3 - Threads are allocated with a 32 KB stack rather than what
4 happens to be the default. Patch by Fabian Mauchle.
5 - On systems with mallopt(3), freed memory is returned to the
6 system more aggressively. Patch by Fabian Mauchle.
9 - The duplication cache is purged properly. Patch by Fabian
11 - Stop freeing a shared piece of memory manifesting itself as a
12 crash when using dynamic discovery. Patch by Fabian Mauchle.
13 - Closing and freeing TLS clients properly. Patch by Fabian
15 - Timing out on TLS clients not closing the connection properly.
16 Patch by Fabian Mauchle.
20 - Fix the issue with verification of clients when using multiple
21 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
22 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
23 1.6.2). Reported by Raphael Geissert.
27 - When verifying clients, don't consider config blocks with CA
28 settings ('tls') which differ from the one used for verifying the
29 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
33 - Make naptr-eduroam.sh check NAPTR type case insensitively.
34 Fix from Adam Osuchowski.
38 - The default shared secret for TLS and DTLS connections change
39 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
40 section 2.3 (4). Please make sure to specify a secret in both
41 client and server blocks to avoid unwanted surprises.
43 - The default place to look for a configuration file has changed
44 from /etc to /usr/local/etc. Let radsecproxy know where your
45 configuration file can be found by using the `-c' command line
46 option. Or configure radsecproxy with --sysconfdir=/etc to
47 restore the old behaviour. (RADSECPROXY-31)
50 - Improved F-Ticks logging options. F-Ticks can now be sent to a
51 separate syslog facility and the VISINST label can now be
52 configured explicitly. This was implemented by Maja
53 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
54 - New config option PidFile. (RADSECPROXY-32)
55 - Preliminary support for DynamicLookupCommand added. It's for
56 TLS servers only at this point. Also, beware of risks for memory
57 leaks. In addition to this, for extra adventurous users, there's
58 a new configure option --enable-experimental-dyndisc which enables
59 even more new code for handling of dynamic discovery of TLS
61 - Address family (IPv4 or IPv6) can now be specified for clients
62 and servers. (RADSECPROXY-37)
65 - Stop the autoconfery from warning about defining variables
66 conditionally and unconditionally.
67 - Honour configure option --sysconfdir. (RADSECPROXY-31)
68 - Don't crash on failing DynamicLookupCommand scripts. Fix made
69 with help from Ralf Paffrath. (RADSECPROXY-33)
70 - When a DynamicLookupCommand script is failing, fall back to
71 other server(s) in the realm. The timeout depends on the kind of
73 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
77 - Support for F-Ticks logging.
78 - New binary radsecproxy-hash.
79 - A DynamicLookupCommand script can now signal "server not found"
80 by exiting with code 10. The scripts in the tools directory now
84 - catgconf renamed to radsecproxy-conf.
87 - All compiler warnings removed. Now compiling with -Werror.
91 - The default secret for TLS and DTLS will change in a future
92 release. Please make sure to specify a secret in both client and
93 server blocks to avoid surprises.
96 - Debug printout issue.
100 - Don't disable OpenSSL session caching for 0.9.8p and newer in
102 - Detect OpenSSL version at runtime rather than at compile time.
106 - OpenSSL session caching is disabled when built against OpenSSL
107 older than 1.0.0b to mitigate possible effects of
108 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
109 - Crash bug when reading improper config file fixed.
112 Incompatible changes:
113 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
114 to keep the same behaviour as in previous versions of radsecproxy,
115 those who have LogLevel set to 4 need to change this to 5. Log
116 levels 1, 2 and 3 are unaffected.
118 New features and various improvements:
119 - LoopPrevention per server has been added.
120 - AddVendorAttribute rewrite configuration has been added.
121 - New log level, DBG_NOTICE, added.
122 - Diagnostics improved for errors resulting from failing syscalls.
123 - Removed all compiler warnings (compiling with -Wall).
126 - A UDP fragmentation issue.
127 - Build on Solaris when compiling with gcc.
128 - A bug in pwdencrypt() with passwords of a length greater than
132 Fixed header files for FreeBSD
133 Fix for multiple UDP servers on same IP address, solves accounting
137 Fixed some very minor bugs
138 Changed log levels for some messages, made loglevel 2 default
141 Client and Server blocks may contain multiple host options.
142 Configure (Makefile) options for specifying which transports
143 should be supported in a build.
146 Support for TCP and DTLS transports (type tcp, type dtls)
147 Listen... options can be specified multiple times
148 Dynamic server discovery
149 DuplicateInterval option in client block for specifying for how
150 long a request/reply shall be stored for duplicate detection
151 Support for RADIUS TTL (hopcount) attribute. Decrements value of
152 the TTL attribute if present, discards message if becomes 0.
153 If addTTL option is used, the TTL attribute is added with the
154 specified value if the forwarded message does not have one.
155 PolicyOID option can be used to require certain CA policies.
158 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
159 Old options deprecated but available for backwards compatiblity
160 Logging reply-message attribute from Reject messages
161 Contribution from Arne Schwabe
162 Rewrite blocks have new options addAttribute and modifyAttribute
163 rewriteIn (replacing rewrite) and rewriteOut in client and server
164 blocks for specifying rewrite on input/output. rewrite deprecated
165 but available as an alias for rewriteIn for backwards compatibility.
166 rewritein rewriteout rewrite
167 regular expressions in realms etc can now be more advanced, including
169 cacheExpiry option in tls blocks for specifying expiry time for the
170 cache of CA certificates and CRLs. This is particularly useful for
171 regularly updating CRLs.
172 Some logging has been made more informative
175 Logging stationid attribute
176 Added LoopPrevention option
177 Failover also without status-server
178 Options for RetryCount and RetryInterval
179 Working accounting and AccountingResponse option
180 CRL checking and option for enabling it
183 No longer looks for radsecproxy.conf in current directory
184 Rewrite block that allows removal of specified attributes
185 certificateNameCheck option for disabling CN/SubjectAltName check
186 matchCertificateAttribute now also supports CN matching
187 Forwarding of accounting messages, accountingServer option for realms
188 Supports multiple client blocks for same source address with different
190 Removed weekday from log timestamps
193 Pretend option for validating configuration
194 Include option for including additional config files
195 Allows clients configured by IP prefix, dynamic clients
196 Server failover support
197 Rewriting of username attribute
198 Source address and port can be specified for requests
201 Fixed crash when servers were configured after first realm block