TO-DO FOR FULL PILOT VERSION (by July 1, 2013)
============================
-- Check rp_realm COI membership in TR
-- Check idp_realm APC membership in TR
-- Add key confirmation to TID protocol
-- Check gss_name on incoming TID request in TR (in TIDS, too?)
+DONE Check rp_realm COI membership in TR
+DONE Check idp_realm APC membership in TR
+DONE Check gss_name on incoming TID request in TR (in TIDS, too?)
- Add Request ID to TID messages (req'd for mult simultaneous reqs)
-- Fix issue with how DH params are handled in the TR (API clean-up)
- Handle per-request community configuration in AAA proxy
- Normalize/configure logging for info, warnings and errors (log4c)
- Clean-up gsscon API and messages
-- Add accessors for all externally accessible data structures, etc.
-- Formalize API for integration with RADIUS servers
-- Figure out what to do about commented-out checks in gsscon_passive.c
+DONE Add accessors for all externally accessible data structures, etc.
+DONE Formalize API for integration with RADIUS servers
+DONE Figure out what to do about commented-out checks in gsscon_passive.c
- Handle IPv6 addresses in TID req/resp (use getaddrinfo())
-- Implement rp_permitted filters (incl. general filtering mechanism)
-- Add constraints to TID req in TR, store and use them in AAA Server
+DONE Implement rp_permitted filters (incl. general filtering mechanism)
+DONE Add constraints to TID req in TR, store and use them in AAA Server
- Use valgrind to check for memory leaks, other issues
- Resolve remaining TBDs
-- Full functional testing
+DONE Full functional testing
TO-DO FOR PRODUCTION VERSION (expected in August 2013)
============================
+++ /dev/null
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2012-10-14.11; # UTC
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" "" $nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
- file=$1
- case $file in
- / | /[!/]*) # absolute file, and not a UNC file
- if test -z "$file_conv"; then
- # lazily determine how to convert abs files
- case `uname -s` in
- MINGW*)
- file_conv=mingw
- ;;
- CYGWIN*)
- file_conv=cygwin
- ;;
- *)
- file_conv=wine
- ;;
- esac
- fi
- case $file_conv/,$2, in
- *,$file_conv,*)
- ;;
- mingw/*)
- file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
- ;;
- cygwin/*)
- file=`cygpath -m "$file" || echo "$file"`
- ;;
- wine/*)
- file=`winepath -w "$file" || echo "$file"`
- ;;
- esac
- ;;
- esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
- func_file_conv "$1"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
- lib=$1
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- lib=$dir/$lib.dll.lib
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- lib=$dir/$lib.lib
- break
- fi
- if test -f "$dir/lib$lib.a"; then
- found=yes
- lib=$dir/lib$lib.a
- break
- fi
- done
- IFS=$save_IFS
-
- if test "$found" != yes; then
- lib=$lib.lib
- fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
- # Assume a capable shell
- lib_path=
- shared=:
- linker_opts=
- for arg
- do
- if test -n "$eat"; then
- eat=
- else
- case $1 in
- -o)
- # configure might choose to run compile as 'compile cc -o foo foo.c'.
- eat=1
- case $2 in
- *.o | *.[oO][bB][jJ])
- func_file_conv "$2"
- set x "$@" -Fo"$file"
- shift
- ;;
- *)
- func_file_conv "$2"
- set x "$@" -Fe"$file"
- shift
- ;;
- esac
- ;;
- -I)
- eat=1
- func_file_conv "$2" mingw
- set x "$@" -I"$file"
- shift
- ;;
- -I*)
- func_file_conv "${1#-I}" mingw
- set x "$@" -I"$file"
- shift
- ;;
- -l)
- eat=1
- func_cl_dashl "$2"
- set x "$@" "$lib"
- shift
- ;;
- -l*)
- func_cl_dashl "${1#-l}"
- set x "$@" "$lib"
- shift
- ;;
- -L)
- eat=1
- func_cl_dashL "$2"
- ;;
- -L*)
- func_cl_dashL "${1#-L}"
- ;;
- -static)
- shared=false
- ;;
- -Wl,*)
- arg=${1#-Wl,}
- save_ifs="$IFS"; IFS=','
- for flag in $arg; do
- IFS="$save_ifs"
- linker_opts="$linker_opts $flag"
- done
- IFS="$save_ifs"
- ;;
- -Xlinker)
- eat=1
- linker_opts="$linker_opts $2"
- ;;
- -*)
- set x "$@" "$1"
- shift
- ;;
- *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
- func_file_conv "$1"
- set x "$@" -Tp"$file"
- shift
- ;;
- *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
- func_file_conv "$1" mingw
- set x "$@" "$file"
- shift
- ;;
- *)
- set x "$@" "$1"
- shift
- ;;
- esac
- fi
- shift
- done
- if test -n "$linker_opts"; then
- linker_opts="-link$linker_opts"
- fi
- exec "$@" $linker_opts
- exit 1
-}
-
-eat=
-
-case $1 in
- '')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "compile $scriptversion"
- exit $?
- ;;
- cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
- func_cl_wrapper "$@" # Doesn't return...
- ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
- if test -n "$eat"; then
- eat=
- else
- case $1 in
- -o)
- # configure might choose to run compile as 'compile cc -o foo foo.c'.
- # So we strip '-o arg' only if arg is an object.
- eat=1
- case $2 in
- *.o | *.obj)
- ofile=$2
- ;;
- *)
- set x "$@" -o "$2"
- shift
- ;;
- esac
- ;;
- *.c)
- cfile=$1
- set x "$@" "$1"
- shift
- ;;
- *)
- set x "$@" "$1"
- shift
- ;;
- esac
- fi
- shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
- # If no '-o' option was seen then we might have been invoked from a
- # pattern rule where we don't need one. That is ok -- this is a
- # normal compilation that the losing compiler can handle. If no
- # '.c' file was seen then we are probably linking. That is also
- # ok.
- exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file. Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
- if mkdir "$lockdir" >/dev/null 2>&1; then
- break
- fi
- sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
- test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
- test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#! /bin/sh
-# test-driver - basic testsuite driver script.
-
-scriptversion=2013-07-13.22; # UTC
-
-# Copyright (C) 2011-2013 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-# Make unconditional expansion of undefined variables an error. This
-# helps a lot in preventing typo-related bugs.
-set -u
-
-usage_error ()
-{
- echo "$0: $*" >&2
- print_usage >&2
- exit 2
-}
-
-print_usage ()
-{
- cat <<END
-Usage:
- test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
- [--expect-failure={yes|no}] [--color-tests={yes|no}]
- [--enable-hard-errors={yes|no}] [--]
- TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
-The '--test-name', '--log-file' and '--trs-file' options are mandatory.
-END
-}
-
-test_name= # Used for reporting.
-log_file= # Where to save the output of the test script.
-trs_file= # Where to save the metadata of the test run.
-expect_failure=no
-color_tests=no
-enable_hard_errors=yes
-while test $# -gt 0; do
- case $1 in
- --help) print_usage; exit $?;;
- --version) echo "test-driver $scriptversion"; exit $?;;
- --test-name) test_name=$2; shift;;
- --log-file) log_file=$2; shift;;
- --trs-file) trs_file=$2; shift;;
- --color-tests) color_tests=$2; shift;;
- --expect-failure) expect_failure=$2; shift;;
- --enable-hard-errors) enable_hard_errors=$2; shift;;
- --) shift; break;;
- -*) usage_error "invalid option: '$1'";;
- *) break;;
- esac
- shift
-done
-
-missing_opts=
-test x"$test_name" = x && missing_opts="$missing_opts --test-name"
-test x"$log_file" = x && missing_opts="$missing_opts --log-file"
-test x"$trs_file" = x && missing_opts="$missing_opts --trs-file"
-if test x"$missing_opts" != x; then
- usage_error "the following mandatory options are missing:$missing_opts"
-fi
-
-if test $# -eq 0; then
- usage_error "missing argument"
-fi
-
-if test $color_tests = yes; then
- # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
- red='\e[0;31m' # Red.
- grn='\e[0;32m' # Green.
- lgn='\e[1;32m' # Light green.
- blu='\e[1;34m' # Blue.
- mgn='\e[0;35m' # Magenta.
- std='\e[m' # No color.
-else
- red= grn= lgn= blu= mgn= std=
-fi
-
-do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
-trap "st=129; $do_exit" 1
-trap "st=130; $do_exit" 2
-trap "st=141; $do_exit" 13
-trap "st=143; $do_exit" 15
-
-# Test script is run here.
-"$@" >$log_file 2>&1
-estatus=$?
-if test $enable_hard_errors = no && test $estatus -eq 99; then
- estatus=1
-fi
-
-case $estatus:$expect_failure in
- 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
- 0:*) col=$grn res=PASS recheck=no gcopy=no;;
- 77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
- 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
- *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
- *:*) col=$red res=FAIL recheck=yes gcopy=yes;;
-esac
-
-# Report outcome to console.
-echo "${col}${res}${std}: $test_name"
-
-# Register the test result, and other relevant metadata.
-echo ":test-result: $res" > $trs_file
-echo ":global-test-result: $res" >> $trs_file
-echo ":recheck: $recheck" >> $trs_file
-echo ":copy-in-global-log: $gcopy" >> $trs_file
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
%pre
getent group trustrouter > /dev/null || groupadd -r trustrouter
-getent passwd trustrouter > /dev/null || useradd -r -g trustrouter -d /var/lib/trustrouter -s /sbin/nologin -c "GSS-EAP Trust Router service account" trustrouter
+getent passwd trustrouter > /dev/null || useradd -r -g trustrouter -d /var/lib/trust_router -s /sbin/nologin -c "GSS-EAP Trust Router service account" trustrouter
exit 0