3 - When verifying clients, don't consider config blocks with CA
4 settings ('tls') which differ from the one used for verifying the
5 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43)
8 - Make naptr-eduroam.sh check NAPTR type case insensitively.
9 Fix from Adam Osuchowski.
13 - The default shared secret for TLS and DTLS connections change
14 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
15 section 2.3 (4). Please make sure to specify a secret in both
16 client and server blocks to avoid unwanted surprises.
18 - The default place to look for a configuration file has changed
19 from /etc to /usr/local/etc. Let radsecproxy know where your
20 configuration file can be found by using the `-c' command line
21 option. Or configure radsecproxy with --sysconfdir=/etc to
22 restore the old behaviour. (RADSECPROXY-31)
25 - Improved F-Ticks logging options. F-Ticks can now be sent to a
26 separate syslog facility and the VISINST label can now be
27 configured explicitly. This was implemented by Maja
28 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
29 - New config option PidFile. (RADSECPROXY-32)
30 - Preliminary support for DynamicLookupCommand added. It's for
31 TLS servers only at this point. Also, beware of risks for memory
32 leaks. In addition to this, for extra adventurous users, there's
33 a new configure option --enable-experimental-dyndisc which enables
34 even more new code for handling of dynamic discovery of TLS
36 - Address family (IPv4 or IPv6) can now be specified for clients
37 and servers. (RADSECPROXY-37)
40 - Stop the autoconfery from warning about defining variables
41 conditionally and unconditionally.
42 - Honour configure option --sysconfdir. (RADSECPROXY-31)
43 - Don't crash on failing DynamicLookupCommand scripts. Fix made
44 with help from Ralf Paffrath. (RADSECPROXY-33)
45 - When a DynamicLookupCommand script is failing, fall back to
46 other server(s) in the realm. The timeout depends on the kind of
48 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
52 - Support for F-Ticks logging.
53 - New binary radsecproxy-hash.
54 - A DynamicLookupCommand script can now signal "server not found"
55 by exiting with code 10. The scripts in the tools directory now
59 - catgconf renamed to radsecproxy-conf.
62 - All compiler warnings removed. Now compiling with -Werror.
66 - The default secret for TLS and DTLS will change in a future
67 release. Please make sure to specify a secret in both client and
68 server blocks to avoid surprises.
71 - Debug printout issue.
75 - Don't disable OpenSSL session caching for 0.9.8p and newer in
77 - Detect OpenSSL version at runtime rather than at compile time.
81 - OpenSSL session caching is disabled when built against OpenSSL
82 older than 1.0.0b to mitigate possible effects of
83 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
84 - Crash bug when reading improper config file fixed.
88 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
89 to keep the same behaviour as in previous versions of radsecproxy,
90 those who have LogLevel set to 4 need to change this to 5. Log
91 levels 1, 2 and 3 are unaffected.
93 New features and various improvements:
94 - LoopPrevention per server has been added.
95 - AddVendorAttribute rewrite configuration has been added.
96 - New log level, DBG_NOTICE, added.
97 - Diagnostics improved for errors resulting from failing syscalls.
98 - Removed all compiler warnings (compiling with -Wall).
101 - A UDP fragmentation issue.
102 - Build on Solaris when compiling with gcc.
103 - A bug in pwdencrypt() with passwords of a length greater than
107 Fixed header files for FreeBSD
108 Fix for multiple UDP servers on same IP address, solves accounting
112 Fixed some very minor bugs
113 Changed log levels for some messages, made loglevel 2 default
116 Client and Server blocks may contain multiple host options.
117 Configure (Makefile) options for specifying which transports
118 should be supported in a build.
121 Support for TCP and DTLS transports (type tcp, type dtls)
122 Listen... options can be specified multiple times
123 Dynamic server discovery
124 DuplicateInterval option in client block for specifying for how
125 long a request/reply shall be stored for duplicate detection
126 Support for RADIUS TTL (hopcount) attribute. Decrements value of
127 the TTL attribute if present, discards message if becomes 0.
128 If addTTL option is used, the TTL attribute is added with the
129 specified value if the forwarded message does not have one.
130 PolicyOID option can be used to require certain CA policies.
133 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
134 Old options deprecated but available for backwards compatiblity
135 Logging reply-message attribute from Reject messages
136 Contribution from Arne Schwabe
137 Rewrite blocks have new options addAttribute and modifyAttribute
138 rewriteIn (replacing rewrite) and rewriteOut in client and server
139 blocks for specifying rewrite on input/output. rewrite deprecated
140 but available as an alias for rewriteIn for backwards compatibility.
141 rewritein rewriteout rewrite
142 regular expressions in realms etc can now be more advanced, including
144 cacheExpiry option in tls blocks for specifying expiry time for the
145 cache of CA certificates and CRLs. This is particularly useful for
146 regularly updating CRLs.
147 Some logging has been made more informative
150 Logging stationid attribute
151 Added LoopPrevention option
152 Failover also without status-server
153 Options for RetryCount and RetryInterval
154 Working accounting and AccountingResponse option
155 CRL checking and option for enabling it
158 No longer looks for radsecproxy.conf in current directory
159 Rewrite block that allows removal of specified attributes
160 certificateNameCheck option for disabling CN/SubjectAltName check
161 matchCertificateAttribute now also supports CN matching
162 Forwarding of accounting messages, accountingServer option for realms
163 Supports multiple client blocks for same source address with different
165 Removed weekday from log timestamps
168 Pretend option for validating configuration
169 Include option for including additional config files
170 Allows clients configured by IP prefix, dynamic clients
171 Server failover support
172 Rewriting of username attribute
173 Source address and port can be specified for requests
176 Fixed crash when servers were configured after first realm block