1 /* $OpenBSD: servconf.h,v 1.99 2011/06/22 21:57:01 djm Exp $ */
4 * Author: Tatu Ylonen <ylo@cs.hut.fi>
5 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
7 * Definitions for server configuration data and for the functions reading it.
9 * As far as I am concerned, the code I have written for this software
10 * can be used freely for any purpose. Any derived versions of this
11 * software must be clearly marked as such, and if the derived work is
12 * incompatible with the protocol description in the RFC file, it must be
13 * called by a name other than "ssh" or "Secure Shell".
19 #define MAX_PORTS 256 /* Max # ports. */
21 #define MAX_ALLOW_USERS 256 /* Max # users on allow list. */
22 #define MAX_DENY_USERS 256 /* Max # users on deny list. */
23 #define MAX_ALLOW_GROUPS 256 /* Max # groups on allow list. */
24 #define MAX_DENY_GROUPS 256 /* Max # groups on deny list. */
25 #define MAX_SUBSYSTEMS 256 /* Max # subsystems. */
26 #define MAX_HOSTKEYS 256 /* Max # hostkeys. */
27 #define MAX_HOSTCERTS 256 /* Max # host certificates. */
28 #define MAX_ACCEPT_ENV 256 /* Max # of env vars. */
29 #define MAX_MATCH_GROUPS 256 /* Max # of groups for Match. */
30 #define MAX_AUTHKEYS_FILES 256 /* Max # of authorized_keys files. */
32 /* permit_root_login */
33 #define PERMIT_NOT_SET -1
35 #define PERMIT_FORCED_ONLY 1
36 #define PERMIT_NO_PASSWD 2
42 #define PRIVSEP_SANDBOX 2
44 #define DEFAULT_AUTH_FAIL_MAX 6 /* Default for MaxAuthTries */
45 #define DEFAULT_SESSIONS_MAX 10 /* Default for MaxSessions */
47 /* Magic name for internal sftp-server */
48 #define INTERNAL_SFTP_NAME "internal-sftp"
52 u_int ports_from_cmdline;
53 int ports[MAX_PORTS]; /* Port number to listen on. */
54 char *listen_addr; /* Address on which the server listens. */
55 struct addrinfo *listen_addrs; /* Addresses on which the server listens. */
56 int address_family; /* Address family used by the server. */
57 char *host_key_files[MAX_HOSTKEYS]; /* Files containing host keys. */
58 int num_host_key_files; /* Number of files for host keys. */
59 char *host_cert_files[MAX_HOSTCERTS]; /* Files containing host certs. */
60 int num_host_cert_files; /* Number of files for host certs. */
61 char *pid_file; /* Where to put our pid */
62 int server_key_bits;/* Size of the server key. */
63 int login_grace_time; /* Disconnect if no auth in this time
65 int key_regeneration_time; /* Server key lifetime (seconds). */
66 int permit_root_login; /* PERMIT_*, see above */
67 int ignore_rhosts; /* Ignore .rhosts and .shosts. */
68 int ignore_user_known_hosts; /* Ignore ~/.ssh/known_hosts
69 * for RhostsRsaAuth */
70 int print_motd; /* If true, print /etc/motd. */
71 int print_lastlog; /* If true, print lastlog */
72 int x11_forwarding; /* If true, permit inet (spoofing) X11 fwd. */
73 int x11_display_offset; /* What DISPLAY number to start
75 int x11_use_localhost; /* If true, use localhost for fake X11 server. */
76 char *xauth_location; /* Location of xauth program */
77 int strict_modes; /* If true, require string home dir modes. */
78 int tcp_keep_alive; /* If true, set SO_KEEPALIVE. */
79 int ip_qos_interactive; /* IP ToS/DSCP/class for interactive */
80 int ip_qos_bulk; /* IP ToS/DSCP/class for bulk traffic */
81 char *ciphers; /* Supported SSH2 ciphers. */
82 char *macs; /* Supported SSH2 macs. */
83 char *kex_algorithms; /* SSH2 kex methods in order of preference. */
84 int protocol; /* Supported protocol versions. */
85 int gateway_ports; /* If true, allow remote connects to forwarded ports. */
86 SyslogFacility log_facility; /* Facility for system logging. */
87 LogLevel log_level; /* Level for system logging. */
88 int rhosts_rsa_authentication; /* If true, permit rhosts RSA
90 int hostbased_authentication; /* If true, permit ssh2 hostbased auth */
91 int hostbased_uses_name_from_packet_only; /* experimental */
92 int rsa_authentication; /* If true, permit RSA authentication. */
93 int pubkey_authentication; /* If true, permit ssh2 pubkey authentication. */
94 int kerberos_authentication; /* If true, permit Kerberos
96 int kerberos_or_local_passwd; /* If true, permit kerberos
97 * and any other password
98 * authentication mechanism,
101 int kerberos_ticket_cleanup; /* If true, destroy ticket
103 int kerberos_get_afs_token; /* If true, try to get AFS token if
104 * authenticated with Kerberos. */
105 int gss_authentication; /* If true, permit GSSAPI authentication */
106 int gss_cleanup_creds; /* If true, destroy cred cache on logout */
107 int password_authentication; /* If true, permit password
109 int kbd_interactive_authentication; /* If true, permit */
110 int challenge_response_authentication;
111 int zero_knowledge_password_authentication;
112 /* If true, permit jpake auth */
113 int permit_empty_passwd; /* If false, do not permit empty
115 int permit_user_env; /* If true, read ~/.ssh/environment */
116 int use_login; /* If true, login(1) is used */
117 int compression; /* If true, compression is allowed */
118 int allow_tcp_forwarding;
119 int allow_agent_forwarding;
120 u_int num_allow_users;
121 char *allow_users[MAX_ALLOW_USERS];
122 u_int num_deny_users;
123 char *deny_users[MAX_DENY_USERS];
124 u_int num_allow_groups;
125 char *allow_groups[MAX_ALLOW_GROUPS];
126 u_int num_deny_groups;
127 char *deny_groups[MAX_DENY_GROUPS];
129 u_int num_subsystems;
130 char *subsystem_name[MAX_SUBSYSTEMS];
131 char *subsystem_command[MAX_SUBSYSTEMS];
132 char *subsystem_args[MAX_SUBSYSTEMS];
134 u_int num_accept_env;
135 char *accept_env[MAX_ACCEPT_ENV];
137 int max_startups_begin;
138 int max_startups_rate;
142 char *banner; /* SSH-2 banner message */
144 int client_alive_interval; /*
145 * poke the client this often to
146 * see if it's still there
148 int client_alive_count_max; /*
149 * If the client is unresponsive
150 * for this many intervals above,
151 * disconnect the session
154 u_int num_authkeys_files; /* Files containing public keys */
155 char *authorized_keys_files[MAX_AUTHKEYS_FILES];
157 char *adm_forced_command;
159 int use_pam; /* Enable auth via PAM */
163 int num_permitted_opens;
165 char *chroot_directory;
166 char *revoked_keys_file;
167 char *trusted_user_ca_keys;
168 char *authorized_principals_file;
172 * These are string config options that must be copied between the
173 * Match sub-config and the main config, and must be sent from the
174 * privsep slave to the privsep master. We use a macro to ensure all
175 * the options are copied and the copies are done in the correct order.
177 #define COPY_MATCH_STRING_OPTS() do { \
178 M_CP_STROPT(banner); \
179 M_CP_STROPT(trusted_user_ca_keys); \
180 M_CP_STROPT(revoked_keys_file); \
181 M_CP_STROPT(authorized_principals_file); \
182 M_CP_STRARRAYOPT(authorized_keys_files, num_authkeys_files); \
185 void initialize_server_options(ServerOptions *);
186 void fill_default_server_options(ServerOptions *);
187 int process_server_config_line(ServerOptions *, char *, const char *, int,
188 int *, const char *, const char *, const char *);
189 void load_server_config(const char *, Buffer *);
190 void parse_server_config(ServerOptions *, const char *, Buffer *,
191 const char *, const char *, const char *);
192 void parse_server_match_config(ServerOptions *, const char *, const char *,
194 void copy_set_server_options(ServerOptions *, ServerOptions *, int);
195 void dump_config(ServerOptions *);
196 char *derelativise_path(const char *);
198 #endif /* SERVCONF_H */