1 # Example wpa_supplicant build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
23 # Driver interface for generic Linux wireless extensions
24 # Note: WEXT is deprecated in the current Linux kernel version and no new
25 # functionality is added to it. nl80211-based interface is the new
26 # replacement for WEXT and its use allows wpa_supplicant to properly control
27 # the driver to improve existing functionality like roaming and to support new
31 # Driver interface for Linux drivers using the nl80211 kernel interface
32 #CONFIG_DRIVER_NL80211=y
35 # QCA vendor extensions to nl80211
36 CONFIG_DRIVER_NL80211_QCA=y
38 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
40 #CFLAGS += -I/usr/local/include
41 #LIBS += -L/usr/local/lib
42 #LIBS_p += -L/usr/local/lib
43 #LIBS_c += -L/usr/local/lib
45 # Driver interface for Windows NDIS
47 #CFLAGS += -I/usr/include/w32api/ddk
48 #LIBS += -L/usr/local/lib
49 # For native build using mingw
50 #CONFIG_NATIVE_WINDOWS=y
51 # Additional directories for cross-compilation on Linux host for mingw target
52 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
53 #LIBS += -L/opt/mingw/mingw32/lib
55 # By default, driver_ndis uses WinPcap for low-level operations. This can be
56 # replaced with the following option which replaces WinPcap calls with NDISUIO.
57 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
59 # CONFIG_USE_NDISUIO=y
61 # Driver interface for wired Ethernet drivers
62 #CONFIG_DRIVER_WIRED=y
64 # Driver interface for the Broadcom RoboSwitch family
65 #CONFIG_DRIVER_ROBOSWITCH=y
67 # Driver interface for no driver (e.g., WPS ER only)
71 #LIBS += -lsocket -ldlpi -lnsl
74 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
76 CONFIG_IEEE8021X_EAPOL=y
94 # Note: Default OpenSSL package does not include support for all the
95 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
96 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
97 # to add the needed functions.
106 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
109 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
112 # EAP-pwd (secure authentication using only a password)
121 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
124 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
125 # This requires CONFIG_EAP_AKA to be enabled, too.
126 CONFIG_EAP_AKA_PRIME=y
128 # Enable USIM simulator (Milenage) for EAP-AKA
129 #CONFIG_USIM_SIMULATOR=y
136 # Include support for optional SHA256 cipher suite in EAP-GPSK
137 #CONFIG_EAP_GPSK_SHA256=y
139 # EAP-TNC and related Trusted Network Connect support (experimental)
142 # Wi-Fi Protected Setup (WPS)
144 # Enable WPS external registrar functionality
146 # Disable credentials for an open network by default when acting as a WPS
148 #CONFIG_WPS_REG_DISABLE_OPEN=y
149 # Enable WPS support with NFC config method
155 # PKCS#12 (PFX) support (used to read private key and certificate file from
156 # a file that usually has extension .p12 or .pfx)
159 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
163 # PC/SC interface for smartcards (USIM, GSM SIM)
164 # Enable this if EAP-SIM or EAP-AKA is included
167 # Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
168 #CONFIG_HT_OVERRIDES=y
170 # Support VHT overrides (disable VHT, mask MCS rates, etc.)
171 #CONFIG_VHT_OVERRIDES=y
173 # Development testing
176 # Select control interface backend for external programs, e.g, wpa_cli:
177 # unix = UNIX domain sockets (default for Linux/*BSD)
178 # udp = UDP sockets using localhost (127.0.0.1)
179 # named_pipe = Windows Named Pipe (default for Windows)
180 # udp-remote = UDP sockets with remote access (only for tests systems/purpose)
181 # y = use default (backwards compatibility)
182 # If this option is commented out, control interface is not included in the
186 # Include support for GNU Readline and History Libraries in wpa_cli.
187 # When building a wpa_cli binary for distribution, please note that these
188 # libraries are licensed under GPL and as such, BSD license may not apply for
189 # the resulting binary.
192 # Include internal line edit mode in wpa_cli. This can be used as a replacement
193 # for GNU Readline to provide limited command line editing and history support.
194 CONFIG_WPA_CLI_EDIT=y
196 # Remove debugging code that is printing out debug message to stdout.
197 # This can be used to reduce the size of the wpa_supplicant considerably
198 # if debugging code is not needed. The size reduction can be around 35%
200 #CONFIG_NO_STDOUT_DEBUG=y
202 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
203 # 35-50 kB in code size.
206 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
207 # This option can be used to reduce code size by removing support for
208 # converting ASCII passphrases into PSK. If this functionality is removed, the
209 # PSK can only be configured as the 64-octet hexstring (e.g., from
210 # wpa_passphrase). This saves about 0.5 kB in code size.
211 #CONFIG_NO_WPA_PASSPHRASE=y
213 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
214 # This can be used if ap_scan=1 mode is never enabled.
215 #CONFIG_NO_SCAN_PROCESSING=y
217 # Select configuration backend:
218 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
219 # path is given on command line, not here; this option is just used to
220 # select the backend that allows configuration files to be used)
221 # winreg = Windows registry (see win_example.reg for an example)
224 # Remove configuration write functionality (i.e., to allow the configuration
225 # file to be updated based on runtime configuration changes). The runtime
226 # configuration can still be changed, the changes are just not going to be
227 # persistent over restarts. This option can be used to reduce code size by
229 #CONFIG_NO_CONFIG_WRITE=y
231 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
232 #CONFIG_NO_CONFIG_BLOBS=y
234 # Select program entry point implementation:
235 # main = UNIX/POSIX like main() function (default)
236 # main_winsvc = Windows service (read parameters from registry)
237 # main_none = Very basic example (development use only)
240 # Select wrapper for operating system and C library specific functions
241 # unix = UNIX/POSIX like systems (default)
242 # win32 = Windows systems
243 # none = Empty template
246 # Select event loop implementation
247 # eloop = select() loop (default)
248 # eloop_win = Windows events and WaitForMultipleObject() loop
251 # Should we use poll instead of select? Select is used by default.
254 # Should we use epoll instead of select? Select is used by default.
255 #CONFIG_ELOOP_EPOLL=y
257 # Select layer 2 packet implementation
258 # linux = Linux packet socket (default)
259 # pcap = libpcap/libdnet/WinPcap
260 # freebsd = FreeBSD libpcap
261 # winpcap = WinPcap with receive thread
262 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
263 # none = Empty template
264 CONFIG_L2_PACKET=linux
266 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
269 # IEEE 802.11w (management frame protection), also known as PMF
270 # Driver support is also needed for IEEE 802.11w.
273 # Select TLS implementation
274 # openssl = OpenSSL (default)
276 # internal = Internal TLSv1 implementation (experimental)
277 # none = Empty template
280 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
281 # can be enabled to get a stronger construction of messages when block ciphers
282 # are used. It should be noted that some existing TLS v1.0 -based
283 # implementation may not be compatible with TLS v1.1 message (ClientHello is
284 # sent prior to negotiating which version will be used)
287 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
288 # can be enabled to enable use of stronger crypto algorithms. It should be
289 # noted that some existing TLS v1.0 -based implementation may not be compatible
290 # with TLS v1.2 message (ClientHello is sent prior to negotiating which version
294 # If CONFIG_TLS=internal is used, additional library and include paths are
295 # needed for LibTomMath. Alternatively, an integrated, minimal version of
296 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
297 # and drawbacks of this option.
298 #CONFIG_INTERNAL_LIBTOMMATH=y
299 #ifndef CONFIG_INTERNAL_LIBTOMMATH
300 #LTM_PATH=/usr/src/libtommath-0.39
301 #CFLAGS += -I$(LTM_PATH)
302 #LIBS += -L$(LTM_PATH)
303 #LIBS_p += -L$(LTM_PATH)
305 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
306 # can be configured to include faster routines for exptmod, sqr, and div to
307 # speed up DH and RSA calculation considerably
308 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
310 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
311 # This is only for Windows builds and requires WMI-related header files and
312 # WbemUuid.Lib from Platform SDK even when building with MinGW.
313 #CONFIG_NDIS_EVENTS_INTEGRATED=y
314 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
316 # Add support for old DBus control interface
317 # (fi.epitest.hostap.WPASupplicant)
318 #CONFIG_CTRL_IFACE_DBUS=y
320 # Add support for new DBus control interface
321 # (fi.w1.hostap.wpa_supplicant1)
322 #CONFIG_CTRL_IFACE_DBUS_NEW=y
324 # Add introspection support for new DBus control interface
325 #CONFIG_CTRL_IFACE_DBUS_INTRO=y
327 # Add support for Binder control interface
328 # Only applicable for Android platforms.
329 #CONFIG_CTRL_IFACE_BINDER=y
331 # Add support for loading EAP methods dynamically as shared libraries.
332 # When this option is enabled, each EAP method can be either included
333 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
334 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
335 # be loaded in the beginning of the wpa_supplicant configuration file
336 # (see load_dynamic_eap parameter in the example file) before being used in
337 # the network blocks.
339 # Note that some shared parts of EAP methods are included in the main program
340 # and in order to be able to use dynamic EAP methods using these parts, the
341 # main program must have been build with the EAP method enabled (=y or =dyn).
342 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
343 # unless at least one of them was included in the main build to force inclusion
344 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
345 # in the main build to be able to load these methods dynamically.
347 # Please also note that using dynamic libraries will increase the total binary
348 # size. Thus, it may not be the best option for targets that have limited
349 # amount of memory/flash.
350 #CONFIG_DYNAMIC_EAP_METHODS=y
352 # IEEE Std 802.11r-2008 (Fast BSS Transition)
355 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
358 # Send debug messages to syslog instead of stdout
359 #CONFIG_DEBUG_SYSLOG=y
360 # Set syslog facility for debug messages
361 #CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
363 # Add support for sending all debug messages (regardless of debug verbosity)
364 # to the Linux kernel tracing facility. This helps debug the entire stack by
365 # making it easy to record everything happening from the driver up into the
366 # same file, e.g., using trace-cmd.
367 #CONFIG_DEBUG_LINUX_TRACING=y
369 # Add support for writing debug log to Android logcat instead of standard
373 # Enable privilege separation (see README 'Privilege separation' for details)
376 # Enable mitigation against certain attacks against TKIP by delaying Michael
377 # MIC error reports by a random amount of time between 0 and 60 seconds
378 #CONFIG_DELAYED_MIC_ERROR_REPORT=y
380 # Enable tracing code for developer debugging
381 # This tracks use of memory allocations and other registrations and reports
382 # incorrect use with a backtrace of call (or allocation) location.
384 # For BSD, uncomment these.
386 #LIBS_p += -lexecinfo
387 #LIBS_c += -lexecinfo
389 # Use libbfd to get more details for developer debugging
390 # This enables use of libbfd to get more detailed symbols for the backtraces
391 # generated by CONFIG_WPA_TRACE=y.
392 #CONFIG_WPA_TRACE_BFD=y
393 # For BSD, uncomment these.
394 #LIBS += -lbfd -liberty -lz
395 #LIBS_p += -lbfd -liberty -lz
396 #LIBS_c += -lbfd -liberty -lz
398 # wpa_supplicant depends on strong random number generation being available
399 # from the operating system. os_get_random() function is used to fetch random
400 # data when needed, e.g., for key generation. On Linux and BSD systems, this
401 # works by reading /dev/urandom. It should be noted that the OS entropy pool
402 # needs to be properly initialized before wpa_supplicant is started. This is
403 # important especially on embedded devices that do not have a hardware random
404 # number generator and may by default start up with minimal entropy available
405 # for random number generation.
407 # As a safety net, wpa_supplicant is by default trying to internally collect
408 # additional entropy for generating random data to mix in with the data fetched
409 # from the OS. This by itself is not considered to be very strong, but it may
410 # help in cases where the system pool is not initialized properly. However, it
411 # is very strongly recommended that the system pool is initialized with enough
412 # entropy either by using hardware assisted random number generator or by
413 # storing state over device reboots.
415 # wpa_supplicant can be configured to maintain its own entropy store over
416 # restarts to enhance random number generation. This is not perfect, but it is
417 # much more secure than using the same sequence of random numbers after every
418 # reboot. This can be enabled with -e<entropy file> command line option. The
419 # specified file needs to be readable and writable by wpa_supplicant.
421 # If the os_get_random() is known to provide strong random data (e.g., on
422 # Linux/BSD, the board in question is known to have reliable source of random
423 # data from /dev/urandom), the internal wpa_supplicant random pool can be
424 # disabled. This will save some in binary size and CPU use. However, this
425 # should only be considered for builds that are known to be used on devices
426 # that meet the requirements described above.
427 #CONFIG_NO_RANDOM_POOL=y
429 # IEEE 802.11n (High Throughput) support (mainly for AP mode)
432 # Wireless Network Management (IEEE Std 802.11v-2011)
433 # Note: This is experimental and not complete implementation.
436 # Interworking (IEEE 802.11u)
437 # This can be used to enable functionality to improve interworking with
438 # external networks (GAS/ANQP to learn more about the networks and network
439 # selection based on available credentials).
440 CONFIG_INTERWORKING=y
445 # Disable roaming in wpa_supplicant
448 # AP mode operations with wpa_supplicant
449 # This can be used for controlling AP mode operations with wpa_supplicant. It
450 # should be noted that this is mainly aimed at simple cases like
451 # WPA2-Personal while more complex configurations like WPA2-Enterprise with an
452 # external RADIUS server can be supported with hostapd.
456 # This can be used to enable P2P support in wpa_supplicant. See README-P2P for
457 # more information on P2P operations.
460 # Enable TDLS support
464 # This can be used to enable Wi-Fi Direct extensions for P2P using an external
465 # program to control the additional information exchanges in the messages.
466 CONFIG_WIFI_DISPLAY=y
469 # This can be used to enable automatic scan support in wpa_supplicant.
470 # See wpa_supplicant.conf for more information on autoscan usage.
472 # Enabling directly a module will enable autoscan support.
473 # For exponential module:
474 #CONFIG_AUTOSCAN_EXPONENTIAL=y
475 # For periodic module:
476 #CONFIG_AUTOSCAN_PERIODIC=y
478 # Password (and passphrase, etc.) backend for external storage
479 # These optional mechanisms can be used to add support for storing passwords
480 # and other secrets in external (to wpa_supplicant) location. This allows, for
481 # example, operating system specific key storage to be used
483 # External password backend for testing purposes (developer use)
484 #CONFIG_EXT_PASSWORD_TEST=y
486 # Enable Fast Session Transfer (FST)
489 # Support Multi Band Operation
492 include $(wildcard $(LOCAL_PATH)/android_config_*.inc)