3 - Fix a crash bug introduced in 1.6.4. Fixes RADSECPROXY-53,
8 - Keeping Proxy-State attributes in all replies to clients
9 (RADSECPROXY-52). Reported by Stefan Winter.
13 - Threads are allocated with a 32 KB stack rather than what
14 happens to be the default. Patch by Fabian Mauchle.
15 - On systems with mallopt(3), freed memory is returned to the
16 system more aggressively. Patch by Fabian Mauchle.
19 - radsecproxy-hash(1) no longer prints the hash four times.
20 Reported by Simon Lundström and jocar.
21 - Escaped slashes in regular expressions now works. Reported by
22 Duarte Fonseca. (RADSECPROXY-51)
23 - The duplication cache is purged properly. Patch by Fabian
25 - Stop freeing a shared piece of memory manifesting itself as a
26 crash when using dynamic discovery. Patch by Fabian Mauchle.
27 - Closing and freeing TLS clients properly. Patch by Fabian
29 - Timing out on TLS clients not closing the connection properly.
30 Patch by Fabian Mauchle.
34 - Fix the issue with verification of clients when using multiple
35 'tls' config blocks (RADSECPROXY-43) for DTLS too. Fixes
36 CVE-2012-4566 (CVE id corrected 2012-11-01, after the release of
37 1.6.2). Reported by Raphael Geissert.
41 - When verifying clients, don't consider config blocks with CA
42 settings ('tls') which differ from the one used for verifying the
43 certificate chain. Reported by Ralf Paffrath. (RADSECPROXY-43,
47 - Make naptr-eduroam.sh check NAPTR type case insensitively.
48 Fix from Adam Osuchowski.
52 - The default shared secret for TLS and DTLS connections change
53 from "mysecret" to "radsec" as per draft-ietf-radext-radsec-12
54 section 2.3 (4). Please make sure to specify a secret in both
55 client and server blocks to avoid unwanted surprises.
57 - The default place to look for a configuration file has changed
58 from /etc to /usr/local/etc. Let radsecproxy know where your
59 configuration file can be found by using the `-c' command line
60 option. Or configure radsecproxy with --sysconfdir=/etc to
61 restore the old behaviour. (RADSECPROXY-31)
64 - Improved F-Ticks logging options. F-Ticks can now be sent to a
65 separate syslog facility and the VISINST label can now be
66 configured explicitly. This was implemented by Maja
67 Gorecka-Wolniewicz and Paweł Gołaszewski. (RADSECPROXY-29)
68 - New config option PidFile. (RADSECPROXY-32)
69 - Preliminary support for DynamicLookupCommand added. It's for
70 TLS servers only at this point. Also, beware of risks for memory
71 leaks. In addition to this, for extra adventurous users, there's
72 a new configure option --enable-experimental-dyndisc which enables
73 even more new code for handling of dynamic discovery of TLS
75 - Address family (IPv4 or IPv6) can now be specified for clients
76 and servers. (RADSECPROXY-37)
79 - Stop the autoconfery from warning about defining variables
80 conditionally and unconditionally.
81 - Honour configure option --sysconfdir. (RADSECPROXY-31)
82 - Don't crash on failing DynamicLookupCommand scripts. Fix made
83 with help from Ralf Paffrath. (RADSECPROXY-33)
84 - When a DynamicLookupCommand script is failing, fall back to
85 other server(s) in the realm. The timeout depends on the kind of
87 - Other bugs. (RADSECPROXY-26, -28, -34, -35, -39, -40)
91 - Support for F-Ticks logging.
92 - New binary radsecproxy-hash.
93 - A DynamicLookupCommand script can now signal "server not found"
94 by exiting with code 10. The scripts in the tools directory now
98 - catgconf renamed to radsecproxy-conf.
101 - All compiler warnings removed. Now compiling with -Werror.
105 - The default secret for TLS and DTLS will change in a future
106 release. Please make sure to specify a secret in both client and
107 server blocks to avoid surprises.
110 - Debug printout issue.
114 - Don't disable OpenSSL session caching for 0.9.8p and newer in
116 - Detect OpenSSL version at runtime rather than at compile time.
120 - OpenSSL session caching is disabled when built against OpenSSL
121 older than 1.0.0b to mitigate possible effects of
122 http://openssl.org/news/secadv_20101116.txt (RADSECPROXY-14).
123 - Crash bug when reading improper config file fixed.
126 Incompatible changes:
127 - Log level 4 used to be DBG_DBG but is now DBG_NOTICE. In order
128 to keep the same behaviour as in previous versions of radsecproxy,
129 those who have LogLevel set to 4 need to change this to 5. Log
130 levels 1, 2 and 3 are unaffected.
132 New features and various improvements:
133 - LoopPrevention per server has been added.
134 - AddVendorAttribute rewrite configuration has been added.
135 - New log level, DBG_NOTICE, added.
136 - Diagnostics improved for errors resulting from failing syscalls.
137 - Removed all compiler warnings (compiling with -Wall).
140 - A UDP fragmentation issue.
141 - Build on Solaris when compiling with gcc.
142 - A bug in pwdencrypt() with passwords of a length greater than
146 Fixed header files for FreeBSD
147 Fix for multiple UDP servers on same IP address, solves accounting
151 Fixed some very minor bugs
152 Changed log levels for some messages, made loglevel 2 default
155 Client and Server blocks may contain multiple host options.
156 Configure (Makefile) options for specifying which transports
157 should be supported in a build.
160 Support for TCP and DTLS transports (type tcp, type dtls)
161 Listen... options can be specified multiple times
162 Dynamic server discovery
163 DuplicateInterval option in client block for specifying for how
164 long a request/reply shall be stored for duplicate detection
165 Support for RADIUS TTL (hopcount) attribute. Decrements value of
166 the TTL attribute if present, discards message if becomes 0.
167 If addTTL option is used, the TTL attribute is added with the
168 specified value if the forwarded message does not have one.
169 PolicyOID option can be used to require certain CA policies.
172 listenTCP and sourceTCP options renamed to listenTLS and sourceTLS
173 Old options deprecated but available for backwards compatiblity
174 Logging reply-message attribute from Reject messages
175 Contribution from Arne Schwabe
176 Rewrite blocks have new options addAttribute and modifyAttribute
177 rewriteIn (replacing rewrite) and rewriteOut in client and server
178 blocks for specifying rewrite on input/output. rewrite deprecated
179 but available as an alias for rewriteIn for backwards compatibility.
180 rewritein rewriteout rewrite
181 regular expressions in realms etc can now be more advanced, including
183 cacheExpiry option in tls blocks for specifying expiry time for the
184 cache of CA certificates and CRLs. This is particularly useful for
185 regularly updating CRLs.
186 Some logging has been made more informative
189 Logging stationid attribute
190 Added LoopPrevention option
191 Failover also without status-server
192 Options for RetryCount and RetryInterval
193 Working accounting and AccountingResponse option
194 CRL checking and option for enabling it
197 No longer looks for radsecproxy.conf in current directory
198 Rewrite block that allows removal of specified attributes
199 certificateNameCheck option for disabling CN/SubjectAltName check
200 matchCertificateAttribute now also supports CN matching
201 Forwarding of accounting messages, accountingServer option for realms
202 Supports multiple client blocks for same source address with different
204 Removed weekday from log timestamps
207 Pretend option for validating configuration
208 Include option for including additional config files
209 Allows clients configured by IP prefix, dynamic clients
210 Server failover support
211 Rewriting of username attribute
212 Source address and port can be specified for requests
215 Fixed crash when servers were configured after first realm block