION = @PACKAGE_VERSION@
 +PATH_SEPARATOR = @PATH_SEPARATOR@
 +RADSEC_CFLAGS = @RADSEC_CFLAGS@
 +RADSEC_LDFLAGS = @RADSEC_LDFLAGS@
 +RADSEC_LIBS = @RADSEC_LIBS@
 +RANLIB = @RANLIB@
 +SED = @SED@
 +SET_MAKE = @SET_MAKE@
 +SHELL = @SHELL@
 +SHIBRESOLVER_CXXFLAGS = @SHIBRESOLVER_CXXFLAGS@
 +SHIBRESOLVER_LDFLAGS = @SHIBRESOLVER_LDFLAGS@
 +SHIBRESOLVER_LIBS = @SHIBRESOLVER_LIBS@
 +SHIBSP_CXXFLAGS = @SHIBSP_CXXFLAGS@
 +SHIBSP_LDFLAGS = @SHIBSP_LDFLAGS@
 +SHIBSP_LIBS = @SHIBSP_LIBS@
 +STRIP = @STRIP@
 +TARGET_CFLAGS = @TARGET_CFLAGS@
 +TARGET_LDFLAGS = @TARGET_LDFLAGS@
 +VERSION = @VERSION@
 +abs_builddir = @abs_builddir@
 +abs_srcdir = @abs_srcdir@
 +abs_top_builddir = @abs_top_builddir@
 +abs_top_srcdir = @abs_top_srcdir@
 +ac_ct_CC = @ac_ct_CC@
 +ac_ct_CXX = @ac_ct_CXX@
 +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 +am__include = @am__include@
 +am__leading_dot = @am__leading_dot@
 +am__quote = @am__quote@
 +am__tar = @am__tar@
 +am__untar = @am__untar@
 +bindir = @bindir@
 +build = @build@
 +build_alias = @build_alias@
 +build_cpu = @build_cpu@
 +build_os = @build_os@
 +build_vendor = @build_vendor@
 +builddir = @builddir@
 +datadir = @datadir@
 +datarootdir = @datarootdir@
 +docdir = @docdir@
 +dvidir = @dvidir@
 +exec_prefix = @exec_prefix@
 +host = @host@
 +host_alias = @host_alias@
 +host_cpu = @host_cpu@
 +host_os = @host_os@
 +host_vendor = @host_vendor@
 +htmldir = @htmldir@
 +includedir = @includedir@
 +infodir = @infodir@
 +install_sh = @install_sh@
 +libdir = @libdir@
 +libexecdir = @libexecdir@
 +localedir = @localedir@
 +localstatedir = @localstatedir@
 +lt_ECHO = @lt_ECHO@
 +mandir = @mandir@
 +mkdir_p = @mkdir_p@
 +oldincludedir = @oldincludedir@
 +pdfdir = @pdfdir@
 +prefix = @prefix@
 +program_transform_name = @program_transform_name@
 +psdir = @psdir@
 +sbindir = @sbindir@
 +sharedstatedir = @sharedstatedir@
 +srcdir = @srcdir@
 +sysconfdir = @sysconfdir@
 +target_alias = @target_alias@
 +top_build_prefix = @top_build_prefix@
 +top_builddir = @top_builddir@
 +top_srcdir = @top_srcdir@
 +AUTOMAKE_OPTIONS = foreign
 +AM_CPPFLAGS = -I$(srcdir)/src -I$(srcdir)/eap_example -I$(srcdir)/src/utils 
++noinst_HEADERS = \
++      src/common/defs.h \
++      src/common/eapol_common.h \
++      src/common/ieee802_11_common.h \
++      src/common/ieee802_11_defs.h \
++      src/common/privsep_commands.h \
++      src/common/version.h \
++      src/common/wpa_common.h \
++      src/common/wpa_ctrl.h
++
++EXTRA_DIST = src/tls/libtommath.c
 +SOURCES_BOTH = src/eap_common/eap_peap_common.c \
 +      src/eap_common/eap_psk_common.c \
 +      src/eap_common/eap_pax_common.c \
 +      src/eap_common/eap_sake_common.c \
-       src/eap_peer/eap_tls_common.c
++      src/eap_common/eap_gpsk_common.c src/eap_common/chap.c \
++      src/eap_common/chap.h src/eap_common/eap_common.h \
++      src/eap_common/eap_defs.h src/eap_common/eap_fast_common.h \
++      src/eap_common/eap_gpsk_common.h \
++      src/eap_common/eap_ikev2_common.h \
++      src/eap_common/eap_pax_common.h \
++      src/eap_common/eap_peap_common.h \
++      src/eap_common/eap_psk_common.h \
++      src/eap_common/eap_pwd_common.h \
++      src/eap_common/eap_sake_common.h \
++      src/eap_common/eap_sim_common.h \
++      src/eap_common/eap_tlv_common.h src/eap_common/eap_ttls.h \
++      src/eap_common/eap_wsc_common.h src/eap_common/ikev2_common.h
 +SOURCES_peer = src/eap_peer/eap_tls.c src/eap_peer/eap_peap.c \
 +      src/eap_peer/eap_ttls.c src/eap_peer/eap_md5.c \
 +      src/eap_peer/eap_mschapv2.c src/eap_peer/mschapv2.c \
 +      src/eap_peer/eap_otp.c src/eap_peer/eap_gtc.c \
 +      src/eap_peer/eap_leap.c src/eap_peer/eap_psk.c \
 +      src/eap_peer/eap_pax.c src/eap_peer/eap_sake.c \
 +      src/eap_peer/eap_gpsk.c src/eap_peer/eap.c \
 +      src/eap_common/eap_common.c src/eap_peer/eap_methods.c \
-       src/utils/os_unix.c
++      src/eap_peer/eap_tls_common.c src/eap_peer/eap_config.h \
++      src/eap_peer/eap_fast_pac.h src/eap_peer/eap.h \
++      src/eap_peer/eap_i.h src/eap_peer/eap_methods.h \
++      src/eap_peer/eap_tls_common.h src/eap_peer/ikev2.h \
++      src/eap_peer/mschapv2.h src/eap_peer/tncc.h
 +UTILS_SRCS = src/utils/base64.c \
 +      src/utils/common.c \
 +      src/utils/ip_addr.c \
 +      src/utils/radiotap.c \
 +      src/utils/trace.c \
 +      src/utils/uuid.c \
 +      src/utils/wpa_debug.c \
 +      src/utils/wpabuf.c \
-     src/crypto/fips_prf_internal.c
++      src/utils/os_unix.c \
++      src/utils/base64.h \
++      src/utils/build_config.h \
++      src/utils/common.h \
++      src/utils/eloop.h \
++      src/utils/includes.h \
++      src/utils/ip_addr.h \
++      src/utils/list.h \
++      src/utils/os.h \
++      src/utils/pcsc_funcs.h \
++      src/utils/radiotap.h \
++      src/utils/radiotap_iter.h \
++      src/utils/state_machine.h \
++      src/utils/trace.h \
++      src/utils/uuid.h \
++      src/utils/wpabuf.h \
++      src/utils/wpa_debug.h
 +
 +CRYPTO_SRCS = \
 +    src/crypto/aes-cbc.c \
 +    src/crypto/aes-ctr.c \
 +    src/crypto/aes-eax.c \
 +    src/crypto/aes-encblock.c \
 +    src/crypto/aes-internal.c \
 +    src/crypto/aes-internal-dec.c \
 +    src/crypto/aes-internal-enc.c \
 +    src/crypto/aes-omac1.c \
 +    src/crypto/aes-unwrap.c \
 +    src/crypto/aes-wrap.c \
 +    src/crypto/des-internal.c \
 +    src/crypto/dh_group5.c \
 +    src/crypto/dh_groups.c \
 +    src/crypto/md4-internal.c \
 +    src/crypto/md5.c \
 +    src/crypto/md5-internal.c \
 +    src/crypto/md5-non-fips.c \
 +    src/crypto/milenage.c \
 +    src/crypto/ms_funcs.c \
 +    src/crypto/rc4.c \
 +    src/crypto/sha1.c \
 +    src/crypto/sha1-internal.c \
 +    src/crypto/sha1-pbkdf2.c \
 +    src/crypto/sha1-tlsprf.c \
 +    src/crypto/sha1-tprf.c \
 +    src/crypto/sha256.c \
 +    src/crypto/sha256-internal.c \
 +    src/crypto/crypto_internal.c \
 +    src/crypto/crypto_internal-cipher.c \
 +    src/crypto/crypto_internal-modexp.c \
 +    src/crypto/crypto_internal-rsa.c \
 +    src/crypto/tls_internal.c \
-     src/tls/x509v3.c
++    src/crypto/fips_prf_internal.c \
++      src/crypto/aes.h \
++      src/crypto/aes_i.h \
++      src/crypto/aes_wrap.h \
++      src/crypto/crypto.h \
++      src/crypto/des_i.h \
++      src/crypto/dh_group5.h \
++      src/crypto/dh_groups.h \
++      src/crypto/md5.h \
++      src/crypto/md5_i.h \
++      src/crypto/milenage.h \
++      src/crypto/ms_funcs.h \
++      src/crypto/sha1.h \
++      src/crypto/sha1_i.h \
++      src/crypto/sha256.h \
++      src/crypto/tls.h
 +
 +TLS_SRCS = \
 +    src/tls/asn1.c \
 +    src/tls/bignum.c \
 +    src/tls/pkcs1.c \
 +    src/tls/pkcs5.c \
 +    src/tls/pkcs8.c \
 +    src/tls/rsa.c \
 +    src/tls/tlsv1_client.c \
 +    src/tls/tlsv1_client_read.c \
 +    src/tls/tlsv1_client_write.c \
 +    src/tls/tlsv1_common.c \
 +    src/tls/tlsv1_cred.c \
 +    src/tls/tlsv1_record.c \
 +    src/tls/tlsv1_server.c \
 +    src/tls/tlsv1_server_read.c \
 +    src/tls/tlsv1_server_write.c \
- $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
++    src/tls/x509v3.c \
++      src/tls/asn1.h \
++      src/tls/bignum.h \
++      src/tls/pkcs1.h \
++      src/tls/pkcs5.h \
++      src/tls/pkcs8.h \
++      src/tls/rsa.h \
++      src/tls/tlsv1_client.h \
++      src/tls/tlsv1_client_i.h \
++      src/tls/tlsv1_common.h \
++      src/tls/tlsv1_cred.h \
++      src/tls/tlsv1_record.h \
++      src/tls/tlsv1_server.h \
++      src/tls/tlsv1_server_i.h \
++      src/tls/x509v3.h 
 +
 +libeap_la_SOURCES = $(SOURCES_BOTH) $(SOURCES_peer) $(UTILS_SRCS) $(CRYPTO_SRCS) $(TLS_SRCS)
 +noinst_LTLIBRARIES = libeap.la
 +all: all-am
 +
 +.SUFFIXES:
 +.SUFFIXES: .c .lo .o .obj
- $(top_srcdir)/configure:  $(am__configure_deps)
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 +      @for dep in $?; do \
 +        case '$(am__configure_deps)' in \
 +          *$$dep*) \
 +            ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 +              && { if test -f $@; then exit 0; else break; fi; }; \
 +            exit 1;; \
 +        esac; \
 +      done; \
 +      echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libeap/Makefile'; \
 +      $(am__cd) $(top_srcdir) && \
 +        $(AUTOMAKE) --foreign libeap/Makefile
 +.PRECIOUS: Makefile
 +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 +      @case '$?' in \
 +        *config.status*) \
 +          cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 +        *) \
 +          echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 +          cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 +      esac;
 +
 +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +
- $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
- all-am: Makefile $(LTLIBRARIES)
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +$(am__aclocal_m4_deps):
 +
 +clean-noinstLTLIBRARIES:
 +      -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
 +      @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
 +        dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 +        test "$$dir" != "$$p" || dir=.; \
 +        echo "rm -f \"$${dir}/so_locations\""; \
 +        rm -f "$${dir}/so_locations"; \
 +      done
 +libeap.la: $(libeap_la_OBJECTS) $(libeap_la_DEPENDENCIES) 
 +      $(LINK)  $(libeap_la_OBJECTS) $(libeap_la_LIBADD) $(LIBS)
 +
 +mostlyclean-compile:
 +      -rm -f *.$(OBJEXT)
 +
 +distclean-compile:
 +      -rm -f *.tab.c
 +
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-cbc.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-ctr.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-eax.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-encblock.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal-dec.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal-enc.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-omac1.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-unwrap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aes-wrap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asn1.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/base64.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bignum.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-cipher.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-modexp.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal-rsa.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto_internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/des-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dh_group5.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dh_groups.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gpsk.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gpsk_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_gtc.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_leap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_md5.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_methods.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_mschapv2.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_otp.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_pax.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_pax_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_peap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_peap_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_psk.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_psk_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_sake.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_sake_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_tls.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_tls_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eap_ttls.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fips_prf_internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ip_addr.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md4-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5-non-fips.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/milenage.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ms_funcs.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mschapv2.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_unix.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs1.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs5.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkcs8.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/radiotap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rc4.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rsa.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-pbkdf2.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-tlsprf.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1-tprf.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha1.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha256-internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sha256.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls_internal.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client_read.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_client_write.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_common.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_record.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server_read.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tlsv1_server_write.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trace.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uuid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wpa_debug.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wpabuf.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x509v3.Plo@am__quote@
 +
 +.c.o:
 +@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 +
 +.c.obj:
 +@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
 +
 +.c.lo:
 +@am__fastdepCC_TRUE@  $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
 +
 +eap_peap_common.lo: src/eap_common/eap_peap_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_peap_common.lo -MD -MP -MF $(DEPDIR)/eap_peap_common.Tpo -c -o eap_peap_common.lo `test -f 'src/eap_common/eap_peap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_peap_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_peap_common.Tpo $(DEPDIR)/eap_peap_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_peap_common.c' object='eap_peap_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_peap_common.lo `test -f 'src/eap_common/eap_peap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_peap_common.c
 +
 +eap_psk_common.lo: src/eap_common/eap_psk_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_psk_common.lo -MD -MP -MF $(DEPDIR)/eap_psk_common.Tpo -c -o eap_psk_common.lo `test -f 'src/eap_common/eap_psk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_psk_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_psk_common.Tpo $(DEPDIR)/eap_psk_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_psk_common.c' object='eap_psk_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_psk_common.lo `test -f 'src/eap_common/eap_psk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_psk_common.c
 +
 +eap_pax_common.lo: src/eap_common/eap_pax_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_pax_common.lo -MD -MP -MF $(DEPDIR)/eap_pax_common.Tpo -c -o eap_pax_common.lo `test -f 'src/eap_common/eap_pax_common.c' || echo '$(srcdir)/'`src/eap_common/eap_pax_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_pax_common.Tpo $(DEPDIR)/eap_pax_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_pax_common.c' object='eap_pax_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_pax_common.lo `test -f 'src/eap_common/eap_pax_common.c' || echo '$(srcdir)/'`src/eap_common/eap_pax_common.c
 +
 +eap_sake_common.lo: src/eap_common/eap_sake_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_sake_common.lo -MD -MP -MF $(DEPDIR)/eap_sake_common.Tpo -c -o eap_sake_common.lo `test -f 'src/eap_common/eap_sake_common.c' || echo '$(srcdir)/'`src/eap_common/eap_sake_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_sake_common.Tpo $(DEPDIR)/eap_sake_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_sake_common.c' object='eap_sake_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_sake_common.lo `test -f 'src/eap_common/eap_sake_common.c' || echo '$(srcdir)/'`src/eap_common/eap_sake_common.c
 +
 +eap_gpsk_common.lo: src/eap_common/eap_gpsk_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gpsk_common.lo -MD -MP -MF $(DEPDIR)/eap_gpsk_common.Tpo -c -o eap_gpsk_common.lo `test -f 'src/eap_common/eap_gpsk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_gpsk_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gpsk_common.Tpo $(DEPDIR)/eap_gpsk_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_gpsk_common.c' object='eap_gpsk_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gpsk_common.lo `test -f 'src/eap_common/eap_gpsk_common.c' || echo '$(srcdir)/'`src/eap_common/eap_gpsk_common.c
 +
 +chap.lo: src/eap_common/chap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT chap.lo -MD -MP -MF $(DEPDIR)/chap.Tpo -c -o chap.lo `test -f 'src/eap_common/chap.c' || echo '$(srcdir)/'`src/eap_common/chap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/chap.Tpo $(DEPDIR)/chap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/chap.c' object='chap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o chap.lo `test -f 'src/eap_common/chap.c' || echo '$(srcdir)/'`src/eap_common/chap.c
 +
 +eap_tls.lo: src/eap_peer/eap_tls.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_tls.lo -MD -MP -MF $(DEPDIR)/eap_tls.Tpo -c -o eap_tls.lo `test -f 'src/eap_peer/eap_tls.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_tls.Tpo $(DEPDIR)/eap_tls.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_tls.c' object='eap_tls.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_tls.lo `test -f 'src/eap_peer/eap_tls.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls.c
 +
 +eap_peap.lo: src/eap_peer/eap_peap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_peap.lo -MD -MP -MF $(DEPDIR)/eap_peap.Tpo -c -o eap_peap.lo `test -f 'src/eap_peer/eap_peap.c' || echo '$(srcdir)/'`src/eap_peer/eap_peap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_peap.Tpo $(DEPDIR)/eap_peap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_peap.c' object='eap_peap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_peap.lo `test -f 'src/eap_peer/eap_peap.c' || echo '$(srcdir)/'`src/eap_peer/eap_peap.c
 +
 +eap_ttls.lo: src/eap_peer/eap_ttls.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_ttls.lo -MD -MP -MF $(DEPDIR)/eap_ttls.Tpo -c -o eap_ttls.lo `test -f 'src/eap_peer/eap_ttls.c' || echo '$(srcdir)/'`src/eap_peer/eap_ttls.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_ttls.Tpo $(DEPDIR)/eap_ttls.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_ttls.c' object='eap_ttls.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_ttls.lo `test -f 'src/eap_peer/eap_ttls.c' || echo '$(srcdir)/'`src/eap_peer/eap_ttls.c
 +
 +eap_md5.lo: src/eap_peer/eap_md5.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_md5.lo -MD -MP -MF $(DEPDIR)/eap_md5.Tpo -c -o eap_md5.lo `test -f 'src/eap_peer/eap_md5.c' || echo '$(srcdir)/'`src/eap_peer/eap_md5.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_md5.Tpo $(DEPDIR)/eap_md5.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_md5.c' object='eap_md5.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_md5.lo `test -f 'src/eap_peer/eap_md5.c' || echo '$(srcdir)/'`src/eap_peer/eap_md5.c
 +
 +eap_mschapv2.lo: src/eap_peer/eap_mschapv2.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_mschapv2.lo -MD -MP -MF $(DEPDIR)/eap_mschapv2.Tpo -c -o eap_mschapv2.lo `test -f 'src/eap_peer/eap_mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/eap_mschapv2.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_mschapv2.Tpo $(DEPDIR)/eap_mschapv2.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_mschapv2.c' object='eap_mschapv2.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_mschapv2.lo `test -f 'src/eap_peer/eap_mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/eap_mschapv2.c
 +
 +mschapv2.lo: src/eap_peer/mschapv2.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mschapv2.lo -MD -MP -MF $(DEPDIR)/mschapv2.Tpo -c -o mschapv2.lo `test -f 'src/eap_peer/mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/mschapv2.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mschapv2.Tpo $(DEPDIR)/mschapv2.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/mschapv2.c' object='mschapv2.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mschapv2.lo `test -f 'src/eap_peer/mschapv2.c' || echo '$(srcdir)/'`src/eap_peer/mschapv2.c
 +
 +eap_otp.lo: src/eap_peer/eap_otp.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_otp.lo -MD -MP -MF $(DEPDIR)/eap_otp.Tpo -c -o eap_otp.lo `test -f 'src/eap_peer/eap_otp.c' || echo '$(srcdir)/'`src/eap_peer/eap_otp.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_otp.Tpo $(DEPDIR)/eap_otp.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_otp.c' object='eap_otp.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_otp.lo `test -f 'src/eap_peer/eap_otp.c' || echo '$(srcdir)/'`src/eap_peer/eap_otp.c
 +
 +eap_gtc.lo: src/eap_peer/eap_gtc.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gtc.lo -MD -MP -MF $(DEPDIR)/eap_gtc.Tpo -c -o eap_gtc.lo `test -f 'src/eap_peer/eap_gtc.c' || echo '$(srcdir)/'`src/eap_peer/eap_gtc.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gtc.Tpo $(DEPDIR)/eap_gtc.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_gtc.c' object='eap_gtc.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gtc.lo `test -f 'src/eap_peer/eap_gtc.c' || echo '$(srcdir)/'`src/eap_peer/eap_gtc.c
 +
 +eap_leap.lo: src/eap_peer/eap_leap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_leap.lo -MD -MP -MF $(DEPDIR)/eap_leap.Tpo -c -o eap_leap.lo `test -f 'src/eap_peer/eap_leap.c' || echo '$(srcdir)/'`src/eap_peer/eap_leap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_leap.Tpo $(DEPDIR)/eap_leap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_leap.c' object='eap_leap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_leap.lo `test -f 'src/eap_peer/eap_leap.c' || echo '$(srcdir)/'`src/eap_peer/eap_leap.c
 +
 +eap_psk.lo: src/eap_peer/eap_psk.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_psk.lo -MD -MP -MF $(DEPDIR)/eap_psk.Tpo -c -o eap_psk.lo `test -f 'src/eap_peer/eap_psk.c' || echo '$(srcdir)/'`src/eap_peer/eap_psk.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_psk.Tpo $(DEPDIR)/eap_psk.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_psk.c' object='eap_psk.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_psk.lo `test -f 'src/eap_peer/eap_psk.c' || echo '$(srcdir)/'`src/eap_peer/eap_psk.c
 +
 +eap_pax.lo: src/eap_peer/eap_pax.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_pax.lo -MD -MP -MF $(DEPDIR)/eap_pax.Tpo -c -o eap_pax.lo `test -f 'src/eap_peer/eap_pax.c' || echo '$(srcdir)/'`src/eap_peer/eap_pax.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_pax.Tpo $(DEPDIR)/eap_pax.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_pax.c' object='eap_pax.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_pax.lo `test -f 'src/eap_peer/eap_pax.c' || echo '$(srcdir)/'`src/eap_peer/eap_pax.c
 +
 +eap_sake.lo: src/eap_peer/eap_sake.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_sake.lo -MD -MP -MF $(DEPDIR)/eap_sake.Tpo -c -o eap_sake.lo `test -f 'src/eap_peer/eap_sake.c' || echo '$(srcdir)/'`src/eap_peer/eap_sake.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_sake.Tpo $(DEPDIR)/eap_sake.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_sake.c' object='eap_sake.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_sake.lo `test -f 'src/eap_peer/eap_sake.c' || echo '$(srcdir)/'`src/eap_peer/eap_sake.c
 +
 +eap_gpsk.lo: src/eap_peer/eap_gpsk.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_gpsk.lo -MD -MP -MF $(DEPDIR)/eap_gpsk.Tpo -c -o eap_gpsk.lo `test -f 'src/eap_peer/eap_gpsk.c' || echo '$(srcdir)/'`src/eap_peer/eap_gpsk.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_gpsk.Tpo $(DEPDIR)/eap_gpsk.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_gpsk.c' object='eap_gpsk.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_gpsk.lo `test -f 'src/eap_peer/eap_gpsk.c' || echo '$(srcdir)/'`src/eap_peer/eap_gpsk.c
 +
 +eap.lo: src/eap_peer/eap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap.lo -MD -MP -MF $(DEPDIR)/eap.Tpo -c -o eap.lo `test -f 'src/eap_peer/eap.c' || echo '$(srcdir)/'`src/eap_peer/eap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap.Tpo $(DEPDIR)/eap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap.c' object='eap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap.lo `test -f 'src/eap_peer/eap.c' || echo '$(srcdir)/'`src/eap_peer/eap.c
 +
 +eap_common.lo: src/eap_common/eap_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_common.lo -MD -MP -MF $(DEPDIR)/eap_common.Tpo -c -o eap_common.lo `test -f 'src/eap_common/eap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_common.Tpo $(DEPDIR)/eap_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_common/eap_common.c' object='eap_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_common.lo `test -f 'src/eap_common/eap_common.c' || echo '$(srcdir)/'`src/eap_common/eap_common.c
 +
 +eap_methods.lo: src/eap_peer/eap_methods.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_methods.lo -MD -MP -MF $(DEPDIR)/eap_methods.Tpo -c -o eap_methods.lo `test -f 'src/eap_peer/eap_methods.c' || echo '$(srcdir)/'`src/eap_peer/eap_methods.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_methods.Tpo $(DEPDIR)/eap_methods.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_methods.c' object='eap_methods.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_methods.lo `test -f 'src/eap_peer/eap_methods.c' || echo '$(srcdir)/'`src/eap_peer/eap_methods.c
 +
 +eap_tls_common.lo: src/eap_peer/eap_tls_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT eap_tls_common.lo -MD -MP -MF $(DEPDIR)/eap_tls_common.Tpo -c -o eap_tls_common.lo `test -f 'src/eap_peer/eap_tls_common.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/eap_tls_common.Tpo $(DEPDIR)/eap_tls_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/eap_peer/eap_tls_common.c' object='eap_tls_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o eap_tls_common.lo `test -f 'src/eap_peer/eap_tls_common.c' || echo '$(srcdir)/'`src/eap_peer/eap_tls_common.c
 +
 +base64.lo: src/utils/base64.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT base64.lo -MD -MP -MF $(DEPDIR)/base64.Tpo -c -o base64.lo `test -f 'src/utils/base64.c' || echo '$(srcdir)/'`src/utils/base64.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/base64.Tpo $(DEPDIR)/base64.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/base64.c' object='base64.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o base64.lo `test -f 'src/utils/base64.c' || echo '$(srcdir)/'`src/utils/base64.c
 +
 +common.lo: src/utils/common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common.lo -MD -MP -MF $(DEPDIR)/common.Tpo -c -o common.lo `test -f 'src/utils/common.c' || echo '$(srcdir)/'`src/utils/common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/common.Tpo $(DEPDIR)/common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/common.c' object='common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common.lo `test -f 'src/utils/common.c' || echo '$(srcdir)/'`src/utils/common.c
 +
 +ip_addr.lo: src/utils/ip_addr.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ip_addr.lo -MD -MP -MF $(DEPDIR)/ip_addr.Tpo -c -o ip_addr.lo `test -f 'src/utils/ip_addr.c' || echo '$(srcdir)/'`src/utils/ip_addr.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/ip_addr.Tpo $(DEPDIR)/ip_addr.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/ip_addr.c' object='ip_addr.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ip_addr.lo `test -f 'src/utils/ip_addr.c' || echo '$(srcdir)/'`src/utils/ip_addr.c
 +
 +radiotap.lo: src/utils/radiotap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT radiotap.lo -MD -MP -MF $(DEPDIR)/radiotap.Tpo -c -o radiotap.lo `test -f 'src/utils/radiotap.c' || echo '$(srcdir)/'`src/utils/radiotap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/radiotap.Tpo $(DEPDIR)/radiotap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/radiotap.c' object='radiotap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o radiotap.lo `test -f 'src/utils/radiotap.c' || echo '$(srcdir)/'`src/utils/radiotap.c
 +
 +trace.lo: src/utils/trace.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT trace.lo -MD -MP -MF $(DEPDIR)/trace.Tpo -c -o trace.lo `test -f 'src/utils/trace.c' || echo '$(srcdir)/'`src/utils/trace.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/trace.Tpo $(DEPDIR)/trace.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/trace.c' object='trace.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o trace.lo `test -f 'src/utils/trace.c' || echo '$(srcdir)/'`src/utils/trace.c
 +
 +uuid.lo: src/utils/uuid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT uuid.lo -MD -MP -MF $(DEPDIR)/uuid.Tpo -c -o uuid.lo `test -f 'src/utils/uuid.c' || echo '$(srcdir)/'`src/utils/uuid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/uuid.Tpo $(DEPDIR)/uuid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/uuid.c' object='uuid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o uuid.lo `test -f 'src/utils/uuid.c' || echo '$(srcdir)/'`src/utils/uuid.c
 +
 +wpa_debug.lo: src/utils/wpa_debug.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT wpa_debug.lo -MD -MP -MF $(DEPDIR)/wpa_debug.Tpo -c -o wpa_debug.lo `test -f 'src/utils/wpa_debug.c' || echo '$(srcdir)/'`src/utils/wpa_debug.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/wpa_debug.Tpo $(DEPDIR)/wpa_debug.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/wpa_debug.c' object='wpa_debug.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o wpa_debug.lo `test -f 'src/utils/wpa_debug.c' || echo '$(srcdir)/'`src/utils/wpa_debug.c
 +
 +wpabuf.lo: src/utils/wpabuf.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT wpabuf.lo -MD -MP -MF $(DEPDIR)/wpabuf.Tpo -c -o wpabuf.lo `test -f 'src/utils/wpabuf.c' || echo '$(srcdir)/'`src/utils/wpabuf.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/wpabuf.Tpo $(DEPDIR)/wpabuf.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/wpabuf.c' object='wpabuf.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o wpabuf.lo `test -f 'src/utils/wpabuf.c' || echo '$(srcdir)/'`src/utils/wpabuf.c
 +
 +os_unix.lo: src/utils/os_unix.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT os_unix.lo -MD -MP -MF $(DEPDIR)/os_unix.Tpo -c -o os_unix.lo `test -f 'src/utils/os_unix.c' || echo '$(srcdir)/'`src/utils/os_unix.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/os_unix.Tpo $(DEPDIR)/os_unix.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/utils/os_unix.c' object='os_unix.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o os_unix.lo `test -f 'src/utils/os_unix.c' || echo '$(srcdir)/'`src/utils/os_unix.c
 +
 +aes-cbc.lo: src/crypto/aes-cbc.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-cbc.lo -MD -MP -MF $(DEPDIR)/aes-cbc.Tpo -c -o aes-cbc.lo `test -f 'src/crypto/aes-cbc.c' || echo '$(srcdir)/'`src/crypto/aes-cbc.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-cbc.Tpo $(DEPDIR)/aes-cbc.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-cbc.c' object='aes-cbc.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-cbc.lo `test -f 'src/crypto/aes-cbc.c' || echo '$(srcdir)/'`src/crypto/aes-cbc.c
 +
 +aes-ctr.lo: src/crypto/aes-ctr.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-ctr.lo -MD -MP -MF $(DEPDIR)/aes-ctr.Tpo -c -o aes-ctr.lo `test -f 'src/crypto/aes-ctr.c' || echo '$(srcdir)/'`src/crypto/aes-ctr.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-ctr.Tpo $(DEPDIR)/aes-ctr.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-ctr.c' object='aes-ctr.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-ctr.lo `test -f 'src/crypto/aes-ctr.c' || echo '$(srcdir)/'`src/crypto/aes-ctr.c
 +
 +aes-eax.lo: src/crypto/aes-eax.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-eax.lo -MD -MP -MF $(DEPDIR)/aes-eax.Tpo -c -o aes-eax.lo `test -f 'src/crypto/aes-eax.c' || echo '$(srcdir)/'`src/crypto/aes-eax.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-eax.Tpo $(DEPDIR)/aes-eax.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-eax.c' object='aes-eax.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-eax.lo `test -f 'src/crypto/aes-eax.c' || echo '$(srcdir)/'`src/crypto/aes-eax.c
 +
 +aes-encblock.lo: src/crypto/aes-encblock.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-encblock.lo -MD -MP -MF $(DEPDIR)/aes-encblock.Tpo -c -o aes-encblock.lo `test -f 'src/crypto/aes-encblock.c' || echo '$(srcdir)/'`src/crypto/aes-encblock.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-encblock.Tpo $(DEPDIR)/aes-encblock.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-encblock.c' object='aes-encblock.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-encblock.lo `test -f 'src/crypto/aes-encblock.c' || echo '$(srcdir)/'`src/crypto/aes-encblock.c
 +
 +aes-internal.lo: src/crypto/aes-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal.lo -MD -MP -MF $(DEPDIR)/aes-internal.Tpo -c -o aes-internal.lo `test -f 'src/crypto/aes-internal.c' || echo '$(srcdir)/'`src/crypto/aes-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal.Tpo $(DEPDIR)/aes-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal.c' object='aes-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal.lo `test -f 'src/crypto/aes-internal.c' || echo '$(srcdir)/'`src/crypto/aes-internal.c
 +
 +aes-internal-dec.lo: src/crypto/aes-internal-dec.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal-dec.lo -MD -MP -MF $(DEPDIR)/aes-internal-dec.Tpo -c -o aes-internal-dec.lo `test -f 'src/crypto/aes-internal-dec.c' || echo '$(srcdir)/'`src/crypto/aes-internal-dec.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal-dec.Tpo $(DEPDIR)/aes-internal-dec.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal-dec.c' object='aes-internal-dec.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal-dec.lo `test -f 'src/crypto/aes-internal-dec.c' || echo '$(srcdir)/'`src/crypto/aes-internal-dec.c
 +
 +aes-internal-enc.lo: src/crypto/aes-internal-enc.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-internal-enc.lo -MD -MP -MF $(DEPDIR)/aes-internal-enc.Tpo -c -o aes-internal-enc.lo `test -f 'src/crypto/aes-internal-enc.c' || echo '$(srcdir)/'`src/crypto/aes-internal-enc.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-internal-enc.Tpo $(DEPDIR)/aes-internal-enc.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-internal-enc.c' object='aes-internal-enc.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-internal-enc.lo `test -f 'src/crypto/aes-internal-enc.c' || echo '$(srcdir)/'`src/crypto/aes-internal-enc.c
 +
 +aes-omac1.lo: src/crypto/aes-omac1.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-omac1.lo -MD -MP -MF $(DEPDIR)/aes-omac1.Tpo -c -o aes-omac1.lo `test -f 'src/crypto/aes-omac1.c' || echo '$(srcdir)/'`src/crypto/aes-omac1.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-omac1.Tpo $(DEPDIR)/aes-omac1.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-omac1.c' object='aes-omac1.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-omac1.lo `test -f 'src/crypto/aes-omac1.c' || echo '$(srcdir)/'`src/crypto/aes-omac1.c
 +
 +aes-unwrap.lo: src/crypto/aes-unwrap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-unwrap.lo -MD -MP -MF $(DEPDIR)/aes-unwrap.Tpo -c -o aes-unwrap.lo `test -f 'src/crypto/aes-unwrap.c' || echo '$(srcdir)/'`src/crypto/aes-unwrap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-unwrap.Tpo $(DEPDIR)/aes-unwrap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-unwrap.c' object='aes-unwrap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-unwrap.lo `test -f 'src/crypto/aes-unwrap.c' || echo '$(srcdir)/'`src/crypto/aes-unwrap.c
 +
 +aes-wrap.lo: src/crypto/aes-wrap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aes-wrap.lo -MD -MP -MF $(DEPDIR)/aes-wrap.Tpo -c -o aes-wrap.lo `test -f 'src/crypto/aes-wrap.c' || echo '$(srcdir)/'`src/crypto/aes-wrap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/aes-wrap.Tpo $(DEPDIR)/aes-wrap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/aes-wrap.c' object='aes-wrap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aes-wrap.lo `test -f 'src/crypto/aes-wrap.c' || echo '$(srcdir)/'`src/crypto/aes-wrap.c
 +
 +des-internal.lo: src/crypto/des-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT des-internal.lo -MD -MP -MF $(DEPDIR)/des-internal.Tpo -c -o des-internal.lo `test -f 'src/crypto/des-internal.c' || echo '$(srcdir)/'`src/crypto/des-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/des-internal.Tpo $(DEPDIR)/des-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/des-internal.c' object='des-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o des-internal.lo `test -f 'src/crypto/des-internal.c' || echo '$(srcdir)/'`src/crypto/des-internal.c
 +
 +dh_group5.lo: src/crypto/dh_group5.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dh_group5.lo -MD -MP -MF $(DEPDIR)/dh_group5.Tpo -c -o dh_group5.lo `test -f 'src/crypto/dh_group5.c' || echo '$(srcdir)/'`src/crypto/dh_group5.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/dh_group5.Tpo $(DEPDIR)/dh_group5.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/dh_group5.c' object='dh_group5.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dh_group5.lo `test -f 'src/crypto/dh_group5.c' || echo '$(srcdir)/'`src/crypto/dh_group5.c
 +
 +dh_groups.lo: src/crypto/dh_groups.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dh_groups.lo -MD -MP -MF $(DEPDIR)/dh_groups.Tpo -c -o dh_groups.lo `test -f 'src/crypto/dh_groups.c' || echo '$(srcdir)/'`src/crypto/dh_groups.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/dh_groups.Tpo $(DEPDIR)/dh_groups.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/dh_groups.c' object='dh_groups.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dh_groups.lo `test -f 'src/crypto/dh_groups.c' || echo '$(srcdir)/'`src/crypto/dh_groups.c
 +
 +md4-internal.lo: src/crypto/md4-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md4-internal.lo -MD -MP -MF $(DEPDIR)/md4-internal.Tpo -c -o md4-internal.lo `test -f 'src/crypto/md4-internal.c' || echo '$(srcdir)/'`src/crypto/md4-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md4-internal.Tpo $(DEPDIR)/md4-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md4-internal.c' object='md4-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md4-internal.lo `test -f 'src/crypto/md4-internal.c' || echo '$(srcdir)/'`src/crypto/md4-internal.c
 +
 +md5.lo: src/crypto/md5.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5.lo -MD -MP -MF $(DEPDIR)/md5.Tpo -c -o md5.lo `test -f 'src/crypto/md5.c' || echo '$(srcdir)/'`src/crypto/md5.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5.Tpo $(DEPDIR)/md5.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5.c' object='md5.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5.lo `test -f 'src/crypto/md5.c' || echo '$(srcdir)/'`src/crypto/md5.c
 +
 +md5-internal.lo: src/crypto/md5-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5-internal.lo -MD -MP -MF $(DEPDIR)/md5-internal.Tpo -c -o md5-internal.lo `test -f 'src/crypto/md5-internal.c' || echo '$(srcdir)/'`src/crypto/md5-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5-internal.Tpo $(DEPDIR)/md5-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5-internal.c' object='md5-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5-internal.lo `test -f 'src/crypto/md5-internal.c' || echo '$(srcdir)/'`src/crypto/md5-internal.c
 +
 +md5-non-fips.lo: src/crypto/md5-non-fips.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT md5-non-fips.lo -MD -MP -MF $(DEPDIR)/md5-non-fips.Tpo -c -o md5-non-fips.lo `test -f 'src/crypto/md5-non-fips.c' || echo '$(srcdir)/'`src/crypto/md5-non-fips.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/md5-non-fips.Tpo $(DEPDIR)/md5-non-fips.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/md5-non-fips.c' object='md5-non-fips.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o md5-non-fips.lo `test -f 'src/crypto/md5-non-fips.c' || echo '$(srcdir)/'`src/crypto/md5-non-fips.c
 +
 +milenage.lo: src/crypto/milenage.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT milenage.lo -MD -MP -MF $(DEPDIR)/milenage.Tpo -c -o milenage.lo `test -f 'src/crypto/milenage.c' || echo '$(srcdir)/'`src/crypto/milenage.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/milenage.Tpo $(DEPDIR)/milenage.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/milenage.c' object='milenage.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o milenage.lo `test -f 'src/crypto/milenage.c' || echo '$(srcdir)/'`src/crypto/milenage.c
 +
 +ms_funcs.lo: src/crypto/ms_funcs.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ms_funcs.lo -MD -MP -MF $(DEPDIR)/ms_funcs.Tpo -c -o ms_funcs.lo `test -f 'src/crypto/ms_funcs.c' || echo '$(srcdir)/'`src/crypto/ms_funcs.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/ms_funcs.Tpo $(DEPDIR)/ms_funcs.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/ms_funcs.c' object='ms_funcs.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ms_funcs.lo `test -f 'src/crypto/ms_funcs.c' || echo '$(srcdir)/'`src/crypto/ms_funcs.c
 +
 +rc4.lo: src/crypto/rc4.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rc4.lo -MD -MP -MF $(DEPDIR)/rc4.Tpo -c -o rc4.lo `test -f 'src/crypto/rc4.c' || echo '$(srcdir)/'`src/crypto/rc4.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/rc4.Tpo $(DEPDIR)/rc4.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/rc4.c' object='rc4.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rc4.lo `test -f 'src/crypto/rc4.c' || echo '$(srcdir)/'`src/crypto/rc4.c
 +
 +sha1.lo: src/crypto/sha1.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1.lo -MD -MP -MF $(DEPDIR)/sha1.Tpo -c -o sha1.lo `test -f 'src/crypto/sha1.c' || echo '$(srcdir)/'`src/crypto/sha1.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1.Tpo $(DEPDIR)/sha1.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1.c' object='sha1.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1.lo `test -f 'src/crypto/sha1.c' || echo '$(srcdir)/'`src/crypto/sha1.c
 +
 +sha1-internal.lo: src/crypto/sha1-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-internal.lo -MD -MP -MF $(DEPDIR)/sha1-internal.Tpo -c -o sha1-internal.lo `test -f 'src/crypto/sha1-internal.c' || echo '$(srcdir)/'`src/crypto/sha1-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-internal.Tpo $(DEPDIR)/sha1-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-internal.c' object='sha1-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-internal.lo `test -f 'src/crypto/sha1-internal.c' || echo '$(srcdir)/'`src/crypto/sha1-internal.c
 +
 +sha1-pbkdf2.lo: src/crypto/sha1-pbkdf2.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-pbkdf2.lo -MD -MP -MF $(DEPDIR)/sha1-pbkdf2.Tpo -c -o sha1-pbkdf2.lo `test -f 'src/crypto/sha1-pbkdf2.c' || echo '$(srcdir)/'`src/crypto/sha1-pbkdf2.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-pbkdf2.Tpo $(DEPDIR)/sha1-pbkdf2.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-pbkdf2.c' object='sha1-pbkdf2.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-pbkdf2.lo `test -f 'src/crypto/sha1-pbkdf2.c' || echo '$(srcdir)/'`src/crypto/sha1-pbkdf2.c
 +
 +sha1-tlsprf.lo: src/crypto/sha1-tlsprf.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-tlsprf.lo -MD -MP -MF $(DEPDIR)/sha1-tlsprf.Tpo -c -o sha1-tlsprf.lo `test -f 'src/crypto/sha1-tlsprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tlsprf.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-tlsprf.Tpo $(DEPDIR)/sha1-tlsprf.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-tlsprf.c' object='sha1-tlsprf.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-tlsprf.lo `test -f 'src/crypto/sha1-tlsprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tlsprf.c
 +
 +sha1-tprf.lo: src/crypto/sha1-tprf.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha1-tprf.lo -MD -MP -MF $(DEPDIR)/sha1-tprf.Tpo -c -o sha1-tprf.lo `test -f 'src/crypto/sha1-tprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tprf.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha1-tprf.Tpo $(DEPDIR)/sha1-tprf.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha1-tprf.c' object='sha1-tprf.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha1-tprf.lo `test -f 'src/crypto/sha1-tprf.c' || echo '$(srcdir)/'`src/crypto/sha1-tprf.c
 +
 +sha256.lo: src/crypto/sha256.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha256.lo -MD -MP -MF $(DEPDIR)/sha256.Tpo -c -o sha256.lo `test -f 'src/crypto/sha256.c' || echo '$(srcdir)/'`src/crypto/sha256.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha256.Tpo $(DEPDIR)/sha256.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha256.c' object='sha256.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha256.lo `test -f 'src/crypto/sha256.c' || echo '$(srcdir)/'`src/crypto/sha256.c
 +
 +sha256-internal.lo: src/crypto/sha256-internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT sha256-internal.lo -MD -MP -MF $(DEPDIR)/sha256-internal.Tpo -c -o sha256-internal.lo `test -f 'src/crypto/sha256-internal.c' || echo '$(srcdir)/'`src/crypto/sha256-internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/sha256-internal.Tpo $(DEPDIR)/sha256-internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/sha256-internal.c' object='sha256-internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o sha256-internal.lo `test -f 'src/crypto/sha256-internal.c' || echo '$(srcdir)/'`src/crypto/sha256-internal.c
 +
 +crypto_internal.lo: src/crypto/crypto_internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal.lo -MD -MP -MF $(DEPDIR)/crypto_internal.Tpo -c -o crypto_internal.lo `test -f 'src/crypto/crypto_internal.c' || echo '$(srcdir)/'`src/crypto/crypto_internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal.Tpo $(DEPDIR)/crypto_internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal.c' object='crypto_internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal.lo `test -f 'src/crypto/crypto_internal.c' || echo '$(srcdir)/'`src/crypto/crypto_internal.c
 +
 +crypto_internal-cipher.lo: src/crypto/crypto_internal-cipher.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-cipher.lo -MD -MP -MF $(DEPDIR)/crypto_internal-cipher.Tpo -c -o crypto_internal-cipher.lo `test -f 'src/crypto/crypto_internal-cipher.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-cipher.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-cipher.Tpo $(DEPDIR)/crypto_internal-cipher.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-cipher.c' object='crypto_internal-cipher.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-cipher.lo `test -f 'src/crypto/crypto_internal-cipher.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-cipher.c
 +
 +crypto_internal-modexp.lo: src/crypto/crypto_internal-modexp.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-modexp.lo -MD -MP -MF $(DEPDIR)/crypto_internal-modexp.Tpo -c -o crypto_internal-modexp.lo `test -f 'src/crypto/crypto_internal-modexp.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-modexp.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-modexp.Tpo $(DEPDIR)/crypto_internal-modexp.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-modexp.c' object='crypto_internal-modexp.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-modexp.lo `test -f 'src/crypto/crypto_internal-modexp.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-modexp.c
 +
 +crypto_internal-rsa.lo: src/crypto/crypto_internal-rsa.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto_internal-rsa.lo -MD -MP -MF $(DEPDIR)/crypto_internal-rsa.Tpo -c -o crypto_internal-rsa.lo `test -f 'src/crypto/crypto_internal-rsa.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-rsa.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/crypto_internal-rsa.Tpo $(DEPDIR)/crypto_internal-rsa.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/crypto_internal-rsa.c' object='crypto_internal-rsa.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto_internal-rsa.lo `test -f 'src/crypto/crypto_internal-rsa.c' || echo '$(srcdir)/'`src/crypto/crypto_internal-rsa.c
 +
 +tls_internal.lo: src/crypto/tls_internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tls_internal.lo -MD -MP -MF $(DEPDIR)/tls_internal.Tpo -c -o tls_internal.lo `test -f 'src/crypto/tls_internal.c' || echo '$(srcdir)/'`src/crypto/tls_internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tls_internal.Tpo $(DEPDIR)/tls_internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/tls_internal.c' object='tls_internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tls_internal.lo `test -f 'src/crypto/tls_internal.c' || echo '$(srcdir)/'`src/crypto/tls_internal.c
 +
 +fips_prf_internal.lo: src/crypto/fips_prf_internal.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT fips_prf_internal.lo -MD -MP -MF $(DEPDIR)/fips_prf_internal.Tpo -c -o fips_prf_internal.lo `test -f 'src/crypto/fips_prf_internal.c' || echo '$(srcdir)/'`src/crypto/fips_prf_internal.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/fips_prf_internal.Tpo $(DEPDIR)/fips_prf_internal.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/crypto/fips_prf_internal.c' object='fips_prf_internal.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o fips_prf_internal.lo `test -f 'src/crypto/fips_prf_internal.c' || echo '$(srcdir)/'`src/crypto/fips_prf_internal.c
 +
 +asn1.lo: src/tls/asn1.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT asn1.lo -MD -MP -MF $(DEPDIR)/asn1.Tpo -c -o asn1.lo `test -f 'src/tls/asn1.c' || echo '$(srcdir)/'`src/tls/asn1.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/asn1.Tpo $(DEPDIR)/asn1.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/asn1.c' object='asn1.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o asn1.lo `test -f 'src/tls/asn1.c' || echo '$(srcdir)/'`src/tls/asn1.c
 +
 +bignum.lo: src/tls/bignum.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT bignum.lo -MD -MP -MF $(DEPDIR)/bignum.Tpo -c -o bignum.lo `test -f 'src/tls/bignum.c' || echo '$(srcdir)/'`src/tls/bignum.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/bignum.Tpo $(DEPDIR)/bignum.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/bignum.c' object='bignum.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o bignum.lo `test -f 'src/tls/bignum.c' || echo '$(srcdir)/'`src/tls/bignum.c
 +
 +pkcs1.lo: src/tls/pkcs1.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs1.lo -MD -MP -MF $(DEPDIR)/pkcs1.Tpo -c -o pkcs1.lo `test -f 'src/tls/pkcs1.c' || echo '$(srcdir)/'`src/tls/pkcs1.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs1.Tpo $(DEPDIR)/pkcs1.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs1.c' object='pkcs1.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs1.lo `test -f 'src/tls/pkcs1.c' || echo '$(srcdir)/'`src/tls/pkcs1.c
 +
 +pkcs5.lo: src/tls/pkcs5.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs5.lo -MD -MP -MF $(DEPDIR)/pkcs5.Tpo -c -o pkcs5.lo `test -f 'src/tls/pkcs5.c' || echo '$(srcdir)/'`src/tls/pkcs5.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs5.Tpo $(DEPDIR)/pkcs5.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs5.c' object='pkcs5.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs5.lo `test -f 'src/tls/pkcs5.c' || echo '$(srcdir)/'`src/tls/pkcs5.c
 +
 +pkcs8.lo: src/tls/pkcs8.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT pkcs8.lo -MD -MP -MF $(DEPDIR)/pkcs8.Tpo -c -o pkcs8.lo `test -f 'src/tls/pkcs8.c' || echo '$(srcdir)/'`src/tls/pkcs8.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/pkcs8.Tpo $(DEPDIR)/pkcs8.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/pkcs8.c' object='pkcs8.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o pkcs8.lo `test -f 'src/tls/pkcs8.c' || echo '$(srcdir)/'`src/tls/pkcs8.c
 +
 +rsa.lo: src/tls/rsa.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rsa.lo -MD -MP -MF $(DEPDIR)/rsa.Tpo -c -o rsa.lo `test -f 'src/tls/rsa.c' || echo '$(srcdir)/'`src/tls/rsa.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/rsa.Tpo $(DEPDIR)/rsa.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/rsa.c' object='rsa.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rsa.lo `test -f 'src/tls/rsa.c' || echo '$(srcdir)/'`src/tls/rsa.c
 +
 +tlsv1_client.lo: src/tls/tlsv1_client.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client.lo -MD -MP -MF $(DEPDIR)/tlsv1_client.Tpo -c -o tlsv1_client.lo `test -f 'src/tls/tlsv1_client.c' || echo '$(srcdir)/'`src/tls/tlsv1_client.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client.Tpo $(DEPDIR)/tlsv1_client.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client.c' object='tlsv1_client.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client.lo `test -f 'src/tls/tlsv1_client.c' || echo '$(srcdir)/'`src/tls/tlsv1_client.c
 +
 +tlsv1_client_read.lo: src/tls/tlsv1_client_read.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client_read.lo -MD -MP -MF $(DEPDIR)/tlsv1_client_read.Tpo -c -o tlsv1_client_read.lo `test -f 'src/tls/tlsv1_client_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_read.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client_read.Tpo $(DEPDIR)/tlsv1_client_read.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client_read.c' object='tlsv1_client_read.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client_read.lo `test -f 'src/tls/tlsv1_client_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_read.c
 +
 +tlsv1_client_write.lo: src/tls/tlsv1_client_write.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_client_write.lo -MD -MP -MF $(DEPDIR)/tlsv1_client_write.Tpo -c -o tlsv1_client_write.lo `test -f 'src/tls/tlsv1_client_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_write.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_client_write.Tpo $(DEPDIR)/tlsv1_client_write.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_client_write.c' object='tlsv1_client_write.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_client_write.lo `test -f 'src/tls/tlsv1_client_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_client_write.c
 +
 +tlsv1_common.lo: src/tls/tlsv1_common.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_common.lo -MD -MP -MF $(DEPDIR)/tlsv1_common.Tpo -c -o tlsv1_common.lo `test -f 'src/tls/tlsv1_common.c' || echo '$(srcdir)/'`src/tls/tlsv1_common.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_common.Tpo $(DEPDIR)/tlsv1_common.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_common.c' object='tlsv1_common.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_common.lo `test -f 'src/tls/tlsv1_common.c' || echo '$(srcdir)/'`src/tls/tlsv1_common.c
 +
 +tlsv1_cred.lo: src/tls/tlsv1_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_cred.lo -MD -MP -MF $(DEPDIR)/tlsv1_cred.Tpo -c -o tlsv1_cred.lo `test -f 'src/tls/tlsv1_cred.c' || echo '$(srcdir)/'`src/tls/tlsv1_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_cred.Tpo $(DEPDIR)/tlsv1_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_cred.c' object='tlsv1_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_cred.lo `test -f 'src/tls/tlsv1_cred.c' || echo '$(srcdir)/'`src/tls/tlsv1_cred.c
 +
 +tlsv1_record.lo: src/tls/tlsv1_record.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_record.lo -MD -MP -MF $(DEPDIR)/tlsv1_record.Tpo -c -o tlsv1_record.lo `test -f 'src/tls/tlsv1_record.c' || echo '$(srcdir)/'`src/tls/tlsv1_record.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_record.Tpo $(DEPDIR)/tlsv1_record.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_record.c' object='tlsv1_record.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_record.lo `test -f 'src/tls/tlsv1_record.c' || echo '$(srcdir)/'`src/tls/tlsv1_record.c
 +
 +tlsv1_server.lo: src/tls/tlsv1_server.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server.lo -MD -MP -MF $(DEPDIR)/tlsv1_server.Tpo -c -o tlsv1_server.lo `test -f 'src/tls/tlsv1_server.c' || echo '$(srcdir)/'`src/tls/tlsv1_server.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server.Tpo $(DEPDIR)/tlsv1_server.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server.c' object='tlsv1_server.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server.lo `test -f 'src/tls/tlsv1_server.c' || echo '$(srcdir)/'`src/tls/tlsv1_server.c
 +
 +tlsv1_server_read.lo: src/tls/tlsv1_server_read.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server_read.lo -MD -MP -MF $(DEPDIR)/tlsv1_server_read.Tpo -c -o tlsv1_server_read.lo `test -f 'src/tls/tlsv1_server_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_read.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server_read.Tpo $(DEPDIR)/tlsv1_server_read.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server_read.c' object='tlsv1_server_read.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server_read.lo `test -f 'src/tls/tlsv1_server_read.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_read.c
 +
 +tlsv1_server_write.lo: src/tls/tlsv1_server_write.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tlsv1_server_write.lo -MD -MP -MF $(DEPDIR)/tlsv1_server_write.Tpo -c -o tlsv1_server_write.lo `test -f 'src/tls/tlsv1_server_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_write.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/tlsv1_server_write.Tpo $(DEPDIR)/tlsv1_server_write.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/tlsv1_server_write.c' object='tlsv1_server_write.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tlsv1_server_write.lo `test -f 'src/tls/tlsv1_server_write.c' || echo '$(srcdir)/'`src/tls/tlsv1_server_write.c
 +
 +x509v3.lo: src/tls/x509v3.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT x509v3.lo -MD -MP -MF $(DEPDIR)/x509v3.Tpo -c -o x509v3.lo `test -f 'src/tls/x509v3.c' || echo '$(srcdir)/'`src/tls/x509v3.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/x509v3.Tpo $(DEPDIR)/x509v3.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='src/tls/x509v3.c' object='x509v3.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o x509v3.lo `test -f 'src/tls/x509v3.c' || echo '$(srcdir)/'`src/tls/x509v3.c
 +
 +mostlyclean-libtool:
 +      -rm -f *.lo
 +
 +clean-libtool:
 +      -rm -rf .libs _libs
 +
 +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 +      list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      mkid -fID $$unique
 +tags: TAGS
 +
 +TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 +              $(TAGS_FILES) $(LISP)
 +      set x; \
 +      here=`pwd`; \
 +      list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      shift; \
 +      if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 +        test -n "$$unique" || unique=$$empty_fix; \
 +        if test $$# -gt 0; then \
 +          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 +            "$$@" $$unique; \
 +        else \
 +          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 +            $$unique; \
 +        fi; \
 +      fi
 +ctags: CTAGS
 +CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 +              $(TAGS_FILES) $(LISP)
 +      list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      test -z "$(CTAGS_ARGS)$$unique" \
 +        || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 +           $$unique
 +
 +GTAGS:
 +      here=`$(am__cd) $(top_builddir) && pwd` \
 +        && $(am__cd) $(top_srcdir) \
 +        && gtags -i $(GTAGS_ARGS) "$$here"
 +
 +distclean-tags:
 +      -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 +
 +distdir: $(DISTFILES)
 +      @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 +      topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 +      list='$(DISTFILES)'; \
 +        dist_files=`for file in $$list; do echo $$file; done | \
 +        sed -e "s|^$$srcdirstrip/||;t" \
 +            -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 +      case $$dist_files in \
 +        */*) $(MKDIR_P) `echo "$$dist_files" | \
 +                         sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 +                         sort -u` ;; \
 +      esac; \
 +      for file in $$dist_files; do \
 +        if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 +        if test -d $$d/$$file; then \
 +          dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 +          if test -d "$(distdir)/$$file"; then \
 +            find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 +          fi; \
 +          if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 +            cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 +            find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 +          fi; \
 +          cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 +        else \
 +          test -f "$(distdir)/$$file" \
 +          || cp -p $$d/$$file "$(distdir)/$$file" \
 +          || exit 1; \
 +        fi; \
 +      done
 +check-am: all-am
 +check: check-am
++all-am: Makefile $(LTLIBRARIES) $(HEADERS)
 +installdirs:
 +install: install-am
 +install-exec: install-exec-am
 +install-data: install-data-am
 +uninstall: uninstall-am
 +
 +install-am: all-am
 +      @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 +
 +installcheck: installcheck-am
 +install-strip:
 +      $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 +        install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 +        `test -z '$(STRIP)' || \
 +          echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 +mostlyclean-generic:
 +
 +clean-generic:
 +
 +distclean-generic:
 +      -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 +      -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 +
 +maintainer-clean-generic:
 +      @echo "This command is intended for maintainers to use"
 +      @echo "it deletes files that may require special tools to rebuild."
 +clean: clean-am
 +
 +clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
 +      mostlyclean-am
 +
 +distclean: distclean-am
 +      -rm -rf ./$(DEPDIR)
 +      -rm -f Makefile
 +distclean-am: clean-am distclean-compile distclean-generic \
 +      distclean-tags
 +
 +dvi: dvi-am
 +
 +dvi-am:
 +
 +html: html-am
 +
 +html-am:
 +
 +info: info-am
 +
 +info-am:
 +
 +install-data-am:
 +
 +install-dvi: install-dvi-am
 +
 +install-dvi-am:
 +
 +install-exec-am:
 +
 +install-html: install-html-am
 +
 +install-html-am:
 +
 +install-info: install-info-am
 +
 +install-info-am:
 +
 +install-man:
 +
 +install-pdf: install-pdf-am
 +
 +install-pdf-am:
 +
 +install-ps: install-ps-am
 +
 +install-ps-am:
 +
 +installcheck-am:
 +
 +maintainer-clean: maintainer-clean-am
 +      -rm -rf ./$(DEPDIR)
 +      -rm -f Makefile
 +maintainer-clean-am: distclean-am maintainer-clean-generic
 +
 +mostlyclean: mostlyclean-am
 +
 +mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 +      mostlyclean-libtool
 +
 +pdf: pdf-am
 +
 +pdf-am:
 +
 +ps: ps-am
 +
 +ps-am:
 +
 +uninstall-am:
 +
 +.MAKE: install-am install-strip
 +
 +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 +      clean-libtool clean-noinstLTLIBRARIES ctags distclean \
 +      distclean-compile distclean-generic distclean-libtool \
 +      distclean-tags distdir dvi dvi-am html html-am info info-am \
 +      install install-am install-data install-data-am install-dvi \
 +      install-dvi-am install-exec install-exec-am install-html \
 +      install-html-am install-info install-info-am install-man \
 +      install-pdf install-pdf-am install-ps install-ps-am \
 +      install-strip installcheck installcheck-am installdirs \
 +      maintainer-clean maintainer-clean-generic mostlyclean \
 +      mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 +      pdf pdf-am ps ps-am tags uninstall uninstall-am
 +
 +
 +# Tell versions [3.59,3.63) of GNU make to not export all variables.
 +# Otherwise a system limit (for SysV at least) may be exceeded.
 +.NOEXPORT:

diff --cc m4/libtool.m4
index 0000000,0000000..a3fee53
new file mode 100644 (file)
--- /dev/null
--- /dev/null
+++ b/m4/libtool.m4
@@@ -1,0 -1,0 +1,7377 @@@
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++#
++#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++#                 2006, 2007, 2008 Free Software Foundation, Inc.
++#   Written by Gordon Matzigkeit, 1996
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++m4_define([_LT_COPYING], [dnl
++#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
++#                 2006, 2007, 2008 Free Software Foundation, Inc.
++#   Written by Gordon Matzigkeit, 1996
++#
++#   This file is part of GNU Libtool.
++#
++# GNU Libtool is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# As a special exception to the GNU General Public License,
++# if you distribute this file as part of a program or library that
++# is built using GNU Libtool, you may include this file under the
++# same distribution terms that you use for the rest of that program.
++#
++# GNU Libtool is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with GNU Libtool; see the file COPYING.  If not, a copy
++# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
++# obtained by writing to the Free Software Foundation, Inc.,
++# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++])
++
++# serial 56 LT_INIT
++
++
++# LT_PREREQ(VERSION)
++# ------------------
++# Complain and exit if this libtool version is less that VERSION.
++m4_defun([LT_PREREQ],
++[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
++       [m4_default([$3],
++                 [m4_fatal([Libtool version $1 or higher is required],
++                           63)])],
++       [$2])])
++
++
++# _LT_CHECK_BUILDDIR
++# ------------------
++# Complain if the absolute build directory name contains unusual characters
++m4_defun([_LT_CHECK_BUILDDIR],
++[case `pwd` in
++  *\ * | *\   *)
++    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
++esac
++])
++
++
++# LT_INIT([OPTIONS])
++# ------------------
++AC_DEFUN([LT_INIT],
++[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
++AC_BEFORE([$0], [LT_LANG])dnl
++AC_BEFORE([$0], [LT_OUTPUT])dnl
++AC_BEFORE([$0], [LTDL_INIT])dnl
++m4_require([_LT_CHECK_BUILDDIR])dnl
++
++dnl Autoconf doesn't catch unexpanded LT_ macros by default:
++m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
++m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
++dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
++dnl unless we require an AC_DEFUNed macro:
++AC_REQUIRE([LTOPTIONS_VERSION])dnl
++AC_REQUIRE([LTSUGAR_VERSION])dnl
++AC_REQUIRE([LTVERSION_VERSION])dnl
++AC_REQUIRE([LTOBSOLETE_VERSION])dnl
++m4_require([_LT_PROG_LTMAIN])dnl
++
++dnl Parse OPTIONS
++_LT_SET_OPTIONS([$0], [$1])
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ltmain"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++_LT_SETUP
++
++# Only expand once:
++m4_define([LT_INIT])
++])# LT_INIT
++
++# Old names:
++AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
++AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
++dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
++m4_defun([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++  case $cc_temp in
++    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
++
++
++# _LT_FILEUTILS_DEFAULTS
++# ----------------------
++# It is okay to use these file commands and assume they have been set
++# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
++m4_defun([_LT_FILEUTILS_DEFAULTS],
++[: ${CP="cp -f"}
++: ${MV="mv -f"}
++: ${RM="rm -f"}
++])# _LT_FILEUTILS_DEFAULTS
++
++
++# _LT_SETUP
++# ---------
++m4_defun([_LT_SETUP],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++_LT_DECL([], [host_alias], [0], [The host system])dnl
++_LT_DECL([], [host], [0])dnl
++_LT_DECL([], [host_os], [0])dnl
++dnl
++_LT_DECL([], [build_alias], [0], [The build system])dnl
++_LT_DECL([], [build], [0])dnl
++_LT_DECL([], [build_os], [0])dnl
++dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++dnl
++AC_REQUIRE([AC_PROG_LN_S])dnl
++test -z "$LN_S" && LN_S="ln -s"
++_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
++dnl
++AC_REQUIRE([LT_CMD_MAX_LEN])dnl
++_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
++_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
++dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_CHECK_SHELL_FEATURES])dnl
++m4_require([_LT_CMD_RELOAD])dnl
++m4_require([_LT_CHECK_MAGIC_METHOD])dnl
++m4_require([_LT_CMD_OLD_ARCHIVE])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++
++_LT_CONFIG_LIBTOOL_INIT([
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes INIT.
++if test -n "\${ZSH_VERSION+set}" ; then
++   setopt NO_GLOB_SUBST
++fi
++])
++if test -n "${ZSH_VERSION+set}" ; then
++   setopt NO_GLOB_SUBST
++fi
++
++_LT_CHECK_OBJDIR
++
++m4_require([_LT_TAG_COMPILER])dnl
++_LT_PROG_ECHO_BACKSLASH
++
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
++
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([["`\\]]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to delay expansion of an escaped single quote.
++delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++# Global variables:
++ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$LD" && LD=ld
++test -z "$ac_objext" && ac_objext=o
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    _LT_PATH_MAGIC
++  fi
++  ;;
++esac
++
++# Use C for the default configuration in the libtool script
++LT_SUPPORTED_TAG([CC])
++_LT_LANG_C_CONFIG
++_LT_LANG_DEFAULT_CONFIG
++_LT_CONFIG_COMMANDS
++])# _LT_SETUP
++
++
++# _LT_PROG_LTMAIN
++# ---------------
++# Note that this code is called both from `configure', and `config.status'
++# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
++# `config.status' has no value for ac_aux_dir unless we are using Automake,
++# so we pass a copy along to make sure it has a sensible value anyway.
++m4_defun([_LT_PROG_LTMAIN],
++[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
++_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
++ltmain="$ac_aux_dir/ltmain.sh"
++])# _LT_PROG_LTMAIN
++
++
++## ------------------------------------- ##
++## Accumulate code for creating libtool. ##
++## ------------------------------------- ##
++
++# So that we can recreate a full libtool script including additional
++# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
++# in macros and then make a single call at the end using the `libtool'
++# label.
++
++
++# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
++# ----------------------------------------
++# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL_INIT],
++[m4_ifval([$1],
++          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
++                     [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_INIT])
++
++
++# _LT_CONFIG_LIBTOOL([COMMANDS])
++# ------------------------------
++# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
++m4_define([_LT_CONFIG_LIBTOOL],
++[m4_ifval([$1],
++          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
++                     [$1
++])])])
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
++
++
++# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
++# -----------------------------------------------------
++m4_defun([_LT_CONFIG_SAVE_COMMANDS],
++[_LT_CONFIG_LIBTOOL([$1])
++_LT_CONFIG_LIBTOOL_INIT([$2])
++])
++
++
++# _LT_FORMAT_COMMENT([COMMENT])
++# -----------------------------
++# Add leading comment marks to the start of each line, and a trailing
++# full-stop to the whole comment if one is not present already.
++m4_define([_LT_FORMAT_COMMENT],
++[m4_ifval([$1], [
++m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
++              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
++)])
++
++
++
++## ------------------------ ##
++## FIXME: Eliminate VARNAME ##
++## ------------------------ ##
++
++
++# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
++# -------------------------------------------------------------------
++# CONFIGNAME is the name given to the value in the libtool script.
++# VARNAME is the (base) name used in the configure script.
++# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
++# VARNAME.  Any other value will be used directly.
++m4_define([_LT_DECL],
++[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
++    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
++      [m4_ifval([$1], [$1], [$2])])
++    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
++    m4_ifval([$4],
++      [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
++    lt_dict_add_subkey([lt_decl_dict], [$2],
++      [tagged?], [m4_ifval([$5], [yes], [no])])])
++])
++
++
++# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
++# --------------------------------------------------------
++m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
++
++
++# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_tag_varnames],
++[_lt_decl_filter([tagged?], [yes], $@)])
++
++
++# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
++# ---------------------------------------------------------
++m4_define([_lt_decl_filter],
++[m4_case([$#],
++  [0], [m4_fatal([$0: too few arguments: $#])],
++  [1], [m4_fatal([$0: too few arguments: $#: $1])],
++  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
++  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
++  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
++])
++
++
++# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
++# --------------------------------------------------
++m4_define([lt_decl_quote_varnames],
++[_lt_decl_filter([value], [1], $@)])
++
++
++# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_dquote_varnames],
++[_lt_decl_filter([value], [2], $@)])
++
++
++# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
++# ---------------------------------------------------
++m4_define([lt_decl_varnames_tagged],
++[m4_assert([$# <= 2])dnl
++_$0(m4_quote(m4_default([$1], [[, ]])),
++    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
++    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
++m4_define([_lt_decl_varnames_tagged],
++[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
++
++
++# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
++# ------------------------------------------------
++m4_define([lt_decl_all_varnames],
++[_$0(m4_quote(m4_default([$1], [[, ]])),
++     m4_if([$2], [],
++         m4_quote(lt_decl_varnames),
++      m4_quote(m4_shift($@))))[]dnl
++])
++m4_define([_lt_decl_all_varnames],
++[lt_join($@, lt_decl_varnames_tagged([$1],
++                      lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
++])
++
++
++# _LT_CONFIG_STATUS_DECLARE([VARNAME])
++# ------------------------------------
++# Quote a variable value, and forward it to `config.status' so that its
++# declaration there will have the same value as in `configure'.  VARNAME
++# must have a single quote delimited value for this to work.
++m4_define([_LT_CONFIG_STATUS_DECLARE],
++[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
++
++
++# _LT_CONFIG_STATUS_DECLARATIONS
++# ------------------------------
++# We delimit libtool config variables with single quotes, so when
++# we write them to config.status, we have to be sure to quote all
++# embedded single quotes properly.  In configure, this macro expands
++# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
++#
++#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
++m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
++    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAGS
++# ----------------
++# Output comment and list of tags supported by the script
++m4_defun([_LT_LIBTOOL_TAGS],
++[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
++available_tags="_LT_TAGS"dnl
++])
++
++
++# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
++# -----------------------------------
++# Extract the dictionary values for VARNAME (optionally with TAG) and
++# expand to a commented shell variable setting:
++#
++#    # Some comment about what VAR is for.
++#    visible_name=$lt_internal_name
++m4_define([_LT_LIBTOOL_DECLARE],
++[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
++                                         [description])))[]dnl
++m4_pushdef([_libtool_name],
++    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
++m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
++    [0], [_libtool_name=[$]$1],
++    [1], [_libtool_name=$lt_[]$1],
++    [2], [_libtool_name=$lt_[]$1],
++    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
++m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
++])
++
++
++# _LT_LIBTOOL_CONFIG_VARS
++# -----------------------
++# Produce commented declarations of non-tagged libtool config variables
++# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
++# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
++# section) are produced by _LT_LIBTOOL_TAG_VARS.
++m4_defun([_LT_LIBTOOL_CONFIG_VARS],
++[m4_foreach([_lt_var],
++    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
++    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
++
++
++# _LT_LIBTOOL_TAG_VARS(TAG)
++# -------------------------
++m4_define([_LT_LIBTOOL_TAG_VARS],
++[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
++    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
++
++
++# _LT_TAGVAR(VARNAME, [TAGNAME])
++# ------------------------------
++m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
++
++
++# _LT_CONFIG_COMMANDS
++# -------------------
++# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
++# variables for single and double quote escaping we saved from calls
++# to _LT_DECL, we can put quote escaped variables declarations
++# into `config.status', and then the shell code to quote escape them in
++# for loops in `config.status'.  Finally, any additional code accumulated
++# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
++m4_defun([_LT_CONFIG_COMMANDS],
++[AC_PROVIDE_IFELSE([LT_OUTPUT],
++      dnl If the libtool generation code has been placed in $CONFIG_LT,
++      dnl instead of duplicating it all over again into config.status,
++      dnl then we will have config.status run $CONFIG_LT later, so it
++      dnl needs to know what name is stored there:
++        [AC_CONFIG_COMMANDS([libtool],
++            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
++    dnl If the libtool generation code is destined for config.status,
++    dnl expand the accumulated commands and init code now:
++    [AC_CONFIG_COMMANDS([libtool],
++        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
++])#_LT_CONFIG_COMMANDS
++
++
++# Initialize.
++m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
++[
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++sed_quote_subst='$sed_quote_subst'
++double_quote_subst='$double_quote_subst'
++delay_variable_subst='$delay_variable_subst'
++_LT_CONFIG_STATUS_DECLARATIONS
++LTCC='$LTCC'
++LTCFLAGS='$LTCFLAGS'
++compiler='$compiler_DEFAULT'
++
++# Quote evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_quote_varnames); do
++    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++    *[[\\\\\\\`\\"\\\$]]*)
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
++      ;;
++    *)
++      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++      ;;
++    esac
++done
++
++# Double-quote double-evaled strings.
++for var in lt_decl_all_varnames([[ \
++]], lt_decl_dquote_varnames); do
++    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
++    *[[\\\\\\\`\\"\\\$]]*)
++      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
++      ;;
++    *)
++      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
++      ;;
++    esac
++done
++
++# Fix-up fallback echo if it was mangled by the above quoting rules.
++case \$lt_ECHO in
++*'\\\[$]0 --fallback-echo"')dnl "
++  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
++  ;;
++esac
++
++_LT_OUTPUT_LIBTOOL_INIT
++])
++
++
++# LT_OUTPUT
++# ---------
++# This macro allows early generation of the libtool script (before
++# AC_OUTPUT is called), incase it is used in configure for compilation
++# tests.
++AC_DEFUN([LT_OUTPUT],
++[: ${CONFIG_LT=./config.lt}
++AC_MSG_NOTICE([creating $CONFIG_LT])
++cat >"$CONFIG_LT" <<_LTEOF
++#! $SHELL
++# Generated by $as_me.
++# Run this file to recreate a libtool stub with the current configuration.
++
++lt_cl_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AS_SHELL_SANITIZE
++_AS_PREPARE
++
++exec AS_MESSAGE_FD>&1
++exec AS_MESSAGE_LOG_FD>>config.log
++{
++  echo
++  AS_BOX([Running $as_me.])
++} >&AS_MESSAGE_LOG_FD
++
++lt_cl_help="\
++\`$as_me' creates a local libtool stub from the current configuration,
++for use in further configure time tests before the real libtool is
++generated.
++
++Usage: $[0] [[OPTIONS]]
++
++  -h, --help      print this help, then exit
++  -V, --version   print version number, then exit
++  -q, --quiet     do not print progress messages
++  -d, --debug     don't remove temporary files
++
++Report bugs to <bug-libtool@gnu.org>."
++
++lt_cl_version="\
++m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
++m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
++configured by $[0], generated by m4_PACKAGE_STRING.
++
++Copyright (C) 2008 Free Software Foundation, Inc.
++This config.lt script is free software; the Free Software Foundation
++gives unlimited permision to copy, distribute and modify it."
++
++while test $[#] != 0
++do
++  case $[1] in
++    --version | --v* | -V )
++      echo "$lt_cl_version"; exit 0 ;;
++    --help | --h* | -h )
++      echo "$lt_cl_help"; exit 0 ;;
++    --debug | --d* | -d )
++      debug=: ;;
++    --quiet | --q* | --silent | --s* | -q )
++      lt_cl_silent=: ;;
++
++    -*) AC_MSG_ERROR([unrecognized option: $[1]
++Try \`$[0] --help' for more information.]) ;;
++
++    *) AC_MSG_ERROR([unrecognized argument: $[1]
++Try \`$[0] --help' for more information.]) ;;
++  esac
++  shift
++done
++
++if $lt_cl_silent; then
++  exec AS_MESSAGE_FD>/dev/null
++fi
++_LTEOF
++
++cat >>"$CONFIG_LT" <<_LTEOF
++_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
++_LTEOF
++
++cat >>"$CONFIG_LT" <<\_LTEOF
++AC_MSG_NOTICE([creating $ofile])
++_LT_OUTPUT_LIBTOOL_COMMANDS
++AS_EXIT(0)
++_LTEOF
++chmod +x "$CONFIG_LT"
++
++# configure is writing to config.log, but config.lt does its own redirection,
++# appending to config.log, which fails on DOS, as config.log is still kept
++# open by configure.  Here we exec the FD to /dev/null, effectively closing
++# config.log, so it can be properly (re)opened and appended to by config.lt.
++if test "$no_create" != yes; then
++  lt_cl_success=:
++  test "$silent" = yes &&
++    lt_config_lt_args="$lt_config_lt_args --quiet"
++  exec AS_MESSAGE_LOG_FD>/dev/null
++  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
++  exec AS_MESSAGE_LOG_FD>>config.log
++  $lt_cl_success || AS_EXIT(1)
++fi
++])# LT_OUTPUT
++
++
++# _LT_CONFIG(TAG)
++# ---------------
++# If TAG is the built-in tag, create an initial libtool script with a
++# default configuration from the untagged config vars.  Otherwise add code
++# to config.status for appending the configuration named by TAG from the
++# matching tagged config vars.
++m4_defun([_LT_CONFIG],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_CONFIG_SAVE_COMMANDS([
++  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
++  m4_if(_LT_TAG, [C], [
++    # See if we are running on zsh, and set the options which allow our
++    # commands through without removal of \ escapes.
++    if test -n "${ZSH_VERSION+set}" ; then
++      setopt NO_GLOB_SUBST
++    fi
++
++    cfgfile="${ofile}T"
++    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
++    $RM "$cfgfile"
++
++    cat <<_LT_EOF >> "$cfgfile"
++#! $SHELL
++
++# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++_LT_COPYING
++_LT_LIBTOOL_TAGS
++
++# ### BEGIN LIBTOOL CONFIG
++_LT_LIBTOOL_CONFIG_VARS
++_LT_LIBTOOL_TAG_VARS
++# ### END LIBTOOL CONFIG
++
++_LT_EOF
++
++  case $host_os in
++  aix3*)
++    cat <<\_LT_EOF >> "$cfgfile"
++# AIX sometimes has problems with the GCC collect2 program.  For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++  COLLECT_NAMES=
++  export COLLECT_NAMES
++fi
++_LT_EOF
++    ;;
++  esac
++
++  _LT_PROG_LTMAIN
++
++  # We use sed instead of cat because bash on DJGPP gets confused if
++  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
++  # text mode, it properly converts lines to CR/LF.  This bash problem
++  # is reportedly fixed, but why not run on old versions too?
++  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
++    || (rm -f "$cfgfile"; exit 1)
++
++  _LT_PROG_XSI_SHELLFNS
++
++  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
++    || (rm -f "$cfgfile"; exit 1)
++
++  mv -f "$cfgfile" "$ofile" ||
++    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++  chmod +x "$ofile"
++],
++[cat <<_LT_EOF >> "$ofile"
++
++dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
++dnl in a comment (ie after a #).
++# ### BEGIN LIBTOOL TAG CONFIG: $1
++_LT_LIBTOOL_TAG_VARS(_LT_TAG)
++# ### END LIBTOOL TAG CONFIG: $1
++_LT_EOF
++])dnl /m4_if
++],
++[m4_if([$1], [], [
++    PACKAGE='$PACKAGE'
++    VERSION='$VERSION'
++    TIMESTAMP='$TIMESTAMP'
++    RM='$RM'
++    ofile='$ofile'], [])
++])dnl /_LT_CONFIG_SAVE_COMMANDS
++])# _LT_CONFIG
++
++
++# LT_SUPPORTED_TAG(TAG)
++# ---------------------
++# Trace this macro to discover what tags are supported by the libtool
++# --tag option, using:
++#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
++AC_DEFUN([LT_SUPPORTED_TAG], [])
++
++
++# C support is built-in for now
++m4_define([_LT_LANG_C_enabled], [])
++m4_define([_LT_TAGS], [])
++
++
++# LT_LANG(LANG)
++# -------------
++# Enable libtool support for the given language if not already enabled.
++AC_DEFUN([LT_LANG],
++[AC_BEFORE([$0], [LT_OUTPUT])dnl
++m4_case([$1],
++  [C],                        [_LT_LANG(C)],
++  [C++],              [_LT_LANG(CXX)],
++  [Java],             [_LT_LANG(GCJ)],
++  [Fortran 77],               [_LT_LANG(F77)],
++  [Fortran],          [_LT_LANG(FC)],
++  [Windows Resource], [_LT_LANG(RC)],
++  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
++    [_LT_LANG($1)],
++    [m4_fatal([$0: unsupported language: "$1"])])])dnl
++])# LT_LANG
++
++
++# _LT_LANG(LANGNAME)
++# ------------------
++m4_defun([_LT_LANG],
++[m4_ifdef([_LT_LANG_]$1[_enabled], [],
++  [LT_SUPPORTED_TAG([$1])dnl
++  m4_append([_LT_TAGS], [$1 ])dnl
++  m4_define([_LT_LANG_]$1[_enabled], [])dnl
++  _LT_LANG_$1_CONFIG($1)])dnl
++])# _LT_LANG
++
++
++# _LT_LANG_DEFAULT_CONFIG
++# -----------------------
++m4_defun([_LT_LANG_DEFAULT_CONFIG],
++[AC_PROVIDE_IFELSE([AC_PROG_CXX],
++  [LT_LANG(CXX)],
++  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_F77],
++  [LT_LANG(F77)],
++  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
++
++AC_PROVIDE_IFELSE([AC_PROG_FC],
++  [LT_LANG(FC)],
++  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
++
++dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
++dnl pulling things in needlessly.
++AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++  [LT_LANG(GCJ)],
++  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++    [LT_LANG(GCJ)],
++    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
++      [LT_LANG(GCJ)],
++      [m4_ifdef([AC_PROG_GCJ],
++      [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
++       m4_ifdef([A][M_PROG_GCJ],
++      [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
++       m4_ifdef([LT_PROG_GCJ],
++      [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
++
++AC_PROVIDE_IFELSE([LT_PROG_RC],
++  [LT_LANG(RC)],
++  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
++])# _LT_LANG_DEFAULT_CONFIG
++
++# Obsolete macros:
++AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
++AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
++AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
++AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
++dnl AC_DEFUN([AC_LIBTOOL_F77], [])
++dnl AC_DEFUN([AC_LIBTOOL_FC], [])
++dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
++
++
++# _LT_TAG_COMPILER
++# ----------------
++m4_defun([_LT_TAG_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
++_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
++_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
++_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_TAG_COMPILER
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++m4_defun([_LT_COMPILER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$RM conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++m4_defun([_LT_LINKER_BOILERPLATE],
++[m4_require([_LT_DECL_SED])dnl
++ac_outfile=conftest.$ac_objext
++echo "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$RM -r conftest*
++])# _LT_LINKER_BOILERPLATE
++
++# _LT_REQUIRED_DARWIN_CHECKS
++# -------------------------
++m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
++  case $host_os in
++    rhapsody* | darwin*)
++    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
++    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
++    AC_CHECK_TOOL([LIPO], [lipo], [:])
++    AC_CHECK_TOOL([OTOOL], [otool], [:])
++    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
++    _LT_DECL([], [DSYMUTIL], [1],
++      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
++    _LT_DECL([], [NMEDIT], [1],
++      [Tool to change global to local symbols on Mac OS X])
++    _LT_DECL([], [LIPO], [1],
++      [Tool to manipulate fat objects and archives on Mac OS X])
++    _LT_DECL([], [OTOOL], [1],
++      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
++    _LT_DECL([], [OTOOL64], [1],
++      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
++
++    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
++      [lt_cv_apple_cc_single_mod=no
++      if test -z "${LT_MULTI_MODULE}"; then
++      # By default we will add the -single_module flag. You can override
++      # by either setting the environment variable LT_MULTI_MODULE
++      # non-empty at configure time, or by adding -multi_module to the
++      # link flags.
++      rm -rf libconftest.dylib*
++      echo "int foo(void){return 1;}" > conftest.c
++      echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
++      $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
++        -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
++        _lt_result=$?
++      if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
++        lt_cv_apple_cc_single_mod=yes
++      else
++        cat conftest.err >&AS_MESSAGE_LOG_FD
++      fi
++      rm -rf libconftest.dylib*
++      rm -f conftest.*
++      fi])
++    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
++      [lt_cv_ld_exported_symbols_list],
++      [lt_cv_ld_exported_symbols_list=no
++      save_LDFLAGS=$LDFLAGS
++      echo "_main" > conftest.sym
++      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
++      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++      [lt_cv_ld_exported_symbols_list=yes],
++      [lt_cv_ld_exported_symbols_list=no])
++      LDFLAGS="$save_LDFLAGS"
++    ])
++    case $host_os in
++    rhapsody* | darwin1.[[012]])
++      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
++    darwin1.*)
++      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++    darwin*) # darwin 5.x on
++      # if running on 10.5 or later, the deployment target defaults
++      # to the OS version, if on x86, and 10.4, the deployment
++      # target defaults to 10.4. Don't you love it?
++      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
++      10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
++        _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++      10.[[012]]*)
++        _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
++      10.*)
++        _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
++      esac
++    ;;
++  esac
++    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
++      _lt_dar_single_mod='$single_module'
++    fi
++    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
++      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
++    else
++      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    fi
++    if test "$DSYMUTIL" != ":"; then
++      _lt_dsymutil='~$DSYMUTIL $lib || :'
++    else
++      _lt_dsymutil=
++    fi
++    ;;
++  esac
++])
++
++
++# _LT_DARWIN_LINKER_FEATURES
++# --------------------------
++# Checks for linker and compiler features on darwin
++m4_defun([_LT_DARWIN_LINKER_FEATURES],
++[
++  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
++  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++  _LT_TAGVAR(hardcode_direct, $1)=no
++  _LT_TAGVAR(hardcode_automatic, $1)=yes
++  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
++  _LT_TAGVAR(link_all_deplibs, $1)=yes
++  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
++  case $cc_basename in
++     ifort*) _lt_dar_can_shared=yes ;;
++     *) _lt_dar_can_shared=$GCC ;;
++  esac
++  if test "$_lt_dar_can_shared" = "yes"; then
++    output_verbose_link_cmd=echo
++    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
++    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
++    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
++    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
++    m4_if([$1], [CXX],
++[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
++      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
++      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
++    fi
++],[])
++  else
++  _LT_TAGVAR(ld_shlibs, $1)=no
++  fi
++])
++
++# _LT_SYS_MODULE_PATH_AIX
++# -----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++m4_defun([_LT_SYS_MODULE_PATH_AIX],
++[m4_require([_LT_DECL_SED])dnl
++AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++lt_aix_libpath_sed='
++    /Import File Strings/,/^$/ {
++      /^0/ {
++          s/^0  *\(.*\)$/\1/
++          p
++      }
++    }'
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then
++  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
++fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_SYS_MODULE_PATH_AIX
++
++
++# _LT_SHELL_INIT(ARG)
++# -------------------
++m4_define([_LT_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++           [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++       [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_SHELL_INIT
++
++
++# _LT_PROG_ECHO_BACKSLASH
++# -----------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++m4_defun([_LT_PROG_ECHO_BACKSLASH],
++[_LT_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$lt_ECHO in
++X*--fallback-echo)
++  # Remove one level of quotation (which was required for Make).
++  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++  ;;
++esac
++
++ECHO=${lt_ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++  # Discard the --no-reexec flag, and continue.
++  shift
++elif test "X[$]1" = X--fallback-echo; then
++  # Avoid inline document here, it may be left over
++  :
++elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
++  # Yippee, $ECHO works!
++  :
++else
++  # Restart under the correct shell.
++  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++fi
++
++if test "X[$]1" = X--fallback-echo; then
++  # used as fallback echo
++  shift
++  cat <<_LT_EOF
++[$]*
++_LT_EOF
++  exit 0
++fi
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test -z "$lt_ECHO"; then
++  if test "X${echo_test_string+set}" != Xset; then
++    # find a string as large as possible, as long as the shell can cope with it
++    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
++       { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
++      then
++        break
++      fi
++    done
++  fi
++
++  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
++     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
++     test "X$echo_testing_string" = "X$echo_test_string"; then
++    :
++  else
++    # The Solaris, AIX, and Digital Unix default echo programs unquote
++    # backslashes.  This makes it impossible to quote backslashes using
++    #   echo "$something" | sed 's/\\/\\\\/g'
++    #
++    # So, first we look for a working echo in the user's PATH.
++
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for dir in $PATH /usr/ucb; do
++      IFS="$lt_save_ifs"
++      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++         test "X$echo_testing_string" = "X$echo_test_string"; then
++        ECHO="$dir/echo"
++        break
++      fi
++    done
++    IFS="$lt_save_ifs"
++
++    if test "X$ECHO" = Xecho; then
++      # We didn't find a better echo, so look for alternatives.
++      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
++         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
++         test "X$echo_testing_string" = "X$echo_test_string"; then
++        # This shell has a builtin print -r that does the trick.
++        ECHO='print -r'
++      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
++         test "X$CONFIG_SHELL" != X/bin/ksh; then
++        # If we have ksh, try running configure again with it.
++        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++        export ORIGINAL_CONFIG_SHELL
++        CONFIG_SHELL=/bin/ksh
++        export CONFIG_SHELL
++        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++      else
++        # Try using printf.
++        ECHO='printf %s\n'
++        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
++         echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
++         test "X$echo_testing_string" = "X$echo_test_string"; then
++        # Cool, printf works
++        :
++        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++           test "X$echo_testing_string" = 'X\t' &&
++           echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++           test "X$echo_testing_string" = "X$echo_test_string"; then
++        CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++        export CONFIG_SHELL
++        SHELL="$CONFIG_SHELL"
++        export SHELL
++        ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
++        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++           test "X$echo_testing_string" = 'X\t' &&
++           echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++           test "X$echo_testing_string" = "X$echo_test_string"; then
++        ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
++        else
++        # maybe with a smaller string...
++        prev=:
++
++        for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++          if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
++          then
++            break
++          fi
++          prev="$cmd"
++        done
++
++        if test "$prev" != 'sed 50q "[$]0"'; then
++          echo_test_string=`eval $prev`
++          export echo_test_string
++          exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++        else
++          # Oops.  We lost completely, so just stick with echo.
++          ECHO=echo
++        fi
++        fi
++      fi
++    fi
++  fi
++fi
++
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++lt_ECHO=$ECHO
++if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
++
++AC_SUBST(lt_ECHO)
++])
++_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
++_LT_DECL([], [ECHO], [1],
++    [An echo program that does not interpret backslashes])
++])# _LT_PROG_ECHO_BACKSLASH
++
++
++# _LT_ENABLE_LOCK
++# ---------------
++m4_defun([_LT_ENABLE_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++  [AS_HELP_STRING([--disable-libtool-lock],
++    [avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.$ac_objext` in
++      *ELF-32*)
++      HPUX_IA64_MODE="32"
++      ;;
++      *ELF-64*)
++      HPUX_IA64_MODE="64"
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++*-*-irix6*)
++  # Find out which ABI we are using.
++  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    if test "$lt_cv_prog_gnu_ld" = yes; then
++      case `/usr/bin/file conftest.$ac_objext` in
++      *32-bit*)
++        LD="${LD-ld} -melf32bsmip"
++        ;;
++      *N32*)
++        LD="${LD-ld} -melf32bmipn32"
++        ;;
++      *64-bit*)
++        LD="${LD-ld} -melf64bmip"
++      ;;
++      esac
++    else
++      case `/usr/bin/file conftest.$ac_objext` in
++      *32-bit*)
++        LD="${LD-ld} -32"
++        ;;
++      *N32*)
++        LD="${LD-ld} -n32"
++        ;;
++      *64-bit*)
++        LD="${LD-ld} -64"
++        ;;
++      esac
++    fi
++  fi
++  rm -rf conftest*
++  ;;
++
++x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
++s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++      *32-bit*)
++      case $host in
++        x86_64-*kfreebsd*-gnu)
++          LD="${LD-ld} -m elf_i386_fbsd"
++          ;;
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_i386"
++          ;;
++        ppc64-*linux*|powerpc64-*linux*)
++          LD="${LD-ld} -m elf32ppclinux"
++          ;;
++        s390x-*linux*)
++          LD="${LD-ld} -m elf_s390"
++          ;;
++        sparc64-*linux*)
++          LD="${LD-ld} -m elf32_sparc"
++          ;;
++      esac
++      ;;
++      *64-bit*)
++      case $host in
++        x86_64-*kfreebsd*-gnu)
++          LD="${LD-ld} -m elf_x86_64_fbsd"
++          ;;
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        ppc*-*linux*|powerpc*-*linux*)
++          LD="${LD-ld} -m elf64ppc"
++          ;;
++        s390*-*linux*|s390*-*tpf*)
++          LD="${LD-ld} -m elf64_s390"
++          ;;
++        sparc*-*linux*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++    [AC_LANG_PUSH(C)
++     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++     AC_LANG_POP])
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++sparc*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*) LD="${LD-ld} -m elf64_sparc" ;;
++      *)
++      if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
++        LD="${LD-ld} -64"
++      fi
++      ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++esac
++
++need_locks="$enable_libtool_lock"
++])# _LT_ENABLE_LOCK
++
++
++# _LT_CMD_OLD_ARCHIVE
++# -------------------
++m4_defun([_LT_CMD_OLD_ARCHIVE],
++[AC_CHECK_TOOL(AR, ar, false)
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++_LT_DECL([], [AR], [1], [The archiver])
++_LT_DECL([], [AR_FLAGS], [1])
++
++AC_CHECK_TOOL(STRIP, strip, :)
++test -z "$STRIP" && STRIP=:
++_LT_DECL([], [STRIP], [1], [A symbol stripping program])
++
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++test -z "$RANLIB" && RANLIB=:
++_LT_DECL([], [RANLIB], [1],
++    [Commands used to install an old-style archive])
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
++_LT_DECL([], [old_postinstall_cmds], [2])
++_LT_DECL([], [old_postuninstall_cmds], [2])
++_LT_TAGDECL([], [old_archive_cmds], [2],
++    [Commands used to build an old-style archive])
++])# _LT_CMD_OLD_ARCHIVE
++
++
++# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#             [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([_LT_COMPILER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$3"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       $2=yes
++     fi
++   fi
++   $RM conftest*
++])
++
++if test x"[$]$2" = xyes; then
++    m4_if([$5], , :, [$5])
++else
++    m4_if([$6], , :, [$6])
++fi
++])# _LT_COMPILER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
++
++
++# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#                  [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------
++# Check whether the given linker option works
++AC_DEFUN([_LT_LINKER_OPTION],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $3"
++   echo "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&AS_MESSAGE_LOG_FD
++       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         $2=yes
++       fi
++     else
++       $2=yes
++     fi
++   fi
++   $RM -r conftest*
++   LDFLAGS="$save_LDFLAGS"
++])
++
++if test x"[$]$2" = xyes; then
++    m4_if([$4], , :, [$4])
++else
++    m4_if([$5], , :, [$5])
++fi
++])# _LT_LINKER_OPTION
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
++
++
++# LT_CMD_MAX_LEN
++#---------------
++AC_DEFUN([LT_CMD_MAX_LEN],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++  i=0
++  teststring="ABCD"
++
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
++
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
++
++  cygwin* | mingw* | cegcc*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536     # usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
++
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
++
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[       ]]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
++    ;;
++  *)
++    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
++    if test -n "$lt_cv_sys_max_cmd_len"; then
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    else
++      # Make teststring a little bigger before we do anything with it.
++      # a 1K string should be a reasonable start.
++      for i in 1 2 3 4 5 6 7 8 ; do
++        teststring=$teststring$teststring
++      done
++      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++      # If test is not a shell built-in, we'll probably end up computing a
++      # maximum length that is only half of the actual maximum length, but
++      # we can't tell.
++      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
++               = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
++            test $i != 17 # 1/2 MB should be enough
++      do
++        i=`expr $i + 1`
++        teststring=$teststring$teststring
++      done
++      # Only check the string length outside the loop.
++      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
++      teststring=
++      # Add a significant safety factor because C++ compilers can tack on
++      # massive amounts of additional arguments before passing them to the
++      # linker.  It appears as though 1/2 is a usable value.
++      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    fi
++    ;;
++  esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++  AC_MSG_RESULT(none)
++fi
++max_cmd_len=$lt_cv_sys_max_cmd_len
++_LT_DECL([], [max_cmd_len], [0],
++    [What is the maximum length of a command?])
++])# LT_CMD_MAX_LEN
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
++
++
++# _LT_HEADER_DLFCN
++# ----------------
++m4_defun([_LT_HEADER_DLFCN],
++[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
++])# _LT_HEADER_DLFCN
++
++
++# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ----------------------------------------------------------------
++m4_defun([_LT_TRY_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++  [$4]
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<_LT_EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL         RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL               DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL               0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW          RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW                DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW      RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW    DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW    0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++  return status;
++}]
++_LT_EOF
++  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) $1 ;;
++      x$lt_dlneed_uscore) $2 ;;
++      x$lt_dlunknown|x*) $3 ;;
++    esac
++  else :
++    # compilation failed
++    $3
++  fi
++fi
++rm -fr conftest*
++])# _LT_TRY_DLOPEN_SELF
++
++
++# LT_SYS_DLOPEN_SELF
++# ------------------
++AC_DEFUN([LT_SYS_DLOPEN_SELF],
++[m4_require([_LT_HEADER_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
++else
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32* | cegcc*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++    ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++    ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    AC_CHECK_LIB([dl], [dlopen],
++              [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ])
++    ;;
++
++  *)
++    AC_CHECK_FUNC([shl_load],
++        [lt_cv_dlopen="shl_load"],
++      [AC_CHECK_LIB([dld], [shl_load],
++          [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
++      [AC_CHECK_FUNC([dlopen],
++            [lt_cv_dlopen="dlopen"],
++        [AC_CHECK_LIB([dl], [dlopen],
++              [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++          [AC_CHECK_LIB([svld], [dlopen],
++                [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++            [AC_CHECK_LIB([dld], [dld_link],
++                  [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
++            ])
++          ])
++        ])
++      ])
++      ])
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    AC_CACHE_CHECK([whether a program can dlopen itself],
++        lt_cv_dlopen_self, [dnl
++        _LT_TRY_DLOPEN_SELF(
++          lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++          lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++    ])
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++        lt_cv_dlopen_self_static, [dnl
++        _LT_TRY_DLOPEN_SELF(
++          lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++          lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
++      ])
++    fi
++
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
++
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
++
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
++fi
++_LT_DECL([dlopen_support], [enable_dlopen], [0],
++       [Whether dlopen is supported])
++_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
++       [Whether dlopen of programs is supported])
++_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
++       [Whether dlopen of statically linked programs is supported])
++])# LT_SYS_DLOPEN_SELF
++
++# Old name:
++AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
++
++
++# _LT_COMPILER_C_O([TAGNAME])
++# ---------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler.
++# This macro does not hard code the compiler like AC_PROG_CC_C_O.
++m4_defun([_LT_COMPILER_C_O],
++[m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++   $RM -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++     fi
++   fi
++   chmod u+w . 2>&AS_MESSAGE_LOG_FD
++   $RM conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
++   $RM out/* && rmdir out
++   cd ..
++   $RM -r conftest
++   $RM conftest*
++])
++_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
++      [Does compiler simultaneously support -c and -o options?])
++])# _LT_COMPILER_C_O
++
++
++# _LT_COMPILER_FILE_LOCKS([TAGNAME])
++# ----------------------------------
++# Check to see if we can do hard links to lock some files if needed
++m4_defun([_LT_COMPILER_FILE_LOCKS],
++[m4_require([_LT_ENABLE_LOCK])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++_LT_COMPILER_C_O([$1])
++
++hard_links="nottested"
++if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  AC_MSG_CHECKING([if we can lock with hard links])
++  hard_links=yes
++  $RM conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  AC_MSG_RESULT([$hard_links])
++  if test "$hard_links" = no; then
++    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
++])# _LT_COMPILER_FILE_LOCKS
++
++
++# _LT_CHECK_OBJDIR
++# ----------------
++m4_defun([_LT_CHECK_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++_LT_DECL([], [objdir], [0],
++         [The name of the directory that contains temporary libtool files])dnl
++m4_pattern_allow([LT_OBJDIR])dnl
++AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
++  [Define to the sub-directory in which libtool stores uninstalled libraries.])
++])# _LT_CHECK_OBJDIR
++
++
++# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
++# --------------------------------------
++# Check hardcoding attributes.
++m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
++   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
++   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++  # We can hardcode non-existent directories.
++  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
++    # Linking always hardcodes the temporary library directory.
++    _LT_TAGVAR(hardcode_action, $1)=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    _LT_TAGVAR(hardcode_action, $1)=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  _LT_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
++   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++_LT_TAGDECL([], [hardcode_action], [0],
++    [How to hardcode a shared library path into an executable])
++])# _LT_LINKER_HARDCODE_LIBPATH
++
++
++# _LT_CMD_STRIPLIB
++# ----------------
++m4_defun([_LT_CMD_STRIPLIB],
++[m4_require([_LT_DECL_EGREP])
++striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++  darwin*)
++    if test -n "$STRIP" ; then
++      striplib="$STRIP -x"
++      old_striplib="$STRIP -S"
++      AC_MSG_RESULT([yes])
++    else
++      AC_MSG_RESULT([no])
++    fi
++    ;;
++  *)
++    AC_MSG_RESULT([no])
++    ;;
++  esac
++fi
++_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
++_LT_DECL([], [striplib], [1])
++])# _LT_CMD_STRIPLIB
++
++
++# _LT_SYS_DYNAMIC_LINKER([TAG])
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++m4_defun([_LT_SYS_DYNAMIC_LINKER],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_OBJDUMP])dnl
++m4_require([_LT_DECL_SED])dnl
++AC_MSG_CHECKING([dynamic linker characteristics])
++m4_if([$1],
++      [], [
++if test "$GCC" = yes; then
++  case $host_os in
++    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
++    *) lt_awk_arg="/^libraries:/" ;;
++  esac
++  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++  # Ok, now we have the path, separated by spaces, we can step through it
++  # and add multilib dir if necessary.
++  lt_tmp_lt_search_path_spec=
++  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
++  for lt_sys_path in $lt_search_path_spec; do
++    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
++      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
++    else
++      test -d "$lt_sys_path" && \
++      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
++    fi
++  done
++  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
++BEGIN {RS=" "; FS="/|\n";} {
++  lt_foo="";
++  lt_count=0;
++  for (lt_i = NF; lt_i > 0; lt_i--) {
++    if ($lt_i != "" && $lt_i != ".") {
++      if ($lt_i == "..") {
++        lt_count++;
++      } else {
++        if (lt_count == 0) {
++          lt_foo="/" $lt_i lt_foo;
++        } else {
++          lt_count--;
++        }
++      }
++    }
++  }
++  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
++  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
++}'`
++  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix[[4-9]]*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[[01]] | aix4.[[01]].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++         echo ' yes '
++         echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
++      :
++      else
++      can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  case $host_cpu in
++  powerpc)
++    # Since July 2007 AmigaOS4 officially supports .so libraries.
++    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    ;;
++  m68k)
++    library_names_spec='$libname.ixlibrary $libname.a'
++    # Create ${libname}_ixlibrary.a entries in /sys/libs.
++    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++    ;;
++  esac
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[[45]]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32* | cegcc*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname~
++      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
++        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
++      fi'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $RM \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw* | cegcc*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++m4_if([$1], [],[
++  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[[123]]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  *) # from 4.6 on, and DragonFly
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  hppa*64*)
++    shrext_cmds='.sl'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++  *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix[[3-9]]*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++      if test "$lt_cv_prog_gnu_ld" = yes; then
++              version_type=linux
++      else
++              version_type=irix
++      fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # Some binutils ld are patched to set DT_RUNPATH
++  save_LDFLAGS=$LDFLAGS
++  save_libdir=$libdir
++  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
++       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
++  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
++    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
++       [shlibpath_overrides_runpath=yes])])
++  LDFLAGS=$save_LDFLAGS
++  libdir=$save_libdir
++
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[         ]*hwcap[        ]/d;s/[:,      ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++*nto* | *qnx*)
++  version_type=qnx
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='ldqnx.so'
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*)        need_version=yes ;;
++    *)                                need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[[89]] | openbsd2.[[89]].*)
++      shlibpath_overrides_runpath=no
++      ;;
++      *)
++      shlibpath_overrides_runpath=yes
++      ;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++rdos*)
++  dynamic_linker=no
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++      ;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++tpf*)
++  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++AC_MSG_RESULT([$dynamic_linker])
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
++  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
++fi
++if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
++  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
++fi
++
++_LT_DECL([], [variables_saved_for_relink], [1],
++    [Variables whose values should be saved in libtool wrapper scripts and
++    restored at link time])
++_LT_DECL([], [need_lib_prefix], [0],
++    [Do we need the "lib" prefix for modules?])
++_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
++_LT_DECL([], [version_type], [0], [Library versioning type])
++_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
++_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
++_LT_DECL([], [shlibpath_overrides_runpath], [0],
++    [Is shlibpath searched before the hard-coded library search path?])
++_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
++_LT_DECL([], [library_names_spec], [1],
++    [[List of archive names.  First name is the real one, the rest are links.
++    The last name is the one that the linker finds with -lNAME]])
++_LT_DECL([], [soname_spec], [1],
++    [[The coded name of the library, if different from the real name]])
++_LT_DECL([], [postinstall_cmds], [2],
++    [Command to use after installation of a shared archive])
++_LT_DECL([], [postuninstall_cmds], [2],
++    [Command to use after uninstallation of a shared archive])
++_LT_DECL([], [finish_cmds], [2],
++    [Commands used to finish a libtool library installation in a directory])
++_LT_DECL([], [finish_eval], [1],
++    [[As "finish_cmds", except a single script fragment to be evaled but
++    not shown]])
++_LT_DECL([], [hardcode_into_libs], [0],
++    [Whether we should hardcode library paths into libraries])
++_LT_DECL([], [sys_lib_search_path_spec], [2],
++    [Compile-time system search path for libraries])
++_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
++    [Run-time system search path for libraries])
++])# _LT_SYS_DYNAMIC_LINKER
++
++
++# _LT_PATH_TOOL_PREFIX(TOOL)
++# --------------------------
++# find a file program which can recognize shared library
++AC_DEFUN([_LT_PATH_TOOL_PREFIX],
++[m4_require([_LT_DECL_EGREP])dnl
++AC_MSG_CHECKING([for $1])
++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
++[case $MAGIC_CMD in
++[[\\/*] |  ?:[\\/]*])
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++dnl $ac_dummy forces splitting on constant user-supplied paths.
++dnl POSIX.2 word splitting is done only on the output of word expansions,
++dnl not every word.  This closes a longstanding sh security hole.
++  ac_dummy="m4_if([$2], , $PATH, [$2])"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$1; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
++      if test -n "$file_magic_test_file"; then
++      case $deplibs_check_method in
++      "file_magic "*)
++        file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++        MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++        if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++          $EGREP "$file_magic_regex" > /dev/null; then
++          :
++        else
++          cat <<_LT_EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
++
++_LT_EOF
++        fi ;;
++      esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac])
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  AC_MSG_RESULT($MAGIC_CMD)
++else
++  AC_MSG_RESULT(no)
++fi
++_LT_DECL([], [MAGIC_CMD], [0],
++       [Used to examine libraries when file_magic_cmd begins with "file"])dnl
++])# _LT_PATH_TOOL_PREFIX
++
++# Old name:
++AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
++
++
++# _LT_PATH_MAGIC
++# --------------
++# find a file program which can recognize a shared library
++m4_defun([_LT_PATH_MAGIC],
++[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++  if test -n "$ac_tool_prefix"; then
++    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
++  else
++    MAGIC_CMD=:
++  fi
++fi
++])# _LT_PATH_MAGIC
++
++
++# LT_PATH_LD
++# ----------
++# find the pathname to the GNU or non-GNU linker
++AC_DEFUN([LT_PATH_LD],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++
++AC_ARG_WITH([gnu-ld],
++    [AS_HELP_STRING([--with-gnu-ld],
++      [assume the C compiler uses GNU ld @<:@default=no@:>@])],
++    [test "$withval" = no || with_gnu_ld=yes],
++    [with_gnu_ld=no])dnl
++
++ac_prog=ld
++if test "$GCC" = yes; then
++  # Check if gcc -print-prog-name=ld gives a path.
++  AC_MSG_CHECKING([for ld used by $CC])
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
++    # Accept absolute paths.
++    [[\\/]]* | ?:[[\\/]]*)
++      re_direlt='/[[^/]][[^/]]*/\.\./'
++      # Canonicalize the pathname of ld
++      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
++      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
++      ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
++      done
++      test -z "$LD" && LD="$ac_prog"
++      ;;
++  "")
++    # If it fails, then pretend we aren't using GCC.
++    ac_prog=ld
++    ;;
++  *)
++    # If it is relative, then search for the first ld in PATH.
++    with_gnu_ld=unknown
++    ;;
++  esac
++elif test "$with_gnu_ld" = yes; then
++  AC_MSG_CHECKING([for GNU ld])
++else
++  AC_MSG_CHECKING([for non-GNU ld])
++fi
++AC_CACHE_VAL(lt_cv_path_LD,
++[if test -z "$LD"; then
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++      lt_cv_path_LD="$ac_dir/$ac_prog"
++      # Check to see if the program is GNU ld.  I'd rather use --version,
++      # but apparently some variants of GNU ld only accept -v.
++      # Break only if it was the GNU/non-GNU ld that we prefer.
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
++      test "$with_gnu_ld" != no && break
++      ;;
++      *)
++      test "$with_gnu_ld" != yes && break
++      ;;
++      esac
++    fi
++  done
++  IFS="$lt_save_ifs"
++else
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi])
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++  AC_MSG_RESULT($LD)
++else
++  AC_MSG_RESULT(no)
++fi
++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
++_LT_PATH_LD_GNU
++AC_SUBST([LD])
++
++_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
++])# LT_PATH_LD
++
++# Old names:
++AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
++AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_LD], [])
++dnl AC_DEFUN([AC_PROG_LD], [])
++
++
++# _LT_PATH_LD_GNU
++#- --------------
++m4_defun([_LT_PATH_LD_GNU],
++[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
++  ;;
++esac])
++with_gnu_ld=$lt_cv_prog_gnu_ld
++])# _LT_PATH_LD_GNU
++
++
++# _LT_CMD_RELOAD
++# --------------
++# find reload flag for linker
++#   -- PORTME Some linkers may need a different reload flag.
++m4_defun([_LT_CMD_RELOAD],
++[AC_CACHE_CHECK([for $LD option to reload object files],
++  lt_cv_ld_reload_flag,
++  [lt_cv_ld_reload_flag='-r'])
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++  darwin*)
++    if test "$GCC" = yes; then
++      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++    else
++      reload_cmds='$LD$reload_flag -o $output$reload_objs'
++    fi
++    ;;
++esac
++_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
++_LT_DECL([], [reload_cmds], [2])dnl
++])# _LT_CMD_RELOAD
++
++
++# _LT_CHECK_MAGIC_METHOD
++# ----------------------
++# how to check for library dependencies
++#  -- PORTME fill in with the dynamic library characteristics
++m4_defun([_LT_CHECK_MAGIC_METHOD],
++[m4_require([_LT_DECL_EGREP])
++m4_require([_LT_DECL_OBJDUMP])
++AC_CACHE_CHECK([how to recognize dependent libraries],
++lt_cv_deplibs_check_method,
++[lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix[[4-9]]*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++beos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++bsdi[[45]]*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
++  lt_cv_file_magic_cmd='/usr/bin/file -L'
++  lt_cv_file_magic_test_file=/shlib/libc.so
++  ;;
++
++cygwin*)
++  # func_win32_libid is a shell function defined in ltmain.sh
++  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++  lt_cv_file_magic_cmd='func_win32_libid'
++  ;;
++
++mingw* | pw32*)
++  # Base MSYS/MinGW do not provide the 'file' command needed by
++  # func_win32_libid shell function, so use a weaker test based on 'objdump',
++  # unless we find 'file', for example because we are cross-compiling.
++  if ( file / ) >/dev/null 2>&1; then
++    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++    lt_cv_file_magic_cmd='func_win32_libid'
++  else
++    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++    lt_cv_file_magic_cmd='$OBJDUMP -f'
++  fi
++  ;;
++
++cegcc)
++  # use the weaker test based on 'objdump'. See mingw*.
++  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
++  lt_cv_file_magic_cmd='$OBJDUMP -f'
++  ;;
++
++darwin* | rhapsody*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++freebsd* | dragonfly*)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    case $host_cpu in
++    i*86 )
++      # Not sure whether the presence of OpenBSD here was a mistake.
++      # Let's accept both of them until this is cleared up.
++      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
++      lt_cv_file_magic_cmd=/usr/bin/file
++      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++      ;;
++    esac
++  else
++    lt_cv_deplibs_check_method=pass_all
++  fi
++  ;;
++
++gnu*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++hpux10.20* | hpux11*)
++  lt_cv_file_magic_cmd=/usr/bin/file
++  case $host_cpu in
++  ia64*)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
++    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++    ;;
++  hppa*64*)
++    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++    ;;
++  *)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++    lt_cv_file_magic_test_file=/usr/lib/libc.sl
++    ;;
++  esac
++  ;;
++
++interix[[3-9]]*)
++  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $LD in
++  *-32|*"-32 ") libmagic=32-bit;;
++  *-n32|*"-n32 ") libmagic=N32;;
++  *-64|*"-64 ") libmagic=64-bit;;
++  *) libmagic=never-match;;
++  esac
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++# This must be Linux ELF.
++linux* | k*bsd*-gnu | kopensolaris*-gnu)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++netbsd* | netbsdelf*-gnu)
++  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
++  fi
++  ;;
++
++newos6*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
++  lt_cv_file_magic_cmd=/usr/bin/file
++  lt_cv_file_magic_test_file=/usr/lib/libnls.so
++  ;;
++
++*nto* | *qnx*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++openbsd*)
++  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  fi
++  ;;
++
++osf3* | osf4* | osf5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++rdos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++solaris*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv4 | sysv4.3*)
++  case $host_vendor in
++  motorola)
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
++    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++    ;;
++  ncr)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  sequent)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++    ;;
++  sni)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
++    lt_cv_file_magic_test_file=/lib/libc.so
++    ;;
++  siemens)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  pc)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  esac
++  ;;
++
++tpf*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++esac
++])
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++
++_LT_DECL([], [deplibs_check_method], [1],
++    [Method to check whether dependent libraries are shared objects])
++_LT_DECL([], [file_magic_cmd], [1],
++    [Command to use when deplibs_check_method == "file_magic"])
++])# _LT_CHECK_MAGIC_METHOD
++
++
++# LT_PATH_NM
++# ----------
++# find the pathname to a BSD- or MS-compatible name lister
++AC_DEFUN([LT_PATH_NM],
++[AC_REQUIRE([AC_PROG_CC])dnl
++AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
++[if test -n "$NM"; then
++  # Let the user override the test.
++  lt_cv_path_NM="$NM"
++else
++  lt_nm_to_check="${ac_tool_prefix}nm"
++  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++    lt_nm_to_check="$lt_nm_to_check nm"
++  fi
++  for lt_tmp_nm in $lt_nm_to_check; do
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++      IFS="$lt_save_ifs"
++      test -z "$ac_dir" && ac_dir=.
++      tmp_nm="$ac_dir/$lt_tmp_nm"
++      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++      # Check to see if the nm accepts a BSD-compat flag.
++      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
++      #   nm: unknown option "B" ignored
++      # Tru64's nm complains that /dev/null is an invalid object file
++      case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++      */dev/null* | *'Invalid file or object type'*)
++        lt_cv_path_NM="$tmp_nm -B"
++        break
++        ;;
++      *)
++        case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++        */dev/null*)
++          lt_cv_path_NM="$tmp_nm -p"
++          break
++          ;;
++        *)
++          lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++          continue # so that we can try to find one that supports BSD flags
++          ;;
++        esac
++        ;;
++      esac
++      fi
++    done
++    IFS="$lt_save_ifs"
++  done
++  : ${lt_cv_path_NM=no}
++fi])
++if test "$lt_cv_path_NM" != "no"; then
++  NM="$lt_cv_path_NM"
++else
++  # Didn't find any BSD compatible name lister, look for dumpbin.
++  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
++  AC_SUBST([DUMPBIN])
++  if test "$DUMPBIN" != ":"; then
++    NM="$DUMPBIN"
++  fi
++fi
++test -z "$NM" && NM=nm
++AC_SUBST([NM])
++_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
++
++AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
++  [lt_cv_nm_interface="BSD nm"
++  echo "int some_variable = 0;" > conftest.$ac_ext
++  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
++  (eval "$ac_compile" 2>conftest.err)
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
++  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
++  cat conftest.err >&AS_MESSAGE_LOG_FD
++  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
++  cat conftest.out >&AS_MESSAGE_LOG_FD
++  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
++    lt_cv_nm_interface="MS dumpbin"
++  fi
++  rm -f conftest*])
++])# LT_PATH_NM
++
++# Old names:
++AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
++AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_PROG_NM], [])
++dnl AC_DEFUN([AC_PROG_NM], [])
++
++
++# LT_LIB_M
++# --------
++# check for math library
++AC_DEFUN([LT_LIB_M],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
++  # These system don't have libm, or don't need it
++  ;;
++*-ncr-sysv4.3*)
++  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++  ;;
++*)
++  AC_CHECK_LIB(m, cos, LIBM="-lm")
++  ;;
++esac
++AC_SUBST([LIBM])
++])# LT_LIB_M
++
++# Old name:
++AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_CHECK_LIBM], [])
++
++
++# _LT_COMPILER_NO_RTTI([TAGNAME])
++# -------------------------------
++m4_defun([_LT_COMPILER_NO_RTTI],
++[m4_require([_LT_TAG_COMPILER])dnl
++
++_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++
++if test "$GCC" = yes; then
++  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++
++  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
++    lt_cv_prog_compiler_rtti_exceptions,
++    [-fno-rtti -fno-exceptions], [],
++    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
++fi
++_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
++      [Compiler flag to turn off builtin functions])
++])# _LT_COMPILER_NO_RTTI
++
++
++# _LT_CMD_GLOBAL_SYMBOLS
++# ----------------------
++m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++AC_REQUIRE([LT_PATH_LD])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++AC_MSG_CHECKING([command to parse $NM output from $compiler object])
++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
++[
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[[BCDEGRST]]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++  symcode='[[BCDT]]'
++  ;;
++cygwin* | mingw* | pw32* | cegcc*)
++  symcode='[[ABCDGISTW]]'
++  ;;
++hpux*)
++  if test "$host_cpu" = ia64; then
++    symcode='[[ABCDEGRST]]'
++  fi
++  ;;
++irix* | nonstopux*)
++  symcode='[[BCDEGRST]]'
++  ;;
++osf*)
++  symcode='[[BCDEGQRST]]'
++  ;;
++solaris*)
++  symcode='[[BDRT]]'
++  ;;
++sco3.2v5*)
++  symcode='[[DT]]'
++  ;;
++sysv4.2uw2*)
++  symcode='[[DT]]'
++  ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++  symcode='[[ABDT]]'
++  ;;
++sysv4)
++  symcode='[[DFNSTU]]'
++  ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++  symcode='[[ABCDGIRSTW]]' ;;
++esac
++
++# Transform an extracted symbol line into a proper C declaration.
++# Some systems (esp. on ia64) link data and code symbols differently,
++# so use this general approach.
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
++lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++  ;;
++esac
++
++# Try without a prefix underscore, then with it.
++for ac_symprfx in "" "_"; do
++
++  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++  symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++  # Write the raw and C identifiers.
++  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
++    # Fake it for dumpbin and say T for any non-static function
++    # and D for any global variable.
++    # Also find C++ and __fastcall symbols from MSVC++,
++    # which start with @ or ?.
++    lt_cv_sys_global_symbol_pipe="$AWK ['"\
++"     {last_section=section; section=\$ 3};"\
++"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
++"     \$ 0!~/External *\|/{next};"\
++"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
++"     {if(hide[section]) next};"\
++"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
++"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
++"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
++"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
++"     ' prfx=^$ac_symprfx]"
++  else
++    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[   ]]\($symcode$symcode*\)[[       ]][[    ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++  fi
++
++  # Check to see that the pipe works correctly.
++  pipe_works=no
++
++  rm -f conftest*
++  cat > conftest.$ac_ext <<_LT_EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(void);
++void nm_test_func(void){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++_LT_EOF
++
++  if AC_TRY_EVAL(ac_compile); then
++    # Now try to grab the symbols.
++    nlist=conftest.nm
++    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++      # Try sorting and uniquifying the output.
++      if sort "$nlist" | uniq > "$nlist"T; then
++      mv -f "$nlist"T "$nlist"
++      else
++      rm -f "$nlist"T
++      fi
++
++      # Make sure that we snagged all the symbols we need.
++      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
++      if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
++        cat <<_LT_EOF > conftest.$ac_ext
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++_LT_EOF
++        # Now generate the symbol file.
++        eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
++
++        cat <<_LT_EOF >> conftest.$ac_ext
++
++/* The mapping between symbol names and symbols.  */
++const struct {
++  const char *name;
++  void       *address;
++}
++lt__PROGRAM__LTX_preloaded_symbols[[]] =
++{
++  { "@PROGRAM@", (void *) 0 },
++_LT_EOF
++        $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
++        cat <<\_LT_EOF >> conftest.$ac_ext
++  {0, (void *) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++  return lt__PROGRAM__LTX_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++_LT_EOF
++        # Now try linking the two files.
++        mv conftest.$ac_objext conftstm.$ac_objext
++        lt_save_LIBS="$LIBS"
++        lt_save_CFLAGS="$CFLAGS"
++        LIBS="conftstm.$ac_objext"
++        CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
++        if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
++          pipe_works=yes
++        fi
++        LIBS="$lt_save_LIBS"
++        CFLAGS="$lt_save_CFLAGS"
++      else
++        echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
++      fi
++      else
++      echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
++      fi
++    else
++      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
++    fi
++  else
++    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
++    cat conftest.$ac_ext >&5
++  fi
++  rm -rf conftest* conftst*
++
++  # Do not use the global_symbol_pipe unless it works.
++  if test "$pipe_works" = yes; then
++    break
++  else
++    lt_cv_sys_global_symbol_pipe=
++  fi
++done
++])
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++  lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++  AC_MSG_RESULT(failed)
++else
++  AC_MSG_RESULT(ok)
++fi
++
++_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
++    [Take the output of nm and produce a listing of raw symbols and C names])
++_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
++    [Transform the output of nm in a proper C declaration])
++_LT_DECL([global_symbol_to_c_name_address],
++    [lt_cv_sys_global_symbol_to_c_name_address], [1],
++    [Transform the output of nm in a C name address pair])
++_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
++    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
++    [Transform the output of nm in a C name address pair when lib prefix is needed])
++]) # _LT_CMD_GLOBAL_SYMBOLS
++
++
++# _LT_COMPILER_PIC([TAGNAME])
++# ---------------------------
++m4_defun([_LT_COMPILER_PIC],
++[m4_require([_LT_TAG_COMPILER])dnl
++_LT_TAGVAR(lt_prog_compiler_wl, $1)=
++_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++_LT_TAGVAR(lt_prog_compiler_static, $1)=
++
++AC_MSG_CHECKING([for $compiler option to produce PIC])
++m4_if([$1], [CXX], [
++  # C++ specific cases for pic, static, wl, etc.
++  if test "$GXX" = yes; then
++    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++    aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++      # AIX 5 now supports IA64 processor
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++        ;;
++      m68k)
++            # FIXME: we need at least 68020 code to build shared libraries, but
++            # adding the `-m68020' flag to GCC prevents building anything better,
++            # like `-m68040'.
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++        ;;
++      esac
++      ;;
++
++    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++    mingw* | cygwin* | os2* | pw32* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      # Although the cygwin gcc ignores -fPIC, still need this for old-style
++      # (--disable-auto-import) libraries
++      m4_if([$1], [GCJ], [],
++      [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++    *djgpp*)
++      # DJGPP does not support shared libraries at all
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++      ;;
++    interix[[3-9]]*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++    sysv4*MP*)
++      if test -d /usr/nec; then
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++    hpux*)
++      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
++      # sets the default TLS model and affects inlining.
++      case $host_cpu in
++      hppa*64*)
++      ;;
++      *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++      esac
++      ;;
++    *qnx* | *nto*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++    *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++  else
++    case $host_os in
++      aix[[4-9]]*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++        # AIX 5 now supports IA64 processor
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      else
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++      chorus*)
++      case $cc_basename in
++      cxch68*)
++        # Green Hills C++ Compiler
++        # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
++        ;;
++      esac
++      ;;
++      dgux*)
++      case $cc_basename in
++        ec++*)
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++          ;;
++        ghcx*)
++          # Green Hills C++ Compiler
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      freebsd* | dragonfly*)
++      # FreeBSD uses GNU C++
++      ;;
++      hpux9* | hpux10* | hpux11*)
++      case $cc_basename in
++        CC*)
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++          if test "$host_cpu" != ia64; then
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++          fi
++          ;;
++        aCC*)
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++          case $host_cpu in
++          hppa*64*|ia64*)
++            # +Z the default
++            ;;
++          *)
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++            ;;
++          esac
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      interix*)
++      # This is c89, which is MS Visual C++ (no shared libs)
++      # Anyone wants to do a port?
++      ;;
++      irix5* | irix6* | nonstopux*)
++      case $cc_basename in
++        CC*)
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++          # CC pic flag -KPIC is the default.
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      linux* | k*bsd*-gnu | kopensolaris*-gnu)
++      case $cc_basename in
++        KCC*)
++          # KAI C++ Compiler
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++          ;;
++        ecpc* )
++          # old Intel C++ for x86_64 which still supported -KPIC.
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++          ;;
++        icpc* )
++          # Intel C++, used to be incompatible with GCC.
++          # ICC 10 doesn't accept -KPIC any more.
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++          ;;
++        pgCC* | pgcpp*)
++          # Portland Group C++ compiler
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++          ;;
++        cxx*)
++          # Compaq C++
++          # Make sure the PIC flag is empty.  It appears that all Alpha
++          # Linux and Compaq Tru64 Unix objects are PIC.
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++          ;;
++        xlc* | xlC*)
++          # IBM XL 8.0 on PPC
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++          ;;
++        *)
++          case `$CC -V 2>&1 | sed 5q` in
++          *Sun\ C*)
++            # Sun C++ 5.9
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++            _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++            _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++            ;;
++          esac
++          ;;
++      esac
++      ;;
++      lynxos*)
++      ;;
++      m88k*)
++      ;;
++      mvs*)
++      case $cc_basename in
++        cxx*)
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      netbsd* | netbsdelf*-gnu)
++      ;;
++      *qnx* | *nto*)
++        # QNX uses GNU C++, but need to define -shared option too, otherwise
++        # it will coredump.
++        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++        ;;
++      osf3* | osf4* | osf5*)
++      case $cc_basename in
++        KCC*)
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++          ;;
++        RCC*)
++          # Rational C++ 2.4.1
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++          ;;
++        cxx*)
++          # Digital/Compaq C++
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          # Make sure the PIC flag is empty.  It appears that all Alpha
++          # Linux and Compaq Tru64 Unix objects are PIC.
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      psos*)
++      ;;
++      solaris*)
++      case $cc_basename in
++        CC*)
++          # Sun C++ 4.2, 5.x and Centerline C++
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++          ;;
++        gcx*)
++          # Green Hills C++ Compiler
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      sunos4*)
++      case $cc_basename in
++        CC*)
++          # Sun C++ 4.x
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++          ;;
++        lcc*)
++          # Lucid
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      case $cc_basename in
++        CC*)
++          _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++          _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++          ;;
++      esac
++      ;;
++      tandem*)
++      case $cc_basename in
++        NCC*)
++          # NonStop-UX NCC 3.20
++          _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++          ;;
++        *)
++          ;;
++      esac
++      ;;
++      vxworks*)
++      ;;
++      *)
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++    esac
++  fi
++],
++[
++  if test "$GCC" = yes; then
++    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++      # AIX 5 now supports IA64 processor
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++        ;;
++      m68k)
++            # FIXME: we need at least 68020 code to build shared libraries, but
++            # adding the `-m68020' flag to GCC prevents building anything better,
++            # like `-m68040'.
++            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++        ;;
++      esac
++      ;;
++
++    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      # Although the cygwin gcc ignores -fPIC, still need this for old-style
++      # (--disable-auto-import) libraries
++      m4_if([$1], [GCJ], [],
++      [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++
++    hpux*)
++      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
++      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
++      # sets the default TLS model and affects inlining.
++      case $host_cpu in
++      hppa*64*)
++      # +Z the default
++      ;;
++      *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++      esac
++      ;;
++
++    interix[[3-9]]*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      enable_shared=no
++      ;;
++
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++
++    *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      if test "$host_cpu" = ia64; then
++      # AIX 5 now supports IA64 processor
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      else
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++
++    mingw* | cygwin* | pw32* | os2* | cegcc*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      m4_if([$1], [GCJ], [],
++      [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++      # +Z the default
++      ;;
++      *)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++      ;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC (with -KPIC) is the default.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    linux* | k*bsd*-gnu | kopensolaris*-gnu)
++      case $cc_basename in
++      # old Intel for x86_64 which still supported -KPIC.
++      ecc*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++        ;;
++      # icc used to be incompatible with GCC.
++      # ICC 10 doesn't accept -KPIC any more.
++      icc* | ifort*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
++        ;;
++      # Lahey Fortran 8.1.
++      lf95*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
++      ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++      # which looks to be a dead project)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++        ;;
++      ccc*)
++        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++        # All Alpha code is PIC.
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++        ;;
++      xl*)
++      # IBM XL C 8.0/Fortran 10.1 on PPC
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
++      ;;
++      *)
++      case `$CC -V 2>&1 | sed 5q` in
++      *Sun\ C*)
++        # Sun C 5.9
++        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++        ;;
++      *Sun\ F*)
++        # Sun Fortran 8.3 passes all unrecognized flags to the linker
++        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++        _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
++        ;;
++      esac
++      ;;
++      esac
++      ;;
++
++    newsos6)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    *nto* | *qnx*)
++      # QNX uses GNU C++, but need to define -shared option too, otherwise
++      # it will coredump.
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
++      ;;
++
++    osf3* | osf4* | osf5*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # All OSF/1 code is PIC.
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    rdos*)
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    solaris*)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++      *)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    unicos*)
++      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++
++    uts4*)
++      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    *)
++      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++    esac
++  fi
++])
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
++    ;;
++  *)
++    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
++    ;;
++esac
++AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
++_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
++      [How to pass a linker flag through the compiler])
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
++  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
++    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
++    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
++    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
++     "" | " "*) ;;
++     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
++     esac],
++    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
++     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
++fi
++_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
++      [Additional compiler flags for building library objects])
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
++_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
++  $lt_tmp_static_flag,
++  [],
++  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
++_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
++      [Compiler flag to prevent dynamic linking])
++])# _LT_COMPILER_PIC
++
++
++# _LT_LINKER_SHLIBS([TAGNAME])
++# ----------------------------
++# See if the linker supports building shared libraries.
++m4_defun([_LT_LINKER_SHLIBS],
++[AC_REQUIRE([LT_PATH_LD])dnl
++AC_REQUIRE([LT_PATH_NM])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++m4_require([_LT_DECL_SED])dnl
++m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
++m4_require([_LT_TAG_COMPILER])dnl
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++m4_if([$1], [CXX], [
++  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  case $host_os in
++  aix[[4-9]]*)
++    # If we're using GNU nm, then we don't want the "-C" option.
++    # -C means demangle to AIX nm, but means don't demangle with GNU nm
++    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++    else
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++    fi
++    ;;
++  pw32*)
++    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
++  ;;
++  cygwin* | mingw* | cegcc*)
++    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  linux* | k*bsd*-gnu)
++    _LT_TAGVAR(link_all_deplibs, $1)=no
++  ;;
++  *)
++    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  esac
++  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++], [
++  runpath_var=
++  _LT_TAGVAR(allow_undefined_flag, $1)=
++  _LT_TAGVAR(always_export_symbols, $1)=no
++  _LT_TAGVAR(archive_cmds, $1)=
++  _LT_TAGVAR(archive_expsym_cmds, $1)=
++  _LT_TAGVAR(compiler_needs_object, $1)=no
++  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  _LT_TAGVAR(hardcode_automatic, $1)=no
++  _LT_TAGVAR(hardcode_direct, $1)=no
++  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
++  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++  _LT_TAGVAR(hardcode_libdir_separator, $1)=
++  _LT_TAGVAR(hardcode_minus_L, $1)=no
++  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++  _LT_TAGVAR(inherit_rpath, $1)=no
++  _LT_TAGVAR(link_all_deplibs, $1)=unknown
++  _LT_TAGVAR(module_cmds, $1)=
++  _LT_TAGVAR(module_expsym_cmds, $1)=
++  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
++  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
++  _LT_TAGVAR(thread_safe_flag_spec, $1)=
++  _LT_TAGVAR(whole_archive_flag_spec, $1)=
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  _LT_TAGVAR(include_expsyms, $1)=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  # Exclude shared library initialization/finalization symbols.
++dnl Note also adjust exclude_expsyms for C++ above.
++  extract_expsyms_cmds=
++
++  case $host_os in
++  cygwin* | mingw* | pw32* | cegcc*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  linux* | k*bsd*-gnu)
++    _LT_TAGVAR(link_all_deplibs, $1)=no
++    ;;
++  esac
++
++  _LT_TAGVAR(ld_shlibs, $1)=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
++      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    else
++      _LT_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>&1` in
++      *GNU\ gold*) supports_anon_versioning=yes ;;
++      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix[[3-9]]*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      cat <<_LT_EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++_LT_EOF
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)=''
++        ;;
++      m68k)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        ;;
++      esac
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++      # support --undefined.  This deserves some investigation.  FIXME
++      _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32* | cegcc*)
++      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++      # as there is no search path for DLLs.
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(always_export_symbols, $1)=no
++      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
++
++      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      # If the export-symbols file already is a .def file (1st line
++      # is EXPORTS), use it as is; otherwise, prepend...
++      _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++        cp $export_symbols $output_objdir/$soname.def;
++      else
++        echo EXPORTS > $output_objdir/$soname.def;
++        cat $export_symbols >> $output_objdir/$soname.def;
++      fi~
++      $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    interix[[3-9]]*)
++      _LT_TAGVAR(hardcode_direct, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
++      tmp_diet=no
++      if test "$host_os" = linux-dietlibc; then
++      case $cc_basename in
++        diet\ *) tmp_diet=yes;;       # linux-dietlibc with static linking (!diet-dyn)
++      esac
++      fi
++      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
++       && test "$tmp_diet" = no
++      then
++      tmp_addflag=
++      tmp_sharedflag='-shared'
++      case $cc_basename,$host_cpu in
++        pgcc*)                                # Portland Group C compiler
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        tmp_addflag=' $pic_flag'
++        ;;
++      pgf77* | pgf90* | pgf95*)       # Portland Group f77 and f90 compilers
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        tmp_addflag=' $pic_flag -Mnomain' ;;
++      ecc*,ia64* | icc*,ia64*)        # Intel C compiler on ia64
++        tmp_addflag=' -i_dynamic' ;;
++      efc*,ia64* | ifort*,ia64*)      # Intel Fortran compiler on ia64
++        tmp_addflag=' -i_dynamic -nofor_main' ;;
++      ifc* | ifort*)                  # Intel Fortran compiler
++        tmp_addflag=' -nofor_main' ;;
++      lf95*)                          # Lahey Fortran 8.1
++        _LT_TAGVAR(whole_archive_flag_spec, $1)=
++        tmp_sharedflag='--shared' ;;
++      xl[[cC]]*)                      # IBM XL C 8.0 on PPC (deal with xlf below)
++        tmp_sharedflag='-qmkshrobj'
++        tmp_addflag= ;;
++      esac
++      case `$CC -V 2>&1 | sed 5q` in
++      *Sun\ C*)                       # Sun C 5.9
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++        _LT_TAGVAR(compiler_needs_object, $1)=yes
++        tmp_sharedflag='-G' ;;
++      *Sun\ F*)                       # Sun Fortran 8.3
++        tmp_sharedflag='-G' ;;
++      esac
++      _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++        if test "x$supports_anon_versioning" = xyes; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++          cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++          echo "local: *; };" >> $output_objdir/$libname.ver~
++          $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++        fi
++
++      case $cc_basename in
++      xlf*)
++        # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++        _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
++        _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
++        if test "x$supports_anon_versioning" = xyes; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++            echo "local: *; };" >> $output_objdir/$libname.ver~
++            $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
++        fi
++        ;;
++      esac
++      else
++        _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++      wlarc=
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      cat <<_LT_EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++      ;;
++      *)
++        # For security reasons, it is highly recommended that you always
++        # use absolute paths for naming shared libraries, and exclude the
++        # DT_RUNPATH tag from executables and libraries.  But doing so
++        # requires that you compile everything twice, which is a pain.
++        if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++        else
++          _LT_TAGVAR(ld_shlibs, $1)=no
++        fi
++      ;;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++    esac
++
++    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
++      runpath_var=
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
++      _LT_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(always_export_symbols, $1)=yes
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++      # Neither direct hardcoding nor static linking is supported with a
++      # broken collect2.
++      _LT_TAGVAR(hardcode_direct, $1)=unsupported
++      fi
++      ;;
++
++    aix[[4-9]]*)
++      if test "$host_cpu" = ia64; then
++      # On IA64, the linker does run time linking by default, so we don't
++      # have to do anything special.
++      aix_use_runtimelinking=no
++      exp_sym_flag='-Bexport'
++      no_entry_flag=""
++      else
++      # If we're using GNU nm, then we don't want the "-C" option.
++      # -C means demangle to AIX nm, but means don't demangle with GNU nm
++      if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
++        _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++      else
++        _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
++      fi
++      aix_use_runtimelinking=no
++
++      # Test if we are trying to use run time linking or normal
++      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++      # need to do runtime linking.
++      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++        for ld_flag in $LDFLAGS; do
++        if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++          aix_use_runtimelinking=yes
++          break
++        fi
++        done
++        ;;
++      esac
++
++      exp_sym_flag='-bexport'
++      no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      _LT_TAGVAR(archive_cmds, $1)=''
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++      if test "$GCC" = yes; then
++      case $host_os in aix4.[[012]]|aix4.[[012]].*)
++      # We only want to do this on AIX 4.2 and lower, the check
++      # below for broken collect2 doesn't work under 4.3+
++        collect2name=`${CC} -print-prog-name=collect2`
++        if test -f "$collect2name" &&
++         strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++        then
++        # We have reworked collect2
++        :
++        else
++        # We have old collect2
++        _LT_TAGVAR(hardcode_direct, $1)=unsupported
++        # It fails to find uninstalled libraries when the uninstalled
++        # path is not listed in the libpath.  Setting hardcode_minus_L
++        # to unsupported forces relinking
++        _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=
++        fi
++        ;;
++      esac
++      shared_flag='-shared'
++      if test "$aix_use_runtimelinking" = yes; then
++        shared_flag="$shared_flag "'${wl}-G'
++      fi
++      _LT_TAGVAR(link_all_deplibs, $1)=no
++      else
++      # not using gcc
++      if test "$host_cpu" = ia64; then
++      # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++      # chokes on -Wl,-G. The following line is correct:
++        shared_flag='-G'
++      else
++        if test "$aix_use_runtimelinking" = yes; then
++          shared_flag='${wl}-G'
++        else
++          shared_flag='${wl}-bM:SRE'
++        fi
++      fi
++      fi
++
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      _LT_TAGVAR(always_export_symbols, $1)=yes
++      if test "$aix_use_runtimelinking" = yes; then
++      # Warning - without using the other runtime loading flags (-brtl),
++      # -berok will link without error, but may produce a broken library.
++      _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++        # Determine the default libpath from the value encoded in an
++        # empty executable.
++        _LT_SYS_MODULE_PATH_AIX
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++      else
++      if test "$host_cpu" = ia64; then
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++        _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++        _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++      else
++       # Determine the default libpath from the value encoded in an
++       # empty executable.
++       _LT_SYS_MODULE_PATH_AIX
++       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++        # Warning - without using the other run time loading flags,
++        # -berok will link without error, but may produce a broken library.
++        _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++        # Exported symbols can be pulled into shared objects from archives
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++        _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++        # This is similar to how AIX traditionally builds its shared libraries.
++        _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++      fi
++      fi
++      ;;
++
++    amigaos*)
++      case $host_cpu in
++      powerpc)
++            # see comment about AmigaOS4 .so support
++            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)=''
++        ;;
++      m68k)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        ;;
++      esac
++      ;;
++
++    bsdi[[45]]*)
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32* | cegcc*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
++      # FIXME: Should let the user specify the lib program.
++      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
++      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
++      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      ;;
++
++    darwin* | rhapsody*)
++      _LT_DARWIN_LINKER_FEATURES($1)
++      ;;
++
++    dgux*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    freebsd1*)
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++      case $host_cpu in
++      hppa*64*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      ia64*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      *)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      esac
++      else
++      case $host_cpu in
++      hppa*64*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      ia64*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      *)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      esac
++      fi
++      if test "$with_gnu_ld" = no; then
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++      case $host_cpu in
++      hppa*64*|ia64*)
++        _LT_TAGVAR(hardcode_direct, $1)=no
++        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++        ;;
++      *)
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++        # hardcode_minus_L: Not really in the search PATH,
++        # but as the default location of the library.
++        _LT_TAGVAR(hardcode_minus_L, $1)=yes
++        ;;
++      esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      # Try to use the -exported_symbol ld option, if it does not
++      # work, assume that -exports_file does not work either and
++      # implicitly export all symbols.
++        save_LDFLAGS="$LDFLAGS"
++        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
++        AC_LINK_IFELSE(int foo(void) {},
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
++        )
++        LDFLAGS="$save_LDFLAGS"
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(inherit_rpath, $1)=yes
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu)
++      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    newsos6)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *nto* | *qnx*)
++      ;;
++
++    openbsd*)
++      if test -f /usr/libexec/ld.so; then
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++      if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      else
++        case $host_os in
++         openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++           _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++           ;;
++         *)
++           _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++           ;;
++        esac
++      fi
++      else
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    os2*)
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++      _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    osf4* | osf5*)    # as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      else
++      _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
++      $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
++
++      # Both c and cxx compiler support -rpath directly
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++      fi
++      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    solaris*)
++      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
++      if test "$GCC" = yes; then
++      wlarc='${wl}'
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++      else
++      case `$CC -V 2>&1` in
++      *"Compilers 5.0"*)
++        wlarc=''
++        _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
++        ;;
++      *)
++        wlarc='${wl}'
++        _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++        $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
++        ;;
++      esac
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      case $host_os in
++      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++      *)
++      # The compiler driver will combine and reorder linker options,
++      # but understands `-z linker_flag'.  GCC discards it without `$wl',
++      # but is careful enough not to reorder.
++      # Supported since Solaris 2.6 (maybe 2.5.1?)
++      if test "$GCC" = yes; then
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++      else
++        _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++      fi
++      ;;
++      esac
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++      # Use $CC to link under sequent, because it throws in some extra .o
++      # files that make .init and .fini sections work.
++      _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_direct, $1)=yes
++      _LT_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++      sni)
++        _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
++      ;;
++      siemens)
++        ## LD is ld it makes a PLAMLIB
++        ## CC just makes a GrossModule.
++        _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++        _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++        _LT_TAGVAR(hardcode_direct, $1)=no
++        ;;
++      motorola)
++        _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++        _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
++      ;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4.3*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var=LD_RUN_PATH
++      hardcode_runpath_var=yes
++      _LT_TAGVAR(ld_shlibs, $1)=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++      _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++    esac
++
++    if test x$host_vendor = xsni; then
++      case $host in
++      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
++      ;;
++      esac
++    fi
++  fi
++])
++AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
++
++_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
++_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
++_LT_DECL([], [extract_expsyms_cmds], [2],
++    [The commands to extract the exported symbol list from a shared archive])
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++  # Assume -lc should be added
++  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $_LT_TAGVAR(archive_cmds, $1) in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
++      $RM conftest*
++      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
++      pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
++        _LT_TAGVAR(allow_undefined_flag, $1)=
++        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
++        then
++        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++        else
++        _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++        fi
++        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $RM conftest*
++      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
++    [Whether or not to add -lc for building shared libraries])
++_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
++    [enable_shared_with_static_runtimes], [0],
++    [Whether or not to disallow shared libs when runtime libs are static])
++_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
++    [Compiler flag to allow reflexive dlopens])
++_LT_TAGDECL([], [whole_archive_flag_spec], [1],
++    [Compiler flag to generate shared objects directly from archives])
++_LT_TAGDECL([], [compiler_needs_object], [1],
++    [Whether the compiler copes with passing no objects directly])
++_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
++    [Create an old-style archive from a shared archive])
++_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
++    [Create a temporary old-style archive to link instead of a shared archive])
++_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
++_LT_TAGDECL([], [archive_expsym_cmds], [2])
++_LT_TAGDECL([], [module_cmds], [2],
++    [Commands used to build a loadable module if different from building
++    a shared archive.])
++_LT_TAGDECL([], [module_expsym_cmds], [2])
++_LT_TAGDECL([], [with_gnu_ld], [1],
++    [Whether we are building with GNU ld or not])
++_LT_TAGDECL([], [allow_undefined_flag], [1],
++    [Flag that allows shared libraries with undefined symbols to be built])
++_LT_TAGDECL([], [no_undefined_flag], [1],
++    [Flag that enforces no undefined symbols])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
++    [Flag to hardcode $libdir into a binary during linking.
++    This must work even if $libdir does not exist])
++_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
++    [[If ld is used when linking, flag to hardcode $libdir into a binary
++    during linking.  This must work even if $libdir does not exist]])
++_LT_TAGDECL([], [hardcode_libdir_separator], [1],
++    [Whether we need a single "-rpath" flag with a separated argument])
++_LT_TAGDECL([], [hardcode_direct], [0],
++    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++    DIR into the resulting binary])
++_LT_TAGDECL([], [hardcode_direct_absolute], [0],
++    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
++    DIR into the resulting binary and the resulting library dependency is
++    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
++    library is relocated])
++_LT_TAGDECL([], [hardcode_minus_L], [0],
++    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
++    into the resulting binary])
++_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
++    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
++    into the resulting binary])
++_LT_TAGDECL([], [hardcode_automatic], [0],
++    [Set to "yes" if building a shared library automatically hardcodes DIR
++    into the library and all subsequent libraries and executables linked
++    against it])
++_LT_TAGDECL([], [inherit_rpath], [0],
++    [Set to yes if linker adds runtime paths of dependent libraries
++    to runtime path list])
++_LT_TAGDECL([], [link_all_deplibs], [0],
++    [Whether libtool must link a program against all its dependency libraries])
++_LT_TAGDECL([], [fix_srcfile_path], [1],
++    [Fix the shell variable $srcfile for the compiler])
++_LT_TAGDECL([], [always_export_symbols], [0],
++    [Set to "yes" if exported symbols are required])
++_LT_TAGDECL([], [export_symbols_cmds], [2],
++    [The commands to list exported symbols])
++_LT_TAGDECL([], [exclude_expsyms], [1],
++    [Symbols that should not be listed in the preloaded symbols])
++_LT_TAGDECL([], [include_expsyms], [1],
++    [Symbols that must always be exported])
++_LT_TAGDECL([], [prelink_cmds], [2],
++    [Commands necessary for linking programs (against libraries) with templates])
++_LT_TAGDECL([], [file_list_spec], [1],
++    [Specify filename containing input files])
++dnl FIXME: Not yet implemented
++dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
++dnl    [Compiler flag to generate thread safe objects])
++])# _LT_LINKER_SHLIBS
++
++
++# _LT_LANG_C_CONFIG([TAG])
++# ------------------------
++# Ensure that the configuration variables for a C compiler are suitably
++# defined.  These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_C_CONFIG],
++[m4_require([_LT_DECL_EGREP])dnl
++lt_save_CC="$CC"
++AC_LANG_PUSH(C)
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}'
++
++_LT_TAG_COMPILER
++# Save the default compiler, since it gets overwritten when the other
++# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
++compiler_DEFAULT=$CC
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++  _LT_COMPILER_NO_RTTI($1)
++  _LT_COMPILER_PIC($1)
++  _LT_COMPILER_C_O($1)
++  _LT_COMPILER_FILE_LOCKS($1)
++  _LT_LINKER_SHLIBS($1)
++  _LT_SYS_DYNAMIC_LINKER($1)
++  _LT_LINKER_HARDCODE_LIBPATH($1)
++  LT_SYS_DLOPEN_SELF
++  _LT_CMD_STRIPLIB
++
++  # Report which library types will actually be built
++  AC_MSG_CHECKING([if libtool supports shared libraries])
++  AC_MSG_RESULT([$can_build_shared])
++
++  AC_MSG_CHECKING([whether to build shared libraries])
++  test "$can_build_shared" = "no" && enable_shared=no
++
++  # On AIX, shared libraries and static libraries use the same namespace, and
++  # are all built from PIC.
++  case $host_os in
++  aix3*)
++    test "$enable_shared" = yes && enable_static=no
++    if test -n "$RANLIB"; then
++      archive_cmds="$archive_cmds~\$RANLIB \$lib"
++      postinstall_cmds='$RANLIB $lib'
++    fi
++    ;;
++
++  aix[[4-9]]*)
++    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++      test "$enable_shared" = yes && enable_static=no
++    fi
++    ;;
++  esac
++  AC_MSG_RESULT([$enable_shared])
++
++  AC_MSG_CHECKING([whether to build static libraries])
++  # Make sure either enable_shared or enable_static is yes.
++  test "$enable_shared" = yes || enable_static=yes
++  AC_MSG_RESULT([$enable_static])
++
++  _LT_CONFIG($1)
++fi
++AC_LANG_POP
++CC="$lt_save_CC"
++])# _LT_LANG_C_CONFIG
++
++
++# _LT_PROG_CXX
++# ------------
++# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
++# compiler, we have our own version here.
++m4_defun([_LT_PROG_CXX],
++[
++pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
++AC_PROG_CXX
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++    (test "X$CXX" != "Xg++"))) ; then
++  AC_PROG_CXXCPP
++else
++  _lt_caught_CXX_error=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_CXX
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_CXX], [])
++
++
++# _LT_LANG_CXX_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a C++ compiler are suitably
++# defined.  These variables are subsequently used by _LT_CONFIG to write
++# the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_CXX_CONFIG],
++[AC_REQUIRE([_LT_PROG_CXX])dnl
++m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++m4_require([_LT_DECL_EGREP])dnl
++
++AC_LANG_PUSH(C++)
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(compiler_needs_object, $1)=no
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for C++ test sources.
++ac_ext=cpp
++
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the CXX compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_caught_CXX_error" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="int some_variable = 0;"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC=$CC
++  lt_save_LD=$LD
++  lt_save_GCC=$GCC
++  GCC=$GXX
++  lt_save_with_gnu_ld=$with_gnu_ld
++  lt_save_path_LD=$lt_cv_path_LD
++  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++  else
++    $as_unset lt_cv_prog_gnu_ld
++  fi
++  if test -n "${lt_cv_path_LDCXX+set}"; then
++    lt_cv_path_LD=$lt_cv_path_LDCXX
++  else
++    $as_unset lt_cv_path_LD
++  fi
++  test -z "${LDCXX+set}" || LD=$LDCXX
++  CC=${CXX-"c++"}
++  compiler=$CC
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++
++  if test -n "$compiler"; then
++    # We don't want -fno-exception when compiling C++ code, so set the
++    # no_builtin_flag separately
++    if test "$GXX" = yes; then
++      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++    else
++      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++    fi
++
++    if test "$GXX" = yes; then
++      # Set up default GNU C++ configuration
++
++      LT_PATH_LD
++
++      # Check if GNU C++ uses GNU ld as the underlying linker, since the
++      # archiving commands below assume that GNU ld is being used.
++      if test "$with_gnu_ld" = yes; then
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++        # If archive_cmds runs LD, not CC, wlarc should be empty
++        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++        #     investigate it a little bit more. (MM)
++        wlarc='${wl}'
++
++        # ancient GNU ld didn't support --whole-archive et. al.
++        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
++        $GREP 'no-whole-archive' > /dev/null; then
++          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++        else
++          _LT_TAGVAR(whole_archive_flag_spec, $1)=
++        fi
++      else
++        with_gnu_ld=no
++        wlarc=
++
++        # A generic and very simple default shared library creation
++        # command for GNU C++ for the case where it uses the native
++        # linker, instead of GNU ld.  If possible, this setting should
++        # overridden to take advantage of the native linker features on
++        # the platform it is being used on.
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++      fi
++
++      # Commands to make compiler produce verbose output that lists
++      # what "hidden" libraries, object files and flags are used when
++      # linking a shared library.
++      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++
++    else
++      GXX=no
++      with_gnu_ld=no
++      wlarc=
++    fi
++
++    # PORTME: fill in a description of your system's C++ link characteristics
++    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++    _LT_TAGVAR(ld_shlibs, $1)=yes
++    case $host_os in
++      aix3*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++      aix[[4-9]]*)
++        if test "$host_cpu" = ia64; then
++          # On IA64, the linker does run time linking by default, so we don't
++          # have to do anything special.
++          aix_use_runtimelinking=no
++          exp_sym_flag='-Bexport'
++          no_entry_flag=""
++        else
++          aix_use_runtimelinking=no
++
++          # Test if we are trying to use run time linking or normal
++          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++          # need to do runtime linking.
++          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
++          for ld_flag in $LDFLAGS; do
++            case $ld_flag in
++            *-brtl*)
++              aix_use_runtimelinking=yes
++              break
++              ;;
++            esac
++          done
++          ;;
++          esac
++
++          exp_sym_flag='-bexport'
++          no_entry_flag='-bnoentry'
++        fi
++
++        # When large executables or shared objects are built, AIX ld can
++        # have problems creating the table of contents.  If linking a library
++        # or program results in "error TOC overflow" add -mminimal-toc to
++        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++        _LT_TAGVAR(archive_cmds, $1)=''
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++        _LT_TAGVAR(link_all_deplibs, $1)=yes
++        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
++
++        if test "$GXX" = yes; then
++          case $host_os in aix4.[[012]]|aix4.[[012]].*)
++          # We only want to do this on AIX 4.2 and lower, the check
++          # below for broken collect2 doesn't work under 4.3+
++        collect2name=`${CC} -print-prog-name=collect2`
++        if test -f "$collect2name" &&
++           strings "$collect2name" | $GREP resolve_lib_name >/dev/null
++        then
++          # We have reworked collect2
++          :
++        else
++          # We have old collect2
++          _LT_TAGVAR(hardcode_direct, $1)=unsupported
++          # It fails to find uninstalled libraries when the uninstalled
++          # path is not listed in the libpath.  Setting hardcode_minus_L
++          # to unsupported forces relinking
++          _LT_TAGVAR(hardcode_minus_L, $1)=yes
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++          _LT_TAGVAR(hardcode_libdir_separator, $1)=
++        fi
++          esac
++          shared_flag='-shared'
++        if test "$aix_use_runtimelinking" = yes; then
++          shared_flag="$shared_flag "'${wl}-G'
++        fi
++        else
++          # not using gcc
++          if test "$host_cpu" = ia64; then
++        # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++        # chokes on -Wl,-G. The following line is correct:
++        shared_flag='-G'
++          else
++          if test "$aix_use_runtimelinking" = yes; then
++            shared_flag='${wl}-G'
++          else
++            shared_flag='${wl}-bM:SRE'
++          fi
++          fi
++        fi
++
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
++        # It seems that -bexpall does not export symbols beginning with
++        # underscore (_), so it is better to generate a list of symbols to
++      # export.
++        _LT_TAGVAR(always_export_symbols, $1)=yes
++        if test "$aix_use_runtimelinking" = yes; then
++          # Warning - without using the other runtime loading flags (-brtl),
++          # -berok will link without error, but may produce a broken library.
++          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
++          # Determine the default libpath from the value encoded in an empty
++          # executable.
++          _LT_SYS_MODULE_PATH_AIX
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++        else
++          if test "$host_cpu" = ia64; then
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++          _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++          else
++          # Determine the default libpath from the value encoded in an
++          # empty executable.
++          _LT_SYS_MODULE_PATH_AIX
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++          # Warning - without using the other run time loading flags,
++          # -berok will link without error, but may produce a broken library.
++          _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++          _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++          # Exported symbols can be pulled into shared objects from archives
++          _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++          _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
++          # This is similar to how AIX traditionally builds its shared
++          # libraries.
++          _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++          fi
++        fi
++        ;;
++
++      beos*)
++      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
++        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++        # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++        # support --undefined.  This deserves some investigation.  FIXME
++        _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++        _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++      chorus*)
++        case $cc_basename in
++          *)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++        esac
++        ;;
++
++      cygwin* | mingw* | pw32* | cegcc*)
++        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++        # as there is no search path for DLLs.
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
++        _LT_TAGVAR(always_export_symbols, $1)=no
++        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++          # If the export-symbols file already is a .def file (1st line
++          # is EXPORTS), use it as is; otherwise, prepend...
++          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++          cp $export_symbols $output_objdir/$soname.def;
++          else
++          echo EXPORTS > $output_objdir/$soname.def;
++          cat $export_symbols >> $output_objdir/$soname.def;
++          fi~
++          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++        else
++          _LT_TAGVAR(ld_shlibs, $1)=no
++        fi
++        ;;
++      darwin* | rhapsody*)
++        _LT_DARWIN_LINKER_FEATURES($1)
++      ;;
++
++      dgux*)
++        case $cc_basename in
++          ec++*)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          ghcx*)
++          # Green Hills C++ Compiler
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          *)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++        esac
++        ;;
++
++      freebsd[[12]]*)
++        # C++ shared libraries reported to be fairly broken before
++      # switch to ELF
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      freebsd-elf*)
++        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++        ;;
++
++      freebsd* | dragonfly*)
++        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++        # conventions
++        _LT_TAGVAR(ld_shlibs, $1)=yes
++        ;;
++
++      gnu*)
++        ;;
++
++      hpux9*)
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++                                           # but as the default
++                                           # location of the library.
++
++        case $cc_basename in
++          CC*)
++            # FIXME: insert proper C++ library support
++            _LT_TAGVAR(ld_shlibs, $1)=no
++            ;;
++          aCC*)
++            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++            # Commands to make compiler produce verbose output that lists
++            # what "hidden" libraries, object files and flags are used when
++            # linking a shared library.
++            #
++            # There doesn't appear to be a way to prevent this compiler from
++            # explicitly linking system object files so we need to strip them
++            # from the output so that they don't get included in the library
++            # dependencies.
++            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++            ;;
++          *)
++            if test "$GXX" = yes; then
++              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++            else
++              # FIXME: insert proper C++ library support
++              _LT_TAGVAR(ld_shlibs, $1)=no
++            fi
++            ;;
++        esac
++        ;;
++
++      hpux10*|hpux11*)
++        if test $with_gnu_ld = no; then
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++          case $host_cpu in
++            hppa*64*|ia64*)
++              ;;
++            *)
++            _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++              ;;
++          esac
++        fi
++        case $host_cpu in
++          hppa*64*|ia64*)
++            _LT_TAGVAR(hardcode_direct, $1)=no
++            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++            ;;
++          *)
++            _LT_TAGVAR(hardcode_direct, $1)=yes
++            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++                                               # but as the default
++                                               # location of the library.
++            ;;
++        esac
++
++        case $cc_basename in
++          CC*)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          aCC*)
++          case $host_cpu in
++            hppa*64*)
++              _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++              ;;
++            ia64*)
++              _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++              ;;
++            *)
++              _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++              ;;
++          esac
++          # Commands to make compiler produce verbose output that lists
++          # what "hidden" libraries, object files and flags are used when
++          # linking a shared library.
++          #
++          # There doesn't appear to be a way to prevent this compiler from
++          # explicitly linking system object files so we need to strip them
++          # from the output so that they don't get included in the library
++          # dependencies.
++          output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++          ;;
++          *)
++          if test "$GXX" = yes; then
++            if test $with_gnu_ld = no; then
++              case $host_cpu in
++                hppa*64*)
++                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++                  ;;
++                ia64*)
++                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++                  ;;
++                *)
++                  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++                  ;;
++              esac
++            fi
++          else
++            # FIXME: insert proper C++ library support
++            _LT_TAGVAR(ld_shlibs, $1)=no
++          fi
++          ;;
++        esac
++        ;;
++
++      interix[[3-9]]*)
++      _LT_TAGVAR(hardcode_direct, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++      irix5* | irix6*)
++        case $cc_basename in
++          CC*)
++          # SGI C++
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++
++          # Archives containing C++ object files must be created using
++          # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
++          # necessary to make sure instantiated templates are included
++          # in the archive.
++          _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++          ;;
++          *)
++          if test "$GXX" = yes; then
++            if test "$with_gnu_ld" = no; then
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++            else
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
++            fi
++          fi
++          _LT_TAGVAR(link_all_deplibs, $1)=yes
++          ;;
++        esac
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++        _LT_TAGVAR(inherit_rpath, $1)=yes
++        ;;
++
++      linux* | k*bsd*-gnu | kopensolaris*-gnu)
++        case $cc_basename in
++          KCC*)
++          # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++          # KCC will only create a shared library if the output file
++          # ends with ".so" (or ".sl" for HP-UX), so rename the library
++          # to its proper name (with version) after linking.
++          _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++          # Commands to make compiler produce verbose output that lists
++          # what "hidden" libraries, object files and flags are used when
++          # linking a shared library.
++          #
++          # There doesn't appear to be a way to prevent this compiler from
++          # explicitly linking system object files so we need to strip them
++          # from the output so that they don't get included in the library
++          # dependencies.
++          output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++          # Archives containing C++ object files must be created using
++          # "CC -Bstatic", where "CC" is the KAI C++ compiler.
++          _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++          ;;
++        icpc* | ecpc* )
++          # Intel C++
++          with_gnu_ld=yes
++          # version 8.0 and above of icpc choke on multiply defined symbols
++          # if we add $predep_objects and $postdep_objects, however 7.1 and
++          # earlier do not add the objects themselves.
++          case `$CC -V 2>&1` in
++            *"Version 7."*)
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++              ;;
++            *)  # Version 8.0 or newer
++              tmp_idyn=
++              case $host_cpu in
++                ia64*) tmp_idyn=' -i_dynamic';;
++              esac
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++              _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++              ;;
++          esac
++          _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++          ;;
++          pgCC* | pgcpp*)
++            # Portland Group C++ compiler
++          case `$CC -V` in
++          *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
++            _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
++              rm -rf $tpldir~
++              $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
++              compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
++            _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
++              rm -rf $tpldir~
++              $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
++              $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
++              $RANLIB $oldlib'
++            _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
++              rm -rf $tpldir~
++              $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++              $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
++              rm -rf $tpldir~
++              $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
++              $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++            ;;
++          *) # Version 6 will use weak symbols
++            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++            ;;
++          esac
++
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++          _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++            ;;
++        cxx*)
++          # Compaq C++
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++
++          runpath_var=LD_RUN_PATH
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++          _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++          # Commands to make compiler produce verbose output that lists
++          # what "hidden" libraries, object files and flags are used when
++          # linking a shared library.
++          #
++          # There doesn't appear to be a way to prevent this compiler from
++          # explicitly linking system object files so we need to strip them
++          # from the output so that they don't get included in the library
++          # dependencies.
++          output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++          ;;
++        xl*)
++          # IBM XL 8.0 on PPC, with GNU ld
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++          _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++          if test "x$supports_anon_versioning" = xyes; then
++            _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
++              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++              echo "local: *; };" >> $output_objdir/$libname.ver~
++              $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++          fi
++          ;;
++        *)
++          case `$CC -V 2>&1 | sed 5q` in
++          *Sun\ C*)
++            # Sun C++ 5.9
++            _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++            _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++            _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++            _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
++            _LT_TAGVAR(compiler_needs_object, $1)=yes
++
++            # Not sure whether something based on
++            # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
++            # would be better.
++            output_verbose_link_cmd='echo'
++
++            # Archives containing C++ object files must be created using
++            # "CC -xar", where "CC" is the Sun C++ compiler.  This is
++            # necessary to make sure instantiated templates are included
++            # in the archive.
++            _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++            ;;
++          esac
++          ;;
++      esac
++      ;;
++
++      lynxos*)
++        # FIXME: insert proper C++ library support
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++      m88k*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++      mvs*)
++        case $cc_basename in
++          cxx*)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++        *)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++      esac
++      ;;
++
++      netbsd*)
++        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
++        _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++        wlarc=
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      fi
++      # Workaround some broken pre-1.5 toolchains
++      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++      ;;
++
++      *nto* | *qnx*)
++        _LT_TAGVAR(ld_shlibs, $1)=yes
++      ;;
++
++      openbsd2*)
++        # C++ shared libraries are fairly broken
++      _LT_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++      openbsd*)
++      if test -f /usr/libexec/ld.so; then
++        _LT_TAGVAR(hardcode_direct, $1)=yes
++        _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++          _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++        fi
++        output_verbose_link_cmd=echo
++      else
++        _LT_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++      osf3* | osf4* | osf5*)
++        case $cc_basename in
++          KCC*)
++          # Kuck and Associates, Inc. (KAI) C++ Compiler
++
++          # KCC will only create a shared library if the output file
++          # ends with ".so" (or ".sl" for HP-UX), so rename the library
++          # to its proper name (with version) after linking.
++          _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++          _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++          # Archives containing C++ object files must be created using
++          # the KAI C++ compiler.
++          case $host in
++            osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
++            *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
++          esac
++          ;;
++          RCC*)
++          # Rational C++ 2.4.1
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          cxx*)
++          case $host in
++            osf3*)
++              _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++              ;;
++            *)
++              _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
++              _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++                echo "-hidden">> $lib.exp~
++                $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
++                $RM $lib.exp'
++              _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++              ;;
++          esac
++
++          _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++          # Commands to make compiler produce verbose output that lists
++          # what "hidden" libraries, object files and flags are used when
++          # linking a shared library.
++          #
++          # There doesn't appear to be a way to prevent this compiler from
++          # explicitly linking system object files so we need to strip them
++          # from the output so that they don't get included in the library
++          # dependencies.
++          output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
++          ;;
++        *)
++          if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++            _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++            case $host in
++              osf3*)
++                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++                ;;
++              *)
++                _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++                ;;
++            esac
++
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++            _LT_TAGVAR(hardcode_libdir_separator, $1)=:
++
++            # Commands to make compiler produce verbose output that lists
++            # what "hidden" libraries, object files and flags are used when
++            # linking a shared library.
++            output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++
++          else
++            # FIXME: insert proper C++ library support
++            _LT_TAGVAR(ld_shlibs, $1)=no
++          fi
++          ;;
++        esac
++        ;;
++
++      psos*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      sunos4*)
++        case $cc_basename in
++          CC*)
++          # Sun C++ 4.x
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          lcc*)
++          # Lucid
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          *)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++        esac
++        ;;
++
++      solaris*)
++        case $cc_basename in
++          CC*)
++          # Sun C++ 4.2, 5.x and Centerline C++
++            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
++          _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++          _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++            $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++          _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++          case $host_os in
++            solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++            *)
++              # The compiler driver will combine and reorder linker options,
++              # but understands `-z linker_flag'.
++              # Supported since Solaris 2.6 (maybe 2.5.1?)
++              _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
++              ;;
++          esac
++          _LT_TAGVAR(link_all_deplibs, $1)=yes
++
++          output_verbose_link_cmd='echo'
++
++          # Archives containing C++ object files must be created using
++          # "CC -xar", where "CC" is the Sun C++ compiler.  This is
++          # necessary to make sure instantiated templates are included
++          # in the archive.
++          _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++          ;;
++          gcx*)
++          # Green Hills C++ Compiler
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++
++          # The C++ compiler must be used to create the archive.
++          _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++          ;;
++          *)
++          # GNU C++ compiler with Solaris linker
++          if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++            _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++            if $CC --version | $GREP -v '^2\.7' > /dev/null; then
++              _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++              _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++                $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++              # Commands to make compiler produce verbose output that lists
++              # what "hidden" libraries, object files and flags are used when
++              # linking a shared library.
++              output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++            else
++              # g++ 2.7 appears to require `-G' NOT `-shared' on this
++              # platform.
++              _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++              _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
++                $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
++
++              # Commands to make compiler produce verbose output that lists
++              # what "hidden" libraries, object files and flags are used when
++              # linking a shared library.
++              output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
++            fi
++
++            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++            case $host_os in
++              solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++              *)
++                _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
++                ;;
++            esac
++          fi
++          ;;
++        esac
++        ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var='LD_RUN_PATH'
++
++      case $cc_basename in
++        CC*)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      *)
++        _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++        ;;
++      esac
++      ;;
++
++      sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
++      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      case $cc_basename in
++          CC*)
++          _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++          ;;
++        *)
++          _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++          ;;
++      esac
++      ;;
++
++      tandem*)
++        case $cc_basename in
++          NCC*)
++          # NonStop-UX NCC 3.20
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++          *)
++          # FIXME: insert proper C++ library support
++          _LT_TAGVAR(ld_shlibs, $1)=no
++          ;;
++        esac
++        ;;
++
++      vxworks*)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++
++      *)
++        # FIXME: insert proper C++ library support
++        _LT_TAGVAR(ld_shlibs, $1)=no
++        ;;
++    esac
++
++    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
++    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++    _LT_TAGVAR(GCC, $1)="$GXX"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_SYS_HIDDEN_LIBDEPS($1)
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  CC=$lt_save_CC
++  LDCXX=$LD
++  LD=$lt_save_LD
++  GCC=$lt_save_GCC
++  with_gnu_ld=$lt_save_with_gnu_ld
++  lt_cv_path_LDCXX=$lt_cv_path_LD
++  lt_cv_path_LD=$lt_save_path_LD
++  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++fi # test "$_lt_caught_CXX_error" != yes
++
++AC_LANG_POP
++])# _LT_LANG_CXX_CONFIG
++
++
++# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
++# ---------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
++[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
++# Dependencies to place before and after the object being linked:
++_LT_TAGVAR(predep_objects, $1)=
++_LT_TAGVAR(postdep_objects, $1)=
++_LT_TAGVAR(predeps, $1)=
++_LT_TAGVAR(postdeps, $1)=
++_LT_TAGVAR(compiler_lib_search_path, $1)=
++
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library.  It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
++int a;
++void foo (void) { a = 0; }
++_LT_EOF
++], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
++class Foo
++{
++public:
++  Foo (void) { a = 0; }
++private:
++  int a;
++};
++_LT_EOF
++], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
++      subroutine foo
++      implicit none
++      integer*4 a
++      a=0
++      return
++      end
++_LT_EOF
++], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
++      subroutine foo
++      implicit none
++      integer a
++      a=0
++      return
++      end
++_LT_EOF
++], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
++public class foo {
++  private int a;
++  public void bar (void) {
++    a = 0;
++  }
++};
++_LT_EOF
++])
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++  # Parse the compiler output and extract the necessary
++  # objects, libraries and library flags.
++
++  # Sentinel used to keep track of whether or not we are before
++  # the conftest object file.
++  pre_test_object_deps_done=no
++
++  for p in `eval "$output_verbose_link_cmd"`; do
++    case $p in
++
++    -L* | -R* | -l*)
++       # Some compilers place space between "-{L,R}" and the path.
++       # Remove the space.
++       if test $p = "-L" ||
++          test $p = "-R"; then
++       prev=$p
++       continue
++       else
++       prev=
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++       case $p in
++       -L* | -R*)
++         # Internal compiler library paths should come after those
++         # provided the user.  The postdeps already come after the
++         # user supplied libs so there is no need to process them.
++         if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
++           _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++         else
++           _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++         fi
++         ;;
++       # The "-l" case would never come before the object being
++       # linked, so don't bother handling this case.
++       esac
++       else
++       if test -z "$_LT_TAGVAR(postdeps, $1)"; then
++         _LT_TAGVAR(postdeps, $1)="${prev}${p}"
++       else
++         _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
++       fi
++       fi
++       ;;
++
++    *.$objext)
++       # This assumes that the test object file only shows up
++       # once in the compiler output.
++       if test "$p" = "conftest.$objext"; then
++       pre_test_object_deps_done=yes
++       continue
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++       if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
++         _LT_TAGVAR(predep_objects, $1)="$p"
++       else
++         _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
++       fi
++       else
++       if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
++         _LT_TAGVAR(postdep_objects, $1)="$p"
++       else
++         _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
++       fi
++       fi
++       ;;
++
++    *) ;; # Ignore the rest.
++
++    esac
++  done
++
++  # Clean up.
++  rm -f a.out a.exe
++else
++  echo "libtool.m4: error: problem compiling $1 test program"
++fi
++
++$RM -f confest.$objext
++
++# PORTME: override above test on systems where it is broken
++m4_if([$1], [CXX],
++[case $host_os in
++interix[[3-9]]*)
++  # Interix 3.5 installs completely hosed .la files for C++, so rather than
++  # hack all around it, let's just trust "g++" to DTRT.
++  _LT_TAGVAR(predep_objects,$1)=
++  _LT_TAGVAR(postdep_objects,$1)=
++  _LT_TAGVAR(postdeps,$1)=
++  ;;
++
++linux*)
++  case `$CC -V 2>&1 | sed 5q` in
++  *Sun\ C*)
++    # Sun C++ 5.9
++
++    # The more standards-conforming stlport4 library is
++    # incompatible with the Cstd library. Avoid specifying
++    # it if it's in CXXFLAGS. Ignore libCrun as
++    # -library=stlport4 depends on it.
++    case " $CXX $CXXFLAGS " in
++    *" -library=stlport4 "*)
++      solaris_use_stlport4=yes
++      ;;
++    esac
++
++    if test "$solaris_use_stlport4" != yes; then
++      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++    fi
++    ;;
++  esac
++  ;;
++
++solaris*)
++  case $cc_basename in
++  CC*)
++    # The more standards-conforming stlport4 library is
++    # incompatible with the Cstd library. Avoid specifying
++    # it if it's in CXXFLAGS. Ignore libCrun as
++    # -library=stlport4 depends on it.
++    case " $CXX $CXXFLAGS " in
++    *" -library=stlport4 "*)
++      solaris_use_stlport4=yes
++      ;;
++    esac
++
++    # Adding this requires a known-good setup of shared libraries for
++    # Sun compiler versions before 5.6, else PIC objects from an old
++    # archive will be linked into the output, leading to subtle bugs.
++    if test "$solaris_use_stlport4" != yes; then
++      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
++    fi
++    ;;
++  esac
++  ;;
++esac
++])
++
++case " $_LT_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
++if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
++ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
++fi
++_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
++    [The directories searched by this compiler when creating a shared library])
++_LT_TAGDECL([], [predep_objects], [1],
++    [Dependencies to place before and after the objects being linked to
++    create a shared library])
++_LT_TAGDECL([], [postdep_objects], [1])
++_LT_TAGDECL([], [predeps], [1])
++_LT_TAGDECL([], [postdeps], [1])
++_LT_TAGDECL([], [compiler_lib_search_path], [1],
++    [The library search path used internally by the compiler when linking
++    a shared library])
++])# _LT_SYS_HIDDEN_LIBDEPS
++
++
++# _LT_PROG_F77
++# ------------
++# Since AC_PROG_F77 is broken, in that it returns the empty string
++# if there is no fortran compiler, we have our own version here.
++m4_defun([_LT_PROG_F77],
++[
++pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
++AC_PROG_F77
++if test -z "$F77" || test "X$F77" = "Xno"; then
++  _lt_disable_F77=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_F77
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_F77], [])
++
++
++# _LT_LANG_F77_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for a Fortran 77 compiler are
++# suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_F77_CONFIG],
++[AC_REQUIRE([_LT_PROG_F77])dnl
++AC_LANG_PUSH(Fortran 77)
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for f77 test sources.
++ac_ext=f
++
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the F77 compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_F77" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="\
++      subroutine t
++      return
++      end
++"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code="\
++      program t
++      end
++"
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC="$CC"
++  lt_save_GCC=$GCC
++  CC=${F77-"f77"}
++  compiler=$CC
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++  GCC=$G77
++  if test -n "$compiler"; then
++    AC_MSG_CHECKING([if libtool supports shared libraries])
++    AC_MSG_RESULT([$can_build_shared])
++
++    AC_MSG_CHECKING([whether to build shared libraries])
++    test "$can_build_shared" = "no" && enable_shared=no
++
++    # On AIX, shared libraries and static libraries use the same namespace, and
++    # are all built from PIC.
++    case $host_os in
++      aix3*)
++        test "$enable_shared" = yes && enable_static=no
++        if test -n "$RANLIB"; then
++          archive_cmds="$archive_cmds~\$RANLIB \$lib"
++          postinstall_cmds='$RANLIB $lib'
++        fi
++        ;;
++      aix[[4-9]]*)
++      if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++        test "$enable_shared" = yes && enable_static=no
++      fi
++        ;;
++    esac
++    AC_MSG_RESULT([$enable_shared])
++
++    AC_MSG_CHECKING([whether to build static libraries])
++    # Make sure either enable_shared or enable_static is yes.
++    test "$enable_shared" = yes || enable_static=yes
++    AC_MSG_RESULT([$enable_static])
++
++    _LT_TAGVAR(GCC, $1)="$G77"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  GCC=$lt_save_GCC
++  CC="$lt_save_CC"
++fi # test "$_lt_disable_F77" != yes
++
++AC_LANG_POP
++])# _LT_LANG_F77_CONFIG
++
++
++# _LT_PROG_FC
++# -----------
++# Since AC_PROG_FC is broken, in that it returns the empty string
++# if there is no fortran compiler, we have our own version here.
++m4_defun([_LT_PROG_FC],
++[
++pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
++AC_PROG_FC
++if test -z "$FC" || test "X$FC" = "Xno"; then
++  _lt_disable_FC=yes
++fi
++popdef([AC_MSG_ERROR])
++])# _LT_PROG_FC
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([_LT_PROG_FC], [])
++
++
++# _LT_LANG_FC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for a Fortran compiler are
++# suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_FC_CONFIG],
++[AC_REQUIRE([_LT_PROG_FC])dnl
++AC_LANG_PUSH(Fortran)
++
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_TAGVAR(allow_undefined_flag, $1)=
++_LT_TAGVAR(always_export_symbols, $1)=no
++_LT_TAGVAR(archive_expsym_cmds, $1)=
++_LT_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_TAGVAR(hardcode_direct, $1)=no
++_LT_TAGVAR(hardcode_direct_absolute, $1)=no
++_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_TAGVAR(hardcode_minus_L, $1)=no
++_LT_TAGVAR(hardcode_automatic, $1)=no
++_LT_TAGVAR(inherit_rpath, $1)=no
++_LT_TAGVAR(module_cmds, $1)=
++_LT_TAGVAR(module_expsym_cmds, $1)=
++_LT_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_TAGVAR(no_undefined_flag, $1)=
++_LT_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for fc test sources.
++ac_ext=${ac_fc_srcext-f}
++
++# Object file extension for compiled fc test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# No sense in running all these tests if we already determined that
++# the FC compiler isn't working.  Some variables (like enable_shared)
++# are currently assumed to apply to all compilers on this platform,
++# and will be corrupted by setting them based on a non-working compiler.
++if test "$_lt_disable_FC" != yes; then
++  # Code to be used in simple compile tests
++  lt_simple_compile_test_code="\
++      subroutine t
++      return
++      end
++"
++
++  # Code to be used in simple link tests
++  lt_simple_link_test_code="\
++      program t
++      end
++"
++
++  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
++  _LT_TAG_COMPILER
++
++  # save warnings/boilerplate of simple test code
++  _LT_COMPILER_BOILERPLATE
++  _LT_LINKER_BOILERPLATE
++
++  # Allow CC to be a program name with arguments.
++  lt_save_CC="$CC"
++  lt_save_GCC=$GCC
++  CC=${FC-"f95"}
++  compiler=$CC
++  GCC=$ac_cv_fc_compiler_gnu
++
++  _LT_TAGVAR(compiler, $1)=$CC
++  _LT_CC_BASENAME([$compiler])
++
++  if test -n "$compiler"; then
++    AC_MSG_CHECKING([if libtool supports shared libraries])
++    AC_MSG_RESULT([$can_build_shared])
++
++    AC_MSG_CHECKING([whether to build shared libraries])
++    test "$can_build_shared" = "no" && enable_shared=no
++
++    # On AIX, shared libraries and static libraries use the same namespace, and
++    # are all built from PIC.
++    case $host_os in
++      aix3*)
++        test "$enable_shared" = yes && enable_static=no
++        if test -n "$RANLIB"; then
++          archive_cmds="$archive_cmds~\$RANLIB \$lib"
++          postinstall_cmds='$RANLIB $lib'
++        fi
++        ;;
++      aix[[4-9]]*)
++      if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++        test "$enable_shared" = yes && enable_static=no
++      fi
++        ;;
++    esac
++    AC_MSG_RESULT([$enable_shared])
++
++    AC_MSG_CHECKING([whether to build static libraries])
++    # Make sure either enable_shared or enable_static is yes.
++    test "$enable_shared" = yes || enable_static=yes
++    AC_MSG_RESULT([$enable_static])
++
++    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
++    _LT_TAGVAR(LD, $1)="$LD"
++
++    ## CAVEAT EMPTOR:
++    ## There is no encapsulation within the following macros, do not change
++    ## the running order or otherwise move them around unless you know exactly
++    ## what you are doing...
++    _LT_SYS_HIDDEN_LIBDEPS($1)
++    _LT_COMPILER_PIC($1)
++    _LT_COMPILER_C_O($1)
++    _LT_COMPILER_FILE_LOCKS($1)
++    _LT_LINKER_SHLIBS($1)
++    _LT_SYS_DYNAMIC_LINKER($1)
++    _LT_LINKER_HARDCODE_LIBPATH($1)
++
++    _LT_CONFIG($1)
++  fi # test -n "$compiler"
++
++  GCC=$lt_save_GCC
++  CC="$lt_save_CC"
++fi # test "$_lt_disable_FC" != yes
++
++AC_LANG_POP
++])# _LT_LANG_FC_CONFIG
++
++
++# _LT_LANG_GCJ_CONFIG([TAG])
++# --------------------------
++# Ensure that the configuration variables for the GNU Java Compiler compiler
++# are suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_GCJ_CONFIG],
++[AC_REQUIRE([LT_PROG_GCJ])dnl
++AC_LANG_SAVE
++
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_GCC=$GCC
++GCC=yes
++CC=${GCJ-"gcj"}
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_TAGVAR(LD, $1)="$LD"
++_LT_CC_BASENAME([$compiler])
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++
++## CAVEAT EMPTOR:
++## There is no encapsulation within the following macros, do not change
++## the running order or otherwise move them around unless you know exactly
++## what you are doing...
++if test -n "$compiler"; then
++  _LT_COMPILER_NO_RTTI($1)
++  _LT_COMPILER_PIC($1)
++  _LT_COMPILER_C_O($1)
++  _LT_COMPILER_FILE_LOCKS($1)
++  _LT_LINKER_SHLIBS($1)
++  _LT_LINKER_HARDCODE_LIBPATH($1)
++
++  _LT_CONFIG($1)
++fi
++
++AC_LANG_RESTORE
++
++GCC=$lt_save_GCC
++CC="$lt_save_CC"
++])# _LT_LANG_GCJ_CONFIG
++
++
++# _LT_LANG_RC_CONFIG([TAG])
++# -------------------------
++# Ensure that the configuration variables for the Windows resource compiler
++# are suitably defined.  These variables are subsequently used by _LT_CONFIG
++# to write the compiler configuration to `libtool'.
++m4_defun([_LT_LANG_RC_CONFIG],
++[AC_REQUIRE([LT_PROG_RC])dnl
++AC_LANG_SAVE
++
++# Source file extension for RC test sources.
++ac_ext=rc
++
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_TAG_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++lt_save_GCC=$GCC
++GCC=
++CC=${RC-"windres"}
++compiler=$CC
++_LT_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++
++if test -n "$compiler"; then
++  :
++  _LT_CONFIG($1)
++fi
++
++GCC=$lt_save_GCC
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# _LT_LANG_RC_CONFIG
++
++
++# LT_PROG_GCJ
++# -----------
++AC_DEFUN([LT_PROG_GCJ],
++[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
++  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
++    [AC_CHECK_TOOL(GCJ, gcj,)
++      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++      AC_SUBST(GCJFLAGS)])])[]dnl
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
++
++
++# LT_PROG_RC
++# ----------
++AC_DEFUN([LT_PROG_RC],
++[AC_CHECK_TOOL(RC, windres,)
++])
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_RC], [])
++
++
++# _LT_DECL_EGREP
++# --------------
++# If we don't have a new enough Autoconf to choose the best grep
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_EGREP],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_REQUIRE([AC_PROG_FGREP])dnl
++test -z "$GREP" && GREP=grep
++_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
++_LT_DECL([], [EGREP], [1], [An ERE matcher])
++_LT_DECL([], [FGREP], [1], [A literal string matcher])
++dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
++AC_SUBST([GREP])
++])
++
++
++# _LT_DECL_OBJDUMP
++# --------------
++# If we don't have a new enough Autoconf to choose the best objdump
++# available, choose the one first in the user's PATH.
++m4_defun([_LT_DECL_OBJDUMP],
++[AC_CHECK_TOOL(OBJDUMP, objdump, false)
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
++AC_SUBST([OBJDUMP])
++])
++
++
++# _LT_DECL_SED
++# ------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible.  Prefer GNU sed if found.
++m4_defun([_LT_DECL_SED],
++[AC_PROG_SED
++test -z "$SED" && SED=sed
++Xsed="$SED -e 1s/^X//"
++_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
++_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
++    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
++])# _LT_DECL_SED
++
++m4_ifndef([AC_PROG_SED], [
++############################################################
++# NOTE: This macro has been submitted for inclusion into   #
++#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
++#  a released version of Autoconf we should remove this    #
++#  macro and use it instead.                               #
++############################################################
++
++m4_defun([AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for lt_ac_prog in sed gsed; do
++    for ac_exec_ext in '' $ac_executable_extensions; do
++      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++      fi
++    done
++  done
++done
++IFS=$as_save_IFS
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++  test ! -f $lt_ac_sed && continue
++  cat /dev/null > conftest.in
++  lt_ac_count=0
++  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++  # Check for GNU sed and select it if it is found.
++  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++    lt_cv_path_SED=$lt_ac_sed
++    break
++  fi
++  while true; do
++    cat conftest.in conftest.in >conftest.tmp
++    mv conftest.tmp conftest.in
++    cp conftest.in conftest.nl
++    echo >>conftest.nl
++    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++    cmp -s conftest.out conftest.nl || break
++    # 10000 chars as input seems more than enough
++    test $lt_ac_count -gt 10 && break
++    lt_ac_count=`expr $lt_ac_count + 1`
++    if test $lt_ac_count -gt $lt_ac_max; then
++      lt_ac_max=$lt_ac_count
++      lt_cv_path_SED=$lt_ac_sed
++    fi
++  done
++done
++])
++SED=$lt_cv_path_SED
++AC_SUBST([SED])
++AC_MSG_RESULT([$SED])
++])#AC_PROG_SED
++])#m4_ifndef
++
++# Old name:
++AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([LT_AC_PROG_SED], [])
++
++
++# _LT_CHECK_SHELL_FEATURES
++# ------------------------
++# Find out whether the shell is Bourne or XSI compatible,
++# or has some other useful features.
++m4_defun([_LT_CHECK_SHELL_FEATURES],
++[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
++# Try some XSI features
++xsi_shell=no
++( _lt_dummy="a/b/c"
++  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
++      = c,a/b,, \
++    && eval 'test $(( 1 + 1 )) -eq 2 \
++    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
++  && xsi_shell=yes
++AC_MSG_RESULT([$xsi_shell])
++_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
++
++AC_MSG_CHECKING([whether the shell understands "+="])
++lt_shell_append=no
++( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
++    >/dev/null 2>&1 \
++  && lt_shell_append=yes
++AC_MSG_RESULT([$lt_shell_append])
++_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
++
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++  lt_unset=unset
++else
++  lt_unset=false
++fi
++_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
++
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++  lt_SP2NL='tr \040 \012'
++  lt_NL2SP='tr \015\012 \040\040'
++  ;;
++ *) # EBCDIC based system
++  lt_SP2NL='tr \100 \n'
++  lt_NL2SP='tr \r\n \100\100'
++  ;;
++esac
++_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
++_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
++])# _LT_CHECK_SHELL_FEATURES
++
++
++# _LT_PROG_XSI_SHELLFNS
++# ---------------------
++# Bourne and XSI compatible variants of some useful shell functions.
++m4_defun([_LT_PROG_XSI_SHELLFNS],
++[case $xsi_shell in
++  yes)
++    cat << \_LT_EOF >> "$cfgfile"
++
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++  case ${1} in
++    */*) func_dirname_result="${1%/*}${2}" ;;
++    *  ) func_dirname_result="${3}" ;;
++  esac
++}
++
++# func_basename file
++func_basename ()
++{
++  func_basename_result="${1##*/}"
++}
++
++# func_dirname_and_basename file append nondir_replacement
++# perform func_basename and func_dirname in a single function
++# call:
++#   dirname:  Compute the dirname of FILE.  If nonempty,
++#             add APPEND to the result, otherwise set result
++#             to NONDIR_REPLACEMENT.
++#             value returned in "$func_dirname_result"
++#   basename: Compute filename of FILE.
++#             value retuned in "$func_basename_result"
++# Implementation must be kept synchronized with func_dirname
++# and func_basename. For efficiency, we do not delegate to
++# those functions but instead duplicate the functionality here.
++func_dirname_and_basename ()
++{
++  case ${1} in
++    */*) func_dirname_result="${1%/*}${2}" ;;
++    *  ) func_dirname_result="${3}" ;;
++  esac
++  func_basename_result="${1##*/}"
++}
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++func_stripname ()
++{
++  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
++  # positional parameters, so assign one to ordinary parameter first.
++  func_stripname_result=${3}
++  func_stripname_result=${func_stripname_result#"${1}"}
++  func_stripname_result=${func_stripname_result%"${2}"}
++}
++
++# func_opt_split
++func_opt_split ()
++{
++  func_opt_split_opt=${1%%=*}
++  func_opt_split_arg=${1#*=}
++}
++
++# func_lo2o object
++func_lo2o ()
++{
++  case ${1} in
++    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
++    *)    func_lo2o_result=${1} ;;
++  esac
++}
++
++# func_xform libobj-or-source
++func_xform ()
++{
++  func_xform_result=${1%.*}.lo
++}
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++  func_arith_result=$(( $[*] ))
++}
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++  func_len_result=${#1}
++}
++
++_LT_EOF
++    ;;
++  *) # Bourne compatible functions.
++    cat << \_LT_EOF >> "$cfgfile"
++
++# func_dirname file append nondir_replacement
++# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
++# otherwise set result to NONDIR_REPLACEMENT.
++func_dirname ()
++{
++  # Extract subdirectory from the argument.
++  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
++  if test "X$func_dirname_result" = "X${1}"; then
++    func_dirname_result="${3}"
++  else
++    func_dirname_result="$func_dirname_result${2}"
++  fi
++}
++
++# func_basename file
++func_basename ()
++{
++  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
++}
++
++dnl func_dirname_and_basename
++dnl A portable version of this function is already defined in general.m4sh
++dnl so there is no need for it here.
++
++# func_stripname prefix suffix name
++# strip PREFIX and SUFFIX off of NAME.
++# PREFIX and SUFFIX must not contain globbing or regex special
++# characters, hashes, percent signs, but SUFFIX may contain a leading
++# dot (in which case that matches only a dot).
++# func_strip_suffix prefix name
++func_stripname ()
++{
++  case ${2} in
++    .*) func_stripname_result=`$ECHO "X${3}" \
++           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
++    *)  func_stripname_result=`$ECHO "X${3}" \
++           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
++  esac
++}
++
++# sed scripts:
++my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
++my_sed_long_arg='1s/^-[[^=]]*=//'
++
++# func_opt_split
++func_opt_split ()
++{
++  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
++  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
++}
++
++# func_lo2o object
++func_lo2o ()
++{
++  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
++}
++
++# func_xform libobj-or-source
++func_xform ()
++{
++  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
++}
++
++# func_arith arithmetic-term...
++func_arith ()
++{
++  func_arith_result=`expr "$[@]"`
++}
++
++# func_len string
++# STRING may not start with a hyphen.
++func_len ()
++{
++  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
++}
++
++_LT_EOF
++esac
++
++case $lt_shell_append in
++  yes)
++    cat << \_LT_EOF >> "$cfgfile"
++
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++  eval "$[1]+=\$[2]"
++}
++_LT_EOF
++    ;;
++  *)
++    cat << \_LT_EOF >> "$cfgfile"
++
++# func_append var value
++# Append VALUE to the end of shell variable VAR.
++func_append ()
++{
++  eval "$[1]=\$$[1]\$[2]"
++}
++
++_LT_EOF
++    ;;
++  esac
++])

diff --cc m4/ltoptions.m4
index 0000000,0000000..34151a3
new file mode 100644 (file)
--- /dev/null
--- /dev/null
+++ b/m4/ltoptions.m4
@@@ -1,0 -1,0 +1,368 @@@
++# Helper functions for option handling.                    -*- Autoconf -*-
++#
++#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++#   Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 6 ltoptions.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
++
++
++# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
++# ------------------------------------------
++m4_define([_LT_MANGLE_OPTION],
++[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
++
++
++# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
++# ---------------------------------------
++# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
++# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
++# saved as a flag.
++m4_define([_LT_SET_OPTION],
++[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
++m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
++        _LT_MANGLE_DEFUN([$1], [$2]),
++    [m4_warning([Unknown $1 option `$2'])])[]dnl
++])
++
++
++# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
++# ------------------------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++m4_define([_LT_IF_OPTION],
++[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
++
++
++# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
++# -------------------------------------------------------
++# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
++# are set.
++m4_define([_LT_UNLESS_OPTIONS],
++[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++          [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
++                    [m4_define([$0_found])])])[]dnl
++m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
++])[]dnl
++])
++
++
++# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
++# ----------------------------------------
++# OPTION-LIST is a space-separated list of Libtool options associated
++# with MACRO-NAME.  If any OPTION has a matching handler declared with
++# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
++# the unknown option and exit.
++m4_defun([_LT_SET_OPTIONS],
++[# Set options
++m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
++    [_LT_SET_OPTION([$1], _LT_Option)])
++
++m4_if([$1],[LT_INIT],[
++  dnl
++  dnl Simply set some default values (i.e off) if boolean options were not
++  dnl specified:
++  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
++  ])
++  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
++  ])
++  dnl
++  dnl If no reference was made to various pairs of opposing options, then
++  dnl we run the default mode handler for the pair.  For example, if neither
++  dnl `shared' nor `disable-shared' was passed, we enable building of shared
++  dnl archives by default:
++  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
++  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
++  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
++  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
++                 [_LT_ENABLE_FAST_INSTALL])
++  ])
++])# _LT_SET_OPTIONS
++
++
++## --------------------------------- ##
++## Macros to handle LT_INIT options. ##
++## --------------------------------- ##
++
++# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
++# -----------------------------------------
++m4_define([_LT_MANGLE_DEFUN],
++[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
++
++
++# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
++# -----------------------------------------------
++m4_define([LT_OPTION_DEFINE],
++[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
++])# LT_OPTION_DEFINE
++
++
++# dlopen
++# ------
++LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
++])
++
++AU_DEFUN([AC_LIBTOOL_DLOPEN],
++[_LT_SET_OPTION([LT_INIT], [dlopen])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `dlopen' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
++
++
++# win32-dll
++# ---------
++# Declare package support for building win32 dll's.
++LT_OPTION_DEFINE([LT_INIT], [win32-dll],
++[enable_win32_dll=yes
++
++case $host in
++*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
++  AC_CHECK_TOOL(AS, as, false)
++  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++  AC_CHECK_TOOL(OBJDUMP, objdump, false)
++  ;;
++esac
++
++test -z "$AS" && AS=as
++_LT_DECL([], [AS],      [0], [Assembler program])dnl
++
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
++
++test -z "$OBJDUMP" && OBJDUMP=objdump
++_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
++])# win32-dll
++
++AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++_LT_SET_OPTION([LT_INIT], [win32-dll])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `win32-dll' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
++
++
++# _LT_ENABLE_SHARED([DEFAULT])
++# ----------------------------
++# implement the --enable-shared flag, and supports the `shared' and
++# `disable-shared' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_SHARED],
++[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([shared],
++    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++      [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_shared=yes ;;
++    no) enable_shared=no ;;
++    *)
++      enable_shared=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_shared=yes
++      fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
++
++    _LT_DECL([build_libtool_libs], [enable_shared], [0],
++      [Whether or not to build shared libraries])
++])# _LT_ENABLE_SHARED
++
++LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
++])
++
++AC_DEFUN([AC_DISABLE_SHARED],
++[_LT_SET_OPTION([LT_INIT], [disable-shared])
++])
++
++AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
++AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_SHARED], [])
++dnl AC_DEFUN([AM_DISABLE_SHARED], [])
++
++
++
++# _LT_ENABLE_STATIC([DEFAULT])
++# ----------------------------
++# implement the --enable-static flag, and support the `static' and
++# `disable-static' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_STATIC],
++[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([static],
++    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++      [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_static=yes ;;
++    no) enable_static=no ;;
++    *)
++     enable_static=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_static=yes
++      fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
++
++    _LT_DECL([build_old_libs], [enable_static], [0],
++      [Whether or not to build static libraries])
++])# _LT_ENABLE_STATIC
++
++LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
++
++# Old names:
++AC_DEFUN([AC_ENABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
++])
++
++AC_DEFUN([AC_DISABLE_STATIC],
++[_LT_SET_OPTION([LT_INIT], [disable-static])
++])
++
++AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
++AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AM_ENABLE_STATIC], [])
++dnl AC_DEFUN([AM_DISABLE_STATIC], [])
++
++
++
++# _LT_ENABLE_FAST_INSTALL([DEFAULT])
++# ----------------------------------
++# implement the --enable-fast-install flag, and support the `fast-install'
++# and `disable-fast-install' LT_INIT options.
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++m4_define([_LT_ENABLE_FAST_INSTALL],
++[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
++AC_ARG_ENABLE([fast-install],
++    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_fast_install=yes ;;
++    no) enable_fast_install=no ;;
++    *)
++      enable_fast_install=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++      IFS="$lt_save_ifs"
++      if test "X$pkg" = "X$p"; then
++        enable_fast_install=yes
++      fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
++
++_LT_DECL([fast_install], [enable_fast_install], [0],
++       [Whether or not to optimize for fast installation])dnl
++])# _LT_ENABLE_FAST_INSTALL
++
++LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
++LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
++
++# Old names:
++AU_DEFUN([AC_ENABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `fast-install' option into LT_INIT's first parameter.])
++])
++
++AU_DEFUN([AC_DISABLE_FAST_INSTALL],
++[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you put
++the `disable-fast-install' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
++dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
++
++
++# _LT_WITH_PIC([MODE])
++# --------------------
++# implement the --with-pic flag, and support the `pic-only' and `no-pic'
++# LT_INIT options.
++# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
++m4_define([_LT_WITH_PIC],
++[AC_ARG_WITH([pic],
++    [AS_HELP_STRING([--with-pic],
++      [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++    [pic_mode="$withval"],
++    [pic_mode=default])
++
++test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
++
++_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
++])# _LT_WITH_PIC
++
++LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
++LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
++
++# Old name:
++AU_DEFUN([AC_LIBTOOL_PICMODE],
++[_LT_SET_OPTION([LT_INIT], [pic-only])
++AC_DIAGNOSE([obsolete],
++[$0: Remove this warning and the call to _LT_SET_OPTION when you
++put the `pic-only' option into LT_INIT's first parameter.])
++])
++
++dnl aclocal-1.4 backwards compatibility:
++dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
++
++## ----------------- ##
++## LTDL_INIT Options ##
++## ----------------- ##
++
++m4_define([_LTDL_MODE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
++               [m4_define([_LTDL_MODE], [nonrecursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [recursive],
++               [m4_define([_LTDL_MODE], [recursive])])
++LT_OPTION_DEFINE([LTDL_INIT], [subproject],
++               [m4_define([_LTDL_MODE], [subproject])])
++
++m4_define([_LTDL_TYPE], [])
++LT_OPTION_DEFINE([LTDL_INIT], [installable],
++               [m4_define([_LTDL_TYPE], [installable])])
++LT_OPTION_DEFINE([LTDL_INIT], [convenience],
++               [m4_define([_LTDL_TYPE], [convenience])])

diff --cc m4/ltsugar.m4
index 0000000,0000000..9000a05
new file mode 100644 (file)
--- /dev/null
--- /dev/null
+++ b/m4/ltsugar.m4
@@@ -1,0 -1,0 +1,123 @@@
++# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
++#
++# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
++# Written by Gary V. Vaughan, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 6 ltsugar.m4
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
++
++
++# lt_join(SEP, ARG1, [ARG2...])
++# -----------------------------
++# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
++# associated separator.
++# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
++# versions in m4sugar had bugs.
++m4_define([lt_join],
++[m4_if([$#], [1], [],
++       [$#], [2], [[$2]],
++       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
++m4_define([_lt_join],
++[m4_if([$#$2], [2], [],
++       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
++
++
++# lt_car(LIST)
++# lt_cdr(LIST)
++# ------------
++# Manipulate m4 lists.
++# These macros are necessary as long as will still need to support
++# Autoconf-2.59 which quotes differently.
++m4_define([lt_car], [[$1]])
++m4_define([lt_cdr],
++[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
++       [$#], 1, [],
++       [m4_dquote(m4_shift($@))])])
++m4_define([lt_unquote], $1)
++
++
++# lt_append(MACRO-NAME, STRING, [SEPARATOR])
++# ------------------------------------------
++# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
++# Note that neither SEPARATOR nor STRING are expanded; they are appended
++# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
++# No SEPARATOR is output if MACRO-NAME was previously undefined (different
++# than defined and empty).
++#
++# This macro is needed until we can rely on Autoconf 2.62, since earlier
++# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
++m4_define([lt_append],
++[m4_define([$1],
++         m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
++
++
++
++# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
++# ----------------------------------------------------------
++# Produce a SEP delimited list of all paired combinations of elements of
++# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
++# has the form PREFIXmINFIXSUFFIXn.
++# Needed until we can rely on m4_combine added in Autoconf 2.62.
++m4_define([lt_combine],
++[m4_if(m4_eval([$# > 3]), [1],
++       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
++[[m4_foreach([_Lt_prefix], [$2],
++           [m4_foreach([_Lt_suffix],
++              ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
++      [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
++
++
++# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
++# -----------------------------------------------------------------------
++# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
++# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
++m4_define([lt_if_append_uniq],
++[m4_ifdef([$1],
++        [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
++               [lt_append([$1], [$2], [$3])$4],
++               [$5])],
++        [lt_append([$1], [$2], [$3])$4])])
++
++
++# lt_dict_add(DICT, KEY, VALUE)
++# -----------------------------
++m4_define([lt_dict_add],
++[m4_define([$1($2)], [$3])])
++
++
++# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
++# --------------------------------------------
++m4_define([lt_dict_add_subkey],
++[m4_define([$1($2:$3)], [$4])])
++
++
++# lt_dict_fetch(DICT, KEY, [SUBKEY])
++# ----------------------------------
++m4_define([lt_dict_fetch],
++[m4_ifval([$3],
++      m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
++    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
++
++
++# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
++# -----------------------------------------------------------------
++m4_define([lt_if_dict_fetch],
++[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
++      [$5],
++    [$6])])
++
++
++# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
++# --------------------------------------------------------------
++m4_define([lt_dict_filter],
++[m4_if([$5], [], [],
++  [lt_join(m4_quote(m4_default([$4], [[, ]])),
++           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
++                    [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
++])

diff --cc m4/ltversion.m4
index 0000000,0000000..f3c5309
new file mode 100644 (file)
--- /dev/null
--- /dev/null
+++ b/m4/ltversion.m4
@@@ -1,0 -1,0 +1,23 @@@
++# ltversion.m4 -- version numbers                     -*- Autoconf -*-
++#
++#   Copyright (C) 2004 Free Software Foundation, Inc.
++#   Written by Scott James Remnant, 2004
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# Generated from ltversion.in.
++
++# serial 3017 ltversion.m4
++# This file is part of GNU Libtool
++
++m4_define([LT_PACKAGE_VERSION], [2.2.6b])
++m4_define([LT_PACKAGE_REVISION], [1.3017])
++
++AC_DEFUN([LTVERSION_VERSION],
++[macro_version='2.2.6b'
++macro_revision='1.3017'
++_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
++_LT_DECL(, macro_revision, 0)
++])

diff --cc m4/lt~obsolete.m4
index 0000000,0000000..637bb20
new file mode 100644 (file)
--- /dev/null
--- /dev/null
+++ b/m4/lt~obsolete.m4
@@@ -1,0 -1,0 +1,92 @@@
++# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
++#
++#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
++#   Written by Scott James Remnant, 2004.
++#
++# This file is free software; the Free Software Foundation gives
++# unlimited permission to copy and/or distribute it, with or without
++# modifications, as long as this notice is preserved.
++
++# serial 4 lt~obsolete.m4
++
++# These exist entirely to fool aclocal when bootstrapping libtool.
++#
++# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
++# which have later been changed to m4_define as they aren't part of the
++# exported API, or moved to Autoconf or Automake where they belong.
++#
++# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
++# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
++# using a macro with the same name in our local m4/libtool.m4 it'll
++# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
++# and doesn't know about Autoconf macros at all.)
++#
++# So we provide this file, which has a silly filename so it's always
++# included after everything else.  This provides aclocal with the
++# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
++# because those macros already exist, or will be overwritten later.
++# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
++#
++# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
++# Yes, that means every name once taken will need to remain here until
++# we give up compatibility with versions before 1.7, at which point
++# we need to keep only those names which we still refer to.
++
++# This is to help aclocal find these macros, as it can't see m4_define.
++AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
++
++m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
++m4_ifndef([AC_PROG_EGREP],            [AC_DEFUN([AC_PROG_EGREP])])
++m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],       [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
++m4_ifndef([_LT_AC_SHELL_INIT],                [AC_DEFUN([_LT_AC_SHELL_INIT])])
++m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],   [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
++m4_ifndef([_LT_PROG_LTMAIN],          [AC_DEFUN([_LT_PROG_LTMAIN])])
++m4_ifndef([_LT_AC_TAGVAR],            [AC_DEFUN([_LT_AC_TAGVAR])])
++m4_ifndef([AC_LTDL_ENABLE_INSTALL],   [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
++m4_ifndef([AC_LTDL_PREOPEN],          [AC_DEFUN([AC_LTDL_PREOPEN])])
++m4_ifndef([_LT_AC_SYS_COMPILER],      [AC_DEFUN([_LT_AC_SYS_COMPILER])])
++m4_ifndef([_LT_AC_LOCK],              [AC_DEFUN([_LT_AC_LOCK])])
++m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],       [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
++m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],   [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
++m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],   [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
++m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
++m4_ifndef([AC_LIBTOOL_OBJDIR],                [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
++m4_ifndef([AC_LTDL_OBJDIR],           [AC_DEFUN([AC_LTDL_OBJDIR])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
++m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
++m4_ifndef([AC_PATH_MAGIC],            [AC_DEFUN([AC_PATH_MAGIC])])
++m4_ifndef([AC_PROG_LD_GNU],           [AC_DEFUN([AC_PROG_LD_GNU])])
++m4_ifndef([AC_PROG_LD_RELOAD_FLAG],   [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
++m4_ifndef([AC_DEPLIBS_CHECK_METHOD],  [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
++m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
++m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
++m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],        [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
++m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],        [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
++m4_ifndef([LT_AC_PROG_EGREP],         [AC_DEFUN([LT_AC_PROG_EGREP])])
++m4_ifndef([LT_AC_PROG_SED],           [AC_DEFUN([LT_AC_PROG_SED])])
++m4_ifndef([_LT_CC_BASENAME],          [AC_DEFUN([_LT_CC_BASENAME])])
++m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
++m4_ifndef([_LT_LINKER_BOILERPLATE],   [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
++m4_ifndef([_AC_PROG_LIBTOOL],         [AC_DEFUN([_AC_PROG_LIBTOOL])])
++m4_ifndef([AC_LIBTOOL_SETUP],         [AC_DEFUN([AC_LIBTOOL_SETUP])])
++m4_ifndef([_LT_AC_CHECK_DLFCN],               [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
++m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],    [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
++m4_ifndef([_LT_AC_TAGCONFIG],         [AC_DEFUN([_LT_AC_TAGCONFIG])])
++m4_ifndef([AC_DISABLE_FAST_INSTALL],  [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
++m4_ifndef([_LT_AC_LANG_CXX],          [AC_DEFUN([_LT_AC_LANG_CXX])])
++m4_ifndef([_LT_AC_LANG_F77],          [AC_DEFUN([_LT_AC_LANG_F77])])
++m4_ifndef([_LT_AC_LANG_GCJ],          [AC_DEFUN([_LT_AC_LANG_GCJ])])
++m4_ifndef([AC_LIBTOOL_RC],            [AC_DEFUN([AC_LIBTOOL_RC])])
++m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
++m4_ifndef([_LT_AC_LANG_C_CONFIG],     [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
++m4_ifndef([_LT_AC_LANG_CXX_CONFIG],   [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
++m4_ifndef([_LT_AC_LANG_F77_CONFIG],   [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],       [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
++m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],   [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
++m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],        [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
++m4_ifndef([_LT_AC_LANG_RC_CONFIG],    [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
++m4_ifndef([AC_LIBTOOL_CONFIG],                [AC_DEFUN([AC_LIBTOOL_CONFIG])])
++m4_ifndef([_LT_AC_FILE_LTDLL_C],      [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])

diff --cc mech_eap/Makefile.in
index 050607a,0000000..245feb5
mode 100644,000000..100644
--- 1/mech_eap/Makefile.in
--- /dev/null
+++ b/mech_eap/Makefile.in
@@@ -1,1402 -1,0 +1,1508 @@@
- @GSSEAP_ENABLE_REAUTH_TRUE@am__append_1 = util_reauth.c
 +# Makefile.in generated by automake 1.11.1 from Makefile.am.
 +# @configure_input@
 +
 +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
 +# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
 +# Inc.
 +# This Makefile.in is free software; the Free Software Foundation
 +# gives unlimited permission to copy and/or distribute it,
 +# with or without modifications, as long as this notice is preserved.
 +
 +# This program is distributed in the hope that it will be useful,
 +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 +# PARTICULAR PURPOSE.
 +
 +@SET_MAKE@
 +
 +
 +VPATH = @srcdir@
 +pkgdatadir = $(datadir)/@PACKAGE@
 +pkgincludedir = $(includedir)/@PACKAGE@
 +pkglibdir = $(libdir)/@PACKAGE@
 +pkglibexecdir = $(libexecdir)/@PACKAGE@
 +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 +install_sh_DATA = $(install_sh) -c -m 644
 +install_sh_PROGRAM = $(install_sh) -c
 +install_sh_SCRIPT = $(install_sh) -c
 +INSTALL_HEADER = $(INSTALL_DATA)
 +transform = $(program_transform_name)
 +NORMAL_INSTALL = :
 +PRE_INSTALL = :
 +POST_INSTALL = :
 +NORMAL_UNINSTALL = :
 +PRE_UNINSTALL = :
 +POST_UNINSTALL = :
 +build_triplet = @build@
 +host_triplet = @host@
- am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
++@TARGET_WINDOWS_TRUE@am__append_1 = -DCONFIG_WIN32_DEFAULTS -DUSE_INTERNAL_CRYPTO
++@TARGET_WINDOWS_FALSE@am__append_2 = -DEAP_TLS -DEAP_PEAP -DEAP_TTLS -DEAP_MD5 -DEAP_MSCHAPv2 -DEAP_GTC -DEAP_OTP -DEAP_LEAP -DEAP_PSK -DEAP_PAX -DEAP_SAKE -DEAP_GPSK -DEAP_GPSK_SHA256 -DEAP_SERVER_IDENTITY -DEAP_SERVER_TLS -DEAP_SERVER_PEAP -DEAP_SERVER_TTLS -DEAP_SERVER_MD5 -DEAP_SERVER_MSCHAPV2 -DEAP_SERVER_GTC -DEAP_SERVER_PSK -DEAP_SERVER_PAX -DEAP_SERVER_SAKE -DEAP_SERVER_GPSK -DEAP_SERVER_GPSK_SHA256 -DIEEE8021X_EAPOL
++@TARGET_WINDOWS_TRUE@am__append_3 = -debug
++@LIBMOONSHOT_TRUE@am__append_4 = util_moonshot.c
++@LIBMOONSHOT_TRUE@am__append_5 = @LIBMOONSHOT_CFLAGS@
++@LIBMOONSHOT_TRUE@am__append_6 = @LIBMOONSHOT_LDFLAGS@
++@LIBMOONSHOT_TRUE@am__append_7 = @LIBMOONSHOT_LIBS@
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@am__append_8 = \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ accept_sec_context.c                    \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ delete_name_attribute.c                 \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ export_name_composite.c                 \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ get_name_attribute.c                    \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ inquire_name.c                          \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ map_name_to_any.c                       \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ release_any_name_mapping.c              \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ set_name_attribute.c                    \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ util_attr.cpp                           \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ util_base64.c                           \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ util_json.cpp                           \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ util_radius.cpp
++
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@@OPENSAML_TRUE@am__append_9 = util_saml.cpp
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@@SHIBRESOLVER_TRUE@am__append_10 = util_shib.cpp
++@GSSEAP_ENABLE_REAUTH_TRUE@am__append_11 = util_reauth.c
 +subdir = mech_eap
 +DIST_COMMON = README $(gssinclude_HEADERS) $(srcdir)/Makefile.am \
 +      $(srcdir)/Makefile.in AUTHORS COPYING NEWS TODO config.guess \
 +      config.sub install-sh
 +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- mech_eap_la_DEPENDENCIES = ../libeap/libeap.la
- am__mech_eap_la_SOURCES_DIST = accept_sec_context.c acquire_cred.c \
++am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
++      $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
++      $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
++      $(top_srcdir)/m4/minuso.m4 $(top_srcdir)/acinclude.m4 \
 +      $(top_srcdir)/configure.ac
 +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 +      $(ACLOCAL_M4)
 +mkinstalldirs = $(install_sh) -d
 +CONFIG_HEADER = $(top_builddir)/config.h
 +CONFIG_CLEAN_FILES =
 +CONFIG_CLEAN_VPATH_FILES =
 +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 +am__vpath_adj = case $$p in \
 +    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 +    *) f=$$p;; \
 +  esac;
 +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 +am__install_max = 40
 +am__nobase_strip_setup = \
 +  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 +am__nobase_strip = \
 +  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 +am__nobase_list = $(am__nobase_strip_setup); \
 +  for p in $$list; do echo "$$p $$p"; done | \
 +  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 +  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 +    if (++n[$$2] == $(am__install_max)) \
 +      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 +    END { for (dir in files) print dir, files[dir] }'
 +am__base_list = \
 +  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 +  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 +am__installdirs = "$(DESTDIR)$(gssdir)" "$(DESTDIR)$(krb5pluginsdir)" \
 +      "$(DESTDIR)$(gssincludedir)"
 +LTLIBRARIES = $(gss_LTLIBRARIES) $(krb5plugins_LTLIBRARIES)
-       delete_name_attribute.c delete_sec_context.c display_name.c \
-       display_name_ext.c display_status.c duplicate_name.c \
-       eap_mech.c export_name.c export_name_composite.c \
-       export_sec_context.c get_mic.c get_name_attribute.c \
-       gsseap_err.c import_name.c import_sec_context.c \
++am__DEPENDENCIES_1 =
++am__mech_eap_la_SOURCES_DIST = acquire_cred.c \
 +      acquire_cred_with_password.c add_cred.c \
 +      add_cred_with_password.c authorize_localname.c \
 +      canonicalize_name.c compare_name.c context_time.c \
-       inquire_mechs_for_name.c inquire_name.c \
-       inquire_names_for_mech.c inquire_saslname_for_mech.c \
-       inquire_sec_context_by_oid.c map_name_to_any.c \
-       process_context_token.c pseudo_random.c radsec_err.c \
-       release_any_name_mapping.c release_cred.c release_name.c \
-       release_oid.c set_name_attribute.c set_cred_option.c \
-       set_sec_context_option.c store_cred.c unwrap.c unwrap_iov.c \
-       util_attr.cpp util_base64.c util_buffer.c util_context.c \
-       util_cksum.c util_cred.c util_crypt.c util_json.cpp util_krb.c \
-       util_lucid.c util_mech.c util_name.c util_oid.c \
-       util_ordering.c util_radius.cpp util_saml.cpp util_shib.cpp \
-       util_sm.c util_token.c verify_mic.c wrap.c wrap_iov.c \
-       wrap_iov_length.c wrap_size_limit.c util_reauth.c
- @GSSEAP_ENABLE_REAUTH_TRUE@am__objects_1 = mech_eap_la-util_reauth.lo
- am_mech_eap_la_OBJECTS = mech_eap_la-accept_sec_context.lo \
-       mech_eap_la-acquire_cred.lo \
++      delete_sec_context.c display_name.c display_name_ext.c \
++      display_status.c duplicate_name.c eap_mech.c \
++      exchange_meta_data.c export_name.c export_sec_context.c \
++      get_mic.c gsseap_err.c import_name.c import_sec_context.c \
 +      indicate_mechs.c init_sec_context.c inquire_attrs_for_mech.c \
 +      inquire_context.c inquire_cred.c inquire_cred_by_mech.c \
 +      inquire_cred_by_oid.c inquire_mech_for_saslname.c \
-       mech_eap_la-context_time.lo \
-       mech_eap_la-delete_name_attribute.lo \
-       mech_eap_la-delete_sec_context.lo mech_eap_la-display_name.lo \
-       mech_eap_la-display_name_ext.lo mech_eap_la-display_status.lo \
-       mech_eap_la-duplicate_name.lo mech_eap_la-eap_mech.lo \
-       mech_eap_la-export_name.lo \
-       mech_eap_la-export_name_composite.lo \
-       mech_eap_la-export_sec_context.lo mech_eap_la-get_mic.lo \
-       mech_eap_la-get_name_attribute.lo mech_eap_la-gsseap_err.lo \
++      inquire_mechs_for_name.c inquire_names_for_mech.c \
++      inquire_saslname_for_mech.c inquire_sec_context_by_oid.c \
++      process_context_token.c pseudo_random.c query_mechanism_info.c \
++      query_meta_data.c radsec_err.c release_cred.c release_name.c \
++      release_oid.c set_cred_option.c set_sec_context_option.c \
++      store_cred.c unwrap.c unwrap_iov.c util_buffer.c \
++      util_context.c util_cksum.c util_cred.c util_crypt.c \
++      util_krb.c util_lucid.c util_mech.c util_name.c util_oid.c \
++      util_ordering.c util_sm.c util_tld.c util_token.c verify_mic.c \
++      wrap.c wrap_iov.c wrap_iov_length.c wrap_size_limit.c \
++      gssapiP_eap.h util_attr.h util_base64.h util.h util_json.h \
++      util_radius.h util_reauth.h util_saml.h util_shib.h \
++      util_moonshot.c accept_sec_context.c delete_name_attribute.c \
++      export_name_composite.c get_name_attribute.c inquire_name.c \
++      map_name_to_any.c release_any_name_mapping.c \
++      set_name_attribute.c util_attr.cpp util_base64.c util_json.cpp \
++      util_radius.cpp util_saml.cpp util_shib.cpp util_reauth.c
++@LIBMOONSHOT_TRUE@am__objects_1 = mech_eap_la-util_moonshot.lo
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@am__objects_2 = mech_eap_la-accept_sec_context.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-delete_name_attribute.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-export_name_composite.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-get_name_attribute.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-inquire_name.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-map_name_to_any.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-release_any_name_mapping.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-set_name_attribute.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-util_attr.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-util_base64.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-util_json.lo \
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@ mech_eap_la-util_radius.lo
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@@OPENSAML_TRUE@am__objects_3 = mech_eap_la-util_saml.lo
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@@SHIBRESOLVER_TRUE@am__objects_4 = mech_eap_la-util_shib.lo
++@GSSEAP_ENABLE_REAUTH_TRUE@am__objects_5 = mech_eap_la-util_reauth.lo
++am_mech_eap_la_OBJECTS = mech_eap_la-acquire_cred.lo \
 +      mech_eap_la-acquire_cred_with_password.lo \
 +      mech_eap_la-add_cred.lo mech_eap_la-add_cred_with_password.lo \
 +      mech_eap_la-authorize_localname.lo \
 +      mech_eap_la-canonicalize_name.lo mech_eap_la-compare_name.lo \
-       mech_eap_la-inquire_name.lo \
++      mech_eap_la-context_time.lo mech_eap_la-delete_sec_context.lo \
++      mech_eap_la-display_name.lo mech_eap_la-display_name_ext.lo \
++      mech_eap_la-display_status.lo mech_eap_la-duplicate_name.lo \
++      mech_eap_la-eap_mech.lo mech_eap_la-exchange_meta_data.lo \
++      mech_eap_la-export_name.lo mech_eap_la-export_sec_context.lo \
++      mech_eap_la-get_mic.lo mech_eap_la-gsseap_err.lo \
 +      mech_eap_la-import_name.lo mech_eap_la-import_sec_context.lo \
 +      mech_eap_la-indicate_mechs.lo mech_eap_la-init_sec_context.lo \
 +      mech_eap_la-inquire_attrs_for_mech.lo \
 +      mech_eap_la-inquire_context.lo mech_eap_la-inquire_cred.lo \
 +      mech_eap_la-inquire_cred_by_mech.lo \
 +      mech_eap_la-inquire_cred_by_oid.lo \
 +      mech_eap_la-inquire_mech_for_saslname.lo \
 +      mech_eap_la-inquire_mechs_for_name.lo \
-       mech_eap_la-map_name_to_any.lo \
 +      mech_eap_la-inquire_names_for_mech.lo \
 +      mech_eap_la-inquire_saslname_for_mech.lo \
 +      mech_eap_la-inquire_sec_context_by_oid.lo \
-       mech_eap_la-pseudo_random.lo mech_eap_la-radsec_err.lo \
-       mech_eap_la-release_any_name_mapping.lo \
 +      mech_eap_la-process_context_token.lo \
-       mech_eap_la-release_oid.lo mech_eap_la-set_name_attribute.lo \
-       mech_eap_la-set_cred_option.lo \
++      mech_eap_la-pseudo_random.lo \
++      mech_eap_la-query_mechanism_info.lo \
++      mech_eap_la-query_meta_data.lo mech_eap_la-radsec_err.lo \
 +      mech_eap_la-release_cred.lo mech_eap_la-release_name.lo \
-       mech_eap_la-unwrap_iov.lo mech_eap_la-util_attr.lo \
-       mech_eap_la-util_base64.lo mech_eap_la-util_buffer.lo \
++      mech_eap_la-release_oid.lo mech_eap_la-set_cred_option.lo \
 +      mech_eap_la-set_sec_context_option.lo \
 +      mech_eap_la-store_cred.lo mech_eap_la-unwrap.lo \
-       mech_eap_la-util_json.lo mech_eap_la-util_krb.lo \
-       mech_eap_la-util_lucid.lo mech_eap_la-util_mech.lo \
-       mech_eap_la-util_name.lo mech_eap_la-util_oid.lo \
-       mech_eap_la-util_ordering.lo mech_eap_la-util_radius.lo \
-       mech_eap_la-util_saml.lo mech_eap_la-util_shib.lo \
-       mech_eap_la-util_sm.lo mech_eap_la-util_token.lo \
-       mech_eap_la-verify_mic.lo mech_eap_la-wrap.lo \
-       mech_eap_la-wrap_iov.lo mech_eap_la-wrap_iov_length.lo \
-       mech_eap_la-wrap_size_limit.lo $(am__objects_1)
++      mech_eap_la-unwrap_iov.lo mech_eap_la-util_buffer.lo \
 +      mech_eap_la-util_context.lo mech_eap_la-util_cksum.lo \
 +      mech_eap_la-util_cred.lo mech_eap_la-util_crypt.lo \
- am__radius_ad_la_SOURCES_DIST = util_adshim.c
++      mech_eap_la-util_krb.lo mech_eap_la-util_lucid.lo \
++      mech_eap_la-util_mech.lo mech_eap_la-util_name.lo \
++      mech_eap_la-util_oid.lo mech_eap_la-util_ordering.lo \
++      mech_eap_la-util_sm.lo mech_eap_la-util_tld.lo \
++      mech_eap_la-util_token.lo mech_eap_la-verify_mic.lo \
++      mech_eap_la-wrap.lo mech_eap_la-wrap_iov.lo \
++      mech_eap_la-wrap_iov_length.lo mech_eap_la-wrap_size_limit.lo \
++      $(am__objects_1) $(am__objects_2) $(am__objects_3) \
++      $(am__objects_4) $(am__objects_5)
 +mech_eap_la_OBJECTS = $(am_mech_eap_la_OBJECTS)
 +mech_eap_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
 +      $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(mech_eap_la_CXXFLAGS) \
 +      $(CXXFLAGS) $(mech_eap_la_LDFLAGS) $(LDFLAGS) -o $@
 +radius_ad_la_DEPENDENCIES =
- depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__radius_ad_la_SOURCES_DIST = util_adshim.c authdata_plugin.h
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@am_radius_ad_la_OBJECTS = radius_ad_la-util_adshim.lo
 +radius_ad_la_OBJECTS = $(am_radius_ad_la_OBJECTS)
 +radius_ad_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 +      $(LIBTOOLFLAGS) --mode=link $(CCLD) $(radius_ad_la_CFLAGS) \
 +      $(CFLAGS) $(radius_ad_la_LDFLAGS) $(LDFLAGS) -o $@
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@am_radius_ad_la_rpath =  \
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@    -rpath \
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@    $(krb5pluginsdir)
 +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
- EAP_CFLAGS = -I$(srcdir)/../libeap/src -I$(srcdir)/../libeap/src/common -I$(srcdir)/../libeap/src/eap_common  \
-       -I$(srcdir)/../libeap/src/utils \
-       -DEAP_TLS -DEAP_PEAP -DEAP_TTLS -DEAP_MD5 -DEAP_MSCHAPv2 -DEAP_GTC -DEAP_OTP -DEAP_LEAP -DEAP_PSK -DEAP_PAX -DEAP_SAKE -DEAP_GPSK -DEAP_GPSK_SHA256 -DEAP_SERVER_IDENTITY -DEAP_SERVER_TLS -DEAP_SERVER_PEAP -DEAP_SERVER_TTLS -DEAP_SERVER_MD5 -DEAP_SERVER_MSCHAPV2 -DEAP_SERVER_GTC -DEAP_SERVER_PSK -DEAP_SERVER_PAX -DEAP_SERVER_SAKE -DEAP_SERVER_GPSK -DEAP_SERVER_GPSK_SHA256 -DIEEE8021X_EAPOL
- 
++depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
 +am__depfiles_maybe = depfiles
 +am__mv = mv -f
 +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 +      $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 +      $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 +CCLD = $(CC)
 +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 +      $(LDFLAGS) -o $@
 +CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 +      $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 +LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 +      $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 +CXXLD = $(CXX)
 +CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 +      --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
 +      $(LDFLAGS) -o $@
 +SOURCES = $(mech_eap_la_SOURCES) $(radius_ad_la_SOURCES)
 +DIST_SOURCES = $(am__mech_eap_la_SOURCES_DIST) \
 +      $(am__radius_ad_la_SOURCES_DIST)
 +HEADERS = $(gssinclude_HEADERS)
 +ETAGS = etags
 +CTAGS = ctags
 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 +ACLOCAL = @ACLOCAL@
 +AMTAR = @AMTAR@
 +AR = @AR@
++AS = @AS@
 +AUTOCONF = @AUTOCONF@
 +AUTOHEADER = @AUTOHEADER@
 +AUTOMAKE = @AUTOMAKE@
 +AWK = @AWK@
 +CC = @CC@
 +CCDEPMODE = @CCDEPMODE@
 +CFLAGS = @CFLAGS@
 +COMPILE_ET = @COMPILE_ET@
 +CPP = @CPP@
 +CPPFLAGS = @CPPFLAGS@
 +CXX = @CXX@
 +CXXCPP = @CXXCPP@
 +CXXDEPMODE = @CXXDEPMODE@
 +CXXFLAGS = @CXXFLAGS@
 +CYGPATH_W = @CYGPATH_W@
 +DEFS = @DEFS@
 +DEPDIR = @DEPDIR@
++DLLTOOL = @DLLTOOL@
 +DSYMUTIL = @DSYMUTIL@
 +DUMPBIN = @DUMPBIN@
 +ECHO_C = @ECHO_C@
 +ECHO_N = @ECHO_N@
 +ECHO_T = @ECHO_T@
 +EGREP = @EGREP@
 +EXEEXT = @EXEEXT@
 +FGREP = @FGREP@
 +GREP = @GREP@
 +INSTALL = @INSTALL@
 +INSTALL_DATA = @INSTALL_DATA@
 +INSTALL_PROGRAM = @INSTALL_PROGRAM@
 +INSTALL_SCRIPT = @INSTALL_SCRIPT@
 +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 +JANSSON_CFLAGS = @JANSSON_CFLAGS@
 +JANSSON_LDFLAGS = @JANSSON_LDFLAGS@
 +JANSSON_LIBS = @JANSSON_LIBS@
 +KRB5_CFLAGS = @KRB5_CFLAGS@
++KRB5_LDFLAGS = @KRB5_LDFLAGS@
 +KRB5_LIBS = @KRB5_LIBS@
 +LD = @LD@
 +LDFLAGS = @LDFLAGS@
++LIBMOONSHOT_CFLAGS = @LIBMOONSHOT_CFLAGS@
++LIBMOONSHOT_LDFLAGS = @LIBMOONSHOT_LDFLAGS@
++LIBMOONSHOT_LIBS = @LIBMOONSHOT_LIBS@
 +LIBOBJS = @LIBOBJS@
 +LIBS = @LIBS@
 +LIBTOOL = @LIBTOOL@
 +LIPO = @LIPO@
 +LN_S = @LN_S@
 +LTLIBOBJS = @LTLIBOBJS@
++MAINT = @MAINT@
 +MAKEINFO = @MAKEINFO@
 +MKDIR_P = @MKDIR_P@
 +NM = @NM@
 +NMEDIT = @NMEDIT@
 +OBJDUMP = @OBJDUMP@
 +OBJEXT = @OBJEXT@
++OPENSAML_CXXFLAGS = @OPENSAML_CXXFLAGS@
++OPENSAML_LDFLAGS = @OPENSAML_LDFLAGS@
++OPENSAML_LIBS = @OPENSAML_LIBS@
 +OTOOL = @OTOOL@
 +OTOOL64 = @OTOOL64@
 +PACKAGE = @PACKAGE@
 +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 +PACKAGE_NAME = @PACKAGE_NAME@
 +PACKAGE_STRING = @PACKAGE_STRING@
 +PACKAGE_TARNAME = @PACKAGE_TARNAME@
 +PACKAGE_URL = @PACKAGE_URL@
 +PACKAGE_VERSION = @PACKAGE_VERSION@
 +PATH_SEPARATOR = @PATH_SEPARATOR@
 +RADSEC_CFLAGS = @RADSEC_CFLAGS@
 +RADSEC_LDFLAGS = @RADSEC_LDFLAGS@
 +RADSEC_LIBS = @RADSEC_LIBS@
 +RANLIB = @RANLIB@
 +SED = @SED@
 +SET_MAKE = @SET_MAKE@
 +SHELL = @SHELL@
 +SHIBRESOLVER_CXXFLAGS = @SHIBRESOLVER_CXXFLAGS@
 +SHIBRESOLVER_LDFLAGS = @SHIBRESOLVER_LDFLAGS@
 +SHIBRESOLVER_LIBS = @SHIBRESOLVER_LIBS@
 +SHIBSP_CXXFLAGS = @SHIBSP_CXXFLAGS@
 +SHIBSP_LDFLAGS = @SHIBSP_LDFLAGS@
 +SHIBSP_LIBS = @SHIBSP_LIBS@
 +STRIP = @STRIP@
 +TARGET_CFLAGS = @TARGET_CFLAGS@
 +TARGET_LDFLAGS = @TARGET_LDFLAGS@
 +VERSION = @VERSION@
 +abs_builddir = @abs_builddir@
 +abs_srcdir = @abs_srcdir@
 +abs_top_builddir = @abs_top_builddir@
 +abs_top_srcdir = @abs_top_srcdir@
 +ac_ct_CC = @ac_ct_CC@
 +ac_ct_CXX = @ac_ct_CXX@
 +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 +am__include = @am__include@
 +am__leading_dot = @am__leading_dot@
 +am__quote = @am__quote@
 +am__tar = @am__tar@
 +am__untar = @am__untar@
 +bindir = @bindir@
 +build = @build@
 +build_alias = @build_alias@
 +build_cpu = @build_cpu@
 +build_os = @build_os@
 +build_vendor = @build_vendor@
 +builddir = @builddir@
 +datadir = @datadir@
 +datarootdir = @datarootdir@
 +docdir = @docdir@
 +dvidir = @dvidir@
 +exec_prefix = @exec_prefix@
 +host = @host@
 +host_alias = @host_alias@
 +host_cpu = @host_cpu@
 +host_os = @host_os@
 +host_vendor = @host_vendor@
 +htmldir = @htmldir@
 +includedir = @includedir@
 +infodir = @infodir@
 +install_sh = @install_sh@
 +libdir = @libdir@
 +libexecdir = @libexecdir@
 +localedir = @localedir@
 +localstatedir = @localstatedir@
 +lt_ECHO = @lt_ECHO@
 +mandir = @mandir@
 +mkdir_p = @mkdir_p@
 +oldincludedir = @oldincludedir@
 +pdfdir = @pdfdir@
 +prefix = @prefix@
 +program_transform_name = @program_transform_name@
 +psdir = @psdir@
 +sbindir = @sbindir@
 +sharedstatedir = @sharedstatedir@
 +srcdir = @srcdir@
 +sysconfdir = @sysconfdir@
 +target_alias = @target_alias@
 +top_build_prefix = @top_build_prefix@
 +top_builddir = @top_builddir@
 +top_srcdir = @top_srcdir@
 +AUTOMAKE_OPTIONS = foreign
++EXTRA_DIST = gsseap_err.et radsec_err.et \
++      mech_eap.exports mech_eap-noacceptor.exports  radius_ad.exports \
++      LICENSE AUTHORS
++
 +gssincludedir = $(includedir)/gssapi
 +gssinclude_HEADERS = gssapi_eap.h
- mech_eap_la_CFLAGS = -Werror -Wall -Wunused-parameter \
-                       @KRB5_CFLAGS@  @RADSEC_CFLAGS@ @TARGET_CFLAGS@ $(EAP_CFLAGS)
- 
- mech_eap_la_CXXFLAGS = -Werror -Wall -Wunused-parameter \
-                       @KRB5_CFLAGS@  @RADSEC_CFLAGS@ \
-                       @SHIBRESOLVER_CXXFLAGS@ @SHIBSP_CXXFLAGS@ @TARGET_CFLAGS@ $(EAP_CFLAGS)
- 
- mech_eap_la_LDFLAGS = -avoid-version -module \
-                       -export-symbols mech_eap.exports -no-undefined \
-                       @RADSEC_LDFLAGS@ @TARGET_LDFLAGS@
- 
++EAP_CFLAGS = -I$(srcdir)/../libeap/src \
++      -I$(srcdir)/../libeap/src/common \
++      -I$(srcdir)/../libeap/src/eap_common \
++      -I$(srcdir)/../libeap/src/utils $(am__append_1) \
++      $(am__append_2)
++@GSSEAP_ENABLE_ACCEPTOR_FALSE@GSSEAP_EXPORTS = mech_eap-noacceptor.exports
++@GSSEAP_ENABLE_ACCEPTOR_TRUE@GSSEAP_EXPORTS = mech_eap.exports
 +gssdir = $(libdir)/gss
 +gss_LTLIBRARIES = mech_eap.la
++@TARGET_WINDOWS_FALSE@OS_LIBS = 
++@TARGET_WINDOWS_TRUE@OS_LIBS = -lshell32 -ladvapi32 -lws2_32 -lcomerr32
++@TARGET_WINDOWS_FALSE@mech_eap_la_CFLAGS = -Werror -Wall \
++@TARGET_WINDOWS_FALSE@        -Wunused-parameter @KRB5_CFLAGS@ \
++@TARGET_WINDOWS_FALSE@        @RADSEC_CFLAGS@ @TARGET_CFLAGS@ \
++@TARGET_WINDOWS_FALSE@        $(EAP_CFLAGS) $(am__append_5)
++@TARGET_WINDOWS_TRUE@mech_eap_la_CFLAGS = -Zi @KRB5_CFLAGS@ \
++@TARGET_WINDOWS_TRUE@ @RADSEC_CFLAGS@ @TARGET_CFLAGS@ \
++@TARGET_WINDOWS_TRUE@ $(EAP_CFLAGS) $(am__append_5)
++@TARGET_WINDOWS_FALSE@mech_eap_la_CXXFLAGS = -Werror -Wall \
++@TARGET_WINDOWS_FALSE@        -Wunused-parameter @KRB5_CFLAGS@ \
++@TARGET_WINDOWS_FALSE@        @RADSEC_CFLAGS@ @OPENSAML_CXXFLAGS@ \
++@TARGET_WINDOWS_FALSE@        @SHIBRESOLVER_CXXFLAGS@ \
++@TARGET_WINDOWS_FALSE@        @SHIBSP_CXXFLAGS@ @TARGET_CFLAGS@ \
++@TARGET_WINDOWS_FALSE@        $(EAP_CFLAGS)
++@TARGET_WINDOWS_TRUE@mech_eap_la_CXXFLAGS = -Zi @KRB5_CFLAGS@ \
++@TARGET_WINDOWS_TRUE@ @RADSEC_CFLAGS@ @OPENSAML_CXXFLAGS@ \
++@TARGET_WINDOWS_TRUE@ @SHIBRESOLVER_CXXFLAGS@ @SHIBSP_CXXFLAGS@ \
++@TARGET_WINDOWS_TRUE@ @TARGET_CFLAGS@ $(EAP_CFLAGS)
++mech_eap_la_DEPENDENCIES = $(GSSEAP_EXPORTS)
 +mech_eap_la_CPPFLAGS = -DBUILD_GSSEAP_LIB -DSYSCONFDIR=\"${sysconfdir}\" -DDATAROOTDIR=\"${datarootdir}\"
-                      @SHIBRESOLVER_LIBS@ @SHIBSP_LIBS@ @JANSSON_LIBS@
- 
- mech_eap_la_SOURCES = accept_sec_context.c acquire_cred.c \
-       acquire_cred_with_password.c add_cred.c \
-       add_cred_with_password.c authorize_localname.c \
++mech_eap_la_LDFLAGS = -avoid-version -module -export-symbols \
++      $(GSSEAP_EXPORTS) -no-undefined @KRB5_LDFLAGS@ \
++      @RADSEC_LDFLAGS@ @TARGET_LDFLAGS@ $(am__append_3) \
++      $(am__append_6)
 +mech_eap_la_LIBADD = @KRB5_LIBS@ ../libeap/libeap.la @RADSEC_LIBS@ \
-       delete_name_attribute.c delete_sec_context.c display_name.c \
-       display_name_ext.c display_status.c duplicate_name.c \
-       eap_mech.c export_name.c export_name_composite.c \
-       export_sec_context.c get_mic.c get_name_attribute.c \
-       gsseap_err.c import_name.c import_sec_context.c \
++      @OPENSAML_LIBS@ @SHIBRESOLVER_LIBS@ @SHIBSP_LIBS@ \
++      @JANSSON_LIBS@ $(am__append_7)
++mech_eap_la_SOURCES = acquire_cred.c acquire_cred_with_password.c \
++      add_cred.c add_cred_with_password.c authorize_localname.c \
 +      canonicalize_name.c compare_name.c context_time.c \
-       inquire_mechs_for_name.c inquire_name.c \
-       inquire_names_for_mech.c inquire_saslname_for_mech.c \
-       inquire_sec_context_by_oid.c map_name_to_any.c \
-       process_context_token.c pseudo_random.c radsec_err.c \
-       release_any_name_mapping.c release_cred.c release_name.c \
-       release_oid.c set_name_attribute.c set_cred_option.c \
-       set_sec_context_option.c store_cred.c unwrap.c unwrap_iov.c \
-       util_attr.cpp util_base64.c util_buffer.c util_context.c \
-       util_cksum.c util_cred.c util_crypt.c util_json.cpp util_krb.c \
-       util_lucid.c util_mech.c util_name.c util_oid.c \
-       util_ordering.c util_radius.cpp util_saml.cpp util_shib.cpp \
-       util_sm.c util_token.c verify_mic.c wrap.c wrap_iov.c \
-       wrap_iov_length.c wrap_size_limit.c $(am__append_1)
- BUILT_SOURCES = gsseap_err.c radsec_err.c
++      delete_sec_context.c display_name.c display_name_ext.c \
++      display_status.c duplicate_name.c eap_mech.c \
++      exchange_meta_data.c export_name.c export_sec_context.c \
++      get_mic.c gsseap_err.c import_name.c import_sec_context.c \
 +      indicate_mechs.c init_sec_context.c inquire_attrs_for_mech.c \
 +      inquire_context.c inquire_cred.c inquire_cred_by_mech.c \
 +      inquire_cred_by_oid.c inquire_mech_for_saslname.c \
- @GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@radius_ad_la_SOURCES = util_adshim.c
++      inquire_mechs_for_name.c inquire_names_for_mech.c \
++      inquire_saslname_for_mech.c inquire_sec_context_by_oid.c \
++      process_context_token.c pseudo_random.c query_mechanism_info.c \
++      query_meta_data.c radsec_err.c release_cred.c release_name.c \
++      release_oid.c set_cred_option.c set_sec_context_option.c \
++      store_cred.c unwrap.c unwrap_iov.c util_buffer.c \
++      util_context.c util_cksum.c util_cred.c util_crypt.c \
++      util_krb.c util_lucid.c util_mech.c util_name.c util_oid.c \
++      util_ordering.c util_sm.c util_tld.c util_token.c verify_mic.c \
++      wrap.c wrap_iov.c wrap_iov_length.c wrap_size_limit.c \
++      gssapiP_eap.h util_attr.h util_base64.h util.h util_json.h \
++      util_radius.h util_reauth.h util_saml.h util_shib.h \
++      $(am__append_4) $(am__append_8) $(am__append_9) \
++      $(am__append_10) $(am__append_11)
++BUILT_SOURCES = gsseap_err.c radsec_err.c gsseap_err.h radsec_err.h
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@krb5pluginsdir = $(libdir)/krb5/plugins/authdata
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@krb5plugins_LTLIBRARIES = radius_ad.la
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@radius_ad_la_CFLAGS = -Werror -Wall -Wunused-parameter \
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@                    @KRB5_CFLAGS@ $(EAP_CFLAGS) @RADSEC_CFLAGS@ @TARGET_CFLAGS@
 +
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@radius_ad_la_LDFLAGS = -avoid-version -module \
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@                   -export-symbols radius_ad.exports -no-undefined
 +
 +@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@radius_ad_la_LIBADD = @KRB5_LIBS@
- $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
++@GSSEAP_ENABLE_REAUTH_TRUE@@HEIMDAL_FALSE@radius_ad_la_SOURCES = util_adshim.c authdata_plugin.h
 +all: $(BUILT_SOURCES)
 +      $(MAKE) $(AM_MAKEFLAGS) all-am
 +
 +.SUFFIXES:
 +.SUFFIXES: .c .cpp .lo .o .obj
- $(top_srcdir)/configure:  $(am__configure_deps)
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 +      @for dep in $?; do \
 +        case '$(am__configure_deps)' in \
 +          *$$dep*) \
 +            ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 +              && { if test -f $@; then exit 0; else break; fi; }; \
 +            exit 1;; \
 +        esac; \
 +      done; \
 +      echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign mech_eap/Makefile'; \
 +      $(am__cd) $(top_srcdir) && \
 +        $(AUTOMAKE) --foreign mech_eap/Makefile
 +.PRECIOUS: Makefile
 +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 +      @case '$?' in \
 +        *config.status*) \
 +          cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 +        *) \
 +          echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 +          cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 +      esac;
 +
 +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +
- $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
- mech_eap_la-accept_sec_context.lo: accept_sec_context.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-accept_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-accept_sec_context.Tpo -c -o mech_eap_la-accept_sec_context.lo `test -f 'accept_sec_context.c' || echo '$(srcdir)/'`accept_sec_context.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-accept_sec_context.Tpo $(DEPDIR)/mech_eap_la-accept_sec_context.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='accept_sec_context.c' object='mech_eap_la-accept_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-accept_sec_context.lo `test -f 'accept_sec_context.c' || echo '$(srcdir)/'`accept_sec_context.c
- 
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 +      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 +$(am__aclocal_m4_deps):
 +install-gssLTLIBRARIES: $(gss_LTLIBRARIES)
 +      @$(NORMAL_INSTALL)
 +      test -z "$(gssdir)" || $(MKDIR_P) "$(DESTDIR)$(gssdir)"
 +      @list='$(gss_LTLIBRARIES)'; test -n "$(gssdir)" || list=; \
 +      list2=; for p in $$list; do \
 +        if test -f $$p; then \
 +          list2="$$list2 $$p"; \
 +        else :; fi; \
 +      done; \
 +      test -z "$$list2" || { \
 +        echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(gssdir)'"; \
 +        $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(gssdir)"; \
 +      }
 +
 +uninstall-gssLTLIBRARIES:
 +      @$(NORMAL_UNINSTALL)
 +      @list='$(gss_LTLIBRARIES)'; test -n "$(gssdir)" || list=; \
 +      for p in $$list; do \
 +        $(am__strip_dir) \
 +        echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(gssdir)/$$f'"; \
 +        $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(gssdir)/$$f"; \
 +      done
 +
 +clean-gssLTLIBRARIES:
 +      -test -z "$(gss_LTLIBRARIES)" || rm -f $(gss_LTLIBRARIES)
 +      @list='$(gss_LTLIBRARIES)'; for p in $$list; do \
 +        dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 +        test "$$dir" != "$$p" || dir=.; \
 +        echo "rm -f \"$${dir}/so_locations\""; \
 +        rm -f "$${dir}/so_locations"; \
 +      done
 +install-krb5pluginsLTLIBRARIES: $(krb5plugins_LTLIBRARIES)
 +      @$(NORMAL_INSTALL)
 +      test -z "$(krb5pluginsdir)" || $(MKDIR_P) "$(DESTDIR)$(krb5pluginsdir)"
 +      @list='$(krb5plugins_LTLIBRARIES)'; test -n "$(krb5pluginsdir)" || list=; \
 +      list2=; for p in $$list; do \
 +        if test -f $$p; then \
 +          list2="$$list2 $$p"; \
 +        else :; fi; \
 +      done; \
 +      test -z "$$list2" || { \
 +        echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(krb5pluginsdir)'"; \
 +        $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(krb5pluginsdir)"; \
 +      }
 +
 +uninstall-krb5pluginsLTLIBRARIES:
 +      @$(NORMAL_UNINSTALL)
 +      @list='$(krb5plugins_LTLIBRARIES)'; test -n "$(krb5pluginsdir)" || list=; \
 +      for p in $$list; do \
 +        $(am__strip_dir) \
 +        echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(krb5pluginsdir)/$$f'"; \
 +        $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(krb5pluginsdir)/$$f"; \
 +      done
 +
 +clean-krb5pluginsLTLIBRARIES:
 +      -test -z "$(krb5plugins_LTLIBRARIES)" || rm -f $(krb5plugins_LTLIBRARIES)
 +      @list='$(krb5plugins_LTLIBRARIES)'; for p in $$list; do \
 +        dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 +        test "$$dir" != "$$p" || dir=.; \
 +        echo "rm -f \"$${dir}/so_locations\""; \
 +        rm -f "$${dir}/so_locations"; \
 +      done
 +mech_eap.la: $(mech_eap_la_OBJECTS) $(mech_eap_la_DEPENDENCIES) 
 +      $(mech_eap_la_LINK) -rpath $(gssdir) $(mech_eap_la_OBJECTS) $(mech_eap_la_LIBADD) $(LIBS)
 +radius_ad.la: $(radius_ad_la_OBJECTS) $(radius_ad_la_DEPENDENCIES) 
 +      $(radius_ad_la_LINK) $(am_radius_ad_la_rpath) $(radius_ad_la_OBJECTS) $(radius_ad_la_LIBADD) $(LIBS)
 +
 +mostlyclean-compile:
 +      -rm -f *.$(OBJEXT)
 +
 +distclean-compile:
 +      -rm -f *.tab.c
 +
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-accept_sec_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-acquire_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-acquire_cred_with_password.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-add_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-add_cred_with_password.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-authorize_localname.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-canonicalize_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-compare_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-context_time.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-delete_name_attribute.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-delete_sec_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-display_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-display_name_ext.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-display_status.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-duplicate_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-eap_mech.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-exchange_meta_data.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-export_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-export_name_composite.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-export_sec_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-get_mic.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-get_name_attribute.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-gsseap_err.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-import_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-import_sec_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-indicate_mechs.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-init_sec_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_attrs_for_mech.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_cred_by_mech.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_cred_by_oid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_mech_for_saslname.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_mechs_for_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_names_for_mech.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_saslname_for_mech.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-inquire_sec_context_by_oid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-map_name_to_any.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-process_context_token.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-pseudo_random.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-query_mechanism_info.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-query_meta_data.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-radsec_err.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-release_any_name_mapping.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-release_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-release_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-release_oid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-set_cred_option.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-set_name_attribute.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-set_sec_context_option.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-store_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-unwrap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-unwrap_iov.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_attr.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_base64.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_buffer.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_cksum.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_context.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_cred.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_crypt.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_json.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_krb.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_lucid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_mech.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_moonshot.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_name.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_oid.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_ordering.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_radius.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_reauth.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_saml.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_shib.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_sm.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_tld.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-util_token.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-verify_mic.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-wrap.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-wrap_iov.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-wrap_iov_length.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mech_eap_la-wrap_size_limit.Plo@am__quote@
 +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/radius_ad_la-util_adshim.Plo@am__quote@
 +
 +.c.o:
 +@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 +
 +.c.obj:
 +@am__fastdepCC_TRUE@  $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
 +
 +.c.lo:
 +@am__fastdepCC_TRUE@  $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
 +
- mech_eap_la-delete_name_attribute.lo: delete_name_attribute.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-delete_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-delete_name_attribute.Tpo -c -o mech_eap_la-delete_name_attribute.lo `test -f 'delete_name_attribute.c' || echo '$(srcdir)/'`delete_name_attribute.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-delete_name_attribute.Tpo $(DEPDIR)/mech_eap_la-delete_name_attribute.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='delete_name_attribute.c' object='mech_eap_la-delete_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-delete_name_attribute.lo `test -f 'delete_name_attribute.c' || echo '$(srcdir)/'`delete_name_attribute.c
- 
 +mech_eap_la-acquire_cred.lo: acquire_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-acquire_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-acquire_cred.Tpo -c -o mech_eap_la-acquire_cred.lo `test -f 'acquire_cred.c' || echo '$(srcdir)/'`acquire_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-acquire_cred.Tpo $(DEPDIR)/mech_eap_la-acquire_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='acquire_cred.c' object='mech_eap_la-acquire_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-acquire_cred.lo `test -f 'acquire_cred.c' || echo '$(srcdir)/'`acquire_cred.c
 +
 +mech_eap_la-acquire_cred_with_password.lo: acquire_cred_with_password.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-acquire_cred_with_password.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-acquire_cred_with_password.Tpo -c -o mech_eap_la-acquire_cred_with_password.lo `test -f 'acquire_cred_with_password.c' || echo '$(srcdir)/'`acquire_cred_with_password.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-acquire_cred_with_password.Tpo $(DEPDIR)/mech_eap_la-acquire_cred_with_password.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='acquire_cred_with_password.c' object='mech_eap_la-acquire_cred_with_password.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-acquire_cred_with_password.lo `test -f 'acquire_cred_with_password.c' || echo '$(srcdir)/'`acquire_cred_with_password.c
 +
 +mech_eap_la-add_cred.lo: add_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-add_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-add_cred.Tpo -c -o mech_eap_la-add_cred.lo `test -f 'add_cred.c' || echo '$(srcdir)/'`add_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-add_cred.Tpo $(DEPDIR)/mech_eap_la-add_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='add_cred.c' object='mech_eap_la-add_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-add_cred.lo `test -f 'add_cred.c' || echo '$(srcdir)/'`add_cred.c
 +
 +mech_eap_la-add_cred_with_password.lo: add_cred_with_password.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-add_cred_with_password.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-add_cred_with_password.Tpo -c -o mech_eap_la-add_cred_with_password.lo `test -f 'add_cred_with_password.c' || echo '$(srcdir)/'`add_cred_with_password.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-add_cred_with_password.Tpo $(DEPDIR)/mech_eap_la-add_cred_with_password.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='add_cred_with_password.c' object='mech_eap_la-add_cred_with_password.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-add_cred_with_password.lo `test -f 'add_cred_with_password.c' || echo '$(srcdir)/'`add_cred_with_password.c
 +
 +mech_eap_la-authorize_localname.lo: authorize_localname.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-authorize_localname.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-authorize_localname.Tpo -c -o mech_eap_la-authorize_localname.lo `test -f 'authorize_localname.c' || echo '$(srcdir)/'`authorize_localname.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-authorize_localname.Tpo $(DEPDIR)/mech_eap_la-authorize_localname.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='authorize_localname.c' object='mech_eap_la-authorize_localname.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-authorize_localname.lo `test -f 'authorize_localname.c' || echo '$(srcdir)/'`authorize_localname.c
 +
 +mech_eap_la-canonicalize_name.lo: canonicalize_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-canonicalize_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-canonicalize_name.Tpo -c -o mech_eap_la-canonicalize_name.lo `test -f 'canonicalize_name.c' || echo '$(srcdir)/'`canonicalize_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-canonicalize_name.Tpo $(DEPDIR)/mech_eap_la-canonicalize_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='canonicalize_name.c' object='mech_eap_la-canonicalize_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-canonicalize_name.lo `test -f 'canonicalize_name.c' || echo '$(srcdir)/'`canonicalize_name.c
 +
 +mech_eap_la-compare_name.lo: compare_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-compare_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-compare_name.Tpo -c -o mech_eap_la-compare_name.lo `test -f 'compare_name.c' || echo '$(srcdir)/'`compare_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-compare_name.Tpo $(DEPDIR)/mech_eap_la-compare_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='compare_name.c' object='mech_eap_la-compare_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-compare_name.lo `test -f 'compare_name.c' || echo '$(srcdir)/'`compare_name.c
 +
 +mech_eap_la-context_time.lo: context_time.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-context_time.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-context_time.Tpo -c -o mech_eap_la-context_time.lo `test -f 'context_time.c' || echo '$(srcdir)/'`context_time.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-context_time.Tpo $(DEPDIR)/mech_eap_la-context_time.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='context_time.c' object='mech_eap_la-context_time.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-context_time.lo `test -f 'context_time.c' || echo '$(srcdir)/'`context_time.c
 +
- mech_eap_la-export_name_composite.lo: export_name_composite.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-export_name_composite.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-export_name_composite.Tpo -c -o mech_eap_la-export_name_composite.lo `test -f 'export_name_composite.c' || echo '$(srcdir)/'`export_name_composite.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-export_name_composite.Tpo $(DEPDIR)/mech_eap_la-export_name_composite.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='export_name_composite.c' object='mech_eap_la-export_name_composite.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-export_name_composite.lo `test -f 'export_name_composite.c' || echo '$(srcdir)/'`export_name_composite.c
- 
 +mech_eap_la-delete_sec_context.lo: delete_sec_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-delete_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-delete_sec_context.Tpo -c -o mech_eap_la-delete_sec_context.lo `test -f 'delete_sec_context.c' || echo '$(srcdir)/'`delete_sec_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-delete_sec_context.Tpo $(DEPDIR)/mech_eap_la-delete_sec_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='delete_sec_context.c' object='mech_eap_la-delete_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-delete_sec_context.lo `test -f 'delete_sec_context.c' || echo '$(srcdir)/'`delete_sec_context.c
 +
 +mech_eap_la-display_name.lo: display_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-display_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-display_name.Tpo -c -o mech_eap_la-display_name.lo `test -f 'display_name.c' || echo '$(srcdir)/'`display_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-display_name.Tpo $(DEPDIR)/mech_eap_la-display_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='display_name.c' object='mech_eap_la-display_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-display_name.lo `test -f 'display_name.c' || echo '$(srcdir)/'`display_name.c
 +
 +mech_eap_la-display_name_ext.lo: display_name_ext.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-display_name_ext.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-display_name_ext.Tpo -c -o mech_eap_la-display_name_ext.lo `test -f 'display_name_ext.c' || echo '$(srcdir)/'`display_name_ext.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-display_name_ext.Tpo $(DEPDIR)/mech_eap_la-display_name_ext.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='display_name_ext.c' object='mech_eap_la-display_name_ext.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-display_name_ext.lo `test -f 'display_name_ext.c' || echo '$(srcdir)/'`display_name_ext.c
 +
 +mech_eap_la-display_status.lo: display_status.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-display_status.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-display_status.Tpo -c -o mech_eap_la-display_status.lo `test -f 'display_status.c' || echo '$(srcdir)/'`display_status.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-display_status.Tpo $(DEPDIR)/mech_eap_la-display_status.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='display_status.c' object='mech_eap_la-display_status.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-display_status.lo `test -f 'display_status.c' || echo '$(srcdir)/'`display_status.c
 +
 +mech_eap_la-duplicate_name.lo: duplicate_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-duplicate_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-duplicate_name.Tpo -c -o mech_eap_la-duplicate_name.lo `test -f 'duplicate_name.c' || echo '$(srcdir)/'`duplicate_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-duplicate_name.Tpo $(DEPDIR)/mech_eap_la-duplicate_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='duplicate_name.c' object='mech_eap_la-duplicate_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-duplicate_name.lo `test -f 'duplicate_name.c' || echo '$(srcdir)/'`duplicate_name.c
 +
 +mech_eap_la-eap_mech.lo: eap_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-eap_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-eap_mech.Tpo -c -o mech_eap_la-eap_mech.lo `test -f 'eap_mech.c' || echo '$(srcdir)/'`eap_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-eap_mech.Tpo $(DEPDIR)/mech_eap_la-eap_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='eap_mech.c' object='mech_eap_la-eap_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-eap_mech.lo `test -f 'eap_mech.c' || echo '$(srcdir)/'`eap_mech.c
 +
++mech_eap_la-exchange_meta_data.lo: exchange_meta_data.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-exchange_meta_data.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-exchange_meta_data.Tpo -c -o mech_eap_la-exchange_meta_data.lo `test -f 'exchange_meta_data.c' || echo '$(srcdir)/'`exchange_meta_data.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-exchange_meta_data.Tpo $(DEPDIR)/mech_eap_la-exchange_meta_data.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='exchange_meta_data.c' object='mech_eap_la-exchange_meta_data.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-exchange_meta_data.lo `test -f 'exchange_meta_data.c' || echo '$(srcdir)/'`exchange_meta_data.c
++
 +mech_eap_la-export_name.lo: export_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-export_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-export_name.Tpo -c -o mech_eap_la-export_name.lo `test -f 'export_name.c' || echo '$(srcdir)/'`export_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-export_name.Tpo $(DEPDIR)/mech_eap_la-export_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='export_name.c' object='mech_eap_la-export_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-export_name.lo `test -f 'export_name.c' || echo '$(srcdir)/'`export_name.c
 +
- mech_eap_la-get_name_attribute.lo: get_name_attribute.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-get_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-get_name_attribute.Tpo -c -o mech_eap_la-get_name_attribute.lo `test -f 'get_name_attribute.c' || echo '$(srcdir)/'`get_name_attribute.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-get_name_attribute.Tpo $(DEPDIR)/mech_eap_la-get_name_attribute.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='get_name_attribute.c' object='mech_eap_la-get_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-get_name_attribute.lo `test -f 'get_name_attribute.c' || echo '$(srcdir)/'`get_name_attribute.c
- 
 +mech_eap_la-export_sec_context.lo: export_sec_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-export_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-export_sec_context.Tpo -c -o mech_eap_la-export_sec_context.lo `test -f 'export_sec_context.c' || echo '$(srcdir)/'`export_sec_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-export_sec_context.Tpo $(DEPDIR)/mech_eap_la-export_sec_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='export_sec_context.c' object='mech_eap_la-export_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-export_sec_context.lo `test -f 'export_sec_context.c' || echo '$(srcdir)/'`export_sec_context.c
 +
 +mech_eap_la-get_mic.lo: get_mic.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-get_mic.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-get_mic.Tpo -c -o mech_eap_la-get_mic.lo `test -f 'get_mic.c' || echo '$(srcdir)/'`get_mic.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-get_mic.Tpo $(DEPDIR)/mech_eap_la-get_mic.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='get_mic.c' object='mech_eap_la-get_mic.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-get_mic.lo `test -f 'get_mic.c' || echo '$(srcdir)/'`get_mic.c
 +
- mech_eap_la-inquire_name.lo: inquire_name.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_name.Tpo -c -o mech_eap_la-inquire_name.lo `test -f 'inquire_name.c' || echo '$(srcdir)/'`inquire_name.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_name.Tpo $(DEPDIR)/mech_eap_la-inquire_name.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_name.c' object='mech_eap_la-inquire_name.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_name.lo `test -f 'inquire_name.c' || echo '$(srcdir)/'`inquire_name.c
- 
 +mech_eap_la-gsseap_err.lo: gsseap_err.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-gsseap_err.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-gsseap_err.Tpo -c -o mech_eap_la-gsseap_err.lo `test -f 'gsseap_err.c' || echo '$(srcdir)/'`gsseap_err.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-gsseap_err.Tpo $(DEPDIR)/mech_eap_la-gsseap_err.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='gsseap_err.c' object='mech_eap_la-gsseap_err.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-gsseap_err.lo `test -f 'gsseap_err.c' || echo '$(srcdir)/'`gsseap_err.c
 +
 +mech_eap_la-import_name.lo: import_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-import_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-import_name.Tpo -c -o mech_eap_la-import_name.lo `test -f 'import_name.c' || echo '$(srcdir)/'`import_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-import_name.Tpo $(DEPDIR)/mech_eap_la-import_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='import_name.c' object='mech_eap_la-import_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-import_name.lo `test -f 'import_name.c' || echo '$(srcdir)/'`import_name.c
 +
 +mech_eap_la-import_sec_context.lo: import_sec_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-import_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-import_sec_context.Tpo -c -o mech_eap_la-import_sec_context.lo `test -f 'import_sec_context.c' || echo '$(srcdir)/'`import_sec_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-import_sec_context.Tpo $(DEPDIR)/mech_eap_la-import_sec_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='import_sec_context.c' object='mech_eap_la-import_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-import_sec_context.lo `test -f 'import_sec_context.c' || echo '$(srcdir)/'`import_sec_context.c
 +
 +mech_eap_la-indicate_mechs.lo: indicate_mechs.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-indicate_mechs.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-indicate_mechs.Tpo -c -o mech_eap_la-indicate_mechs.lo `test -f 'indicate_mechs.c' || echo '$(srcdir)/'`indicate_mechs.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-indicate_mechs.Tpo $(DEPDIR)/mech_eap_la-indicate_mechs.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='indicate_mechs.c' object='mech_eap_la-indicate_mechs.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-indicate_mechs.lo `test -f 'indicate_mechs.c' || echo '$(srcdir)/'`indicate_mechs.c
 +
 +mech_eap_la-init_sec_context.lo: init_sec_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-init_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-init_sec_context.Tpo -c -o mech_eap_la-init_sec_context.lo `test -f 'init_sec_context.c' || echo '$(srcdir)/'`init_sec_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-init_sec_context.Tpo $(DEPDIR)/mech_eap_la-init_sec_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='init_sec_context.c' object='mech_eap_la-init_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-init_sec_context.lo `test -f 'init_sec_context.c' || echo '$(srcdir)/'`init_sec_context.c
 +
 +mech_eap_la-inquire_attrs_for_mech.lo: inquire_attrs_for_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_attrs_for_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_attrs_for_mech.Tpo -c -o mech_eap_la-inquire_attrs_for_mech.lo `test -f 'inquire_attrs_for_mech.c' || echo '$(srcdir)/'`inquire_attrs_for_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_attrs_for_mech.Tpo $(DEPDIR)/mech_eap_la-inquire_attrs_for_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_attrs_for_mech.c' object='mech_eap_la-inquire_attrs_for_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_attrs_for_mech.lo `test -f 'inquire_attrs_for_mech.c' || echo '$(srcdir)/'`inquire_attrs_for_mech.c
 +
 +mech_eap_la-inquire_context.lo: inquire_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_context.Tpo -c -o mech_eap_la-inquire_context.lo `test -f 'inquire_context.c' || echo '$(srcdir)/'`inquire_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_context.Tpo $(DEPDIR)/mech_eap_la-inquire_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_context.c' object='mech_eap_la-inquire_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_context.lo `test -f 'inquire_context.c' || echo '$(srcdir)/'`inquire_context.c
 +
 +mech_eap_la-inquire_cred.lo: inquire_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_cred.Tpo -c -o mech_eap_la-inquire_cred.lo `test -f 'inquire_cred.c' || echo '$(srcdir)/'`inquire_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_cred.Tpo $(DEPDIR)/mech_eap_la-inquire_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_cred.c' object='mech_eap_la-inquire_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_cred.lo `test -f 'inquire_cred.c' || echo '$(srcdir)/'`inquire_cred.c
 +
 +mech_eap_la-inquire_cred_by_mech.lo: inquire_cred_by_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_cred_by_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_cred_by_mech.Tpo -c -o mech_eap_la-inquire_cred_by_mech.lo `test -f 'inquire_cred_by_mech.c' || echo '$(srcdir)/'`inquire_cred_by_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_cred_by_mech.Tpo $(DEPDIR)/mech_eap_la-inquire_cred_by_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_cred_by_mech.c' object='mech_eap_la-inquire_cred_by_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_cred_by_mech.lo `test -f 'inquire_cred_by_mech.c' || echo '$(srcdir)/'`inquire_cred_by_mech.c
 +
 +mech_eap_la-inquire_cred_by_oid.lo: inquire_cred_by_oid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_cred_by_oid.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_cred_by_oid.Tpo -c -o mech_eap_la-inquire_cred_by_oid.lo `test -f 'inquire_cred_by_oid.c' || echo '$(srcdir)/'`inquire_cred_by_oid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_cred_by_oid.Tpo $(DEPDIR)/mech_eap_la-inquire_cred_by_oid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_cred_by_oid.c' object='mech_eap_la-inquire_cred_by_oid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_cred_by_oid.lo `test -f 'inquire_cred_by_oid.c' || echo '$(srcdir)/'`inquire_cred_by_oid.c
 +
 +mech_eap_la-inquire_mech_for_saslname.lo: inquire_mech_for_saslname.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_mech_for_saslname.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_mech_for_saslname.Tpo -c -o mech_eap_la-inquire_mech_for_saslname.lo `test -f 'inquire_mech_for_saslname.c' || echo '$(srcdir)/'`inquire_mech_for_saslname.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_mech_for_saslname.Tpo $(DEPDIR)/mech_eap_la-inquire_mech_for_saslname.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_mech_for_saslname.c' object='mech_eap_la-inquire_mech_for_saslname.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_mech_for_saslname.lo `test -f 'inquire_mech_for_saslname.c' || echo '$(srcdir)/'`inquire_mech_for_saslname.c
 +
 +mech_eap_la-inquire_mechs_for_name.lo: inquire_mechs_for_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_mechs_for_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_mechs_for_name.Tpo -c -o mech_eap_la-inquire_mechs_for_name.lo `test -f 'inquire_mechs_for_name.c' || echo '$(srcdir)/'`inquire_mechs_for_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_mechs_for_name.Tpo $(DEPDIR)/mech_eap_la-inquire_mechs_for_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_mechs_for_name.c' object='mech_eap_la-inquire_mechs_for_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_mechs_for_name.lo `test -f 'inquire_mechs_for_name.c' || echo '$(srcdir)/'`inquire_mechs_for_name.c
 +
- mech_eap_la-map_name_to_any.lo: map_name_to_any.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-map_name_to_any.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-map_name_to_any.Tpo -c -o mech_eap_la-map_name_to_any.lo `test -f 'map_name_to_any.c' || echo '$(srcdir)/'`map_name_to_any.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-map_name_to_any.Tpo $(DEPDIR)/mech_eap_la-map_name_to_any.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='map_name_to_any.c' object='mech_eap_la-map_name_to_any.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-map_name_to_any.lo `test -f 'map_name_to_any.c' || echo '$(srcdir)/'`map_name_to_any.c
- 
 +mech_eap_la-inquire_names_for_mech.lo: inquire_names_for_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_names_for_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_names_for_mech.Tpo -c -o mech_eap_la-inquire_names_for_mech.lo `test -f 'inquire_names_for_mech.c' || echo '$(srcdir)/'`inquire_names_for_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_names_for_mech.Tpo $(DEPDIR)/mech_eap_la-inquire_names_for_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_names_for_mech.c' object='mech_eap_la-inquire_names_for_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_names_for_mech.lo `test -f 'inquire_names_for_mech.c' || echo '$(srcdir)/'`inquire_names_for_mech.c
 +
 +mech_eap_la-inquire_saslname_for_mech.lo: inquire_saslname_for_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_saslname_for_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_saslname_for_mech.Tpo -c -o mech_eap_la-inquire_saslname_for_mech.lo `test -f 'inquire_saslname_for_mech.c' || echo '$(srcdir)/'`inquire_saslname_for_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_saslname_for_mech.Tpo $(DEPDIR)/mech_eap_la-inquire_saslname_for_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_saslname_for_mech.c' object='mech_eap_la-inquire_saslname_for_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_saslname_for_mech.lo `test -f 'inquire_saslname_for_mech.c' || echo '$(srcdir)/'`inquire_saslname_for_mech.c
 +
 +mech_eap_la-inquire_sec_context_by_oid.lo: inquire_sec_context_by_oid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_sec_context_by_oid.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_sec_context_by_oid.Tpo -c -o mech_eap_la-inquire_sec_context_by_oid.lo `test -f 'inquire_sec_context_by_oid.c' || echo '$(srcdir)/'`inquire_sec_context_by_oid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_sec_context_by_oid.Tpo $(DEPDIR)/mech_eap_la-inquire_sec_context_by_oid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_sec_context_by_oid.c' object='mech_eap_la-inquire_sec_context_by_oid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_sec_context_by_oid.lo `test -f 'inquire_sec_context_by_oid.c' || echo '$(srcdir)/'`inquire_sec_context_by_oid.c
 +
- mech_eap_la-release_any_name_mapping.lo: release_any_name_mapping.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-release_any_name_mapping.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-release_any_name_mapping.Tpo -c -o mech_eap_la-release_any_name_mapping.lo `test -f 'release_any_name_mapping.c' || echo '$(srcdir)/'`release_any_name_mapping.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-release_any_name_mapping.Tpo $(DEPDIR)/mech_eap_la-release_any_name_mapping.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='release_any_name_mapping.c' object='mech_eap_la-release_any_name_mapping.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-release_any_name_mapping.lo `test -f 'release_any_name_mapping.c' || echo '$(srcdir)/'`release_any_name_mapping.c
- 
 +mech_eap_la-process_context_token.lo: process_context_token.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-process_context_token.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-process_context_token.Tpo -c -o mech_eap_la-process_context_token.lo `test -f 'process_context_token.c' || echo '$(srcdir)/'`process_context_token.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-process_context_token.Tpo $(DEPDIR)/mech_eap_la-process_context_token.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='process_context_token.c' object='mech_eap_la-process_context_token.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-process_context_token.lo `test -f 'process_context_token.c' || echo '$(srcdir)/'`process_context_token.c
 +
 +mech_eap_la-pseudo_random.lo: pseudo_random.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-pseudo_random.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-pseudo_random.Tpo -c -o mech_eap_la-pseudo_random.lo `test -f 'pseudo_random.c' || echo '$(srcdir)/'`pseudo_random.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-pseudo_random.Tpo $(DEPDIR)/mech_eap_la-pseudo_random.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='pseudo_random.c' object='mech_eap_la-pseudo_random.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-pseudo_random.lo `test -f 'pseudo_random.c' || echo '$(srcdir)/'`pseudo_random.c
 +
++mech_eap_la-query_mechanism_info.lo: query_mechanism_info.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-query_mechanism_info.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-query_mechanism_info.Tpo -c -o mech_eap_la-query_mechanism_info.lo `test -f 'query_mechanism_info.c' || echo '$(srcdir)/'`query_mechanism_info.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-query_mechanism_info.Tpo $(DEPDIR)/mech_eap_la-query_mechanism_info.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='query_mechanism_info.c' object='mech_eap_la-query_mechanism_info.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-query_mechanism_info.lo `test -f 'query_mechanism_info.c' || echo '$(srcdir)/'`query_mechanism_info.c
++
++mech_eap_la-query_meta_data.lo: query_meta_data.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-query_meta_data.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-query_meta_data.Tpo -c -o mech_eap_la-query_meta_data.lo `test -f 'query_meta_data.c' || echo '$(srcdir)/'`query_meta_data.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-query_meta_data.Tpo $(DEPDIR)/mech_eap_la-query_meta_data.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='query_meta_data.c' object='mech_eap_la-query_meta_data.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-query_meta_data.lo `test -f 'query_meta_data.c' || echo '$(srcdir)/'`query_meta_data.c
++
 +mech_eap_la-radsec_err.lo: radsec_err.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-radsec_err.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-radsec_err.Tpo -c -o mech_eap_la-radsec_err.lo `test -f 'radsec_err.c' || echo '$(srcdir)/'`radsec_err.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-radsec_err.Tpo $(DEPDIR)/mech_eap_la-radsec_err.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='radsec_err.c' object='mech_eap_la-radsec_err.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-radsec_err.lo `test -f 'radsec_err.c' || echo '$(srcdir)/'`radsec_err.c
 +
- mech_eap_la-set_name_attribute.lo: set_name_attribute.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-set_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-set_name_attribute.Tpo -c -o mech_eap_la-set_name_attribute.lo `test -f 'set_name_attribute.c' || echo '$(srcdir)/'`set_name_attribute.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-set_name_attribute.Tpo $(DEPDIR)/mech_eap_la-set_name_attribute.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='set_name_attribute.c' object='mech_eap_la-set_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-set_name_attribute.lo `test -f 'set_name_attribute.c' || echo '$(srcdir)/'`set_name_attribute.c
- 
 +mech_eap_la-release_cred.lo: release_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-release_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-release_cred.Tpo -c -o mech_eap_la-release_cred.lo `test -f 'release_cred.c' || echo '$(srcdir)/'`release_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-release_cred.Tpo $(DEPDIR)/mech_eap_la-release_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='release_cred.c' object='mech_eap_la-release_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-release_cred.lo `test -f 'release_cred.c' || echo '$(srcdir)/'`release_cred.c
 +
 +mech_eap_la-release_name.lo: release_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-release_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-release_name.Tpo -c -o mech_eap_la-release_name.lo `test -f 'release_name.c' || echo '$(srcdir)/'`release_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-release_name.Tpo $(DEPDIR)/mech_eap_la-release_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='release_name.c' object='mech_eap_la-release_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-release_name.lo `test -f 'release_name.c' || echo '$(srcdir)/'`release_name.c
 +
 +mech_eap_la-release_oid.lo: release_oid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-release_oid.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-release_oid.Tpo -c -o mech_eap_la-release_oid.lo `test -f 'release_oid.c' || echo '$(srcdir)/'`release_oid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-release_oid.Tpo $(DEPDIR)/mech_eap_la-release_oid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='release_oid.c' object='mech_eap_la-release_oid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-release_oid.lo `test -f 'release_oid.c' || echo '$(srcdir)/'`release_oid.c
 +
- mech_eap_la-util_base64.lo: util_base64.c
- @am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_base64.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_base64.Tpo -c -o mech_eap_la-util_base64.lo `test -f 'util_base64.c' || echo '$(srcdir)/'`util_base64.c
- @am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_base64.Tpo $(DEPDIR)/mech_eap_la-util_base64.Plo
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_base64.c' object='mech_eap_la-util_base64.lo' libtool=yes @AMDEPBACKSLASH@
- @AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- @am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_base64.lo `test -f 'util_base64.c' || echo '$(srcdir)/'`util_base64.c
- 
 +mech_eap_la-set_cred_option.lo: set_cred_option.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-set_cred_option.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-set_cred_option.Tpo -c -o mech_eap_la-set_cred_option.lo `test -f 'set_cred_option.c' || echo '$(srcdir)/'`set_cred_option.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-set_cred_option.Tpo $(DEPDIR)/mech_eap_la-set_cred_option.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='set_cred_option.c' object='mech_eap_la-set_cred_option.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-set_cred_option.lo `test -f 'set_cred_option.c' || echo '$(srcdir)/'`set_cred_option.c
 +
 +mech_eap_la-set_sec_context_option.lo: set_sec_context_option.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-set_sec_context_option.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-set_sec_context_option.Tpo -c -o mech_eap_la-set_sec_context_option.lo `test -f 'set_sec_context_option.c' || echo '$(srcdir)/'`set_sec_context_option.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-set_sec_context_option.Tpo $(DEPDIR)/mech_eap_la-set_sec_context_option.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='set_sec_context_option.c' object='mech_eap_la-set_sec_context_option.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-set_sec_context_option.lo `test -f 'set_sec_context_option.c' || echo '$(srcdir)/'`set_sec_context_option.c
 +
 +mech_eap_la-store_cred.lo: store_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-store_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-store_cred.Tpo -c -o mech_eap_la-store_cred.lo `test -f 'store_cred.c' || echo '$(srcdir)/'`store_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-store_cred.Tpo $(DEPDIR)/mech_eap_la-store_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='store_cred.c' object='mech_eap_la-store_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-store_cred.lo `test -f 'store_cred.c' || echo '$(srcdir)/'`store_cred.c
 +
 +mech_eap_la-unwrap.lo: unwrap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-unwrap.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-unwrap.Tpo -c -o mech_eap_la-unwrap.lo `test -f 'unwrap.c' || echo '$(srcdir)/'`unwrap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-unwrap.Tpo $(DEPDIR)/mech_eap_la-unwrap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='unwrap.c' object='mech_eap_la-unwrap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-unwrap.lo `test -f 'unwrap.c' || echo '$(srcdir)/'`unwrap.c
 +
 +mech_eap_la-unwrap_iov.lo: unwrap_iov.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-unwrap_iov.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-unwrap_iov.Tpo -c -o mech_eap_la-unwrap_iov.lo `test -f 'unwrap_iov.c' || echo '$(srcdir)/'`unwrap_iov.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-unwrap_iov.Tpo $(DEPDIR)/mech_eap_la-unwrap_iov.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='unwrap_iov.c' object='mech_eap_la-unwrap_iov.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-unwrap_iov.lo `test -f 'unwrap_iov.c' || echo '$(srcdir)/'`unwrap_iov.c
 +
 +mech_eap_la-util_buffer.lo: util_buffer.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_buffer.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_buffer.Tpo -c -o mech_eap_la-util_buffer.lo `test -f 'util_buffer.c' || echo '$(srcdir)/'`util_buffer.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_buffer.Tpo $(DEPDIR)/mech_eap_la-util_buffer.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_buffer.c' object='mech_eap_la-util_buffer.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_buffer.lo `test -f 'util_buffer.c' || echo '$(srcdir)/'`util_buffer.c
 +
 +mech_eap_la-util_context.lo: util_context.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_context.Tpo -c -o mech_eap_la-util_context.lo `test -f 'util_context.c' || echo '$(srcdir)/'`util_context.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_context.Tpo $(DEPDIR)/mech_eap_la-util_context.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_context.c' object='mech_eap_la-util_context.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_context.lo `test -f 'util_context.c' || echo '$(srcdir)/'`util_context.c
 +
 +mech_eap_la-util_cksum.lo: util_cksum.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_cksum.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_cksum.Tpo -c -o mech_eap_la-util_cksum.lo `test -f 'util_cksum.c' || echo '$(srcdir)/'`util_cksum.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_cksum.Tpo $(DEPDIR)/mech_eap_la-util_cksum.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_cksum.c' object='mech_eap_la-util_cksum.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_cksum.lo `test -f 'util_cksum.c' || echo '$(srcdir)/'`util_cksum.c
 +
 +mech_eap_la-util_cred.lo: util_cred.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_cred.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_cred.Tpo -c -o mech_eap_la-util_cred.lo `test -f 'util_cred.c' || echo '$(srcdir)/'`util_cred.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_cred.Tpo $(DEPDIR)/mech_eap_la-util_cred.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_cred.c' object='mech_eap_la-util_cred.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_cred.lo `test -f 'util_cred.c' || echo '$(srcdir)/'`util_cred.c
 +
 +mech_eap_la-util_crypt.lo: util_crypt.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_crypt.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_crypt.Tpo -c -o mech_eap_la-util_crypt.lo `test -f 'util_crypt.c' || echo '$(srcdir)/'`util_crypt.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_crypt.Tpo $(DEPDIR)/mech_eap_la-util_crypt.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_crypt.c' object='mech_eap_la-util_crypt.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_crypt.lo `test -f 'util_crypt.c' || echo '$(srcdir)/'`util_crypt.c
 +
 +mech_eap_la-util_krb.lo: util_krb.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_krb.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_krb.Tpo -c -o mech_eap_la-util_krb.lo `test -f 'util_krb.c' || echo '$(srcdir)/'`util_krb.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_krb.Tpo $(DEPDIR)/mech_eap_la-util_krb.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_krb.c' object='mech_eap_la-util_krb.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_krb.lo `test -f 'util_krb.c' || echo '$(srcdir)/'`util_krb.c
 +
 +mech_eap_la-util_lucid.lo: util_lucid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_lucid.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_lucid.Tpo -c -o mech_eap_la-util_lucid.lo `test -f 'util_lucid.c' || echo '$(srcdir)/'`util_lucid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_lucid.Tpo $(DEPDIR)/mech_eap_la-util_lucid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_lucid.c' object='mech_eap_la-util_lucid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_lucid.lo `test -f 'util_lucid.c' || echo '$(srcdir)/'`util_lucid.c
 +
 +mech_eap_la-util_mech.lo: util_mech.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_mech.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_mech.Tpo -c -o mech_eap_la-util_mech.lo `test -f 'util_mech.c' || echo '$(srcdir)/'`util_mech.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_mech.Tpo $(DEPDIR)/mech_eap_la-util_mech.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_mech.c' object='mech_eap_la-util_mech.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_mech.lo `test -f 'util_mech.c' || echo '$(srcdir)/'`util_mech.c
 +
 +mech_eap_la-util_name.lo: util_name.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_name.Tpo -c -o mech_eap_la-util_name.lo `test -f 'util_name.c' || echo '$(srcdir)/'`util_name.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_name.Tpo $(DEPDIR)/mech_eap_la-util_name.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_name.c' object='mech_eap_la-util_name.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_name.lo `test -f 'util_name.c' || echo '$(srcdir)/'`util_name.c
 +
 +mech_eap_la-util_oid.lo: util_oid.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_oid.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_oid.Tpo -c -o mech_eap_la-util_oid.lo `test -f 'util_oid.c' || echo '$(srcdir)/'`util_oid.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_oid.Tpo $(DEPDIR)/mech_eap_la-util_oid.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_oid.c' object='mech_eap_la-util_oid.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_oid.lo `test -f 'util_oid.c' || echo '$(srcdir)/'`util_oid.c
 +
 +mech_eap_la-util_ordering.lo: util_ordering.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_ordering.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_ordering.Tpo -c -o mech_eap_la-util_ordering.lo `test -f 'util_ordering.c' || echo '$(srcdir)/'`util_ordering.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_ordering.Tpo $(DEPDIR)/mech_eap_la-util_ordering.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_ordering.c' object='mech_eap_la-util_ordering.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_ordering.lo `test -f 'util_ordering.c' || echo '$(srcdir)/'`util_ordering.c
 +
 +mech_eap_la-util_sm.lo: util_sm.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_sm.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_sm.Tpo -c -o mech_eap_la-util_sm.lo `test -f 'util_sm.c' || echo '$(srcdir)/'`util_sm.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_sm.Tpo $(DEPDIR)/mech_eap_la-util_sm.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_sm.c' object='mech_eap_la-util_sm.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_sm.lo `test -f 'util_sm.c' || echo '$(srcdir)/'`util_sm.c
 +
++mech_eap_la-util_tld.lo: util_tld.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_tld.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_tld.Tpo -c -o mech_eap_la-util_tld.lo `test -f 'util_tld.c' || echo '$(srcdir)/'`util_tld.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_tld.Tpo $(DEPDIR)/mech_eap_la-util_tld.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_tld.c' object='mech_eap_la-util_tld.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_tld.lo `test -f 'util_tld.c' || echo '$(srcdir)/'`util_tld.c
++
 +mech_eap_la-util_token.lo: util_token.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_token.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_token.Tpo -c -o mech_eap_la-util_token.lo `test -f 'util_token.c' || echo '$(srcdir)/'`util_token.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_token.Tpo $(DEPDIR)/mech_eap_la-util_token.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_token.c' object='mech_eap_la-util_token.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_token.lo `test -f 'util_token.c' || echo '$(srcdir)/'`util_token.c
 +
 +mech_eap_la-verify_mic.lo: verify_mic.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-verify_mic.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-verify_mic.Tpo -c -o mech_eap_la-verify_mic.lo `test -f 'verify_mic.c' || echo '$(srcdir)/'`verify_mic.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-verify_mic.Tpo $(DEPDIR)/mech_eap_la-verify_mic.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='verify_mic.c' object='mech_eap_la-verify_mic.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-verify_mic.lo `test -f 'verify_mic.c' || echo '$(srcdir)/'`verify_mic.c
 +
 +mech_eap_la-wrap.lo: wrap.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-wrap.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-wrap.Tpo -c -o mech_eap_la-wrap.lo `test -f 'wrap.c' || echo '$(srcdir)/'`wrap.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-wrap.Tpo $(DEPDIR)/mech_eap_la-wrap.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='wrap.c' object='mech_eap_la-wrap.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-wrap.lo `test -f 'wrap.c' || echo '$(srcdir)/'`wrap.c
 +
 +mech_eap_la-wrap_iov.lo: wrap_iov.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-wrap_iov.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-wrap_iov.Tpo -c -o mech_eap_la-wrap_iov.lo `test -f 'wrap_iov.c' || echo '$(srcdir)/'`wrap_iov.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-wrap_iov.Tpo $(DEPDIR)/mech_eap_la-wrap_iov.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='wrap_iov.c' object='mech_eap_la-wrap_iov.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-wrap_iov.lo `test -f 'wrap_iov.c' || echo '$(srcdir)/'`wrap_iov.c
 +
 +mech_eap_la-wrap_iov_length.lo: wrap_iov_length.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-wrap_iov_length.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-wrap_iov_length.Tpo -c -o mech_eap_la-wrap_iov_length.lo `test -f 'wrap_iov_length.c' || echo '$(srcdir)/'`wrap_iov_length.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-wrap_iov_length.Tpo $(DEPDIR)/mech_eap_la-wrap_iov_length.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='wrap_iov_length.c' object='mech_eap_la-wrap_iov_length.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-wrap_iov_length.lo `test -f 'wrap_iov_length.c' || echo '$(srcdir)/'`wrap_iov_length.c
 +
 +mech_eap_la-wrap_size_limit.lo: wrap_size_limit.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-wrap_size_limit.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-wrap_size_limit.Tpo -c -o mech_eap_la-wrap_size_limit.lo `test -f 'wrap_size_limit.c' || echo '$(srcdir)/'`wrap_size_limit.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-wrap_size_limit.Tpo $(DEPDIR)/mech_eap_la-wrap_size_limit.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='wrap_size_limit.c' object='mech_eap_la-wrap_size_limit.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-wrap_size_limit.lo `test -f 'wrap_size_limit.c' || echo '$(srcdir)/'`wrap_size_limit.c
 +
++mech_eap_la-util_moonshot.lo: util_moonshot.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_moonshot.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_moonshot.Tpo -c -o mech_eap_la-util_moonshot.lo `test -f 'util_moonshot.c' || echo '$(srcdir)/'`util_moonshot.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_moonshot.Tpo $(DEPDIR)/mech_eap_la-util_moonshot.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_moonshot.c' object='mech_eap_la-util_moonshot.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_moonshot.lo `test -f 'util_moonshot.c' || echo '$(srcdir)/'`util_moonshot.c
++
++mech_eap_la-accept_sec_context.lo: accept_sec_context.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-accept_sec_context.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-accept_sec_context.Tpo -c -o mech_eap_la-accept_sec_context.lo `test -f 'accept_sec_context.c' || echo '$(srcdir)/'`accept_sec_context.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-accept_sec_context.Tpo $(DEPDIR)/mech_eap_la-accept_sec_context.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='accept_sec_context.c' object='mech_eap_la-accept_sec_context.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-accept_sec_context.lo `test -f 'accept_sec_context.c' || echo '$(srcdir)/'`accept_sec_context.c
++
++mech_eap_la-delete_name_attribute.lo: delete_name_attribute.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-delete_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-delete_name_attribute.Tpo -c -o mech_eap_la-delete_name_attribute.lo `test -f 'delete_name_attribute.c' || echo '$(srcdir)/'`delete_name_attribute.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-delete_name_attribute.Tpo $(DEPDIR)/mech_eap_la-delete_name_attribute.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='delete_name_attribute.c' object='mech_eap_la-delete_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-delete_name_attribute.lo `test -f 'delete_name_attribute.c' || echo '$(srcdir)/'`delete_name_attribute.c
++
++mech_eap_la-export_name_composite.lo: export_name_composite.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-export_name_composite.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-export_name_composite.Tpo -c -o mech_eap_la-export_name_composite.lo `test -f 'export_name_composite.c' || echo '$(srcdir)/'`export_name_composite.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-export_name_composite.Tpo $(DEPDIR)/mech_eap_la-export_name_composite.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='export_name_composite.c' object='mech_eap_la-export_name_composite.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-export_name_composite.lo `test -f 'export_name_composite.c' || echo '$(srcdir)/'`export_name_composite.c
++
++mech_eap_la-get_name_attribute.lo: get_name_attribute.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-get_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-get_name_attribute.Tpo -c -o mech_eap_la-get_name_attribute.lo `test -f 'get_name_attribute.c' || echo '$(srcdir)/'`get_name_attribute.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-get_name_attribute.Tpo $(DEPDIR)/mech_eap_la-get_name_attribute.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='get_name_attribute.c' object='mech_eap_la-get_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-get_name_attribute.lo `test -f 'get_name_attribute.c' || echo '$(srcdir)/'`get_name_attribute.c
++
++mech_eap_la-inquire_name.lo: inquire_name.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-inquire_name.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-inquire_name.Tpo -c -o mech_eap_la-inquire_name.lo `test -f 'inquire_name.c' || echo '$(srcdir)/'`inquire_name.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-inquire_name.Tpo $(DEPDIR)/mech_eap_la-inquire_name.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='inquire_name.c' object='mech_eap_la-inquire_name.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-inquire_name.lo `test -f 'inquire_name.c' || echo '$(srcdir)/'`inquire_name.c
++
++mech_eap_la-map_name_to_any.lo: map_name_to_any.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-map_name_to_any.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-map_name_to_any.Tpo -c -o mech_eap_la-map_name_to_any.lo `test -f 'map_name_to_any.c' || echo '$(srcdir)/'`map_name_to_any.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-map_name_to_any.Tpo $(DEPDIR)/mech_eap_la-map_name_to_any.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='map_name_to_any.c' object='mech_eap_la-map_name_to_any.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-map_name_to_any.lo `test -f 'map_name_to_any.c' || echo '$(srcdir)/'`map_name_to_any.c
++
++mech_eap_la-release_any_name_mapping.lo: release_any_name_mapping.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-release_any_name_mapping.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-release_any_name_mapping.Tpo -c -o mech_eap_la-release_any_name_mapping.lo `test -f 'release_any_name_mapping.c' || echo '$(srcdir)/'`release_any_name_mapping.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-release_any_name_mapping.Tpo $(DEPDIR)/mech_eap_la-release_any_name_mapping.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='release_any_name_mapping.c' object='mech_eap_la-release_any_name_mapping.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-release_any_name_mapping.lo `test -f 'release_any_name_mapping.c' || echo '$(srcdir)/'`release_any_name_mapping.c
++
++mech_eap_la-set_name_attribute.lo: set_name_attribute.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-set_name_attribute.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-set_name_attribute.Tpo -c -o mech_eap_la-set_name_attribute.lo `test -f 'set_name_attribute.c' || echo '$(srcdir)/'`set_name_attribute.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-set_name_attribute.Tpo $(DEPDIR)/mech_eap_la-set_name_attribute.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='set_name_attribute.c' object='mech_eap_la-set_name_attribute.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-set_name_attribute.lo `test -f 'set_name_attribute.c' || echo '$(srcdir)/'`set_name_attribute.c
++
++mech_eap_la-util_base64.lo: util_base64.c
++@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_base64.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_base64.Tpo -c -o mech_eap_la-util_base64.lo `test -f 'util_base64.c' || echo '$(srcdir)/'`util_base64.c
++@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_base64.Tpo $(DEPDIR)/mech_eap_la-util_base64.Plo
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_base64.c' object='mech_eap_la-util_base64.lo' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_base64.lo `test -f 'util_base64.c' || echo '$(srcdir)/'`util_base64.c
++
 +mech_eap_la-util_reauth.lo: util_reauth.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -MT mech_eap_la-util_reauth.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_reauth.Tpo -c -o mech_eap_la-util_reauth.lo `test -f 'util_reauth.c' || echo '$(srcdir)/'`util_reauth.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/mech_eap_la-util_reauth.Tpo $(DEPDIR)/mech_eap_la-util_reauth.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_reauth.c' object='mech_eap_la-util_reauth.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CFLAGS) $(CFLAGS) -c -o mech_eap_la-util_reauth.lo `test -f 'util_reauth.c' || echo '$(srcdir)/'`util_reauth.c
 +
 +radius_ad_la-util_adshim.lo: util_adshim.c
 +@am__fastdepCC_TRUE@  $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(radius_ad_la_CFLAGS) $(CFLAGS) -MT radius_ad_la-util_adshim.lo -MD -MP -MF $(DEPDIR)/radius_ad_la-util_adshim.Tpo -c -o radius_ad_la-util_adshim.lo `test -f 'util_adshim.c' || echo '$(srcdir)/'`util_adshim.c
 +@am__fastdepCC_TRUE@  $(am__mv) $(DEPDIR)/radius_ad_la-util_adshim.Tpo $(DEPDIR)/radius_ad_la-util_adshim.Plo
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     source='util_adshim.c' object='radius_ad_la-util_adshim.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCC_FALSE@     DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCC_FALSE@ $(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(radius_ad_la_CFLAGS) $(CFLAGS) -c -o radius_ad_la-util_adshim.lo `test -f 'util_adshim.c' || echo '$(srcdir)/'`util_adshim.c
 +
 +.cpp.o:
 +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(CXXCOMPILE) -c -o $@ $<
 +
 +.cpp.obj:
 +@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 +
 +.cpp.lo:
 +@am__fastdepCXX_TRUE@ $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LTCXXCOMPILE) -c -o $@ $<
 +
 +mech_eap_la-util_attr.lo: util_attr.cpp
 +@am__fastdepCXX_TRUE@ $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -MT mech_eap_la-util_attr.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_attr.Tpo -c -o mech_eap_la-util_attr.lo `test -f 'util_attr.cpp' || echo '$(srcdir)/'`util_attr.cpp
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/mech_eap_la-util_attr.Tpo $(DEPDIR)/mech_eap_la-util_attr.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='util_attr.cpp' object='mech_eap_la-util_attr.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -c -o mech_eap_la-util_attr.lo `test -f 'util_attr.cpp' || echo '$(srcdir)/'`util_attr.cpp
 +
 +mech_eap_la-util_json.lo: util_json.cpp
 +@am__fastdepCXX_TRUE@ $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -MT mech_eap_la-util_json.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_json.Tpo -c -o mech_eap_la-util_json.lo `test -f 'util_json.cpp' || echo '$(srcdir)/'`util_json.cpp
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/mech_eap_la-util_json.Tpo $(DEPDIR)/mech_eap_la-util_json.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='util_json.cpp' object='mech_eap_la-util_json.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -c -o mech_eap_la-util_json.lo `test -f 'util_json.cpp' || echo '$(srcdir)/'`util_json.cpp
 +
 +mech_eap_la-util_radius.lo: util_radius.cpp
 +@am__fastdepCXX_TRUE@ $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -MT mech_eap_la-util_radius.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_radius.Tpo -c -o mech_eap_la-util_radius.lo `test -f 'util_radius.cpp' || echo '$(srcdir)/'`util_radius.cpp
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/mech_eap_la-util_radius.Tpo $(DEPDIR)/mech_eap_la-util_radius.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='util_radius.cpp' object='mech_eap_la-util_radius.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -c -o mech_eap_la-util_radius.lo `test -f 'util_radius.cpp' || echo '$(srcdir)/'`util_radius.cpp
 +
 +mech_eap_la-util_saml.lo: util_saml.cpp
 +@am__fastdepCXX_TRUE@ $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -MT mech_eap_la-util_saml.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_saml.Tpo -c -o mech_eap_la-util_saml.lo `test -f 'util_saml.cpp' || echo '$(srcdir)/'`util_saml.cpp
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/mech_eap_la-util_saml.Tpo $(DEPDIR)/mech_eap_la-util_saml.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='util_saml.cpp' object='mech_eap_la-util_saml.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -c -o mech_eap_la-util_saml.lo `test -f 'util_saml.cpp' || echo '$(srcdir)/'`util_saml.cpp
 +
 +mech_eap_la-util_shib.lo: util_shib.cpp
 +@am__fastdepCXX_TRUE@ $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -MT mech_eap_la-util_shib.lo -MD -MP -MF $(DEPDIR)/mech_eap_la-util_shib.Tpo -c -o mech_eap_la-util_shib.lo `test -f 'util_shib.cpp' || echo '$(srcdir)/'`util_shib.cpp
 +@am__fastdepCXX_TRUE@ $(am__mv) $(DEPDIR)/mech_eap_la-util_shib.Tpo $(DEPDIR)/mech_eap_la-util_shib.Plo
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    source='util_shib.cpp' object='mech_eap_la-util_shib.lo' libtool=yes @AMDEPBACKSLASH@
 +@AMDEP_TRUE@@am__fastdepCXX_FALSE@    DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 +@am__fastdepCXX_FALSE@        $(LIBTOOL)  --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(mech_eap_la_CPPFLAGS) $(CPPFLAGS) $(mech_eap_la_CXXFLAGS) $(CXXFLAGS) -c -o mech_eap_la-util_shib.lo `test -f 'util_shib.cpp' || echo '$(srcdir)/'`util_shib.cpp
 +
 +mostlyclean-libtool:
 +      -rm -f *.lo
 +
 +clean-libtool:
 +      -rm -rf .libs _libs
 +install-gssincludeHEADERS: $(gssinclude_HEADERS)
 +      @$(NORMAL_INSTALL)
 +      test -z "$(gssincludedir)" || $(MKDIR_P) "$(DESTDIR)$(gssincludedir)"
 +      @list='$(gssinclude_HEADERS)'; test -n "$(gssincludedir)" || list=; \
 +      for p in $$list; do \
 +        if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 +        echo "$$d$$p"; \
 +      done | $(am__base_list) | \
 +      while read files; do \
 +        echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(gssincludedir)'"; \
 +        $(INSTALL_HEADER) $$files "$(DESTDIR)$(gssincludedir)" || exit $$?; \
 +      done
 +
 +uninstall-gssincludeHEADERS:
 +      @$(NORMAL_UNINSTALL)
 +      @list='$(gssinclude_HEADERS)'; test -n "$(gssincludedir)" || list=; \
 +      files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 +      test -n "$$files" || exit 0; \
 +      echo " ( cd '$(DESTDIR)$(gssincludedir)' && rm -f" $$files ")"; \
 +      cd "$(DESTDIR)$(gssincludedir)" && rm -f $$files
 +
 +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 +      list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      mkid -fID $$unique
 +tags: TAGS
 +
 +TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 +              $(TAGS_FILES) $(LISP)
 +      set x; \
 +      here=`pwd`; \
 +      list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      shift; \
 +      if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 +        test -n "$$unique" || unique=$$empty_fix; \
 +        if test $$# -gt 0; then \
 +          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 +            "$$@" $$unique; \
 +        else \
 +          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 +            $$unique; \
 +        fi; \
 +      fi
 +ctags: CTAGS
 +CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 +              $(TAGS_FILES) $(LISP)
 +      list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 +      unique=`for i in $$list; do \
 +          if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 +        done | \
 +        $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 +            END { if (nonempty) { for (i in files) print i; }; }'`; \
 +      test -z "$(CTAGS_ARGS)$$unique" \
 +        || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 +           $$unique
 +
 +GTAGS:
 +      here=`$(am__cd) $(top_builddir) && pwd` \
 +        && $(am__cd) $(top_srcdir) \
 +        && gtags -i $(GTAGS_ARGS) "$$here"
 +
 +distclean-tags:
 +      -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 +
 +distdir: $(DISTFILES)
 +      @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 +      topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 +      list='$(DISTFILES)'; \
 +        dist_files=`for file in $$list; do echo $$file; done | \
 +        sed -e "s|^$$srcdirstrip/||;t" \
 +            -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 +      case $$dist_files in \
 +        */*) $(MKDIR_P) `echo "$$dist_files" | \
 +                         sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 +                         sort -u` ;; \
 +      esac; \
 +      for file in $$dist_files; do \
 +        if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 +        if test -d $$d/$$file; then \
 +          dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 +          if test -d "$(distdir)/$$file"; then \
 +            find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 +          fi; \
 +          if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 +            cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 +            find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 +          fi; \
 +          cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 +        else \
 +          test -f "$(distdir)/$$file" \
 +          || cp -p $$d/$$file "$(distdir)/$$file" \
 +          || exit 1; \
 +        fi; \
 +      done
 +check-am: all-am
 +check: $(BUILT_SOURCES)
 +      $(MAKE) $(AM_MAKEFLAGS) check-am
 +all-am: Makefile $(LTLIBRARIES) $(HEADERS)
 +installdirs:
 +      for dir in "$(DESTDIR)$(gssdir)" "$(DESTDIR)$(krb5pluginsdir)" "$(DESTDIR)$(gssincludedir)"; do \
 +        test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 +      done
 +install: $(BUILT_SOURCES)
 +      $(MAKE) $(AM_MAKEFLAGS) install-am
 +install-exec: install-exec-am
 +install-data: install-data-am
 +uninstall: uninstall-am
 +
 +install-am: all-am
 +      @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 +
 +installcheck: installcheck-am
 +install-strip:
 +      $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 +        install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 +        `test -z '$(STRIP)' || \
 +          echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 +mostlyclean-generic:
 +
 +distclean-generic:
 +      -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 +      -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 +
 +maintainer-clean-generic:
 +      @echo "This command is intended for maintainers to use"
 +      @echo "it deletes files that may require special tools to rebuild."
 +      -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 +clean: clean-am
 +
 +clean-am: clean-generic clean-gssLTLIBRARIES \
 +      clean-krb5pluginsLTLIBRARIES clean-libtool mostlyclean-am
 +
 +distclean: distclean-am
 +      -rm -rf ./$(DEPDIR)
 +      -rm -f Makefile
 +distclean-am: clean-am distclean-compile distclean-generic \
 +      distclean-tags
 +
 +dvi: dvi-am
 +
 +dvi-am:
 +
 +html: html-am
 +
 +html-am:
 +
 +info: info-am
 +
 +info-am:
 +
 +install-data-am: install-gssLTLIBRARIES install-gssincludeHEADERS \
 +      install-krb5pluginsLTLIBRARIES
 +
 +install-dvi: install-dvi-am
 +
 +install-dvi-am:
 +
 +install-exec-am:
 +
 +install-html: install-html-am
 +
 +install-html-am:
 +
 +install-info: install-info-am
 +
 +install-info-am:
 +
 +install-man:
 +
 +install-pdf: install-pdf-am
 +
 +install-pdf-am:
 +
 +install-ps: install-ps-am
 +
 +install-ps-am:
 +
 +installcheck-am:
 +
 +maintainer-clean: maintainer-clean-am
 +      -rm -rf ./$(DEPDIR)
 +      -rm -f Makefile
 +maintainer-clean-am: distclean-am maintainer-clean-generic
 +
 +mostlyclean: mostlyclean-am
 +
 +mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 +      mostlyclean-libtool
 +
 +pdf: pdf-am
 +
 +pdf-am:
 +
 +ps: ps-am
 +
 +ps-am:
 +
 +uninstall-am: uninstall-gssLTLIBRARIES uninstall-gssincludeHEADERS \
 +      uninstall-krb5pluginsLTLIBRARIES
 +
 +.MAKE: all check install install-am install-strip
 +
 +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 +      clean-gssLTLIBRARIES clean-krb5pluginsLTLIBRARIES \
 +      clean-libtool ctags distclean distclean-compile \
 +      distclean-generic distclean-libtool distclean-tags distdir dvi \
 +      dvi-am html html-am info info-am install install-am \
 +      install-data install-data-am install-dvi install-dvi-am \
 +      install-exec install-exec-am install-gssLTLIBRARIES \
 +      install-gssincludeHEADERS install-html install-html-am \
 +      install-info install-info-am install-krb5pluginsLTLIBRARIES \
 +      install-man install-pdf install-pdf-am install-ps \
 +      install-ps-am install-strip installcheck installcheck-am \
 +      installdirs maintainer-clean maintainer-clean-generic \
 +      mostlyclean mostlyclean-compile mostlyclean-generic \
 +      mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 +      uninstall-am uninstall-gssLTLIBRARIES \
 +      uninstall-gssincludeHEADERS uninstall-krb5pluginsLTLIBRARIES
 +
 +
 +gsseap_err.h gsseap_err.c: gsseap_err.et
 +      $(COMPILE_ET) $<
 +
 +radsec_err.h radsec_err.c: radsec_err.et
 +      $(COMPILE_ET) $<
 +
 +radsec_err.c: radsec_err.h
 +
 +clean-generic:
 +      rm -f gsseap_err.[ch] radsec_err.[ch]
 +
 +# Tell versions [3.59,3.63) of GNU make to not export all variables.
 +# Otherwise a system limit (for SysV at least) may be exceeded.
 +.NOEXPORT: