Sync wpa_supplicant man page with README changes

The man page source was not up-to-date with removed driver wrappers,
so bring in the wpa_supplicant/README changes to make this somewhat
closer to the current state.

Signed-hostap: Jouni Malinen <j@w1.fi>

diff --git a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
index d130641..aa20e57 100644 (file)
--- a/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
+++ b/wpa_supplicant/doc/docbook/wpa_supplicant.sgml
@@ -246,28 +246,6 @@
 
     <variablelist>
       <varlistentry>
-       <term>hostap</term>
-       <listitem>
-         <para>(default) Host AP driver (Intersil Prism2/2.5/3).
-         (this can also be used with Linuxant DriverLoader).</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>hermes</term>
-       <listitem>
-         <para>Agere Systems Inc. driver (Hermes-I/Hermes-II).</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>madwifi</term>
-       <listitem>
-         <para>MADWIFI 802.11 support (Atheros, etc.).</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
        <term>wext</term>
        <listitem>
          <para>Linux wireless extensions (generic).</para>
@@ -275,13 +253,6 @@
       </varlistentry>
 
       <varlistentry>
-       <term>broadcom</term>
-       <listitem>
-         <para>Broadcom wl.o driver.</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
        <term>wired</term>
        <listitem>
          <para>wpa_supplicant wired Ethernet driver</para>
@@ -506,8 +477,8 @@ wpa_supplicant -Dnl80211,wext -c/etc/wpa_supplicant.conf -iwlan0
 
 <blockquote><programlisting>
 wpa_supplicant \
-       -c wpa1.conf -i wlan0 -D hostap -N \
-       -c wpa2.conf -i ath0 -D madwifi
+       -c wpa1.conf -i wlan0 -D nl80211 -N \
+       -c wpa2.conf -i ath0 -D wext
 </programlisting></blockquote>
   </refsect1>
 
@@ -537,86 +508,6 @@ wpa_supplicant \
     <title>Supported Drivers</title>
     <variablelist>
       <varlistentry>
-       <term>Host AP driver for Prism2/2.5/3 (development
-       snapshot/v0.2.x)</term>
-       <listitem>
-         <para> (http://hostap.epitest.fi/) Driver needs to be set in
-         Managed mode (<emphasis>iwconfig wlan0 mode managed</emphasis>).
-         Please note that station firmware version needs to be 1.7.0 or
-         newer to work in WPA mode.</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>Linuxant DriverLoader</term>
-       <listitem>
-         <para>(http://www.linuxant.com/driverloader/)
-       with Windows NDIS driver for your wlan card supporting WPA.</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>Agere Systems Inc. Linux Driver</term>
-       <listitem>
-         <para> (http://www.agere.com/support/drivers/) Please note
-       that the driver interface file (driver_hermes.c) and hardware
-       specific include files are not included in the wpa_supplicant
-       distribution. You will need to copy these from the source
-       package of the Agere driver.</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>madwifi driver for cards based on Atheros chip set (ar521x)</term>
-       <listitem>
-         <para> (http://sourceforge.net/projects/madwifi/) Please
-       note that you will need to modify the wpa_supplicant .config
-       file to use the correct path for the madwifi driver root
-       directory (CFLAGS += -I../madwifi/wpa line in example
-       defconfig).</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>Linux ndiswrapper</term>
-       <listitem>
-         <para> (http://ndiswrapper.sourceforge.net/) with Windows
-       NDIS driver.</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>Broadcom wl.o driver</term>
-       <listitem>
-         <para> This is a generic Linux driver for Broadcom IEEE
-       802.11a/g cards.  However, it is proprietary driver that is
-       not publicly available except for couple of exceptions, mainly
-       Broadcom-based APs/wireless routers that use Linux. The driver
-       binary can be downloaded, e.g., from Linksys support site
-       (http://www.linksys.com/support/gpl.asp) for Linksys
-       WRT54G. The GPL tarball includes cross-compiler and the needed
-       header file, wlioctl.h, for compiling wpa_supplicant.  This
-       driver support in wpa_supplicant is expected to work also with
-       other devices based on Broadcom driver (assuming the driver
-       includes client mode support).</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term> Intel ipw2100 driver</term>
-       <listitem>
-         <para> (http://sourceforge.net/projects/ipw2100/)</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
-       <term>Intel ipw2200 driver</term>
-       <listitem>
-         <para> (http://sourceforge.net/projects/ipw2200/)</para>
-       </listitem>
-      </varlistentry>
-
-      <varlistentry>
        <term>Linux wireless extensions</term>
        <listitem>
          <para>In theory, any driver that supports Linux wireless